Localization - Translated Strings

i18n/chs/src/make.i18n.json

@@ -46,13 +46,16 @@
 	"no.post.configure.script.provided.logger": "设置中未设置配置后脚本。请确保使用 makefile.postConfigureScript 定义配置后脚本路径。",
 	"could.not.find.error": "找不到配置后脚本。",
 	"could.not.find.post.configure.on.disk": "在磁盘上找不到给定的配置后脚本“{0}”。",
-	"make.postconfigure.title": "正在进行后期配置: ${0}",
+	"make.postconfigure.title": "Post-configuring: {0}",
 	"make.postconfigure.cancelling.title": "正在取消后期配置",
 	"pre.configuring.script": "正在预配置...\n脚本:“{0}”",
 	"preconfigure.succeeded": "预配置成功。",
 	"preconfigure.succeeded.with.some.error": "预配置脚本返回了成功代码，但在预配置过程中的某个环节报告了错误。在 Makefile 工具频道中仔细检查预配置输出。",
 	"preconfigure.script.failed": "预配置脚本失败。此项目可能无法成功配置。",
 	"post.configure.script": "正在进行后期配置...\n脚本:“{0}”",
+	"postconfigure.succeeded": "The post-configure succeeded.",
+	"postconfigure.succeeded.with.some.error": "The post-configure script returned success code but somewhere during the postconfigure process there were errors reported. Double check the postconfigure output in the Makefile Tools channel.",
+	"postconfigure.script.failed": "The post-configure script failed. This project may not configure successfully.",
 	"cannot.configure.project.untrusted": "无法在不受信任的工作区中配置项目。",
 	"attempting.configure.after.failed.preconfigure": "正在尝试在预配置失败后运行配置。",
 	"make.configuring.title": "正在配置",

i18n/cht/src/make.i18n.json

@@ -46,13 +46,16 @@
 	"no.post.configure.script.provided.logger": "設定中未設置任何後續設定指令碼。請確定使用 makefile.postConfigureScript 定義後續組態指令碼路徑。",
 	"could.not.find.error": "找不到後續設定指令碼。",
 	"could.not.find.post.configure.on.disk": "在磁碟上找不到指定的後續設定指令碼「{0}」。",
-	"make.postconfigure.title": "後續設定: ${0}",
+	"make.postconfigure.title": "Post-configuring: {0}",
 	"make.postconfigure.cancelling.title": "正在取消後續設定",
 	"pre.configuring.script": "正在預先設定...\n指令碼：「{0}」",
 	"preconfigure.succeeded": "已成功預先設定。",
 	"preconfigure.succeeded.with.some.error": "預先設定指令碼傳回了成功的程式碼，不過預先設定流程中有某處回報發生錯誤。請再次檢查 Makefile 工具通道中的預先設定輸出。",
 	"preconfigure.script.failed": "無法預先設定指令碼。無法成功設定此專案。",
 	"post.configure.script": "正在後續設定...\n指令碼：「{0}」",
+	"postconfigure.succeeded": "The post-configure succeeded.",
+	"postconfigure.succeeded.with.some.error": "The post-configure script returned success code but somewhere during the postconfigure process there were errors reported. Double check the postconfigure output in the Makefile Tools channel.",
+	"postconfigure.script.failed": "The post-configure script failed. This project may not configure successfully.",
 	"cannot.configure.project.untrusted": "無法在不受信任的工作區中設定專案。",
 	"attempting.configure.after.failed.preconfigure": "嘗試在失敗的預先設定之後執行設定。",
 	"make.configuring.title": "正在設定",

