gecko-dev/editor/base/nsTextEditor.cpp

2374 строки
86 KiB
C++
Исходник Обычный вид История

/* -*- Mode: C++ tab-width: 2 indent-tabs-mode: nil c-basic-offset: 2 -*-
*
* The contents of this file are subject to the Netscape Public License
* Version 1.0 (the "NPL") you may not use this file except in
* compliance with the NPL. You may obtain a copy of the NPL at
* http://www.mozilla.org/NPL/
*
* Software distributed under the NPL is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
* for the specific language governing rights and limitations under the
* NPL.
*
* The Initial Developer of this code under the NPL is Netscape
* Communications Corporation. Portions created by Netscape are
* Copyright (C) 1998 Netscape Communications Corporation. All Rights
* Reserved.
*/
#include "nsTextEditor.h"
#include "nsIEditorSupport.h"
#include "nsEditorEventListeners.h"
#include "nsIEditProperty.h"
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
#include "nsEditProperty.h" // temporary, to get html atoms
#include "nsIStreamListener.h"
#include "nsIParser.h"
#include "nsParserCIID.h"
#include "nsIDocument.h"
#include "nsIHTMLContentSink.h"
#include "nsHTMLContentSinkStream.h"
#include "nsHTMLToTXTSinkStream.h"
#include "nsXIFDTD.h"
#include "nsIDOMDocument.h"
#include "nsIDOMEventReceiver.h"
#include "nsIDOMKeyListener.h"
#include "nsIDOMMouseListener.h"
#include "nsIDOMDragListener.h"
#include "nsIDOMSelection.h"
#include "nsIDOMRange.h"
#include "nsIDOMNodeList.h"
#include "nsIDOMCharacterData.h"
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
#include "nsIDOMElement.h"
#include "nsIDOMTextListener.h"
#include "nsEditorCID.h"
#include "nsISupportsArray.h"
#include "nsIEnumerator.h"
#include "nsIContentIterator.h"
#include "nsIContent.h"
#include "nsLayoutCID.h"
#include "nsIPresShell.h"
#include "nsIStyleContext.h"
#include "nsVoidArray.h"
// transactions the text editor knows how to build itself
#include "TransactionFactory.h"
#include "PlaceholderTxn.h"
#include "InsertTextTxn.h"
#include "nsIFileStream.h"
#include "nsIStringStream.h"
class nsIFrame;
#include "nsIComponentManager.h"
#include "nsIServiceManager.h"
#include "nsTextEditRules.h"
static NS_DEFINE_IID(kIDOMEventReceiverIID, NS_IDOMEVENTRECEIVER_IID);
static NS_DEFINE_IID(kIDOMMouseListenerIID, NS_IDOMMOUSELISTENER_IID);
static NS_DEFINE_IID(kIDOMKeyListenerIID, NS_IDOMKEYLISTENER_IID);
static NS_DEFINE_IID(kIDOMTextListenerIID, NS_IDOMTEXTLISTENER_IID);
static NS_DEFINE_IID(kIDOMDragListenerIID, NS_IDOMDRAGLISTENER_IID);
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
static NS_DEFINE_IID(kIDOMSelectionListenerIID, NS_IDOMSELECTIONLISTENER_IID);
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
static NS_DEFINE_IID(kIEditPropertyIID, NS_IEDITPROPERTY_IID);
static NS_DEFINE_CID(kEditorCID, NS_EDITOR_CID);
static NS_DEFINE_IID(kIEditorIID, NS_IEDITOR_IID);
static NS_DEFINE_IID(kISupportsIID, NS_ISUPPORTS_IID);
static NS_DEFINE_IID(kITextEditorIID, NS_ITEXTEDITOR_IID);
static NS_DEFINE_CID(kTextEditorCID, NS_TEXTEDITOR_CID);
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
static NS_DEFINE_IID(kIContentIteratorIID, NS_ICONTENTITERTOR_IID);
static NS_DEFINE_CID(kCContentIteratorCID, NS_CONTENTITERATOR_CID);
static NS_DEFINE_IID(kIDOMRangeIID, NS_IDOMRANGE_IID);
static NS_DEFINE_CID(kCRangeCID, NS_RANGE_CID);
static NS_DEFINE_IID(kIInputStreamIID, NS_IINPUTSTREAM_IID);
static NS_DEFINE_IID(kIOutputStreamIID, NS_IOUTPUTSTREAM_IID);
#ifdef NS_DEBUG
static PRBool gNoisy = PR_FALSE;
#else
static const PRBool gNoisy = PR_FALSE;
#endif
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
/* ---------- TypeInState implementation ---------- */
// most methods are defined inline in TypeInState.h
NS_IMPL_ADDREF(TypeInState)
NS_IMPL_RELEASE(TypeInState)
NS_IMETHODIMP
TypeInState::QueryInterface(REFNSIID aIID, void** aInstancePtr)
{
if (nsnull == aInstancePtr) {
return NS_ERROR_NULL_POINTER;
}
if (aIID.Equals(kISupportsIID)) {
*aInstancePtr = (void*)(nsISupports*)this;
NS_ADDREF_THIS();
return NS_OK;
}
if (aIID.Equals(kIDOMSelectionListenerIID)) {
*aInstancePtr = (void*)(nsIDOMSelectionListener*)this;
NS_ADDREF_THIS();
return NS_OK;
}
return NS_NOINTERFACE;
}
TypeInState::~TypeInState()
{
};
NS_IMETHODIMP TypeInState::NotifySelectionChanged()
{
Reset();
return NS_OK;
};
/* ---------- nsTextEditor implementation ---------- */
nsTextEditor::nsTextEditor()
{
// Done in nsEditor
// NS_INIT_REFCNT();
mRules = nsnull;
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
nsEditProperty::InstanceInit();
}
nsTextEditor::~nsTextEditor()
{
//the autopointers will clear themselves up.
//but we need to also remove the listeners or we have a leak
nsCOMPtr<nsIDOMDocument> doc;
nsEditor::GetDocument(getter_AddRefs(doc));
if (doc)
{
nsCOMPtr<nsIDOMEventReceiver> erP;
nsresult result = doc->QueryInterface(kIDOMEventReceiverIID, getter_AddRefs(erP));
if (NS_SUCCEEDED(result) && erP)
{
if (mKeyListenerP) {
erP->RemoveEventListenerByIID(mKeyListenerP, kIDOMKeyListenerIID);
}
if (mMouseListenerP) {
erP->RemoveEventListenerByIID(mMouseListenerP, kIDOMMouseListenerIID);
}
if (mTextListenerP) {
erP->RemoveEventListenerByIID(mTextListenerP, kIDOMTextListenerIID);
}
if (mDragListenerP) {
erP->RemoveEventListenerByIID(mDragListenerP, kIDOMDragListenerIID);
}
}
else
NS_NOTREACHED("~nsTextEditor");
}
if (mRules) {
delete mRules;
}
NS_IF_RELEASE(mTypeInState);
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
nsEditProperty::InstanceShutdown();
}
// Adds appropriate AddRef, Release, and QueryInterface methods for derived class
//NS_IMPL_ISUPPORTS_INHERITED(nsTextEditor, nsEditor, nsITextEditor)
//NS_IMPL_ADDREF_INHERITED(Class, Super)
NS_IMETHODIMP_(nsrefcnt) nsTextEditor::AddRef(void)
{
return nsEditor::AddRef();
}
//NS_IMPL_RELEASE_INHERITED(Class, Super)
NS_IMETHODIMP_(nsrefcnt) nsTextEditor::Release(void)
{
return nsEditor::Release();
}
//NS_IMPL_QUERY_INTERFACE_INHERITED(Class, Super, AdditionalInterface)
NS_IMETHODIMP nsTextEditor::QueryInterface(REFNSIID aIID, void** aInstancePtr)
{
if (!aInstancePtr) return NS_ERROR_NULL_POINTER;
if (aIID.Equals(nsITextEditor::GetIID())) {
*aInstancePtr = NS_STATIC_CAST(nsITextEditor*, this);
NS_ADDREF_THIS();
return NS_OK;
}
return nsEditor::QueryInterface(aIID, aInstancePtr);
}
NS_IMETHODIMP nsTextEditor::Init(nsIDOMDocument *aDoc, nsIPresShell *aPresShell)
{
NS_PRECONDITION(nsnull!=aDoc && nsnull!=aPresShell, "bad arg");
nsresult result=NS_ERROR_NULL_POINTER;
if ((nsnull!=aDoc) && (nsnull!=aPresShell))
{
// Init the base editor
result = nsEditor::Init(aDoc, aPresShell);
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
if (NS_OK != result) { return result; }
// init the type-in state
mTypeInState = new TypeInState();
if (!mTypeInState) {return NS_ERROR_NULL_POINTER;}
NS_ADDREF(mTypeInState);
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
nsCOMPtr<nsIDOMSelection>selection;
result = nsEditor::GetSelection(getter_AddRefs(selection));
if (NS_OK != result) { return result; }
if (selection)
{
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
nsCOMPtr<nsIDOMSelectionListener>listener;
listener = do_QueryInterface(mTypeInState);
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
if (listener) {
selection->AddSelectionListener(listener);
}
}
// Init the rules system
InitRules();
result = NS_NewEditorKeyListener(getter_AddRefs(mKeyListenerP), this);
if (NS_OK != result) {
return result;
}
result = NS_NewEditorMouseListener(getter_AddRefs(mMouseListenerP), this);
if (NS_OK != result) {
// drop the key listener if we couldn't get a mouse listener.
mKeyListenerP = do_QueryInterface(0);
return result;
}
result = NS_NewEditorTextListener(getter_AddRefs(mTextListenerP),this);
if (NS_OK !=result) {
// drop the key and mouse listeners
#ifdef DEBUG_TAGUE
printf("nsTextEditor.cpp: failed to get TextEvent Listener\n");
#endif
mMouseListenerP = do_QueryInterface(0);
mKeyListenerP = do_QueryInterface(0);
return result;
}
result = NS_NewEditorDragListener(getter_AddRefs(mDragListenerP), this);
if (NS_OK != result) {
//return result;
mMouseListenerP = do_QueryInterface(0);
mKeyListenerP = do_QueryInterface(0);
mTextListenerP = do_QueryInterface(0);
}
nsCOMPtr<nsIDOMEventReceiver> erP;
result = aDoc->QueryInterface(kIDOMEventReceiverIID, getter_AddRefs(erP));
if (NS_OK != result)
{
mKeyListenerP = do_QueryInterface(0);
mMouseListenerP = do_QueryInterface(0); //dont need these if we cant register them
mTextListenerP = do_QueryInterface(0);
mDragListenerP = do_QueryInterface(0); //dont need these if we cant register them
return result;
}
//cmanske: Shouldn't we check result from this?
