This flag was already added to aomedia/master, so bringing it back to
webm/nextgenv2, as part of an effort to get the two codebases in sync.
Change-Id: I2b933a6a160e4210d1411a9e7978149eb8553205
To get ready for pulling AV1 to nextgenv2
Replace the experimental flag by MOTION_VAR. Rename major variables.
Change-Id: If6cf4f37b9319c46d8f90df551cc7295d66ca205
The referenced bug was fixed by saving neon registers. That this had any
effect was coincidental.
Both chromium and Android build with clang and neither uses this flag.
Change-Id: I470247d6fd9226fc207b42a187105581a94badc3
(cherry picked from commit fad70a358b9ab832f5f2ece1609936b80b649c71)
When the experiment is ON, we use Paeth predictor instead of TM
predictor.
For derf set, this gives about 0.09% improvement overall, and 0.55%
improvement if all frames are forced to be intra-only.
Also, if the EXT_INTRA experiment is also on, the improvement overall
is 0.056%, and improvement if all frames are forced to be intra-only is
0.465%.
Change-Id: Id74e107ede70a8d2107fa14fcb3f44b23a437274
Cherry-Picked the following commits:
0defd8f Changed "WebM" to "AOMedia" & "webm" to "aomedia"
54e6676 Replace "VPx" by "AVx"
5082a36 Change "Vpx" to "Avx"
7df44f1 Replace "Vp9" w/ "Av1"
967f722 Remove kVp9CodecId
828f30c Change "Vp8" to "AOM"
030b5ff AUTHORS regenerated
2524cae Add ref-mv experimental flag
016762b Change copyright notice to AOMedia form
81e5526 Replace vp9 w/ av1
9b94565 Add missing files
fa8ca9f Change "vp9" to "av1"
ec838b7 Convert "vp8" to "aom"
80edfa0 Change "VP9" to "AV1"
d1a11fb Change "vp8" to "aom"
7b58251 Point to WebM test data
dd1a5c8 Replace "VP8" with "AOM"
ff00fc0 Change "VPX" to "AOM"
01dee0b Change "vp10" to "av1" in source code
cebe6f0 Convert "vpx" to "aom"
17b0567 rename vp10*.mk to av1_*.mk
fe5f8a8 rename files vp10_* to av1_*
Change-Id: I6fc3d18eb11fc171e46140c836ad5339cf6c9419
This is temporary until the global motion experiment is made to work
with ext_inter and dual_filter.
Change-Id: I73624ca6f536fd98218d7e07bcd7a2c1e6f5aebd
Mannually cherry-picked:
1579133 Use OD_DIVU for small divisions in temporal_filter.
0312229 Replace divides by small values with multiplies.
9c48eec Removing divisions from od_dir_find8()
0950ed8 Merge "Port active map / cyclic refresh fixes to vp10."
efefdad Port active map / cyclic refresh fixes to vp10.
1eaf748 Port switch to 9-bit rate cost to aom.
0b1606e Only build deringing code when --enable-dering.
e2511e1 Deringing cleanup: don't hardcode the number of levels
8fe5c5d Rename dering_in to od_dering_in to sync with Daala
4eb1380 Makes second filters for 45-degree directions horizontal
7f4c3f5 Removes the superblock variance contribution to the threshold
3dc56f9 Simplifying arithmetic by using multiply+shift
cf2aaba Return 0 explicitly for OD_ILOG(0).
49ca22a Use the Daala implementation of OD_ILOG().
8518724 Fix compiler warning in od_dering.c.
485d6a6 Prevent multiple inclusion of odintrin.h.
51b7a99 Adds the Daala deringing filter as experimental
Note that a few of the changes were already in libvpx codebse.
Change-Id: I1c32ee7694e5ad22c98b06ff97737cd792cd88ae
Manually cherry-picked following commits from AOMedia git repository:
bb2727c Sort includess for "clpf.h"
c297fd0 Add quantisation matrix range parameters.
0527894 Add encoder option and signaling for quant matrix control.
4106232 Turn off trellis coding for quantization matrices.
4017fca Modify tests to allow quantization matrices.
1c122c2 Add quant and dequant functions for new quant matrices.
