As a precursor to encoding 32x32 blocks this cl adds the
ability to encode the frame superblock (=32x32 block) at
a time. Within a SB the 4 indiviual MBs are encoded in
raster-order (NW,NE,SW,SE).
This functionality is added as an experiment which can be
enabled by ispecifying --enable-superblocks in the
command line specified to configure (CONFIG_SUPERBLOCKS
macro in the code).
To make this work I had to disable the two intra
prediction modes that use data from the top-right of the
MB.
On the tests that I have run the results produce
almost exactly the same PSNRs & SSIMs with a very
slightly higher average data rate (and slightly higher
data rate than just disabling the two intra modes in
the original code).
NOTE: This will also break the multi-threaded code.
This replaces the abandoned change:
Iebebe0d1a50ce8c15c79862c537b765a2f67e162
Change-Id: I1bc1a00f236abc1a373c7210d756e25f970fcad8
Commented out changes from earlier checking:
"Change Iab7f1eff: vpnext use segref segmentation filter"
Which in its current state breaks the decoder.
Change-Id: I9185098aeda8ce65310f338c4c9375f4a39005d3
The bug was introduced by the commit that added I8X8 intra prediction
mode for inter frames, the decoder was not update to accept the additional
probability update from encoder. This causes the decoder typicall to crash
when encoder sends intra mode probability update.
Change-Id: Ib7dc42dc77a51178aa9ece41e081829818a25016
This check in uses the common prediction interface functions
to code reference frame.
Some updates made regarding the impact of the new code in rd loop
but there remain TODOs in this regard.
Change-Id: I9da3ed5dfdaa489e0903ab33258b0767a585567f
This does not change any functionality just modifies the code to
use the common prediction module interface for coding
the segment data.
Change-Id: Ifd43e9153573365619774a4f5572215e44fb5aa3
This function adds the common prediction modules, some data structures
and a config option but does not use them.
It also corrects a bug in clearing down the MODE_INFO border and introduces
a new element that indicates if an entry corresponds to an "in image" macro block
or is part of the border.
Change-Id: Ib69eec0876173ebe9d1de9df9537d0b2447702e0
Picks a per segment loopfilter. Adapts the algorithm to search for
a loopfilter value for each separate segment. Further todo fix the
bias
Improvements .06 % ov psnr, .11% ssim
http://www.corp.google.com/~jimbankoski/no_crawl/segmentedpicklpf.html
Change-Id: Ic6a571c16fcd6ec0139f4de1f8061f87c6515a10
changed the token cost for 8x8 transformed macroblock used in trellisquant
from those derived from 4x4 transform coefficient distribution to those
derived from 8x8 transform coefficient distribution. Test results show
this fix help 8x8 transform based compression consistently on cif and hd
sets:
http://www.corp.google.com/~yaowu/no_crawl/t8x8/cif_cost8x8only.html
(avg psnr:.14% glb psnr: .17% ssim: .20%)
http://www.corp.google.com/~yaowu/no_crawl/t8x8/hd_cost8x8only.html
(avg psnr:.17% glb psnr: .18% ssim: .58%)
Note: To test the effect of this change, 8x8 transform was forced to be used
only on 16x16 predicted macroblocks on inter frames, the effect would be
bigger had all macroblocks been forcd to use 8x8 transform.
Change-Id: If9b7868b75357c66541f511e5ee78e4d2d4929a4
using an 8-tap filter.
The results with 3 different 8-tap filters on the derf set are in:
http://www.corp.google.com/~debargha/vp8_results/enhinterp.html
The one that gives the most gain achieves an overall gain of about
0.6%. The results for a set of 12 hd (720p) videos are in:
http://www.corp.google.com/~debargha/vp8_results/enhinterp_hd.html
with max gain of 0.55% with the same filter. The best filter apparently
achieves the best trade-off between pass band ripple and stop band
attenuation.