erP->AddEventListenerByIID(mKeyListenerP, kIDOMKeyListenerIID);
//erP->AddEventListener(mDragListenerP, kIDOMDragListenerIID);
//erP->AddEventListener(mMouseListenerP, kIDOMMouseListenerIID);
erP->AddEventListenerByIID(mTextListenerP,kIDOMTextListenerIID);
result = NS_OK;
EnableUndo(PR_TRUE);
}
return result;
}
void nsTextEditor::InitRules()
{
// instantiate the rules for this text editor
// XXX: we should be told which set of rules to instantiate
mRules = new nsTextEditRules();
mRules->Init(this);
}
NS_IMETHODIMP nsTextEditor::SetTextProperty(nsIAtom *aProperty,
const nsString *aAttribute,
const nsString *aValue)
{
if (!aProperty)
return NS_ERROR_NULL_POINTER;
if (gNoisy)
{
nsAutoString propString;
aProperty->ToString(propString);
char *propCString = propString.ToNewCString();
if (gNoisy) { printf("---------- nsTextEditor::SetTextProperty %s ----------\n", propCString); }
delete [] propCString;
}
nsresult result=NS_ERROR_NOT_INITIALIZED;
nsCOMPtr<nsIDOMSelection>selection;
result = nsEditor::GetSelection(getter_AddRefs(selection));
if ((NS_SUCCEEDED(result)) && selection)
{
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
PRBool isCollapsed;
selection->GetIsCollapsed(&isCollapsed);
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
if (PR_TRUE==isCollapsed)
{
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
// manipulating text attributes on a collapsed selection only sets state for the next text insertion
SetTypeInStateForProperty(*mTypeInState, aProperty, aAttribute, aValue);
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
}
else
{
// set the text property for all selected ranges
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
nsEditor::BeginTransaction();
nsCOMPtr<nsIEnumerator> enumerator;
enumerator = do_QueryInterface(selection);
if (enumerator)
{
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
enumerator->First();
nsISupports *currentItem;
result = enumerator->CurrentItem(&currentItem);
if ((NS_SUCCEEDED(result)) && (nsnull!=currentItem))
{
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
nsCOMPtr<nsIDOMRange> range( do_QueryInterface(currentItem) );
nsCOMPtr<nsIDOMNode>commonParent;
result = range->GetCommonParent(getter_AddRefs(commonParent));
if ((NS_SUCCEEDED(result)) && commonParent)
{
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
PRInt32 startOffset, endOffset;
range->GetStartOffset(&startOffset);
range->GetEndOffset(&endOffset);
nsCOMPtr<nsIDOMNode> startParent; nsCOMPtr<nsIDOMNode> endParent;
range->GetStartParent(getter_AddRefs(startParent));
range->GetEndParent(getter_AddRefs(endParent));
if (startParent.get()==endParent.get())
{ // the range is entirely contained within a single text node
// commonParent==aStartParent, so get the "real" parent of the selection
startParent->GetParentNode(getter_AddRefs(commonParent));
result = SetTextPropertiesForNode(startParent, commonParent,
startOffset, endOffset,
aProperty, aAttribute, aValue);
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
}
else
{
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
nsCOMPtr<nsIDOMNode> startGrandParent;
startParent->GetParentNode(getter_AddRefs(startGrandParent));
nsCOMPtr<nsIDOMNode> endGrandParent;
endParent->GetParentNode(getter_AddRefs(endGrandParent));
if (NS_SUCCEEDED(result))
{
PRBool canCollapseStyleNode = PR_FALSE;
if (endGrandParent.get()==startGrandParent.get())
{
result = IntermediateNodesAreInline(range, startParent, startOffset,
endParent, endOffset,
canCollapseStyleNode);
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
}
if (NS_SUCCEEDED(result))
{
if (PR_TRUE==canCollapseStyleNode)
{ // the range is between 2 nodes that have a common (immediate) grandparent,
// and any intermediate nodes are just inline style nodes
result = SetTextPropertiesForNodesWithSameParent(startParent,startOffset,
endParent, endOffset,
commonParent,
aProperty, aAttribute, aValue);
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
}
else
{ // the range is between 2 nodes that have no simple relationship
result = SetTextPropertiesForNodeWithDifferentParents(range,
startParent,startOffset,
endParent, endOffset,
commonParent,
aProperty, aAttribute, aValue);
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
}
}
}
}
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
if (NS_SUCCEEDED(result))
{ // compute a range for the selection
// don't want to actually do anything with selection, because
// we are still iterating through it. Just want to create and remember
// an nsIDOMRange, and later add the range to the selection after clearing it.
// XXX: I'm blocked here because nsIDOMSelection doesn't provide a mechanism
// for setting a compound selection yet.
}
}
}
}
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
nsEditor::EndTransaction();
}
if (NS_SUCCEEDED(result))
{ // set the selection
// XXX: can't do anything until I can create ranges
}
}
if (gNoisy) {DebugDumpContent(); } // DEBUG
//HACK TO DRAW CHANGES
HACKForceRedraw();
//END HACK
return result;
}
NS_IMETHODIMP nsTextEditor::GetTextProperty(nsIAtom *aProperty,
const nsString *aAttribute,
const nsString *aValue,
PRBool &aFirst, PRBool &aAny, PRBool &aAll)
{
if (!aProperty)
return NS_ERROR_NULL_POINTER;
if (gNoisy)
{
nsAutoString propString;
aProperty->ToString(propString);
char *propCString = propString.ToNewCString();
if (gNoisy) { printf("nsTextEditor::GetTextProperty %s\n", propCString); }
delete [] propCString;
}
nsresult result=NS_ERROR_NOT_INITIALIZED;
aAny=PR_FALSE;
aAll=PR_TRUE;
aFirst=PR_FALSE;
PRBool first=PR_TRUE;
nsCOMPtr<nsIDOMSelection>selection;
result = nsEditor::GetSelection(getter_AddRefs(selection));
if ((NS_SUCCEEDED(result)) && selection)
{
PRBool isCollapsed;
selection->GetIsCollapsed(&isCollapsed);
nsCOMPtr<nsIEnumerator> enumerator;
enumerator = do_QueryInterface(selection);
if (enumerator)
{
enumerator->First();
nsISupports *currentItem;
result = enumerator->CurrentItem(&currentItem);
// XXX: should be a while loop, to get each separate range
if ((NS_SUCCEEDED(result)) && currentItem)
{
PRBool firstNodeInRange = PR_TRUE; // for each range, set a flag
nsCOMPtr<nsIDOMRange> range( do_QueryInterface(currentItem) );
nsCOMPtr<nsIContentIterator> iter;
result = nsComponentManager::CreateInstance(kCContentIteratorCID, nsnull,
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
kIContentIteratorIID,
getter_AddRefs(iter));
if ((NS_SUCCEEDED(result)) && iter)
{
iter->Init(range);
// loop through the content iterator for each content node
// for each text node:
// get the frame for the content, and from it the style context
// ask the style context about the property
nsCOMPtr<nsIContent> content;
result = iter->CurrentNode(getter_AddRefs(content));
while (NS_COMFALSE == iter->IsDone())
{
if (gNoisy) { printf(" checking node %p\n", content.get()); }
nsCOMPtr<nsIDOMCharacterData>text;
text = do_QueryInterface(content);
if (text)
{
PRBool skipNode = PR_FALSE;
if (PR_FALSE==isCollapsed && PR_TRUE==first && PR_TRUE==firstNodeInRange)
{
firstNodeInRange = PR_FALSE;
PRInt32 startOffset;
range->GetStartOffset(&startOffset);
PRUint32 count;
text->GetLength(&count);
if (startOffset==(PRInt32)count)
{
if (gNoisy) { printf(" skipping node %p\n", content.get()); }
skipNode = PR_TRUE;
}
}
if (PR_FALSE==skipNode)
{
nsCOMPtr<nsIDOMNode>node;
node = do_QueryInterface(content);
if (node)
{
PRBool isSet;
nsCOMPtr<nsIDOMNode>resultNode;
IsTextPropertySetByContent(node, aProperty, aAttribute, aValue, isSet, getter_AddRefs(resultNode));
if (PR_TRUE==first)
{
aFirst = isSet;
first = PR_FALSE;
}
if (PR_TRUE==isSet) {
aAny = PR_TRUE;
}
else {
aAll = PR_FALSE;
}
}
}
}
iter->Next();
iter->CurrentNode(getter_AddRefs(content));
}
}
}
}
}
if (PR_FALSE==aAny) { // make sure that if none of the selection is set, we don't report all is set
aAll = PR_FALSE;
}
if (gNoisy) { printf(" returning first=%d any=%d all=%d\n", aFirst, aAny, aAll); }
return result;
}
void nsTextEditor::IsTextStyleSet(nsIStyleContext *aSC,
nsIAtom *aProperty,
const nsString *aAttribute,
PRBool &aIsSet) const
{
aIsSet = PR_FALSE;
if (aSC && aProperty)
{
nsStyleFont* font = (nsStyleFont*)aSC->GetStyleData(eStyleStruct_Font);
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
if (nsIEditProperty::i==aProperty)
{
aIsSet = PRBool(font->mFont.style & NS_FONT_STYLE_ITALIC);
}
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
else if (nsIEditProperty::b==aProperty)
{ // XXX: check this logic with Peter
aIsSet = PRBool(font->mFont.weight > NS_FONT_WEIGHT_NORMAL);
}
}
}
// this will NOT find aAttribute unless aAttribute has a non-null value
// so singleton attributes like <Table border> will not be matched!