95a8999 Enable CLPF
f72782b Fix a build issue
73bae50 Add quantisation matrices and selection functions
33208d2 Added support for constrained low pass filter (CLPF)
Change-Id: I60fc1ee1ac40e6b9d1d00affd97547ee5d5dd6be
This is a debug tool used to detect bitstream error. On encoder side, it pushes
each bit and probability into a queue before the bit is written into the
Arithmetic coder. On decoder side, whenever a bit is read out from the
Arithmetic coder, it pops up the reference bit and probability from the queue as
well. If the two results do not match, this debug tool will report an error.
This tool can be used to pin down the bitstream error precisely. By combining
gdb's backtrace method, we can detect which module causes the bitstream error.
Change-Id: I133a4371fafdd48c488f2ca47f9e395676c401f2
spatial/temporal scalability are not supported in VP10 currently.
+ remove the unused vp10/encoder/skin_detection.[hc]
this also enables DatarateTestLarge for VP10 which passes with no
experiments enabled. these were removed previously when only the SVC
tests should have been:
134710a Disable tests not applicable to VP10
Change-Id: I9ee7a0dd5ad3d8cc1e8fd5f0a90260fa43da387c
Added a new expt rect-tx to be used in conjunction with ext-tx.
[rect-tx is a temporary config flag and will eventually be
merged into ext-tx once it works correctly with all other
experiments].
Added 4x8 and 8x4 tranforms for use initially with rectangular
sub8x8 y blocks as part of this experiment.
There is about a -0.2% BDRATE improvement on lowres, others pending.
When var-tx is on rectangular transforms are currently not used.
That will be enabled in a subsequent patch.
Change-Id: Iaf3f88ede2740ffe6a0ffb1ef5fc01a16cd0283a
This commit bring all up-to-date changes from master that are
applicable to nextgenv2. Due to the remove VP10 code in master,
we had to cherry pick the following commits to get those changes:
Add default flags for arm64/armv8 builds
Allows building simple targets with sane default flags.
For example, using the Android arm64 toolchain from the NDK:
https://developer.android.com/ndk/guides/standalone_toolchain.html
./build/tools/make-standalone-toolchain.sh --arch=arm64 \
--platform=android-24 --install-dir=/tmp/arm64
CROSS=/tmp/arm64/bin/aarch64-linux-android- \
~/libvpx/configure --target=arm64-linux-gcc --disable-multithread
BUG=webm:1143
vpx_lpf_horizontal_4_sse2: Remove dead load.
Change-Id: I51026c52baa1f0881fcd5b68e1fdf08a2dc0916e
Fail early when android target does not include --sdk-path
Change-Id: I07e7e63476a2e32e3aae123abdee8b7bbbdc6a8c
configure: clean up var style and set_all usage
Use quotes whenever possible and {} always for variables.
Replace multiple set_all calls with *able_feature().
Conflicts:
build/make/configure.sh
vp9-svc: Remove some unneeded code/comment.
datarate_test,DatarateTestLarge: normalize bits type
quiets a msvc warning:
conversion from 'const int64_t' to 'size_t', possible loss of data
mips added p6600 cpu support
Removed -funroll-loops
psnr.c: use int64_t for sum of differences
Since the values can be negative.
*.asm: normalize label format
add a trailing ':', though it's optional with the tools we support, it's
more common to use it to mark a label. this also quiets the
orphan-labels warning with nasm/yasm.
BUG=b/29583530
Prevent negative variance
Due to rounding, hbd variance may become negative. This commit put in
check and clamp of negative values to 0.
configure: remove old visual studio support (<2010)
BUG=b/29583530
Conflicts:
configure
configure: restore vs_version variable
inadvertently lost in the final patchset of:
078dff7 configure: remove old visual studio support (<2010)
this prevents an empty CONFIG_VS_VERSION and avoids make failure
Require x86inc.asm
Force enable x86inc.asm when building for x86. Previously there were
compatibility issues so a flag was added to simplify disabling this
code.
The known issues have been resolved and x86inc.asm is the preferred
abstraction layer (over x86_abi_support.asm).
BUG=b:29583530
convolve_test: fix byte offsets in hbd build
CONVERT_TO_BYTEPTR(x) was corrected in:
003a9d2 Port metric computation changes from nextgenv2
to use the more common (x) within the expansion. offsets should occur
after converting the pointer to the desired type.