Change-Id: I919e28ae245c0493147fa0864f8c9d048a9dd530
This introduces base functions for introducing implicit segmentation.
The code that actually stores the results to the segment map isn't
here yet. This just prints out the segmentation map results
if you call it.
Uses connected component labeling technique on mbmi info so that only
if 2 mbs are horizontally or vertically touching do they get the same
segment.
vp8next - plumbing for rotation
code to produce taps for rotation ( tapify. py ), code
for predicting using rotation ( predict_rotated.c ) , code
for finding the best rotation find_rotation.c.
didn't checkin code that uses this in the codec. still work
in progress.
Fixed copyright notice
Change-Id: I450c13cfa41ab2fcb699f3897760370b4935fdf8
This commit added a set of loop filter functions for macroblocks
using 8x8 transform. First we turned off the regular loop filtering
on 4x4 block boundaries that do not exist in macroblocks using 8x8
transform. Second, we change to use the same loop filter(mask and
7 tap filter) that used for macroblock edge filtering.
Change-Id: I3a00460b7674ced116917d86812ffc32578c1d3a
This fixed a conflict introduced by the change of adding 8x8 intra
prediction modes. The 8x8 intra prediction mode code assumed the
use of 4x4 transform, and causes encoder crashes when the codec is
configured with --enable-t8x8.
Change-Id: I00cc94df63e9725377ffba9eb51be6b77fe3fcf9
commit cf561bad accidentally deleted a line of code that sets the
base_qindex for each frame, which leads to every frame is encoded
at Q of 0.
Change-Id: Ib5f8022e856bf3b3bd0d4147405e46241e3dcf2d
The commit adds a new set of loop filter for macroblock edge filtering.
The new loop filter has a mask to detect so-called "flat" regions. The
detection checks 5 pixels of each side of an edge. If the all pixels
have value with +/-1 from the edge pixel on the same side, the region
is treated as a "flat" region. For such case, a 7 tap filter is used
to change 3 pixel values on each side. The 7 taps are:
[1, 1, 1, 2, 1, 1, 1]/8
The furthest away pixels used as input are +/-5 away from edge. For
non-flat region, we fall back to old filtering. It should be noted
here that the thresholds and filter taps may require more optimization
for best possible results.
Tests on a set of hd clips showed consistent gains:
http://www.corp.google.com/~yaowu/no_crawl/mblpf_hd.html
(avg psnr: .83% glb psnr: .77% ssim: .82%)
Tests on derf set also showed consistent gains:
http://www.corp.google.com/~yaowu/no_crawl/mblpf_derf.html
(avg psnr: .24% glb psnr: .22% ssim: .48%)
Change-Id: I0855b1ff48e79e1175c20b81967137e18b2af352
A problem can arise on static clips with force key frames where
attempts to avoid popping lead to a progressive reduction in key
frame Q that ultimately may lead to unexpected overspend against
the rate target.
The changes in this patch help to insure that in such clips the
quality of the key frames across the clip is more uniform (rather
than starting bad and getting better - especially at low target rates).
This patch also includes a fix that removes a delta on the Y2DC
when the baseline q index < 4 as this is no longer needed.
There is also a fix to try and prevent repeat single step Q adjustment in
the recode loop leading to lots of recodes, especially where the use
of forced skips as part of segmentation has made the impact of Q on
the number of bits generated much smaller.
Patch 2: Amend "last_boosted_qindex" calculation for arf overlay frames.
Change-Id: Ia1feeb79ed8ed014e4239994fcf5e58e68fd9459
In certain hardware configuration, where mmx code is enabled and
other simd (sse2/sse3) disabled, lacking of this emms caused invalid
internal stats outputs.
Change-Id: I77c61cf6e0448d3f3b8c11781aa9e42f31d231c9
Previously, the mode context is always udpated based on stats of current
frame, when there is no count, 50% is used for both left and right branch.
