This is a proof of concept RTCD implementation to replace the current
system of nested includes, prototypes, INVOKE macros, etc. Currently
only the decoder specific functions are implemented in the new system.
Additional functions will be added in subsequent commits.
Overview:
RTCD "functions" are implemented as either a global function pointer
or a macro (when only one eligible specialization available).
Functions which have RTCD specializations are listed using a simple
DSL identifying the function's base name, its prototype, and the
architecture extensions that specializations are available for.
Advantages over the old system:
- No INVOKE macros. A call to an RTCD function looks like an ordinary
function call.
- No need to pass vtables around.
- If there is only one eligible function to call, the function is
called directly, rather than indirecting through a function pointer.
- Supports the notion of "required" extensions, so in combination with
the above, on x86_64 if the best function available is sse2 or lower
it will be called directly, since all x86_64 platforms implement
sse2.
- Elides all references to functions which will never be called, which
could reduce binary size. For example if sse2 is required and there
are both mmx and sse2 implementations of a certain function, the
code will have no link time references to the mmx code.
- Significantly easier to add a new function, just one file to edit.
Disadvantages:
- Requires global writable data (though this is not a new requirement)
- 1 new generated source file.
Change-Id: Iae6edab65315f79c168485c96872641c5aa09d55
Commit 892e23a5b introduced support for the VP8D_GET_LAST_REF_USED,
but missed the mapping of the control id to the underlying function,
so it was unavailable to applications.
In addition, the underlying function vp8_references_buffer() is
moved from common/postproc.c to decoder/onyxd_if.c as postproc.c is
not built in all configurations.
Change-Id: I426dd254e7e6c4c061b70d729b69a6c384ebbe44
Commit e06c242ba introduced a change to call vp8_find_near_mvs() only
once instead of once per reference frame by observing that the only
effect that the frame had was on the bias applied to the motion
vector. By keeping track of the sign_bias value, the mv to use could
be flip-flopped by multiplying its components by -1.
This behavior was subtley wrong in the case when clamping was applied
to the motion vectors found by vp8_find_near_mvs(). A motion vector
could be in-bounds with one sign bias, but out of bounds after
inverting the sign, or vice versa. The clamping must match that done
by the decoder.
This change modifies vp8_find_near_mvs() to remove the clamping from
that function. The vp8_pick_inter_mode() and vp8_rd_pick_inter_mode()
functions instead track the correctly clamped values for both bias
values, switching between them by simple assignment. The common
clamping and inversion code is in vp8_find_near_mvs_bias()
Change-Id: I17e1a348d1643497eca0be232e2fbe2acf8478e1
A processor with ARMv7 instructions does not
necessarily have NEON dsp extensions. This CL
has the added side effect of allowing the ability
to enable/disable the dsp extensions cleanly.
Change-Id: Ie1e879b8fe131885bc3d4138a0acc9ffe73a36df
Makes the thresholds for the multiframe quality enhancement module
depend on the difference between the base quantizers. Also modifies
the mixing function to weigh the current low quality frame less if
the difference in quantizer is large. With the above modifications
mfqe works well for both scalable patterns as well as low quality
key frames.
Change-Id: If24e94f63f3c292f939eea94f627e7ebfb27cb75
filter in a way such that when there is a single bad frame, the
post-processing is applied not only to just that frame but a
few subsequent frames as well.
Change-Id: Iba5d9896eed77244eb76b4a74692a93f8ecff634
When running multi-layer (ML) encodes and dynamically
changing coding parameters on the fly (e.g. frame
duration/rate, bandwidths allocated to each layer)
the encoder would not produce sensible output.
In certain cases the rate targeting would be
hideously inaccurate.
These fixes make it possible to change these coding
parameters correctly and to maintain accurate control
of the rate targeting.
I also added the specification of the input timebase
into the test program, vp8_scalable_patterns.c.
Patch 2: Moved declaration to appease MS compiler)
Change-Id: Ic8bb5a16daa924bb64974e740696e040d07ae363
with deblock or demacroblock filters. When --mfqe is used together
with --demacroblock or --deblock, mfqe is applied first and then
demacroblock/deblock is applied to the mfqe result.