+ factorized some common expressions
Conflicts:
test/convolve_test.cc
vpx_dsp: remove x86inc.asm distinction
BUG=b:29583530
Conflicts:
vpx_dsp/vpx_dsp.mk
vpx_dsp/vpx_dsp_rtcd_defs.pl
vpx_dsp/x86/highbd_variance_sse2.c
vpx_dsp/x86/variance_sse2.c
test: remove x86inc.asm distinction
BUG=b:29583530
Conflicts:
test/vp9_subtract_test.cc
configure: remove x86inc.asm distinction
BUG=b:29583530
Change-Id: I59a1192142e89a6a36b906f65a491a734e603617
Update vpx subpixel 1d filter ssse3 asm
Speed test shows the new vertical filters have degradation on Celeron
Chromebook. Added "X86_SUBPIX_VFILTER_PREFER_SLOW_CELERON" to control
the vertical filters activated code. Now just simply active the code
without degradation on Celeron. Later there should be 2 set of vertical
filters ssse3 functions, and let jump table to choose based on CPU type.
improve vpx_filter_block1d* based on replace paddsw+psrlw to pmulhrsw
Make set_reference control API work in VP9
Moved the API patch from NextGenv2. An example was included.
To try it, for example, run the following command:
$ examples/vpx_cx_set_ref vp9 352 288 in.yuv out.ivf 4 30
Conflicts:
examples.mk
examples/vpx_cx_set_ref.c
test/cx_set_ref.sh
vp9/decoder/vp9_decoder.c
deblock filter : moved from vp8 code branch
The deblocking filters used in vp8 have been moved to vpx_dsp for
use by both vp8 and vp9.
vpx_thread.[hc]: update webp source reference
+ drop the blob hash, the updated reference will be updated in the
commit message
BUG=b/29583578
vpx_thread: use native windows cond var if available
BUG=b/29583578
original webp change:
commit 110ad5835ecd66995d0e7f66dca1b90dea595f5a
Author: James Zern <jzern@google.com>
Date: Mon Nov 23 19:49:58 2015 -0800
thread: use native windows cond var if available
Vista / Server 2008 and up. no speed difference observed.
100644 blob 4fc372b7bc6980a9ed3618c8cce5b67ed7b0f412 src/utils/thread.c
100644 blob 840831185502d42a3246e4b7ff870121c8064791 src/utils/thread.h
vpx_thread: use InitializeCriticalSectionEx if available
BUG=b/29583578
original webp change:
commit 63fadc9ffacc77d4617526a50c696d21d558a70b
Author: James Zern <jzern@google.com>
Date: Mon Nov 23 20:38:46 2015 -0800
thread: use InitializeCriticalSectionEx if available
Windows Vista / Server 2008 and up
100644 blob f84207d89b3a6bb98bfe8f3fa55cad72dfd061ff src/utils/thread.c
100644 blob 840831185502d42a3246e4b7ff870121c8064791 src/utils/thread.h
vpx_thread: use WaitForSingleObjectEx if available
BUG=b/29583578
original webp change:
commit 0fd0e12bfe83f16ce4f1c038b251ccbc13c62ac2
Author: James Zern <jzern@google.com>
Date: Mon Nov 23 20:40:26 2015 -0800
thread: use WaitForSingleObjectEx if available
Windows XP and up
100644 blob d58f74e5523dbc985fc531cf5f0833f1e9157cf0 src/utils/thread.c
100644 blob 840831185502d42a3246e4b7ff870121c8064791 src/utils/thread.h
vpx_thread: use CreateThread for windows phone
BUG=b/29583578
original webp change:
commit d2afe974f9d751de144ef09d31255aea13b442c0
Author: James Zern <jzern@google.com>
Date: Mon Nov 23 20:41:26 2015 -0800
thread: use CreateThread for windows phone
_beginthreadex is unavailable for winrt/uwp
Change-Id: Ie7412a568278ac67f0047f1764e2521193d74d4d
100644 blob 93f7622797f05f6acc1126e8296c481d276e4047 src/utils/thread.c
100644 blob 840831185502d42a3246e4b7ff870121c8064791 src/utils/thread.h
vp9_postproc.c missing extern.
BUG=webm:1256
deblock: missing const on extern const.
postproc - move filling of noise buffer to vpx_dsp.
