Fixed a couple of variable/function definitions, as well as header
handling to support 16K sequence coding at high bit-rates.
The width and height are each specified by two bytes in the header.
Use an extra byte to explicitly indicate the scaling factors in
both directions, each ranging from 0 to 15.
Tested coding up to 16400x16400 dimension.
Change-Id: Ibc2225c6036620270f2c0cf5172d1760aaec10ec
The width and height stored in the reference frames are padded out to
a multiple of 16. The Width and Height variables in common are the
displayed size, which may be smaller. The incorrect comparison was
causing scaling related code to be called when it shouldn't have
been. A notable case where this happens is 1080p, since 1088 != 1080.
Change-Id: I55f743eeeeaefbf2e777e193bc9a77ff726e16b5
This function was part of an optimization used in VP8 that required
caching two macroblocks. This is unused in VP9, and might not
survive refactoring to support superblocks, so removing it for now.
Change-Id: I744e585206ccc1ef9a402665c33863fc9fb46f0d
This patch makes the encoder's use of ref_frame_map and active_ref_idx
consistent with the decoder. ref_frame_map[] maps a reference buffer
index to its actual location in the yv12_fb array, since many
references may share an underlying buffer. active_ref_idx[] mirrors
cpi->{lst,gld,alt}_fb_idx, holding the active references in each
slot.
This also fixes a bug in setup_buffer_inter() where the incorrect
reference was used to populate the scaling factors.
Change-Id: Id3728f6d77cffcd27c248903bf51f9c3e594287e
Fixes a bug in vp9_set_internal_size() that prevented returning to
the unscaled state. Updated the ResizeInternalTest to scale both
down and up. Added a check that all frames are within 2.5% of the
quality of the initial keyframe.
Change-Id: I3b7ef17cdac144ed05b9148dce6badfa75cff5c8
This patch extends the previous support for using references of a
different resolution in ZEROMV mode to all inter prediction modes.
Subpixel based best-mv scoring is disabled when the reference frame
differs in resolution from the current frame.
Change-Id: Id4dc3e5e6692de98d9857fd56bfad3ac57e944ac
This patch allows coding frames using references of different
resolution, in ZEROMV mode. For compound prediction, either
reference may be scaled.
To test, I use the resize_test and enable WRITE_RECON_BUFFER
in vp9_onyxd_if.c. It's also useful to apply this patch to
test/i420_video_source.h:
--- a/test/i420_video_source.h
+++ b/test/i420_video_source.h
@@ -93,6 +93,7 @@ class I420VideoSource : public VideoSource {
virtual void FillFrame() {
// Read a frame from input_file.
+ if (frame_ != 3)
if (fread(img_->img_data, raw_sz_, 1, input_file_) == 0) {
limit_ = frame_;
}
This forces the frame that the resolution changes on to be coded
with no motion, only scaling, and improves the quality of the
result.
Change-Id: I1ee75d19a437ff801192f767fd02a36bcbd1d496
Some minor refactoring code relating to estimates of
bits per MB at a given Q and estimating the allowed Q range.
Most of the changes here were included in a previous commit.
This commit seeks to separate out the refactoring from more
the material changes.
Two #define control flags have been added for experimentation.
ONE_SHOT_Q_ESTIMATE force the two pass encoder to
use its initial Q range estimate for the whole clip even if this results
in a miss on the target data rate. In effect this tightens the Q range
seen at the expense of rate control accuracy.
DISABLE_RC_LONG_TERM_MEM is a related flag that disables the
long term memory in the rate control. Local adjustments are still
made to try and better hit the rate target on a per frame basis but
the impact of rate control misses is not propagated to the remainder
of the clip. This means that for example an overshoot early on will not
cause frames later in the clip to be starved of bits. Again the result
of this relaxation amy be less rate control accuracy especially on short
clips.
The flags are disabled by default for now.
Change-Id: I7482f980146d8ea033b5d50cc689f772e4bd119e
The over quant code was added in VP8 post
bitstream freeze to allow compression to lower
data rates
In VP9 the real qualtizer range has been greatly
extended anyway.
Change-Id: I5d384fa5e9a83ef75a3df34ee30627bd21901526
The issue that potentially broke the encoding process was due to the fact
that the length of token link is calculated from the total number of tokens
coded, while it is possible, in high bit-rate setting, this length is
greater than the buffer length initially assigned to the cpi->tok.
This patch increases the initially allocated buffer length assigned to
cpi->tok from
(mb_rows * mb_cols * 24 * 16) to (mb_rows * mb_cols * (1 + 24 * 16)).
It resolves the buffer overflow problem.
Change-Id: I8661a8d39ea0a3c24303e3f71a170787a1d5b1df
The commit changes the coding mode to lossless whenever the lowest
quantizer is choosen.
As expected, test results showed no difference for cif and std-hd
set where Q0 is rarely used. For yt and yt-hd set, Q0 is used for
a number of clips, where this commit helped a lot in the high end.
