gecko-dev/image/imgFrame.cpp

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* vim: set ts=2 et sw=2 tw=80: */
/* This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/. */

#include "imgFrame.h"
#include "ImageRegion.h"
#include "ShutdownTracker.h"
#include "SurfaceCache.h"

#include "prenv.h"

#include "gfx2DGlue.h"
#include "gfxPlatform.h"
#include "gfxPrefs.h"
#include "gfxUtils.h"

#include "GeckoProfiler.h"
#include "MainThreadUtils.h"
#include "mozilla/CheckedInt.h"
#include "mozilla/gfx/gfxVars.h"
#include "mozilla/gfx/Tools.h"
#include "mozilla/gfx/SourceSurfaceRawData.h"
#include "mozilla/image/RecyclingSourceSurface.h"
#include "mozilla/layers/SourceSurfaceSharedData.h"
#include "mozilla/layers/SourceSurfaceVolatileData.h"
#include "mozilla/Likely.h"
#include "mozilla/MemoryReporting.h"
#include "nsMargin.h"
#include "nsRefreshDriver.h"
#include "nsThreadUtils.h"

namespace mozilla {

using namespace gfx;

namespace image {

static void ScopedMapRelease(void* aMap) {
  delete static_cast<DataSourceSurface::ScopedMap*>(aMap);
}

static int32_t VolatileSurfaceStride(const IntSize& size,
                                     SurfaceFormat format) {
  // Stride must be a multiple of four or cairo will complain.
  return (size.width * BytesPerPixel(format) + 0x3) & ~0x3;
}

static already_AddRefed<DataSourceSurface> CreateLockedSurface(
    DataSourceSurface* aSurface, const IntSize& size, SurfaceFormat format) {
  // Shared memory is never released until the surface itself is released
  if (aSurface->GetType() == SurfaceType::DATA_SHARED) {
    RefPtr<DataSourceSurface> surf(aSurface);
    return surf.forget();
  }

  DataSourceSurface::ScopedMap* smap =
      new DataSourceSurface::ScopedMap(aSurface, DataSourceSurface::READ_WRITE);
  if (smap->IsMapped()) {
    // The ScopedMap is held by this DataSourceSurface.
    RefPtr<DataSourceSurface> surf = Factory::CreateWrappingDataSourceSurface(
        smap->GetData(), aSurface->Stride(), size, format, &ScopedMapRelease,
        static_cast<void*>(smap));
    if (surf) {
      return surf.forget();
    }
  }

  delete smap;
  return nullptr;
}

static bool ShouldUseHeap(const IntSize& aSize, int32_t aStride,
                          bool aIsAnimated) {
  // On some platforms (i.e. Android), a volatile buffer actually keeps a file
  // handle active. We would like to avoid too many since we could easily
  // exhaust the pool. However, other platforms we do not have the file handle
  // problem, and additionally we may avoid a superfluous memset since the
  // volatile memory starts out as zero-filled. Hence the knobs below.

  // For as long as an animated image is retained, its frames will never be
  // released to let the OS purge volatile buffers.
  if (aIsAnimated && gfxPrefs::ImageMemAnimatedUseHeap()) {
    return true;
  }

  // Lets us avoid too many small images consuming all of the handles. The
  // actual allocation checks for overflow.
  int32_t bufferSize = (aStride * aSize.width) / 1024;
  if (bufferSize < gfxPrefs::ImageMemVolatileMinThresholdKB()) {
    return true;
  }

  return false;
}

static already_AddRefed<DataSourceSurface> AllocateBufferForImage(
    const IntSize& size, SurfaceFormat format, bool aIsAnimated = false,
    bool aIsFullFrame = true) {
  int32_t stride = VolatileSurfaceStride(size, format);

  if (gfxVars::GetUseWebRenderOrDefault() && gfxPrefs::ImageMemShared() &&
      aIsFullFrame) {
    RefPtr<SourceSurfaceSharedData> newSurf = new SourceSurfaceSharedData();
    if (newSurf->Init(size, stride, format)) {
      return newSurf.forget();
    }
  } else if (ShouldUseHeap(size, stride, aIsAnimated)) {
    RefPtr<SourceSurfaceAlignedRawData> newSurf =
        new SourceSurfaceAlignedRawData();
    if (newSurf->Init(size, format, false, 0, stride)) {
      return newSurf.forget();
    }
  } else {
    RefPtr<SourceSurfaceVolatileData> newSurf = new SourceSurfaceVolatileData();
    if (newSurf->Init(size, stride, format)) {
      return newSurf.forget();
    }
  }
  return nullptr;
}

static bool ClearSurface(DataSourceSurface* aSurface, const IntSize& aSize,
                         SurfaceFormat aFormat) {
  int32_t stride = aSurface->Stride();
  uint8_t* data = aSurface->GetData();
  MOZ_ASSERT(data);

