Add tests for junos_jsnapy

.travis.yml

@@ -7,7 +7,7 @@ dist: trusty
 
 env:
   - ANSIBLE_VERSION=2.2.0.0
-  
+
 
 install:
   - pip install -r requirements.txt
@@ -22,4 +22,6 @@ install:
 script:
   - ansible-playbook -i ravello.ini pb.rav.token.create-deploy.yaml
   - ansible-playbook -i ravello.ini pb.rav.token.fqdn_get.yaml
+## Execute Tests
   - ansible-playbook -i ravello.ini pb.junos_ping.yaml
+  - ansible-playbook -i ravello.ini pb.junos_jsnapy.yaml

tests/junos_jsnapy/add_loopback.set

@@ -0,0 +1,3 @@
+set routing-instances LO10 interface lo0.10
+set routing-instances LO10 instance-type virtual-router
+set interfaces lo0 unit 10 family inet

tests/junos_jsnapy/delete_loopback.set

@@ -0,0 +1,2 @@
+delete routing-instances LO10
+delete interfaces lo0 unit 10

tests/junos_jsnapy/test_junos_storage.yml

@@ -0,0 +1,11 @@
+tests_include:
+  - check_storage
+
+check_storage:
+    - command: show system storage
+    - iterate:
+        xpath: //system-storage-information/filesystem[normalize-space(mounted-on)='/']
+        tests:
+          - is-lt: used-percent, 95
+            info: "File system {{post['mounted-on']}} use less than 95%"
+            err: "File system {{post['mounted-on']}} use  {{post['used-percent']}} %"

tests/junos_jsnapy/test_loopback.yml

@@ -0,0 +1,16 @@
+tests_include:
+  - test_command_version
+
+test_command_version:
+  - command: show interfaces terse lo*
+  - iterate:
+      xpath: //logical-interface
+      id: './name'
+      tests:
+        - list-not-more: admin-status
+          err: "Test Failed!! name list changed, <{{pre['admin-status']}}>  with name <{{id_0}}> is not found in post snapshot"
+          info: "Test successful!! name list is same, with name <{{id_0}}>"
+
+        - list-not-less: admin-status
+          err: "Test Failed!! name list changed, <{{pre['admin-status']}}>  with name <{{id_0}}> was not present in PRE snapshot"
+          info: "Test successful!! name list is same, with name <{{id_0}}>"

tests/junos_jsnapy/test_version.yml

@@ -0,0 +1,12 @@
+tests_include:
+  - test_version_check
+
+test_version_check:
+  - command: show version
+  - iterate:
+      id: host-name
+      xpath: //software-information
+      tests:
+        - exists: //package-information/name
+          info: "Test Succeeded!! node //package-information/name exists with name <{{pre['//package-information/name']}}> and hostname: <{{id_0}} > "
+          err: "Test Failed!!! node //package-information/name does not exists in  hostname: <{{id_0}}> !! "