void nsTextEditor::IsTextPropertySetByContent(nsIDOMNode *aNode,
nsIAtom *aProperty,
const nsString *aAttribute,
const nsString *aValue,
PRBool &aIsSet,
nsIDOMNode **aStyleNode) const
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
{
nsresult result;
aIsSet = PR_FALSE; // must be initialized to false for code below to work
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
nsAutoString propName;
aProperty->ToString(propName);
nsCOMPtr<nsIDOMNode>parent;
result = aNode->GetParentNode(getter_AddRefs(parent));
while (NS_SUCCEEDED(result) && parent)
{
nsCOMPtr<nsIDOMElement>element;
element = do_QueryInterface(parent);
if (element)
{
nsString tag;
element->GetTagName(tag);
if (propName.Equals(tag))
{
PRBool found = PR_FALSE;
if (aAttribute)
{
nsAutoString value;
element->GetAttribute(*aAttribute, value);
if (0!=value.Length())
{
if (!aValue) {
found = PR_TRUE;
}
else if (aValue->Equals(value)) {
found = PR_TRUE;
}
else { // we found the prop with the attribute, but the value doesn't match
break;
}
}
}
else {
found = PR_TRUE;
}
if (PR_TRUE==found)
{
aIsSet = PR_TRUE;
break;
}
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
}
}
nsCOMPtr<nsIDOMNode>temp;
result = parent->GetParentNode(getter_AddRefs(temp));
if (NS_SUCCEEDED(result) && temp) {
parent = do_QueryInterface(temp);
}
else {
parent = do_QueryInterface(nsnull);
}
}
}
NS_IMETHODIMP nsTextEditor::RemoveTextProperty(nsIAtom *aProperty, const nsString *aAttribute)
{
if (!aProperty)
return NS_ERROR_NULL_POINTER;
if (gNoisy)
{
nsAutoString propString;
aProperty->ToString(propString);
char *propCString = propString.ToNewCString();
if (gNoisy) { printf("---------- nsTextEditor::RemoveTextProperty %s ----------\n", propCString); }
delete [] propCString;
}
nsresult result=NS_ERROR_NOT_INITIALIZED;
nsCOMPtr<nsIDOMSelection>selection;
result = nsEditor::GetSelection(getter_AddRefs(selection));
if ((NS_SUCCEEDED(result)) && selection)
{
PRBool isCollapsed;
selection->GetIsCollapsed(&isCollapsed);
if (PR_TRUE==isCollapsed)
{
// manipulating text attributes on a collapsed selection only sets state for the next text insertion
SetTypeInStateForProperty(*mTypeInState, aProperty, aAttribute, nsnull);
}
else
{
nsEditor::BeginTransaction();
nsCOMPtr<nsIDOMNode> startParent, endParent;
PRInt32 startOffset, endOffset;
nsCOMPtr<nsIEnumerator> enumerator;
enumerator = do_QueryInterface(selection);
if (enumerator)
{
enumerator->First();
nsISupports *currentItem;
result = enumerator->CurrentItem(&currentItem);
if ((NS_SUCCEEDED(result)) && (nsnull!=currentItem))
{
nsCOMPtr<nsIDOMRange> range( do_QueryInterface(currentItem) );
nsCOMPtr<nsIDOMNode>commonParent;
result = range->GetCommonParent(getter_AddRefs(commonParent));
if ((NS_SUCCEEDED(result)) && commonParent)
{
range->GetStartOffset(&startOffset);
range->GetEndOffset(&endOffset);
range->GetStartParent(getter_AddRefs(startParent));
range->GetEndParent(getter_AddRefs(endParent));
if (startParent.get()==endParent.get())
{ // the range is entirely contained within a single text node
// commonParent==aStartParent, so get the "real" parent of the selection
startParent->GetParentNode(getter_AddRefs(commonParent));
result = RemoveTextPropertiesForNode(startParent, commonParent,
startOffset, endOffset,
aProperty, nsnull);
}
else
{
nsCOMPtr<nsIDOMNode> startGrandParent;
startParent->GetParentNode(getter_AddRefs(startGrandParent));
nsCOMPtr<nsIDOMNode> endGrandParent;
endParent->GetParentNode(getter_AddRefs(endGrandParent));
if (NS_SUCCEEDED(result))
{
PRBool canCollapseStyleNode = PR_FALSE;
if (endGrandParent.get()==startGrandParent.get())
{
result = IntermediateNodesAreInline(range, startParent, startOffset,
endParent, endOffset,
canCollapseStyleNode);
}
if (NS_SUCCEEDED(result))
{
if (PR_TRUE==canCollapseStyleNode)
{ // the range is between 2 nodes that have a common (immediate) grandparent,
// and any intermediate nodes are just inline style nodes
result = RemoveTextPropertiesForNodesWithSameParent(startParent,startOffset,
endParent, endOffset,
commonParent,
aProperty, nsnull);
}
else
{ // the range is between 2 nodes that have no simple relationship
result = RemoveTextPropertiesForNodeWithDifferentParents(startParent,startOffset,
endParent, endOffset,
commonParent,
aProperty, nsnull);
}
}
}
}
if (NS_SUCCEEDED(result))
{ // compute a range for the selection
// don't want to actually do anything with selection, because
// we are still iterating through it. Just want to create and remember
// an nsIDOMRange, and later add the range to the selection after clearing it.
// XXX: I'm blocked here because nsIDOMSelection doesn't provide a mechanism
// for setting a compound selection yet.
}
}
}
}
nsEditor::EndTransaction();
if (NS_SUCCEEDED(result))
{
selection->Collapse(startParent, startOffset);
selection->Extend(endParent, endOffset);
}
}
}
return result;
}
NS_IMETHODIMP nsTextEditor::DeleteSelection(nsIEditor::Direction aDir)
{
if (!mRules) { return NS_ERROR_NOT_INITIALIZED; }
nsCOMPtr<nsIDOMSelection> selection;
PRBool cancel= PR_FALSE;
nsresult result = nsEditor::BeginTransaction();
if (NS_FAILED(result)) { return result; }
// pre-process
nsEditor::GetSelection(getter_AddRefs(selection));
1999-04-12 16:01:32 +04:00
nsTextRulesInfo ruleInfo(nsTextEditRules::kDeleteSelection);
1999-04-26 18:08:52 +04:00
ruleInfo.dir = aDir;
1999-04-12 16:01:32 +04:00
result = mRules->WillDoAction(selection, &ruleInfo, &cancel);
if ((PR_FALSE==cancel) && (NS_SUCCEEDED(result)))
{
result = nsEditor::DeleteSelection(aDir);
// post-process
1999-04-12 16:01:32 +04:00
result = mRules->DidDoAction(selection, &ruleInfo, result);
}
nsresult endTxnResult = nsEditor::EndTransaction(); // don't return this result!
NS_ASSERTION ((NS_SUCCEEDED(endTxnResult)), "bad end transaction result");
// XXXX: Horrible hack! We are doing this because
// of an error in Gecko which is not rendering the
// document after a change via the DOM - gpk 2/13/99
// BEGIN HACK!!!
HACKForceRedraw();
// END HACK
return result;
}
NS_IMETHODIMP nsTextEditor::InsertText(const nsString& aStringToInsert)
{
if (!mRules) { return NS_ERROR_NOT_INITIALIZED; }
nsCOMPtr<nsIDOMSelection> selection;
PRBool cancel= PR_FALSE;
// pre-process
nsEditor::GetSelection(getter_AddRefs(selection));
1999-04-12 16:01:32 +04:00
nsString resultString;
PlaceholderTxn *placeholderTxn=nsnull;
1999-04-12 16:01:32 +04:00
nsTextRulesInfo ruleInfo(nsTextEditRules::kInsertText);
ruleInfo.placeTxn = &placeholderTxn;
ruleInfo.inString = &aStringToInsert;
ruleInfo.outString = &resultString;
ruleInfo.typeInState = *mTypeInState;
1999-04-12 16:01:32 +04:00
nsresult result = mRules->WillDoAction(selection, &ruleInfo, &cancel);
if ((PR_FALSE==cancel) && (NS_SUCCEEDED(result)))
{
result = nsEditor::InsertText(resultString);
// post-process
1999-04-12 16:01:32 +04:00
result = mRules->DidDoAction(selection, &ruleInfo, result);
}
if (placeholderTxn)
placeholderTxn->SetAbsorb(PR_FALSE); // this ends the merging of txns into placeholderTxn
// BEGIN HACK!!!
HACKForceRedraw();
// END HACK
return result;
}
NS_IMETHODIMP nsTextEditor::InsertBreak()
{
// For plainttext just pass newlines through
nsAutoString key;
key += '\n';
return InsertText(key);
}
NS_IMETHODIMP nsTextEditor::EnableUndo(PRBool aEnable)
{
return nsEditor::EnableUndo(aEnable);
}
NS_IMETHODIMP nsTextEditor::Undo(PRUint32 aCount)
{
nsCOMPtr<nsIDOMSelection> selection;
PRBool cancel= PR_FALSE;
// pre-process
nsEditor::GetSelection(getter_AddRefs(selection));
1999-04-12 16:01:32 +04:00
nsTextRulesInfo ruleInfo(nsTextEditRules::kUndo);
nsresult result = mRules->WillDoAction(selection, &ruleInfo, &cancel);
if ((PR_FALSE==cancel) && (NS_SUCCEEDED(result)))
{
result = nsEditor::Undo(aCount);
nsEditor::GetSelection(getter_AddRefs(selection));
1999-04-12 16:01:32 +04:00
result = mRules->DidDoAction(selection, &ruleInfo, result);
}
return result;
}
NS_IMETHODIMP nsTextEditor::CanUndo(PRBool &aIsEnabled, PRBool &aCanUndo)
{
return nsEditor::CanUndo(aIsEnabled, aCanUndo);
}
NS_IMETHODIMP nsTextEditor::Redo(PRUint32 aCount)
{
nsCOMPtr<nsIDOMSelection> selection;
PRBool cancel= PR_FALSE;
// pre-process
nsEditor::GetSelection(getter_AddRefs(selection));
1999-04-12 16:01:32 +04:00
nsTextRulesInfo ruleInfo(nsTextEditRules::kRedo);
nsresult result = mRules->WillDoAction(selection, &ruleInfo, &cancel);
if ((PR_FALSE==cancel) && (NS_SUCCEEDED(result)))
{
result = nsEditor::Redo(aCount);
nsEditor::GetSelection(getter_AddRefs(selection));
1999-04-12 16:01:32 +04:00
result = mRules->DidDoAction(selection, &ruleInfo, result);
}
return result;
}
NS_IMETHODIMP nsTextEditor::CanRedo(PRBool &aIsEnabled, PRBool &aCanRedo)
{
return nsEditor::CanRedo(aIsEnabled, aCanRedo);
}
NS_IMETHODIMP nsTextEditor::BeginTransaction()
{
return nsEditor::BeginTransaction();
}
NS_IMETHODIMP nsTextEditor::EndTransaction()
{
return nsEditor::EndTransaction();
}
NS_IMETHODIMP nsTextEditor::MoveSelectionUp(nsIAtom *aIncrement, PRBool aExtendSelection)
{
return NS_ERROR_NOT_IMPLEMENTED;
}
NS_IMETHODIMP nsTextEditor::MoveSelectionDown(nsIAtom *aIncrement, PRBool aExtendSelection)
{
return NS_ERROR_NOT_IMPLEMENTED;
}
NS_IMETHODIMP nsTextEditor::MoveSelectionNext(nsIAtom *aIncrement, PRBool aExtendSelection)
{
return NS_ERROR_NOT_IMPLEMENTED;
}
NS_IMETHODIMP nsTextEditor::MoveSelectionPrevious(nsIAtom *aIncrement, PRBool aExtendSelection)
{
