add initial power module project files

jm-power-50-0.1/main.asm

@@ -0,0 +1,39 @@
+.CHIP   PMS150C
+// Give package map to writer	pcount VDD PA0 PA3 PA4 PA5 PA6 PA7 GND SHORTC_MSK1 SHORTC_MASK1 SHIFT
+.writer package                 8,     1,  7,  5,  6,  4,  3,  2,  8,  0x000D,     0x000D,      4
+//{{PADAUK_CODE_OPTION
+	.Code_Option	Security	Disable
+	.Code_Option	Bootup_Time	Fast
+	.Code_Option	Drive		Normal
+	.Code_Option	LVR		3.0V
+//}}PADAUK_CODE_OPTION
+
+#define RELEASE 1
+
+// all pins on PA
+#define PIN_LED	5
+#define PIN_JACDAC 6
+//#define PIN_LOG 7
+
+#define LED_SINK 1
+
+// Cost given in comment: words of flash/bytes of RAM
+// #define CFG_T16_32BIT 1 // 1/1
+#define CFG_BROADCAST 1 // 20/0
+#define CFG_RESET_IN 1 // 24/1
+#define CFG_FW_ID 0x3592dcb4 // 24/0
+
+#define PWR_SERVICE 1
+
+#define PIN_SWITCH 4
+
+.include ../jd/jdheader.asm
+
+#define PIN_LIMITER 3
+.include ../services/power.asm
+
+main:
+	.ADJUST_IC	SYSCLK=IHRC/2, IHRC=16MHz, VDD=3.3V
+	PADIER = (1 << PIN_JACDAC) | (1 << PIN_LIMITER)	
+
+.include ../jd/jdmain.asm

jm-power-50-0.1/power.prj

@@ -0,0 +1,27 @@
+[INI]
+PROJECT=SINGLE
+[LINKS]
+~main.asm
+[Ram_Break]
+Break1=No 0000
+Break2=No 0000
+Break3=No 0000
+Break4=No 0000
+[Stack_Break]
+Break1=No 0000 00FF
+Break2=No 0000 00FF
+Break3=No 0000 00FF
+Break4=No 0000 00FF
+Break5=No 0000 00FF
+Break6=No 0000 00FF
+Break7=No 0000 00FF
+Break8=No 0000 00FF
+[Ctrl_Break]
+Mark=51 1
+ICE=0 6 2 CE4
+[HEAD]
+[DEPEND]
+~..\jd\jdheader.asm
+~..\jd\jdmain.asm
+~..\services\power.asm
+~$:INC_PDK\PMS150C.INC