splitted usb transfer instructions
This commit is contained in:
Peli de Halleux
Родитель
2cb467f22b
Коммит
dbaf406703
|
|
@ -1,7 +1,5 @@
|
|||
# Running programs on your micro:bit
|
||||
|
||||
How to compile, transfer, and run a program on your micro:bit.
|
||||
|
||||
While you're writing and testing your programs, you'll mostly be [running them
|
||||
in the simulator](/device/simulator), but once you've finished your program you
|
||||
can **compile** it and run it on your micro:bit.
|
||||
|
|
@ -12,173 +10,22 @@ The basic steps are:
|
|||
2. Click **Download** and download the `.hex` file
|
||||
3. Copy the `.hex` file from your computer onto the micro:bit drive
|
||||
|
||||
## Requirements
|
||||
|
||||
|
||||
You need the following things to transfer and run a script on your micro:bit:
|
||||
## Instructions
|
||||
|
||||
* A-Male to Micro USB cable to connect your computer to your micro:bit. This is
|
||||
the same cable that is commonly used to connect a smart phone to a computer.
|
||||
* A PC running Windows 7 or later, or a Mac running OS X 10.6 or later
|
||||
Pick the instructions for your operating system and browser:
|
||||
|
||||
## Step 1: Connect your micro:bit to your computer
|
||||
* [Windows - Microsoft Edge](/device/usb/windows-edge)
|
||||
* [Windows - Internet Explorer](/device/usb/windows-ie)
|
||||
* [Windows - Chrome](/device/usb/windows-chrome)
|
||||
* [Windows - Firefox](/device/usb/windows-firefox)
|
||||
* [Mac - Safari](/device/usb/mac-safari)
|
||||
* [Mac - Chrome](/device/usb/mac-chrome)
|
||||
* [Mac - Firefox](/device/usb/mac-firefox)
|
||||
|
||||
First, connect the micro:bit:
|
||||
### ~hint
|
||||
|
||||
1. Connect the small end of the USB cable to the micro USB port on your micro:bit.
|
||||
|
||||
2. Connect the other end of the USB cable to a USB port on your computer.
|
||||
|
||||
Your computer should recognise your micro:bit as a new drive. On computers
|
||||
running Windows, `MICROBIT` appears as a drive under Devices and drives. On a Mac
|
||||
it appears as a new drive under Devices.
|
||||
|
||||
**Windows**
|
||||
|
||||
|
||||
|
||||
**Mac**
|
||||
|
||||
|
||||
|
||||
## Step 2: Download your program
|
||||
|
||||
1. Open your project on [codethemicrobit.com](https://codethemicrobit.com)
|
||||
2. Click **Download**
|
||||
3. When prompted, choose to **save** the compiled file onto your computer. The
|
||||
prompt will be different depending on which browser you are using, or
|
||||
whether you are using a Windows computer or a Mac
|
||||
|
||||
### Windows
|
||||
|
||||
#### Chrome
|
||||
|
||||
Your `.hex` file appears as a download at the bottom of the browser. Click on
|
||||
the arrow next to the name of the file and then click **Show in folder**.
|
||||
|
||||
|
||||
|
||||
Drag and drop the `.hex` file from the download folder onto the `MICROBIT` drive.
|
||||
|
||||
#### Firefox
|
||||
|
||||
A window will appear asking whether you want to save or open the `.hex` file.
|
||||
Select **Save File** and then select **OK**.
|
||||
|
||||
|
||||
|
||||
The file will then appear in your downloads in the top right of your browser.
|
||||
Click the **folder icon** next to the filename to open it in Windows Explorer.
|
||||
|
||||
|
||||
|
||||
Drag and drop the `.hex` file from the download folder onto the `MICROBIT` drive.
|
||||
|
||||
#### Microsoft Edge
|
||||
|
||||
A message will appear at the bottom of the browser asking what you want to do
|
||||
with the file. Click **Save**:
|
||||
|
||||
|
||||
|
||||
Then click **Open folder** and drag and drop the file from your Downloads to
|
||||
your `MICROBIT` drive.
|
||||
|
||||
|
||||
|
||||
#### Internet Explorer
|
||||
|
||||
A message will appear at the bottom of the browser asking what you want to do
|
||||
with the file. Click **Save**:
|
||||
|
||||
|
||||
|
||||
Then click **Open folder** and drag and drop the file from your Downloads to
|
||||
your `MICROBIT` drive.