  if (aFormat == SurfaceFormat::B8G8R8X8) {
    // Skia doesn't support RGBX surfaces, so ensure the alpha value is set
    // to opaque white. While it would be nice to only do this for Skia,
    // imgFrame can run off main thread and past shutdown where
    // we might not have gfxPlatform, so just memset everytime instead.
    memset(data, 0xFF, stride * aSize.height);
  } else if (aSurface->OnHeap()) {
    // We only need to memset it if the buffer was allocated on the heap.
    // Otherwise, it's allocated via mmap and refers to a zeroed page and will
    // be COW once it's written to.
    memset(data, 0, stride * aSize.height);
  }

  return true;
}

static bool AllowedImageAndFrameDimensions(const nsIntSize& aImageSize,
                                           const nsIntRect& aFrameRect) {
  if (!SurfaceCache::IsLegalSize(aImageSize)) {
    return false;
  }
  if (!SurfaceCache::IsLegalSize(aFrameRect.Size())) {
    return false;
  }
  nsIntRect imageRect(0, 0, aImageSize.width, aImageSize.height);
  if (!imageRect.Contains(aFrameRect)) {
    NS_WARNING("Animated image frame does not fit inside bounds of image");
  }
  return true;
}

imgFrame::imgFrame()
    : mMonitor("imgFrame"),
      mDecoded(0, 0, 0, 0),
      mLockCount(0),
      mRecycleLockCount(0),
      mAborted(false),
      mFinished(false),
      mOptimizable(false),
      mShouldRecycle(false),
      mTimeout(FrameTimeout::FromRawMilliseconds(100)),
      mDisposalMethod(DisposalMethod::NOT_SPECIFIED),
      mBlendMethod(BlendMethod::OVER),
      mFormat(SurfaceFormat::UNKNOWN),
      mPalettedImageData(nullptr),
      mPaletteDepth(0),
      mNonPremult(false),
      mIsFullFrame(false),
      mCompositingFailed(false) {}

imgFrame::~imgFrame() {
#ifdef DEBUG
  MonitorAutoLock lock(mMonitor);
  MOZ_ASSERT(mAborted || AreAllPixelsWritten());
  MOZ_ASSERT(mAborted || mFinished);
#endif

  free(mPalettedImageData);
  mPalettedImageData = nullptr;
}

nsresult imgFrame::InitForDecoder(const nsIntSize& aImageSize,
                                  const nsIntRect& aRect, SurfaceFormat aFormat,
                                  uint8_t aPaletteDepth, bool aNonPremult,
                                  const Maybe<AnimationParams>& aAnimParams,
                                  bool aIsFullFrame, bool aShouldRecycle) {
  // Assert for properties that should be verified by decoders,
  // warn for properties related to bad content.
  if (!AllowedImageAndFrameDimensions(aImageSize, aRect)) {
    NS_WARNING("Should have legal image size");
    mAborted = true;
    return NS_ERROR_FAILURE;
  }

  mImageSize = aImageSize;
  mFrameRect = aRect;

  // May be updated shortly after InitForDecoder by BlendAnimationFilter
  // because it needs to take into consideration the previous frames to
  // properly calculate. We start with the whole frame as dirty.
  mDirtyRect = aRect;

  if (aAnimParams) {
    mBlendRect = aAnimParams->mBlendRect;
    mTimeout = aAnimParams->mTimeout;
    mBlendMethod = aAnimParams->mBlendMethod;
    mDisposalMethod = aAnimParams->mDisposalMethod;
    mIsFullFrame = aAnimParams->mFrameNum == 0 || aIsFullFrame;
  } else {
    mBlendRect = aRect;
    mIsFullFrame = true;
  }

  // We only allow a non-trivial frame rect (i.e., a frame rect that doesn't
  // cover the entire image) for paletted animation frames. We never draw those
  // frames directly; we just use FrameAnimator to composite them and produce a
  // BGRA surface that we actually draw. We enforce this here to make sure that
  // imgFrame::Draw(), which is responsible for drawing all other kinds of
  // frames, never has to deal with a non-trivial frame rect.
  if (aPaletteDepth == 0 &&
      !mFrameRect.IsEqualEdges(IntRect(IntPoint(), mImageSize))) {
    MOZ_ASSERT_UNREACHABLE(
        "Creating a non-paletted imgFrame with a "
        "non-trivial frame rect");
    return NS_ERROR_FAILURE;
  }

