aom/vp9/encoder/vp9_mcomp.c

2172 строки
66 KiB
C
Исходник Обычный вид История

2010-05-18 19:58:33 +04:00
/*
* Copyright (c) 2010 The WebM project authors. All Rights Reserved.
2010-05-18 19:58:33 +04:00
*
* Use of this source code is governed by a BSD-style license
* that can be found in the LICENSE file in the root of the source
* tree. An additional intellectual property rights grant can be found
* in the file PATENTS. All contributing project authors may
* be found in the AUTHORS file in the root of the source tree.
2010-05-18 19:58:33 +04:00
*/
#include "vp9/encoder/vp9_onyx_int.h"
#include "vp9/encoder/vp9_mcomp.h"
2010-05-18 19:58:33 +04:00
#include "vpx_mem/vpx_mem.h"
#include "./vpx_config.h"
2010-05-18 19:58:33 +04:00
#include <stdio.h>
#include <limits.h>
#include <math.h>
#include "vp9/common/vp9_findnearmv.h"
#include "vp9/common/vp9_common.h"
2010-05-18 19:58:33 +04:00
#ifdef ENTROPY_STATS
static int mv_ref_ct [31] [4] [2];
static int mv_mode_cts [4] [2];
#endif
void vp9_clamp_mv_min_max(MACROBLOCK *x, int_mv *ref_mv) {
int col_min = (ref_mv->as_mv.col >> 3) - MAX_FULL_PEL_VAL +
((ref_mv->as_mv.col & 7) ? 1 : 0);
int row_min = (ref_mv->as_mv.row >> 3) - MAX_FULL_PEL_VAL +
((ref_mv->as_mv.row & 7) ? 1 : 0);
int col_max = (ref_mv->as_mv.col >> 3) + MAX_FULL_PEL_VAL;
int row_max = (ref_mv->as_mv.row >> 3) + MAX_FULL_PEL_VAL;
/* Get intersection of UMV window and valid MV window to reduce # of checks in diamond search. */
if (x->mv_col_min < col_min)
x->mv_col_min = col_min;
if (x->mv_col_max > col_max)
x->mv_col_max = col_max;
if (x->mv_row_min < row_min)
x->mv_row_min = row_min;
if (x->mv_row_max > row_max)
x->mv_row_max = row_max;
}
int vp9_mv_bit_cost(int_mv *mv, int_mv *ref, int *mvjcost, int *mvcost[2],
int Weight, int ishp) {
MV v;
v.row = (mv->as_mv.row - ref->as_mv.row);
v.col = (mv->as_mv.col - ref->as_mv.col);
return ((mvjcost[vp9_get_mv_joint(v)] +
mvcost[0][v.row] + mvcost[1][v.col]) *
Weight) >> 7;
2010-05-18 19:58:33 +04:00
}
static int mv_err_cost(int_mv *mv, int_mv *ref, int *mvjcost, int *mvcost[2],
int error_per_bit, int ishp) {
if (mvcost) {
MV v;
v.row = (mv->as_mv.row - ref->as_mv.row);
v.col = (mv->as_mv.col - ref->as_mv.col);
return ((mvjcost[vp9_get_mv_joint(v)] +
mvcost[0][v.row] + mvcost[1][v.col]) *
error_per_bit + 128) >> 8;
}
return 0;
}
static int mvsad_err_cost(int_mv *mv, int_mv *ref, int *mvjsadcost,
int *mvsadcost[2], int error_per_bit) {
if (mvsadcost) {
MV v;
v.row = (mv->as_mv.row - ref->as_mv.row);
v.col = (mv->as_mv.col - ref->as_mv.col);
return ((mvjsadcost[vp9_get_mv_joint(v)] +
mvsadcost[0][v.row] + mvsadcost[1][v.col]) *
error_per_bit + 128) >> 8;
}
return 0;
2010-05-18 19:58:33 +04:00
}
void vp9_init_dsmotion_compensation(MACROBLOCK *x, int stride) {
int Len;
int search_site_count = 0;
2010-05-18 19:58:33 +04:00
// Generate offsets for 4 search sites per step.
Len = MAX_FIRST_STEP;
x->ss[search_site_count].mv.col = 0;
x->ss[search_site_count].mv.row = 0;
x->ss[search_site_count].offset = 0;
search_site_count++;
while (Len > 0) {
// Compute offsets for search sites.
x->ss[search_site_count].mv.col = 0;
x->ss[search_site_count].mv.row = -Len;
x->ss[search_site_count].offset = -Len * stride;
search_site_count++;
// Compute offsets for search sites.
2010-05-18 19:58:33 +04:00
x->ss[search_site_count].mv.col = 0;
x->ss[search_site_count].mv.row = Len;
x->ss[search_site_count].offset = Len * stride;
search_site_count++;
// Compute offsets for search sites.
x->ss[search_site_count].mv.col = -Len;
2010-05-18 19:58:33 +04:00
x->ss[search_site_count].mv.row = 0;
x->ss[search_site_count].offset = -Len;
2010-05-18 19:58:33 +04:00
search_site_count++;
// Compute offsets for search sites.
x->ss[search_site_count].mv.col = Len;
x->ss[search_site_count].mv.row = 0;
x->ss[search_site_count].offset = Len;
search_site_count++;
2010-05-18 19:58:33 +04:00
// Contract.
Len /= 2;
}
x->ss_count = search_site_count;
x->searches_per_step = 4;
2010-05-18 19:58:33 +04:00
}
void vp9_init3smotion_compensation(MACROBLOCK *x, int stride) {
int Len;
int search_site_count = 0;
// Generate offsets for 8 search sites per step.
Len = MAX_FIRST_STEP;
x->ss[search_site_count].mv.col = 0;
x->ss[search_site_count].mv.row = 0;
x->ss[search_site_count].offset = 0;
search_site_count++;
while (Len > 0) {
2010-05-18 19:58:33 +04:00
// Compute offsets for search sites.
2010-05-18 19:58:33 +04:00
x->ss[search_site_count].mv.col = 0;
x->ss[search_site_count].mv.row = -Len;
x->ss[search_site_count].offset = -Len * stride;
search_site_count++;
// Compute offsets for search sites.
x->ss[search_site_count].mv.col = 0;
x->ss[search_site_count].mv.row = Len;
x->ss[search_site_count].offset = Len * stride;
search_site_count++;
// Compute offsets for search sites.
x->ss[search_site_count].mv.col = -Len;
2010-05-18 19:58:33 +04:00
x->ss[search_site_count].mv.row = 0;
x->ss[search_site_count].offset = -Len;
2010-05-18 19:58:33 +04:00
search_site_count++;
// Compute offsets for search sites.
x->ss[search_site_count].mv.col = Len;
x->ss[search_site_count].mv.row = 0;
x->ss[search_site_count].offset = Len;
search_site_count++;
// Compute offsets for search sites.
x->ss[search_site_count].mv.col = -Len;
x->ss[search_site_count].mv.row = -Len;
x->ss[search_site_count].offset = -Len * stride - Len;
search_site_count++;
// Compute offsets for search sites.
x->ss[search_site_count].mv.col = Len;
x->ss[search_site_count].mv.row = -Len;
x->ss[search_site_count].offset = -Len * stride + Len;
search_site_count++;
// Compute offsets for search sites.
x->ss[search_site_count].mv.col = -Len;
x->ss[search_site_count].mv.row = Len;
x->ss[search_site_count].offset = Len * stride - Len;
search_site_count++;
// Compute offsets for search sites.
x->ss[search_site_count].mv.col = Len;
x->ss[search_site_count].mv.row = Len;
x->ss[search_site_count].offset = Len * stride + Len;
search_site_count++;
2010-05-18 19:58:33 +04:00
// Contract.
Len /= 2;
}
x->ss_count = search_site_count;
x->searches_per_step = 8;
2010-05-18 19:58:33 +04:00
}
/*
* To avoid the penalty for crossing cache-line read, preload the reference
* area in a small buffer, which is aligned to make sure there won't be crossing
* cache-line read while reading from this buffer. This reduced the cpu
* cycles spent on reading ref data in sub-pixel filter functions.
* TODO: Currently, since sub-pixel search range here is -3 ~ 3, copy 22 rows x
* 32 cols area that is enough for 16x16 macroblock. Later, for SPLITMV, we
* could reduce the area.
*/
Supporting high precision 1/8-pel motion vectors This is the initial patch for supporting 1/8th pel motion. Currently if we configure with enable-high-precision-mv, all motion vectors would default to 1/8 pel. Encode and decode syncs fine with the current code. In the next phase the code will be refactored so that we can choose the 1/8 pel mode adaptively at a frame/segment/mb level. Derf results: http://www.corp.google.com/~debargha/vp8_results/enhinterp_hpmv.html (about 0.83% better than 8-tap interpoaltion) Patch 3: Rebased. Also adding 1/16th pel interpolation for U and V Patch 4: HD results. http://www.corp.google.com/~debargha/vp8_results/enhinterp_hd_hpmv.html Seems impressive (unless I am doing something wrong). Patch 5: Added mmx/sse for bilateral filtering, as well as enforced use of c-versions of subpel filters with 8-taps and 1/16th pel; Also redesigned the 8-tap filters to reduce the cut-off in order to introduce a denoising effect. There is a new configure option sixteenth-subpel-uv which will use 1/16 th pel interpolation for uv, if the motion vectors have 1/8 pel accuracy. With the fixes the results are promising on the derf set. The enhanced interpolation option with 8-taps alone gives 3% improvement over thei derf set: http://www.corp.google.com/~debargha/vp8_results/enhinterpn.html Results on high precision mv and on the hd set are to follow. Patch 6: Adding a missing condition for CONFIG_SIXTEENTH_SUBPEL_UV in vp8/common/x86/x86_systemdependent.c Patch 7: Cleaning up various debug messages. Patch 8: Merge conflict Change-Id: I5b1d844457aefd7414a9e4e0e06c6ed38fd8cc04
2012-02-16 21:29:54 +04:00
/* estimated cost of a motion vector (r,c) */
#define MVC(r, c) \
(mvcost ? \
((mvjcost[((r) != rr) * 2 + ((c) != rc)] + \
mvcost[0][((r) - rr)] + mvcost[1][((c) - rc)]) * \
error_per_bit + 128) >> 8 : 0)
#define SP(x) (((x) & 7) << 1) // convert motion vector component to offset
// for svf calc
#define IFMVCV(r, c, s, e) \
if (c >= minc && c <= maxc && r >= minr && r <= maxr) \
s \
else \
e;
/* pointer to predictor base of a motionvector */
#define PRE(r, c) (y + (((r) >> 3) * y_stride + ((c) >> 3) -(offset)))
/* returns subpixel variance error function */
#define DIST(r, c) \
vfp->svf(PRE(r, c), y_stride, SP(c), SP(r), z, b->src_stride, &sse)
/* checks if (r, c) has better score than previous best */
#define CHECK_BETTER(v, r, c) \
IFMVCV(r, c, { \
thismse = (DIST(r, c)); \
if ((v = MVC(r, c) + thismse) < besterr) { \
besterr = v; \
br = r; \
bc = c; \
*distortion = thismse; \
*sse1 = sse; \
} \
}, \
v = INT_MAX;)
Supporting high precision 1/8-pel motion vectors This is the initial patch for supporting 1/8th pel motion. Currently if we configure with enable-high-precision-mv, all motion vectors would default to 1/8 pel. Encode and decode syncs fine with the current code. In the next phase the code will be refactored so that we can choose the 1/8 pel mode adaptively at a frame/segment/mb level. Derf results: http://www.corp.google.com/~debargha/vp8_results/enhinterp_hpmv.html (about 0.83% better than 8-tap interpoaltion) Patch 3: Rebased. Also adding 1/16th pel interpolation for U and V Patch 4: HD results. http://www.corp.google.com/~debargha/vp8_results/enhinterp_hd_hpmv.html Seems impressive (unless I am doing something wrong). Patch 5: Added mmx/sse for bilateral filtering, as well as enforced use of c-versions of subpel filters with 8-taps and 1/16th pel; Also redesigned the 8-tap filters to reduce the cut-off in order to introduce a denoising effect. There is a new configure option sixteenth-subpel-uv which will use 1/16 th pel interpolation for uv, if the motion vectors have 1/8 pel accuracy. With the fixes the results are promising on the derf set. The enhanced interpolation option with 8-taps alone gives 3% improvement over thei derf set: http://www.corp.google.com/~debargha/vp8_results/enhinterpn.html Results on high precision mv and on the hd set are to follow. Patch 6: Adding a missing condition for CONFIG_SIXTEENTH_SUBPEL_UV in vp8/common/x86/x86_systemdependent.c Patch 7: Cleaning up various debug messages. Patch 8: Merge conflict Change-Id: I5b1d844457aefd7414a9e4e0e06c6ed38fd8cc04
2012-02-16 21:29:54 +04:00
int vp9_find_best_sub_pixel_step_iteratively(MACROBLOCK *x, BLOCK *b, BLOCKD *d,
int_mv *bestmv, int_mv *ref_mv,
int error_per_bit,
const vp9_variance_fn_ptr_t *vfp,
int *mvjcost, int *mvcost[2],
int *distortion,
unsigned int *sse1) {
uint8_t *z = (*(b->base_src) + b->src);
MACROBLOCKD *xd = &x->e_mbd;
int rr, rc, br, bc, hstep;
int tr, tc;
unsigned int besterr = INT_MAX;
unsigned int left, right, up, down, diag;
unsigned int sse;
unsigned int whichdir;
unsigned int halfiters = 4;
unsigned int quarteriters = 4;
unsigned int eighthiters = 4;
int thismse;
int maxc, minc, maxr, minr;
int y_stride;
int offset;
int usehp = xd->allow_high_precision_mv;
2010-05-18 19:58:33 +04:00
uint8_t *y = *(d->base_pre) + d->pre +
(bestmv->as_mv.row) * d->pre_stride + bestmv->as_mv.col;
y_stride = d->pre_stride;
rr = ref_mv->as_mv.row;
rc = ref_mv->as_mv.col;
br = bestmv->as_mv.row << 3;
bc = bestmv->as_mv.col << 3;
hstep = 4;
minc = MAX(x->mv_col_min << 3, (ref_mv->as_mv.col) - ((1 << MV_MAX_BITS) - 1));
maxc = MIN(x->mv_col_max << 3, (ref_mv->as_mv.col) + ((1 << MV_MAX_BITS) - 1));
minr = MAX(x->mv_row_min << 3, (ref_mv->as_mv.row) - ((1 << MV_MAX_BITS) - 1));
maxr = MIN(x->mv_row_max << 3, (ref_mv->as_mv.row) + ((1 << MV_MAX_BITS) - 1));
tr = br;
tc = bc;
offset = (bestmv->as_mv.row) * y_stride + bestmv->as_mv.col;
// central mv
bestmv->as_mv.row <<= 3;
bestmv->as_mv.col <<= 3;
// calculate central point error
besterr = vfp->vf(y, y_stride, z, b->src_stride, sse1);
*distortion = besterr;
besterr += mv_err_cost(bestmv, ref_mv, mvjcost, mvcost,
error_per_bit, xd->allow_high_precision_mv);
2010-05-18 19:58:33 +04:00
// TODO: Each subsequent iteration checks at least one point in
// common with the last iteration could be 2 ( if diag selected)
while (--halfiters) {
// 1/2 pel
CHECK_BETTER(left, tr, tc - hstep);
CHECK_BETTER(right, tr, tc + hstep);
CHECK_BETTER(up, tr - hstep, tc);
CHECK_BETTER(down, tr + hstep, tc);
whichdir = (left < right ? 0 : 1) + (up < down ? 0 : 2);
switch (whichdir) {
case 0:
CHECK_BETTER(diag, tr - hstep, tc - hstep);
break;
case 1:
CHECK_BETTER(diag, tr - hstep, tc + hstep);
break;
case 2:
CHECK_BETTER(diag, tr + hstep, tc - hstep);
break;
case 3:
CHECK_BETTER(diag, tr + hstep, tc + hstep);
break;
}
// no reason to check the same one again.
if (tr == br && tc == bc)
break;
2010-05-18 19:58:33 +04:00
tr = br;
tc = bc;
}
2010-05-18 19:58:33 +04:00
// TODO: Each subsequent iteration checks at least one point in common with
// the last iteration could be 2 ( if diag selected) 1/4 pel
hstep >>= 1;
while (--quarteriters) {
CHECK_BETTER(left, tr, tc - hstep);
CHECK_BETTER(right, tr, tc + hstep);
CHECK_BETTER(up, tr - hstep, tc);
CHECK_BETTER(down, tr + hstep, tc);
2010-05-18 19:58:33 +04:00
whichdir = (left < right ? 0 : 1) + (up < down ? 0 : 2);
2010-05-18 19:58:33 +04:00
switch (whichdir) {
case 0:
CHECK_BETTER(diag, tr - hstep, tc - hstep);
break;
case 1:
CHECK_BETTER(diag, tr - hstep, tc + hstep);
break;
case 2:
CHECK_BETTER(diag, tr + hstep, tc - hstep);
break;
case 3:
CHECK_BETTER(diag, tr + hstep, tc + hstep);
break;
}
2010-05-18 19:58:33 +04:00
// no reason to check the same one again.