|
||||
|
||||
|
||||
|
||||
### Mac
|
||||
|
||||
#### Safari
|
||||
|
||||
When you select **Download** in Safari a file called `Unknown` will be
|
||||
downloaded into your Downloads folder. Open your Downloads folder and drag and
|
||||
drop the file onto your `MICROBIT` drive, under Devices:
|
||||
|
||||
|
||||
|
||||
#### Firefox
|
||||
|
||||
A dialogue box will appear, asking whether you would like to open or save your
|
||||
hex file. Select **Save file** and click **OK** and the file will then appear in
|
||||
your downloads in the top right of your browser. Right click on the file and
|
||||
click on **Show in Finder** and the file will appear in your downloads folder.
|
||||
Select the file and drag and drop it onto your `MICROBIT` drive.
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
#### Chrome
|
||||
|
||||
When you select **Download** in Chrome, the file will appear at the bottom of
|
||||
the browser. Click on the small arrow and select **Show in Finder**. This will
|
||||
show the file in your download folder. Drag and drop the file onto your
|
||||
`MICROBIT` drive.
|
||||
|
||||
|
||||
|
||||
## Step 3: Transfer the file to your micro:bit
|
||||
|
||||
* Once you've found the folder containing your `.hex` file, drag and drop it
|
||||
onto your `MICROBIT` drive
|
||||
* If you're using Windows, you can use **Send to** as described below
|
||||
* The LED on the back of your micro:bit flashes during the transfer (which
|
||||
should only take a few seconds).
|
||||
* Once transferred, the code will run automatically on your micro:bit. To rerun
|
||||
your program, press the reset button on the back of your micro:bit. The reset
|
||||
button automatically runs the newest file on the micro:bit.
|
||||
|
||||
**Send to**: If you're using Windows you use *Send to* in File Explorer:
|
||||
|
||||
- In File Explorer, right-click on the hex file (created in Step 2 above), choose **Send to**, and then **MICROBIT**.
|
||||
|
||||
|
||||
|
||||
By copying the script onto the `MICROBIT` drive, you have programmed it into the
|
||||
flash memory on the micro:bit, which means even after you unplug the micro:bit,
|
||||
your program will still run if the micro:bit is powered by battery.
|
||||
|
||||
If you want to save time, you can use the [micro:bit uploader](/uploader) to
|
||||
automatically deploy hex files to your micro:bit. It works on Windows and is
|
||||
compatible with any browser.
|
||||
|
||||
## Troubleshooting
|
||||
|
||||
You can’t drag and drop more than one hex file at once onto your micro:bit. If
|
||||
you try to drag and drop a second hex file onto your micro:bit before the first
|
||||
file has finished downloading, then the second file may fail in different ways.
|
||||
|
||||
When the first program has been written to the micro:bit, the drive will
|
||||
disengage. If you drag and drop a second file at this point it may not find the
|
||||
drive and the second write will fail.
|
||||
|
||||
The errors may look like this:
|
||||
|
||||
**Windows**
|
||||
|
||||
|
||||
|
||||
**Mac**
|
||||
|
||||
|
||||
|
||||
Or it may appear that there are two hex files on your micro:bit so the micro:bit
|
||||
won’t be able to run multiple files. To rectify this, unplug your micro:bit and
|
||||
plug it in again. Make sure that your micro:bit appears as `MICROBIT` and not
|
||||
`MAINTENANCE`.
|
||||
|
||||
### See also
|
||||
|
||||
[Run code in a browser](/device/simulator)
|
||||
Transfer not working? See some [troubleshooting tips](/device/usb/troubleshooting).
|
||||
|
||||
### ~
|
||||
|
|
|
|||
|
|
@ -0,0 +1,71 @@
|
|||
# Running programs on your micro:bit
|
||||
|
||||
How to compile, transfer, and run a program on your micro:bit for **Chrome for Mac**.
|
||||
|
||||
While you're writing and testing your programs, you'll mostly be [running them
|
||||
in the simulator](/device/simulator), but once you've finished your program you
|
||||
can **compile** it and run it on your micro:bit.