  if (aShouldRecycle) {
    // If we are recycling then we should always use BGRA for the underlying
    // surface because if we use BGRX, the next frame composited into the
    // surface could be BGRA and cause rendering problems.
    MOZ_ASSERT(mIsFullFrame);
    MOZ_ASSERT(aPaletteDepth == 0);
    MOZ_ASSERT(aAnimParams);
    mFormat = SurfaceFormat::B8G8R8A8;
  } else {
    mFormat = aFormat;
  }

  mPaletteDepth = aPaletteDepth;
  mNonPremult = aNonPremult;
  mShouldRecycle = aShouldRecycle;

  if (aPaletteDepth != 0) {
    // We're creating for a paletted image.
    if (aPaletteDepth > 8) {
      NS_WARNING("Should have legal palette depth");
      NS_ERROR("This Depth is not supported");
      mAborted = true;
      return NS_ERROR_FAILURE;
    }

    // Use the fallible allocator here. Paletted images always use 1 byte per
    // pixel, so calculating the amount of memory we need is straightforward.
    size_t dataSize = PaletteDataLength() + mFrameRect.Area();
    mPalettedImageData =
        static_cast<uint8_t*>(calloc(dataSize, sizeof(uint8_t)));
    if (!mPalettedImageData) {
      NS_WARNING("Call to calloc for paletted image data should succeed");
    }
    NS_ENSURE_TRUE(mPalettedImageData, NS_ERROR_OUT_OF_MEMORY);
  } else {
    MOZ_ASSERT(!mLockedSurface, "Called imgFrame::InitForDecoder() twice?");

    bool postFirstFrame = aAnimParams && aAnimParams->mFrameNum > 0;
    mRawSurface = AllocateBufferForImage(mFrameRect.Size(), mFormat,
                                         postFirstFrame, mIsFullFrame);
    if (!mRawSurface) {
      mAborted = true;
      return NS_ERROR_OUT_OF_MEMORY;
    }

    mLockedSurface =
        CreateLockedSurface(mRawSurface, mFrameRect.Size(), mFormat);
    if (!mLockedSurface) {
      NS_WARNING("Failed to create LockedSurface");
      mAborted = true;
      return NS_ERROR_OUT_OF_MEMORY;
    }

    if (!ClearSurface(mRawSurface, mFrameRect.Size(), mFormat)) {
      NS_WARNING("Could not clear allocated buffer");
      mAborted = true;
      return NS_ERROR_OUT_OF_MEMORY;
    }
  }

  return NS_OK;
}

nsresult imgFrame::InitForDecoderRecycle(const AnimationParams& aAnimParams) {
  // We want to recycle this frame, but there is no guarantee that consumers are
  // done with it in a timely manner. Let's ensure they are done with it first.
  MonitorAutoLock lock(mMonitor);

  MOZ_ASSERT(mIsFullFrame);
  MOZ_ASSERT(mLockCount > 0);
  MOZ_ASSERT(mLockedSurface);

  if (!mShouldRecycle) {
    // This frame either was never marked as recyclable, or the flag was cleared
    // for a caller which does not support recycling.
    return NS_ERROR_NOT_AVAILABLE;
  }

  if (mRecycleLockCount > 0) {
    if (NS_IsMainThread()) {
      // We should never be both decoding and recycling on the main thread. Sync
      // decoding can only be used to produce the first set of frames. Those
      // either never use recycling because advancing was blocked (main thread
      // is busy) or we were auto-advancing (to seek to a frame) and the frames
      // were never accessed (and thus cannot have recycle locks).
      MOZ_ASSERT_UNREACHABLE("Recycling/decoding on the main thread?");
      return NS_ERROR_NOT_AVAILABLE;
    }

    // We don't want to wait forever to reclaim the frame because we have no
    // idea why it is still held. It is possibly due to OMTP. Since we are off
    // the main thread, and we generally have frames already buffered for the
    // animation, we can afford to wait a short period of time to hopefully
    // complete the transaction and reclaim the buffer.
    //
    // We choose to wait for, at most, the refresh driver interval, so that we
    // won't skip more than one frame. If the frame is still in use due to
    // outstanding transactions, we are already skipping frames. If the frame
    // is still in use for some other purpose, it won't be returned to the pool
    // and its owner can hold onto it forever without additional impact here.
    TimeDuration timeout =
        TimeDuration::FromMilliseconds(nsRefreshDriver::DefaultInterval());
    while (true) {
      TimeStamp start = TimeStamp::Now();
      mMonitor.Wait(timeout);
      if (mRecycleLockCount == 0) {
        break;
      }