return NS_ERROR_NOT_IMPLEMENTED;
}
NS_IMETHODIMP nsTextEditor::SelectNext(nsIAtom *aIncrement, PRBool aExtendSelection)
{
return NS_ERROR_NOT_IMPLEMENTED;
}
NS_IMETHODIMP nsTextEditor::SelectPrevious(nsIAtom *aIncrement, PRBool aExtendSelection)
{
return NS_ERROR_NOT_IMPLEMENTED;
}
NS_IMETHODIMP nsTextEditor::SelectAll()
{
return nsEditor::SelectAll();
}
NS_IMETHODIMP nsTextEditor::ScrollUp(nsIAtom *aIncrement)
{
return NS_ERROR_NOT_IMPLEMENTED;
}
NS_IMETHODIMP nsTextEditor::ScrollDown(nsIAtom *aIncrement)
{
return NS_ERROR_NOT_IMPLEMENTED;
}
NS_IMETHODIMP nsTextEditor::ScrollIntoView(PRBool aScrollToBegin)
{
return nsEditor::ScrollIntoView(aScrollToBegin);
}
NS_IMETHODIMP nsTextEditor::Cut()
{
return nsEditor::Cut();
}
NS_IMETHODIMP nsTextEditor::Copy()
{
return nsEditor::Copy();
}
NS_IMETHODIMP nsTextEditor::Paste()
{
return nsEditor::Paste();
}
1999-03-30 02:01:26 +04:00
NS_IMETHODIMP nsTextEditor::Insert(nsString& aInputString)
{
1999-03-30 02:01:26 +04:00
printf("nsTextEditor::Insert not yet implemented\n");
return NS_ERROR_NOT_IMPLEMENTED;
}
NS_IMETHODIMP nsTextEditor::OutputText(nsString& aOutputString)
{
return OutputText(nsnull,&aOutputString,nsnull);
}
NS_IMETHODIMP nsTextEditor::OutputText(nsIOutputStream* aOutputStream, nsString* aCharsetOverride)
{
return OutputText(aOutputStream,nsnull,aCharsetOverride);
}
NS_IMETHODIMP nsTextEditor::OutputText(nsIOutputStream* aOutputStream, nsString* aOutputString, nsString* aCharsetOverride)
{
nsresult rv = NS_ERROR_FAILURE;
nsCOMPtr<nsIPresShell> shell;
GetPresShell(getter_AddRefs(shell));
if (shell) {
nsCOMPtr<nsIDocument> doc;
shell->GetDocument(getter_AddRefs(doc));
if (doc) {
nsString buffer;
doc->CreateXIF(buffer);
nsAutoString charset;
rv = doc->GetDocumentCharacterSet(charset);
if(NS_FAILED(rv)) {
charset = "ISO-8859-1";
}
nsIParser* parser;
static NS_DEFINE_IID(kCParserIID, NS_IPARSER_IID);
static NS_DEFINE_IID(kCParserCID, NS_PARSER_IID);
rv = nsComponentManager::CreateInstance(kCParserCID,
nsnull,
kCParserIID,
(void **)&parser);
if (NS_SUCCEEDED(rv)) {
nsIHTMLContentSink* sink = nsnull;
if (NS_SUCCEEDED(rv))
{
if (aOutputString != nsnull)
rv = NS_New_HTMLToTXT_SinkStream(&sink,aOutputString);
else if (aOutputStream != nsnull)
rv = NS_New_HTMLToTXT_SinkStream(&sink,aOutputStream,aCharsetOverride);
if (sink && NS_SUCCEEDED(rv))
{
parser->SetContentSink(sink);
parser->SetDocumentCharset(charset, kCharsetFromPreviousLoading);
nsIDTD* dtd = nsnull;
rv = NS_NewXIFDTD(&dtd);
if (NS_OK == rv) {
parser->RegisterDTD(dtd);
parser->Parse(buffer, 0, "text/xif",PR_FALSE,PR_TRUE);
}
NS_IF_RELEASE(dtd);
NS_IF_RELEASE(sink);
NS_IF_RELEASE(parser);
}
}
}
}
}
return rv;
}
NS_IMETHODIMP nsTextEditor::OutputHTML(nsString& aOutputString)
{
return OutputHTML(nsnull,&aOutputString,nsnull);
}
NS_IMETHODIMP nsTextEditor::OutputHTML(nsIOutputStream* aOutputStream,nsString* aCharsetOverride)
{
return OutputHTML(aOutputStream,nsnull,aCharsetOverride);
}
NS_IMETHODIMP nsTextEditor::OutputHTML(nsIOutputStream* aOutputStream, nsString* aOutputString, nsString* aCharsetOverride)
{
nsresult rv = NS_ERROR_FAILURE;
nsCOMPtr<nsIPresShell> shell;
GetPresShell(getter_AddRefs(shell));
if (shell) {
nsCOMPtr<nsIDocument> doc;
shell->GetDocument(getter_AddRefs(doc));
if (doc) {
nsString buffer;
doc->CreateXIF(buffer);
nsAutoString charset;
rv = doc->GetDocumentCharacterSet(charset);
if(NS_FAILED(rv)) {
charset = "ISO-8859-1";
}
nsIParser* parser;
static NS_DEFINE_IID(kCParserIID, NS_IPARSER_IID);
static NS_DEFINE_IID(kCParserCID, NS_PARSER_IID);
rv = nsComponentManager::CreateInstance(kCParserCID,
nsnull,
kCParserIID,
(void **)&parser);
if (NS_OK == rv) {
nsIHTMLContentSink* sink = nsnull;
if (aOutputStream)
rv = NS_New_HTML_ContentSinkStream(&sink,aOutputStream,aCharsetOverride);
else if (aOutputString)
rv = NS_New_HTML_ContentSinkStream(&sink,aOutputString);
if (sink && NS_SUCCEEDED(rv)) {
if (NS_OK == rv) {
parser->SetContentSink(sink);
parser->SetDocumentCharset(charset, kCharsetFromPreviousLoading);
nsIDTD* dtd = nsnull;
rv = NS_NewXIFDTD(&dtd);
if (NS_OK == rv) {
parser->RegisterDTD(dtd);
parser->Parse(buffer, 0, "text/xif",PR_FALSE,PR_TRUE);
}
NS_IF_RELEASE(dtd);
NS_IF_RELEASE(sink);
}
}
NS_RELEASE(parser);
}
}
}
return rv;
}
NS_IMETHODIMP nsTextEditor::SetTextPropertiesForNode(nsIDOMNode *aNode,
nsIDOMNode *aParent,
PRInt32 aStartOffset,
PRInt32 aEndOffset,
nsIAtom *aPropName,
const nsString *aAttribute,
const nsString *aValue)
{
if (gNoisy) { printf("nsTextEditor::SetTextPropertyForNode\n"); }
nsresult result=NS_OK;
// verify that aNode is a text node
nsCOMPtr<nsIDOMCharacterData>nodeAsChar;
nodeAsChar = do_QueryInterface(aNode);
if (!nodeAsChar)
return NS_ERROR_FAILURE;
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
PRBool textPropertySet;
nsCOMPtr<nsIDOMNode>resultNode;
IsTextPropertySetByContent(aNode, aPropName, aAttribute, aValue, textPropertySet, getter_AddRefs(resultNode));
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
if (PR_FALSE==textPropertySet)
{
nsAutoString tag;
aPropName->ToString(tag);
if (NS_SUCCEEDED(result))
{
nsCOMPtr<nsIDOMNode>newStyleNode;
if (NS_SUCCEEDED(result))
{
result = nsEditor::CreateNode(tag, aParent, 0, getter_AddRefs(newStyleNode));
if (NS_SUCCEEDED(result) && newStyleNode)
{
1999-04-21 02:02:02 +04:00
result = MoveContentOfNodeIntoNewParent(aNode, newStyleNode, aStartOffset, aEndOffset);
if (NS_SUCCEEDED(result) && newStyleNode)
{
if (aAttribute)
{
nsCOMPtr<nsIDOMElement> newStyleElement;
newStyleElement = do_QueryInterface(newStyleNode);
nsAutoString value;
if (aValue) {
value = *aValue;
}
// XXX should be a call to editor to change attribute!
result = newStyleElement->SetAttribute(*aAttribute, value);
}
}
}
}
}
}
return result;
}
1999-04-21 02:02:02 +04:00
NS_IMETHODIMP nsTextEditor::MoveContentOfNodeIntoNewParent(nsIDOMNode *aNode,
nsIDOMNode *aNewParentNode,
PRInt32 aStartOffset,
PRInt32 aEndOffset)
{
if (!aNode || !aNewParentNode) { return NS_ERROR_NULL_POINTER; }
1999-04-21 02:02:02 +04:00
if (gNoisy) { printf("nsTextEditor::MoveContentOfNodeIntoNewParent\n"); }
nsresult result=NS_OK;
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
PRUint32 count;
result = GetLengthOfDOMNode(aNode, count);
if (NS_SUCCEEDED(result))
{
nsCOMPtr<nsIDOMNode>newChildNode; // this will be the child node we move into the new style node
// split the node at the start offset unless the split would create an empty node
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
if (aStartOffset!=0)
{
result = nsEditor::SplitNode(aNode, aStartOffset, getter_AddRefs(newChildNode));
if (gNoisy) { printf("* split created left node %p\n", newChildNode.get());}
if (gNoisy) {DebugDumpContent(); } // DEBUG
}
if (NS_SUCCEEDED(result))
{
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
if (aEndOffset!=(PRInt32)count)
{
result = nsEditor::SplitNode(aNode, aEndOffset-aStartOffset, getter_AddRefs(newChildNode));
if (gNoisy) { printf("* split created left node %p\n", newChildNode.get());}
if (gNoisy) {DebugDumpContent(); } // DEBUG
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
}
else
{
newChildNode = do_QueryInterface(aNode);
if (gNoisy) { printf("* second split not required, new text node set to aNode = %p\n", newChildNode.get());}
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
}
if (NS_SUCCEEDED(result))
{
// move aNewParentNode into the right location
// optimization: if all we're doing is changing a value for an existing attribute for the
// entire selection, then just twiddle the existing style node
PRBool done = PR_FALSE; // set to true in optimized case if we can really do the optimization
/*
if (aAttribute && aValue && (0==aStartOffset) && (aEndOffset==(PRInt32)count))
{
// ??? can we really compute this?
}
*/
if (PR_FALSE==done)
{
// if we've ended up with an empty text node, just delete it and we're done
nsCOMPtr<nsIDOMCharacterData>newChildNodeAsChar;
newChildNodeAsChar = do_QueryInterface(newChildNode);
PRUint32 newChildNodeLength;
if (newChildNodeAsChar)
{
newChildNodeAsChar->GetLength(&newChildNodeLength);
if (0==newChildNodeLength)
{
result = nsEditor::DeleteNode(newChildNode);
done = PR_TRUE;
}
}
// move the new child node into the new parent
if (PR_FALSE==done)
{
// first, move the new parent into the correct location
PRInt32 offsetInParent;
nsCOMPtr<nsIDOMNode>parentNode;
result = aNode->GetParentNode(getter_AddRefs(parentNode));
if (NS_SUCCEEDED(result))
{
result = nsEditor::DeleteNode(aNewParentNode);
if (NS_SUCCEEDED(result))
{ // must get child offset AFTER delete of aNewParentNode!
result = nsIEditorSupport::GetChildOffset(aNode, parentNode, offsetInParent);
if (NS_SUCCEEDED(result))
{
result = nsEditor::InsertNode(aNewParentNode, parentNode, offsetInParent);
if (NS_SUCCEEDED(result))
{
// then move the new child into the new parent node
result = nsEditor::DeleteNode(newChildNode);
if (NS_SUCCEEDED(result))
{
result = nsEditor::InsertNode(newChildNode, aNewParentNode, 0);
if (NS_SUCCEEDED(result))
{ // set the selection
nsCOMPtr<nsIDOMSelection>selection;
result = nsEditor::GetSelection(getter_AddRefs(selection));
if (NS_SUCCEEDED(result))
{
selection->Collapse(newChildNode, 0);
PRInt32 endOffset = aEndOffset-aStartOffset;
selection->Extend(newChildNode, endOffset);
}
}
}
}
}
}
}
}
}
}
}
}
return result;
}
// returns the number of things inside aNode.
