gecko-dev/modules/libjar/nsJARProtocolHandler.cpp

181 строка
4.3 KiB
C++
Исходник Обычный вид История

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
2012-05-21 15:12:37 +04:00
/* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/. */
#include "mozilla/ClearOnShutdown.h"
#include "nsAutoPtr.h"
#include "nsJARProtocolHandler.h"
#include "nsIIOService.h"
#include "nsCRT.h"
#include "nsIComponentManager.h"
#include "nsIServiceManager.h"
#include "nsJARURI.h"
#include "nsIURL.h"
#include "nsJARChannel.h"
#include "nsString.h"
#include "nsNetCID.h"
#include "nsIMIMEService.h"
#include "nsMimeTypes.h"
#include "nsThreadUtils.h"
static NS_DEFINE_CID(kZipReaderCacheCID, NS_ZIPREADERCACHE_CID);
#define NS_JAR_CACHE_SIZE 32
//-----------------------------------------------------------------------------
StaticRefPtr<nsJARProtocolHandler> gJarHandler;
nsJARProtocolHandler::nsJARProtocolHandler()
{
MOZ_ASSERT(NS_IsMainThread());
}
nsJARProtocolHandler::~nsJARProtocolHandler()
{}
nsresult
nsJARProtocolHandler::Init()
{
nsresult rv;
mJARCache = do_CreateInstance(kZipReaderCacheCID, &rv);
if (NS_FAILED(rv)) return rv;
rv = mJARCache->Init(NS_JAR_CACHE_SIZE);
return rv;
}
nsIMIMEService *
nsJARProtocolHandler::MimeService()
{
if (!mMimeService)
mMimeService = do_GetService("@mozilla.org/mime;1");
return mMimeService.get();
}
NS_IMPL_ISUPPORTS(nsJARProtocolHandler,
nsIJARProtocolHandler,
nsIProtocolHandler,
nsISupportsWeakReference)
already_AddRefed<nsJARProtocolHandler>
nsJARProtocolHandler::GetSingleton()
{
if (!gJarHandler) {
gJarHandler = new nsJARProtocolHandler();
if (NS_SUCCEEDED(gJarHandler->Init())) {
ClearOnShutdown(&gJarHandler);
} else {
gJarHandler = nullptr;
}
}
return do_AddRef(gJarHandler);
}
NS_IMETHODIMP
nsJARProtocolHandler::GetJARCache(nsIZipReaderCache* *result)
{
*result = mJARCache;
NS_ADDREF(*result);
return NS_OK;
}
////////////////////////////////////////////////////////////////////////////////
// nsIProtocolHandler methods:
NS_IMETHODIMP
nsJARProtocolHandler::GetScheme(nsACString &result)
{
result.AssignLiteral("jar");
return NS_OK;
}
NS_IMETHODIMP
nsJARProtocolHandler::GetDefaultPort(int32_t *result)
{
*result = -1; // no port for JAR: URLs
return NS_OK;
}
NS_IMETHODIMP
nsJARProtocolHandler::GetProtocolFlags(uint32_t *result)
{
// URI_LOADABLE_BY_ANYONE, since it's our inner URI that will matter
// anyway.
*result = URI_NORELATIVE | URI_NOAUTH | URI_LOADABLE_BY_ANYONE;
/* Although jar uris have their own concept of relative urls
it is very different from the standard behaviour, so we
have to say norelative here! */
return NS_OK;
}
NS_IMETHODIMP
nsJARProtocolHandler::NewURI(const nsACString &aSpec,
const char *aCharset,
nsIURI *aBaseURI,
nsIURI **result)
{
nsresult rv = NS_OK;
Bug 1207245 - part 6 - rename nsRefPtr<T> to RefPtr<T>; r=ehsan; a=Tomcat The bulk of this commit was generated with a script, executed at the top level of a typical source code checkout. The only non-machine-generated part was modifying MFBT's moz.build to reflect the new naming. CLOSED TREE makes big refactorings like this a piece of cake. # The main substitution. find . -name '*.cpp' -o -name '*.cc' -o -name '*.h' -o -name '*.mm' -o -name '*.idl'| \ xargs perl -p -i -e ' s/nsRefPtr\.h/RefPtr\.h/g; # handle includes s/nsRefPtr ?</RefPtr</g; # handle declarations and variables ' # Handle a special friend declaration in gfx/layers/AtomicRefCountedWithFinalize.h. perl -p -i -e 's/::nsRefPtr;/::RefPtr;/' gfx/layers/AtomicRefCountedWithFinalize.h # Handle nsRefPtr.h itself, a couple places that define constructors # from nsRefPtr, and code generators specially. We do this here, rather # than indiscriminantly s/nsRefPtr/RefPtr/, because that would rename # things like nsRefPtrHashtable. perl -p -i -e 's/nsRefPtr/RefPtr/g' \ mfbt/nsRefPtr.h \ xpcom/glue/nsCOMPtr.h \ xpcom/base/OwningNonNull.h \ ipc/ipdl/ipdl/lower.py \ ipc/ipdl/ipdl/builtin.py \ dom/bindings/Codegen.py \ python/lldbutils/lldbutils/utils.py # In our indiscriminate substitution above, we renamed # nsRefPtrGetterAddRefs, the class behind getter_AddRefs. Fix that up. find . -name '*.cpp' -o -name '*.h' -o -name '*.idl' | \ xargs perl -p -i -e 's/nsRefPtrGetterAddRefs/RefPtrGetterAddRefs/g' if [ -d .git ]; then git mv mfbt/nsRefPtr.h mfbt/RefPtr.h else hg mv mfbt/nsRefPtr.h mfbt/RefPtr.h fi --HG-- rename : mfbt/nsRefPtr.h => mfbt/RefPtr.h