      TimeDuration delta = TimeStamp::Now() - start;
      if (delta >= timeout) {
        // We couldn't secure the frame for recycling. It will allocate a new
        // frame instead.
        return NS_ERROR_NOT_AVAILABLE;
      }

      timeout -= delta;
    }
  }

  mBlendRect = aAnimParams.mBlendRect;
  mTimeout = aAnimParams.mTimeout;
  mBlendMethod = aAnimParams.mBlendMethod;
  mDisposalMethod = aAnimParams.mDisposalMethod;
  mDirtyRect = mFrameRect;

  return NS_OK;
}

nsresult imgFrame::InitWithDrawable(
    gfxDrawable* aDrawable, const nsIntSize& aSize, const SurfaceFormat aFormat,
    SamplingFilter aSamplingFilter, uint32_t aImageFlags,
    gfx::BackendType aBackend, DrawTarget* aTargetDT) {
  // Assert for properties that should be verified by decoders,
  // warn for properties related to bad content.
  if (!SurfaceCache::IsLegalSize(aSize)) {
    NS_WARNING("Should have legal image size");
    mAborted = true;
    return NS_ERROR_FAILURE;
  }

  mImageSize = aSize;
  mFrameRect = IntRect(IntPoint(0, 0), aSize);

  mFormat = aFormat;
  mPaletteDepth = 0;

  RefPtr<DrawTarget> target;

  bool canUseDataSurface = Factory::DoesBackendSupportDataDrawtarget(aBackend);
  if (canUseDataSurface) {
    // It's safe to use data surfaces for content on this platform, so we can
    // get away with using volatile buffers.
    MOZ_ASSERT(!mLockedSurface, "Called imgFrame::InitWithDrawable() twice?");

    mRawSurface = AllocateBufferForImage(mFrameRect.Size(), mFormat);
    if (!mRawSurface) {
      mAborted = true;
      return NS_ERROR_OUT_OF_MEMORY;
    }

    mLockedSurface =
        CreateLockedSurface(mRawSurface, mFrameRect.Size(), mFormat);
    if (!mLockedSurface) {
      NS_WARNING("Failed to create LockedSurface");
      mAborted = true;
      return NS_ERROR_OUT_OF_MEMORY;
    }

    if (!ClearSurface(mRawSurface, mFrameRect.Size(), mFormat)) {
      NS_WARNING("Could not clear allocated buffer");
      mAborted = true;
      return NS_ERROR_OUT_OF_MEMORY;
    }

    target = gfxPlatform::CreateDrawTargetForData(
        mLockedSurface->GetData(), mFrameRect.Size(), mLockedSurface->Stride(),
        mFormat);
  } else {
    // We can't use data surfaces for content, so we'll create an offscreen
    // surface instead.  This means if someone later calls RawAccessRef(), we
    // may have to do an expensive readback, but we warned callers about that in
    // the documentation for this method.
    MOZ_ASSERT(!mOptSurface, "Called imgFrame::InitWithDrawable() twice?");

    if (aTargetDT && !gfxVars::UseWebRender()) {
      target = aTargetDT->CreateSimilarDrawTarget(mFrameRect.Size(), mFormat);
    } else {
      if (gfxPlatform::GetPlatform()->SupportsAzureContentForType(aBackend)) {
        target = gfxPlatform::GetPlatform()->CreateDrawTargetForBackend(
            aBackend, mFrameRect.Size(), mFormat);
      } else {
        target = gfxPlatform::GetPlatform()->CreateOffscreenContentDrawTarget(
            mFrameRect.Size(), mFormat);
      }
    }
  }

  if (!target || !target->IsValid()) {
    mAborted = true;
    return NS_ERROR_OUT_OF_MEMORY;
  }

  // Draw using the drawable the caller provided.
  RefPtr<gfxContext> ctx = gfxContext::CreateOrNull(target);
  MOZ_ASSERT(ctx);  // Already checked the draw target above.
  gfxUtils::DrawPixelSnapped(ctx, aDrawable, SizeDouble(mFrameRect.Size()),
                             ImageRegion::Create(ThebesRect(mFrameRect)),
                             mFormat, aSamplingFilter, aImageFlags);

  if (canUseDataSurface && !mLockedSurface) {
    NS_WARNING("Failed to create VolatileDataSourceSurface");
    mAborted = true;
    return NS_ERROR_OUT_OF_MEMORY;
  }

  if (!canUseDataSurface) {
    // We used an offscreen surface, which is an "optimized" surface from
    // imgFrame's perspective.
    mOptSurface = target->Snapshot();
  } else {
    FinalizeSurface();
  }

  // If we reach this point, we should regard ourselves as complete.
  mDecoded = GetRect();
  mFinished = true;

#ifdef DEBUG
  MonitorAutoLock lock(mMonitor);
  MOZ_ASSERT(AreAllPixelsWritten());
#endif

  return NS_OK;
}

nsresult imgFrame::Optimize(DrawTarget* aTarget) {
  MOZ_ASSERT(NS_IsMainThread());
  mMonitor.AssertCurrentThreadOwns();

  if (mLockCount > 0 || !mOptimizable) {
    // Don't optimize right now.
    return NS_OK;
  }

