Used horizonal add instructions instead of adding
byte lanes. The encoder performance improved by
~4% for the test clip used.
Change-Id: Iaddd10403fcffb5b3f53b1f591ab2fe0ff002c08
This patch did a cleanup following the commit "Save NEON registers
in VP8 NEON functions". The pushing/poping of callee-saved NEON
registers was moved into individual NEON functions. Therefore,
we don't need to save those registers at the beginning of codec.
The related code was removed.
Change-Id: I5648166514fc9beffb780aa138495597731f49ea
The recent compiler can generate optimized code that uses NEON registers
for various operations besides floating-point operations. Therefore,
only saving callee-saved registers d8 - d15 at the beginning of the
encoder/decoder is not enough anymore. This patch added register saving
code in VP8 NEON functions that use those registers.
Change-Id: Ie9e44f5188cf410990c8aaaac68faceee9dffd31
Removing all copies of identical vp8_mse2psnr/vp9_mse2psnr functions.
Using vpx_sse_to_psnr() instead in all places.
Change-Id: I15beef9834d43d8fc8a8a7a2d1fc5de3d658fed8
Under a configuration change, where the bitrate suddenly decreases,
the buffer level may be larger than maximum allowed (for that first frame to be encoded after change_config).
This change keeps it clipped to its maximum level.
Change-Id: I4d0b5b3d1fd8148600dd39e02bd630c9464baba5
There were two problems with the format string in
the conditionally compiled print statement. It referred
to a variable that is no longer available and it used
incorrect format specifiers.
Change-Id: I315e22bea2691bb535a2e33f5ca206fc55287a37
When a frame is dropped due to |buffer_level| < 0 for a given temporal layer,
the buffer level for the upper temporal layers was not updated (in calc_pframe_target_size()).
This change fixes that.
Also, use the layer per-frame-bandwidth for updating the buffer level
of the higher layers when a frame is dropped.
Change-Id: I660c23f3229b47e9d124a950b480314b4307c5a8
coef_counts is now in cpi->mb, instead of cpi. The commit corrected the
mis-use and enable succefual build.
Change-Id: I0e77909d34571cfd2560c66b46b1f8fa0cd1a6b4
Jenkins warns on left shift of negative numbers and non-aligned read
of int. This commit fixed the two issues.
Change-Id: I389a7fb6a572c643902e40a4c10fefef94500d2c
these are only used in the encoder.
frames_since_golden / frames_till_alt_ref_frame -> VP[89]_COMP
Change-Id: Ie14a6f46987bced685ddb449b85dc261caba6dfe
this was never fleshed out in the context of VP8, for which it was
added. for VP9 it has no meaning.
Change-Id: Iba2ecc026d9e947067b96690245d337e51e26eff
If the codec was configured with --enable-internal-stats,
a seg fault would occur. This patch fixes the problem.
Change-Id: Id10a577973d185e93037c59e5b36bebdded327da
Condition the existing zbin boost logic for gf/altf mode to temporal layers==1,
since gf/altf reference frames are used in temporal layers as reference frames.
Change-Id: I618bb20730e5f193e078215d06f54997c363dd7b
Use a separate counter for resetting the pattern upon
a change in temporal layers, and set/initialize the
layer context parameters for the new temporal layer state.
Also moved the setting of layer configuation in init_config()
to a separate function.
Change-Id: Ic7fc023a1e5490020509e107004645098f4c00f0
Conflicts:
vp9/common/vp9_findnearmv.c
vp9/common/vp9_rtcd_defs.sh
vp9/decoder/vp9_decodframe.c
vp9/decoder/x86/vp9_dequantize_sse2.c
vp9/encoder/vp9_rdopt.c
vp9/vp9_common.mk
Resolve file name changes in favor of master. Resolve rdopt changes in
favor of experimental, preserving the newer experiments.
Change-Id: If51ed8f457470281c7b20a5c1a2f4ce2cf76c20f
The only reason for the _intrinsics part of the file name was for the
interim period where only one of the functions was redone and the base
file name was the same.
Change-Id: I7851154f1633d48821bee885b1cadb2148e65a23
This is work-in-progress, it implements multiple ARF
encoding behind an experimental flag.
It adds the ability to insert multiple ARF frames into a
single ARF group. This patch implements the reordering
of the coded frames, and implements a fixed-length coding
pattern. It applies a fixed quantizer strategy based on
where the frame is in the coding sequence.
Further work to modify the rate control strategy is
ongoing and will be submitted via a set of future patches.
In this first step, each ARF group is recursively
bisected and an ARF frame added at that position in the
sequence. The recursion continues until ARF frames are
within MIN_GF_INTERVAL frames.
The code sits behind the "multiple-arf" experimental
flag ("CONFIG_MULTIPLE_ARF"). The experimental flag
"oneshotq" ("CONFIG_ONESHOTQ") also needs to be enabled
for this patch to work correctly.
Change-Id: Ie473b05ebb43ac473c0cfb659b2b8042823085e2
Use local variable for setting the improved prediction mode.
cpi->sf.improved_mv_pred is set/fixed at the frame level
and should not be changed inside pick_inter_mode.
