Eideticker

Eideticker is an automated test harness for web browsers that captures and analyzes browser output via HDMI or an external camera.

Requirements

• Ubuntu Linux system with python and various other third-party dependencies installed. You can make sure that you have everything installed by running install-ubuntu-deps.sh from the root directory of your eideticker checkout (root is required).

  The recommended Linux distribution to use is Ubuntu 14.04 64-bit (32-bit is known not to work with the PointGrey cameras). Later versions of Ubuntu are probably also fine.

• A supported mobile phone running Firefox OS or Android. Your phone must be connected to the same network as the machine running the tests. In the case of Android, it is currently required that your device be rooted and must be configured to communicate with the host using either the Android Debug Bridge (adb) or SUTAgent. If the latter on Android, you must configure the su binary to automatically allow SUTAgent to run commands as root in silent mode (so that notifications don't pop up while running tests.

The remaining requirements depend on whether you are capturing with the phone's HDMI out or with a PointGrey camera. It is also possible to use the Eideticker harness without video capture, which can be useful for certain cases: see below.

HDMI

For HDMI capture, the Linux system you are using must be a desktop class machine with a spare PCI express slot (we used the Dell Precision T1600 workstation, but that seems to be no longer sold) with a Blackmagic Design DeckLink HD Extreme 3D card installed. The mobile phone you are using must also support HDMI out with a clean 720p or 1080p signal: the Samsung Galaxy Nexus (with an MHL adaptor) and the LG G2X are known to work. Note that the Samsung Nexus 4 is known NOT to work, even with a MHL HDMI adapter as it does not output an exact 720p signal (and thus the Decklink card can not understand what it is outputting).

For more information on the Decklink cards, see the Decklink Primer

Camera

• The Linux system you are using must have USB3 ports (USB3 ports are usually blue). If you have a desktop machine without a USB3 port, there are PCI cards to add this capability.

• USB3 micro-b cable (possibly add a hub depending on machine)

• PointGrey Flea3 FL3-U3-13E4C-C camera. Note that the iris on the camera should be fully open for the distributed settings file to be most effective.

• Fujinon HF12.5HA-1B camera lens.

• Joby GorillaPod flexible tripod for the camera.

• FlyCapture camera software available from PointGrey (you will need to register an account to access the downloads). Note that you may also need to run this using sudo in order to get it to detect the camera.

Installation

Host Machine

Run bootstrap.sh in the root directory to set everything up.

There are two additional steps required if you wish to capture video with HDMI or the PointGrey Camera

HDMI

From the root directory, type:

cd src/videocapture/videocapture/decklink && make

Camera

cd src/videocapture/videocapture/pointgrey && make

Phones

You will need to install copies of Orangutan and ntpdate-android on each of the phones in either /data/local or /data/local/tmp.

Usage

Eideticker is meant to be run in a virtualenv, so the first step is to set that up in your shell by running this command within the root directory:

source ./bin/activate

The next step depends on whether you're using adb or SUTAgent to interface with the device (on Firefox OS, we assume adb). If the former, just connect your device to your computer's USB port. That's it, you should now be set to run tests!

If you're using SUTAgent, you'll want to start the SUTAgent app, note the ip address of your phone, then set the following environment variables:

export DM_TRANS=sut
export TEST_DEVICE=<device ip of phone>

If you are using a FirefoxOS device with adb, then you might need sudo privileges for adb if you haven't set up udev rules that allow a normal user to access the device:

adb kill-server
sudo adb start-server

If you are using a FirefoxOS device, then you also might need to set the property of the following environment variable as it presently is set to default to 'android'

export DEVICE_TYPE=b2g

On FirefoxOS, you will also need to set up a WIFI settings file for the device, so it knows which network to connect to when running tests (this should be the same one that the host computer is connected to). You can generate one by running the create-wifi-settings.py script with the appropriate arguments. For example, to create WIFI settings for a network called "Mozilla" with WPA-PSK key management and the password "letmein", run:

create-wifi-settings.py Mozilla WPA-PSK letmein > wifi-settings-mozilla

If you are using a PointGrey camera to capture footage of the device, you will need to first calibrate the camera and determine the area to capture.

First, set the following environment variables:

export CAPTURE_DEVICE=pointgrey

Next, change to the /src/videocapture/videocapture/pointgrey directory and run make to build the capture tool for the PointGrey hardware.

Make sure that you have the appropriate udev rules in place. These are set in /etc/udev/rules.d/40-pgr.rules. You can find your exact vendor and product details by running lsusb with the camera attached. For example if you see something like:

Bus 004 Device 003: ID 1e10:300a Point Grey Research, Inc.