  // Check whether image optimization is disabled -- not thread safe!
  static bool gDisableOptimize = false;
  static bool hasCheckedOptimize = false;
  if (!hasCheckedOptimize) {
    if (PR_GetEnv("MOZ_DISABLE_IMAGE_OPTIMIZE")) {
      gDisableOptimize = true;
    }
    hasCheckedOptimize = true;
  }

  // Don't optimize during shutdown because gfxPlatform may not be available.
  if (ShutdownTracker::ShutdownHasStarted()) {
    return NS_OK;
  }

  if (gDisableOptimize) {
    return NS_OK;
  }

  if (mPalettedImageData || mOptSurface) {
    return NS_OK;
  }

  // XXX(seth): It's currently unclear if there's any reason why we can't
  // optimize non-premult surfaces. We should look into removing this.
  if (mNonPremult) {
    return NS_OK;
  }
  if (!gfxVars::UseWebRender()) {
    mOptSurface = aTarget->OptimizeSourceSurface(mLockedSurface);
  } else {
    mOptSurface = gfxPlatform::GetPlatform()
                      ->ScreenReferenceDrawTarget()
                      ->OptimizeSourceSurface(mLockedSurface);
  }
  if (mOptSurface == mLockedSurface) {
    mOptSurface = nullptr;
  }

  if (mOptSurface) {
    // There's no reason to keep our original surface around if we have an
    // optimized surface. Release our reference to it. This will leave
    // |mLockedSurface| as the only thing keeping it alive, so it'll get freed
    // below.
    mRawSurface = nullptr;
  }

  // Release all strong references to the surface's memory. If the underlying
  // surface is volatile, this will allow the operating system to free the
  // memory if it needs to.
  mLockedSurface = nullptr;
  mOptimizable = false;

  return NS_OK;
}

DrawableFrameRef imgFrame::DrawableRef() { return DrawableFrameRef(this); }

RawAccessFrameRef imgFrame::RawAccessRef(bool aOnlyFinished /*= false*/) {
  return RawAccessFrameRef(this, aOnlyFinished);
}

void imgFrame::SetRawAccessOnly() {
  AssertImageDataLocked();

  // Lock our data and throw away the key.
  LockImageData(false);
}

imgFrame::SurfaceWithFormat imgFrame::SurfaceForDrawing(
    bool aDoPartialDecode, bool aDoTile, ImageRegion& aRegion,
    SourceSurface* aSurface) {
  MOZ_ASSERT(NS_IsMainThread());
  mMonitor.AssertCurrentThreadOwns();

  if (!aDoPartialDecode) {
    return SurfaceWithFormat(new gfxSurfaceDrawable(aSurface, mImageSize),
                             mFormat);
  }

  gfxRect available =
      gfxRect(mDecoded.X(), mDecoded.Y(), mDecoded.Width(), mDecoded.Height());

  if (aDoTile) {
    // Create a temporary surface.
    // Give this surface an alpha channel because there are
    // transparent pixels in the padding or undecoded area
    RefPtr<DrawTarget> target =
        gfxPlatform::GetPlatform()->CreateOffscreenContentDrawTarget(
            mImageSize, SurfaceFormat::B8G8R8A8);
    if (!target) {
      return SurfaceWithFormat();
    }

    SurfacePattern pattern(aSurface, aRegion.GetExtendMode(),
                           Matrix::Translation(mDecoded.X(), mDecoded.Y()));
    target->FillRect(ToRect(aRegion.Intersect(available).Rect()), pattern);

    RefPtr<SourceSurface> newsurf = target->Snapshot();
    return SurfaceWithFormat(new gfxSurfaceDrawable(newsurf, mImageSize),
                             target->GetFormat());
  }

  // Not tiling, and we have a surface, so we can account for
  // a partial decode just by twiddling parameters.
  aRegion = aRegion.Intersect(available);
  IntSize availableSize(mDecoded.Width(), mDecoded.Height());

  return SurfaceWithFormat(new gfxSurfaceDrawable(aSurface, availableSize),
                           mFormat);
}

bool imgFrame::Draw(gfxContext* aContext, const ImageRegion& aRegion,
                    SamplingFilter aSamplingFilter, uint32_t aImageFlags,
                    float aOpacity) {
  AUTO_PROFILER_LABEL("imgFrame::Draw", GRAPHICS);