Change-Id: Ie28d9171ac000e631af0e30204970e3d4fff3078
Pick up VP8 encryption, quantization changes, and some fixes to vpxenc
Conflicts:
test/decode_test_driver.cc
test/decode_test_driver.h
test/encode_test_driver.cc
vp8/vp8cx.mk
vpxdec.c
vpxenc.c
Change-Id: I9fbcc64808ead47e22f1f22501965cc7f0c4791c
and denoising.c
Adding -Wshadow to CFLAGS generated a bunch of warnings. This patch
removes these warnings.
Change-Id: I434a9f4bfac9ad4ab7d2a67a35ef21e6636280da
ratectrl.c and quantize.c
Adding -Wshadow to CFLAGS generated a bunch of warnings. This patch
removes these warnings.
Change-Id: I8c8faa9fde57c1c49662d332a90bc8d9a0f4a2ce
Remove dependency of this function on asm_offsets. ssse3/sse4 next.
Change quant_shift calculation so it be done using SIMD. Pre-calculate
as much as possible to simplify EOB selection.
Take advantage of qcoeff being zero'd by tying the if statements
together.
Speed parity with previous implementation with gcc x86_64 linux
Change-Id: Ife97556a1eca3a74b09def1a3d04084974dff1fb
Reduce dependency on offsets file by using intrinsics. Disassembly shows
improvements over previous assembly specifically in register management,
preloading, and {pro,epi}log. Speed change is within margin of error.
Change-Id: I8131b4b4d62bc092407fe847bfaa8f2c0e1384ff
When error concealment is enabled, it swaps the mi and prev_mi ptrs after
each frame is decoded. The postproc uses the mi ptr for the mode info context.
Now the postproc will use the correct mode info context.
Change-Id: I537ae5450f319c624999b44525bb52bb30047b7b
Reduce the delta loop filter for blocks that are cyclicly refreshed.
This helps to reduce the dot artifacts that may happen
when zero_mv blocks are repeatedly loop-filtered.
This change, along with the fix in:
https://gerrit.chromium.org/gerrit/#/c/40409/
helps to reduce this artifact, but cannot remove the dot artifacts completely.
Change-Id: I44675e7a0f59295b648a3b7d4956fb301231a97f
The MAX_PSNR was used to assign a "psnr" number when the mse is close
to zero. The direct assignment is used to prevent divide by zero in
computation. Changing it from 60 to 100 to be consistent against what
is being done in VP9
Change-Id: I4854ffc4961e59d372ec8005a0d52ca46e3c4c1a
WIP: Fixing unsafe threading in VP8 encoder.
Use the passed in macroblock instead of the macroblock located in
cpi.
Change-Id: I1bfa07de6ea463f2baeaae1bae5d950691bc4afc
The loopfilter thread from the previous frame can be running while
starting the current frame. cpi->Source will change during this time causing
the wrong data to be copied. The refresh_x_frame flags also change, which
will cause incorrect updates of the denoised buffers.
Change-Id: I7d982b4fcb40a0610801332aa85f3b792c64e4c3
The denoiser was writing to LAST_FRAME buffer. If LAST_FRAME isn't being
updated, the reference frame buffers were out of sync between the encoder and the
denoised raw buffers. This patch resolves the discrepancy by always writing to a work
buffer (INTRA_FRAME) and then copying from that buffer to any buffers that needs to
be updated.
Change-Id: I6dd855b9749978b542bc3d515914d5f16faf25df
Multi-threaded code was not updated to disable background
refresh for non base-layer frames at the time it was
disabled in the main C-code.
Change-Id: Id6cc376130b7def046942121cfd0526b4f0a71d4
Don't use the switch to gf_rate_correction factor when
temporal layers is used (i.e., cpi->oxcf.number_of_layers > 1).
In temporal layers, we prefer to avoid this as any frame
(e.g., base layer frame at anchor of pattern) may update
both last and golden (and possibly alt-ref), and so we would get
different rate correction factors within the same layer.
This change will make sure one rate correction factor exists for each layer.
Also, made some other code in qp-regulate that depends on
alt/golden update specific to the 1 layer case.
Change-Id: I41a6d085bd477f9307ef3b3c311695214273892c
Creates a merge between the master and experimental branches. Fixes a
number of conflicts in the build system to allow *either* VP8 or VP9
to be built. Specifically either:
$ configure --disable-vp9 $ configure --disable-vp8
--disable-unit-tests
VP9 still exports its symbols and files as VP8, so that will be
resolved in the next commit.
Unit tests are broken in VP9, but this isn't a new issue. They are
fixed upstream on origin/experimental as of this writing, but rebasing
this merge proved difficult, so will tackle that in a second merge
commit.
Change-Id: I2b7d852c18efd58d1ebc621b8041fe0260442c21
Most of these were picked up by jenkins in the commit that changed
the vp8 namespace to vp9 in common/.