Change-Id: Id83ee01f1b4a33a116f071dcf26d59c7f3497c32
precision used in initialization of roundoff is not a constant
updated to use #define MFQE_PRECISION 4
Change-Id: If2fc3d3d633d58a7f4ab34d258c232ec1e5f0a79
This patch removes the local copies of the dequantize
constants and implements John's idea as described
in "Make a local copy of the dequantized data" commit.
Change-Id: Ic6b7d681f00bf63263f71ff1e39ab2f80729e8b2
Adds a multiframe postprocessing module to enhance the quality of
certain frames that are coded at lower quality than preceding frames.
The module can be invoked from the commandline by use of the --mfqe
option, and will be most beneficial for enhancing the quality of
frames decoded using scalable patterns.
Uses the vp8_variance_var16x16 and vp8_variance_sad16x16 function
pointers to compute SAD and Variance of blocks.
Change-Id: Id73d2a6e3572d07f9f8e36bbce00a4fc5ffd8961
The code had a number of constructs like (condition)?1:0,
which is redundant with C's semantics. In the cases where a boolean
operator was used in the condition, simply remove the ternary part.
Otherwise adjust the surrounding expression to remove the condition
(eg, for rounding up. See pickinter.c and rdopt.c)
Change-Id: Icb2372defa3783cf31857d90b2630d06b2c7e1be
Multithreaded encoding was breaking at low bitrates
Please review/comment. Not sure if this is the best fix.
Change-Id: I87468c765372593fd865bc82e25121ebb8ca6af2
These functions are now used by the encoder.
This is WIP with the goal of creating a common idct/add for
the encoder and decoder. A boost of 1.8% was seen for
the HD rt test clip used.
[Tero] Added needed changes to ARM side.
Change-Id: Ibbb8000be09034203d7adffc457d3c3f8b06a5bf
The example encoder down-samples the input video frames a number of
times with a down-sampling factor, and then encodes and outputs
bitstreams with different resolutions.
Support arbitrary down-sampling factor, and down-sampling factor
can be different for each encoding level.
For example, the encoder can be tested as follows.
1. Configure with multi-resolution encoding enabled:
../libvpx/configure --target=x86-linux-gcc --disable-codecs
--enable-vp8 --enable-runtime_cpu_detect --enable-debug
--disable-install-docs --enable-error-concealment
--enable-multi-res-encoding
2. Run make
3. Encode:
If input video is 1280x720, run:
./vp8_multi_resolution_encoder 1280 720 input.yuv 1.ivf 2.ivf 3.ivf 1
(output: 1.ivf(1280x720); 2.ivf(640x360); 3.ivf(320x180).
The last parameter is set to 1/0 to show/not show PSNR.)
4. Decode:
./simple_decoder 1.ivf 1.yuv
./simple_decoder 2.ivf 2.yuv
./simple_decoder 3.ivf 3.yuv
5. View video:
mplayer 1.yuv -demuxer rawvideo -rawvideo w=1280:h=720 -loop 0 -fps 30
mplayer 2.yuv -demuxer rawvideo -rawvideo w=640:h=360 -loop 0 -fps 30
mplayer 3.yuv -demuxer rawvideo -rawvideo w=320:h=180 -loop 0 -fps 30
The encoding parameters can be modified in vp8_multi_resolution_encoder.c,
for example, target bitrate, frame rate...
Modified API. John helped a lot with that. Thanks!
Change-Id: I03be9a51167eddf94399f92d269599fb3f3d54f5
to the dqcoeff or qcoeff buffer. The encoder would
populate the dc coeffs of the y blocks as a separate
stage (recon_dcblock) and the decoder would use a special
version of the idct. This change eliminates the extra copy
and reduces the code footprint.
[Tero] Added needed changes to armv6 and NEON assembly.
Change-Id: I83202ffdbaf83f6e5dd69f4ba2519fcf0b13b3ba
Storing vp8_bilinear_filters_mmx in an mmx file and using it in an sse2
file is bad
Moving towards allowing --disable-mmx
Change-Id: I20493b35bdedcdcfc0915e6f05fdbe6c81a4a742
The calculated frame_rate is a state variable in the codec, and
shouldn't be maintained in the configuration struct. Move it to the
main part of cpi so that it isn't clobbered when the configuration
struct is updated. The initial framerate estimate is moved from the
vp8_cx_iface.c wrapper into the body of init_config() in onyx_if.c, so
that it is only called once and not reset on every call to
vp8_change_config().
