* Dering and clpf were merged into a single pass.
* 32x32 and 128x128 filter block sizes for clpf were removed.
* RDO for dering and clpf merged and improved:
- "0" no longer required to be in the strength selection
- Dering strength can now be 0, 1 or 2 bits per block
LL HL
PSNR: -0.04 -0.01
PSNR HVS: -0.27 -0.18
SSIM: -0.15 +0.01
CIEDE 2000: -0.11 -0.03
APSNR: -0.03 -0.00
MS SSIM: -0.18 -0.11
Change-Id: I9f002a16ad218eab6007f90f1f176232443495f0
CLPF performance had degraded by about 0.5% over the past six months,
which isn't totally surprising since the codec is a moving target.
About half of that degradation comes from the improved 7 bit filter
coefficients. Therefore, CLPF needs to be retuned for the current
codec.
This patch makes two (normative) changes to the CLPF kernel:
* The clipping function was changed from clamp(x, -s, s) to
sign(x) * max(0, abs(x) - max(0, abs(x) - s +
(abs(x) >> (bitdepth - 3 - log2(s)))))
This adds a rampdown to 0 at -32 and 32 (for 8 bit, -128 & 128
for 10 bit, etc), so large differences are ignored.
* 8 taps instead of 6 taps:
1
4 3
13 31 -> 13 31
4 3
1
AWCY results: low delay high delay
PSNR: -0.40% -0.47%
PSNR HVS: 0.00% -0.11%
SSIM: -0.31% -0.39%
CIEDE 2000: -0.22% -0.31%
APSNR: -0.40% -0.48%
MS SSIM: 0.01% -0.12%
About 3/4 of the gains come from the new clipping function.
Change-Id: Idad9dc4004e71a9c7ec81ba62ebd12fb76fb044a
This reverts commit 9b25f30674 to
reinstate the reverted commit with fixes that solved the build issues
when --enalbe-clpf is used in configure.
Change-Id: I15447cae7fa9b3deb27976345dc3db230a4a7a60
These signals were in the uncompressed frame header (as a temporary
hack), which caused two problems:
* We don't want that header to be duplicated in the slice header
* It was necessary to signal the number of bits to transmit up front
However, the filter size can be 128x128 which is greater than the SB
size, and a decoder wouldn't be able to know whether to read a bit or
not until the final SB of that 128x128 block has been decoded
(depending on whether the 128x128 is all skip or not). Therefore the
signalling was changed for 128x128 blocks so that every top left SB of
a 128x128 filter block contains a signal regardless of whether the
block is all skip or not. Also, all the MB's of 128x128 block are
filtered even if they are skip MB's. This gives the signal a purpose
even when the 128x128 block is all skip, and it also gives a slight
coding gain as it leaves a way to filter skip blocks, which was
previously forbidden.
Low latency:
PSNR YCbCr: -0.19% -0.14% -0.06%
PSNRHVS: -0.15%
SSIM: -0.13%
MSSSIM: -0.15%
CIEDE2000: -0.19%
High latency:
PSNR YCbCr: -0.03% -0.01% -0.09%
PSNRHVS: 0.04%
SSIM: 0.00%
MSSSIM: 0.02%
CIEDE2000: -0.02%
Change-Id: I69ba7144d07d388b4f0968f6a53558f480979171
* Move clipping tests from inside to outside loops
* Let sizex and sizey to clpf_block() be the clipped block size rather
than both just bs
* Make fallback tests to C more accurate
Change-Id: Icdc57540ce21b41a95403fdcc37988a4ebf546c7
When CLPF was extended to chroma, the chroma RDO accidentally
discarded the optimal block size found in the luma RDO.
PSNR YCbCr: -0.25% 0.05% 0.06%
PSNRHVS: -0.19%
SSIM: -0.36%
MSSSIM: -0.23%
Conflicts:
av1/common/clpf.c
Change-Id: Ie49cd30f9276a311ada88cb2f13d14757617f030
av1_clpf_frame() was always called with the same src and dst,
so we only need one argument and the code supporting different
src and dst was removed.
Change-Id: I70919f50e5cfb19c22eb4dff9ee7c0fa2697fad3
Instead of having CLPF write to an entire new frame and
copy the result back into the original frame, make the
filter able to work in-place by keeping a buffer of size
frame_width*filter_block_size and delay the write-back
by one filter_block_size row.
This reduces the cycles spent in the filter to ~75%.
Change-Id: I78ca74380c45492daa8935d08d766851edb5fbc1
Cherry-Picked the following commits:
0defd8f Changed "WebM" to "AOMedia" & "webm" to "aomedia"
54e6676 Replace "VPx" by "AVx"
5082a36 Change "Vpx" to "Avx"
7df44f1 Replace "Vp9" w/ "Av1"
967f722 Remove kVp9CodecId
828f30c Change "Vp8" to "AOM"
030b5ff AUTHORS regenerated
2524cae Add ref-mv experimental flag
016762b Change copyright notice to AOMedia form
81e5526 Replace vp9 w/ av1
9b94565 Add missing files
fa8ca9f Change "vp9" to "av1"
ec838b7 Convert "vp8" to "aom"
80edfa0 Change "VP9" to "AV1"
d1a11fb Change "vp8" to "aom"
7b58251 Point to WebM test data
dd1a5c8 Replace "VP8" with "AOM"
ff00fc0 Change "VPX" to "AOM"
01dee0b Change "vp10" to "av1" in source code
cebe6f0 Convert "vpx" to "aom"
17b0567 rename vp10*.mk to av1_*.mk
fe5f8a8 rename files vp10_* to av1_*
Change-Id: I6fc3d18eb11fc171e46140c836ad5339cf6c9419
Steinar Midtskogen
Jean-Marc Valin
Yaowu Xu