|
||||
|
||||
The basic steps are:
|
||||
|
||||
1. Connect your micro:bit to your computer via USB
|
||||
2. Click **Download** and download the `.hex` file
|
||||
3. Copy the `.hex` file from your computer onto the micro:bit drive
|
||||
|
||||
## Requirements
|
||||
|
||||
You need the following things to transfer and run a script on your micro:bit:
|
||||
|
||||
* A-Male to Micro USB cable to connect your computer to your micro:bit. This is
|
||||
the same cable that is commonly used to connect a smart phone to a computer.
|
||||
* A PC running Windows 7 or later, or a Mac running OS X 10.6 or later
|
||||
|
||||
## Step 1: Connect your micro:bit to your computer
|
||||
|
||||
First, connect the micro:bit:
|
||||
|
||||
1. Connect the small end of the USB cable to the micro USB port on your micro:bit.
|
||||
|
||||
2. Connect the other end of the USB cable to a USB port on your computer.
|
||||
|
||||
Your computer should recognise your micro:bit as a new drive. On computers
|
||||
running Windows, `MICROBIT` appears as a drive under Devices and drives. On a Mac
|
||||
it appears as a new drive under Devices.
|
||||
|
||||
|
||||
|
||||
## Step 2: Download your program
|
||||
|
||||
1. Open your project on [codethemicrobit.com](https://codethemicrobit.com)
|
||||
2. Click **Download**
|
||||
3. When prompted, choose to **save** the compiled file onto your computer. The
|
||||
prompt will be different depending on which browser you are using, or
|
||||
whether you are using a Windows computer or a Mac
|
||||
|
||||
When you select **Download** in Chrome, the file will appear at the bottom of
|
||||
the browser. Click on the small arrow and select **Show in Finder**. This will
|
||||
show the file in your download folder. Drag and drop the file onto your
|
||||
`MICROBIT` drive.
|
||||
|
||||
|
||||
|
||||
## Step 3: Transfer the file to your micro:bit
|
||||
|
||||
* Once you've found the folder containing your `.hex` file, drag and drop it
|
||||
onto your `MICROBIT` drive
|
||||
* The LED on the back of your micro:bit flashes during the transfer (which
|
||||
should only take a few seconds).
|
||||
* Once transferred, the code will run automatically on your micro:bit. To rerun
|
||||
your program, press the reset button on the back of your micro:bit. The reset
|
||||
button automatically runs the newest file on the micro:bit.
|
||||
|
||||
By copying the script onto the `MICROBIT` drive, you have programmed it into the
|
||||
flash memory on the micro:bit, which means even after you unplug the micro:bit,
|
||||
your program will still run if the micro:bit is powered by battery.
|
||||
|
||||
|
||||
### ~hint
|
||||
|
||||
Transfer not working? See some [troubleshooting tips](/device/usb/troubleshooting).
|
||||
|
||||
### ~
|
||||
|
|
@ -0,0 +1,73 @@
|
|||
# Running programs on your micro:bit
|
||||
|
||||
How to compile, transfer, and run a program on your micro:bit on **Firefox for Mac**.
|
||||
|
||||
While you're writing and testing your programs, you'll mostly be [running them
|
||||
in the simulator](/device/simulator), but once you've finished your program you
|
||||
can **compile** it and run it on your micro:bit.
|
||||
|
||||
The basic steps are:
|
||||
|
||||
1. Connect your micro:bit to your computer via USB
|
||||
2. Click **Download** and download the `.hex` file
|
||||
3. Copy the `.hex` file from your computer onto the micro:bit drive
|
||||
|
||||
## Requirements
|
||||
|
||||
You need the following things to transfer and run a script on your micro:bit:
|
||||
|
||||
* A-Male to Micro USB cable to connect your computer to your micro:bit. This is
|
||||
the same cable that is commonly used to connect a smart phone to a computer.
|
||||
* A PC running Windows 7 or later, or a Mac running OS X 10.6 or later
|
||||
|
||||
## Step 1: Connect your micro:bit to your computer
|
||||
|
||||
First, connect the micro:bit:
|
||||
|
||||
1. Connect the small end of the USB cable to the micro USB port on your micro:bit.
|
||||
|
||||
2. Connect the other end of the USB cable to a USB port on your computer.
|
||||
|
||||
Your computer should recognise your micro:bit as a new drive. On computers
|
||||
running Windows, `MICROBIT` appears as a drive under Devices and drives. On a Mac
|
||||
it appears as a new drive under Devices.
