Don't run rate_block (cost_coeffs) if distortion alone is enough to
surpass best_rd.
This decreases 2nd pass runtime on HD at speed 2 by about 2%. There is
zero effect on output if tx_cache is removed.
Change-Id: Ia3b1cc77bfbe6ee988c395fde06c0eb92940b784
1. The RD scores obtained during the tx size selection were stored in the
tx cache, and used to help make the tx decision for the following frames.
This wasn't used anymore in VP9 encoder. Recovered the related decision
making code from 1.5+ years ago, and borg tests didn't show any quality
gain. This patch removed it to lower the complexity.
2. An optimization was done after the above refactoring. If the tx_mode
is not TX_MODE_SELECT, we only need to test the chosen tx size instead
of all posible tx sizes. This gave a 1.5% average speed gain at speed 2,
and a 1% average speed gain at speed 3.
Change-Id: Id8cd650e066a8cef33829d8c15388a8138adc78c
Separate the hybrid transform case from 2D-DCT case. This will
allow us to clear up cross dependency between c and SIMD
implementations later.
Change-Id: Iaa499e8b096850a1c5a0c50a3b6e63e15d0184bf
This commit simplifies the intra block boundary condition logic.
It removes the block index from the argument set.
Change-Id: If00142512eb88992613d6609356dfd73ba390138
Changes to allow more use of rectangular partitions at
speeds 1 and 2 for content classed by the first pass as
animation and for blocks near the active image edge.
This has quite a big impact in quality for the animated
test sequence but also hurts encode speed for speed 2.
For other content types the impact on both speed and
quality is small.
Added some plumbing for detection of internal vertical
image edges.
Change-Id: I3fc48de2349f8cb87946caaf0b06dbb0ea261a9a
Change speed features / behavior for split mode when there
is an internal active edge (e.g. formatting bars).
Remove some threshold constraints in rd code near the active
edge of the image.
Add some plumbing for left and right active edge detection.
Patch set 5. Limit rd pass through for sub 8x8 to internal active edges.
This takes away any speed penalty for most clips but keeps the enhanced
edge coding for the more critical case of internal image edges
Change-Id: If644e4762874de4fe9cbb0a66211953fa74c13a5
to MB_MODE_INFO_EXT. This saves 36 bytes per 8x8 area for
both the decoder and encoder. (encoder has two MODE_INFO
buffers)
Change-Id: If006abb2224acaf326df3c2be09e77e967662107
Various header/test files had to be re-worked in order to
build "Remove cm parameter from vp9_decode_block_tokens()".
This patch reverts the "Remove cm" part and only contains
the re-worked header files.
Change-Id: I520958a88d1991fee988a3c784d0eac40e117a32
With the sad functions, and hopefully the variance functions soon,
moving to the vpx_dsp location, place the defines used in the
reference C code in a common location.
Change-Id: I4c8ce7778eb38a0a3ee674d2f1c488eda01cfeca
this macro was used inconsistently and only differs in behavior from
DECLARE_ALIGNED when an alignment attribute is unavailable. this macro
is used with calls to assembly, while generic c-code doesn't rely on it,
so in a c-only build without an alignment attribute the code will
function as expected.
Change-Id: Ie9d06d4028c0de17c63b3a27e6c1b0491cc4ea79
(see I3a05cf1610679fed26e0b2eadd315a9ae91afdd6)
For the test clip used, the decoder performance improved by ~2%.
This is also an intermediate step towards adding back the
mode_info streams.
Change-Id: Idddc4a3f46e4180fbebddc156c4bbf177d5c2e0d
This commit separates Hadamard transform/quantization operations
from rate and distortion computation in block_yrd. This allows one
to skip SATD computation when all transform blocks are quantized
to zero. It also uses a new block error function that skips
repeated computation of sum of squared residuals. It reduces the
CPU cycles spent on block error calculation in block_yrd by 40%.
Change-Id: I726acb2454b44af1c3bd95385abecac209959b10
To enable us to the scale-invariant motion estimation
code during mode selection, each of the reference
buffers is scaled to match the size of the frame
being encoded.
This fix ensures that a unit scaling factor is used in
this case rather than the one calculated assuming that
the reference frame is not scaled.
Change-Id: Id9a5c85dad402f3a7cc7ea9f30f204edad080ebf
Revised adjustment for rd based on source complexity.
Two cases:
1) Bias against low variance intra predictors
when the actual source variance is higher.
2) When the source variance is very low to give a slight
bias against predictors that might introduce false texture
or features.
The impact on metrics of this change across the test sets is
small and mixed.
derf -0.073%, -0.049%, -0.291%
std hd -0.093%, -0.1%, -0.557%
yt +0.186%, +0.04%, - 0.074%
ythd +0.625%, + 0.563%, +0.584%
Medium to strong psycho-visual improvements in some
problem clips.
This feature and intra weight on GF group length now
turned on by default.
Change-Id: Idefc8b633a7b7bc56c42dbe19f6b2f872d73851e
This experiment biases the rd decision based on the impact
a mode decision has on the relative spatial complexity of the
reconstruction vs the source.
The aim is to better retain a semblance of texture even if it
is slightly misaligned / wrong, rather than use a simple rd
measure that tends to favor use of a flat predictor if a perfect
match can't be found.
This improves the appearance of texture and visual quality
on specific test clips but is hidden under a flag and currently
off by default pending visual quality testing on a wider Yt set.
Change-Id: Idf6e754a8949bf39ed9d314c6f2daaa20c888aad
The joint_motion_search function alternates prediction
between two reference frames. In order to reuse existing
code, a pointer to the appropriate reference frame is
written into xd->plane[0].pre[0], that the motion
estimation code assumes points to the reference frame.
If this first reference frame was scaled then the
pointer was incorrectly being reset to point to the
unscaled reference frame rather than the scaled
version.
Change-Id: I76f73a8d8f4f15c1f3a5e7e08a35140cdb7886ab
It was tiny when it was orginally marked INLINE. Forcing this function
to be inlined prevents the compiler from inlining its much smaller
callers.
No measurable speed impact, 28320 byte smaller libvpx.a
Change-Id: I6bf4c917157d15cbadb3cd3e20a9e82d35dc7d6f
Frame buffers are now allocated dynamically on-demand.
Entries in the reference frame map, cm->ref_frame_map,
may now be set to -1 (INVALID_IDX) to indicate that
there is not a valid reference buffer in that "slot".
All slots in the reference frame map are now initialized
to the empty state (-1) and each buffer is initialized
to have a reference count of 0.
Change-Id: Id1afe98de98db4ae8b2dfefed7889c3b28c68582
Note: This feature is still in development.
Add an option for the encoder to decide the resolution
at which to encode each frame.
Each KF/GF/ARF goup is tested to see if it would be
better encoded at a lower resolution. At present, each
KF/GF/ARF is coded first at full-size and if the coded
size exceeds a threshold (twice target data rate) at
the maximum active Q then the entire group is encoded
at lower resolution.
This feature is enabled in vpxenc by setting:
--resize-allowed=1
In addition, if the vpxenc command line also specifies
valid frame dimensions using:
--resize-width=XXXX & --resize_height=YYYY
then *all* frames will be encoded at this resolution.
Change-Id: I13f341e0a82512f9e84e144e0f3b5aed8a65402b
Jingning Han
Alex Converse
Yunqing Wang
Yaowu Xu
paulwilkins
Johann
James Zern
Scott LaVarnway
Adrian Grange