Change-Id: I8d9a3d1283330d1ee297d07e9d78d1f2875f2465
Ronald recently sent me this patch that he did in April.
> From: Ronald S. Bultje <rbultje@google.com>
> Date: Thu, 28 Apr 2011 17:30:15 -0700
> Subject: [PATCH] SSE2 optimizations for
> vp8_build_intra_predictors_mby{,_s}().
HD decode tests have shown a performance boost up to 1.5%,
depending on material.
Patch set 3: Fixed encoder crash.
Change-Id: Ie1fd1fa3dc750eec1a7a20bfa2decc079dcf48c8
Call the idct/add after the tokenize. This is WIP with
the goal of creating a common idct/add for the encoder and
decoder. This move is necessary because the decoder's version
of the idct clobbers qcoeff, which is used by the tokenize.
Change-Id: I6b08d8e8397cd873647fa4fb9469884e3c876756
Added ARM optimized intra 4x4 prediction
- 2x faster on Profiler compared to C-code compiled with -O3
- Function interface changed a little to improve BLOCKD structure
access
Change-Id: I9bc2b723155943fe0cf03dd9ca5f1760f7a81f54
The referenced function (SignalObjectAndWait) isn't used. Reduces the
warnings with mingw32-w64 which defines this.
Change-Id: I4ce592879ec9372bf196dac640204c4d370bd210
Changed 'int eob' to 'char *eob' in BLOCKD so that both encoder and
decoder will use eobs[25] array from MACROBLOCKD structure. In future,
this will enable use of the decoder side IDCT in the encoder.
Change-Id: I6e1c011628cb8864fd4a0b80f0279ce16a5ca978
Adding support for several partitions within one input fragment.
This is necessary to fully support all possible packetization
combinations in the VP8 RTP profile. Several partitions can
be transmitted in the same packet, and they can only be split
by reading the partition lengths from the bitstream.
Change-Id: If7d7ea331cc78cb7efd74c4a976b720c9a655463
Tests showed ~1.2% performance boost on the HD clip used.
Performance will vary based on material.
Change-Id: Icbcf1a828750d5b4ae5252bf596b3ef594042e8a
The partial frame copy function used to copy an extra 8 lines above
and below. The partial frame filtering can only modify 3 pixel rows
above the partial frame. Reduce copy to bare minimum needed, which is
4 lines, so that partial filtering on copied frame is possible.
Define the "magic" fraction number for partial filtering in
loopfilter.h .
Change-Id: I4791ffc541b6884b12759a0d0714a8faf16147ec
check to make sure that cx_data buffer has enough room before
writting to it, prior behavior did not which could result in a crash.
Change-Id: I3fab6f2bc4a96d7c675ea81acd39ece121738b28
Instead of using the predict buffer, the decoder now writes
the predictor into the recon buffer. For blocks with eob=0,
unnecessary idcts can be eliminated. This gave a performance
boost of ~1.8% for the HD clips used.
Tero: Added needed changes to ARM side and scheduled some
assembly code to prevent interlocks.
Patch Set 6: Merged (I1bcdca7a95aacc3a181b9faa6b10e3a71ee24df3)
into this commit because of similarities in the idct
functions.
Patch Set 7: EC bug fix.
Change-Id: Ie31d90b5d3522e1108163f2ac491e455e3f955e6
Added the ability to create rate-targeted, temporally
scalable, VP8 compatible bitstreams.
The application vp8_scalable_patterns.c demonstrates how
to use this capability. Users can create output bitstreams
containing upto 5 temporally separable streams encoded
as a single VP8 bitstream.
(previously abandoned as:
I92d1483e887adb274d07ce9e567e4d0314881b0a)
Change-Id: I156250a3fe930be57c069d508c41b6a7a4ea8d6a
buffer_level in VP8_COMP and starting_buffer_level, optimal_buffer_level
and maximum_buffer_size in VP8_CONFIG changed from int to int64_t
to avoid potential crash issues for larger target bit rates.
Change-Id: I0d5ab6c8a44c2fef51f30cd8df4bb4b739c5df26
The data processed by the loopfilter overlaps. At the block level, this
results in some redundant transforms. Grouping the filtering allows for
a single 16x16 transpose (and inversion) instead of three 16x8 transposes
(and three more inversions).
This implementation is x86_64 only. We retain the previous
implementation for x86.
Improvements are obviously material dependant, but it seems to be ~%1 in
tests here.