However, it is observed that with such strategy, a small count or no count
at all can skew the probability distribution significantly. This commmit
changed the mode_context update strategy to prevent small counts from
skewing the probability distributions.
Tests on derf set showed a small gain: .06% in psnr and .09% in ssim
Change-Id: Ic812e64ae5f70251c170b0717f7b7fa587055488
This commit extends the number of Q steps to 256 from 128.
The q_trans[] array has been altered to distribute available Q index values
(using the current 64 steps available as input parameters) evenly across the
available range. This is coupled with the fact that each Q step where possible
now equates to a fixed % change in the quantizer. This may want refinement
later especially in terms of the granularity at the high quality end but is a
reasonable starting point.
Change-Id: I2aaa6874fa10ce05c958dd182947ce39f6f1eecb
High Q end extended a little.
Some clean up.
Slightly better on SSIM, Slightly worse on PSNR over derf set.
Change-Id: I3dceea8a39e11c26e1a389a40e40b86efc76d28c
Added code to support 256 index steps instead of 128 but disabled for now.
Replace hard wired table vp8cx_base_skip_false_prob[128]
Observed Qindex problem with setting minimum loop filter value.
(Experiment code using real Q in place but for now just returning 0. This has a big
beneficial effect on some clips, particularly waterfall which shows 5% ssim gain)
Change-Id: I2f7117de8adc1797164c106aa13effc900a1467e
Whilst the encoder explicitly set the segment_id to 0
when segmentation is diabled, the decoder would allow
the segment_id to persist from the previous frame.
This fix attempts to make the decoder behave the same
as the encoder by explicitly setting the segment_id to
0 in this case.
Change-Id: I65c3a05247550edb10706eb5d54d306dfb792309
mode_info_context is padded with an additional column of data, so
mode_info_stride should be used to move between rows rather than
mb_cols.
Change-Id: I598559a2cd9df1c486d64aaeccf76b76a7ecf21c
Both encoder & decoder were using mb_cols to
offset from one row of MODE_INFO structures to the next
when they should have been using mode_info_stride.
Fixing this in both encoder and decoder gives around
a 3KB size saving and 0.025dB PSNR improvement on the one
720P clip I tried.
(Also removed "index" which was being updated but not used)
Change-Id: I413bea802b142886bfcf8d8aa7f5a2f0c524fd4b
Removed a couple more fixed tables for the extended quantizer experiment
that depend on QINDEX_RANGE.
Change-Id: I2c15ffc7488c2a2b8d6504e2c4b6b2339799d117
Previously, Y-adaptive UV intra coding only enabled on key frames in
UVINTRA experiment. This commit enabled the same coding for inter
frames, so the encoding of UV intra modes are consistent cross all
frame types. Tests on derf set showed a very small overall gain around
.04%:
http://www.corp.google.com/~yaowu/no_crawl/interUVintra.html
The gain looks to be reasonable given inta coded MBs is only a
small portion of MBs in inter frames.
Change-Id: Ic6fc261923f2c253f4a0c9f8bccf4797557b9e16
update_mbgraph_frame_stats used xd->mode_info_context
before it had been setup, resulting in potentially
random accesses of uninitialized memory.
This fix allocates a local MODE_INFO structure to hold
the data generated in the function.
Change-Id: Ic9e75610008ce0e2d690e8e583c21582fee6fc45
A previous commit 76feb965 made the vp8_mode_context adaptive on a frame
frame basis, this commit further made the coding context adaptive to two
frame types separately. Tests on derf set showed a further small gain on
all metrics: avg psnr 0.10%, glb psnr: 0.11%, ssim: 0.08%
http://www.corp.google.com/~yaowu/no_crawl/newNearMode_1209.html
Change-Id: I7b3e32ec8729de1903d14a3f1213f1624b78cdee
Adrian Grange
Paul Wilkins
Yaowu Xu
Author: John Koleszar
Scott LaVarnway
Deb Mukherjee
Jim Bankoski
Christian Duvivier