i18n/csy/src/make.i18n.json

@@ -46,13 +46,16 @@
 	"no.post.configure.script.provided.logger": "V nastavení není nakonfigurovaný žádný skript následné konfigurace. Ujistěte se, že v makefile.preConfigureScript je definovaná cesta ke skriptu následné konfigurace.",
 	"could.not.find.error": "Nepovedlo se najít skript po konfiguraci.",
 	"could.not.find.post.configure.on.disk": "Zadaný skript po konfiguraci {0} nebyl nalezen na disku.",
-	"make.postconfigure.title": "Následná konfigurace: ${0}",
+	"make.postconfigure.title": "Post-configuring: {0}",
 	"make.postconfigure.cancelling.title": "Ruší se následná konfigurace",
 	"pre.configuring.script": "Probíhá předběžná konfigurace...\nSkript: {0}",
 	"preconfigure.succeeded": "Předběžná konfigurace byla úspěšná.",
 	"preconfigure.succeeded.with.some.error": "Skript předběžné konfigurace se vrátil s úspěšným návratovým kódem, ale během procesu předběžné konfigurace byly nahlášeny chyby. Důkladně zkontrolujte výstup předběžné konfigurace v kanálu Makefile Tools.",
 	"preconfigure.script.failed": "Skript předběžné konfigurace selhal. Tento projekt se možná nenakonfiguruje úspěšně.",
 	"post.configure.script": "Po konfiguraci... \nSkript: {0}",
+	"postconfigure.succeeded": "The post-configure succeeded.",
+	"postconfigure.succeeded.with.some.error": "The post-configure script returned success code but somewhere during the postconfigure process there were errors reported. Double check the postconfigure output in the Makefile Tools channel.",
+	"postconfigure.script.failed": "The post-configure script failed. This project may not configure successfully.",
 	"cannot.configure.project.untrusted": "Projekt se nedá nakonfigurovat v nedůvěryhodném pracovním prostoru.",
 	"attempting.configure.after.failed.preconfigure": "Probíhá pokus o spuštění konfigurace po neúspěšné předkonfiguraci.",
 	"make.configuring.title": "Probíhá konfigurace",

i18n/deu/src/make.i18n.json

@@ -46,13 +46,16 @@
 	"no.post.configure.script.provided.logger": "In den Einstellungen ist kein nachkonfiguriertes Skript festgelegt. Stellen Sie sicher, dass ein Skriptpfad nach der Konfiguration mit \"makefile.postConfigureScript\" definiert ist.",
 	"could.not.find.error": "Das Nachkonfigurationsskript wurde nicht gefunden.",
 	"could.not.find.post.configure.on.disk": "Das angegebene Nachkonfigurationsskript „{0}“ wurde auf dem Datenträger nicht gefunden.",
-	"make.postconfigure.title": "Nachkonfiguration von ${0}",
+	"make.postconfigure.title": "Post-configuring: {0}",
 	"make.postconfigure.cancelling.title": "Die Nachkonfiguration wird abgebrochen",
 	"pre.configuring.script": "Vorkonfiguration wird ausgeführt...\nSkript: „{0}“",
 	"preconfigure.succeeded": "Die Vorkonfiguration war erfolgreich.",
 	"preconfigure.succeeded.with.some.error": "Das vorkonfigurierte Skript hat Erfolgscode zurückgegeben, aber während des Vorkonfigurationsprozesses wurden Fehler gemeldet. Überprüfen Sie die Vorkonfigurationsausgabe im Kanal \"Makefile-Tools\".",
 	"preconfigure.script.failed": "Fehler beim Vorkonfigurierungsskript. Dieses Projekt wurde möglicherweise nicht erfolgreich konfiguriert.",
 	"post.configure.script": "Nachkonfiguration wird ausgeführt... \nSkript: „{0}“",
+	"postconfigure.succeeded": "The post-configure succeeded.",
+	"postconfigure.succeeded.with.some.error": "The post-configure script returned success code but somewhere during the postconfigure process there were errors reported. Double check the postconfigure output in the Makefile Tools channel.",
+	"postconfigure.script.failed": "The post-configure script failed. This project may not configure successfully.",
 	"cannot.configure.project.untrusted": "Ein Projekt kann nicht in einem nicht vertrauenswürdigen Arbeitsbereich konfiguriert werden.",
 	"attempting.configure.after.failed.preconfigure": "Es wird versucht, die Konfiguration nach einer fehlerhaften Vorkonfiguration auszuführen.",
 	"make.configuring.title": "Wird konfiguriert",