Change-Id: I467b7ec3655be98fb5f1a94b5d145e5e5a660007
In the "Removed bmi copy to/from BLOCKD" commit, the copy
to the bmi in BLOCKD was eliminated. The clamp_mvs() used
the bmi in BLOCKD, which now contains incorrect values. This
patch fixes this problem.
Change-Id: I8eca1eaf4015052b0b63e90876f7ad321aba7cff
for SPLITMV and B_PRED modes. Modified code to use the bmi
found in mode_info_context instead of BLOCKD. On the decode
side, the uvmvs are calculated only when required, instead of
every macroblock. This is WIP. (bmi should eventually be
removed from BLOCKD)
Small performance gains noticed for RT encodes and decodes.(VGA)
Change-Id: I2ed7f0fd5ca733655df684aa82da575c77a973e7
Prepend idct function names with vp8_
so that under profiling they show up
associated with libvpx.
Change-Id: I4fe357b50236cb7730a4cc00164c0a3487a1d8b4
The data that the simple horizontal loopfilter reads is aligned, treat
it accordingly.
For the vertical, we only use the bottom 4 bytes, so don't read in 16
(and incur the penalty for unaligned access).
This shows a small improvement on older processors which have a
significant penalty for unaligned reads.
postproc_mmx.c is unused
Change-Id: I87b29bbc0c3b19ee1ca1de3c4f47332a53087b3d
Prepend . to local labels in assembly code. This
allows non unique labels within a file. Also
makes profiling information more informative
by keeping the function name with the loop name.
Change-Id: I7a983cb3a5ba2413d5dafd0a37936b268fb9e37f
When active map is specified and the current frame is not a key frame,
golden frame nor a altref frame then copy only those active regions.
This significantly reduces encoding time by as much as 19% on the test
system where realtime encoding is used. This is particularly useful
when the frame size is large (e.g. 2560x1600) and there's only a few
action macroblocks.
Change-Id: If394a813ec2df5a0201745d1348dbde4278f7ad4
This reverts commit b5ea2fbc2c. Further
testing showed noticable keyframe popping in some cases, reverting this
for now to give time for a proper fix.
Conflicts:
vp8/encoder/onyx_if.c
vp8/encoder/ratectrl.c
Change-Id: I159f53d1bf0e24c035754ab3ded8ccfd58fd04af
the neon code made several assumptions which were broken by a recent
change: https://review.webmproject.org/2676
update the code with new assumptions and guard them with a compile time
assert
Change-Id: I32a8378030759966068f34618d7b4b1b02e101a0
sharpness was not recalculated in vp8cx_pick_filter_level_fast
remove last_filter_type. all values are calculated, don't need to update
the lfi data when it changes.
always use cm->sharpness_level. the extra indirection was annoying.
don't track last frame_type or sharpness_level manually. frame type
only matters for motion search and sharpness_level is taken care of in
frame_init
move function declarations to their proper header
Change-Id: I7ef037bd4bf8cf5e37d2d36bd03b5e22a2ad91db
In sub-pixel motion search, the search range is small(+/- 3 pixels).
Preload whole search area from reference buffer into a 32-byte
aligned buffer. Then in search, load reference data from this buffer
instead. This keeps data in cache, and reduces the crossing cache-
line penalty. For tulip clip, tests on Intel Core2 Quad machine(linux)
showed encoder speed improvement:
3.4% at --rt --cpu-used =-4
2.8% at --rt --cpu-used =-3
2.3% at --rt --cpu-used =-2
2.2% at --rt --cpu-used =-1
Test on Atom notebook showed only 1.1% speed improvement(speed=-4).
Test on Xeon machine also showed less improvement, since unaligned
data access latency is greatly reduced in newer cores.
Next, I will apply similar idea to other 2 sub-pixel search functions
for encoding speed > 4.
Make this change exclusively for x86 platforms.
Change-Id: Ia7bb9f56169eac0f01009fe2b2f2ab5b61d2eb2f
allowing the compiler to inline this function. For real-time
encodes, this gave a boost of 1% to 2.5%, depending on the
speed setting.
Change-Id: I3929d176cca086b4261267b848419d5bcff21c02
This patch attempts to improve the handling of CBR streams with
respect to the short term buffering requirements. The "buffer level"
is changed to be an average over the rc buffer, rather than a long
running average. Overshoot is also tracked over the same interval
and the golden frame targets suppressed accordingly to correct for
overly aggressive boosting.