Average over all clips in the sets:
yt: 2.391% 1.017% 1.066%
hd: 1.937% .764% .787%
Change-Id: I9fa9df8646fd70cb09ffe9e4202b86b67da16765
These allow sending partial bitstream packets over the network before
encoding a complete frame is completed, thus lowering end-to-end
latency. The tile-rows are not independent.
Change-Id: I99986595cbcbff9153e2a14f49b4aa7dee4768e2
1. Added a bit in frame header to to indicate if a frame is encoded
in lossless mode, so decoder does not make the decision based on Q0
2. Minor changes to make sure that lossy coding works same as when
the lossless experiment is not enabled.
3. Renamed function pointers for transforms to be consistent, using
prefix fwd_txm and inv_txm for forward and inverse respectively
To encode in lossless mode, using "--lossless=1 --min-q=0 --max-q=0"
with vpxenc.
Change-Id: Ifae53b26d2ffbe378d707e29d96817b8a5e6c068
This is after discussion with the hardware team. Update the unit test
to take these sizes into account. Split out some duplicate code into
a separate file so it can be shared.
Change-Id: I8311d11b0191d8bb37e8eb4ac962beb217e1bff5
Experimental tweaks to various thresholds to measure
quality / speed trade off.
Add flag that allows static segmentation to be turned off
and disables it unless in the second pass of a two pass
encode.
Change-Id: I219702ffe858412a83db801cbbbd869924b8c61b
* changes:
Initial support for resolution changes on P-frames
Avoid allocating memory when resizing frames
Adds a test for the VP8E_SET_SCALEMODE control
Allows inter-frames to change resolution. Currently these are
almost equivalent to keyframes, as only intra prediction modes
are allowed, but without the other context resets that occur on
keyframes.
Change-Id: Icd1a2a5af0d9462cc792588427b0a1f5b12e40d3
As long as the new frame is smaller than the size that was originally
allocated, we don't need to free and reallocate the memory allocated.
Instead, do the allocation on the size of the first frame. We could
make this passed in from the application instead, if we wanted to
support external upscaling.
Change-Id: I204d17a130728bbd91155bb4bd863a99bb99b038
Tests that the external interface to set the internal codec scaling
works as expected. Also updates the test to pull the height from
the decoded frame size rather than parsing the keyframe header,
in anticipation of allowing resolution changes on non-keyframes.
Change-Id: I3ed92117d8e5288fbbd1e7b618f2f233d0fe2c17
Added switches and code to skip/breakout from
doing SB32 and SB64 tests based on whether
the 16x16 MB tests used split modes. Also to
optionally skip 64x64 if 16x16 was chosen over
32x32.
Impact varies depending on clip from a few %
up to almost 50% on encode speed. Only the
split mode breakout is currently enabled.
Change-Id: Ib5836140b064b350ffa3057778ed2cadcc495cf8
This patch adds column-based tiling. The idea is to make each tile
independently decodable (after reading the common frame header) and
also independendly encodable (minus within-frame cost adjustments in
the RD loop) to speed-up hardware & software en/decoders if they used
multi-threading. Column-based tiling has the added advantage (over
other tiling methods) that it minimizes realtime use-case latency,
since all threads can start encoding data as soon as the first SB-row
worth of data is available to the encoder.
There is some test code that does random tile ordering in the decoder,
to confirm that each tile is indeed independently decodable from other
tiles in the same frame. At tile edges, all contexts assume default
values (i.e. 0, 0 motion vector, no coefficients, DC intra4x4 mode),
and motion vector search and ordering do not cross tiles in the same
frame.
t log
Tile independence is not maintained between frames ATM, i.e. tile 0 of
frame 1 is free to use motion vectors that point into any tile of frame
0. We support 1 (i.e. no tiling), 2 or 4 column-tiles.
The loopfilter crosses tile boundaries. I discussed this briefly with Aki
and he says that's OK. An in-loop loopfilter would need to do some sync
between tile threads, but that shouldn't be a big issue.
Resuls: with tiling disabled, we go up slightly because of improved edge
use in the intra4x4 prediction. With 2 tiles, we lose about ~1% on derf,
~0.35% on HD and ~0.55% on STD/HD. With 4 tiles, we lose another ~1.5%
on derf ~0.77% on HD and ~0.85% on STD/HD. Most of this loss is
concentrated in the low-bitrate end of clips, and most of it is because
of the loss of edges at tile boundaries and the resulting loss of intra
predictors.
TODO:
- more tiles (perhaps allow row-based tiling also, and max. 8 tiles)?
- maybe optionally (for EC purposes), motion vectors themselves
should not cross tile edges, or we should emulate such borders as
if they were off-frame, to limit error propagation to within one
tile only. This doesn't have to be the default behaviour but could
be an optional bitstream flag.
Change-Id: I5951c3a0742a767b20bc9fb5af685d9892c2c96f
Update the code to call the new convolution functions to do subpixel
prediction rather than the existing functions. Remove the old C and
assembly code, since it is unused. This causes a 50% performance
reduction on the decoder, but that will be resolved when the asm for
the new functions is available.