if (tr == br && tc == bc)
break;
2010-05-18 19:58:33 +04:00
tr = br;
tc = bc;
}
2010-05-18 19:58:33 +04:00
if (xd->allow_high_precision_mv) {
usehp = vp9_use_nmv_hp(&ref_mv->as_mv);
} else {
usehp = 0;
}
if (usehp) {
Supporting high precision 1/8-pel motion vectors This is the initial patch for supporting 1/8th pel motion. Currently if we configure with enable-high-precision-mv, all motion vectors would default to 1/8 pel. Encode and decode syncs fine with the current code. In the next phase the code will be refactored so that we can choose the 1/8 pel mode adaptively at a frame/segment/mb level. Derf results: http://www.corp.google.com/~debargha/vp8_results/enhinterp_hpmv.html (about 0.83% better than 8-tap interpoaltion) Patch 3: Rebased. Also adding 1/16th pel interpolation for U and V Patch 4: HD results. http://www.corp.google.com/~debargha/vp8_results/enhinterp_hd_hpmv.html Seems impressive (unless I am doing something wrong). Patch 5: Added mmx/sse for bilateral filtering, as well as enforced use of c-versions of subpel filters with 8-taps and 1/16th pel; Also redesigned the 8-tap filters to reduce the cut-off in order to introduce a denoising effect. There is a new configure option sixteenth-subpel-uv which will use 1/16 th pel interpolation for uv, if the motion vectors have 1/8 pel accuracy. With the fixes the results are promising on the derf set. The enhanced interpolation option with 8-taps alone gives 3% improvement over thei derf set: http://www.corp.google.com/~debargha/vp8_results/enhinterpn.html Results on high precision mv and on the hd set are to follow. Patch 6: Adding a missing condition for CONFIG_SIXTEENTH_SUBPEL_UV in vp8/common/x86/x86_systemdependent.c Patch 7: Cleaning up various debug messages. Patch 8: Merge conflict Change-Id: I5b1d844457aefd7414a9e4e0e06c6ed38fd8cc04
2012-02-16 21:29:54 +04:00
hstep >>= 1;
while (--eighthiters) {
CHECK_BETTER(left, tr, tc - hstep);
CHECK_BETTER(right, tr, tc + hstep);
CHECK_BETTER(up, tr - hstep, tc);
CHECK_BETTER(down, tr + hstep, tc);
2010-05-18 19:58:33 +04:00
whichdir = (left < right ? 0 : 1) + (up < down ? 0 : 2);
2010-05-18 19:58:33 +04:00
switch (whichdir) {
2010-05-18 19:58:33 +04:00
case 0:
CHECK_BETTER(diag, tr - hstep, tc - hstep);
break;
2010-05-18 19:58:33 +04:00
case 1:
CHECK_BETTER(diag, tr - hstep, tc + hstep);
break;
2010-05-18 19:58:33 +04:00
case 2:
CHECK_BETTER(diag, tr + hstep, tc - hstep);
break;
2010-05-18 19:58:33 +04:00
case 3:
CHECK_BETTER(diag, tr + hstep, tc + hstep);
break;
}
2010-05-18 19:58:33 +04:00
// no reason to check the same one again.
if (tr == br && tc == bc)
break;
Supporting high precision 1/8-pel motion vectors This is the initial patch for supporting 1/8th pel motion. Currently if we configure with enable-high-precision-mv, all motion vectors would default to 1/8 pel. Encode and decode syncs fine with the current code. In the next phase the code will be refactored so that we can choose the 1/8 pel mode adaptively at a frame/segment/mb level. Derf results: http://www.corp.google.com/~debargha/vp8_results/enhinterp_hpmv.html (about 0.83% better than 8-tap interpoaltion) Patch 3: Rebased. Also adding 1/16th pel interpolation for U and V Patch 4: HD results. http://www.corp.google.com/~debargha/vp8_results/enhinterp_hd_hpmv.html Seems impressive (unless I am doing something wrong). Patch 5: Added mmx/sse for bilateral filtering, as well as enforced use of c-versions of subpel filters with 8-taps and 1/16th pel; Also redesigned the 8-tap filters to reduce the cut-off in order to introduce a denoising effect. There is a new configure option sixteenth-subpel-uv which will use 1/16 th pel interpolation for uv, if the motion vectors have 1/8 pel accuracy. With the fixes the results are promising on the derf set. The enhanced interpolation option with 8-taps alone gives 3% improvement over thei derf set: http://www.corp.google.com/~debargha/vp8_results/enhinterpn.html Results on high precision mv and on the hd set are to follow. Patch 6: Adding a missing condition for CONFIG_SIXTEENTH_SUBPEL_UV in vp8/common/x86/x86_systemdependent.c Patch 7: Cleaning up various debug messages. Patch 8: Merge conflict Change-Id: I5b1d844457aefd7414a9e4e0e06c6ed38fd8cc04
2012-02-16 21:29:54 +04:00
tr = br;
tc = bc;
Supporting high precision 1/8-pel motion vectors This is the initial patch for supporting 1/8th pel motion. Currently if we configure with enable-high-precision-mv, all motion vectors would default to 1/8 pel. Encode and decode syncs fine with the current code. In the next phase the code will be refactored so that we can choose the 1/8 pel mode adaptively at a frame/segment/mb level. Derf results: http://www.corp.google.com/~debargha/vp8_results/enhinterp_hpmv.html (about 0.83% better than 8-tap interpoaltion) Patch 3: Rebased. Also adding 1/16th pel interpolation for U and V Patch 4: HD results. http://www.corp.google.com/~debargha/vp8_results/enhinterp_hd_hpmv.html Seems impressive (unless I am doing something wrong). Patch 5: Added mmx/sse for bilateral filtering, as well as enforced use of c-versions of subpel filters with 8-taps and 1/16th pel; Also redesigned the 8-tap filters to reduce the cut-off in order to introduce a denoising effect. There is a new configure option sixteenth-subpel-uv which will use 1/16 th pel interpolation for uv, if the motion vectors have 1/8 pel accuracy. With the fixes the results are promising on the derf set. The enhanced interpolation option with 8-taps alone gives 3% improvement over thei derf set: http://www.corp.google.com/~debargha/vp8_results/enhinterpn.html Results on high precision mv and on the hd set are to follow. Patch 6: Adding a missing condition for CONFIG_SIXTEENTH_SUBPEL_UV in vp8/common/x86/x86_systemdependent.c Patch 7: Cleaning up various debug messages. Patch 8: Merge conflict Change-Id: I5b1d844457aefd7414a9e4e0e06c6ed38fd8cc04
2012-02-16 21:29:54 +04:00
}
}
bestmv->as_mv.row = br;
bestmv->as_mv.col = bc;
2010-05-18 19:58:33 +04:00
if ((abs(bestmv->as_mv.col - ref_mv->as_mv.col) > (MAX_FULL_PEL_VAL << 3)) ||
(abs(bestmv->as_mv.row - ref_mv->as_mv.row) > (MAX_FULL_PEL_VAL << 3)))
return INT_MAX;
2010-05-18 19:58:33 +04:00
return besterr;
2010-05-18 19:58:33 +04:00
}
#undef MVC
#undef PRE
#undef DIST
#undef IFMVCV
2010-05-18 19:58:33 +04:00
#undef CHECK_BETTER
#undef MIN
#undef MAX
Supporting high precision 1/8-pel motion vectors This is the initial patch for supporting 1/8th pel motion. Currently if we configure with enable-high-precision-mv, all motion vectors would default to 1/8 pel. Encode and decode syncs fine with the current code. In the next phase the code will be refactored so that we can choose the 1/8 pel mode adaptively at a frame/segment/mb level. Derf results: http://www.corp.google.com/~debargha/vp8_results/enhinterp_hpmv.html (about 0.83% better than 8-tap interpoaltion) Patch 3: Rebased. Also adding 1/16th pel interpolation for U and V Patch 4: HD results. http://www.corp.google.com/~debargha/vp8_results/enhinterp_hd_hpmv.html Seems impressive (unless I am doing something wrong). Patch 5: Added mmx/sse for bilateral filtering, as well as enforced use of c-versions of subpel filters with 8-taps and 1/16th pel; Also redesigned the 8-tap filters to reduce the cut-off in order to introduce a denoising effect. There is a new configure option sixteenth-subpel-uv which will use 1/16 th pel interpolation for uv, if the motion vectors have 1/8 pel accuracy. With the fixes the results are promising on the derf set. The enhanced interpolation option with 8-taps alone gives 3% improvement over thei derf set: http://www.corp.google.com/~debargha/vp8_results/enhinterpn.html Results on high precision mv and on the hd set are to follow. Patch 6: Adding a missing condition for CONFIG_SIXTEENTH_SUBPEL_UV in vp8/common/x86/x86_systemdependent.c Patch 7: Cleaning up various debug messages. Patch 8: Merge conflict Change-Id: I5b1d844457aefd7414a9e4e0e06c6ed38fd8cc04
2012-02-16 21:29:54 +04:00
int vp9_find_best_sub_pixel_step(MACROBLOCK *x, BLOCK *b, BLOCKD *d,
int_mv *bestmv, int_mv *ref_mv,
int error_per_bit,
const vp9_variance_fn_ptr_t *vfp,
int *mvjcost, int *mvcost[2], int *distortion,
unsigned int *sse1) {
int bestmse = INT_MAX;
int_mv startmv;
int_mv this_mv;
int_mv orig_mv;
int yrow_movedback = 0, ycol_movedback = 0;
uint8_t *z = (*(b->base_src) + b->src);
int left, right, up, down, diag;
unsigned int sse;
int whichdir;
int thismse;
int y_stride;
MACROBLOCKD *xd = &x->e_mbd;
int usehp = xd->allow_high_precision_mv;
uint8_t *y = *(d->base_pre) + d->pre +
(bestmv->as_mv.row) * d->pre_stride + bestmv->as_mv.col;
y_stride = d->pre_stride;
2010-05-18 19:58:33 +04:00
// central mv
bestmv->as_mv.row <<= 3;
bestmv->as_mv.col <<= 3;
startmv = *bestmv;
orig_mv = *bestmv;
2010-05-18 19:58:33 +04:00
// calculate central point error
bestmse = vfp->vf(y, y_stride, z, b->src_stride, sse1);
*distortion = bestmse;
bestmse += mv_err_cost(bestmv, ref_mv, mvjcost, mvcost, error_per_bit,
xd->allow_high_precision_mv);
2010-05-18 19:58:33 +04:00
// go left then right and check error
this_mv.as_mv.row = startmv.as_mv.row;
this_mv.as_mv.col = ((startmv.as_mv.col - 8) | 4);
thismse = vfp->svf_halfpix_h(y - 1, y_stride, z, b->src_stride, &sse);
left = thismse + mv_err_cost(&this_mv, ref_mv, mvjcost, mvcost, error_per_bit,
xd->allow_high_precision_mv);
2010-05-18 19:58:33 +04:00
if (left < bestmse) {
*bestmv = this_mv;
bestmse = left;
*distortion = thismse;
*sse1 = sse;
}
2010-05-18 19:58:33 +04:00
this_mv.as_mv.col += 8;
thismse = vfp->svf_halfpix_h(y, y_stride, z, b->src_stride, &sse);
right = thismse + mv_err_cost(&this_mv, ref_mv, mvjcost, mvcost,
error_per_bit, xd->allow_high_precision_mv);
2010-05-18 19:58:33 +04:00
if (right < bestmse) {
*bestmv = this_mv;
bestmse = right;
*distortion = thismse;
*sse1 = sse;
}
// go up then down and check error
this_mv.as_mv.col = startmv.as_mv.col;
this_mv.as_mv.row = ((startmv.as_mv.row - 8) | 4);
thismse = vfp->svf_halfpix_v(y - y_stride, y_stride, z, b->src_stride, &sse);
up = thismse + mv_err_cost(&this_mv, ref_mv, mvjcost, mvcost, error_per_bit,
xd->allow_high_precision_mv);
2010-05-18 19:58:33 +04:00
if (up < bestmse) {
*bestmv = this_mv;
bestmse = up;
*distortion = thismse;
*sse1 = sse;
}
2010-05-18 19:58:33 +04:00
this_mv.as_mv.row += 8;
thismse = vfp->svf_halfpix_v(y, y_stride, z, b->src_stride, &sse);
down = thismse + mv_err_cost(&this_mv, ref_mv, mvjcost, mvcost, error_per_bit,
xd->allow_high_precision_mv);
2010-05-18 19:58:33 +04:00
if (down < bestmse) {
*bestmv = this_mv;
bestmse = down;
*distortion = thismse;
*sse1 = sse;
}
2010-05-18 19:58:33 +04:00
// now check 1 more diagonal
whichdir = (left < right ? 0 : 1) + (up < down ? 0 : 2);
// for(whichdir =0;whichdir<4;whichdir++)
// {
this_mv = startmv;
2010-05-18 19:58:33 +04:00
switch (whichdir) {
2010-05-18 19:58:33 +04:00
case 0:
this_mv.as_mv.col = (this_mv.as_mv.col - 8) | 4;
this_mv.as_mv.row = (this_mv.as_mv.row - 8) | 4;
thismse = vfp->svf_halfpix_hv(y - 1 - y_stride, y_stride, z, b->src_stride, &sse);
break;
2010-05-18 19:58:33 +04:00
case 1:
this_mv.as_mv.col += 4;
this_mv.as_mv.row = (this_mv.as_mv.row - 8) | 4;
thismse = vfp->svf_halfpix_hv(y - y_stride, y_stride, z, b->src_stride, &sse);
break;
2010-05-18 19:58:33 +04:00
case 2:
this_mv.as_mv.col = (this_mv.as_mv.col - 8) | 4;
this_mv.as_mv.row += 4;
thismse = vfp->svf_halfpix_hv(y - 1, y_stride, z, b->src_stride, &sse);
break;
2010-05-18 19:58:33 +04:00
case 3:
default:
this_mv.as_mv.col += 4;
this_mv.as_mv.row += 4;
thismse = vfp->svf_halfpix_hv(y, y_stride, z, b->src_stride, &sse);
break;
}
2010-05-18 19:58:33 +04:00
diag = thismse + mv_err_cost(&this_mv, ref_mv, mvjcost, mvcost, error_per_bit,
xd->allow_high_precision_mv);
2010-05-18 19:58:33 +04:00
if (diag < bestmse) {
*bestmv = this_mv;
bestmse = diag;
*distortion = thismse;
*sse1 = sse;
}
2010-05-18 19:58:33 +04:00
// }
// time to check quarter pels.