|
||||
|
||||
|
||||
|
||||
## Step 2: Download your program
|
||||
|
||||
1. Open your project on [codethemicrobit.com](https://codethemicrobit.com)
|
||||
2. Click **Download**
|
||||
3. When prompted, choose to **save** the compiled file onto your computer. The
|
||||
prompt will be different depending on which browser you are using, or
|
||||
whether you are using a Windows computer or a Mac
|
||||
|
||||
A dialogue box will appear, asking whether you would like to open or save your
|
||||
hex file. Select **Save file** and click **OK** and the file will then appear in
|
||||
your downloads in the top right of your browser. Right click on the file and
|
||||
click on **Show in Finder** and the file will appear in your downloads folder.
|
||||
Select the file and drag and drop it onto your `MICROBIT` drive.
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
## Step 3: Transfer the file to your micro:bit
|
||||
|
||||
* Once you've found the folder containing your `.hex` file, drag and drop it
|
||||
onto your `MICROBIT` drive
|
||||
* The LED on the back of your micro:bit flashes during the transfer (which
|
||||
should only take a few seconds).
|
||||
* Once transferred, the code will run automatically on your micro:bit. To rerun
|
||||
your program, press the reset button on the back of your micro:bit. The reset
|
||||
button automatically runs the newest file on the micro:bit.
|
||||
|
||||
By copying the script onto the `MICROBIT` drive, you have programmed it into the
|
||||
flash memory on the micro:bit, which means even after you unplug the micro:bit,
|
||||
your program will still run if the micro:bit is powered by battery.
|
||||
|
||||
### ~hint
|
||||
|
||||
Transfer not working? See some [troubleshooting tips](/device/usb/troubleshooting).
|
||||
|
||||
### ~
|
||||
|
|
@ -0,0 +1,70 @@
|
|||
# Running programs on your micro:bit
|
||||
|
||||
How to compile, transfer, and run a program on your micro:bit for **Safari on Mac**.
|
||||
|
||||
While you're writing and testing your programs, you'll mostly be [running them
|
||||
in the simulator](/device/simulator), but once you've finished your program you
|
||||
can **compile** it and run it on your micro:bit.
|
||||
|
||||
The basic steps are:
|
||||
|
||||
1. Connect your micro:bit to your computer via USB
|
||||
2. Click **Download** and download the `.hex` file
|
||||
3. Copy the `.hex` file from your computer onto the micro:bit drive
|
||||
|
||||
## Requirements
|
||||
|
||||
You need the following things to transfer and run a script on your micro:bit:
|
||||
|
||||
* A-Male to Micro USB cable to connect your computer to your micro:bit. This is
|
||||
the same cable that is commonly used to connect a smart phone to a computer.
|
||||
* A PC running Windows 7 or later, or a Mac running OS X 10.6 or later
|
||||
|
||||
## Step 1: Connect your micro:bit to your computer
|
||||
|
||||
First, connect the micro:bit:
|
||||
|
||||
1. Connect the small end of the USB cable to the micro USB port on your micro:bit.
|
||||
|
||||
2. Connect the other end of the USB cable to a USB port on your computer.
|
||||
|
||||
Your computer should recognise your micro:bit as a new drive. On computers
|
||||
running Windows, `MICROBIT` appears as a drive under Devices and drives. On a Mac
|
||||
it appears as a new drive under Devices.
|
||||
|
||||
|
||||
|
||||
## Step 2: Download your program
|
||||
|
||||
1. Open your project on [codethemicrobit.com](https://codethemicrobit.com)
|
||||
2. Click **Download**
|
||||
3. When prompted, choose to **save** the compiled file onto your computer. The
|
||||
prompt will be different depending on which browser you are using, or
|
||||
whether you are using a Windows computer or a Mac
|
||||
|
||||
When you select **Download** in Safari a file called `Unknown` will be
|
||||
downloaded into your Downloads folder. Open your Downloads folder and drag and
|
||||
drop the file onto your `MICROBIT` drive, under Devices:
|
||||
|
||||
|
||||
|
||||
## Step 3: Transfer the file to your micro:bit
|
||||
|
||||
* Once you've found the folder containing your `.hex` file, drag and drop it
|
||||
onto your `MICROBIT` drive
|
||||
* The LED on the back of your micro:bit flashes during the transfer (which
|
||||
should only take a few seconds).