There is no consensus for whether 6-tap or 2-tap predictors will be
supported in the final codec, so these filters are implemented in
terms of the 8-tap code, so that quality testing of these modes
can continue. Implementing the lower complexity algorithms is a
simple exercise, should it be necessary.
This code produces slightly better results in the EIGHTTAP_SMOOTH
case, since the filter is now applied in only one direction when
the subpel motion is only in one direction. Like the previous code,
the filtering is skipped entirely on full-pel MVs. This combination
seems to give the best quality gains, but this may be indicative of a
bug in the encoder's filter selection, since the encoder could
achieve the result of skipping the filtering on full-pel by selecting
one of the other filters. This should be revisited.
Quality gains on derf positive on almost all clips. The only clip
that seemed to be hurt at all datarates was football
(-0.115% PSNR average, -0.587% min). Overall averages 0.375% PSNR,
0.347% SSIM.
Change-Id: I7d469716091b1d89b4b08adde5863999319d69ff
Separate out code to set the main encode speed
related rd thresholds. Some values changed from
the initial defaults for various new modes.
Quality test results pending but even the addition
of some further non-zero defaults helps encode speed
somewhat in limited testing on derf clips.
Adjustment of thresholds for quality / speed tradeoff
to follow.
Change-Id: I117ee473157e151a1b93193d5f393449328de20d
First step in simplifying the segment mode and
segment EOB flags into a simpler segment skip
flag that implies 0,0 mv and EOB at position 0.
Change-Id: Ib750cac31a7a02dc21082580498efd9f7d8d72a5
Adds a flag to disable features that would inhibit frame parallel
decoding. This includes backward adaptation and MV sorting based
on search in ref frame buffer.
Also includes some minor clean-ups.
Change-Id: I434846717a47b7bcb244b37ea670c5cdf776f14d
Adds an error-resilient mode where frames can be continued
to be decoded even when there are errors (due to network losses)
on a prior frame. Specifically, backward updates are turned off
and probabilities of various symbols are reset to defaults at
the beginning of each frame. Further, the last frame's mvs are
not used for the mv reference list, and the sorting of the
initial list based on search on previous frames is turned off
as well.
Also adds a test where an arbitrary set of frames are skipped
from decoding to simulate errors. The test verifies (1) that if
the error frames are droppable - i.e. frame buffer updates have
been turned off - there are no mismatch errors for the remaining
frames after the error frames; and (2) if the error-frames are non
droppable, there are not only no decoding errors but the mismatch
PSNR between the decoder's version of the post-error frames and the
encoder's version is at least 20 dB.
Change-Id: Ie6e2bcd436b1e8643270356d3a930e8989ff52a5
This commit restores the quality lost when the buffer-to-buffer copy
logic was removed. Note that this is specific to the current use of
golden frames and will need rework when RTC functionality is added.
Change-Id: I7324a75acd96eafd9e0f9b8633d782e390d5dc21
Previously there were two frame coding contexts tracked, one for normal
frames and one for alt-ref frames. Generalize this by signalling the
context to use in the bitstream, rather than tieing it to the alt ref
refresh bit. Also increase the number of contexts available to 4, which
may be useful for temporal scalability.
Change-Id: I7b66daaddd55c535c20cd16713541fab182b1662
Remove lst_fb_idx, gld_fb_idx, alt_fb_idx, refresh_last_frame,
refresh_golden_frame, refresh_alt_ref_frame from common. Gold/Alt are
encode side conventions. From the decoder's perspective, we want to be
dealing with numbered references.
Updates to active_ref 2 signal mode context switches, vestigial from
refresh_alt_ref_frame. This needs some clean up to make sense with
increased numbers of reference frames, as well as reimplementing the
swapping of alt/golden which was previously done using the
buffer-to-buffer copy mechanism removed in an earlier commit.
Change-Id: I7334445158b7666f9295d2a2dd22aa03f4485f58
Do reference counting the same way on the encoder as the decoder does,
rather than maintaining the 'flags' member of YV12_BUFFER_CONFIG.
Change-Id: I91dc210ffca081acaf9d5c09a06e7461b3c3139c
This is the first in a series of commits to add additional reference
frames to the codec. Each frame will be able to update any of the
available references, but copying between references is not
supported.
Change-Id: I5945b5ce6cc3582c495102b4e7eed4f08c44d5a1
These variables have the type int64_t, not long long. long long could
be a larger type than 64 bits. Emulate INT64_MAX for older versions of
MSVC, and remove the unreferenced vpx_ports/vpxtypes.h
Change-Id: Ideaca71838fcd3849d816d5ab17aa347c97d03b0
Jingning Han
Yaowu Xu
Dmitry Kovalev
John Koleszar
Ronald S. Bultje
Paul Wilkins
Deb Mukherjee
Adrian Grange