if (bestmv->as_mv.row < startmv.as_mv.row) {
y -= y_stride;
yrow_movedback = 1;
}
2010-05-18 19:58:33 +04:00
if (bestmv->as_mv.col < startmv.as_mv.col) {
y--;
ycol_movedback = 1;
}
2010-05-18 19:58:33 +04:00
startmv = *bestmv;
2010-05-18 19:58:33 +04:00
// go left then right and check error
this_mv.as_mv.row = startmv.as_mv.row;
2010-05-18 19:58:33 +04:00
if (startmv.as_mv.col & 7) {
this_mv.as_mv.col = startmv.as_mv.col - 2;
thismse = vfp->svf(y, y_stride,
SP(this_mv.as_mv.col), SP(this_mv.as_mv.row),
z, b->src_stride, &sse);
} else {
this_mv.as_mv.col = (startmv.as_mv.col - 8) | 6;
thismse = vfp->svf(y - 1, y_stride, SP(6), SP(this_mv.as_mv.row), z,
b->src_stride, &sse);
}
2010-05-18 19:58:33 +04:00
left = thismse + mv_err_cost(&this_mv, ref_mv, mvjcost, mvcost, error_per_bit,
xd->allow_high_precision_mv);
2010-05-18 19:58:33 +04:00
if (left < bestmse) {
*bestmv = this_mv;
bestmse = left;
*distortion = thismse;
*sse1 = sse;
}
2010-05-18 19:58:33 +04:00
this_mv.as_mv.col += 4;
thismse = vfp->svf(y, y_stride,
SP(this_mv.as_mv.col), SP(this_mv.as_mv.row),
z, b->src_stride, &sse);
right = thismse + mv_err_cost(&this_mv, ref_mv, mvjcost, mvcost,
error_per_bit, xd->allow_high_precision_mv);
2010-05-18 19:58:33 +04:00
if (right < bestmse) {
*bestmv = this_mv;
bestmse = right;
*distortion = thismse;
*sse1 = sse;
}
2010-05-18 19:58:33 +04:00
// go up then down and check error
this_mv.as_mv.col = startmv.as_mv.col;
2010-05-18 19:58:33 +04:00
if (startmv.as_mv.row & 7) {
this_mv.as_mv.row = startmv.as_mv.row - 2;
thismse = vfp->svf(y, y_stride,
SP(this_mv.as_mv.col), SP(this_mv.as_mv.row),
z, b->src_stride, &sse);
} else {
this_mv.as_mv.row = (startmv.as_mv.row - 8) | 6;
thismse = vfp->svf(y - y_stride, y_stride, SP(this_mv.as_mv.col), SP(6),
z, b->src_stride, &sse);
}
2010-05-18 19:58:33 +04:00
up = thismse + mv_err_cost(&this_mv, ref_mv, mvjcost, mvcost, error_per_bit,
xd->allow_high_precision_mv);
2010-05-18 19:58:33 +04:00
if (up < bestmse) {
*bestmv = this_mv;
bestmse = up;
*distortion = thismse;
*sse1 = sse;
}
2010-05-18 19:58:33 +04:00
this_mv.as_mv.row += 4;
thismse = vfp->svf(y, y_stride, SP(this_mv.as_mv.col), SP(this_mv.as_mv.row),
z, b->src_stride, &sse);
down = thismse + mv_err_cost(&this_mv, ref_mv, mvjcost, mvcost, error_per_bit,
xd->allow_high_precision_mv);
2010-05-18 19:58:33 +04:00
if (down < bestmse) {
*bestmv = this_mv;
bestmse = down;
*distortion = thismse;
*sse1 = sse;
}
2010-05-18 19:58:33 +04:00
// now check 1 more diagonal
whichdir = (left < right ? 0 : 1) + (up < down ? 0 : 2);
2010-05-18 19:58:33 +04:00
// for(whichdir=0;whichdir<4;whichdir++)
// {
this_mv = startmv;
2010-05-18 19:58:33 +04:00
switch (whichdir) {
2010-05-18 19:58:33 +04:00
case 0:
if (startmv.as_mv.row & 7) {
this_mv.as_mv.row -= 2;
2010-05-18 19:58:33 +04:00
if (startmv.as_mv.col & 7) {
this_mv.as_mv.col -= 2;
thismse = vfp->svf(y, y_stride, SP(this_mv.as_mv.col), SP(this_mv.as_mv.row), z, b->src_stride, &sse);
} else {
this_mv.as_mv.col = (startmv.as_mv.col - 8) | 6;
thismse = vfp->svf(y - 1, y_stride, SP(6), SP(this_mv.as_mv.row), z, b->src_stride, &sse);;
2010-05-18 19:58:33 +04:00
}
} else {
this_mv.as_mv.row = (startmv.as_mv.row - 8) | 6;
if (startmv.as_mv.col & 7) {
this_mv.as_mv.col -= 2;
thismse = vfp->svf(y - y_stride, y_stride, SP(this_mv.as_mv.col), SP(6), z, b->src_stride, &sse);
} else {
this_mv.as_mv.col = (startmv.as_mv.col - 8) | 6;
thismse = vfp->svf(y - y_stride - 1, y_stride, SP(6), SP(6), z, b->src_stride, &sse);
2010-05-18 19:58:33 +04:00
}
}
2010-05-18 19:58:33 +04:00
break;
2010-05-18 19:58:33 +04:00
case 1:
this_mv.as_mv.col += 2;
2010-05-18 19:58:33 +04:00
if (startmv.as_mv.row & 7) {
this_mv.as_mv.row -= 2;
thismse = vfp->svf(y, y_stride, SP(this_mv.as_mv.col), SP(this_mv.as_mv.row), z, b->src_stride, &sse);
} else {
this_mv.as_mv.row = (startmv.as_mv.row - 8) | 6;
thismse = vfp->svf(y - y_stride, y_stride, SP(this_mv.as_mv.col), SP(6), z, b->src_stride, &sse);
}
2010-05-18 19:58:33 +04:00
break;
2010-05-18 19:58:33 +04:00
case 2:
this_mv.as_mv.row += 2;
2010-05-18 19:58:33 +04:00
if (startmv.as_mv.col & 7) {
this_mv.as_mv.col -= 2;
thismse = vfp->svf(y, y_stride, SP(this_mv.as_mv.col), SP(this_mv.as_mv.row),
z, b->src_stride, &sse);
} else {
this_mv.as_mv.col = (startmv.as_mv.col - 8) | 6;
thismse = vfp->svf(y - 1, y_stride, SP(6), SP(this_mv.as_mv.row), z,
b->src_stride, &sse);
}
2010-05-18 19:58:33 +04:00
break;
2010-05-18 19:58:33 +04:00
case 3:
this_mv.as_mv.col += 2;
this_mv.as_mv.row += 2;
thismse = vfp->svf(y, y_stride,
SP(this_mv.as_mv.col), SP(this_mv.as_mv.row),
z, b->src_stride, &sse);
break;
}
2010-05-18 19:58:33 +04:00
diag = thismse + mv_err_cost(&this_mv, ref_mv, mvjcost, mvcost, error_per_bit,
xd->allow_high_precision_mv);
2010-05-18 19:58:33 +04:00
if (diag < bestmse) {
*bestmv = this_mv;
bestmse = diag;
*distortion = thismse;
*sse1 = sse;
}
2010-05-18 19:58:33 +04:00
if (x->e_mbd.allow_high_precision_mv) {
usehp = vp9_use_nmv_hp(&ref_mv->as_mv);
} else {
usehp = 0;
}
if (!usehp)
return bestmse;
Supporting high precision 1/8-pel motion vectors This is the initial patch for supporting 1/8th pel motion. Currently if we configure with enable-high-precision-mv, all motion vectors would default to 1/8 pel. Encode and decode syncs fine with the current code. In the next phase the code will be refactored so that we can choose the 1/8 pel mode adaptively at a frame/segment/mb level. Derf results: http://www.corp.google.com/~debargha/vp8_results/enhinterp_hpmv.html (about 0.83% better than 8-tap interpoaltion) Patch 3: Rebased. Also adding 1/16th pel interpolation for U and V Patch 4: HD results. http://www.corp.google.com/~debargha/vp8_results/enhinterp_hd_hpmv.html Seems impressive (unless I am doing something wrong). Patch 5: Added mmx/sse for bilateral filtering, as well as enforced use of c-versions of subpel filters with 8-taps and 1/16th pel; Also redesigned the 8-tap filters to reduce the cut-off in order to introduce a denoising effect. There is a new configure option sixteenth-subpel-uv which will use 1/16 th pel interpolation for uv, if the motion vectors have 1/8 pel accuracy. With the fixes the results are promising on the derf set. The enhanced interpolation option with 8-taps alone gives 3% improvement over thei derf set: http://www.corp.google.com/~debargha/vp8_results/enhinterpn.html Results on high precision mv and on the hd set are to follow. Patch 6: Adding a missing condition for CONFIG_SIXTEENTH_SUBPEL_UV in vp8/common/x86/x86_systemdependent.c Patch 7: Cleaning up various debug messages. Patch 8: Merge conflict Change-Id: I5b1d844457aefd7414a9e4e0e06c6ed38fd8cc04
2012-02-16 21:29:54 +04:00
/* Now do 1/8th pixel */
if (bestmv->as_mv.row < orig_mv.as_mv.row && !yrow_movedback) {
y -= y_stride;
yrow_movedback = 1;
}
Supporting high precision 1/8-pel motion vectors This is the initial patch for supporting 1/8th pel motion. Currently if we configure with enable-high-precision-mv, all motion vectors would default to 1/8 pel. Encode and decode syncs fine with the current code. In the next phase the code will be refactored so that we can choose the 1/8 pel mode adaptively at a frame/segment/mb level. Derf results: http://www.corp.google.com/~debargha/vp8_results/enhinterp_hpmv.html (about 0.83% better than 8-tap interpoaltion) Patch 3: Rebased. Also adding 1/16th pel interpolation for U and V Patch 4: HD results. http://www.corp.google.com/~debargha/vp8_results/enhinterp_hd_hpmv.html Seems impressive (unless I am doing something wrong). Patch 5: Added mmx/sse for bilateral filtering, as well as enforced use of c-versions of subpel filters with 8-taps and 1/16th pel; Also redesigned the 8-tap filters to reduce the cut-off in order to introduce a denoising effect. There is a new configure option sixteenth-subpel-uv which will use 1/16 th pel interpolation for uv, if the motion vectors have 1/8 pel accuracy. With the fixes the results are promising on the derf set. The enhanced interpolation option with 8-taps alone gives 3% improvement over thei derf set: http://www.corp.google.com/~debargha/vp8_results/enhinterpn.html Results on high precision mv and on the hd set are to follow. Patch 6: Adding a missing condition for CONFIG_SIXTEENTH_SUBPEL_UV in vp8/common/x86/x86_systemdependent.c Patch 7: Cleaning up various debug messages. Patch 8: Merge conflict Change-Id: I5b1d844457aefd7414a9e4e0e06c6ed38fd8cc04
2012-02-16 21:29:54 +04:00
if (bestmv->as_mv.col < orig_mv.as_mv.col && !ycol_movedback) {
y--;
ycol_movedback = 1;
}
Supporting high precision 1/8-pel motion vectors This is the initial patch for supporting 1/8th pel motion. Currently if we configure with enable-high-precision-mv, all motion vectors would default to 1/8 pel. Encode and decode syncs fine with the current code. In the next phase the code will be refactored so that we can choose the 1/8 pel mode adaptively at a frame/segment/mb level. Derf results: http://www.corp.google.com/~debargha/vp8_results/enhinterp_hpmv.html (about 0.83% better than 8-tap interpoaltion) Patch 3: Rebased. Also adding 1/16th pel interpolation for U and V Patch 4: HD results. http://www.corp.google.com/~debargha/vp8_results/enhinterp_hd_hpmv.html Seems impressive (unless I am doing something wrong). Patch 5: Added mmx/sse for bilateral filtering, as well as enforced use of c-versions of subpel filters with 8-taps and 1/16th pel; Also redesigned the 8-tap filters to reduce the cut-off in order to introduce a denoising effect. There is a new configure option sixteenth-subpel-uv which will use 1/16 th pel interpolation for uv, if the motion vectors have 1/8 pel accuracy. With the fixes the results are promising on the derf set. The enhanced interpolation option with 8-taps alone gives 3% improvement over thei derf set: http://www.corp.google.com/~debargha/vp8_results/enhinterpn.html Results on high precision mv and on the hd set are to follow. Patch 6: Adding a missing condition for CONFIG_SIXTEENTH_SUBPEL_UV in vp8/common/x86/x86_systemdependent.c Patch 7: Cleaning up various debug messages. Patch 8: Merge conflict Change-Id: I5b1d844457aefd7414a9e4e0e06c6ed38fd8cc04
2012-02-16 21:29:54 +04:00
startmv = *bestmv;
Supporting high precision 1/8-pel motion vectors This is the initial patch for supporting 1/8th pel motion. Currently if we configure with enable-high-precision-mv, all motion vectors would default to 1/8 pel. Encode and decode syncs fine with the current code. In the next phase the code will be refactored so that we can choose the 1/8 pel mode adaptively at a frame/segment/mb level. Derf results: http://www.corp.google.com/~debargha/vp8_results/enhinterp_hpmv.html (about 0.83% better than 8-tap interpoaltion) Patch 3: Rebased. Also adding 1/16th pel interpolation for U and V Patch 4: HD results. http://www.corp.google.com/~debargha/vp8_results/enhinterp_hd_hpmv.html Seems impressive (unless I am doing something wrong). Patch 5: Added mmx/sse for bilateral filtering, as well as enforced use of c-versions of subpel filters with 8-taps and 1/16th pel; Also redesigned the 8-tap filters to reduce the cut-off in order to introduce a denoising effect. There is a new configure option sixteenth-subpel-uv which will use 1/16 th pel interpolation for uv, if the motion vectors have 1/8 pel accuracy. With the fixes the results are promising on the derf set. The enhanced interpolation option with 8-taps alone gives 3% improvement over thei derf set: http://www.corp.google.com/~debargha/vp8_results/enhinterpn.html Results on high precision mv and on the hd set are to follow. Patch 6: Adding a missing condition for CONFIG_SIXTEENTH_SUBPEL_UV in vp8/common/x86/x86_systemdependent.c Patch 7: Cleaning up various debug messages. Patch 8: Merge conflict Change-Id: I5b1d844457aefd7414a9e4e0e06c6ed38fd8cc04
2012-02-16 21:29:54 +04:00
// go left then right and check error
this_mv.as_mv.row = startmv.as_mv.row;
Supporting high precision 1/8-pel motion vectors This is the initial patch for supporting 1/8th pel motion. Currently if we configure with enable-high-precision-mv, all motion vectors would default to 1/8 pel. Encode and decode syncs fine with the current code. In the next phase the code will be refactored so that we can choose the 1/8 pel mode adaptively at a frame/segment/mb level. Derf results: http://www.corp.google.com/~debargha/vp8_results/enhinterp_hpmv.html (about 0.83% better than 8-tap interpoaltion) Patch 3: Rebased. Also adding 1/16th pel interpolation for U and V Patch 4: HD results. http://www.corp.google.com/~debargha/vp8_results/enhinterp_hd_hpmv.html Seems impressive (unless I am doing something wrong). Patch 5: Added mmx/sse for bilateral filtering, as well as enforced use of c-versions of subpel filters with 8-taps and 1/16th pel; Also redesigned the 8-tap filters to reduce the cut-off in order to introduce a denoising effect. There is a new configure option sixteenth-subpel-uv which will use 1/16 th pel interpolation for uv, if the motion vectors have 1/8 pel accuracy. With the fixes the results are promising on the derf set. The enhanced interpolation option with 8-taps alone gives 3% improvement over thei derf set: http://www.corp.google.com/~debargha/vp8_results/enhinterpn.html Results on high precision mv and on the hd set are to follow. Patch 6: Adding a missing condition for CONFIG_SIXTEENTH_SUBPEL_UV in vp8/common/x86/x86_systemdependent.c Patch 7: Cleaning up various debug messages. Patch 8: Merge conflict Change-Id: I5b1d844457aefd7414a9e4e0e06c6ed38fd8cc04
2012-02-16 21:29:54 +04:00
if (startmv.as_mv.col & 7) {
this_mv.as_mv.col = startmv.as_mv.col - 1;
thismse = vfp->svf(y, y_stride,
SP(this_mv.as_mv.col), SP(this_mv.as_mv.row),
z, b->src_stride, &sse);
} else {
this_mv.as_mv.col = (startmv.as_mv.col - 8) | 7;
thismse = vfp->svf(y - 1, y_stride, SP(7), SP(this_mv.as_mv.row),
z, b->src_stride, &sse);
}
left = thismse + mv_err_cost(&this_mv, ref_mv, mvjcost, mvcost, error_per_bit,
xd->allow_high_precision_mv);
if (left < bestmse) {
*bestmv = this_mv;
bestmse = left;
*distortion = thismse;
*sse1 = sse;
}
this_mv.as_mv.col += 2;
thismse = vfp->svf(y, y_stride, SP(this_mv.as_mv.col), SP(this_mv.as_mv.row),
z, b->src_stride, &sse);
right = thismse + mv_err_cost(&this_mv, ref_mv, mvjcost, mvcost,
error_per_bit, xd->allow_high_precision_mv);
if (right < bestmse) {
*bestmv = this_mv;
bestmse = right;
*distortion = thismse;
*sse1 = sse;
}
// go up then down and check error
this_mv.as_mv.col = startmv.as_mv.col;
if (startmv.as_mv.row & 7) {
this_mv.as_mv.row = startmv.as_mv.row - 1;
thismse = vfp->svf(y, y_stride, SP(this_mv.as_mv.col), SP(this_mv.as_mv.row), z, b->src_stride, &sse);
} else {
this_mv.as_mv.row = (startmv.as_mv.row - 8) | 7;
thismse = vfp->svf(y - y_stride, y_stride, SP(this_mv.as_mv.col), SP(7), z, b->src_stride, &sse);
}
Supporting high precision 1/8-pel motion vectors This is the initial patch for supporting 1/8th pel motion. Currently if we configure with enable-high-precision-mv, all motion vectors would default to 1/8 pel. Encode and decode syncs fine with the current code. In the next phase the code will be refactored so that we can choose the 1/8 pel mode adaptively at a frame/segment/mb level. Derf results: http://www.corp.google.com/~debargha/vp8_results/enhinterp_hpmv.html (about 0.83% better than 8-tap interpoaltion) Patch 3: Rebased. Also adding 1/16th pel interpolation for U and V Patch 4: HD results. http://www.corp.google.com/~debargha/vp8_results/enhinterp_hd_hpmv.html Seems impressive (unless I am doing something wrong). Patch 5: Added mmx/sse for bilateral filtering, as well as enforced use of c-versions of subpel filters with 8-taps and 1/16th pel; Also redesigned the 8-tap filters to reduce the cut-off in order to introduce a denoising effect. There is a new configure option sixteenth-subpel-uv which will use 1/16 th pel interpolation for uv, if the motion vectors have 1/8 pel accuracy. With the fixes the results are promising on the derf set. The enhanced interpolation option with 8-taps alone gives 3% improvement over thei derf set: http://www.corp.google.com/~debargha/vp8_results/enhinterpn.html Results on high precision mv and on the hd set are to follow. Patch 6: Adding a missing condition for CONFIG_SIXTEENTH_SUBPEL_UV in vp8/common/x86/x86_systemdependent.c Patch 7: Cleaning up various debug messages. Patch 8: Merge conflict Change-Id: I5b1d844457aefd7414a9e4e0e06c6ed38fd8cc04