// If aNode is text, returns number of characters. If not, returns number of children nodes.
NS_IMETHODIMP nsTextEditor::GetLengthOfDOMNode(nsIDOMNode *aNode, PRUint32 &aCount) const
{
aCount = 0;
if (!aNode) { return NS_ERROR_NULL_POINTER; }
nsresult result=NS_OK;
nsCOMPtr<nsIDOMCharacterData>nodeAsChar;
nodeAsChar = do_QueryInterface(aNode);
if (nodeAsChar) {
nodeAsChar->GetLength(&aCount);
}
else
{
PRBool hasChildNodes;
aNode->HasChildNodes(&hasChildNodes);
if (PR_TRUE==hasChildNodes)
{
nsCOMPtr<nsIDOMNodeList>nodeList;
result = aNode->GetChildNodes(getter_AddRefs(nodeList));
if (NS_SUCCEEDED(result) && nodeList) {
nodeList->GetLength(&aCount);
}
}
}
return result;
}
// content-based inline vs. block query
NS_IMETHODIMP
nsTextEditor::IsNodeInline(nsIDOMNode *aNode, PRBool &aIsInline) const
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
{
// this is a content-based implementation
if (!aNode) { return NS_ERROR_NULL_POINTER; }
nsresult result;
aIsInline = PR_FALSE;
nsCOMPtr<nsIDOMElement>element;
element = do_QueryInterface(aNode);
if (element)
{
nsAutoString tag;
result = element->GetTagName(tag);
if (NS_SUCCEEDED(result))
{
nsIAtom *tagAtom = NS_NewAtom(tag);
if (!tagAtom) { return NS_ERROR_NULL_POINTER; }
if (tagAtom==nsIEditProperty::a ||
tagAtom==nsIEditProperty::b ||
tagAtom==nsIEditProperty::big ||
tagAtom==nsIEditProperty::font ||
tagAtom==nsIEditProperty::i ||
tagAtom==nsIEditProperty::span ||
tagAtom==nsIEditProperty::small ||
tagAtom==nsIEditProperty::strike ||
tagAtom==nsIEditProperty::sub ||
tagAtom==nsIEditProperty::sup ||
tagAtom==nsIEditProperty::tt ||
tagAtom==nsIEditProperty::u )
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
{
aIsInline = PR_TRUE;
}
}
}
return NS_OK;
}
NS_IMETHODIMP
nsTextEditor::GetBlockParent(nsIDOMNode *aNode, nsIDOMElement **aBlockParent) const
{
nsresult result = NS_OK;
if (!aBlockParent) {return NS_ERROR_NULL_POINTER;}
*aBlockParent = nsnull;
nsCOMPtr<nsIDOMNode>parent;
nsCOMPtr<nsIDOMNode>temp;
result = aNode->GetParentNode(getter_AddRefs(parent));
while (NS_SUCCEEDED(result) && parent)
{
PRBool isInline;
result = IsNodeInline(parent, isInline);
if (PR_FALSE==isInline)
{
parent->QueryInterface(nsIDOMElement::GetIID(), (void**)aBlockParent);
break;
}
result = parent->GetParentNode(getter_AddRefs(temp));
parent = do_QueryInterface(temp);
}
if (gNoisy) { printf("GetBlockParent for %p returning parent %p\n", aNode, *aBlockParent); }
return result;
}
NS_IMETHODIMP
nsTextEditor::GetBlockDelimitedContent(nsIDOMNode *aChild,
nsIDOMNode **aLeftNode,
nsIDOMNode **aRightNode) const
{
nsresult result = NS_OK;
if (!aChild || !aLeftNode || !aRightNode) {return NS_ERROR_NULL_POINTER;}
*aLeftNode = aChild;
*aRightNode = aChild;
nsCOMPtr<nsIDOMNode>sibling;
result = aChild->GetPreviousSibling(getter_AddRefs(sibling));
while ((NS_SUCCEEDED(result)) && sibling)
{
PRBool isInline;
IsNodeInline(sibling, isInline);
if (PR_FALSE==isInline)
{
nsCOMPtr<nsIDOMCharacterData>nodeAsText = do_QueryInterface(sibling);
if (!nodeAsText) {
break;
}
}
*aLeftNode = sibling;
result = (*aLeftNode)->GetPreviousSibling(getter_AddRefs(sibling));
}
NS_ADDREF((*aLeftNode));
// now do the right side
result = aChild->GetNextSibling(getter_AddRefs(sibling));
while ((NS_SUCCEEDED(result)) && sibling)
{
PRBool isInline;
IsNodeInline(sibling, isInline);
if (PR_FALSE==isInline)
{
nsCOMPtr<nsIDOMCharacterData>nodeAsText = do_QueryInterface(sibling);
if (!nodeAsText) {
break;
}
}
*aRightNode = sibling;
result = (*aRightNode)->GetNextSibling(getter_AddRefs(sibling));
}
NS_ADDREF((*aRightNode));
if (gNoisy) { printf("GetBlockDelimitedContent returning %p %p\n",
(*aLeftNode), (*aRightNode)); }
return result;
}
NS_IMETHODIMP
nsTextEditor::GetBlockRanges(nsIDOMRange *aRange, nsISupportsArray *aSubRanges) const
{
if (!aRange || !aSubRanges) {return NS_ERROR_NULL_POINTER;}
nsresult result;
nsCOMPtr<nsIContentIterator>iter;
result = nsComponentManager::CreateInstance(kCContentIteratorCID, nsnull,
kIContentIteratorIID, getter_AddRefs(iter));
if ((NS_SUCCEEDED(result)) && iter)
{
nsCOMPtr<nsIDOMRange> lastRange;
iter->Init(aRange);
nsCOMPtr<nsIContent> currentContent;
iter->CurrentNode(getter_AddRefs(currentContent));
while (NS_COMFALSE == iter->IsDone())
{
nsCOMPtr<nsIDOMNode>currentNode = do_QueryInterface(currentContent);
if (currentNode)
{
PRBool isInlineOrText;
result = IsNodeInline(currentNode, isInlineOrText);
if (PR_FALSE==isInlineOrText)
{
PRUint16 nodeType;
currentNode->GetNodeType(&nodeType);
if (nsIDOMNode::TEXT_NODE == nodeType) {
isInlineOrText = PR_TRUE;
}
}
if (PR_TRUE==isInlineOrText)
{
nsCOMPtr<nsIDOMNode>leftNode;
nsCOMPtr<nsIDOMNode>rightNode;
result = GetBlockDelimitedContent(currentNode,
getter_AddRefs(leftNode),
getter_AddRefs(rightNode));
if (gNoisy) {printf("currentNode %p has block content (%p,%p)\n", currentNode.get(), leftNode.get(), rightNode.get());}
if ((NS_SUCCEEDED(result)) && leftNode && rightNode)
{
// add range to the list if it doesn't overlap with the previous range
PRBool addRange=PR_TRUE;
if (lastRange)
{
nsCOMPtr<nsIDOMNode> lastStartNode;
nsCOMPtr<nsIDOMElement> blockParentOfLastStartNode;
lastRange->GetStartParent(getter_AddRefs(lastStartNode));
result = GetBlockParent(lastStartNode, getter_AddRefs(blockParentOfLastStartNode));
if ((NS_SUCCEEDED(result)) && blockParentOfLastStartNode)
{
if (gNoisy) {printf("lastStartNode %p has block parent %p\n", lastStartNode.get(), blockParentOfLastStartNode.get());}
nsCOMPtr<nsIDOMElement> blockParentOfLeftNode;
result = GetBlockParent(leftNode, getter_AddRefs(blockParentOfLeftNode));
if ((NS_SUCCEEDED(result)) && blockParentOfLeftNode)
{
if (gNoisy) {printf("leftNode %p has block parent %p\n", leftNode.get(), blockParentOfLeftNode.get());}
if (blockParentOfLastStartNode==blockParentOfLeftNode) {
addRange = PR_FALSE;
}
}
}
}
if (PR_TRUE==addRange)
{
if (gNoisy) {printf("adding range, setting lastRange with start node %p\n", leftNode.get());}
nsCOMPtr<nsIDOMRange> range;
result = nsComponentManager::CreateInstance(kCRangeCID, nsnull,
kIDOMRangeIID, getter_AddRefs(range));
if ((NS_SUCCEEDED(result)) && range)
{ // initialize the range
range->SetStart(leftNode, 0);
range->SetEnd(rightNode, 0);
aSubRanges->AppendElement(range);
lastRange = do_QueryInterface(range);
}
}
}
}
}
/* do not check result here, and especially do not return the result code.
* we rely on iter->IsDone to tell us when the iteration is complete
*/
iter->Next();
iter->CurrentNode(getter_AddRefs(currentContent));
}
}
return result;
}
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
NS_IMETHODIMP
nsTextEditor::IntermediateNodesAreInline(nsIDOMRange *aRange,
nsIDOMNode *aStartNode,
PRInt32 aStartOffset,
nsIDOMNode *aEndNode,
PRInt32 aEndOffset,
PRBool &aResult) const
{
aResult = PR_TRUE; // init out param. we assume the condition is true unless we find a node that violates it
if (!aStartNode || !aEndNode || !aRange) { return NS_ERROR_NULL_POINTER; }
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
nsCOMPtr<nsIContentIterator>iter;
nsresult result;
result = nsComponentManager::CreateInstance(kCContentIteratorCID, nsnull,
kIContentIteratorIID, getter_AddRefs(iter));
//XXX: maybe CreateInstance is expensive, and I should keep around a static iter?
// as long as this method can't be called recursively or re-entrantly!
if ((NS_SUCCEEDED(result)) && iter)
{
nsCOMPtr<nsIContent>startContent;
startContent = do_QueryInterface(aStartNode);
nsCOMPtr<nsIContent>endContent;
endContent = do_QueryInterface(aEndNode);
if (startContent && endContent)
{
iter->Init(aRange);
nsCOMPtr<nsIContent> content;
iter->CurrentNode(getter_AddRefs(content));
while (NS_COMFALSE == iter->IsDone())
{
if ((content.get() != startContent.get()) &&
(content.get() != endContent.get()))
{
nsCOMPtr<nsIDOMNode>currentNode;
currentNode = do_QueryInterface(content);
PRBool isInline=PR_FALSE;
IsNodeInline(currentNode, isInline);
if (PR_FALSE==isInline)
{
nsCOMPtr<nsIDOMCharacterData>nodeAsText;
nodeAsText = do_QueryInterface(currentNode);
if (!nodeAsText) // text nodes don't count in this check, so ignore them
{
aResult = PR_FALSE;
break;
}
}
}
/* do not check result here, and especially do not return the result code.