i18n/esn/src/make.i18n.json

@@ -46,13 +46,16 @@
 	"no.post.configure.script.provided.logger": "No se ha establecido ningún script de configuración posterior en la configuración. Asegúrese de que se define una ruta de acceso al script de configuración posterior con makefile.postConfigureScript.",
 	"could.not.find.error": "No se encontró el script de postconfiguración.",
 	"could.not.find.post.configure.on.disk": "No se encontró el script postconfigurado especificado \"{0}\" en el disco.",
-	"make.postconfigure.title": "Postconfigurando: ${0}",
+	"make.postconfigure.title": "Post-configuring: {0}",
 	"make.postconfigure.cancelling.title": "Cancelando la configuración posterior",
 	"pre.configuring.script": "Preconfigurando...\nScript: \"{0}\"",
 	"preconfigure.succeeded": "La configuración previa se realizó correctamente.",
 	"preconfigure.succeeded.with.some.error": "El script de configuración previa devolvió un código de resultado correcto, pero en algún momento del proceso de configuración previa se notificaron errores. Vuelva a comprobar la salida de la configuración previa en el canal de Herramientas de Makefile.",
 	"preconfigure.script.failed": "Error en el script de configuración previa. Es posible que este proyecto no se configure correctamente.",
 	"post.configure.script": "Postconfigurando... \nScript: \"{0}\"",
+	"postconfigure.succeeded": "The post-configure succeeded.",
+	"postconfigure.succeeded.with.some.error": "The post-configure script returned success code but somewhere during the postconfigure process there were errors reported. Double check the postconfigure output in the Makefile Tools channel.",
+	"postconfigure.script.failed": "The post-configure script failed. This project may not configure successfully.",
 	"cannot.configure.project.untrusted": "No se puede configurar un proyecto en un área de trabajo que no sea de confianza.",
 	"attempting.configure.after.failed.preconfigure": "Se está intentando ejecutar la configuración después de una configuración previa con error.",
 	"make.configuring.title": "Configurando",

i18n/fra/src/make.i18n.json

@@ -46,13 +46,16 @@
 	"no.post.configure.script.provided.logger": "Aucun script de pré-configuration n’est défini dans les paramètres. Vérifiez qu’un chemin de script de pré-configuration est défini avec makefile.preConfigureScript.",
 	"could.not.find.error": "Impossible de trouver le script de post-configuration.",
 	"could.not.find.post.configure.on.disk": "Impossible de trouver le script de post-configuration \"{0}\" sur le disque.",
-	"make.postconfigure.title": "Postconfiguration : ${0}",
+	"make.postconfigure.title": "Post-configuring: {0}",
 	"make.postconfigure.cancelling.title": "Annulation de la postconfiguration",
 	"pre.configuring.script": "Pré-configuration...\nScript : «{0}»",
 	"preconfigure.succeeded": "La pré-configuration a réussi.",
 	"preconfigure.succeeded.with.some.error": "Le script de pré-configuration a retourné un code de réussite, mais des erreurs ont été signalées au cours du processus de pré-configuration. Revérifiez la sortie de pré-configuration dans le canal Makefile Tools.",
 	"preconfigure.script.failed": "Désolé... Nous n’avons pas pu préconfigurer le script. Ce projet n’est peut-être pas configuré correctement.",
 	"post.configure.script": "Post-configuration... \nScript : «{0}»",
+	"postconfigure.succeeded": "The post-configure succeeded.",
+	"postconfigure.succeeded.with.some.error": "The post-configure script returned success code but somewhere during the postconfigure process there were errors reported. Double check the postconfigure output in the Makefile Tools channel.",
+	"postconfigure.script.failed": "The post-configure script failed. This project may not configure successfully.",
 	"cannot.configure.project.untrusted": "Désolé, nous ne pouvons pas configurer un projet dans un espace de travail non approuvé.",
 	"attempting.configure.after.failed.preconfigure": "Tentative d’exécution de la configuration après l’échec d’une préconfiguration.",
 	"make.configuring.title": "Configuration",

i18n/ita/src/make.i18n.json

@@ -46,13 +46,16 @@
 	"no.post.configure.script.provided.logger": "Nelle impostazioni non è impostato alcuno script di postconfigurazione. Assicurarsi che un percorso di script di postconfigurazione sia definito con makefile.postConfigureScript.",
 	"could.not.find.error": "Non è stato possibile trovare lo script di post-configurazione.",
 	"could.not.find.post.configure.on.disk": "Non è stato possibile trovare lo script post-configurato specificato \"{0}\" su disco.",
-	"make.postconfigure.title": "Post-configurazione: ${0}",
+	"make.postconfigure.title": "Post-configuring: {0}",
 	"make.postconfigure.cancelling.title": "Annullamento della post-configurazione",
 	"pre.configuring.script": "Preconfigurazione in corso...\nScript: \"{0}\"",
 	"preconfigure.succeeded": "La preconfigurazione è riuscita.",
 	"preconfigure.succeeded.with.some.error": "Lo script di preconfigurazione ha restituito codice di operazione riuscita ma durante il processo di preconfigurazione sono stati segnalati errori. Controllare l’output di preconfigurazione nel canale Makefile Tools.",
 	"preconfigure.script.failed": "Lo script di preconfigurazione non è riuscito. È possibile che la configurazione del progetto non avvenga in maniera corretta.",
 	"post.configure.script": "Post-configurazione in corso... \nScript: \"{0}\"",
+	"postconfigure.succeeded": "The post-configure succeeded.",
+	"postconfigure.succeeded.with.some.error": "The post-configure script returned success code but somewhere during the postconfigure process there were errors reported. Double check the postconfigure output in the Makefile Tools channel.",
+	"postconfigure.script.failed": "The post-configure script failed. This project may not configure successfully.",
 	"cannot.configure.project.untrusted": "Non è possibile configurare un progetto in un'area di lavoro non attendibile.",
 	"attempting.configure.after.failed.preconfigure": "Tentativo di eseguire la configurazione dopo una preconfigurazione non riuscita.",
 	"make.configuring.title": "Configurazione in corso",