2012-02-16 21:29:54 +04:00
up = thismse + mv_err_cost(&this_mv, ref_mv, mvjcost, mvcost, error_per_bit,
xd->allow_high_precision_mv);
Supporting high precision 1/8-pel motion vectors This is the initial patch for supporting 1/8th pel motion. Currently if we configure with enable-high-precision-mv, all motion vectors would default to 1/8 pel. Encode and decode syncs fine with the current code. In the next phase the code will be refactored so that we can choose the 1/8 pel mode adaptively at a frame/segment/mb level. Derf results: http://www.corp.google.com/~debargha/vp8_results/enhinterp_hpmv.html (about 0.83% better than 8-tap interpoaltion) Patch 3: Rebased. Also adding 1/16th pel interpolation for U and V Patch 4: HD results. http://www.corp.google.com/~debargha/vp8_results/enhinterp_hd_hpmv.html Seems impressive (unless I am doing something wrong). Patch 5: Added mmx/sse for bilateral filtering, as well as enforced use of c-versions of subpel filters with 8-taps and 1/16th pel; Also redesigned the 8-tap filters to reduce the cut-off in order to introduce a denoising effect. There is a new configure option sixteenth-subpel-uv which will use 1/16 th pel interpolation for uv, if the motion vectors have 1/8 pel accuracy. With the fixes the results are promising on the derf set. The enhanced interpolation option with 8-taps alone gives 3% improvement over thei derf set: http://www.corp.google.com/~debargha/vp8_results/enhinterpn.html Results on high precision mv and on the hd set are to follow. Patch 6: Adding a missing condition for CONFIG_SIXTEENTH_SUBPEL_UV in vp8/common/x86/x86_systemdependent.c Patch 7: Cleaning up various debug messages. Patch 8: Merge conflict Change-Id: I5b1d844457aefd7414a9e4e0e06c6ed38fd8cc04
2012-02-16 21:29:54 +04:00
if (up < bestmse) {
*bestmv = this_mv;
bestmse = up;
*distortion = thismse;
*sse1 = sse;
}
Supporting high precision 1/8-pel motion vectors This is the initial patch for supporting 1/8th pel motion. Currently if we configure with enable-high-precision-mv, all motion vectors would default to 1/8 pel. Encode and decode syncs fine with the current code. In the next phase the code will be refactored so that we can choose the 1/8 pel mode adaptively at a frame/segment/mb level. Derf results: http://www.corp.google.com/~debargha/vp8_results/enhinterp_hpmv.html (about 0.83% better than 8-tap interpoaltion) Patch 3: Rebased. Also adding 1/16th pel interpolation for U and V Patch 4: HD results. http://www.corp.google.com/~debargha/vp8_results/enhinterp_hd_hpmv.html Seems impressive (unless I am doing something wrong). Patch 5: Added mmx/sse for bilateral filtering, as well as enforced use of c-versions of subpel filters with 8-taps and 1/16th pel; Also redesigned the 8-tap filters to reduce the cut-off in order to introduce a denoising effect. There is a new configure option sixteenth-subpel-uv which will use 1/16 th pel interpolation for uv, if the motion vectors have 1/8 pel accuracy. With the fixes the results are promising on the derf set. The enhanced interpolation option with 8-taps alone gives 3% improvement over thei derf set: http://www.corp.google.com/~debargha/vp8_results/enhinterpn.html Results on high precision mv and on the hd set are to follow. Patch 6: Adding a missing condition for CONFIG_SIXTEENTH_SUBPEL_UV in vp8/common/x86/x86_systemdependent.c Patch 7: Cleaning up various debug messages. Patch 8: Merge conflict Change-Id: I5b1d844457aefd7414a9e4e0e06c6ed38fd8cc04
2012-02-16 21:29:54 +04:00
this_mv.as_mv.row += 2;
thismse = vfp->svf(y, y_stride, SP(this_mv.as_mv.col), SP(this_mv.as_mv.row), z, b->src_stride, &sse);
down = thismse + mv_err_cost(&this_mv, ref_mv, mvjcost, mvcost, error_per_bit,
xd->allow_high_precision_mv);
Supporting high precision 1/8-pel motion vectors This is the initial patch for supporting 1/8th pel motion. Currently if we configure with enable-high-precision-mv, all motion vectors would default to 1/8 pel. Encode and decode syncs fine with the current code. In the next phase the code will be refactored so that we can choose the 1/8 pel mode adaptively at a frame/segment/mb level. Derf results: http://www.corp.google.com/~debargha/vp8_results/enhinterp_hpmv.html (about 0.83% better than 8-tap interpoaltion) Patch 3: Rebased. Also adding 1/16th pel interpolation for U and V Patch 4: HD results. http://www.corp.google.com/~debargha/vp8_results/enhinterp_hd_hpmv.html Seems impressive (unless I am doing something wrong). Patch 5: Added mmx/sse for bilateral filtering, as well as enforced use of c-versions of subpel filters with 8-taps and 1/16th pel; Also redesigned the 8-tap filters to reduce the cut-off in order to introduce a denoising effect. There is a new configure option sixteenth-subpel-uv which will use 1/16 th pel interpolation for uv, if the motion vectors have 1/8 pel accuracy. With the fixes the results are promising on the derf set. The enhanced interpolation option with 8-taps alone gives 3% improvement over thei derf set: http://www.corp.google.com/~debargha/vp8_results/enhinterpn.html Results on high precision mv and on the hd set are to follow. Patch 6: Adding a missing condition for CONFIG_SIXTEENTH_SUBPEL_UV in vp8/common/x86/x86_systemdependent.c Patch 7: Cleaning up various debug messages. Patch 8: Merge conflict Change-Id: I5b1d844457aefd7414a9e4e0e06c6ed38fd8cc04
2012-02-16 21:29:54 +04:00
if (down < bestmse) {
*bestmv = this_mv;
bestmse = down;
*distortion = thismse;
*sse1 = sse;
}
Supporting high precision 1/8-pel motion vectors This is the initial patch for supporting 1/8th pel motion. Currently if we configure with enable-high-precision-mv, all motion vectors would default to 1/8 pel. Encode and decode syncs fine with the current code. In the next phase the code will be refactored so that we can choose the 1/8 pel mode adaptively at a frame/segment/mb level. Derf results: http://www.corp.google.com/~debargha/vp8_results/enhinterp_hpmv.html (about 0.83% better than 8-tap interpoaltion) Patch 3: Rebased. Also adding 1/16th pel interpolation for U and V Patch 4: HD results. http://www.corp.google.com/~debargha/vp8_results/enhinterp_hd_hpmv.html Seems impressive (unless I am doing something wrong). Patch 5: Added mmx/sse for bilateral filtering, as well as enforced use of c-versions of subpel filters with 8-taps and 1/16th pel; Also redesigned the 8-tap filters to reduce the cut-off in order to introduce a denoising effect. There is a new configure option sixteenth-subpel-uv which will use 1/16 th pel interpolation for uv, if the motion vectors have 1/8 pel accuracy. With the fixes the results are promising on the derf set. The enhanced interpolation option with 8-taps alone gives 3% improvement over thei derf set: http://www.corp.google.com/~debargha/vp8_results/enhinterpn.html Results on high precision mv and on the hd set are to follow. Patch 6: Adding a missing condition for CONFIG_SIXTEENTH_SUBPEL_UV in vp8/common/x86/x86_systemdependent.c Patch 7: Cleaning up various debug messages. Patch 8: Merge conflict Change-Id: I5b1d844457aefd7414a9e4e0e06c6ed38fd8cc04
2012-02-16 21:29:54 +04:00
// now check 1 more diagonal
whichdir = (left < right ? 0 : 1) + (up < down ? 0 : 2);
Supporting high precision 1/8-pel motion vectors This is the initial patch for supporting 1/8th pel motion. Currently if we configure with enable-high-precision-mv, all motion vectors would default to 1/8 pel. Encode and decode syncs fine with the current code. In the next phase the code will be refactored so that we can choose the 1/8 pel mode adaptively at a frame/segment/mb level. Derf results: http://www.corp.google.com/~debargha/vp8_results/enhinterp_hpmv.html (about 0.83% better than 8-tap interpoaltion) Patch 3: Rebased. Also adding 1/16th pel interpolation for U and V Patch 4: HD results. http://www.corp.google.com/~debargha/vp8_results/enhinterp_hd_hpmv.html Seems impressive (unless I am doing something wrong). Patch 5: Added mmx/sse for bilateral filtering, as well as enforced use of c-versions of subpel filters with 8-taps and 1/16th pel; Also redesigned the 8-tap filters to reduce the cut-off in order to introduce a denoising effect. There is a new configure option sixteenth-subpel-uv which will use 1/16 th pel interpolation for uv, if the motion vectors have 1/8 pel accuracy. With the fixes the results are promising on the derf set. The enhanced interpolation option with 8-taps alone gives 3% improvement over thei derf set: http://www.corp.google.com/~debargha/vp8_results/enhinterpn.html Results on high precision mv and on the hd set are to follow. Patch 6: Adding a missing condition for CONFIG_SIXTEENTH_SUBPEL_UV in vp8/common/x86/x86_systemdependent.c Patch 7: Cleaning up various debug messages. Patch 8: Merge conflict Change-Id: I5b1d844457aefd7414a9e4e0e06c6ed38fd8cc04
2012-02-16 21:29:54 +04:00
// for(whichdir=0;whichdir<4;whichdir++)
// {
this_mv = startmv;
Supporting high precision 1/8-pel motion vectors This is the initial patch for supporting 1/8th pel motion. Currently if we configure with enable-high-precision-mv, all motion vectors would default to 1/8 pel. Encode and decode syncs fine with the current code. In the next phase the code will be refactored so that we can choose the 1/8 pel mode adaptively at a frame/segment/mb level. Derf results: http://www.corp.google.com/~debargha/vp8_results/enhinterp_hpmv.html (about 0.83% better than 8-tap interpoaltion) Patch 3: Rebased. Also adding 1/16th pel interpolation for U and V Patch 4: HD results. http://www.corp.google.com/~debargha/vp8_results/enhinterp_hd_hpmv.html Seems impressive (unless I am doing something wrong). Patch 5: Added mmx/sse for bilateral filtering, as well as enforced use of c-versions of subpel filters with 8-taps and 1/16th pel; Also redesigned the 8-tap filters to reduce the cut-off in order to introduce a denoising effect. There is a new configure option sixteenth-subpel-uv which will use 1/16 th pel interpolation for uv, if the motion vectors have 1/8 pel accuracy. With the fixes the results are promising on the derf set. The enhanced interpolation option with 8-taps alone gives 3% improvement over thei derf set: http://www.corp.google.com/~debargha/vp8_results/enhinterpn.html Results on high precision mv and on the hd set are to follow. Patch 6: Adding a missing condition for CONFIG_SIXTEENTH_SUBPEL_UV in vp8/common/x86/x86_systemdependent.c Patch 7: Cleaning up various debug messages. Patch 8: Merge conflict Change-Id: I5b1d844457aefd7414a9e4e0e06c6ed38fd8cc04
2012-02-16 21:29:54 +04:00
switch (whichdir) {
Supporting high precision 1/8-pel motion vectors This is the initial patch for supporting 1/8th pel motion. Currently if we configure with enable-high-precision-mv, all motion vectors would default to 1/8 pel. Encode and decode syncs fine with the current code. In the next phase the code will be refactored so that we can choose the 1/8 pel mode adaptively at a frame/segment/mb level. Derf results: http://www.corp.google.com/~debargha/vp8_results/enhinterp_hpmv.html (about 0.83% better than 8-tap interpoaltion) Patch 3: Rebased. Also adding 1/16th pel interpolation for U and V Patch 4: HD results. http://www.corp.google.com/~debargha/vp8_results/enhinterp_hd_hpmv.html Seems impressive (unless I am doing something wrong). Patch 5: Added mmx/sse for bilateral filtering, as well as enforced use of c-versions of subpel filters with 8-taps and 1/16th pel; Also redesigned the 8-tap filters to reduce the cut-off in order to introduce a denoising effect. There is a new configure option sixteenth-subpel-uv which will use 1/16 th pel interpolation for uv, if the motion vectors have 1/8 pel accuracy. With the fixes the results are promising on the derf set. The enhanced interpolation option with 8-taps alone gives 3% improvement over thei derf set: http://www.corp.google.com/~debargha/vp8_results/enhinterpn.html Results on high precision mv and on the hd set are to follow. Patch 6: Adding a missing condition for CONFIG_SIXTEENTH_SUBPEL_UV in vp8/common/x86/x86_systemdependent.c Patch 7: Cleaning up various debug messages. Patch 8: Merge conflict Change-Id: I5b1d844457aefd7414a9e4e0e06c6ed38fd8cc04
2012-02-16 21:29:54 +04:00
case 0:
if (startmv.as_mv.row & 7) {
this_mv.as_mv.row -= 1;
Supporting high precision 1/8-pel motion vectors This is the initial patch for supporting 1/8th pel motion. Currently if we configure with enable-high-precision-mv, all motion vectors would default to 1/8 pel. Encode and decode syncs fine with the current code. In the next phase the code will be refactored so that we can choose the 1/8 pel mode adaptively at a frame/segment/mb level. Derf results: http://www.corp.google.com/~debargha/vp8_results/enhinterp_hpmv.html (about 0.83% better than 8-tap interpoaltion) Patch 3: Rebased. Also adding 1/16th pel interpolation for U and V Patch 4: HD results. http://www.corp.google.com/~debargha/vp8_results/enhinterp_hd_hpmv.html Seems impressive (unless I am doing something wrong). Patch 5: Added mmx/sse for bilateral filtering, as well as enforced use of c-versions of subpel filters with 8-taps and 1/16th pel; Also redesigned the 8-tap filters to reduce the cut-off in order to introduce a denoising effect. There is a new configure option sixteenth-subpel-uv which will use 1/16 th pel interpolation for uv, if the motion vectors have 1/8 pel accuracy. With the fixes the results are promising on the derf set. The enhanced interpolation option with 8-taps alone gives 3% improvement over thei derf set: http://www.corp.google.com/~debargha/vp8_results/enhinterpn.html Results on high precision mv and on the hd set are to follow. Patch 6: Adding a missing condition for CONFIG_SIXTEENTH_SUBPEL_UV in vp8/common/x86/x86_systemdependent.c Patch 7: Cleaning up various debug messages. Patch 8: Merge conflict Change-Id: I5b1d844457aefd7414a9e4e0e06c6ed38fd8cc04
2012-02-16 21:29:54 +04:00
if (startmv.as_mv.col & 7) {
this_mv.as_mv.col -= 1;
thismse = vfp->svf(y, y_stride, SP(this_mv.as_mv.col), SP(this_mv.as_mv.row), z, b->src_stride, &sse);
} else {
this_mv.as_mv.col = (startmv.as_mv.col - 8) | 7;
thismse = vfp->svf(y - 1, y_stride, SP(7), SP(this_mv.as_mv.row), z, b->src_stride, &sse);;
Supporting high precision 1/8-pel motion vectors This is the initial patch for supporting 1/8th pel motion. Currently if we configure with enable-high-precision-mv, all motion vectors would default to 1/8 pel. Encode and decode syncs fine with the current code. In the next phase the code will be refactored so that we can choose the 1/8 pel mode adaptively at a frame/segment/mb level. Derf results: http://www.corp.google.com/~debargha/vp8_results/enhinterp_hpmv.html (about 0.83% better than 8-tap interpoaltion) Patch 3: Rebased. Also adding 1/16th pel interpolation for U and V Patch 4: HD results. http://www.corp.google.com/~debargha/vp8_results/enhinterp_hd_hpmv.html Seems impressive (unless I am doing something wrong). Patch 5: Added mmx/sse for bilateral filtering, as well as enforced use of c-versions of subpel filters with 8-taps and 1/16th pel; Also redesigned the 8-tap filters to reduce the cut-off in order to introduce a denoising effect. There is a new configure option sixteenth-subpel-uv which will use 1/16 th pel interpolation for uv, if the motion vectors have 1/8 pel accuracy. With the fixes the results are promising on the derf set. The enhanced interpolation option with 8-taps alone gives 3% improvement over thei derf set: http://www.corp.google.com/~debargha/vp8_results/enhinterpn.html Results on high precision mv and on the hd set are to follow. Patch 6: Adding a missing condition for CONFIG_SIXTEENTH_SUBPEL_UV in vp8/common/x86/x86_systemdependent.c Patch 7: Cleaning up various debug messages. Patch 8: Merge conflict Change-Id: I5b1d844457aefd7414a9e4e0e06c6ed38fd8cc04
2012-02-16 21:29:54 +04:00
}
} else {
this_mv.as_mv.row = (startmv.as_mv.row - 8) | 7;
if (startmv.as_mv.col & 7) {
this_mv.as_mv.col -= 1;
thismse = vfp->svf(y - y_stride, y_stride, SP(this_mv.as_mv.col), SP(7), z, b->src_stride, &sse);
} else {
this_mv.as_mv.col = (startmv.as_mv.col - 8) | 7;
thismse = vfp->svf(y - y_stride - 1, y_stride, SP(7), SP(7), z, b->src_stride, &sse);