You will need the following like in your rules file:

ATTRS{idVendor}=="1e10", ATTRS{idProduct}=="300a", MODE="0664", GROUP="pgrimaging"

This should be done for you during the installation of the FlyCap software, however it's best to double check as the values are case sensitive. If the camera cannot be detected it's a good chance this is wrong. You should restart the udev service after updating this file, and may been to disconnect and reconnect the camera:

sudo service udev restart

Now position the camera setup and mounted device so that the device appears to be in the visual field. Next, run the flycap utility on the command line. Select camera. Select "Configure Selected". In new dialog, select "Standard Video Modes". Select Y8. Now, go back to main dialog and select "OK". You should see a camera preview. Adjust the camera/device as needed until there is a very clear and sharp picture of the device in view. Once this is done, you will need to run the getdimensions.py to get the dimensions to capture:

./bin/getdimensions.py -w <wifi settings file>

Set the CAPTURE_AREA environment variable to the output of that utility, for example:

export CAPTURE_AREA="[355, 83, 1043, 933]"

Running a simple test

To get a list of tests to run, use the list tests script:

./bin/list-tests.py

Once you've selected a test to run, you can launch it with the following command line:

./bin/runtest.py [options] <test>

On Android, you need to specify the name of the application you want to run the test. For fennec nightly, you'd use:

./bin/runtest.py --app-name org.mozilla.fennec <test>

On Firefox OS, you can just specify the test and a wifi settings file, like this:

./bin/runtest.py -w <wifi settings file> <test>

If you have a proper camera set up, you should get a recorded capture in the captures/ subdirectory. You can view some details of this capture with the Eideticker web application. Load it by running ./bin/webapp.sh and then navigating to http://localhost:8080 with your browser.

If you just want to run through a test without capturing any output (e.g. if you are just working on a test and/or don't have a capture rig), pass the --no-capture option. For example on Android:

./bin/runtest.py --app-name org.mozilla.fennec --no-capture taskjs

Tests that need Marionette

If you need to run a test that needs Marionette you will need to forward port 2828 adb forward tcp:2828 tcp:2828

Console profiling

Console mode allows you to get one-off results of running Eideticker for a single test. You run a program called get-metric-for-build.py and it will print some numbers to standard output (or optionally output a web visualization of the results: see below).

get-metric-for-build on Android

To run get-metric-for-build against an already-installed version of Fennec, specify the name of the test followed by the names of the applications you want to test:

./bin/get-metric-for-build.py <test> [app name 1] [app name 2] ...

If you want to test a set of apks, use the --use-apks option and specify the set of apks you want to test after the test name.

./bin/get-metric-for-build.py --use-apks <test> <apk of build 1> [apk of build 2] ...

For example, to run the canvas clock test against the copy of Fennec nightly currently installed on the device, do:

./bin/get-metric-for-build.py --use-apks clock org.mozilla.fennec

To run the same test against an uninstalled copy of Fennec nightly, try:

./bin/get-metric-for-build.py --use-apks clock nightly.apk

Occasionally you may want to run Fennec with a custom preference or two set, you can do this with the "extra prefs" option. Just pass a json dictionary of preferences, and they will be merged into the profile used by fennec:

./bin/get-metric-for-build.py --use-apks \
    --extra-prefs "{gfx.color_management.enablev4: true}" clock \
    nightly.apk

In addition to supporting HDMI capture and analysis on Fennec, it is also possible to run the Eideticker harness in a mode that simply "captures" a performance log of the amnount of checkerboarding in Fennec and outputs results. This has two advantages: first, you don't need any kind of specialized hardware. Second, it's much faster (since there's no video encoding/decoding/analysis step). For this you want to pass in "--no-capture" and "--get-internal-checkerboard-stats", like so:

./bin/get-metric-for-build.py --use-apks --no-capture --get-internal-checkerboard-stats src/tests/ep1/taskjs.org/index.html nightly.apk

get-metric-for-build on FirefoxOS

Running get-metric-for-build on FirefoxOS is almost exactly the same, except you do not have to specify apk or application information. Just specify the name of the test you'd like to run. For example:

./bin/get-metric-for-build.py -w <wifi settings file> b2g-contacts-scrolling

A WIFI settings file is required on FirefoxOS because we automatically wipe the saved settings before every test and we always need a network connection in order to synchronize the time between the device and the host machine running it, even if there is no other network activity involved in the test.