i18n/jpn/src/make.i18n.json

@@ -46,13 +46,16 @@
 	"no.post.configure.script.provided.logger": "設定に構成後スクリプトが設定されていません。makefile.preConfigureScript で構成後スクリプト パスが定義されていることを確認してください。",
 	"could.not.find.error": "事後構成スクリプトが見つかりませんでした。",
 	"could.not.find.post.configure.on.disk": "指定された事後構成スクリプト \"{0}\" がディスクに見つかりませんでした。",
-	"make.postconfigure.title": "構成後: ${0}",
+	"make.postconfigure.title": "Post-configuring: {0}",
 	"make.postconfigure.cancelling.title": "構成後の取り消し",
 	"pre.configuring.script": "事前構成中...\nスクリプト: \"{0}\"",
 	"preconfigure.succeeded": "事前構成に成功しました。",
 	"preconfigure.succeeded.with.some.error": "事前構成スクリプトは成功コードを返しましたが、事前構成プロセス中のどこかでエラーが報告されました。メイクファイル ツール チャネルで事前構成出力を再確認します。",
 	"preconfigure.script.failed": "事前構成スクリプトが失敗しました。このプロジェクトは正常に構成されない可能性があります。",
 	"post.configure.script": "事後構成中...\nスクリプト: \"{0}\"",
+	"postconfigure.succeeded": "The post-configure succeeded.",
+	"postconfigure.succeeded.with.some.error": "The post-configure script returned success code but somewhere during the postconfigure process there were errors reported. Double check the postconfigure output in the Makefile Tools channel.",
+	"postconfigure.script.failed": "The post-configure script failed. This project may not configure successfully.",
 	"cannot.configure.project.untrusted": "信頼されていないワークスペースではプロジェクトを構成できません。",
 	"attempting.configure.after.failed.preconfigure": "失敗した事前構成の後に、構成を実行しようとしています。",
 	"make.configuring.title": "構成",

i18n/kor/src/make.i18n.json

@@ -46,13 +46,16 @@
 	"no.post.configure.script.provided.logger": "설정에 사후 구성 스크립트가 설정되지 않았습니다. 사후 구성 스크립트 경로가 makefile.postConfigureScript로 정의되어 있는지 확인합니다.",
 	"could.not.find.error": "사후 구성 스크립트를 찾을 수 없습니다.",
 	"could.not.find.post.configure.on.disk": "디스크에서 지정된 사후 구성 스크립트 \"{0}\"을(를) 찾을 수 없습니다.",
-	"make.postconfigure.title": "사전 구성 중: ${0}",
+	"make.postconfigure.title": "Post-configuring: {0}",
 	"make.postconfigure.cancelling.title": "사후 구성 취소하는 중",
 	"pre.configuring.script": "사전 구성 중...\n스크립트: \"{0}\"",
 	"preconfigure.succeeded": "사전 구성에 성공했습니다.",
 	"preconfigure.succeeded.with.some.error": "사전 구성 스크립트가 성공 코드를 반환했지만 사전 구성 프로세스 중에 오류가 보고되었습니다. 메이크파일 도구 채널에서 사전 구성 출력을 다시 확인하세요.",
 	"preconfigure.script.failed": "사전 구성 스크립트가 실패했습니다. 이 프로젝트를 구성하지 못할 수 있습니다.",
 	"post.configure.script": "구성 후... \n스크립트: \"{0}\"",
+	"postconfigure.succeeded": "The post-configure succeeded.",
+	"postconfigure.succeeded.with.some.error": "The post-configure script returned success code but somewhere during the postconfigure process there were errors reported. Double check the postconfigure output in the Makefile Tools channel.",
+	"postconfigure.script.failed": "The post-configure script failed. This project may not configure successfully.",
 	"cannot.configure.project.untrusted": "신뢰할 수 없는 작업 영역에서 프로젝트를 구성할 수 없습니다.",
 	"attempting.configure.after.failed.preconfigure": "사전 구성에 실패한 후 구성을 실행하려고 합니다.",
 	"make.configuring.title": "구성하는 중",