Supporting high precision 1/8-pel motion vectors This is the initial patch for supporting 1/8th pel motion. Currently if we configure with enable-high-precision-mv, all motion vectors would default to 1/8 pel. Encode and decode syncs fine with the current code. In the next phase the code will be refactored so that we can choose the 1/8 pel mode adaptively at a frame/segment/mb level. Derf results: http://www.corp.google.com/~debargha/vp8_results/enhinterp_hpmv.html (about 0.83% better than 8-tap interpoaltion) Patch 3: Rebased. Also adding 1/16th pel interpolation for U and V Patch 4: HD results. http://www.corp.google.com/~debargha/vp8_results/enhinterp_hd_hpmv.html Seems impressive (unless I am doing something wrong). Patch 5: Added mmx/sse for bilateral filtering, as well as enforced use of c-versions of subpel filters with 8-taps and 1/16th pel; Also redesigned the 8-tap filters to reduce the cut-off in order to introduce a denoising effect. There is a new configure option sixteenth-subpel-uv which will use 1/16 th pel interpolation for uv, if the motion vectors have 1/8 pel accuracy. With the fixes the results are promising on the derf set. The enhanced interpolation option with 8-taps alone gives 3% improvement over thei derf set: http://www.corp.google.com/~debargha/vp8_results/enhinterpn.html Results on high precision mv and on the hd set are to follow. Patch 6: Adding a missing condition for CONFIG_SIXTEENTH_SUBPEL_UV in vp8/common/x86/x86_systemdependent.c Patch 7: Cleaning up various debug messages. Patch 8: Merge conflict Change-Id: I5b1d844457aefd7414a9e4e0e06c6ed38fd8cc04
2012-02-16 21:29:54 +04:00
}
}
Supporting high precision 1/8-pel motion vectors This is the initial patch for supporting 1/8th pel motion. Currently if we configure with enable-high-precision-mv, all motion vectors would default to 1/8 pel. Encode and decode syncs fine with the current code. In the next phase the code will be refactored so that we can choose the 1/8 pel mode adaptively at a frame/segment/mb level. Derf results: http://www.corp.google.com/~debargha/vp8_results/enhinterp_hpmv.html (about 0.83% better than 8-tap interpoaltion) Patch 3: Rebased. Also adding 1/16th pel interpolation for U and V Patch 4: HD results. http://www.corp.google.com/~debargha/vp8_results/enhinterp_hd_hpmv.html Seems impressive (unless I am doing something wrong). Patch 5: Added mmx/sse for bilateral filtering, as well as enforced use of c-versions of subpel filters with 8-taps and 1/16th pel; Also redesigned the 8-tap filters to reduce the cut-off in order to introduce a denoising effect. There is a new configure option sixteenth-subpel-uv which will use 1/16 th pel interpolation for uv, if the motion vectors have 1/8 pel accuracy. With the fixes the results are promising on the derf set. The enhanced interpolation option with 8-taps alone gives 3% improvement over thei derf set: http://www.corp.google.com/~debargha/vp8_results/enhinterpn.html Results on high precision mv and on the hd set are to follow. Patch 6: Adding a missing condition for CONFIG_SIXTEENTH_SUBPEL_UV in vp8/common/x86/x86_systemdependent.c Patch 7: Cleaning up various debug messages. Patch 8: Merge conflict Change-Id: I5b1d844457aefd7414a9e4e0e06c6ed38fd8cc04
2012-02-16 21:29:54 +04:00
break;
Supporting high precision 1/8-pel motion vectors This is the initial patch for supporting 1/8th pel motion. Currently if we configure with enable-high-precision-mv, all motion vectors would default to 1/8 pel. Encode and decode syncs fine with the current code. In the next phase the code will be refactored so that we can choose the 1/8 pel mode adaptively at a frame/segment/mb level. Derf results: http://www.corp.google.com/~debargha/vp8_results/enhinterp_hpmv.html (about 0.83% better than 8-tap interpoaltion) Patch 3: Rebased. Also adding 1/16th pel interpolation for U and V Patch 4: HD results. http://www.corp.google.com/~debargha/vp8_results/enhinterp_hd_hpmv.html Seems impressive (unless I am doing something wrong). Patch 5: Added mmx/sse for bilateral filtering, as well as enforced use of c-versions of subpel filters with 8-taps and 1/16th pel; Also redesigned the 8-tap filters to reduce the cut-off in order to introduce a denoising effect. There is a new configure option sixteenth-subpel-uv which will use 1/16 th pel interpolation for uv, if the motion vectors have 1/8 pel accuracy. With the fixes the results are promising on the derf set. The enhanced interpolation option with 8-taps alone gives 3% improvement over thei derf set: http://www.corp.google.com/~debargha/vp8_results/enhinterpn.html Results on high precision mv and on the hd set are to follow. Patch 6: Adding a missing condition for CONFIG_SIXTEENTH_SUBPEL_UV in vp8/common/x86/x86_systemdependent.c Patch 7: Cleaning up various debug messages. Patch 8: Merge conflict Change-Id: I5b1d844457aefd7414a9e4e0e06c6ed38fd8cc04
2012-02-16 21:29:54 +04:00
case 1:
this_mv.as_mv.col += 1;
Supporting high precision 1/8-pel motion vectors This is the initial patch for supporting 1/8th pel motion. Currently if we configure with enable-high-precision-mv, all motion vectors would default to 1/8 pel. Encode and decode syncs fine with the current code. In the next phase the code will be refactored so that we can choose the 1/8 pel mode adaptively at a frame/segment/mb level. Derf results: http://www.corp.google.com/~debargha/vp8_results/enhinterp_hpmv.html (about 0.83% better than 8-tap interpoaltion) Patch 3: Rebased. Also adding 1/16th pel interpolation for U and V Patch 4: HD results. http://www.corp.google.com/~debargha/vp8_results/enhinterp_hd_hpmv.html Seems impressive (unless I am doing something wrong). Patch 5: Added mmx/sse for bilateral filtering, as well as enforced use of c-versions of subpel filters with 8-taps and 1/16th pel; Also redesigned the 8-tap filters to reduce the cut-off in order to introduce a denoising effect. There is a new configure option sixteenth-subpel-uv which will use 1/16 th pel interpolation for uv, if the motion vectors have 1/8 pel accuracy. With the fixes the results are promising on the derf set. The enhanced interpolation option with 8-taps alone gives 3% improvement over thei derf set: http://www.corp.google.com/~debargha/vp8_results/enhinterpn.html Results on high precision mv and on the hd set are to follow. Patch 6: Adding a missing condition for CONFIG_SIXTEENTH_SUBPEL_UV in vp8/common/x86/x86_systemdependent.c Patch 7: Cleaning up various debug messages. Patch 8: Merge conflict Change-Id: I5b1d844457aefd7414a9e4e0e06c6ed38fd8cc04
2012-02-16 21:29:54 +04:00
if (startmv.as_mv.row & 7) {
this_mv.as_mv.row -= 1;
thismse = vfp->svf(y, y_stride, SP(this_mv.as_mv.col), SP(this_mv.as_mv.row), z, b->src_stride, &sse);
} else {
this_mv.as_mv.row = (startmv.as_mv.row - 8) | 7;
thismse = vfp->svf(y - y_stride, y_stride, SP(this_mv.as_mv.col), SP(7), z, b->src_stride, &sse);
}
Supporting high precision 1/8-pel motion vectors This is the initial patch for supporting 1/8th pel motion. Currently if we configure with enable-high-precision-mv, all motion vectors would default to 1/8 pel. Encode and decode syncs fine with the current code. In the next phase the code will be refactored so that we can choose the 1/8 pel mode adaptively at a frame/segment/mb level. Derf results: http://www.corp.google.com/~debargha/vp8_results/enhinterp_hpmv.html (about 0.83% better than 8-tap interpoaltion) Patch 3: Rebased. Also adding 1/16th pel interpolation for U and V Patch 4: HD results. http://www.corp.google.com/~debargha/vp8_results/enhinterp_hd_hpmv.html Seems impressive (unless I am doing something wrong). Patch 5: Added mmx/sse for bilateral filtering, as well as enforced use of c-versions of subpel filters with 8-taps and 1/16th pel; Also redesigned the 8-tap filters to reduce the cut-off in order to introduce a denoising effect. There is a new configure option sixteenth-subpel-uv which will use 1/16 th pel interpolation for uv, if the motion vectors have 1/8 pel accuracy. With the fixes the results are promising on the derf set. The enhanced interpolation option with 8-taps alone gives 3% improvement over thei derf set: http://www.corp.google.com/~debargha/vp8_results/enhinterpn.html Results on high precision mv and on the hd set are to follow. Patch 6: Adding a missing condition for CONFIG_SIXTEENTH_SUBPEL_UV in vp8/common/x86/x86_systemdependent.c Patch 7: Cleaning up various debug messages. Patch 8: Merge conflict Change-Id: I5b1d844457aefd7414a9e4e0e06c6ed38fd8cc04
2012-02-16 21:29:54 +04:00
break;
Supporting high precision 1/8-pel motion vectors This is the initial patch for supporting 1/8th pel motion. Currently if we configure with enable-high-precision-mv, all motion vectors would default to 1/8 pel. Encode and decode syncs fine with the current code. In the next phase the code will be refactored so that we can choose the 1/8 pel mode adaptively at a frame/segment/mb level. Derf results: http://www.corp.google.com/~debargha/vp8_results/enhinterp_hpmv.html (about 0.83% better than 8-tap interpoaltion) Patch 3: Rebased. Also adding 1/16th pel interpolation for U and V Patch 4: HD results. http://www.corp.google.com/~debargha/vp8_results/enhinterp_hd_hpmv.html Seems impressive (unless I am doing something wrong). Patch 5: Added mmx/sse for bilateral filtering, as well as enforced use of c-versions of subpel filters with 8-taps and 1/16th pel; Also redesigned the 8-tap filters to reduce the cut-off in order to introduce a denoising effect. There is a new configure option sixteenth-subpel-uv which will use 1/16 th pel interpolation for uv, if the motion vectors have 1/8 pel accuracy. With the fixes the results are promising on the derf set. The enhanced interpolation option with 8-taps alone gives 3% improvement over thei derf set: http://www.corp.google.com/~debargha/vp8_results/enhinterpn.html Results on high precision mv and on the hd set are to follow. Patch 6: Adding a missing condition for CONFIG_SIXTEENTH_SUBPEL_UV in vp8/common/x86/x86_systemdependent.c Patch 7: Cleaning up various debug messages. Patch 8: Merge conflict Change-Id: I5b1d844457aefd7414a9e4e0e06c6ed38fd8cc04
2012-02-16 21:29:54 +04:00
case 2:
this_mv.as_mv.row += 1;
Supporting high precision 1/8-pel motion vectors This is the initial patch for supporting 1/8th pel motion. Currently if we configure with enable-high-precision-mv, all motion vectors would default to 1/8 pel. Encode and decode syncs fine with the current code. In the next phase the code will be refactored so that we can choose the 1/8 pel mode adaptively at a frame/segment/mb level. Derf results: http://www.corp.google.com/~debargha/vp8_results/enhinterp_hpmv.html (about 0.83% better than 8-tap interpoaltion) Patch 3: Rebased. Also adding 1/16th pel interpolation for U and V Patch 4: HD results. http://www.corp.google.com/~debargha/vp8_results/enhinterp_hd_hpmv.html Seems impressive (unless I am doing something wrong). Patch 5: Added mmx/sse for bilateral filtering, as well as enforced use of c-versions of subpel filters with 8-taps and 1/16th pel; Also redesigned the 8-tap filters to reduce the cut-off in order to introduce a denoising effect. There is a new configure option sixteenth-subpel-uv which will use 1/16 th pel interpolation for uv, if the motion vectors have 1/8 pel accuracy. With the fixes the results are promising on the derf set. The enhanced interpolation option with 8-taps alone gives 3% improvement over thei derf set: http://www.corp.google.com/~debargha/vp8_results/enhinterpn.html Results on high precision mv and on the hd set are to follow. Patch 6: Adding a missing condition for CONFIG_SIXTEENTH_SUBPEL_UV in vp8/common/x86/x86_systemdependent.c Patch 7: Cleaning up various debug messages. Patch 8: Merge conflict Change-Id: I5b1d844457aefd7414a9e4e0e06c6ed38fd8cc04
2012-02-16 21:29:54 +04:00
if (startmv.as_mv.col & 7) {
this_mv.as_mv.col -= 1;
thismse = vfp->svf(y, y_stride, SP(this_mv.as_mv.col), SP(this_mv.as_mv.row), z, b->src_stride, &sse);
} else {
this_mv.as_mv.col = (startmv.as_mv.col - 8) | 7;
thismse = vfp->svf(y - 1, y_stride, SP(7), SP(this_mv.as_mv.row), z, b->src_stride, &sse);
}
Supporting high precision 1/8-pel motion vectors This is the initial patch for supporting 1/8th pel motion. Currently if we configure with enable-high-precision-mv, all motion vectors would default to 1/8 pel. Encode and decode syncs fine with the current code. In the next phase the code will be refactored so that we can choose the 1/8 pel mode adaptively at a frame/segment/mb level. Derf results: http://www.corp.google.com/~debargha/vp8_results/enhinterp_hpmv.html (about 0.83% better than 8-tap interpoaltion) Patch 3: Rebased. Also adding 1/16th pel interpolation for U and V Patch 4: HD results. http://www.corp.google.com/~debargha/vp8_results/enhinterp_hd_hpmv.html Seems impressive (unless I am doing something wrong). Patch 5: Added mmx/sse for bilateral filtering, as well as enforced use of c-versions of subpel filters with 8-taps and 1/16th pel; Also redesigned the 8-tap filters to reduce the cut-off in order to introduce a denoising effect. There is a new configure option sixteenth-subpel-uv which will use 1/16 th pel interpolation for uv, if the motion vectors have 1/8 pel accuracy. With the fixes the results are promising on the derf set. The enhanced interpolation option with 8-taps alone gives 3% improvement over thei derf set: http://www.corp.google.com/~debargha/vp8_results/enhinterpn.html Results on high precision mv and on the hd set are to follow. Patch 6: Adding a missing condition for CONFIG_SIXTEENTH_SUBPEL_UV in vp8/common/x86/x86_systemdependent.c Patch 7: Cleaning up various debug messages. Patch 8: Merge conflict Change-Id: I5b1d844457aefd7414a9e4e0e06c6ed38fd8cc04
2012-02-16 21:29:54 +04:00
break;
Supporting high precision 1/8-pel motion vectors This is the initial patch for supporting 1/8th pel motion. Currently if we configure with enable-high-precision-mv, all motion vectors would default to 1/8 pel. Encode and decode syncs fine with the current code. In the next phase the code will be refactored so that we can choose the 1/8 pel mode adaptively at a frame/segment/mb level. Derf results: http://www.corp.google.com/~debargha/vp8_results/enhinterp_hpmv.html (about 0.83% better than 8-tap interpoaltion) Patch 3: Rebased. Also adding 1/16th pel interpolation for U and V Patch 4: HD results. http://www.corp.google.com/~debargha/vp8_results/enhinterp_hd_hpmv.html Seems impressive (unless I am doing something wrong). Patch 5: Added mmx/sse for bilateral filtering, as well as enforced use of c-versions of subpel filters with 8-taps and 1/16th pel; Also redesigned the 8-tap filters to reduce the cut-off in order to introduce a denoising effect. There is a new configure option sixteenth-subpel-uv which will use 1/16 th pel interpolation for uv, if the motion vectors have 1/8 pel accuracy. With the fixes the results are promising on the derf set. The enhanced interpolation option with 8-taps alone gives 3% improvement over thei derf set: http://www.corp.google.com/~debargha/vp8_results/enhinterpn.html Results on high precision mv and on the hd set are to follow. Patch 6: Adding a missing condition for CONFIG_SIXTEENTH_SUBPEL_UV in vp8/common/x86/x86_systemdependent.c Patch 7: Cleaning up various debug messages. Patch 8: Merge conflict Change-Id: I5b1d844457aefd7414a9e4e0e06c6ed38fd8cc04
2012-02-16 21:29:54 +04:00
case 3:
this_mv.as_mv.col += 1;
this_mv.as_mv.row += 1;
thismse = vfp->svf(y, y_stride, SP(this_mv.as_mv.col), SP(this_mv.as_mv.row), z, b->src_stride, &sse);
break;
}