Testing shows that this is fairly consistently positive in one
metric or another -- some clips that show significant decreases
in quality have better buffering characteristics, others show
improvenents in both.
Change-Id: I924c89aa9bdb210271f2e03311e63de3f1f8f920
Separate simple filter with reduced no. of parameters.
MB filter level picking based on precalculated table. Level table updated for
each frame. Inside and edge limits precalculated and updated just when
sharpness changes. HEV threshhold is constant.
ARM targets use scalars and others vectors.
Change works only with --target=generic-gnu
All other targets have to be updated!
Change-Id: I6b73aca6b525075b20129a371699b2561bd4d51c
There were many instances in the code of vp8_coef_tokens and
vp8_coef_tokens-1, which was a preprocessor macro despite the naming
convention. Replace these with MAX_ENTROPY_TOKENS and ENTROPY_NODES,
respectively.
Change-Id: I72c4f6c7634c94e1fa066cd511471e5592c748da
With this commit frames can be received partition-by-partition
from the encoder and passed partition-by-partition to the
decoder.
At the encoder-side this makes it easier to split encoded
frames at partition boundaries, useful when packetizing
frames. When VPX_CODEC_USE_OUTPUT_PARTITION is enabled,
several VPX_CODEC_CX_FRAME_PKT packets will be returned
from vpx_codec_get_cx_data(), containing one partition
each. The partition_id (starting at 0) specifies the decoding
order of the partitions. All partitions but the last has
the VPX_FRAME_IS_FRAGMENT flag set.
At the decoder this opens up the possibility of decoding partition
N even though partition N-1 was lost (given that independent
partitioning has been enabled in the encoder) if more info
about the missing parts of the stream is available through
external signaling.
Each partition is passed to the decoder through the
vpx_codec_decode() function, with the data pointer pointing
to the start of the partition, and with data_sz equal to the
size of the partition. Missing partitions can be signaled to
the decoder by setting data != NULL and data_sz = 0. When
all partitions have been given to the decoder "end of data"
should be signaled by calling vpx_codec_decode() with
data = NULL and data_sz = 0.
The first partition is the first partition according to the
VP8 bitstream + the uncompressed data chunk + DCT address
offsets if multiple residual partitions are used.
Change-Id: I5bc0682b9e4112e0db77904755c694c3c7ac6e74
Adding support in the encoder for generating
independent residual partitions by forcing
equal probabilities over the prev coef entropy
contexts.
Change-Id: I402f5c353255f3ca20eae2620af739f6a498cd21
The current code stores pointers to coefficient tables and loads them to
access the tables contents. As these pointers are stored in the code
sections, it means we end up with text relocations. eu-findtextrel will
thus complain about code not compiled with -fpic/-fPIC.
Since the pointers are stored in the code sections, we can actually cheat
and let the assembler generate relative addressing when accessing the
coefficient tables, and just load their location with adr.
Change-Id: Ib74ae2d3f2bab80b29991355f2dbe6955f38f6ae
Only the first frame buffer ref counter was being initialized
because the index was fixed at 0 rather than using i.
Change-Id: Ib842298be4a5e3607f9e21c2cd4bfbee4054ffc4
vp8_yv12_copy_frame_ptr() expects same size
buffers which was not previously gaurenteed.
Using an improperly allocated buffer would
cause a crash before.
Change-Id: I904982313ce9352474f80de842013dcd89f48685
Small decode performance gain (~1%) on keyframes. No
noticeable gains on encode. Also changed pick_intra4x4mby_modes()
to read the above and left block modes for keyframes only.
Change-Id: I1f4885252f5b3e9caf04d4e01e643960f910aba5
Declared the bmi in BLOCKD as a union instead of B_MODE_INFO.
Then removed B_MODE_INFO completely.
Change-Id: Ieb7469899e265892c66f7aeac87b7f2bf38e7a67
Declared the bmi in MODE_INFO as a union instead of B_MODE_INFO.
This reduced the memory footprint by 518,400 bytes for 1080
resolutions. The decoder performance improved by ~4% for the
clip used and the encoder showed very small improvements. (0.5%)
This reduction was first mentioned to me by John K. and in a
later discussion by Yaowu.
This is WIP.