  MOZ_ASSERT(NS_IsMainThread());
  NS_ASSERTION(!aRegion.Rect().IsEmpty(), "Drawing empty region!");
  NS_ASSERTION(!aRegion.IsRestricted() ||
                   !aRegion.Rect().Intersect(aRegion.Restriction()).IsEmpty(),
               "We must be allowed to sample *some* source pixels!");
  MOZ_ASSERT(mFrameRect.IsEqualEdges(IntRect(IntPoint(), mImageSize)),
             "Directly drawing an image with a non-trivial frame rect!");

  if (mPalettedImageData) {
    MOZ_ASSERT_UNREACHABLE("Directly drawing a paletted image!");
    return false;
  }

  // Perform the draw and freeing of the surface outside the lock. We want to
  // avoid contention with the decoder if we can. The surface may also attempt
  // to relock the monitor if it is freed (e.g. RecyclingSourceSurface).
  RefPtr<SourceSurface> surf;
  SurfaceWithFormat surfaceResult;
  ImageRegion region(aRegion);
  gfxRect imageRect(0, 0, mImageSize.width, mImageSize.height);

  {
    MonitorAutoLock lock(mMonitor);

    // Possibly convert this image into a GPU texture, this may also cause our
    // mLockedSurface to be released and the OS to release the underlying
    // memory.
    Optimize(aContext->GetDrawTarget());

    bool doPartialDecode = !AreAllPixelsWritten();

    // Most draw targets will just use the surface only during DrawPixelSnapped
    // but captures/recordings will retain a reference outside this stack
    // context. While in theory a decoder thread could be trying to recycle this
    // frame at this very moment, in practice the only way we can get here is if
    // this frame is the current frame of the animation. Since we can only
    // advance on the main thread, we know nothing else will try to use it.
    DrawTarget* drawTarget = aContext->GetDrawTarget();
    bool recording = drawTarget->GetBackendType() == BackendType::RECORDING;
    bool temporary = !drawTarget->IsCaptureDT() && !recording;
    RefPtr<SourceSurface> surf = GetSourceSurfaceInternal(temporary);
    if (!surf) {
      return false;
    }

    bool doTile = !imageRect.Contains(aRegion.Rect()) &&
                  !(aImageFlags & imgIContainer::FLAG_CLAMP);

    surfaceResult = SurfaceForDrawing(doPartialDecode, doTile, region, surf);

    // If we are recording, then we cannot recycle the surface. The blob
    // rasterizer is not properly synchronized for recycling in the compositor
    // process. The easiest thing to do is just mark the frames it consumes as
    // non-recyclable.
    if (recording && surfaceResult.IsValid()) {
      mShouldRecycle = false;
    }
  }

  if (surfaceResult.IsValid()) {
    gfxUtils::DrawPixelSnapped(aContext, surfaceResult.mDrawable,
                               imageRect.Size(), region, surfaceResult.mFormat,
                               aSamplingFilter, aImageFlags, aOpacity);
  }

  return true;
}

nsresult imgFrame::ImageUpdated(const nsIntRect& aUpdateRect) {
  MonitorAutoLock lock(mMonitor);
  return ImageUpdatedInternal(aUpdateRect);
}

nsresult imgFrame::ImageUpdatedInternal(const nsIntRect& aUpdateRect) {
  mMonitor.AssertCurrentThreadOwns();

  // Clamp to the frame rect to ensure that decoder bugs don't result in a
  // decoded rect that extends outside the bounds of the frame rect.
  IntRect updateRect = mFrameRect.Intersect(aUpdateRect);
  if (updateRect.IsEmpty()) {
    return NS_OK;
  }

  mDecoded.UnionRect(mDecoded, updateRect);

  // Paletted images cannot invalidate.
  if (mPalettedImageData) {
    return NS_OK;
  }

  // Update our invalidation counters for any consumers watching for changes
  // in the surface.
  if (mRawSurface) {
    mRawSurface->Invalidate(updateRect);
  }
  if (mLockedSurface && mRawSurface != mLockedSurface) {
    mLockedSurface->Invalidate(updateRect);
  }
  return NS_OK;
}

void imgFrame::Finish(Opacity aFrameOpacity /* = Opacity::SOME_TRANSPARENCY */,
                      bool aFinalize /* = true */) {
  MonitorAutoLock lock(mMonitor);
  MOZ_ASSERT(mLockCount > 0, "Image data should be locked");

  if (mPalettedImageData) {
    ImageUpdatedInternal(mFrameRect);
  } else if (!mDecoded.IsEqualEdges(mFrameRect)) {
    // The decoder should have produced rows starting from either the bottom or
    // the top of the image. We need to calculate the region for which we have
    // not yet invalidated.
    IntRect delta(0, 0, mFrameRect.width, 0);
    if (mDecoded.y == 0) {
      delta.y = mDecoded.height;
      delta.height = mFrameRect.height - mDecoded.height;
    } else if (mDecoded.y + mDecoded.height == mFrameRect.height) {
      delta.height = mFrameRect.height - mDecoded.y;
    } else {
      MOZ_ASSERT_UNREACHABLE("Decoder only updated middle of image!");
      delta = mFrameRect;
    }

