gecko-dev/config/tests/unitMozZipFile.py

# ***** BEGIN LICENSE BLOCK *****
# Version: MPL 1.1/GPL 2.0/LGPL 2.1
#
# The contents of this file are subject to the Mozilla Public License Version
# 1.1 (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
# http://www.mozilla.org/MPL/
#
# Software distributed under the License is distributed on an "AS IS" basis,
# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
# for the specific language governing rights and limitations under the
# License.
#
# The Original Code is Mozilla build system.
#
# The Initial Developer of the Original Code is
# Mozilla Foundation.
# Portions created by the Initial Developer are Copyright (C) 2007
# the Initial Developer. All Rights Reserved.
#
# Contributor(s):
#  Axel Hecht <axel@pike.org>
#
# Alternatively, the contents of this file may be used under the terms of
# either the GNU General Public License Version 2 or later (the "GPL"), or
# the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
# in which case the provisions of the GPL or the LGPL are applicable instead
# of those above. If you wish to allow use of your version of this file only
# under the terms of either the GPL or the LGPL, and not to allow others to
# use your version of this file under the terms of the MPL, indicate your
# decision by deleting the provisions above and replace them with the notice
# and other provisions required by the GPL or the LGPL. If you do not delete
# the provisions above, a recipient may use your version of this file under
# the terms of any one of the MPL, the GPL or the LGPL.
#
# ***** END LICENSE BLOCK *****

import unittest

import shutil
import os
import re
import sys
import random
import copy
from string import letters

'''
Test case infrastructure for MozZipFile.

This isn't really a unit test, but a test case generator and runner.
For a given set of files, lengths, and number of writes, we create 
a testcase for every combination of the three. There are some
symmetries used to reduce the number of test cases, the first file
written is always the first file, the second is either the first or
the second, the third is one of the first three. That is, if we
had 4 files, but only three writes, the fourth file would never even
get tried.

The content written to the jars is pseudorandom with a fixed seed.
'''

if not __file__:
  __file__ = sys.argv[0]
sys.path.append(os.path.join(os.path.dirname(__file__), '..'))

from MozZipFile import ZipFile
import zipfile

leafs = (
  'firstdir/oneleaf',
  'seconddir/twoleaf',
  'thirddir/with/sub/threeleaf')
_lengths = map(lambda n: n * 64, [16, 64, 80])
lengths = 3
writes = 5

def givenlength(i):
  '''Return a length given in the _lengths array to allow manual
  tuning of which lengths of zip entries to use.
  '''
  return _lengths[i]


def prod(*iterables):
  ''''Tensor product of a list of iterables.

  This generator returns lists of items, one of each given
  iterable. It iterates over all possible combinations.
  '''
  for item in iterables[0]:
    if len(iterables) == 1:
      yield [item]
    else:
      for others in prod(*iterables[1:]):
        yield [item] + others


def getid(descs):
  'Convert a list of ints to a string.'
  return reduce(lambda x,y: x+'%d%d'%tuple(y), descs,'')


def getContent(length):
  'Get pseudo random content of given length.'
  rv = [None] * length
  for i in xrange(length):
    rv[i] = random.choice(letters)
  return ''.join(rv)


def createWriter(sizer, *items):
  'Helper method to fill in tests, one set of writes, one for each item'
  locitems = copy.deepcopy(items)
  for item in locitems:
    item['length'] = sizer(item.pop('length', 0))
  def helper(self):
    mode  = 'w'
    if os.path.isfile(self.f):
      mode = 'a'
    zf = ZipFile(self.f, mode, self.compression)
    for item in locitems:
      self._write(zf, **item)
    zf = None
    pass
  return helper

def createTester(name, *writes):
  '''Helper method to fill in tests, calls into a list of write
  helper methods.
  '''
  _writes = copy.copy(writes)
  def tester(self):
    for w in _writes:
      getattr(self, w)()
    self._verifyZip()
    pass
  # unit tests get confused if the method name isn't test...
  tester.__name__ = name
  return tester

class TestExtensiveStored(unittest.TestCase):
  '''Unit tests for MozZipFile

  The testcase are actually populated by code following the class
  definition.
  '''
  
  stage = "mozzipfilestage"
  compression = zipfile.ZIP_STORED

  def leaf(self, *leafs):
    return os.path.join(self.stage, *leafs)
  def setUp(self):
    if os.path.exists(self.stage):
      shutil.rmtree(self.stage)
    os.mkdir(self.stage)
    self.f = self.leaf('test.jar')
    self.ref = {}
    self.seed = 0
  
  def tearDown(self):
    self.f = None
    self.ref = None
  
  def _verifyZip(self):
    zf = zipfile.ZipFile(self.f)
    badEntry = zf.testzip()
    self.failIf(badEntry, badEntry)
    zlist = zf.namelist()
    zlist.sort()
    vlist = self.ref.keys()
    vlist.sort()
    self.assertEqual(zlist, vlist)
    for leaf, content in self.ref.iteritems():
      zcontent = zf.read(leaf)
      self.assertEqual(content, zcontent)
  
  def _write(self, zf, seed=None, leaf=0, length=0):
    if seed is None:
      seed = self.seed
      self.seed += 1
    random.seed(seed)
    leaf = leafs[leaf]
    content = getContent(length)
    self.ref[leaf] = content
    zf.writestr(leaf, content)
    dir = os.path.dirname(self.leaf('stage', leaf))
    if not os.path.isdir(dir):
      os.makedirs(dir)
    open(self.leaf('stage', leaf), 'w').write(content)

# all leafs in all lengths
atomics = list(prod(xrange(len(leafs)), xrange(lengths)))

# populate TestExtensiveStore with testcases
for w in xrange(writes):
  # Don't iterate over all files for the the first n passes,
  # those are redundant as long as w < lengths.
  # There are symmetries in the trailing end, too, but I don't know
  # how to reduce those out right now.
  nonatomics = [list(prod(range(min(i,len(leafs))), xrange(lengths)))
                for i in xrange(1, w+1)] + [atomics]
  for descs in prod(*nonatomics):
    suffix = getid(descs)
    dicts = [dict(leaf=leaf, length=length) for leaf, length in descs]
    setattr(TestExtensiveStored, '_write' + suffix,
            createWriter(givenlength, *dicts))
    setattr(TestExtensiveStored, 'test' + suffix,
            createTester('test' + suffix, '_write' + suffix))

# now create another round of tests, with two writing passes
# first, write all file combinations into the jar, close it,
# and then write all atomics again.
# This should catch more or less all artifacts generated
# by the final ordering step when closing the jar.
files = [list(prod([i], xrange(lengths))) for i in xrange(len(leafs))]
allfiles = reduce(lambda l,r:l+r,
                  [list(prod(*files[:(i+1)])) for i in xrange(len(leafs))])

for first in allfiles:
  testbasename = 'test%s_' % getid(first)
  test = [None, '_write' + getid(first), None]
  for second in atomics:
    test[0] = testbasename + getid([second])
    test[2] = '_write' + getid([second])
    setattr(TestExtensiveStored, test[0], createTester(*test))

class TestExtensiveDeflated(TestExtensiveStored):
  'Test all that has been tested with ZIP_STORED with DEFLATED, too.'
  compression = zipfile.ZIP_DEFLATED

if __name__ == '__main__':
  unittest.main()