Change-Id: I8e175fdbc46d28c35277302a04bee4540efc8d29
The error-concealer is plugged in after any motion vectors have been
decoded. It tries to estimate any missing motion vectors from the
motion vectors of the previous frame. Intra blocks with missing
residual are replaced with inter blocks with estimated motion vectors.
This feature was developed in a separate sandbox
(sandbox/holmer/error-concealment).
Change-Id: I5c8917b031078d79dbafd90f6006680e84a23412
rvct 4.1 was complaining about vstmia.16, store multiple expects 64 data type.
optimized the implementation.
Change-Id: I0701052cabd685c375637bbc3796ff6d88f5972c
The compiler produces better assembly when using int_mv
for assignments. The compiler shifts and ors the two 16bit
values when assigning MV.
Change-Id: I52ce4bc2bfbfaf3f1151204b2f21e1e0654f960f
global values were being referenced, but the GOT was not being set up.
as the GOT is only required for PIC, this issue wasn't caught in the
default configuration.
Change-Id: I8006e53776139362a76f2c80cf9d0f8458602b2f
http://code.google.com/p/webm/issues/detail?id=328
The existing emulation of posix semaphores on Windows uses SetEvent()
and WaitForSingleObject(), which implements a binary semaphore, not a
counting semaphore as implemented by posix. This causes deadlock when
used with the expected posix semantics. Instead, this patch uses the
CreateSemaphore() and ReleaseSemaphore() calls (introduced in Windows
2000) which have the expected behavior.
This patch also reverts commit eb16f00, which split a semaphore that
was being used with counting semantics into two binary semaphores.
That commit is unnecessary with corrected emulation.
Change-Id: If400771536a27af4b0c3a31aa4c4e9ced89ce6a0
Renamed configure option "enable-psnr" to "enable-internal-stats" to
better reflect the purpose of the option and eliminate the confusion
reported in http://code.google.com/p/webm/issues/detail?id=35
Change-Id: If72df6fdb9f1e33dab1329240ba4d8911d2f1f7a
the decision to run the regular or simple loopfilter is made outside the
function and managed with pointers
stop tracking the option in two places. use filter_type exclusively
Change-Id: I39d7b5d1352885efc632c0a94aaf56b72cc2fe15
The dc_diff flag is used to skip loopfiltering. Instead
of setting this flag in the decoder/encoder, we now check
for this condition in the loopfilter.
Change-Id: Ie2b9cdf9e0f4e8b932bbd36e0878c05bffd28931
Code cleanup. The build inter predictor functions are
redundantly checking the mode_info_context for either
INTRA_FRAME or SPLITMV.
Change-Id: I4d58c3a5192a4c2cec5c24ab1caf608bf13aebfb
Golden and ALT reference buffers were refreshed by copying from
the new buffer. Replaced this by index manipulation.
Also moved all the reference frame updates to one function for
easier tracking.
Change-Id: Icd3e534e7e2c8c5567168d222e6a64a96aae24a1
the win64 abi requires saving and restoring xmm6:xmm15. currently
SAVE_XMM and RESTORE XMM only allow for saving xmm6:xmm7. allow
specifying the highest register used and if the stack is unaligned.
Change-Id: Ica5699622ffe3346d3a486f48eef0206c51cf867
Went through the code and fixed it. Verified on Windows.
Where possible, remove dependencies on xmm[67]
Current code relies on pushing rbp to the stack to get 16 byte
alignment. This broke when rbp wasn't pushed
(vp8/encoder/x86/sad_sse3.asm). Work around this by using unaligned
memory accesses. Revisit this and the offsets in
vp8/encoder/x86/sad_sse3.asm in another change to SAVE_XMM.
Change-Id: I5f940994d3ebfd977c3d68446cef20fd78b07877
This is reported by m...@hesotech.de (see issue 312):
"The decoder causes an access violation
when you decode the first frame, then make a pause of about
60 seconds and then decode further frames. But only if
vpx_codec_dec_cfg_t.threads> 1.
This is caused by a timeout of WaitForSingleObject.
When I change the definition of VPXINFINITE to INFINITE(0xFFFFFFFF),
the problem is solved."
Reproduced the crash and verified the changes on Windows platform.
This brings the behavior inline with the other platforms using sem_wait().