|
||||
* Once transferred, the code will run automatically on your micro:bit. To rerun
|
||||
your program, press the reset button on the back of your micro:bit. The reset
|
||||
button automatically runs the newest file on the micro:bit.
|
||||
|
||||
By copying the script onto the `MICROBIT` drive, you have programmed it into the
|
||||
flash memory on the micro:bit, which means even after you unplug the micro:bit,
|
||||
your program will still run if the micro:bit is powered by battery.
|
||||
|
||||
|
||||
### ~hint
|
||||
|
||||
Transfer not working? See some [troubleshooting tips](/device/usb/troubleshooting).
|
||||
|
||||
### ~
|
||||
|
|
@ -0,0 +1,24 @@
|
|||
# Troubleshooting Transfer
|
||||
|
||||
You can’t drag and drop more than one hex file at once onto your micro:bit. If
|
||||
you try to drag and drop a second hex file onto your micro:bit before the first
|
||||
file has finished downloading, then the second file may fail in different ways.
|
||||
|
||||
When the first program has been written to the micro:bit, the drive will
|
||||
disengage. If you drag and drop a second file at this point it may not find the
|
||||
drive and the second write will fail.
|
||||
|
||||
The errors may look like this:
|
||||
|
||||
**Windows**
|
||||
|
||||
|
||||
|
||||
**Mac**
|
||||
|
||||
|
||||
|
||||
Or it may appear that there are two hex files on your micro:bit so the micro:bit
|
||||
won’t be able to run multiple files. To rectify this, unplug your micro:bit and
|
||||
plug it in again. Make sure that your micro:bit appears as `MICROBIT` and not
|
||||
`MAINTENANCE`.
|
||||
|
|
@ -0,0 +1,81 @@
|
|||
# Running programs on your micro:bit
|
||||
|
||||
How to compile, transfer, and run a program on your micro:bit on **Chrome for Windows**.
|
||||
|
||||
While you're writing and testing your programs, you'll mostly be [running them
|
||||
in the simulator](/device/simulator), but once you've finished your program you
|
||||
can **compile** it and run it on your micro:bit.
|
||||
|
||||
The basic steps are:
|
||||
|
||||
1. Connect your micro:bit to your computer via USB
|
||||
2. Click **Download** and download the `.hex` file
|
||||
3. Copy the `.hex` file from your computer onto the micro:bit drive
|
||||
|
||||
### ~hint
|
||||
|
||||
You can use the [micro:bit uploader](/uploader) to automatically deploy ``.hex`` files to your micro:bit!
|
||||
|
||||
|
||||
### ~
|
||||
|
||||
## Requirements
|
||||
|
||||
You need the following things to transfer and run a script on your micro:bit:
|
||||
|
||||
* A-Male to Micro USB cable to connect your computer to your micro:bit. This is
|
||||
the same cable that is commonly used to connect a smart phone to a computer.
|
||||
* A PC running Windows 7 or later, or a Mac running OS X 10.6 or later
|
||||
|
||||
## Step 1: Connect your micro:bit to your computer
|
||||
|
||||
First, connect the micro:bit:
|
||||
|
||||
1. Connect the small end of the USB cable to the micro USB port on your micro:bit.
|
||||
|
||||
2. Connect the other end of the USB cable to a USB port on your computer.
|
||||
|
||||
Your computer should recognise your micro:bit as a new drive. On computers
|
||||
running Windows, `MICROBIT` appears as a drive under Devices and drives. On a Mac
|
||||
it appears as a new drive under Devices.
|
||||
|
||||
|
||||
|
||||
## Step 2: Download your program
|
||||
|
||||
1. Open your project on [codethemicrobit.com](https://codethemicrobit.com)
|
||||
2. Click **Download**
|
||||
3. When prompted, choose to **save** the compiled file onto your computer. The
|
||||
prompt will be different depending on which browser you are using, or
|
||||
whether you are using a Windows computer or a Mac
|
||||
|
||||
Your `.hex` file appears as a download at the bottom of the browser. Click on
|
||||
the arrow next to the name of the file and then click **Show in folder**.
|
||||
|
||||
|
||||
|
||||
Drag and drop the `.hex` file from the download folder onto the `MICROBIT` drive.