Supporting high precision 1/8-pel motion vectors This is the initial patch for supporting 1/8th pel motion. Currently if we configure with enable-high-precision-mv, all motion vectors would default to 1/8 pel. Encode and decode syncs fine with the current code. In the next phase the code will be refactored so that we can choose the 1/8 pel mode adaptively at a frame/segment/mb level. Derf results: http://www.corp.google.com/~debargha/vp8_results/enhinterp_hpmv.html (about 0.83% better than 8-tap interpoaltion) Patch 3: Rebased. Also adding 1/16th pel interpolation for U and V Patch 4: HD results. http://www.corp.google.com/~debargha/vp8_results/enhinterp_hd_hpmv.html Seems impressive (unless I am doing something wrong). Patch 5: Added mmx/sse for bilateral filtering, as well as enforced use of c-versions of subpel filters with 8-taps and 1/16th pel; Also redesigned the 8-tap filters to reduce the cut-off in order to introduce a denoising effect. There is a new configure option sixteenth-subpel-uv which will use 1/16 th pel interpolation for uv, if the motion vectors have 1/8 pel accuracy. With the fixes the results are promising on the derf set. The enhanced interpolation option with 8-taps alone gives 3% improvement over thei derf set: http://www.corp.google.com/~debargha/vp8_results/enhinterpn.html Results on high precision mv and on the hd set are to follow. Patch 6: Adding a missing condition for CONFIG_SIXTEENTH_SUBPEL_UV in vp8/common/x86/x86_systemdependent.c Patch 7: Cleaning up various debug messages. Patch 8: Merge conflict Change-Id: I5b1d844457aefd7414a9e4e0e06c6ed38fd8cc04
2012-02-16 21:29:54 +04:00
diag = thismse + mv_err_cost(&this_mv, ref_mv, mvjcost, mvcost, error_per_bit,
xd->allow_high_precision_mv);
Supporting high precision 1/8-pel motion vectors This is the initial patch for supporting 1/8th pel motion. Currently if we configure with enable-high-precision-mv, all motion vectors would default to 1/8 pel. Encode and decode syncs fine with the current code. In the next phase the code will be refactored so that we can choose the 1/8 pel mode adaptively at a frame/segment/mb level. Derf results: http://www.corp.google.com/~debargha/vp8_results/enhinterp_hpmv.html (about 0.83% better than 8-tap interpoaltion) Patch 3: Rebased. Also adding 1/16th pel interpolation for U and V Patch 4: HD results. http://www.corp.google.com/~debargha/vp8_results/enhinterp_hd_hpmv.html Seems impressive (unless I am doing something wrong). Patch 5: Added mmx/sse for bilateral filtering, as well as enforced use of c-versions of subpel filters with 8-taps and 1/16th pel; Also redesigned the 8-tap filters to reduce the cut-off in order to introduce a denoising effect. There is a new configure option sixteenth-subpel-uv which will use 1/16 th pel interpolation for uv, if the motion vectors have 1/8 pel accuracy. With the fixes the results are promising on the derf set. The enhanced interpolation option with 8-taps alone gives 3% improvement over thei derf set: http://www.corp.google.com/~debargha/vp8_results/enhinterpn.html Results on high precision mv and on the hd set are to follow. Patch 6: Adding a missing condition for CONFIG_SIXTEENTH_SUBPEL_UV in vp8/common/x86/x86_systemdependent.c Patch 7: Cleaning up various debug messages. Patch 8: Merge conflict Change-Id: I5b1d844457aefd7414a9e4e0e06c6ed38fd8cc04
2012-02-16 21:29:54 +04:00
if (diag < bestmse) {
*bestmv = this_mv;
bestmse = diag;
*distortion = thismse;
*sse1 = sse;
}
Supporting high precision 1/8-pel motion vectors This is the initial patch for supporting 1/8th pel motion. Currently if we configure with enable-high-precision-mv, all motion vectors would default to 1/8 pel. Encode and decode syncs fine with the current code. In the next phase the code will be refactored so that we can choose the 1/8 pel mode adaptively at a frame/segment/mb level. Derf results: http://www.corp.google.com/~debargha/vp8_results/enhinterp_hpmv.html (about 0.83% better than 8-tap interpoaltion) Patch 3: Rebased. Also adding 1/16th pel interpolation for U and V Patch 4: HD results. http://www.corp.google.com/~debargha/vp8_results/enhinterp_hd_hpmv.html Seems impressive (unless I am doing something wrong). Patch 5: Added mmx/sse for bilateral filtering, as well as enforced use of c-versions of subpel filters with 8-taps and 1/16th pel; Also redesigned the 8-tap filters to reduce the cut-off in order to introduce a denoising effect. There is a new configure option sixteenth-subpel-uv which will use 1/16 th pel interpolation for uv, if the motion vectors have 1/8 pel accuracy. With the fixes the results are promising on the derf set. The enhanced interpolation option with 8-taps alone gives 3% improvement over thei derf set: http://www.corp.google.com/~debargha/vp8_results/enhinterpn.html Results on high precision mv and on the hd set are to follow. Patch 6: Adding a missing condition for CONFIG_SIXTEENTH_SUBPEL_UV in vp8/common/x86/x86_systemdependent.c Patch 7: Cleaning up various debug messages. Patch 8: Merge conflict Change-Id: I5b1d844457aefd7414a9e4e0e06c6ed38fd8cc04
2012-02-16 21:29:54 +04:00
return bestmse;
2010-05-18 19:58:33 +04:00
}
Supporting high precision 1/8-pel motion vectors This is the initial patch for supporting 1/8th pel motion. Currently if we configure with enable-high-precision-mv, all motion vectors would default to 1/8 pel. Encode and decode syncs fine with the current code. In the next phase the code will be refactored so that we can choose the 1/8 pel mode adaptively at a frame/segment/mb level. Derf results: http://www.corp.google.com/~debargha/vp8_results/enhinterp_hpmv.html (about 0.83% better than 8-tap interpoaltion) Patch 3: Rebased. Also adding 1/16th pel interpolation for U and V Patch 4: HD results. http://www.corp.google.com/~debargha/vp8_results/enhinterp_hd_hpmv.html Seems impressive (unless I am doing something wrong). Patch 5: Added mmx/sse for bilateral filtering, as well as enforced use of c-versions of subpel filters with 8-taps and 1/16th pel; Also redesigned the 8-tap filters to reduce the cut-off in order to introduce a denoising effect. There is a new configure option sixteenth-subpel-uv which will use 1/16 th pel interpolation for uv, if the motion vectors have 1/8 pel accuracy. With the fixes the results are promising on the derf set. The enhanced interpolation option with 8-taps alone gives 3% improvement over thei derf set: http://www.corp.google.com/~debargha/vp8_results/enhinterpn.html Results on high precision mv and on the hd set are to follow. Patch 6: Adding a missing condition for CONFIG_SIXTEENTH_SUBPEL_UV in vp8/common/x86/x86_systemdependent.c Patch 7: Cleaning up various debug messages. Patch 8: Merge conflict Change-Id: I5b1d844457aefd7414a9e4e0e06c6ed38fd8cc04
2012-02-16 21:29:54 +04:00
#undef SP
int vp9_find_best_half_pixel_step(MACROBLOCK *x, BLOCK *b, BLOCKD *d,
int_mv *bestmv, int_mv *ref_mv,
int error_per_bit,
const vp9_variance_fn_ptr_t *vfp,
int *mvjcost, int *mvcost[2],
int *distortion,
unsigned int *sse1) {
int bestmse = INT_MAX;
int_mv startmv;
int_mv this_mv;
uint8_t *z = (*(b->base_src) + b->src);
int left, right, up, down, diag;
unsigned int sse;
int whichdir;
int thismse;
int y_stride;
MACROBLOCKD *xd = &x->e_mbd;
uint8_t *y = *(d->base_pre) + d->pre +
(bestmv->as_mv.row) * d->pre_stride + bestmv->as_mv.col;
y_stride = d->pre_stride;
2010-05-18 19:58:33 +04:00
// central mv
bestmv->as_mv.row <<= 3;
bestmv->as_mv.col <<= 3;
startmv = *bestmv;
2010-05-18 19:58:33 +04:00
// calculate central point error
bestmse = vfp->vf(y, y_stride, z, b->src_stride, sse1);
*distortion = bestmse;
bestmse += mv_err_cost(bestmv, ref_mv, mvjcost, mvcost, error_per_bit,
xd->allow_high_precision_mv);
2010-05-18 19:58:33 +04:00
// go left then right and check error
this_mv.as_mv.row = startmv.as_mv.row;
this_mv.as_mv.col = ((startmv.as_mv.col - 8) | 4);
thismse = vfp->svf_halfpix_h(y - 1, y_stride, z, b->src_stride, &sse);
left = thismse + mv_err_cost(&this_mv, ref_mv, mvjcost, mvcost, error_per_bit,
xd->allow_high_precision_mv);
2010-05-18 19:58:33 +04:00
if (left < bestmse) {
*bestmv = this_mv;
bestmse = left;
*distortion = thismse;
*sse1 = sse;
}
2010-05-18 19:58:33 +04:00
this_mv.as_mv.col += 8;
thismse = vfp->svf_halfpix_h(y, y_stride, z, b->src_stride, &sse);
right = thismse + mv_err_cost(&this_mv, ref_mv, mvjcost, mvcost,
error_per_bit, xd->allow_high_precision_mv);
2010-05-18 19:58:33 +04:00
if (right < bestmse) {
*bestmv = this_mv;
bestmse = right;
*distortion = thismse;
*sse1 = sse;
}
// go up then down and check error
this_mv.as_mv.col = startmv.as_mv.col;
this_mv.as_mv.row = ((startmv.as_mv.row - 8) | 4);
thismse = vfp->svf_halfpix_v(y - y_stride, y_stride, z, b->src_stride, &sse);
up = thismse + mv_err_cost(&this_mv, ref_mv, mvjcost, mvcost, error_per_bit,
xd->allow_high_precision_mv);
2010-05-18 19:58:33 +04:00
if (up < bestmse) {
*bestmv = this_mv;
bestmse = up;
*distortion = thismse;
*sse1 = sse;
}
2010-05-18 19:58:33 +04:00
this_mv.as_mv.row += 8;
thismse = vfp->svf_halfpix_v(y, y_stride, z, b->src_stride, &sse);
down = thismse + mv_err_cost(&this_mv, ref_mv, mvjcost, mvcost, error_per_bit,
xd->allow_high_precision_mv);
2010-05-18 19:58:33 +04:00
if (down < bestmse) {
*bestmv = this_mv;
bestmse = down;
*distortion = thismse;
*sse1 = sse;
}
2010-05-18 19:58:33 +04:00
// now check 1 more diagonal -
whichdir = (left < right ? 0 : 1) + (up < down ? 0 : 2);
this_mv = startmv;
2010-05-18 19:58:33 +04:00
switch (whichdir) {
2010-05-18 19:58:33 +04:00
case 0:
this_mv.as_mv.col = (this_mv.as_mv.col - 8) | 4;
this_mv.as_mv.row = (this_mv.as_mv.row - 8) | 4;
thismse = vfp->svf_halfpix_hv(y - 1 - y_stride, y_stride, z, b->src_stride, &sse);
break;
2010-05-18 19:58:33 +04:00
case 1:
this_mv.as_mv.col += 4;
this_mv.as_mv.row = (this_mv.as_mv.row - 8) | 4;
thismse = vfp->svf_halfpix_hv(y - y_stride, y_stride, z, b->src_stride, &sse);
break;
2010-05-18 19:58:33 +04:00
case 2:
this_mv.as_mv.col = (this_mv.as_mv.col - 8) | 4;
this_mv.as_mv.row += 4;
thismse = vfp->svf_halfpix_hv(y - 1, y_stride, z, b->src_stride, &sse);
break;
2010-05-18 19:58:33 +04:00
case 3:
default:
this_mv.as_mv.col += 4;
this_mv.as_mv.row += 4;
thismse = vfp->svf_halfpix_hv(y, y_stride, z, b->src_stride, &sse);
break;
}
2010-05-18 19:58:33 +04:00
diag = thismse + mv_err_cost(&this_mv, ref_mv, mvjcost, mvcost, error_per_bit,
xd->allow_high_precision_mv);
2010-05-18 19:58:33 +04:00
if (diag < bestmse) {
*bestmv = this_mv;
bestmse = diag;
*distortion = thismse;
*sse1 = sse;
}
2010-05-18 19:58:33 +04:00
return bestmse;
2010-05-18 19:58:33 +04:00
}
#define CHECK_BOUNDS(range) \
{\
all_in = 1;\
all_in &= ((br-range) >= x->mv_row_min);\
all_in &= ((br+range) <= x->mv_row_max);\
all_in &= ((bc-range) >= x->mv_col_min);\
all_in &= ((bc+range) <= x->mv_col_max);\
}
#define CHECK_POINT \
{\
if (this_mv.as_mv.col < x->mv_col_min) continue;\
if (this_mv.as_mv.col > x->mv_col_max) continue;\
if (this_mv.as_mv.row < x->mv_row_min) continue;\
if (this_mv.as_mv.row > x->mv_row_max) continue;\
}
#define CHECK_BETTER \
{\
if (thissad < bestsad)\
{\
thissad += mvsad_err_cost(&this_mv, &fcenter_mv, mvjsadcost, mvsadcost, \
sad_per_bit);\
if (thissad < bestsad)\
{\
bestsad = thissad;\
best_site = i;\
}\
}\
}
static const MV next_chkpts[6][3] = {
{{ -2, 0}, { -1, -2}, {1, -2}},
{{ -1, -2}, {1, -2}, {2, 0}},
{{1, -2}, {2, 0}, {1, 2}},
{{2, 0}, {1, 2}, { -1, 2}},
{{1, 2}, { -1, 2}, { -2, 0}},
{{ -1, 2}, { -2, 0}, { -1, -2}}
};
int vp9_hex_search
2010-05-18 19:58:33 +04:00
(
MACROBLOCK *x,
BLOCK *b,
BLOCKD *d,
int_mv *ref_mv,
int_mv *best_mv,
int search_param,
int sad_per_bit,
const vp9_variance_fn_ptr_t *vfp,
int *mvjsadcost, int *mvsadcost[2],
int *mvjcost, int *mvcost[2],
int_mv *center_mv
) {
MV hex[6] = { { -1, -2}, {1, -2}, {2, 0}, {1, 2}, { -1, 2}, { -2, 0} };
MV neighbors[4] = {{0, -1}, { -1, 0}, {1, 0}, {0, 1}};
int i, j;
uint8_t *what = (*(b->base_src) + b->src);
int what_stride = b->src_stride;
int in_what_stride = d->pre_stride;
int br, bc;
int_mv this_mv;
unsigned int bestsad = 0x7fffffff;
unsigned int thissad;
uint8_t *base_offset;
uint8_t *this_offset;
int k = -1;
int all_in;
int best_site = -1;
int_mv fcenter_mv;
fcenter_mv.as_mv.row = center_mv->as_mv.row >> 3;
fcenter_mv.as_mv.col = center_mv->as_mv.col >> 3;
// adjust ref_mv to make sure it is within MV range
clamp_mv(ref_mv, x->mv_col_min, x->mv_col_max, x->mv_row_min, x->mv_row_max);
br = ref_mv->as_mv.row;
bc = ref_mv->as_mv.col;
// Work out the start point for the search
base_offset = (uint8_t *)(*(d->base_pre) + d->pre);
this_offset = base_offset + (br * (d->pre_stride)) + bc;
this_mv.as_mv.row = br;
this_mv.as_mv.col = bc;
bestsad = vfp->sdf(what, what_stride, this_offset,
in_what_stride, 0x7fffffff)
+ mvsad_err_cost(&this_mv, &fcenter_mv, mvjsadcost, mvsadcost,
sad_per_bit);
2010-05-18 19:58:33 +04:00
// hex search
// j=0
CHECK_BOUNDS(2)
if (all_in) {
for (i = 0; i < 6; i++) {
this_mv.as_mv.row = br + hex[i].row;
this_mv.as_mv.col = bc + hex[i].col;
this_offset = base_offset + (this_mv.as_mv.row * in_what_stride) + this_mv.as_mv.col;
thissad = vfp->sdf(what, what_stride, this_offset, in_what_stride, bestsad);
CHECK_BETTER
}
} else {
for (i = 0; i < 6; i++) {
this_mv.as_mv.row = br + hex[i].row;
this_mv.as_mv.col = bc + hex[i].col;
CHECK_POINT
this_offset = base_offset + (this_mv.as_mv.row * in_what_stride) + this_mv.as_mv.col;
thissad = vfp->sdf(what, what_stride, this_offset, in_what_stride, bestsad);
CHECK_BETTER
}
}
if (best_site == -1)
goto cal_neighbors;
else {
br += hex[best_site].row;
bc += hex[best_site].col;
k = best_site;
}
for (j = 1; j < 127; j++) {
best_site = -1;
CHECK_BOUNDS(2)
if (all_in) {
for (i = 0; i < 3; i++) {
this_mv.as_mv.row = br + next_chkpts[k][i].row;
this_mv.as_mv.col = bc + next_chkpts[k][i].col;
this_offset = base_offset + (this_mv.as_mv.row * (in_what_stride)) + this_mv.as_mv.col;
thissad = vfp->sdf(what, what_stride, this_offset, in_what_stride, bestsad);
CHECK_BETTER
}
} else {
for (i = 0; i < 3; i++) {
this_mv.as_mv.row = br + next_chkpts[k][i].row;
this_mv.as_mv.col = bc + next_chkpts[k][i].col;
CHECK_POINT
this_offset = base_offset + (this_mv.as_mv.row * (in_what_stride)) + this_mv.as_mv.col;
thissad = vfp->sdf(what, what_stride, this_offset, in_what_stride, bestsad);
CHECK_BETTER
}
}
if (best_site == -1)
break;
else {
br += next_chkpts[k][best_site].row;
bc += next_chkpts[k][best_site].col;
k += 5 + best_site;
if (k >= 12) k -= 12;
else if (k >= 6) k -= 6;
}
}
// check 4 1-away neighbors
cal_neighbors:
for (j = 0; j < 32; j++) {
best_site = -1;
CHECK_BOUNDS(1)
if (all_in) {
for (i = 0; i < 4; i++) {
this_mv.as_mv.row = br + neighbors[i].row;
this_mv.as_mv.col = bc + neighbors[i].col;
this_offset = base_offset + (this_mv.as_mv.row * (in_what_stride)) + this_mv.as_mv.col;
thissad = vfp->sdf(what, what_stride, this_offset, in_what_stride, bestsad);
CHECK_BETTER
}
} else {
for (i = 0; i < 4; i++) {
this_mv.as_mv.row = br + neighbors[i].row;
this_mv.as_mv.col = bc + neighbors[i].col;
CHECK_POINT
this_offset = base_offset + (this_mv.as_mv.row * (in_what_stride)) + this_mv.as_mv.col;
thissad = vfp->sdf(what, what_stride, this_offset, in_what_stride, bestsad);
CHECK_BETTER
}
}
if (best_site == -1)
break;
else {
br += neighbors[best_site].row;
bc += neighbors[best_site].col;
2010-05-18 19:58:33 +04:00
}
}
2010-05-18 19:58:33 +04:00
best_mv->as_mv.row = br;
best_mv->as_mv.col = bc;
2010-05-18 19:58:33 +04:00
return bestsad;
2010-05-18 19:58:33 +04:00
}
#undef CHECK_BOUNDS
#undef CHECK_POINT
2010-05-18 19:58:33 +04:00
#undef CHECK_BETTER
int vp9_diamond_search_sad_c(MACROBLOCK *x, BLOCK *b, BLOCKD *d,
int_mv *ref_mv, int_mv *best_mv,
int search_param, int sad_per_bit, int *num00,
vp9_variance_fn_ptr_t *fn_ptr, int *mvjcost,
int *mvcost[2], int_mv *center_mv) {
int i, j, step;
uint8_t *what = (*(b->base_src) + b->src);
int what_stride = b->src_stride;
uint8_t *in_what;
int in_what_stride = d->pre_stride;
uint8_t *best_address;
int tot_steps;
int_mv this_mv;
int bestsad = INT_MAX;
int best_site = 0;
int last_site = 0;
int ref_row, ref_col;
int this_row_offset, this_col_offset;
search_site *ss;
uint8_t *check_here;
int thissad;
MACROBLOCKD *xd = &x->e_mbd;
int_mv fcenter_mv;
int *mvjsadcost = x->nmvjointsadcost;
int *mvsadcost[2] = {x->nmvsadcost[0], x->nmvsadcost[1]};
fcenter_mv.as_mv.row = center_mv->as_mv.row >> 3;
fcenter_mv.as_mv.col = center_mv->as_mv.col >> 3;
clamp_mv(ref_mv, x->mv_col_min, x->mv_col_max, x->mv_row_min, x->mv_row_max);
ref_row = ref_mv->as_mv.row;
ref_col = ref_mv->as_mv.col;
*num00 = 0;
best_mv->as_mv.row = ref_row;
best_mv->as_mv.col = ref_col;
// Work out the start point for the search
in_what = (uint8_t *)(*(d->base_pre) + d->pre +
(ref_row * (d->pre_stride)) + ref_col);
best_address = in_what;
// Check the starting position
bestsad = fn_ptr->sdf(what, what_stride, in_what,
in_what_stride, 0x7fffffff)
+ mvsad_err_cost(best_mv, &fcenter_mv, mvjsadcost, mvsadcost,
sad_per_bit);
// search_param determines the length of the initial step and hence the number of iterations
// 0 = initial step (MAX_FIRST_STEP) pel : 1 = (MAX_FIRST_STEP/2) pel, 2 = (MAX_FIRST_STEP/4) pel... etc.