* we rely on iter->IsDone to tell us when the iteration is complete
*/
iter->Next();
iter->CurrentNode(getter_AddRefs(content));
}
}
}
return result;
}
/* this should only get called if the only intervening nodes are inline style nodes */
NS_IMETHODIMP
nsTextEditor::SetTextPropertiesForNodesWithSameParent(nsIDOMNode *aStartNode,
PRInt32 aStartOffset,
nsIDOMNode *aEndNode,
PRInt32 aEndOffset,
nsIDOMNode *aParent,
nsIAtom *aPropName,
const nsString *aAttribute,
const nsString *aValue)
{
if (gNoisy) { printf("nsTextEditor::SetTextPropertiesForNodesWithSameParent\n"); }
nsresult result=NS_OK;
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
PRBool textPropertySet;
nsCOMPtr<nsIDOMNode>resultNode;
IsTextPropertySetByContent(aStartNode, aPropName, aAttribute, aValue, textPropertySet, getter_AddRefs(resultNode));
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
if (PR_FALSE==textPropertySet)
{
1999-04-21 02:02:02 +04:00
nsAutoString tag;
aPropName->ToString(tag);
// create the new style node, which will be the new parent for the selected nodes
nsCOMPtr<nsIDOMNode>newStyleNode;
result = nsEditor::CreateNode(tag, aParent, 0, getter_AddRefs(newStyleNode));
if (NS_SUCCEEDED(result) && newStyleNode)
{
result = MoveContiguousContentIntoNewParent(aStartNode, aStartOffset, aEndNode, aEndOffset, aParent, newStyleNode);
if (NS_SUCCEEDED(result) && aAttribute)
{
nsCOMPtr<nsIDOMElement> newStyleElement;
newStyleElement = do_QueryInterface(newStyleNode);
nsAutoString value;
if (aValue) {
value = *aValue;
}
result = newStyleElement->SetAttribute(*aAttribute, value);
}
}
}
return result;
}
NS_IMETHODIMP nsTextEditor::MoveContiguousContentIntoNewParent(nsIDOMNode *aStartNode,
PRInt32 aStartOffset,
nsIDOMNode *aEndNode,
PRInt32 aEndOffset,
nsIDOMNode *aGrandParentNode,
nsIDOMNode *aNewParentNode)
{
if (!aStartNode || !aEndNode || !aNewParentNode) { return NS_ERROR_NULL_POINTER; }
if (gNoisy) { printf("nsTextEditor::MoveContiguousContentIntoNewParent\n"); }
nsresult result = NS_OK;
nsCOMPtr<nsIDOMNode>newLeftNode; // this will be the middle text node
if (0!=aStartOffset) {
result = nsEditor::SplitNode(aStartNode, aStartOffset, getter_AddRefs(newLeftNode));
}
if (NS_SUCCEEDED(result))
{
PRUint32 count;
GetLengthOfDOMNode(aEndNode, count);
nsCOMPtr<nsIDOMNode>newRightNode; // this will be the middle text node
if ((PRInt32)count!=aEndOffset) {
result = nsEditor::SplitNode(aEndNode, aEndOffset, getter_AddRefs(newRightNode));
}
else {
newRightNode = do_QueryInterface(aEndNode);
}
if (NS_SUCCEEDED(result))
{
1999-04-21 02:02:02 +04:00
PRInt32 offsetInParent;
if (newLeftNode) {
result = nsIEditorSupport::GetChildOffset(newLeftNode, aGrandParentNode, offsetInParent);
}
else {
1999-04-21 02:02:02 +04:00
offsetInParent = -1; // relies on +1 below in call to CreateNode
}
if (NS_SUCCEEDED(result))
{
1999-04-21 02:02:02 +04:00
// wherever aNewParentNode is, delete it and insert it into aGrandParentNode
result = nsEditor::DeleteNode(aNewParentNode);
if (NS_SUCCEEDED(result))
1999-04-21 02:02:02 +04:00
{
result = nsEditor::InsertNode(aNewParentNode, aGrandParentNode, offsetInParent);
if (NS_SUCCEEDED(result))
1999-04-21 02:02:02 +04:00
{ // move the right half of the start node into the new parent node
nsCOMPtr<nsIDOMNode>intermediateNode;
result = aStartNode->GetNextSibling(getter_AddRefs(intermediateNode));
if (NS_SUCCEEDED(result))
{
result = nsEditor::DeleteNode(aStartNode);
if (NS_SUCCEEDED(result))
{
PRInt32 childIndex=0;
1999-04-21 02:02:02 +04:00
result = nsEditor::InsertNode(aStartNode, aNewParentNode, childIndex);
childIndex++;
if (NS_SUCCEEDED(result))
1999-04-21 02:02:02 +04:00
{ // move all the intermediate nodes into the new parent node
nsCOMPtr<nsIDOMNode>nextSibling;
while (intermediateNode.get() != aEndNode)
{
if (!intermediateNode)
result = NS_ERROR_NULL_POINTER;
if (NS_FAILED(result)) {
break;
}
// get the next sibling before moving the current child!!!
intermediateNode->GetNextSibling(getter_AddRefs(nextSibling));
result = nsEditor::DeleteNode(intermediateNode);
if (NS_SUCCEEDED(result)) {
1999-04-21 02:02:02 +04:00
result = nsEditor::InsertNode(intermediateNode, aNewParentNode, childIndex);
childIndex++;
}
intermediateNode = do_QueryInterface(nextSibling);
}
if (NS_SUCCEEDED(result))
1999-04-21 02:02:02 +04:00
{ // move the left half of the end node into the new parent node
result = nsEditor::DeleteNode(newRightNode);
if (NS_SUCCEEDED(result))
{
1999-04-21 02:02:02 +04:00
result = nsEditor::InsertNode(newRightNode, aNewParentNode, childIndex);
}
}
}
}
}
}
}
}
}
}
return result;
}
1999-04-21 02:02:02 +04:00
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
/* this wraps every selected text node in a new inline style node if needed
the text nodes are treated as being unique -- each needs it's own style node
if the style is not already present.
each action has immediate effect on the content tree and resolved style, so
doing outermost text nodes first removes the need for interior style nodes in some cases.
XXX: need to code test to see if new style node is needed
*/
NS_IMETHODIMP
nsTextEditor::SetTextPropertiesForNodeWithDifferentParents(nsIDOMRange *aRange,
nsIDOMNode *aStartNode,
PRInt32 aStartOffset,
nsIDOMNode *aEndNode,
PRInt32 aEndOffset,
nsIDOMNode *aParent,
nsIAtom *aPropName,
const nsString *aAttribute,
const nsString *aValue)
{
if (gNoisy) { printf("nsTextEditor::SetTextPropertiesForNodeWithDifferentParents\n"); }
nsresult result=NS_OK;
PRUint32 count;
if (!aRange || !aStartNode || !aEndNode || !aParent || !aPropName)
return NS_ERROR_NULL_POINTER;
// create a style node for the text in the start parent
nsCOMPtr<nsIDOMNode>parent;
// create new parent nodes for all the content between the start and end nodes
nsCOMPtr<nsIContentIterator>iter;
result = nsComponentManager::CreateInstance(kCContentIteratorCID, nsnull,
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
kIContentIteratorIID, getter_AddRefs(iter));
if ((NS_SUCCEEDED(result)) && iter)
{
nsCOMPtr<nsIContent>startContent;
startContent = do_QueryInterface(aStartNode);
nsCOMPtr<nsIContent>endContent;
endContent = do_QueryInterface(aEndNode);
if (startContent && endContent)
{
iter->Init(aRange);
nsCOMPtr<nsIContent> content;
iter->CurrentNode(getter_AddRefs(content));
nsAutoString tag;
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
aPropName->ToString(tag);
while (NS_COMFALSE == iter->IsDone())
{
if ((content.get() != startContent.get()) &&
(content.get() != endContent.get()))
{
nsCOMPtr<nsIDOMCharacterData>charNode;
charNode = do_QueryInterface(content);
if (charNode)
{
// only want to wrap the text node in a new style node if it doesn't already have that style
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
nsCOMPtr<nsIDOMNode>node;
node = do_QueryInterface(content);
PRBool textPropertySet;
nsCOMPtr<nsIDOMNode>resultNode;
IsTextPropertySetByContent(node, aPropName, aAttribute, aValue, textPropertySet, getter_AddRefs(resultNode));
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
if (PR_FALSE==textPropertySet)
{
charNode->GetParentNode(getter_AddRefs(parent));
if (!parent) {
return NS_ERROR_NULL_POINTER;
}
nsCOMPtr<nsIContent>parentContent;
parentContent = do_QueryInterface(parent);
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
PRInt32 offsetInParent;
parentContent->IndexOf(content, offsetInParent);
nsCOMPtr<nsIDOMNode>newStyleNode;
result = nsEditor::CreateNode(tag, parent, offsetInParent, getter_AddRefs(newStyleNode));
if (NS_SUCCEEDED(result) && newStyleNode)
{
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
nsCOMPtr<nsIDOMNode>contentNode;
contentNode = do_QueryInterface(content);
if (!contentNode) { return NS_ERROR_NULL_POINTER;}
result = GetLengthOfDOMNode(contentNode, count);
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
if (NS_SUCCEEDED(result)) {
result = SetTextPropertiesForNode(contentNode, newStyleNode, 0, count, aPropName, aAttribute, aValue);
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
}
}
}
}
}
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
// note we don't check the result, we just rely on iter->IsDone
iter->Next();
iter->CurrentNode(getter_AddRefs(content));
}
}
}
// handle endpoints
if (NS_SUCCEEDED(result))
{
// create a style node for the text in the start parent
result = aStartNode->GetParentNode(getter_AddRefs(parent));
if (NS_FAILED(result)) {
return result;
}
nsCOMPtr<nsIDOMCharacterData>nodeAsChar;
nodeAsChar = do_QueryInterface(aStartNode);
if (nodeAsChar)
{
nodeAsChar->GetLength(&count);
result = SetTextPropertiesForNode(aStartNode, parent, aStartOffset, count, aPropName, aAttribute, aValue);
}
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
if (NS_SUCCEEDED(result))
{
// create a style node for the text in the end parent
result = aEndNode->GetParentNode(getter_AddRefs(parent));
if (NS_FAILED(result)) {
return result;
}
nodeAsChar = do_QueryInterface(aEndNode);
if (nodeAsChar)
{
nodeAsChar->GetLength(&count);
result = SetTextPropertiesForNode(aEndNode, parent, 0, aEndOffset, aPropName, aAttribute, aValue);
}
}
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
}
return result;
}
NS_IMETHODIMP nsTextEditor::RemoveTextPropertiesForNode(nsIDOMNode *aNode,
nsIDOMNode *aParent,
PRInt32 aStartOffset,
PRInt32 aEndOffset,
nsIAtom *aPropName,
const nsString *aAttribute)
{
if (gNoisy) { printf("nsTextEditor::RemoveTextPropertyForNode\n"); }
nsresult result=NS_OK;
nsCOMPtr<nsIDOMCharacterData>nodeAsChar;
nodeAsChar = do_QueryInterface(aNode);
PRBool textPropertySet;
nsCOMPtr<nsIDOMNode>resultNode;
IsTextPropertySetByContent(aNode, aPropName, aAttribute, nsnull, textPropertySet, getter_AddRefs(resultNode));
if (PR_TRUE==textPropertySet)
{
nsCOMPtr<nsIDOMNode>parent; // initially set to first interior parent node to process
nsCOMPtr<nsIDOMNode>newMiddleNode; // this will be the middle node after any required splits
nsCOMPtr<nsIDOMNode>newLeftNode; // this will be the leftmost node,
// the node being split will be rightmost
PRUint32 count;
// if aNode is a text node, treat is specially
if (nodeAsChar)
{
nodeAsChar->GetLength(&count);
// split the node, and all parent nodes up to the style node
// then promote the selected content to the parent of the style node
if (0!=aStartOffset) {
if (gNoisy) { printf("* splitting text node %p at %d\n", aNode, aStartOffset);}
result = nsEditor::SplitNode(aNode, aStartOffset, getter_AddRefs(newLeftNode));
if (gNoisy) { printf("* split created left node %p\n", newLeftNode.get());}
if (gNoisy) {DebugDumpContent(); } // DEBUG
}
if (NS_SUCCEEDED(result))
{
if ((PRInt32)count!=aEndOffset) {
if (gNoisy) { printf("* splitting text node (right node) %p at %d\n", aNode, aEndOffset-aStartOffset);}
result = nsEditor::SplitNode(aNode, aEndOffset-aStartOffset, getter_AddRefs(newMiddleNode));
if (gNoisy) { printf("* split created middle node %p\n", newMiddleNode.get());}
if (gNoisy) {DebugDumpContent(); } // DEBUG
}
else {
if (gNoisy) { printf("* no need to split text node, middle to aNode\n");}
newMiddleNode = do_QueryInterface(aNode);
}
NS_ASSERTION(newMiddleNode, "no middle node created");
// now that the text node is split, split parent nodes until we get to the style node
parent = do_QueryInterface(aParent); // we know this has to succeed, no need to check
}
}
else {
newMiddleNode = do_QueryInterface(aNode);
parent = do_QueryInterface(aParent);
}
if (NS_SUCCEEDED(result) && newMiddleNode)
{
// split every ancestor until we find the node that is giving us the style we want to remove
// then split the style node and promote the selected content to the style node's parent
while (NS_SUCCEEDED(result) && parent)
{
if (gNoisy) { printf("* looking at parent %p\n", parent);}
// get the tag from parent and see if we're done
nsCOMPtr<nsIDOMNode>temp;
nsCOMPtr<nsIDOMElement>element;
element = do_QueryInterface(parent);
if (element)
{
nsAutoString tag;
result = element->GetTagName(tag);
if (gNoisy) { printf("* parent has tag %s\n", tag.ToNewCString()); } // XXX leak!