Getting more results

Typically, you want to run Eideticker more than once on a particular test to get a range of results as tests are not 100% deterministic (both due to the nature of the tests and the device we are running the test on). You can do this with the --num-runs option. For example on Android:

./bin/get-metric-for-build.py --use-apks --num-runs 5 clock nightly.apk

Or on FirefoxOS:

./bin/get-metric-for-build.py -w <wifi settings file> --num-runs 5 clock

Visualizing results

You can optionally output the results of get-metric-for-build to a web site through the --output-dir option. For example:

./bin/get-metric-for-build.py -w <wifi settings file> --num-runs 5 \
    --output-dir $HOME/contacts-test b2g-contacts-scrolling

You can then open up the resulting directory in a web browser and view the results. Or upload them to a static web server and share them with others!

Interpreting results

If you want to know more about the results (where the numbers are coming from) you can open them up inside the Eideticker web interface. To open it, execute:

./bin/webapp.sh

Then connect to http://localhost:8080. You should see a list of captures, select the one you're interested in to dive into fine grained detail.

Eideticker "dashboard"

Dashboard mode is used to generate a dashboard of Eideticker results, like what you see at http://eideticker.mozilla.org. From a toplevel, it is run from a script called bin/run-update-dashboard.sh, which can be called standalone. This script then in turn calls another script called bin/update-dashboard.py with various arguments corresponding to Firefox version, test to run, etc. This is not yet supported for FirefoxOS.

Setting up a new instance of the dashboard has two components: setting up one or more "clients" (machines that run the tests) and setting up the server (machines that will serve up the results).

Dashboard Server Setup

• Install nginx, ssh, and rsync if not installed already.
• Create an "eideticker" user on the machine (with home directory).
• As the newly-created user, create a "www" subdirectory.
• Create an nginx configuration (on Redhat-based systems, /etc/nginx/conf.d).
• Restart nginx. You will need to configure the clients before you will see anything on the dashboard.

Here's the nginx configuration we currently use in production:

server {
        listen 80; #or change this to your public IP address eg 1.1.1.1:80
        server_name eideticker;
        server_name eideticker.wrla.ch;
        access_log /var/log/nginx/eideticker.access_log;
        error_log /var/log/nginx/eideticker.error_log;

        location / {
                root   /home/eideticker/www;
                index  index.html index.htm;
                add_header 'Access-Control-Allow-Origin' '*';
        }
}

Note the Access-Control-Origin header, which allows us to integrate the SPS profiler to request Eideticker resources directly (useful for direct linking to capture analysis).

Dashboard Client Setup

Each Eideticker client works by creating its own static copy of the dashboard, then copying the relevant files to the server setup above.

To setup to capture and store results

FIXME: TODO

To setup to synchronize to the Eideticker server:

• Generate an ssh key for the client machine, if it doesn't have one already.

• On the server, copy/paste the generated public key into /home/eideticker/.ssh/authorized_keys (if you're creating this file / directory for the first time, be sure that the directory has 700 (rwx only for its owner) permissions and the file has 600 (rw only for its owner) permissions.

• Set up the sync-dashboard script to synchronize the dashboard data to the server on a fixed schedule using cron. Use crontab -e to add an entry like this:

  0 0 * * * /home/mozauto/src/eideticker/bin/sync-dashboard.sh eideticker.wrla.ch

Creating New Eideticker Tests

There are several types of Eideticker tests: startup tests, web tests, and b2g (FirefoxOS) tests. Startup tests measure the amount of time it takes to load a particular web site. Web tests load a website and then perform a set of actions on them (e.g. panning). B2G tests record the performance of some set of actions inside a FirefoxOS application (e.g. scrolling through a list of contacts).

The first step in adding a new test is to create a subdirectory in src/tests to store the test, then add an ini file with the test manifest. A manifest allows the command line tools to get the testname and we provides the necessary metadata (test descriptions, etc.) for the dashboard and other reporting tools. It is just a simple ini file like this:

[index.html]
key = clock
shortDesc = Canvas Clock Test
defaultMeasure = fps

The filename in square brackets is the test file name (usually an html file in the case of a web test, probably a python file in the case of a b2g test). The "key" is a short alphanumeric key used to identify the test. The shortDesc and defaultMeasure are for the dashboard: the description is the graph title, the defaultMeasure indicates what metric we should display by default when the user clicks on the entry in the dashboard web UI.

After creating the ini file, you'll want to link to it from the parent directory so it gets picked up by the harness. See "manifest.ini" in the ep1 testset for an example.