ss = &x->ss[search_param * x->searches_per_step];
tot_steps = (x->ss_count / x->searches_per_step) - search_param;
i = 1;
for (step = 0; step < tot_steps; step++) {
for (j = 0; j < x->searches_per_step; j++) {
// Trap illegal vectors
this_row_offset = best_mv->as_mv.row + ss[i].mv.row;
this_col_offset = best_mv->as_mv.col + ss[i].mv.col;
if ((this_col_offset > x->mv_col_min) && (this_col_offset < x->mv_col_max) &&
(this_row_offset > x->mv_row_min) && (this_row_offset < x->mv_row_max))
{
check_here = ss[i].offset + best_address;
thissad = fn_ptr->sdf(what, what_stride, check_here, in_what_stride, bestsad);
if (thissad < bestsad) {
this_mv.as_mv.row = this_row_offset;
this_mv.as_mv.col = this_col_offset;
thissad += mvsad_err_cost(&this_mv, &fcenter_mv,
mvjsadcost, mvsadcost, sad_per_bit);
if (thissad < bestsad) {
bestsad = thissad;
best_site = i;
}
2010-05-18 19:58:33 +04:00
}
}
2010-05-18 19:58:33 +04:00
i++;
2010-05-18 19:58:33 +04:00
}
if (best_site != last_site) {
best_mv->as_mv.row += ss[best_site].mv.row;
best_mv->as_mv.col += ss[best_site].mv.col;
best_address += ss[best_site].offset;
last_site = best_site;
} else if (best_address == in_what)
(*num00)++;
}
2010-05-18 19:58:33 +04:00
this_mv.as_mv.row = best_mv->as_mv.row << 3;
this_mv.as_mv.col = best_mv->as_mv.col << 3;
2010-05-18 19:58:33 +04:00
if (bestsad == INT_MAX)
return INT_MAX;
return
fn_ptr->vf(what, what_stride, best_address, in_what_stride,
(unsigned int *)(&thissad)) +
mv_err_cost(&this_mv, center_mv, mvjcost, mvcost, x->errorperbit,
xd->allow_high_precision_mv);
2010-05-18 19:58:33 +04:00
}
int vp9_diamond_search_sadx4(MACROBLOCK *x, BLOCK *b, BLOCKD *d,
int_mv *ref_mv, int_mv *best_mv, int search_param,
int sad_per_bit, int *num00,
vp9_variance_fn_ptr_t *fn_ptr,
int *mvjcost, int *mvcost[2], int_mv *center_mv) {
int i, j, step;
uint8_t *what = (*(b->base_src) + b->src);
int what_stride = b->src_stride;
uint8_t *in_what;
int in_what_stride = d->pre_stride;
uint8_t *best_address;
int tot_steps;
int_mv this_mv;
unsigned int bestsad = INT_MAX;
int best_site = 0;
int last_site = 0;
int ref_row;
int ref_col;
int this_row_offset;
int this_col_offset;
search_site *ss;
uint8_t *check_here;
unsigned int thissad;
MACROBLOCKD *xd = &x->e_mbd;
int_mv fcenter_mv;
int *mvjsadcost = x->nmvjointsadcost;
int *mvsadcost[2] = {x->nmvsadcost[0], x->nmvsadcost[1]};
fcenter_mv.as_mv.row = center_mv->as_mv.row >> 3;
fcenter_mv.as_mv.col = center_mv->as_mv.col >> 3;
clamp_mv(ref_mv, x->mv_col_min, x->mv_col_max, x->mv_row_min, x->mv_row_max);
ref_row = ref_mv->as_mv.row;
ref_col = ref_mv->as_mv.col;
*num00 = 0;
best_mv->as_mv.row = ref_row;
best_mv->as_mv.col = ref_col;
// Work out the start point for the search
in_what = (uint8_t *)(*(d->base_pre) + d->pre +
(ref_row * (d->pre_stride)) + ref_col);
best_address = in_what;
// Check the starting position
bestsad = fn_ptr->sdf(what, what_stride,
in_what, in_what_stride, 0x7fffffff)
+ mvsad_err_cost(best_mv, &fcenter_mv, mvjsadcost, mvsadcost,
sad_per_bit);
// search_param determines the length of the initial step and hence the number of iterations
// 0 = initial step (MAX_FIRST_STEP) pel : 1 = (MAX_FIRST_STEP/2) pel, 2 = (MAX_FIRST_STEP/4) pel... etc.
ss = &x->ss[search_param * x->searches_per_step];
tot_steps = (x->ss_count / x->searches_per_step) - search_param;
i = 1;
for (step = 0; step < tot_steps; step++) {
int all_in = 1, t;
// To know if all neighbor points are within the bounds, 4 bounds checking are enough instead of
// checking 4 bounds for each points.
all_in &= ((best_mv->as_mv.row + ss[i].mv.row) > x->mv_row_min);
all_in &= ((best_mv->as_mv.row + ss[i + 1].mv.row) < x->mv_row_max);
all_in &= ((best_mv->as_mv.col + ss[i + 2].mv.col) > x->mv_col_min);
all_in &= ((best_mv->as_mv.col + ss[i + 3].mv.col) < x->mv_col_max);
if (all_in) {
unsigned int sad_array[4];
for (j = 0; j < x->searches_per_step; j += 4) {
unsigned char const *block_offset[4];
for (t = 0; t < 4; t++)
block_offset[t] = ss[i + t].offset + best_address;
fn_ptr->sdx4df(what, what_stride, block_offset, in_what_stride,
sad_array);
for (t = 0; t < 4; t++, i++) {
if (sad_array[t] < bestsad) {
this_mv.as_mv.row = best_mv->as_mv.row + ss[i].mv.row;
this_mv.as_mv.col = best_mv->as_mv.col + ss[i].mv.col;
sad_array[t] += mvsad_err_cost(&this_mv, &fcenter_mv,
mvjsadcost, mvsadcost, sad_per_bit);
if (sad_array[t] < bestsad) {
bestsad = sad_array[t];
best_site = i;
2010-05-18 19:58:33 +04:00
}
}
}
}
} else {
for (j = 0; j < x->searches_per_step; j++) {
// Trap illegal vectors
this_row_offset = best_mv->as_mv.row + ss[i].mv.row;
this_col_offset = best_mv->as_mv.col + ss[i].mv.col;
if ((this_col_offset > x->mv_col_min) && (this_col_offset < x->mv_col_max) &&
(this_row_offset > x->mv_row_min) && (this_row_offset < x->mv_row_max)) {
check_here = ss[i].offset + best_address;
thissad = fn_ptr->sdf(what, what_stride, check_here, in_what_stride, bestsad);
if (thissad < bestsad) {
this_mv.as_mv.row = this_row_offset;
this_mv.as_mv.col = this_col_offset;
thissad += mvsad_err_cost(&this_mv, &fcenter_mv,
mvjsadcost, mvsadcost, sad_per_bit);
if (thissad < bestsad) {
bestsad = thissad;
best_site = i;
2010-05-18 19:58:33 +04:00
}
}
2010-05-18 19:58:33 +04:00
}
i++;
}
2010-05-18 19:58:33 +04:00
}
if (best_site != last_site) {
best_mv->as_mv.row += ss[best_site].mv.row;
best_mv->as_mv.col += ss[best_site].mv.col;
best_address += ss[best_site].offset;
last_site = best_site;
} else if (best_address == in_what)
(*num00)++;
}
2010-05-18 19:58:33 +04:00
this_mv.as_mv.row = best_mv->as_mv.row << 3;
this_mv.as_mv.col = best_mv->as_mv.col << 3;
2010-05-18 19:58:33 +04:00
if (bestsad == INT_MAX)
return INT_MAX;
return
fn_ptr->vf(what, what_stride, best_address, in_what_stride,
(unsigned int *)(&thissad)) +
mv_err_cost(&this_mv, center_mv, mvjcost, mvcost, x->errorperbit,
xd->allow_high_precision_mv);
2010-05-18 19:58:33 +04:00
}
/* do_refine: If last step (1-away) of n-step search doesn't pick the center
point as the best match, we will do a final 1-away diamond
refining search */
int vp9_full_pixel_diamond(VP9_COMP *cpi, MACROBLOCK *x, BLOCK *b,
BLOCKD *d, int_mv *mvp_full, int step_param,
int sadpb, int further_steps,
int do_refine, vp9_variance_fn_ptr_t *fn_ptr,
int_mv *ref_mv, int_mv *dst_mv) {
int_mv temp_mv;
int thissme, n, num00;
int bestsme = cpi->diamond_search_sad(x, b, d, mvp_full, &temp_mv,
step_param, sadpb, &num00,
fn_ptr, x->nmvjointcost,
x->mvcost, ref_mv);
dst_mv->as_int = temp_mv.as_int;
n = num00;
num00 = 0;
/* If there won't be more n-step search, check to see if refining search is needed. */
if (n > further_steps)
do_refine = 0;
while (n < further_steps) {
n++;
if (num00)
num00--;
else {
thissme = cpi->diamond_search_sad(x, b, d, mvp_full, &temp_mv,
step_param + n, sadpb, &num00,
fn_ptr, x->nmvjointcost, x->mvcost,
ref_mv);
/* check to see if refining search is needed. */
if (num00 > (further_steps - n))
do_refine = 0;
if (thissme < bestsme) {
bestsme = thissme;
dst_mv->as_int = temp_mv.as_int;
}
}
}
/* final 1-away diamond refining search */
if (do_refine == 1) {
int search_range = 8;
int_mv best_mv;
best_mv.as_int = dst_mv->as_int;
thissme = cpi->refining_search_sad(x, b, d, &best_mv, sadpb, search_range,
fn_ptr, x->nmvjointcost, x->mvcost,
ref_mv);
if (thissme < bestsme) {
bestsme = thissme;
dst_mv->as_int = best_mv.as_int;
}
}
return bestsme;
}
int vp9_full_search_sad_c(MACROBLOCK *x, BLOCK *b, BLOCKD *d, int_mv *ref_mv,
int sad_per_bit, int distance,
vp9_variance_fn_ptr_t *fn_ptr, int *mvjcost,
int *mvcost[2],
int_mv *center_mv) {
uint8_t *what = (*(b->base_src) + b->src);
int what_stride = b->src_stride;
uint8_t *in_what;
int in_what_stride = d->pre_stride;
int mv_stride = d->pre_stride;
uint8_t *bestaddress;
int_mv *best_mv = &d->bmi.as_mv.first;
int_mv this_mv;
int bestsad = INT_MAX;
int r, c;
uint8_t *check_here;
int thissad;
MACROBLOCKD *xd = &x->e_mbd;
int ref_row = ref_mv->as_mv.row;
int ref_col = ref_mv->as_mv.col;
int row_min = ref_row - distance;
int row_max = ref_row + distance;
int col_min = ref_col - distance;
int col_max = ref_col + distance;
int_mv fcenter_mv;
int *mvjsadcost = x->nmvjointsadcost;
int *mvsadcost[2] = {x->nmvsadcost[0], x->nmvsadcost[1]};
fcenter_mv.as_mv.row = center_mv->as_mv.row >> 3;
fcenter_mv.as_mv.col = center_mv->as_mv.col >> 3;
// Work out the mid point for the search
in_what = *(d->base_pre) + d->pre;
bestaddress = in_what + (ref_row * d->pre_stride) + ref_col;
2010-05-18 19:58:33 +04:00
best_mv->as_mv.row = ref_row;
best_mv->as_mv.col = ref_col;
2010-05-18 19:58:33 +04:00
// Baseline value at the centre
bestsad = fn_ptr->sdf(what, what_stride, bestaddress,
in_what_stride, 0x7fffffff)
+ mvsad_err_cost(best_mv, &fcenter_mv, mvjsadcost, mvsadcost,
sad_per_bit);
2010-05-18 19:58:33 +04:00
// Apply further limits to prevent us looking using vectors that stretch beyiond the UMV border
if (col_min < x->mv_col_min)
col_min = x->mv_col_min;
2010-05-18 19:58:33 +04:00
if (col_max > x->mv_col_max)
col_max = x->mv_col_max;
2010-05-18 19:58:33 +04:00
if (row_min < x->mv_row_min)
row_min = x->mv_row_min;
2010-05-18 19:58:33 +04:00
if (row_max > x->mv_row_max)
row_max = x->mv_row_max;
2010-05-18 19:58:33 +04:00
for (r = row_min; r < row_max; r++) {
this_mv.as_mv.row = r;
check_here = r * mv_stride + in_what + col_min;
2010-05-18 19:58:33 +04:00
for (c = col_min; c < col_max; c++) {
thissad = fn_ptr->sdf(what, what_stride, check_here, in_what_stride, bestsad);
2010-05-18 19:58:33 +04:00
this_mv.as_mv.col = c;
thissad += mvsad_err_cost(&this_mv, &fcenter_mv,
mvjsadcost, mvsadcost, sad_per_bit);
2010-05-18 19:58:33 +04:00
if (thissad < bestsad) {
bestsad = thissad;
best_mv->as_mv.row = r;
best_mv->as_mv.col = c;
bestaddress = check_here;
}
2010-05-18 19:58:33 +04:00
check_here++;
2010-05-18 19:58:33 +04:00
}
}
2010-05-18 19:58:33 +04:00
this_mv.as_mv.row = best_mv->as_mv.row << 3;
this_mv.as_mv.col = best_mv->as_mv.col << 3;
2010-05-18 19:58:33 +04:00
if (bestsad < INT_MAX)
return
fn_ptr->vf(what, what_stride, bestaddress, in_what_stride,
(unsigned int *)(&thissad)) +
mv_err_cost(&this_mv, center_mv, mvjcost, mvcost, x->errorperbit,
xd->allow_high_precision_mv);
else
return INT_MAX;
2010-05-18 19:58:33 +04:00
}
int vp9_full_search_sadx3(MACROBLOCK *x, BLOCK *b, BLOCKD *d, int_mv *ref_mv,
int sad_per_bit, int distance,
vp9_variance_fn_ptr_t *fn_ptr, int *mvjcost,
int *mvcost[2], int_mv *center_mv) {
uint8_t *what = (*(b->base_src) + b->src);
int what_stride = b->src_stride;
uint8_t *in_what;
int in_what_stride = d->pre_stride;
int mv_stride = d->pre_stride;
uint8_t *bestaddress;
int_mv *best_mv = &d->bmi.as_mv.first;
int_mv this_mv;
unsigned int bestsad = INT_MAX;
int r, c;
uint8_t *check_here;
unsigned int thissad;
MACROBLOCKD *xd = &x->e_mbd;
int ref_row = ref_mv->as_mv.row;
int ref_col = ref_mv->as_mv.col;
int row_min = ref_row - distance;
int row_max = ref_row + distance;
int col_min = ref_col - distance;
int col_max = ref_col + distance;
unsigned int sad_array[3];
int_mv fcenter_mv;
int *mvjsadcost = x->nmvjointsadcost;
int *mvsadcost[2] = {x->nmvsadcost[0], x->nmvsadcost[1]};
fcenter_mv.as_mv.row = center_mv->as_mv.row >> 3;
fcenter_mv.as_mv.col = center_mv->as_mv.col >> 3;
// Work out the mid point for the search
in_what = *(d->base_pre) + d->pre;
bestaddress = in_what + (ref_row * d->pre_stride) + ref_col;
best_mv->as_mv.row = ref_row;
best_mv->as_mv.col = ref_col;
// Baseline value at the centre
bestsad = fn_ptr->sdf(what, what_stride,
bestaddress, in_what_stride, 0x7fffffff)
+ mvsad_err_cost(best_mv, &fcenter_mv, mvjsadcost, mvsadcost,
sad_per_bit);
// Apply further limits to prevent us looking using vectors that stretch beyiond the UMV border
if (col_min < x->mv_col_min)
col_min = x->mv_col_min;
if (col_max > x->mv_col_max)
col_max = x->mv_col_max;
if (row_min < x->mv_row_min)
row_min = x->mv_row_min;
if (row_max > x->mv_row_max)
row_max = x->mv_row_max;
for (r = row_min; r < row_max; r++) {
this_mv.as_mv.row = r;