    ImageUpdatedInternal(delta);
  }

  MOZ_ASSERT(mDecoded.IsEqualEdges(mFrameRect));

  if (aFinalize) {
    FinalizeSurfaceInternal();
  }

  mFinished = true;

  // The image is now complete, wake up anyone who's waiting.
  mMonitor.NotifyAll();
}

uint32_t imgFrame::GetImageBytesPerRow() const {
  mMonitor.AssertCurrentThreadOwns();

  if (mRawSurface) {
    return mFrameRect.Width() * BytesPerPixel(mFormat);
  }

  if (mPaletteDepth) {
    return mFrameRect.Width();
  }

  return 0;
}

uint32_t imgFrame::GetImageDataLength() const {
  return GetImageBytesPerRow() * mFrameRect.Height();
}

void imgFrame::GetImageData(uint8_t** aData, uint32_t* aLength) const {
  MonitorAutoLock lock(mMonitor);
  GetImageDataInternal(aData, aLength);
}

void imgFrame::GetImageDataInternal(uint8_t** aData, uint32_t* aLength) const {
  mMonitor.AssertCurrentThreadOwns();
  MOZ_ASSERT(mLockCount > 0, "Image data should be locked");

  if (mLockedSurface) {
    // TODO: This is okay for now because we only realloc shared surfaces on
    // the main thread after decoding has finished, but if animations want to
    // read frame data off the main thread, we will need to reconsider this.
    *aData = mLockedSurface->GetData();
    MOZ_ASSERT(
        *aData,
        "mLockedSurface is non-null, but GetData is null in GetImageData");
  } else if (mPalettedImageData) {
    *aData = mPalettedImageData + PaletteDataLength();
    MOZ_ASSERT(
        *aData,
        "mPalettedImageData is non-null, but result is null in GetImageData");
  } else {
    MOZ_ASSERT(
        false,
        "Have neither mLockedSurface nor mPalettedImageData in GetImageData");
    *aData = nullptr;
  }

  *aLength = GetImageDataLength();
}

uint8_t* imgFrame::GetImageData() const {
  uint8_t* data;
  uint32_t length;
  GetImageData(&data, &length);
  return data;
}

bool imgFrame::GetIsPaletted() const { return mPalettedImageData != nullptr; }

void imgFrame::GetPaletteData(uint32_t** aPalette, uint32_t* length) const {
  AssertImageDataLocked();

  if (!mPalettedImageData) {
    *aPalette = nullptr;
    *length = 0;
  } else {
    *aPalette = (uint32_t*)mPalettedImageData;
    *length = PaletteDataLength();
  }
}

uint32_t* imgFrame::GetPaletteData() const {
  uint32_t* data;
  uint32_t length;
  GetPaletteData(&data, &length);
  return data;
}

uint8_t* imgFrame::LockImageData(bool aOnlyFinished) {
  MonitorAutoLock lock(mMonitor);

  MOZ_ASSERT(mLockCount >= 0, "Unbalanced locks and unlocks");
  if (mLockCount < 0 || (aOnlyFinished && !mFinished)) {
    return nullptr;
  }

  uint8_t* data;
  if (mPalettedImageData) {
    data = mPalettedImageData;
  } else if (mLockedSurface) {
    data = mLockedSurface->GetData();
  } else {
    data = nullptr;
  }

  // If the raw data is still available, we should get a valid pointer for it.
  if (!data) {
    MOZ_ASSERT_UNREACHABLE("It's illegal to re-lock an optimized imgFrame");
    return nullptr;
  }

  ++mLockCount;
  return data;
}

void imgFrame::AssertImageDataLocked() const {
#ifdef DEBUG
  MonitorAutoLock lock(mMonitor);
  MOZ_ASSERT(mLockCount > 0, "Image data should be locked");
#endif
}

nsresult imgFrame::UnlockImageData() {
  MonitorAutoLock lock(mMonitor);

  MOZ_ASSERT(mLockCount > 0, "Unlocking an unlocked image!");
  if (mLockCount <= 0) {
    return NS_ERROR_FAILURE;
  }

  MOZ_ASSERT(mLockCount > 1 || mFinished || mAborted,
             "Should have Finish()'d or aborted before unlocking");

  mLockCount--;

  return NS_OK;
}

void imgFrame::SetOptimizable() {
  AssertImageDataLocked();
  MonitorAutoLock lock(mMonitor);
  mOptimizable = true;
}

void imgFrame::FinalizeSurface() {
  MonitorAutoLock lock(mMonitor);
  FinalizeSurfaceInternal();
}

void imgFrame::FinalizeSurfaceInternal() {
  mMonitor.AssertCurrentThreadOwns();