B2G Tests

A B2G test is generally a mix of calls to Marionette (to launch an application and set it into an initial state) followed by another set of calls to Marionette and/or a set of direct input actions which are recorded.

Perhaps the best way to illustrate what you need in such a test is to take an example. Let's take a look at the current b2g startup test:

from eideticker.test import B2GTest
import time
from gaiatest.gaia_test import GaiaApps

class Test(B2GTest):
    def __init__(self, testinfo, **kwargs):
        super(Test, self).__init__(testinfo, **kwargs)

        self.appname = testinfo['appname']

    def run(self):
        apps = GaiaApps(self.device.marionette)

        # theoretically it would be cleaner to set this specifically for the
        # camera test, but that seemed additional complication for no real
        # gain
        apps.set_permission('Camera', 'geolocation', 'deny')

        self.start_capture()
        self.test_started()
        app = apps.launch(self.appname)
        assert app.frame_id is not None
        self.log("Waiting %s seconds for app to finish starting" %
                 self.capture_timeout)
        time.sleep(self.capture_timeout)
        self.test_finished()
        self.end_capture()

        # cleanup: switch back to main frame
        self.device.marionette.switch_to_frame()

The init method contains a constructor which grabs a bit of metadata from the testinfo dictionary (passed in from the manifest) to determine which application to launch.

The run method is where we actually interact with the harness. The key points of interaction with the Eideticker harness are start_capture, test_started, test_finished, and end_capture methods. start_capture and end_capture correspond to starting and shutting down the video capture. test_started and test_finished correspond to the test starting and ending. Generally you would pair each start and end pair together unless you were doing something exotic. It is between the test_started and test_finished callbacks that you would perform whatever action you wanted to perform.

Web Tests

Web tests are just static HTML with a bit of JavaScript glue to interface with the harness and some JSON metadata to describe actions that Eideticker should perform while a capture is ongoing. The simplest example of a test would probably be the clock demo, which you can find in src/tests/ep1/clock/index.html (you have to run `./bootstrap.sh first to checkout the ep1 submodule before you can find this file).

Writing your own tests is a matter of adding a subdirectory to Eideticker as per the generic instructions, then creating/copying an HTML page of your choice, adding the relevant JavaScript code to start/stop the test as appropriate, and then making an actions.json file with whatever actions you want to simulate during the test.

The JavaScript code is encapsulated in the file: src/tests/js/eideticker.js. Much of the code in there is just used by the harness. From the point of view of an Eideticker test, you really just need to call the "finish" method, which we use to trigger the end of a capture.

Creating actions for use during a test (and making sure they get called) is somewhat more involved, but not much. Alongside the various HTML/JS/Image files that correspond to your page, you also want to create an actions.json file that indicates what you want to happen during the test. Here's an example:

{
  "default": {
    "LG-P999": [
      ["scroll_down", 4],
      ["sleep", 5]
    ],
    "Galaxy Nexus": [
      ["scroll_down", 7, 3],
      ["sleep", "4"]
    ]
  }
}

As you can see, this is basically a dictionary of dictionaries. The top-level is a dictionary of action sets. Normally you just have one, default, but you can add more in case you want to have multiple tests with different types of actions (the New York Times test, in src/tests/ep1/nytimes would be an exmaple of this).

The next level down is a dictionary of actions corresponding to different models of phone (as determined by the ro.product.model property of Android). This is because different types of phones have different input properties (screen sizes, operating system versions, etc.). The set of actions is an array of arrays. Each action array corresponds to a single action performed during a test. As of this writing, there are four possible actions:

sleep [secs]

This action simply sleeps for the corresponding number of seconds (typically used to allow something to complete in the capture before possibly performing other actions)

scroll_down [number of times] [number of steps]

Triggers a scroll down the specified number of times. Optionally pass the number of steps parameter to make the action go slower is faster (lower=faster, default is 10).

scroll_up [number of times] [number of steps]

Triggers a scroll up the specified number of times. Optionally pass the number of steps parameter to make the action go slower is faster (lower=faster, default is 10).

double_tap [x coordinate] [y coordinate]

Triggers two tap events in succession, at the specified x and y coordinates (this is designed to allow zooming into a web page).

Triggering these actions requires posting to the JSON API endpoint on the Eideticker desktop machine running the test. This is typically done as follows (using jQuery):

$.post('/api/captures/input', { 'commands': 'default' },
       function() {
           Eideticker.finish();
       });

Obviously you should replace "default" in the above example with the set of commands that you actually want to run.