check_here = r * mv_stride + in_what + col_min;
c = col_min;
while ((c + 2) < col_max) {
int i;
fn_ptr->sdx3f(what, what_stride, check_here, in_what_stride, sad_array);
for (i = 0; i < 3; i++) {
thissad = sad_array[i];
if (thissad < bestsad) {
this_mv.as_mv.col = c;
thissad += mvsad_err_cost(&this_mv, &fcenter_mv,
mvjsadcost, mvsadcost, sad_per_bit);
if (thissad < bestsad) {
bestsad = thissad;
best_mv->as_mv.row = r;
best_mv->as_mv.col = c;
bestaddress = check_here;
}
2010-05-18 19:58:33 +04:00
}
check_here++;
c++;
}
}
while (c < col_max) {
thissad = fn_ptr->sdf(what, what_stride, check_here, in_what_stride, bestsad);
2010-05-18 19:58:33 +04:00
if (thissad < bestsad) {
this_mv.as_mv.col = c;
thissad += mvsad_err_cost(&this_mv, &fcenter_mv,
mvjsadcost, mvsadcost, sad_per_bit);
if (thissad < bestsad) {
bestsad = thissad;
best_mv->as_mv.row = r;
best_mv->as_mv.col = c;
bestaddress = check_here;
2010-05-18 19:58:33 +04:00
}
}
2010-05-18 19:58:33 +04:00
check_here++;
c++;
2010-05-18 19:58:33 +04:00
}
}
this_mv.as_mv.row = best_mv->as_mv.row << 3;
this_mv.as_mv.col = best_mv->as_mv.col << 3;
2010-05-18 19:58:33 +04:00
if (bestsad < INT_MAX)
return
fn_ptr->vf(what, what_stride, bestaddress, in_what_stride,
(unsigned int *)(&thissad)) +
mv_err_cost(&this_mv, center_mv, mvjcost, mvcost, x->errorperbit,
xd->allow_high_precision_mv);
else
return INT_MAX;
2010-05-18 19:58:33 +04:00
}
int vp9_full_search_sadx8(MACROBLOCK *x, BLOCK *b, BLOCKD *d, int_mv *ref_mv,
int sad_per_bit, int distance,
vp9_variance_fn_ptr_t *fn_ptr,
int *mvjcost, int *mvcost[2],
int_mv *center_mv) {
uint8_t *what = (*(b->base_src) + b->src);
int what_stride = b->src_stride;
uint8_t *in_what;
int in_what_stride = d->pre_stride;
int mv_stride = d->pre_stride;
uint8_t *bestaddress;
int_mv *best_mv = &d->bmi.as_mv.first;
int_mv this_mv;
unsigned int bestsad = INT_MAX;
int r, c;
uint8_t *check_here;
unsigned int thissad;
MACROBLOCKD *xd = &x->e_mbd;
int ref_row = ref_mv->as_mv.row;
int ref_col = ref_mv->as_mv.col;
int row_min = ref_row - distance;
int row_max = ref_row + distance;
int col_min = ref_col - distance;
int col_max = ref_col + distance;
DECLARE_ALIGNED_ARRAY(16, uint16_t, sad_array8, 8);
unsigned int sad_array[3];
int_mv fcenter_mv;
int *mvjsadcost = x->nmvjointsadcost;
int *mvsadcost[2] = {x->nmvsadcost[0], x->nmvsadcost[1]};
fcenter_mv.as_mv.row = center_mv->as_mv.row >> 3;
fcenter_mv.as_mv.col = center_mv->as_mv.col >> 3;
// Work out the mid point for the search
in_what = *(d->base_pre) + d->pre;
bestaddress = in_what + (ref_row * d->pre_stride) + ref_col;
best_mv->as_mv.row = ref_row;
best_mv->as_mv.col = ref_col;
// Baseline value at the centre
bestsad = fn_ptr->sdf(what, what_stride,
bestaddress, in_what_stride, 0x7fffffff)
+ mvsad_err_cost(best_mv, &fcenter_mv, mvjsadcost, mvsadcost,
sad_per_bit);
// Apply further limits to prevent us looking using vectors that stretch beyiond the UMV border
if (col_min < x->mv_col_min)
col_min = x->mv_col_min;
if (col_max > x->mv_col_max)
col_max = x->mv_col_max;
if (row_min < x->mv_row_min)
row_min = x->mv_row_min;
if (row_max > x->mv_row_max)
row_max = x->mv_row_max;
for (r = row_min; r < row_max; r++) {
this_mv.as_mv.row = r;
check_here = r * mv_stride + in_what + col_min;
c = col_min;
while ((c + 7) < col_max) {
int i;
fn_ptr->sdx8f(what, what_stride, check_here, in_what_stride, sad_array8);
for (i = 0; i < 8; i++) {
thissad = (unsigned int)sad_array8[i];
if (thissad < bestsad) {
this_mv.as_mv.col = c;
thissad += mvsad_err_cost(&this_mv, &fcenter_mv,
mvjsadcost, mvsadcost, sad_per_bit);
if (thissad < bestsad) {
bestsad = thissad;
best_mv->as_mv.row = r;
best_mv->as_mv.col = c;
bestaddress = check_here;
}
}
check_here++;
c++;
}
}
while ((c + 2) < col_max) {
int i;
fn_ptr->sdx3f(what, what_stride, check_here, in_what_stride, sad_array);
for (i = 0; i < 3; i++) {
thissad = sad_array[i];
if (thissad < bestsad) {
this_mv.as_mv.col = c;
thissad += mvsad_err_cost(&this_mv, &fcenter_mv,
mvjsadcost, mvsadcost, sad_per_bit);
if (thissad < bestsad) {
bestsad = thissad;
best_mv->as_mv.row = r;
best_mv->as_mv.col = c;
bestaddress = check_here;
}
}
check_here++;
c++;
}
}
while (c < col_max) {
thissad = fn_ptr->sdf(what, what_stride, check_here, in_what_stride, bestsad);
if (thissad < bestsad) {
this_mv.as_mv.col = c;
thissad += mvsad_err_cost(&this_mv, &fcenter_mv,
mvjsadcost, mvsadcost, sad_per_bit);
if (thissad < bestsad) {
bestsad = thissad;
best_mv->as_mv.row = r;
best_mv->as_mv.col = c;
bestaddress = check_here;
}
}
check_here++;
c++;
}
}
this_mv.as_mv.row = best_mv->as_mv.row << 3;
this_mv.as_mv.col = best_mv->as_mv.col << 3;
if (bestsad < INT_MAX)
return
fn_ptr->vf(what, what_stride, bestaddress, in_what_stride,
(unsigned int *)(&thissad)) +
mv_err_cost(&this_mv, center_mv, mvjcost, mvcost, x->errorperbit,
xd->allow_high_precision_mv);
else
return INT_MAX;
}
int vp9_refining_search_sad_c(MACROBLOCK *x, BLOCK *b, BLOCKD *d,
int_mv *ref_mv, int error_per_bit,
int search_range, vp9_variance_fn_ptr_t *fn_ptr,
int *mvjcost, int *mvcost[2], int_mv *center_mv) {
MV neighbors[4] = {{ -1, 0}, {0, -1}, {0, 1}, {1, 0}};
int i, j;
int this_row_offset, this_col_offset;
int what_stride = b->src_stride;
int in_what_stride = d->pre_stride;
uint8_t *what = (*(b->base_src) + b->src);
uint8_t *best_address = (uint8_t *)(*(d->base_pre) + d->pre +
(ref_mv->as_mv.row * (d->pre_stride)) +
ref_mv->as_mv.col);
uint8_t *check_here;
unsigned int thissad;
int_mv this_mv;
unsigned int bestsad = INT_MAX;
MACROBLOCKD *xd = &x->e_mbd;
int_mv fcenter_mv;
int *mvjsadcost = x->nmvjointsadcost;
int *mvsadcost[2] = {x->nmvsadcost[0], x->nmvsadcost[1]};
fcenter_mv.as_mv.row = center_mv->as_mv.row >> 3;
fcenter_mv.as_mv.col = center_mv->as_mv.col >> 3;
bestsad = fn_ptr->sdf(what, what_stride, best_address, in_what_stride, 0x7fffffff) +
mvsad_err_cost(ref_mv, &fcenter_mv, mvjsadcost, mvsadcost, error_per_bit);
for (i = 0; i < search_range; i++) {
int best_site = -1;
for (j = 0; j < 4; j++) {
this_row_offset = ref_mv->as_mv.row + neighbors[j].row;
this_col_offset = ref_mv->as_mv.col + neighbors[j].col;
if ((this_col_offset > x->mv_col_min) && (this_col_offset < x->mv_col_max) &&
(this_row_offset > x->mv_row_min) && (this_row_offset < x->mv_row_max)) {
check_here = (neighbors[j].row) * in_what_stride + neighbors[j].col + best_address;
thissad = fn_ptr->sdf(what, what_stride, check_here, in_what_stride, bestsad);
if (thissad < bestsad) {
this_mv.as_mv.row = this_row_offset;
this_mv.as_mv.col = this_col_offset;
thissad += mvsad_err_cost(&this_mv, &fcenter_mv, mvjsadcost,
mvsadcost, error_per_bit);
if (thissad < bestsad) {
bestsad = thissad;
best_site = j;
}
}
}
}
if (best_site == -1)
break;
else {
ref_mv->as_mv.row += neighbors[best_site].row;
ref_mv->as_mv.col += neighbors[best_site].col;
best_address += (neighbors[best_site].row) * in_what_stride + neighbors[best_site].col;
}
}
this_mv.as_mv.row = ref_mv->as_mv.row << 3;
this_mv.as_mv.col = ref_mv->as_mv.col << 3;
if (bestsad < INT_MAX)
return
fn_ptr->vf(what, what_stride, best_address, in_what_stride,
(unsigned int *)(&thissad)) +
mv_err_cost(&this_mv, center_mv, mvjcost, mvcost, x->errorperbit,
xd->allow_high_precision_mv);
else
return INT_MAX;
}
int vp9_refining_search_sadx4(MACROBLOCK *x, BLOCK *b, BLOCKD *d,
int_mv *ref_mv, int error_per_bit,
int search_range, vp9_variance_fn_ptr_t *fn_ptr,
int *mvjcost, int *mvcost[2], int_mv *center_mv) {
MV neighbors[4] = {{ -1, 0}, {0, -1}, {0, 1}, {1, 0}};
int i, j;
int this_row_offset, this_col_offset;
int what_stride = b->src_stride;
int in_what_stride = d->pre_stride;
uint8_t *what = (*(b->base_src) + b->src);
uint8_t *best_address = (uint8_t *)(*(d->base_pre) + d->pre +
(ref_mv->as_mv.row * (d->pre_stride)) +
ref_mv->as_mv.col);
uint8_t *check_here;
unsigned int thissad;
int_mv this_mv;
unsigned int bestsad = INT_MAX;
MACROBLOCKD *xd = &x->e_mbd;
int_mv fcenter_mv;
int *mvjsadcost = x->nmvjointsadcost;
int *mvsadcost[2] = {x->nmvsadcost[0], x->nmvsadcost[1]};
fcenter_mv.as_mv.row = center_mv->as_mv.row >> 3;
fcenter_mv.as_mv.col = center_mv->as_mv.col >> 3;
bestsad = fn_ptr->sdf(what, what_stride, best_address, in_what_stride, 0x7fffffff) +
mvsad_err_cost(ref_mv, &fcenter_mv, mvjsadcost, mvsadcost, error_per_bit);
for (i = 0; i < search_range; i++) {
int best_site = -1;
int all_in = 1;
all_in &= ((ref_mv->as_mv.row - 1) > x->mv_row_min);
all_in &= ((ref_mv->as_mv.row + 1) < x->mv_row_max);
all_in &= ((ref_mv->as_mv.col - 1) > x->mv_col_min);
all_in &= ((ref_mv->as_mv.col + 1) < x->mv_col_max);
if (all_in) {
unsigned int sad_array[4];
unsigned char const *block_offset[4];
block_offset[0] = best_address - in_what_stride;
block_offset[1] = best_address - 1;
block_offset[2] = best_address + 1;
block_offset[3] = best_address + in_what_stride;
fn_ptr->sdx4df(what, what_stride, block_offset, in_what_stride, sad_array);
for (j = 0; j < 4; j++) {
if (sad_array[j] < bestsad) {
this_mv.as_mv.row = ref_mv->as_mv.row + neighbors[j].row;
this_mv.as_mv.col = ref_mv->as_mv.col + neighbors[j].col;
sad_array[j] += mvsad_err_cost(&this_mv, &fcenter_mv, mvjsadcost,
mvsadcost, error_per_bit);
if (sad_array[j] < bestsad) {
bestsad = sad_array[j];
best_site = j;
}
}
}
} else {
for (j = 0; j < 4; j++) {
this_row_offset = ref_mv->as_mv.row + neighbors[j].row;
this_col_offset = ref_mv->as_mv.col + neighbors[j].col;
if ((this_col_offset > x->mv_col_min) && (this_col_offset < x->mv_col_max) &&
(this_row_offset > x->mv_row_min) && (this_row_offset < x->mv_row_max)) {
check_here = (neighbors[j].row) * in_what_stride + neighbors[j].col + best_address;
thissad = fn_ptr->sdf(what, what_stride, check_here, in_what_stride, bestsad);
if (thissad < bestsad) {
this_mv.as_mv.row = this_row_offset;
this_mv.as_mv.col = this_col_offset;
thissad += mvsad_err_cost(&this_mv, &fcenter_mv, mvjsadcost,
mvsadcost, error_per_bit);
if (thissad < bestsad) {
bestsad = thissad;
best_site = j;
}
}
}
}
}
if (best_site == -1)
break;
else {
ref_mv->as_mv.row += neighbors[best_site].row;
ref_mv->as_mv.col += neighbors[best_site].col;
best_address += (neighbors[best_site].row) * in_what_stride + neighbors[best_site].col;
}
}
this_mv.as_mv.row = ref_mv->as_mv.row << 3;
this_mv.as_mv.col = ref_mv->as_mv.col << 3;
if (bestsad < INT_MAX)
return
fn_ptr->vf(what, what_stride, best_address, in_what_stride,
(unsigned int *)(&thissad)) +
mv_err_cost(&this_mv, center_mv, mvjcost, mvcost, x->errorperbit,
xd->allow_high_precision_mv);
else
return INT_MAX;
}
2010-05-18 19:58:33 +04:00
#ifdef ENTROPY_STATS
void print_mode_context(void) {
FILE *f = fopen("vp9_modecont.c", "a");
int i, j;
fprintf(f, "#include \"vp9_entropy.h\"\n");
fprintf(f, "const int vp9_mode_contexts[6][4] =");
fprintf(f, "{\n");
for (j = 0; j < 6; j++) {
fprintf(f, " {/* %d */ ", j);
fprintf(f, " ");
for (i = 0; i < 4; i++) {
int this_prob;
// context probs
this_prob = get_binary_prob(mv_ref_ct[j][i][0], mv_ref_ct[j][i][1]);
fprintf(f, "%5d, ", this_prob);
}
fprintf(f, " },\n");
}
fprintf(f, "};\n");
fclose(f);
2010-05-18 19:58:33 +04:00
}
/* MV ref count ENTROPY_STATS stats code */
void init_mv_ref_counts() {
vpx_memset(mv_ref_ct, 0, sizeof(mv_ref_ct));
vpx_memset(mv_mode_cts, 0, sizeof(mv_mode_cts));
2010-05-18 19:58:33 +04:00
}
void accum_mv_refs(MB_PREDICTION_MODE m, const int ct[4]) {
if (m == ZEROMV) {
++mv_ref_ct [ct[0]] [0] [0];
++mv_mode_cts[0][0];
} else {
++mv_ref_ct [ct[0]] [0] [1];
++mv_mode_cts[0][1];
if (m == NEARESTMV) {
++mv_ref_ct [ct[1]] [1] [0];
++mv_mode_cts[1][0];
} else {
++mv_ref_ct [ct[1]] [1] [1];
++mv_mode_cts[1][1];
if (m == NEARMV) {
++mv_ref_ct [ct[2]] [2] [0];
++mv_mode_cts[2][0];
} else {
++mv_ref_ct [ct[2]] [2] [1];
++mv_mode_cts[2][1];
if (m == NEWMV) {
++mv_ref_ct [ct[3]] [3] [0];
++mv_mode_cts[3][0];
} else {
++mv_ref_ct [ct[3]] [3] [1];
++mv_mode_cts[3][1];
2010-05-18 19:58:33 +04:00
}
}
2010-05-18 19:58:33 +04:00
}
}
2010-05-18 19:58:33 +04:00
}
#endif/* END MV ref count ENTROPY_STATS stats code */