Change-Id: I27b32f90bce05846ef2684b50f7a88f292299da1
vp8_filter_block1d16_h4_ssse3 was never called
because UNSHADOW_ARGS moves the stack by 'mov rsp, rbp', the issue was
masked. however, if/when win64 used those registers for persistant data,
issues could/will arise.
Change-Id: I56d6effca0aeba1f86082689771cb10145d39651
This patch cleans up the source buffer storage and copy mechanism to
allow access through a standard push/pop/peek interface. This approach
also avoids an extra copy in the case where the source is not a
multiple of 16, fixing issue #102.
Change-Id: I05808c39f5743625cb4c7af54cc841b9b10fdbd9
This patch changes the rc_undershoot_pct and rc_overshoot_pct controls
to set the "aggressiveness" of rate adaptation, by limiting the
amount of difference between the target buffer level and the actual
buffer level which is applied to the target frame rate for this frame.
This patch was initially provided by arosenberg at logitech.com as
an attachment to issue #270. It was modified to separate these controls
from the other unrelated modifications in that patch, as well as to
use the pre-existing variables rather than introducing new ones.
Change-Id: Id542e3f5667dd92d857d5eabf29878f2fd730a62
MV sad cost error is only used in full-pixel motion search,
which only need full-pixel resolution instead of quarter-pixel
resolution. This change reduced mvsadcost table size, and
removed unneccessary pamameter passing since this table is
constant once it is generated.
Change-Id: I9f931e55f6abc3c99011321f1dfb2f3562e6f6b0
Detect the number of available cores and limit the thread allocation
accordingly. On decoder side limit the number of threads to the max
number of token partition.
Core detetction works on Windows and
Posix platforms, which define _SC_NPROCESSORS_ONLN or _SC_NPROC_ONLN.
Change-Id: I76cbe37c18d3b8035e508b7a1795577674efc078
A large number of functions were defined with external linkage, even
though they were only used from within one file. This patch changes
their linkage to static and removes the vp8_ prefix from their names,
which should make it more obvious to the reader that the function is
contained within the current translation unit. Functions that were
not referenced were removed.
These symbols were identified by:
$ nm -A libvpx.a | sort -k3 | uniq -c -f2 | grep ' [A-Z] ' \
| sort | grep '^ *1 '
Change-Id: I59609f58ab65312012c047036ae1e0634f795779
Fixes implicit declaration warning for 'mach_task_self'. This change
is an update to Change I9991dedd1ccfddc092eca86705ecbc3b764b799d,
which fixed this issue for the decoder but not the encoder.
Change-Id: I9df033e81f9520c4f975b7a7cf6c643d12e87c96
The vp8_build_intra_predictors_mby and vp8_build_intra_predictors_mby_s
functions had global function pointers rather than using the RTCD
framework. This can show up as a potential data race with tools such as
helgrind. See https://bugzilla.mozilla.org/show_bug.cgi?id=640935
for an example.
Change-Id: I29c407f828ac2bddfc039f852f138de5de888534
make reference version of bilinear_filters short.
use reference versions of bilinear_filters and sub_pel_filters when
possible.
recognize that Width was being passed into
filter_block2d_bil_first_pass multiple times. ARM version had already
fixed this. propegate to C.
change references to src_pixels_per_line to src_pitch and standardize on
src/dst (instead of input/output).
recognize that first_pass is only run in the verticle and second_pass
only horizontal. ARM version had already fixed this. propegate to C
Change-Id: I292d376d239a9a7ca37ec2bf03cc0720606983e2
it's difficult to mux the *_offsets.c files because of header conflicts.
make three instead, name them consistently and partititon the contents
to allow building them as required.
Change-Id: I8f9768c09279f934f44b6c5b0ec363f7943bb796
common/arm/vpx_asm_offsets moves up a level. prepare for muxing with
encoder/arm/vpx_vp8_enc_asm_offsets
Change-Id: I89a04a5235447e66571995c9d9b4b6edcb038e24
John Koleszar
Attila Nagy
Fritz Koenig
Scott LaVarnway
Deb Mukherjee
Jim Bankoski
Adrian Grange
James Berry
Johann
Yunqing Wang
Tero Rintaluoma
James Zern
Stefan Holmer
Aaron Watry
Alpha Lam
Ronald S. Bultje
Mike Hommey
Taekhyun Kim
Aron Rosenberg
Thijs Vermeir
Yaowu Xu
Gaute Strokkenes