if (NS_SUCCEEDED(result))
{
1999-04-24 05:39:50 +04:00
if (PR_FALSE==tag.Equals(aPropName->GetUnicode()))
{
PRInt32 offsetInParent;
result = nsIEditorSupport::GetChildOffset(newMiddleNode, parent, offsetInParent);
if (NS_SUCCEEDED(result))
{
if (0!=offsetInParent) {
if (gNoisy) { printf("* splitting parent %p at offset %d\n", parent, offsetInParent);}
result = nsEditor::SplitNode(parent, offsetInParent, getter_AddRefs(newLeftNode));
if (gNoisy) { printf("* split created left node %p sibling of parent\n", newLeftNode.get());}
if (gNoisy) {DebugDumpContent(); } // DEBUG
}
if (NS_SUCCEEDED(result))
{
nsCOMPtr<nsIDOMNodeList>childNodes;
result = parent->GetChildNodes(getter_AddRefs(childNodes));
if (NS_SUCCEEDED(result) && childNodes)
{
childNodes->GetLength(&count);
NS_ASSERTION(count>0, "bad child count in newly split node");
if ((PRInt32)count!=1)
{
if (gNoisy) { printf("* splitting parent %p at offset %d\n", parent, 1);}
result = nsEditor::SplitNode(parent, 1, getter_AddRefs(newMiddleNode));
if (gNoisy) { printf("* split created middle node %p sibling of parent\n", newMiddleNode.get());}
if (gNoisy) {DebugDumpContent(); } // DEBUG
}
else {
if (gNoisy) { printf("* no need to split parent, newMiddleNode=parent\n");}
newMiddleNode = do_QueryInterface(parent);
}
NS_ASSERTION(newMiddleNode, "no middle node created");
parent->GetParentNode(getter_AddRefs(temp));
parent = do_QueryInterface(temp);
}
}
}
}
// else we've found the style tag (referred to by "parent")
// newMiddleNode is the node that is an ancestor to the selection
else
{
if (gNoisy) { printf("* this is the style node\n");}
PRInt32 offsetInParent;
result = nsIEditorSupport::GetChildOffset(newMiddleNode, parent, offsetInParent);
if (NS_SUCCEEDED(result))
{
nsCOMPtr<nsIDOMNodeList>childNodes;
result = parent->GetChildNodes(getter_AddRefs(childNodes));
if (NS_SUCCEEDED(result) && childNodes)
{
childNodes->GetLength(&count);
// if there are siblings to the right, split parent at offsetInParent+1
if ((PRInt32)count!=offsetInParent+1)
{
nsCOMPtr<nsIDOMNode>newRightNode;
nsCOMPtr<nsIDOMNode>temp;
if (gNoisy) { printf("* splitting parent %p at offset %d for right side\n", parent, offsetInParent+1);}
result = nsEditor::SplitNode(parent, offsetInParent+1, getter_AddRefs(temp));
if (NS_SUCCEEDED(result))
{
newRightNode = do_QueryInterface(parent);
parent = do_QueryInterface(temp);
if (gNoisy) { printf("* split created right node %p sibling of parent %p\n", newRightNode.get(), parent.get());}
if (gNoisy) {DebugDumpContent(); } // DEBUG
}
}
if (NS_SUCCEEDED(result) && 0!=offsetInParent) {
if (gNoisy) { printf("* splitting parent %p at offset %d for left side\n", parent, offsetInParent);}
result = nsEditor::SplitNode(parent, offsetInParent, getter_AddRefs(newLeftNode));
if (gNoisy) { printf("* split created left node %p sibling of parent %p\n", newLeftNode.get(), parent.get());}
if (gNoisy) {DebugDumpContent(); } // DEBUG
}
if (NS_SUCCEEDED(result))
{ // promote the selection to the grandparent
// first, determine the child's position in it's parent
PRInt32 childPositionInParent;
nsIEditorSupport::GetChildOffset(newMiddleNode, parent, childPositionInParent);
// compare childPositionInParent to the number of children in parent
PRUint32 count=0;
nsCOMPtr<nsIDOMNodeList>childNodes;
result = parent->GetChildNodes(getter_AddRefs(childNodes));
if (NS_SUCCEEDED(result) && childNodes) {
childNodes->GetLength(&count);
}
PRBool insertAfter = PR_FALSE;
// if they're equal, we'll insert newMiddleNode in grandParent after the parent
if ((PRInt32)count==childPositionInParent) {
insertAfter = PR_TRUE;
}
// now that we know where to put newMiddleNode, do it.
nsCOMPtr<nsIDOMNode>grandParent;
result = parent->GetParentNode(getter_AddRefs(grandParent));
if (NS_SUCCEEDED(result) && grandParent)
{
if (gNoisy) { printf("* deleting middle node %p\n", newMiddleNode.get());}
result = nsEditor::DeleteNode(newMiddleNode);
if (gNoisy) {DebugDumpContent(); } // DEBUG
if (NS_SUCCEEDED(result))
{
PRInt32 position;
result = nsIEditorSupport::GetChildOffset(parent, grandParent, position);
if (NS_SUCCEEDED(result))
{
if (PR_TRUE==insertAfter)
{
if (gNoisy) {printf("insertAfter=PR_TRUE, incr. position\n"); }
position++;
}
if (gNoisy) {
printf("* inserting node %p in grandparent %p at offset %d\n",
newMiddleNode.get(), grandParent.get(), position);
}
result = nsEditor::InsertNode(newMiddleNode, grandParent, position);
if (gNoisy) {DebugDumpContent(); } // DEBUG
if (NS_SUCCEEDED(result))
{
PRBool hasChildren=PR_TRUE;
parent->HasChildNodes(&hasChildren);
if (PR_FALSE==hasChildren) {
if (gNoisy) { printf("* deleting empty style node %p\n", parent.get());}
result = nsEditor::DeleteNode(parent);
if (gNoisy) {DebugDumpContent(); } // DEBUG
}
}
}
}
}
}
}
}
break;
}
}
}
}
}
}
return result;
}
/* this should only get called if the only intervening nodes are inline style nodes */
NS_IMETHODIMP
nsTextEditor::RemoveTextPropertiesForNodesWithSameParent(nsIDOMNode *aStartNode,
PRInt32 aStartOffset,
nsIDOMNode *aEndNode,
PRInt32 aEndOffset,
nsIDOMNode *aParent,
nsIAtom *aPropName,
const nsString *aAttribute)
{
if (gNoisy) { printf("nsTextEditor::RemoveTextPropertiesForNodesWithSameParent\n"); }
nsresult result=NS_OK;
PRInt32 startOffset = aStartOffset;
PRInt32 endOffset;
nsCOMPtr<nsIDOMCharacterData>nodeAsChar;
nsCOMPtr<nsIDOMNode>parentNode = do_QueryInterface(aParent);
// remove aPropName from all intermediate nodes
nsCOMPtr<nsIDOMNode>siblingNode;
nsCOMPtr<nsIDOMNode>nextSiblingNode; // temp to hold the next node in the list
result = aStartNode->GetNextSibling(getter_AddRefs(siblingNode));
while (siblingNode && NS_SUCCEEDED(result))
{
// get next sibling right away, before we move siblingNode!