|
||||
|
||||
## Step 3: Transfer the file to your micro:bit
|
||||
|
||||
* Once you've found the folder containing your `.hex` file, drag and drop it
|
||||
onto your `MICROBIT` drive
|
||||
* The LED on the back of your micro:bit flashes during the transfer (which
|
||||
should only take a few seconds).
|
||||
* Once transferred, the code will run automatically on your micro:bit. To rerun
|
||||
your program, press the reset button on the back of your micro:bit. The reset
|
||||
button automatically runs the newest file on the micro:bit.
|
||||
|
||||
In File Explorer, right-click on the hex file (created in Step 2 above), choose **Send to**, and then **MICROBIT**.
|
||||
|
||||
|
||||
|
||||
By copying the script onto the `MICROBIT` drive, you have programmed it into the
|
||||
flash memory on the micro:bit, which means even after you unplug the micro:bit,
|
||||
your program will still run if the micro:bit is powered by battery.
|
||||
|
||||
### ~hint
|
||||
|
||||
Transfer not working? See some [troubleshooting tips](/device/usb/troubleshooting).
|
||||
|
||||
### ~
|
||||
|
|
@ -0,0 +1,89 @@
|
|||
# Running programs on your micro:bit
|
||||
|
||||
How to compile, transfer, and run a program on your micro:bit on **Microsoft Edge**.
|
||||
|
||||
While you're writing and testing your programs, you'll mostly be [running them
|
||||
in the simulator](/device/simulator), but once you've finished your program you
|
||||
can **compile** it and run it on your micro:bit.
|
||||
|
||||
The basic steps are:
|
||||
|
||||
1. Connect your micro:bit to your computer via USB
|
||||
2. Click **Download** and download the `.hex` file
|
||||
3. Copy the `.hex` file from your computer onto the micro:bit drive
|
||||
|
||||
### ~hint
|
||||
|
||||
You can use the [micro:bit uploader](/uploader) to automatically deploy ``.hex`` files to your micro:bit!
|
||||
|
||||
|
||||
### ~
|
||||
|
||||
## Requirements
|
||||
|
||||
You need the following things to transfer and run a script on your micro:bit:
|
||||
|
||||
* A-Male to Micro USB cable to connect your computer to your micro:bit. This is
|
||||
the same cable that is commonly used to connect a smart phone to a computer.
|
||||
* A PC running Windows 7 or later, or a Mac running OS X 10.6 or later
|
||||
|
||||
## Step 1: Connect your micro:bit to your computer
|
||||
|
||||
First, connect the micro:bit:
|
||||
|
||||
1. Connect the small end of the USB cable to the micro USB port on your micro:bit.
|
||||
|
||||
2. Connect the other end of the USB cable to a USB port on your computer.
|
||||
|
||||
Your computer should recognise your micro:bit as a new drive. On computers
|
||||
running Windows, `MICROBIT` appears as a drive under Devices and drives. On a Mac
|
||||
it appears as a new drive under Devices.
|
||||
|
||||
|
||||
|
||||
## Step 2: Download your program
|
||||
|
||||
1. Open your project on [codethemicrobit.com](https://codethemicrobit.com)
|
||||
2. Click **Download**
|
||||
3. When prompted, choose to **save** the compiled file onto your computer. The
|
||||
prompt will be different depending on which browser you are using, or
|
||||
whether you are using a Windows computer or a Mac
|
||||
|
||||
A message will appear at the bottom of the browser asking what you want to do
|
||||
with the file. Click **Save**:
|
||||
|
||||
|
||||
|
||||
Then click **Open folder** and drag and drop the file from your Downloads to
|
||||
your `MICROBIT` drive.
|
||||
|
||||
|
||||
|
||||
## Step 3: Transfer the file to your micro:bit
|
||||
|
||||
* Once you've found the folder containing your `.hex` file, drag and drop it
|
||||
onto your `MICROBIT` drive
|
||||
* If you're using Windows, you can use **Send to** as described below
|
||||
* The LED on the back of your micro:bit flashes during the transfer (which
|
||||
should only take a few seconds).
|
||||
* Once transferred, the code will run automatically on your micro:bit. To rerun
|
||||
your program, press the reset button on the back of your micro:bit. The reset
|
||||
button automatically runs the newest file on the micro:bit.