Fix encoder crashes for odd size input
clean-up vp9_intrapred_test
remove tuple and overkill VP9IntraPredBase class.
postproc: noise style fixes.
gtest-all.cc: quiet an unused variable warning
under windows / mingw builds
vp9_intrapred_test: follow-up cleanup
address few comments from ce050afaf3e288895c3bee4160336e2d2133b6ea
Change-Id: I3eece7efa9335f4210303993ef6c1857ad5c29c8
Each time a codec is enabled or disabled with the umbrella
--enable-vpN flag, set the encoder and decoder configurations as well.
This was done as a post-processing step but doing that lost the order of
the arguments.
BUG=webm:1205
Change-Id: Ic629bfdd06acc04bc5a7227309f36bba54dad8b1
Also allows use of --enable-shared when configuring for Mac OS X,
producing a bare .dylib.
Enabling the shared framework bumps the iOS deployment target to 8.0,
the minimum required to support dynamic framework deployment in apps.
When not using --enable-shared, a static library for iOS 6.0+ will still
be built.
Minimum version settings have been moved into ios-version.sh so they
can be updated in a single place.
As with the static build, unless header search paths are manually
tweaked, users must add a VPX prefix on includes, such as:
#include <VPX/vpx/vpx_decoder.h>
A module map for headers is not yet included as inttypes.h is not
modular; this means that VPX cannot be used directly in Swift code,
but can still be pulled in through an Objective-C wrapper.
BUG=https://bugs.chromium.org/p/webm/issues/detail?id=1092
Change-Id: I28fb06ce65e48ed167a88c14a7bfb2861989317e
This experiment will implement the use of a backward prediction
reference without temporal filtering. No overlay frame will be
transmitted, instead, the flag of show_existing_frame will be turned
on.
Change-Id: I361a3004344e2ca6b63723f660635c0d790ee036
- iOS SDKs no longer ship with armv6 support.
- Our minimum iOS version means all target devices have neon.
- Remove armv6 darwin LD workaround.
- This removes a TODO.
Change-Id: I2fcb5b82c96213364275475be021c7dd8459d5c0
Using the up-sampled reference frames in sub-pixel motion search is
enabled as a speed feature for good-quality mode speed 0 and speed 1.
Change-Id: Ieb454bf8c646ddb99e87bd64c8e74dbd78d84a50
Up-sampled the reference frames to 8 times in each dimension using
the 8-tap interpolation filter. In sub-pixel motion search, use the
up-sampled reference frames to find the best matching blocks. This
largely improved the motion search precision, and thus, improved
the compression quality. There was no change in decoder side.
Borg test and speed test results:
1. On derflr set,
Overall PSNR gain: 1.306%, and SSIM gain: 1.512%.
Average speed loss on derf set was 6.0%.
2. On stdhd set,
Overall PSNR gain: 0.754%, and SSIM gain: 0.814%.
On hevchd set,
Overall PSNR gain: 0.465%, and SSIM gain: 0.527%.
Speed loss on HD clips was 3.5%.
Change-Id: I300ebaafff57e88914f3dedc8784cb21d316b04f
obmc: We add an obmc prediction mode at superblock level.
When it is enabled, predictors of the above and left blocks
are used to refine the regular block-based motion compensation.
Change-Id: I6310104ea3dfece16d736351e368861471dd1c9b
Temporaly disable warning for unused function for vp10, needs clean
out the warnings before re-enable the flag for vp10.
Change-Id: I5636f8cd607423f6ea6963db9c2cbd688e30b495
when INLINE is defined and mips is not being targeted. otherwise keep
the old --enable-extra-warnings behavior
Change-Id: Iba576edbe5fca03efa56ce99eee11f9cafc573ad
ext-partition: to hold partition extensions (ex. ext-partition,
ext-coding-unit-size from nextgen)
loop-restore: to hold in-loop restoration filter (ex. loop-postfilter
from nextgen and other Wiener restoration filters)
Change-Id: I71c7f1588f05fb0f2b00f7004a78e90c9cceae3f
The nominal tx_type for a given mode is used as a context
to encode the actual tx_type for intra.
Results:
derflr: -0.241% BDRATE
hevcmr: -0.366% BDRATE
Change-Id: Icfe7b0a58d79bc6497a06e3441779afec6e01e21
Urvang Joshi
Yue Chen
Johann
Yaowu Xu
Sarah Parker
Angie Chiang
James Zern
Debargha Mukherjee
Brion Vibber
Jingning Han
Zoe Liu
Tom Finegan
Martin Storsjo
Julia Robson
hui su
Yunqing Wang
Alex Converse