siblingNode->GetNextSibling(getter_AddRefs(nextSiblingNode));
if (aEndNode==siblingNode.get()) { // found the end node, handle that below
break;
}
else
{ // found a sibling node between aStartNode and aEndNode, remove the style node
PRUint32 childCount=0;
nodeAsChar = do_QueryInterface(siblingNode);
if (nodeAsChar) {
nodeAsChar->GetLength(&childCount);
}
else
{
nsCOMPtr<nsIDOMNodeList>grandChildNodes;
result = siblingNode->GetChildNodes(getter_AddRefs(grandChildNodes));
if (NS_SUCCEEDED(result) && grandChildNodes) {
grandChildNodes->GetLength(&childCount);
}
if (0==childCount)
{ // node has no children
// XXX: for now, I think that's ok. just pass in 0
}
}
if (NS_SUCCEEDED(result)) {
siblingNode->GetParentNode(getter_AddRefs(parentNode));
result = RemoveTextPropertiesForNode(siblingNode, parentNode, 0, childCount, aPropName, aAttribute);
}
}
siblingNode = do_QueryInterface(nextSiblingNode);
}
if (NS_SUCCEEDED(result))
{
// remove aPropName from aStartNode
nsCOMPtr<nsIDOMCharacterData>nodeAsChar;
nodeAsChar = do_QueryInterface(aStartNode);
if (nodeAsChar) {
nodeAsChar->GetLength((PRUint32 *)&endOffset);
}
else
{
if (gNoisy) { printf("not yet supported\n");}
return NS_ERROR_NOT_IMPLEMENTED;
}
result = aStartNode->GetParentNode(getter_AddRefs(parentNode));
if (NS_SUCCEEDED(result)) {
result = RemoveTextPropertiesForNode(aStartNode, parentNode, startOffset, endOffset, aPropName, aAttribute);
}
}
if (NS_SUCCEEDED(result))
{
// remove aPropName from the end node
startOffset = 0;
endOffset = aEndOffset;
result = aEndNode->GetParentNode(getter_AddRefs(parentNode));
if (NS_SUCCEEDED(result)) {
result = RemoveTextPropertiesForNode(aEndNode, parentNode, startOffset, endOffset, aPropName, aAttribute);
}
}
return result;
}
NS_IMETHODIMP
nsTextEditor::RemoveTextPropertiesForNodeWithDifferentParents(nsIDOMNode *aStartNode,
PRInt32 aStartOffset,
nsIDOMNode *aEndNode,
PRInt32 aEndOffset,
nsIDOMNode *aParent,
nsIAtom *aPropName,
const nsString *aAttribute)
{
if (gNoisy) { printf("nsTextEditor::RemoveTextPropertiesForNodeWithDifferentParents\n"); }
nsresult result=NS_OK;
if (!aStartNode || !aEndNode || !aParent || !aPropName)
return NS_ERROR_NULL_POINTER;
PRInt32 rangeStartOffset = aStartOffset; // used to construct a range for the nodes between
PRInt32 rangeEndOffset = aEndOffset; // aStartNode and aEndNode after we've processed those endpoints
// delete the style node for the text in the start parent
PRBool skippedStartNode = PR_FALSE;
nsCOMPtr<nsIDOMCharacterData>nodeAsChar;
PRUint32 count;
nsCOMPtr<nsIDOMNode>parent;
result = aStartNode->GetParentNode(getter_AddRefs(parent));
if (NS_FAILED(result)) {
return result;
}
nodeAsChar = do_QueryInterface(aStartNode);
if (!nodeAsChar) { return NS_ERROR_FAILURE; }
nodeAsChar->GetLength(&count);
if ((PRUint32)aStartOffset!=count) { // only do this if at least one child is selected
result = RemoveTextPropertiesForNode(aStartNode, parent, aStartOffset, count, aPropName, aAttribute);
if (0!=aStartOffset) {
rangeStartOffset = 0; // we split aStartNode at aStartOffset and it is the right node now
}
}
else
{
skippedStartNode = PR_TRUE;
if (gNoisy) { printf("skipping start node because aStartOffset==count\n"); }
}
// delete the style node for the text in the end parent
if (NS_SUCCEEDED(result))
{
result = aEndNode->GetParentNode(getter_AddRefs(parent));
if (NS_SUCCEEDED(result))
{
nodeAsChar = do_QueryInterface(aEndNode);
if (!nodeAsChar) { return NS_ERROR_FAILURE; }
nodeAsChar->GetLength(&count);
if (aEndOffset!=0) { // only do this if at least one child is selected
result = RemoveTextPropertiesForNode(aEndNode, parent, 0, aEndOffset, aPropName, aAttribute);
if (0!=aEndOffset) {
rangeEndOffset = 0; // we split aEndNode at aEndOffset and it is the right node now
}
}
else { if (gNoisy) { printf("skipping end node because aEndOffset==0\n"); } }
}
}
// remove aPropName style nodes for all the content between the start and end nodes
if (NS_SUCCEEDED(result))
{
// build our own range now, because the endpoints may have shifted during shipping
nsCOMPtr<nsIDOMRange> range;
result = nsComponentManager::CreateInstance(kCRangeCID,
nsnull,
kIDOMRangeIID,
getter_AddRefs(range));
if (NS_FAILED(result)) { return result; }
if (!range) { return NS_ERROR_NULL_POINTER; }
// compute the start node
nsCOMPtr<nsIDOMNode>startNode = do_QueryInterface(aStartNode);
if (PR_TRUE==skippedStartNode) {
nsEditor::GetNextNode(aStartNode, getter_AddRefs(startNode));
}
range->SetStart(startNode, rangeStartOffset);
range->SetEnd(aEndNode, rangeEndOffset);
if (gNoisy)
{
printf("created range [(%p,%d), (%p,%d)]\n",
aStartNode, rangeStartOffset,
aEndNode, rangeEndOffset);
}
nsVoidArray nodeList;
nsCOMPtr<nsIContentIterator>iter;
result = nsComponentManager::CreateInstance(kCContentIteratorCID, nsnull,
kIContentIteratorIID, getter_AddRefs(iter));
if ((NS_SUCCEEDED(result)) && iter)
{
nsCOMPtr<nsIContent>startContent;
startContent = do_QueryInterface(aStartNode);
nsCOMPtr<nsIContent>endContent;
endContent = do_QueryInterface(aEndNode);
if (startContent && endContent)
{
iter->Init(range);
nsCOMPtr<nsIContent> content;
iter->CurrentNode(getter_AddRefs(content));
nsAutoString propName; // the property we are removing
aPropName->ToString(propName);
while (NS_COMFALSE == iter->IsDone())
{
if ((content.get() != startContent.get()) &&
(content.get() != endContent.get()))
{
nsCOMPtr<nsIDOMElement>element;
element = do_QueryInterface(content);
if (element)
{
nsString tag;
element->GetTagName(tag);
if (propName.Equals(tag))
{
if (-1==nodeList.IndexOf(content.get())) {
nodeList.AppendElement((void *)(content.get()));
}
}
}
}
// note we don't check the result, we just rely on iter->IsDone
iter->Next();
iter->CurrentNode(getter_AddRefs(content));
}
}
}
// now delete all the style nodes we found
if (NS_SUCCEEDED(result))
{
nsIContent *contentPtr;
contentPtr = (nsIContent*)(nodeList.ElementAt(0));
while (NS_SUCCEEDED(result) && contentPtr)
{
nsCOMPtr<nsIDOMNode>styleNode;
styleNode = do_QueryInterface(contentPtr);
// promote the children of styleNode
nsCOMPtr<nsIDOMNode>parentNode;
result = styleNode->GetParentNode(getter_AddRefs(parentNode));
if (NS_SUCCEEDED(result) && parentNode)
{
PRInt32 position;
result = nsIEditorSupport::GetChildOffset(styleNode, parentNode, position);
if (NS_SUCCEEDED(result))
{
nsCOMPtr<nsIDOMNode>previousSiblingNode;
nsCOMPtr<nsIDOMNode>childNode;
result = styleNode->GetLastChild(getter_AddRefs(childNode));
while (NS_SUCCEEDED(result) && childNode)
{
childNode->GetPreviousSibling(getter_AddRefs(previousSiblingNode));
// explicitly delete of childNode from styleNode
// can't just rely on DOM semantics of InsertNode doing the delete implicitly, doesn't undo!
result = nsEditor::DeleteNode(childNode);
if (NS_SUCCEEDED(result))
{
result = nsEditor::InsertNode(childNode, parentNode, position);
if (gNoisy)
{
printf("deleted next sibling node %p\n", childNode.get());
DebugDumpContent(); // DEBUG
}
}
childNode = do_QueryInterface(previousSiblingNode);
} // end while loop
// delete styleNode
result = nsEditor::DeleteNode(styleNode);
if (gNoisy)
{
printf("deleted style node %p\n", styleNode.get());
DebugDumpContent(); // DEBUG
}
}
}
// get next content ptr
nodeList.RemoveElementAt(0);
contentPtr = (nsIContent*)(nodeList.ElementAt(0));
}
}
}
return result;
}
TypeInState * nsTextEditor::GetTypeInState()
{
if (mTypeInState) {
NS_ADDREF(mTypeInState);
}
return mTypeInState;
}
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
NS_IMETHODIMP
nsTextEditor::SetTypeInStateForProperty(TypeInState &aTypeInState,
nsIAtom *aPropName,
const nsString *aAttribute,
const nsString *aValue)
{
if (!aPropName) {
return NS_ERROR_NULL_POINTER;
}
PRUint32 propEnum;
aTypeInState.GetEnumForName(aPropName, propEnum);
if (nsIEditProperty::b==aPropName || nsIEditProperty::i==aPropName || nsIEditProperty::u==aPropName)
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
{
if (PR_TRUE==aTypeInState.IsSet(propEnum))
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
{ // toggle currently set boldness
aTypeInState.UnSet(propEnum);
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
}
else
{ // get the current style and set boldness to the opposite of the current state
PRBool any = PR_FALSE;
PRBool all = PR_FALSE;
PRBool first = PR_FALSE;
GetTextProperty(aPropName, aAttribute, nsnull, first, any, all); // operates on current selection
aTypeInState.SetProp(propEnum, !any);
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 21:58:07 +04:00
}
}
else if (nsIEditProperty::font==aPropName)
{
if (!aAttribute) { return NS_ERROR_NULL_POINTER; }
nsIAtom *attribute = NS_NewAtom(*aAttribute);
if (!attribute) { return NS_ERROR_NULL_POINTER; }
PRUint32 attrEnum;
aTypeInState.GetEnumForName(attribute, attrEnum);
if (nsIEditProperty::color==attribute || nsIEditProperty::face==attribute || nsIEditProperty::size==attribute)
{
if (PR_TRUE==aTypeInState.IsSet(attrEnum))
{
if (nsnull==aValue) {
aTypeInState.UnSet(attrEnum);
}
else { // we're just changing the value of color
aTypeInState.SetPropValue(attrEnum, *aValue);
}
}
else
{ // get the current style and set font color if it's needed
if (!aValue) { return NS_ERROR_NULL_POINTER; }
PRBool any = PR_FALSE;
PRBool all = PR_FALSE;
PRBool first = PR_FALSE;
GetTextProperty(aPropName, aAttribute, aValue, first, any, all); // operates on current selection
if (PR_FALSE==all) {
aTypeInState.SetPropValue(attrEnum, *aValue);
}
}
}
else { return NS_ERROR_FAILURE; }
}
else { return NS_ERROR_FAILURE; }
return NS_OK;
}
// This file should be rearranged to put all methods that simply call nsEditor together
NS_IMETHODIMP
nsTextEditor::CopyAttributes(nsIDOMNode *aDestNode, nsIDOMNode *aSourceNode)
{
return nsEditor::CopyAttributes(aDestNode, aSourceNode);
}