i18n/plk/src/make.i18n.json

@@ -46,13 +46,16 @@
 	"no.post.configure.script.provided.logger": "W ustawieniach nie ustawiono żadnego wstępnie skonfigurowanego skryptu. Upewnij się, że ścieżka skryptu konfiguracji następczej jest zdefiniowana za pomocą makefile.preConfigureScript.",
 	"could.not.find.error": "Nie można odnaleźć skryptu po skonfigurowania.",
 	"could.not.find.post.configure.on.disk": "Nie można odnaleźć danego skryptu po skonfigurowaniu „{0}” na dysku.",
-	"make.postconfigure.title": "Po skonfigurowaniu: ${0}",
+	"make.postconfigure.title": "Post-configuring: {0}",
 	"make.postconfigure.cancelling.title": "Anulowanie po skonfigurowaniu",
 	"pre.configuring.script": "Wstępne konfigurowanie...\nSkrypt: „{0}”",
 	"preconfigure.succeeded": "Konfiguracja wstępna powiodła się.",
 	"preconfigure.succeeded.with.some.error": "Skrypt konfiguracji wstępnej zwrócił kod powodzenia, ale w trakcie procesu wstępnej konfiguracji wystąpiły błędy. Sprawdź dokładnie dane wyjściowe konfiguracji wstępnej w kanale Makefile Tools.",
 	"preconfigure.script.failed": "Skrypt wstępnej konfiguracji nie powiódł się. Ten projekt może nie zostać pomyślnie skonfigurowany.",
 	"post.configure.script": "Po skonfigurowaniu... \nSkrypt: „{0}”",
+	"postconfigure.succeeded": "The post-configure succeeded.",
+	"postconfigure.succeeded.with.some.error": "The post-configure script returned success code but somewhere during the postconfigure process there were errors reported. Double check the postconfigure output in the Makefile Tools channel.",
+	"postconfigure.script.failed": "The post-configure script failed. This project may not configure successfully.",
 	"cannot.configure.project.untrusted": "Nie można skonfigurować projektu w niezaufanym obszarze roboczym.",
 	"attempting.configure.after.failed.preconfigure": "Próba uruchomienia konfiguracji po nieudanej wstępnej konfiguracji.",
 	"make.configuring.title": "Konfigurowanie",

i18n/ptb/src/make.i18n.json

@@ -46,13 +46,16 @@
 	"no.post.configure.script.provided.logger": "Nenhum script pós-configuração foi definido nas configurações. Certifique-se de que o caminho do script pós-configuração esteja definido com makefile.postConfigureScript.",
 	"could.not.find.error": "Não foi possível encontrar o script pós-configuração.",
 	"could.not.find.post.configure.on.disk": "Não foi possível encontrar o script de pós-configuração \"{0}\" fornecido no disco.",
-	"make.postconfigure.title": "Pós-configuração: ${0}",
+	"make.postconfigure.title": "Post-configuring: {0}",
 	"make.postconfigure.cancelling.title": "Cancelando pós-configuração",
 	"pre.configuring.script": "Pré-configuração...\nScript: \"{0}\"",
 	"preconfigure.succeeded": "A pré-configuração foi bem-sucedida.",
 	"preconfigure.succeeded.with.some.error": "O script de pré-configuração retornou o código de sucesso, mas em algum lugar durante o processo de pré-configuração foram relatados erros. Verifique novamente a saída de pré-configuração no canal Ferramentas Makefile.",
 	"preconfigure.script.failed": "O script de pré-configuração falhou. Este projeto pode não ser configurado com êxito.",
 	"post.configure.script": "Pós-configuração... \nScript: \"{0}\"",
+	"postconfigure.succeeded": "The post-configure succeeded.",
+	"postconfigure.succeeded.with.some.error": "The post-configure script returned success code but somewhere during the postconfigure process there were errors reported. Double check the postconfigure output in the Makefile Tools channel.",
+	"postconfigure.script.failed": "The post-configure script failed. This project may not configure successfully.",
 	"cannot.configure.project.untrusted": "Não é possível configurar um projeto em um workspace não confiável.",
 	"attempting.configure.after.failed.preconfigure": "Tentando executar a configuração após uma pré-configuração com falha.",
 	"make.configuring.title": "Configurando",