tests/pb.junos_jsnapy.yaml

@@ -0,0 +1,217 @@
+---
+- name: Test junos_ping module
+  hosts: all
+  connection: local
+  gather_facts: no
+  roles:
+    - Juniper.junos
+  tasks:
+##################################################
+####    TEST 1                                  ##
+##################################################
+    - name: "TEST 1 - Execute SNAPCHECK with 1 test file / no dir"
+      junos_jsnapy:
+        host: "{{ ansible_ssh_host }}"
+        port: "{{ ansible_ssh_port }}"
+        user: "{{ ansible_ssh_user }}"
+        passwd: "{{ ansible_ssh_pass }}"
+        test_files: junos_jsnapy/test_junos_storage.yml
+        action: snapcheck
+      register: test1
+      ignore_errors: True
+      tags: [ test1 ]
+    # - debug: var=test1
+
+    - name: Check TEST 1
+      assert:
+        that:
+          - test1|succeeded
+          - test1.passPercentage == 100
+          - test1.total_tests == 1
+      tags: [ test1 ]
+
+##################################################
+####    TEST 2                                  ##
+##################################################
+    - name: "TEST 2 - Execute SNAPCHECK with 2 test file & dir"
+      junos_jsnapy:
+        host: "{{ ansible_ssh_host }}"
+        port: "{{ ansible_ssh_port }}"
+        user: "{{ ansible_ssh_user }}"
+        passwd: "{{ ansible_ssh_pass }}"
+        test_files:
+          - test_junos_storage.yml
+          - test_version.yml
+        dir: junos_jsnapy
+        action: snapcheck
+      register: test2
+      ignore_errors: True
+      tags: [ test2 ]
+    # - debug: var=test2
+
+    - name: Check TEST 2
+      assert:
+        that:
+          - test2|succeeded
+          - test2.passPercentage == 100
+          - test2.total_tests == 2
+      tags: [ test2 ]
+
+##################################################
+####    TEST 3                                  ##
+##################################################
+    - name: "TEST 3 - Wrong test file"
+      junos_jsnapy:
+        host: "{{ ansible_ssh_host }}"
+        port: "{{ ansible_ssh_port }}"
+        user: "{{ ansible_ssh_user }}"
+        passwd: "{{ ansible_ssh_pass }}"
+        test_files: file_that_doesnt_exist.yml
+        action: snapcheck
+      register: test3
+      ignore_errors: True
+      tags: [ test3 ]
+    # - debug: var=test3
+
+    - name: Check TEST 3
+      assert:
+        that:
+          - test3|failed
+      tags: [ test3 ]
+
+##################################################
+####    TEST 4                                  ##
+##################################################
+    - name: "TEST 4 - SNAP_PRE"
+      junos_jsnapy:
+        host: "{{ ansible_ssh_host }}"
+        port: "{{ ansible_ssh_port }}"
+        user: "{{ ansible_ssh_user }}"
+        passwd: "{{ ansible_ssh_pass }}"
+        test_files: junos_jsnapy/test_loopback.yml
+        action: snap_pre
+      register: test4
+      ignore_errors: True
+      tags: [ test4 ]
+
+    # - debug: var=test4
+
+    - name: Check TEST 4
+      assert:
+        that:
+          - test4|succeeded
+      tags: [ test4 ]
+
+##################################################
+####    TEST 5                                  ##
+##################################################
+    - name: "TEST 5 - SNAP_POST"
+      junos_jsnapy:
+        host: "{{ ansible_ssh_host }}"
+        port: "{{ ansible_ssh_port }}"
+        user: "{{ ansible_ssh_user }}"
+        passwd: "{{ ansible_ssh_pass }}"
+        test_files: junos_jsnapy/test_loopback.yml
+        action: snap_post
+      register: test5
+      ignore_errors: True
+      tags: [ test5 ]
+
+    # - debug: var=test5
+
+    - name: Check TEST 5
+      assert:
+        that:
+          - test5|succeeded
+      tags: [ test5 ]
+
+##################################################
+####    TEST 6                                  ##
+##################################################
+    - name: "TEST 6 - CHECK"
+      junos_jsnapy:
+        host: "{{ ansible_ssh_host }}"
+        port: "{{ ansible_ssh_port }}"
+        user: "{{ ansible_ssh_user }}"
+        passwd: "{{ ansible_ssh_pass }}"
+        test_files: junos_jsnapy/test_loopback.yml
+        action: check
+      register: test6
+      ignore_errors: True
+      tags: [ test6 ]
+
+    - debug: var=test6
+
+    - name: Check TEST 6
+      assert:
+        that:
+          - test6|succeeded
+          - test6.passPercentage == 100
+      tags: [ test6 ]
+
+##################################################
+####    TEST 7                                  ##
+##################################################
+    - name: "PRE-TEST 7 - Add loopback address"
+      junos_install_config:
+        host: "{{ ansible_ssh_host }}"
+        port: "{{ ansible_ssh_port }}"
+        user: "{{ ansible_ssh_user }}"
+        passwd: "{{ ansible_ssh_pass }}"
+        file: junos_jsnapy/add_loopback.set
+        overwrite: no
+      register: test7_1
+      ignore_errors: True
+      tags: [ test7 ]
+
+    - name: Wait for loopback to come up
+      pause: seconds=15
+
+    - name: "TEST 7 - SNAP_POST with additional loopback"
+      junos_jsnapy:
+        host: "{{ ansible_ssh_host }}"
+        port: "{{ ansible_ssh_port }}"
+        user: "{{ ansible_ssh_user }}"
+        passwd: "{{ ansible_ssh_pass }}"
+        test_files: junos_jsnapy/test_loopback.yml
+        action: snap_post
+      register: test7_2
+      ignore_errors: True
+      tags: [ test7 ]
+    # - debug: var=pretest7
+
+    - name: "TEST 7 - CHECK"
+      junos_jsnapy:
+        host: "{{ ansible_ssh_host }}"
+        port: "{{ ansible_ssh_port }}"
+        user: "{{ ansible_ssh_user }}"
+        passwd: "{{ ansible_ssh_pass }}"
+        test_files: junos_jsnapy/test_loopback.yml
+        action: check
+      register: test7
+      ignore_errors: True
+      tags: [ test7 ]
+    - debug: var=test7
+
+    - name: "TEST 7 - Cleanup"
+      junos_install_config:
+        host: "{{ ansible_ssh_host }}"
+        port: "{{ ansible_ssh_port }}"
+        user: "{{ ansible_ssh_user }}"
+        passwd: "{{ ansible_ssh_pass }}"
+        file: junos_jsnapy/delete_loopback.set
+        overwrite: no
+      register: test7_3
+      ignore_errors: True
+      tags: [ test7 ]
+
+    - name: Check TEST 7
+      assert:
+        that:
+          - test7_1|succeeded
+          - test7_2|succeeded
+          - test7_3|succeeded
+          - test7|succeeded
+          - test7.passPercentage == 50
+          - test7.total_tests == 2
+      tags: [ test7 ]