Fixed an encoder crash. Set skip_txfm to 0 for cases that skip_txfm
isn't calculated. Put memcpy of skip_txfm at right place.
Change-Id: Ib3b6afc1b251a85b2a853c8138fb3393f48cfef6
Add comments on the use case of these definitions. Further reduce
the scope of header file in vp9_context_tree.h.
Change-Id: Ic4a7638e838d0ac441b64abfc56e57354c059d75
This commit fixes a buffer pointer mis-use in store_coding_context.
The compression performance for stdhd set of speed 3 is improved by
0.097%. It fixes issue 869.
Change-Id: Idc59e22035eaf39f7133ca04174894374d647ff7
This SSE2 is based on VP8 denoiser's SSE2 code. In VP8, there are
only 16x16 blocks in denoiser, while in VP9, there are 13 different
block sizes.
By adding this SSE2 code, the improvement of encoder speed is around
20%(using C code vs using SSE2 code), vary for different clips.
The unit test for VP9 denoiser is to confirm that the SSE2 code is
bit-exact with the C code. The unit test covers all block size.
Change-Id: Ic8d8ac26db4ea40a5f146b5678a065af07eaaa3d
It is possible that the GOLDEN reference frame is not avaiable, in
which setting the predicted mv will be associated with a residual
value of INT_MAX. This commit checks this condition before
left shift and comparison with that of ALTREF frame, to avoid
overflow issue.
Change-Id: Ib98c3149dbdd016f2fe5beaafb13f67d469dd07c
This commit adds proper initialization of segment id for variance AQ
mode in non-rd coding path. It fixes the enc/dec mismatch issue of
rt=7 with --aq-mode=1, as reported in issue #816
Change-Id: I02fa41b96345bf2e66077d5ea553f85ba800f7bb
This commit enables the encoder to skip split partition search if
the bigger block size has all non-zero quantized coefficients in low
frequency area and the total rate cost is below a certain threshold.
It logarithmatically scales the rate threshold according to the
current block size. For speed 3, the compression performance loss:
derf -0.093%
stdhd -0.066%
Local experiments show 4% - 20% encoding speed-up for speed 3.
blue_sky_1080p, 1500 kbps
51051 b/f, 35.891 dB, 67236 ms ->
50554 b/f, 35.857 dB, 59270 ms (12% speed-up)
old_town_cross_720p, 1500 kbps
14431 b/f, 36.249 dB, 57687 ms ->
14108 b/f, 36.172 dB, 46586 ms (19% speed-up)
pedestrian_area_1080p, 1500 kbps
50812 b/f, 40.124 dB, 100439 ms ->
50755 b/f, 40.118 dB, 96549 ms (4% speed-up)
mobile_calendar_720p, 1000 kbps
10352 b/f, 35.055 dB, 51837 ms ->
10172 b/f, 35.003 dB, 44076 ms (15% speed-up)
Change-Id: I412e34db49060775b3b89ba1738522317c3239c8
Incorporates the WRAPLOW macro into the non-highbitdepth transforms
to aid hardware verification between a software C model and an
intended hardware implementation though the use of the configure
options: --enable-experimental --enable-emulate-hardware.
Note that to avoid further discrepancies between the sse/sse2
implementations of the transforms and the C implementation, when the
emulate hardware option is invoked, we also disable sse/sse2/etc.
Also incudes some minor cleanups/renaming etc.
Change-Id: Ib864d8493313927d429cce402982f1c8e45b3287
Miscellaneous bug-fixes for high bitdepth functionality.
With this patch, high bit-depth profiles become mostly functional,
except for an intermittent assert failure issue that is being
tracked.
Change-Id: I6a7fcbdcf1e5b09842e88535f8442d2e1230748c
This commit removes unused header file vp9_onyxc_int.h and repeatedly
included file vpx_ports/mem.h from vp9_block.h
Change-Id: I400b210bd1da48f1880bd50a8f4a6e2c690e15a1
Block transform skipping was implemented based on DCT's energy
conservation property. Modified the thresholds using zero bin
parameters. AC and DC coefficients were checked separately to
allow better identifying of skippable blocks.
Borg test at speed 3 showed:
stdhd set: psnr gain: 0.153%, ssim gain: 0.051%;
derf set: psnr gain: 0.023%, ssim gain: 0.036%
For most test clips, the encoding speedup is 1% - 2%.
parkrun(720p): 7.5% speedup, park_joy(1080p): 3.5% speedup.
Change-Id: If28eb81113a077414f5ca7b021c14f9069b373bb
For regular inter frames, if the distance from GOLDEN_FRAME is larger
than 2 and if the predicted motion vector of LAST_FRAME gives lower
sse than that of GOLDEN_FRAME, skip the GOLDE_FRAME mode checking in
the rate-distortion optimization. It provides about 5% speed-up at
expense of -0.137% and -0.230% performance down for speed 3. Local
experiment results:
pedestrian 1080p 2000 kbps
66712 b/f, 40.908 dB, 113688 ms ->
66768 b/f, 40.911 dB, 108752 ms
blue_sky 1080p 2000 kbps
51054 b/f, 35.894 dB, 70406 ms ->
51051 b/f, 35.891 dB, 67236 ms
old_town_cross 720p 1500 kbps
14412 b/f, 36.252 dB, 60690 ms ->
14431 b/f, 36.249 dB, 57346 ms
Change-Id: Idfcafe7f63da7a4896602fc60bd7093f0f0d82ca
When calculating delta in VP8 denoiser, since the block size is fixed to 16x16,
the divisor is 256, which is the number of the pixel.
But in VP9, the block size varies, the divisor should correspond to the block
size.
Change-Id: Ibdc1e5d23ba8c788b0d0dc6d406bcdfc34c1b142
One is a more aggressive version of the pruned subpel tree
search where only a single halfpel candidate is searched.
The search candidate is based on a surface fit result.
The other is a method to obtain the subpel position at one
shot based on the same surface fit.
The methods have not been deployed in any speed setting yet.
Change-Id: I34fef3f2e34f11396c9d1ba97f4be8c4ffca62d3
This commit enables the encoder to skip checking ALTREF inter modes
in ARF coding, if the predicted motion vectors suggest that the
GOLDEN_FRAME provides higher prediction accuracy than ALTREF_FRAME.
It improves the speed 3 encoding speed by about 5%, at the expense
of compression performance loss -0.041% and -0.225% for derf and
stdhd, respectively.
pedestrian_area 1080p 2000 kbps
66705 b/f, 40.909 dB, 118738 ms ->
66732 b/f, 40.908 dB, 113688 ms
old_town_cross 720p 1500 kbps
14427 b/f, 36.256 dB, 62746 ms ->
14412 b/f, 36.252 dB, 60690 ms
blue_sky 1080p 1500 kbps
51026 b/f, 35.897 dB, 73310 ms ->
50921 b/f, 35.893 dB, 70406 ms
bus CIF 1000 kbps
21301 b/f, 34.841 dB, 7326 ms ->
21248 b/f, 34.837 dB, 7196 ms
Change-Id: I76cf88b4d655e1ee3c0cb03c8a5745493040e8d2
This patch re-enabled the feature in Pengchong's patch
(commit 1286126073). Originally, it
was turned on while use_lastframe_partitioning > 0(not used anymore).
Now it was added as a feature, and turned on while speed >= 2.
As described in the original patch, this feature helps speed up the
slideshows in YouTube.
Change-Id: I1b0f18d65da1ee1c8d1e117dabba910c5207c471
Jim Bankoski
Yunqing Wang
Jingning Han
Deb Mukherjee
JackyChen
Yaowu Xu
Alex Converse