  // Not all images will have mRawSurface to finalize (i.e. paletted images).
  if (mShouldRecycle || !mRawSurface ||
      mRawSurface->GetType() != SurfaceType::DATA_SHARED) {
    return;
  }

  auto sharedSurf = static_cast<SourceSurfaceSharedData*>(mRawSurface.get());
  sharedSurf->Finalize();
}

already_AddRefed<SourceSurface> imgFrame::GetSourceSurface() {
  MonitorAutoLock lock(mMonitor);
  return GetSourceSurfaceInternal(/* aTemporary */ false);
}

already_AddRefed<SourceSurface> imgFrame::GetSourceSurfaceInternal(
    bool aTemporary) {
  mMonitor.AssertCurrentThreadOwns();

  if (mOptSurface) {
    if (mOptSurface->IsValid()) {
      RefPtr<SourceSurface> surf(mOptSurface);
      return surf.forget();
    } else {
      mOptSurface = nullptr;
    }
  }

  if (mLockedSurface) {
    // We don't need to create recycling wrapper for some callers because they
    // promise to release the surface immediately after.
    if (!aTemporary && mShouldRecycle) {
      RefPtr<SourceSurface> surf =
          new RecyclingSourceSurface(this, mLockedSurface);
      return surf.forget();
    }

    RefPtr<SourceSurface> surf(mLockedSurface);
    return surf.forget();
  }

  MOZ_ASSERT(!mShouldRecycle, "Should recycle but no locked surface!");

  if (!mRawSurface) {
    return nullptr;
  }

  return CreateLockedSurface(mRawSurface, mFrameRect.Size(), mFormat);
}

void imgFrame::Abort() {
  MonitorAutoLock lock(mMonitor);

  mAborted = true;

  // Wake up anyone who's waiting.
  mMonitor.NotifyAll();
}

bool imgFrame::IsAborted() const {
  MonitorAutoLock lock(mMonitor);
  return mAborted;
}

bool imgFrame::IsFinished() const {
  MonitorAutoLock lock(mMonitor);
  return mFinished;
}

void imgFrame::WaitUntilFinished() const {
  MonitorAutoLock lock(mMonitor);

  while (true) {
    // Return if we're aborted or complete.
    if (mAborted || mFinished) {
      return;
    }

    // Not complete yet, so we'll have to wait.
    mMonitor.Wait();
  }
}

bool imgFrame::AreAllPixelsWritten() const {
  mMonitor.AssertCurrentThreadOwns();
  return mDecoded.IsEqualInterior(mFrameRect);
}

bool imgFrame::GetCompositingFailed() const {
  MOZ_ASSERT(NS_IsMainThread());
  return mCompositingFailed;
}

void imgFrame::SetCompositingFailed(bool val) {
  MOZ_ASSERT(NS_IsMainThread());
  mCompositingFailed = val;
}

void imgFrame::AddSizeOfExcludingThis(MallocSizeOf aMallocSizeOf,
                                      const AddSizeOfCb& aCallback) const {
  MonitorAutoLock lock(mMonitor);

  AddSizeOfCbData metadata;
  if (mPalettedImageData) {
    metadata.heap += aMallocSizeOf(mPalettedImageData);
  }
  if (mLockedSurface) {
    metadata.heap += aMallocSizeOf(mLockedSurface);
  }
  if (mOptSurface) {
    metadata.heap += aMallocSizeOf(mOptSurface);
  }
  if (mRawSurface) {
    metadata.heap += aMallocSizeOf(mRawSurface);
    mRawSurface->AddSizeOfExcludingThis(aMallocSizeOf, metadata.heap,
                                        metadata.nonHeap, metadata.handles,
                                        metadata.externalId);
  }

  aCallback(metadata);
}

RecyclingSourceSurface::RecyclingSourceSurface(imgFrame* aParent,
                                               DataSourceSurface* aSurface)
    : mParent(aParent), mSurface(aSurface), mType(SurfaceType::DATA) {
  mParent->mMonitor.AssertCurrentThreadOwns();
  ++mParent->mRecycleLockCount;

  if (aSurface->GetType() == SurfaceType::DATA_SHARED) {
    mType = SurfaceType::DATA_RECYCLING_SHARED;
  }
}

RecyclingSourceSurface::~RecyclingSourceSurface() {
  MonitorAutoLock lock(mParent->mMonitor);
  MOZ_ASSERT(mParent->mRecycleLockCount > 0);
  if (--mParent->mRecycleLockCount == 0) {
    mParent->mMonitor.NotifyAll();
  }
}

}  // namespace image
}  // namespace mozilla