gecko-dev/netwerk/base/nsIPermissionManager.idl

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/. */

/**
 * This file contains an interface to the Permission Manager,
 * used to persistenly store permissions for different object types (cookies, 
 * images etc) on a site-by-site basis.
 *
 * This service broadcasts the following notification when the permission list
 * is changed:
 *
 * topic  : "perm-changed" (PERM_CHANGE_NOTIFICATION)
 *          broadcast whenever the permission list changes in some way. there
 *          are four possible data strings for this notification; one
 *          notification will be broadcast for each change, and will involve
 *          a single permission.
 * subject: an nsIPermission interface pointer representing the permission object
 *          that changed.
 * data   : "deleted"
 *          a permission was deleted. the subject is the deleted permission.
 *          "added"
 *          a permission was added. the subject is the added permission.
 *          "changed"
 *          a permission was changed. the subject is the new permission.
 *          "cleared"
 *          the entire permission list was cleared. the subject is null.
 */

#include "nsISupports.idl"

interface nsIURI;
interface nsIObserver;
interface nsIPrincipal;
interface nsIDOMWindow;
interface nsIPermission;
interface nsISimpleEnumerator;

[scriptable, uuid(0d1b8c65-0359-4a8c-b94d-4d3643b23e61)]
interface nsIPermissionManager : nsISupports
{
  /**
   * Predefined return values for the testPermission method and for
   * the permission param of the add method
   * NOTE: UNKNOWN_ACTION (0) is reserved to represent the
   * default permission when no entry is found for a host, and
   * should not be used by consumers to indicate otherwise.
   */
  const uint32_t UNKNOWN_ACTION = 0;
  const uint32_t ALLOW_ACTION = 1;
  const uint32_t DENY_ACTION = 2;
  const uint32_t PROMPT_ACTION = 3;

  /**
   * Predefined expiration types for permissions.  Permissions can be permanent
   * (never expire), expire at the end of the session, or expire at a specified
   * time. Permissions that expire at the end of a session may also have a
   * specified expiration time.
   */
  const uint32_t EXPIRE_NEVER = 0;
  const uint32_t EXPIRE_SESSION = 1;
  const uint32_t EXPIRE_TIME = 2;

  /**
   * Add permission information for a given URI and permission type. This
   * operation will cause the type string to be registered if it does not
   * currently exist. If a permission already exists for a given type, it
   * will be modified.
   *
   * @param uri         the uri to add the permission for
   * @param type        a case-sensitive ASCII string, identifying the consumer.
   *                    Consumers should choose this string to be unique, with
   *                    respect to other consumers.
   * @param permission  an integer representing the desired action (e.g. allow
   *                    or deny). The interpretation of this number is up to the
   *                    consumer, and may represent different actions for different
   *                    types. Consumers may use one of the enumerated permission
   *                    actions defined above, for convenience.
   *                    NOTE: UNKNOWN_ACTION (0) is reserved to represent the
   *                    default permission when no entry is found for a host, and
   *                    should not be used by consumers to indicate otherwise.
   * @param expiretype  a constant defining whether this permission should
   *                    never expire (EXPIRE_NEVER), expire at the end of the
   *                    session (EXPIRE_SESSION), or expire at a specified time
   *                    (EXPIRE_TIME).
   * @param expiretime  an integer representation of when this permission
   *                    should be forgotten (milliseconds since Jan 1 1970 0:00:00). 
   */
  void add(in nsIURI uri,
           in string type,
           in uint32_t permission,
           [optional] in uint32_t expireType,
           [optional] in int64_t expireTime);

  /**
   * Add permission information for a given principal.
   * It is internally calling the other add() method using the nsIURI from the
   * principal.
   * Passing a system principal will be a no-op because they will always be
   * granted permissions.
   */
  void addFromPrincipal(in nsIPrincipal principal, in string typed,
                        in uint32_t permission,
                        [optional] in uint32_t expireType,
                        [optional] in int64_t expireTime);

  /**
   * Remove permission information for a given URI and permission type. This will
   * remove the permission for the entire host described by the uri, acting as the
   * opposite operation to the add() method.
   *
   * @param uri    the uri to remove the permission for
   * @param type   a case-sensitive ASCII string, identifying the consumer. 
   *               The type must have been previously registered using the
   *               add() method.
   */
  void remove(in nsIURI uri,
              in string type);

  /**
   * Remove permission information for a given principal.
   * This is internally calling remove() with the host from the principal's URI.
   * Passing system principal will be a no-op because we never add them to the
   * database.
   */
  void removeFromPrincipal(in nsIPrincipal principal, in string type);

  /**
   * Remove the given permission from the permission manager.
   *
   * @param perm   a permission obtained from the permission manager.
   */
  void removePermission(in nsIPermission perm);