Change-Id: I5cbd56ffc753b92ef805133cda6acc1713a13878
For non-static functions, change the prefix to vp9_. For static functions,
remove the prefix. Also fix some comments, remove unused code or unused
function prototypes.
Change-Id: I1f8be05362f66060fe421c3d4c9a906fdf835de5
Most of these were picked up in the previous commit (prefix change from
vp8_ to vp9_), but I'm pushing this separately so that it's easier to
review.
Change-Id: I91e959895778b8632d7d33375523df8a7568a490
Converted the forward and inverse transforms to integer forms.
Modify #define TEST_INT 1/0
in the code to call integer/float version of transforms.
The tests showed that average OVERALL PSNR loss was less than 0.1%.
Change-Id: I1dfa4eeab6412597e3b970ce299cf0e116a917e6
Preparation for project restructuring.
Added vp9_ prefix on some function names that have global scope.
Added static declaration on some that dont.
Change-Id: If072f78b4300e8c17cfeed82c5d17b59946dcc5e
Previously, in evaluating reference motion vectors, MVs are always
rounded to integer pixel position and SADs are calculated. This
commit takes into account the subpixel portion of the mvs, and uses
bilinear interpolation to produce reference pixel values in subpixel
postions. In addition, SSE is used in place of SAD. Pixels used are
16x2 above and 2x16 to the left.
This commmit intends to test the potential of this line of work in
term of compression improvement, obviously, the change would increase
decoder complexity significantly.
Test results
std-hd: 1.738%(avg) 1.779%(glb), 1.663%(ssim)
derf: 0.472%(avg) 0.477%(glb), 0.418%(ssim)
Change-Id: I3ae1b098f6289df78891134d9a5e4bb2fde87a0b
Cleaned up some inconsistent references using both xd-> and
x->e_mbd. to access the same data structure in the same function.
Change-Id: Ieb496fa22bf1feec6aa7bc70b941ea4f16e0f8b5
Coding and costing of mv reference signal.
Issues in updating MV ref with COMPANDED_MVREF_THRESH
to be resolved. Ideally the MV precision should be defined based
on absolute MV magnitude not as now the MV ref magnitude.
Update to mv counts moved into bitstream.c because otherwise
if the motion reference is changed at the last minute the encoder
and decoder get out of step in terms of the counts used to update
entropy probs.
Code working on a few test clips but no results yet re benefit vs
signaling cost and no tuning of red loop to test lower cost alternatives
based on the available reference values.
Patch 3. Added check to make sure we don't pick a reference
that would give rise to an uncodeable / out of range residual.
Patch 6-7: Attempt to rebase. OK to submit but best to leave flag off for now.
Patch 9. Remove print no longer needed.
Change-Id: I1938c2ffe41afe6d3cf6ccc0cb2c5d404809a712
Refactor per-transform copy & paste into a common function
update_coef_probs_common() and read_coef_probs_common(). The dry-run and
bit-writing loops in the encoder are still obvious candidates to be made
common, but they start to diverge a bit in the next commit, so are left
as-is for now.
Change-Id: I896bd3f4a073a6296eab7e92463fef79d8c6c08c
There is a macro DEFAULT_INTERP_FILTER defined in encoder/onyx_if.c that
is set as EIGHTTAP for now - so SWITCHABLE is not really used. Ideally,
this should be SWITCHABLE but that would make the encoder quite a bit slower.
We will change the default filter to SWITCHABLE once we find a faster way to
search for switchable filters.
Change-Id: Iee91832cdc07e6e14108d9b543130fdd12fc9874
* changes:
Fix another typo in 4x4-transform-for-i8x8-intra-pred coeff contexts.
8x8 transform support in splitmv.
Use SPLITMV_PARTITIONING instead of a plain integer type.
For splitmv, where partitioning is 8x16, 16x8 or 8x8, this patch
uses the 8x8 transform (instead of the 4x4) if txfm_mode is
ALLOW_8X8 or ALLOW_16X16. For TX_MODE_SELECT, splitmv can indicate
which of the 2 transform sizes (4x4 or 8x8) it wants to use.
Gains (with hybridtx4x4/8x8/16x16 and tx_select experiments
enabled) on derf: +0.9%, HD: +0.4%, STD/HD: +0.8% (SSIM or overall
PSNR, both metrics show similar improvements).
Change-Id: Ide954b000b415548ed92a7ac78e24f36e60fcf06
This can be used to distinguish between 16x8, 8x16, 8x8 and 4x4
partitioning modes when choosing splitmv as a MB mode.
Change-Id: Idc8b59772e1a80ccc4ad44d63c5c2ec3fc061a3c
Johann
Scott LaVarnway
Yunqing Wang
Joey Parrish
Sergey Ulanov
James Zern
Dmitry Kovalev
Adrian Grange
Tom Finegan
Martin Storsjo
Marco Paniconi
Christian Duvivier
Jim Bankoski
Yaowu Xu
Frank Galligan
John Koleszar
Shimon Doodkin
Ronald S. Bultje
Jan Kratochvil
Johann
Paul Wilkins
Deb Mukherjee
pascal massimino