i18n/rus/src/make.i18n.json

@@ -46,13 +46,16 @@
 	"no.post.configure.script.provided.logger": "В параметрах не задан скрипт последующей настройки. Определите путь к скрипту последующей настройки с помощью makefile.postConfigureScript.",
 	"could.not.find.error": "Не удалось найти сценарий, выполняемый после настройки.",
 	"could.not.find.post.configure.on.disk": "Не удалось найти заданный сценарий, выполняемый после настройки \"{0}\" на диске.",
-	"make.postconfigure.title": "Последующая настройка: ${0}",
+	"make.postconfigure.title": "Post-configuring: {0}",
 	"make.postconfigure.cancelling.title": "Отмена после настройки",
 	"pre.configuring.script": "Предварительная настройка...\nСценарий: \"{0}\"",
 	"preconfigure.succeeded": "Предварительная настройка выполнена успешно.",
 	"preconfigure.succeeded.with.some.error": "Скрипт предварительной настройки вернул код успешного выполнения, но в ходе процесса предварительной настройки возникли ошибки. Проверьте выходные данные предварительной настройки в канале средств Makefile.",
 	"preconfigure.script.failed": "Сбой скрипта предварительной настройки. Возможно, этот проект не будет настроен успешно.",
 	"post.configure.script": "После настройки... \nСценарий: \"{0}\"",
+	"postconfigure.succeeded": "The post-configure succeeded.",
+	"postconfigure.succeeded.with.some.error": "The post-configure script returned success code but somewhere during the postconfigure process there were errors reported. Double check the postconfigure output in the Makefile Tools channel.",
+	"postconfigure.script.failed": "The post-configure script failed. This project may not configure successfully.",
 	"cannot.configure.project.untrusted": "Не удается настроить проект в ненадежной рабочей области.",
 	"attempting.configure.after.failed.preconfigure": "Выполняется попытка выполнить настройку после сбоя предварительной настройки.",
 	"make.configuring.title": "Настройка",

i18n/trk/src/make.i18n.json

@@ -46,13 +46,16 @@
 	"no.post.configure.script.provided.logger": "Ayarlarda yapılandırma sonrası betiği ayarlanmadı. Yapılandırma sonrası betiği yolunun makefile.postConfigureScript ile tanımlandığından emin olun.",
 	"could.not.find.error": "Yapılandırma sonrası betiği bulunamadı.",
 	"could.not.find.post.configure.on.disk": "Belirtilen yapılandırma sonrası betiği \"{0}\" diskinde bulunamadı.",
-	"make.postconfigure.title": "Yapılandırma sonrası: ${0}",
+	"make.postconfigure.title": "Post-configuring: {0}",
 	"make.postconfigure.cancelling.title": "Yapılandırma sonrası iptal ediliyor",
 	"pre.configuring.script": "Önceden yapılandırılıyor...\nBetik: \"{0}\"",
 	"preconfigure.succeeded": "Önceden yapılandırma başarılı oldu.",
 	"preconfigure.succeeded.with.some.error": "Önceden yapılandırma betiği başarı kodu döndürdü, ancak önceden yapılandırma işlemi sırasında hatalar bildirildi. Derleme Görevleri Dosyası Araçları kanalında önceden yapılandırma çıkışını yeniden denetleyin.",
 	"preconfigure.script.failed": "Önceden yapılandırma betiği başarısız oldu. Bu proje başarıyla yapılandırılmayabilir.",
 	"post.configure.script": "Yapılandırma sonrası işlem uygulanıyor... \nBetik: \"{0}\"",
+	"postconfigure.succeeded": "The post-configure succeeded.",
+	"postconfigure.succeeded.with.some.error": "The post-configure script returned success code but somewhere during the postconfigure process there were errors reported. Double check the postconfigure output in the Makefile Tools channel.",
+	"postconfigure.script.failed": "The post-configure script failed. This project may not configure successfully.",
 	"cannot.configure.project.untrusted": "Güvenilmeyen bir çalışma alanında proje yapılandırılamıyor.",
 	"attempting.configure.after.failed.preconfigure": "Başarısız bir ön yapılandırmadan sonra yapılandırma çalıştırılmaya çalışılıyor.",
 	"make.configuring.title": "Yapılandırılıyor",