|
||||
|
||||
In File Explorer, right-click on the hex file (created in Step 2 above), choose **Send to**, and then **MICROBIT**.
|
||||
|
||||
|
||||
|
||||
By copying the script onto the `MICROBIT` drive, you have programmed it into the
|
||||
flash memory on the micro:bit, which means even after you unplug the micro:bit,
|
||||
your program will still run if the micro:bit is powered by battery.
|
||||
|
||||
If you want to save time, you can use the [micro:bit uploader](/uploader) to
|
||||
automatically deploy hex files to your micro:bit. It works on Windows and is
|
||||
compatible with any browser.
|
||||
|
||||
### ~hint
|
||||
|
||||
Transfer not working? See some [troubleshooting tips](/device/usb/troubleshooting).
|
||||
|
||||
### ~
|
||||
|
|
@ -0,0 +1,86 @@
|
|||
# Running programs on your micro:bit
|
||||
|
||||
How to compile, transfer, and run a program on your micro:bit on **Firefox for Windows**.
|
||||
|
||||
While you're writing and testing your programs, you'll mostly be [running them
|
||||
in the simulator](/device/simulator), but once you've finished your program you
|
||||
can **compile** it and run it on your micro:bit.
|
||||
|
||||
The basic steps are:
|
||||
|
||||
1. Connect your micro:bit to your computer via USB
|
||||
2. Click **Download** and download the `.hex` file
|
||||
3. Copy the `.hex` file from your computer onto the micro:bit drive
|
||||
|
||||
### ~hint
|
||||
|
||||
You can use the [micro:bit uploader](/uploader) to automatically deploy ``.hex`` files to your micro:bit!
|
||||
|
||||
|
||||
### ~
|
||||
|
||||
## Requirements
|
||||
|
||||
You need the following things to transfer and run a script on your micro:bit:
|
||||
|
||||
* A-Male to Micro USB cable to connect your computer to your micro:bit. This is
|
||||
the same cable that is commonly used to connect a smart phone to a computer.
|
||||
* A PC running Windows 7 or later, or a Mac running OS X 10.6 or later
|
||||
|
||||
## Step 1: Connect your micro:bit to your computer
|
||||
|
||||
First, connect the micro:bit:
|
||||
|
||||
1. Connect the small end of the USB cable to the micro USB port on your micro:bit.
|
||||
|
||||
2. Connect the other end of the USB cable to a USB port on your computer.
|
||||
|
||||
Your computer should recognise your micro:bit as a new drive. On computers
|
||||
running Windows, `MICROBIT` appears as a drive under Devices and drives. On a Mac
|
||||
it appears as a new drive under Devices.
|
||||
|
||||
|
||||
|
||||
## Step 2: Download your program
|
||||
|
||||
1. Open your project on [codethemicrobit.com](https://codethemicrobit.com)
|
||||
2. Click **Download**
|
||||
3. When prompted, choose to **save** the compiled file onto your computer. The
|
||||
prompt will be different depending on which browser you are using, or
|
||||
whether you are using a Windows computer or a Mac
|
||||
|
||||
A window will appear asking whether you want to save or open the `.hex` file.
|
||||
Select **Save File** and then select **OK**.
|
||||
|
||||
|
||||
|
||||
The file will then appear in your downloads in the top right of your browser.
|
||||
Click the **folder icon** next to the filename to open it in Windows Explorer.
|
||||
|
||||
|
||||
|
||||
Drag and drop the `.hex` file from the download folder onto the `MICROBIT` drive.
|
||||
## Step 3: Transfer the file to your micro:bit
|
||||
|
||||
* Once you've found the folder containing your `.hex` file, drag and drop it
|
||||
onto your `MICROBIT` drive
|
||||
* If you're using Windows, you can use **Send to** as described below
|
||||
* The LED on the back of your micro:bit flashes during the transfer (which
|
||||
should only take a few seconds).
|
||||
* Once transferred, the code will run automatically on your micro:bit. To rerun
|
||||
your program, press the reset button on the back of your micro:bit. The reset
|
||||
button automatically runs the newest file on the micro:bit.
|
||||
|
||||
In File Explorer, right-click on the hex file (created in Step 2 above), choose **Send to**, and then **MICROBIT**.
|
||||
|
||||
|
||||
|
||||
By copying the script onto the `MICROBIT` drive, you have programmed it into the
|
||||
flash memory on the micro:bit, which means even after you unplug the micro:bit,
|
||||
your program will still run if the micro:bit is powered by battery.