  /**
   * Clear permission information for all websites.
   */
  void removeAll();

  /**
   * Clear all permission information added since the specified time.
   */
  void removeAllSince(in int64_t since);

  /**
   * Test whether a website has permission to perform the given action.
   * @param uri     the uri to be tested
   * @param type    a case-sensitive ASCII string, identifying the consumer
   * @param return  see add(), param permission. returns UNKNOWN_ACTION when
   *                there is no stored permission for this uri and / or type.
   */
  uint32_t testPermission(in nsIURI uri,
                          in string type);

  /**
   * Test whether the principal has the permission to perform a given action.
   * System principals will always have permissions granted.
   */
  uint32_t testPermissionFromPrincipal(in nsIPrincipal principal,
                                       in string type);

  /**
   * Test whether the principal associated with the window's document has the
   * permission to perform a given action.  System principals will always
   * have permissions granted.
   */
  uint32_t testPermissionFromWindow(in nsIDOMWindow window,
                                    in string type);

  /**
   * Test whether a website has permission to perform the given action.
   * This requires an exact hostname match, subdomains are not a match.
   * @param uri     the uri to be tested
   * @param type    a case-sensitive ASCII string, identifying the consumer
   * @param return  see add(), param permission. returns UNKNOWN_ACTION when
   *                there is no stored permission for this uri and / or type.
   */
  uint32_t testExactPermission(in nsIURI uri,
                               in string type);

  /**
   * See testExactPermission() above.
   * System principals will always have permissions granted.
   */
  uint32_t testExactPermissionFromPrincipal(in nsIPrincipal principal,
                                            in string type);

  /**
   * Test whether a website has permission to perform the given action
   * ignoring active sessions.
   * System principals will always have permissions granted.
   *
   * @param principal the principal
   * @param type      a case-sensitive ASCII string, identifying the consumer
   * @param return    see add(), param permission. returns UNKNOWN_ACTION when
   *                  there is no stored permission for this uri and / or type.
   */
  uint32_t testExactPermanentPermission(in nsIPrincipal principal,
                                        in string type);

  /**
   * Get the permission object associated with the given principal and action.
   * @param principal The principal
   * @param type      A case-sensitive ASCII string identifying the consumer
   * @param exactHost If true, only the specific host will be matched,
   *                  @see testExactPermission. If false, subdomains will
   *                  also be searched, @see testPermission.
   * @returns The matching permission object, or null if no matching object
   *          was found. No matching object is equivalent to UNKNOWN_ACTION.
   * @note Clients in general should prefer the test* methods unless they
   *       need to know the specific stored details.
   * @note This method will always return null for the system principal.
   */
  nsIPermission getPermissionObject(in nsIPrincipal principal,
                                    in string type,
                                    in boolean exactHost);

   /**
    * Increment or decrement our "refcount" of an app id.
    *
    * We use this refcount to determine an app's lifetime.  When an app's
    * refcount goes to 0, we clear the permissions given to the app which are
    * set to expire at the end of its session.
    */
   void addrefAppId(in unsigned long appId);
   void releaseAppId(in unsigned long appId);

  /**
   * Allows enumeration of all stored permissions
   * @return an nsISimpleEnumerator interface that allows access to
   *         nsIPermission objects
   */
  readonly attribute nsISimpleEnumerator enumerator;

  /**
   * Remove all permissions associated with a given app id.
   * @param aAppId       The appId of the app
   * @param aBrowserOnly Whether we should remove permissions associated with
   *                     a browser element (true) or all permissions (false).
   */
  void removePermissionsForApp(in unsigned long appId,
                               in boolean browserOnly);

  /**
   * If the current permission is set to expire, reset the expiration time. If
   * there is no permission or the current permission does not expire, this
   * method will silently return.
   *
   * @param sessionExpiretime  an integer representation of when this permission
   *                           should be forgotten (milliseconds since
   *                           Jan 1 1970 0:00:00), if it is currently
   *                           EXPIRE_SESSION.
   * @param sessionExpiretime  an integer representation of when this permission
   *                           should be forgotten (milliseconds since
   *                           Jan 1 1970 0:00:00), if it is currently
   *                           EXPIRE_TIME.
   */
  void updateExpireTime(in nsIPrincipal principal,
                        in string type,
                        in boolean exactHost,
                        in uint64_t sessionExpireTime,
                        in uint64_t persistentExpireTime);

  /**
   * Remove all current permission settings and get permission settings from
   * chrome process.
   */
  void refreshPermission();
};

%{ C++
#define NS_PERMISSIONMANAGER_CONTRACTID "@mozilla.org/permissionmanager;1"

#define PERM_CHANGE_NOTIFICATION "perm-changed"
%}