|
||||
|
||||
### ~hint
|
||||
|
||||
Transfer not working? See some [troubleshooting tips](/device/usb/troubleshooting).
|
||||
|
||||
### ~
|
||||
|
|
@ -0,0 +1,88 @@
|
|||
# Running programs on your micro:bit
|
||||
|
||||
How to compile, transfer, and run a program on your micro:bit on **Internet Explorer**.
|
||||
|
||||
While you're writing and testing your programs, you'll mostly be [running them
|
||||
in the simulator](/device/simulator), but once you've finished your program you
|
||||
can **compile** it and run it on your micro:bit.
|
||||
|
||||
The basic steps are:
|
||||
|
||||
1. Connect your micro:bit to your computer via USB
|
||||
2. Click **Download** and download the `.hex` file
|
||||
3. Copy the `.hex` file from your computer onto the micro:bit drive
|
||||
|
||||
### ~hint
|
||||
|
||||
You can use the [micro:bit uploader](/uploader) to automatically deploy ``.hex`` files to your micro:bit!
|
||||
|
||||
|
||||
### ~
|
||||
|
||||
## Requirements
|
||||
|
||||
You need the following things to transfer and run a script on your micro:bit:
|
||||
|
||||
* A-Male to Micro USB cable to connect your computer to your micro:bit. This is
|
||||
the same cable that is commonly used to connect a smart phone to a computer.
|
||||
* A PC running Windows 7 or later, or a Mac running OS X 10.6 or later
|
||||
|
||||
## Step 1: Connect your micro:bit to your computer
|
||||
|
||||
First, connect the micro:bit:
|
||||
|
||||
1. Connect the small end of the USB cable to the micro USB port on your micro:bit.
|
||||
|
||||
2. Connect the other end of the USB cable to a USB port on your computer.
|
||||
|
||||
Your computer should recognise your micro:bit as a new drive. On computers
|
||||
running Windows, `MICROBIT` appears as a drive under Devices and drives. On a Mac
|
||||
it appears as a new drive under Devices.
|
||||
|
||||
|
||||
|
||||
## Step 2: Download your program
|
||||
|
||||
1. Open your project on [codethemicrobit.com](https://codethemicrobit.com)
|
||||
2. Click **Download**
|
||||
3. When prompted, choose to **save** the compiled file onto your computer. The
|
||||
prompt will be different depending on which browser you are using, or
|
||||
whether you are using a Windows computer or a Mac
|
||||
|
||||
A message will appear at the bottom of the browser asking what you want to do
|
||||
with the file. Click **Save**:
|
||||
|
||||
|
||||
|
||||
Then click **Open folder** and drag and drop the file from your Downloads to
|
||||
your `MICROBIT` drive.
|
||||
|
||||
|
||||
|
||||
## Step 3: Transfer the file to your micro:bit
|
||||
|
||||
* Once you've found the folder containing your `.hex` file, drag and drop it
|
||||
onto your `MICROBIT` drive
|
||||
* If you're using Windows, you can use **Send to** as described below
|
||||
* The LED on the back of your micro:bit flashes during the transfer (which
|
||||
should only take a few seconds).
|
||||
* Once transferred, the code will run automatically on your micro:bit. To rerun
|
||||
your program, press the reset button on the back of your micro:bit. The reset
|
||||
button automatically runs the newest file on the micro:bit.
|
||||
|
||||
**Send to**: If you're using Windows you use *Send to* in File Explorer:
|
||||
|
||||
In File Explorer, right-click on the hex file (created in Step 2 above), choose **Send to**, and then **MICROBIT**.
|
||||
|
||||
|
||||
|
||||
By copying the script onto the `MICROBIT` drive, you have programmed it into the
|
||||
flash memory on the micro:bit, which means even after you unplug the micro:bit,
|
||||
your program will still run if the micro:bit is powered by battery.
|
||||
|
||||
|
||||
### ~hint
|
||||
|
||||
Transfer not working? See some [troubleshooting tips](/device/usb/troubleshooting).
|
||||
|
||||
### ~
|
||||
Двоичный файл не отображается.
|
После Ширина: | Высота: | Размер: 41 KiB |
Загрузка…
Ссылка в новой задаче