2015-10-18 08:24:48 +03:00
RefPtr<nsJARURI> jarURI = new nsJARURI();
if (!jarURI)
return NS_ERROR_OUT_OF_MEMORY;
rv = jarURI->Init(aCharset);
NS_ENSURE_SUCCESS(rv, rv);
rv = jarURI->SetSpecWithBase(aSpec, aBaseURI);
if (NS_FAILED(rv))
return rv;
NS_ADDREF(*result = jarURI);
return rv;
}
NS_IMETHODIMP
nsJARProtocolHandler::NewChannel2(nsIURI* uri,
nsILoadInfo* aLoadInfo,
nsIChannel** result)
{
nsJARChannel *chan = new nsJARChannel();
if (!chan)
return NS_ERROR_OUT_OF_MEMORY;
NS_ADDREF(chan);
nsresult rv = chan->Init(uri);
if (NS_FAILED(rv)) {
NS_RELEASE(chan);
return rv;
}
// set the loadInfo on the new channel
rv = chan->SetLoadInfo(aLoadInfo);
if (NS_FAILED(rv)) {
NS_RELEASE(chan);
return rv;
}
*result = chan;
return NS_OK;
}
NS_IMETHODIMP
nsJARProtocolHandler::NewChannel(nsIURI *uri, nsIChannel **result)
{
return NewChannel2(uri, nullptr, result);
}
Bit checkin for bug 68045, r/sr=waterson&shaver, second attempt. It all works for me on optimized and debug gcc2.96, rh7.1. - Better failure codes from nsXULPrototypeScript::Deserialize. - Call nsXULDocument::AbortFastLoads after nsXULPrototypeScript::Serialize failure, instead of just nulling the FastLoad service's output stream. - Expose nsXULDocument::AbortFastLoads via nsIXULPrototypeCache, for use from nsChromeProtocolHandler.cpp. AbortFastLoads flushes the XUL cache now, for good measure. - The needless "Current" adjective in nsIFastLoadService attribute and method names is no more. - Add a do_GetFastLoadService() helper, to use CID instead of contractid, and to let the compiler consolidate the static inline CID. - Add "nglayout.debug.checksum_xul_fastload_file" pref so people can do without the checksum verification step when reading a FastLoad file. - Verify the FastLoad file checksum, by default. Also, cache it in the FastLoad service so we don't recompute it when re-opening the FastLoad file as mailnews and other top-levels start up. Fill the checksum cache in EndFastLoad, when the last pseudo-concurrent top-level finishes loading. My hope to compute the checksum while writing the FastLoad file ran afoul of misordered writes. The old code to checksum the in-memory nsFastLoadHeader also was broken on little endian platforms. Now all checksumming is done via a separate read pass over the complete file, save for the header's checksum field, which is summed as if it contained zero. - Track and check FastLoad file dependencies. This required groveling with a bunch of Necko interfaces in nsChromeProtocolHandler::NewChannel -- read it and weep. Dependency checking, as well as checksum access and computation, use better-factored nsIFastLoad{File,Read,Write}Control interfaces. - nsBufferedStream::Seek wasn't flushing the buffer when seeking backward within the buffer, but it must, because mCursor bounds the amount to write if the buffer contains the end of file. - Add an unbufferedStream readonly attribute to nsIStreamBufferAccess, so we don't have to screw around with the bufferying layer when checksumming. Also implement nsIStreamBufferAccess in nsBufferedOutputStream. - nsISeekableOutputStream was bogus, based on a bad state I had put the nsBufferedOutputStream code in on its way from being completely broken when you seek backwards outside of the buffer. Removing this interface required using nsIFastLoadFileIO in nsFastLoadFileWriter, and it also required careful ordering of Close calls (the Reader must close after the Writer or Updater, so that the Reader's underlying, unbuffered input stream can be read by nsFastLoadFileWriter::Close to compute the checksum. - Miscellaneous tab/indentation, comment typo, bracing, if( => if ( style, nsnull vs. 0, useless variable elimination, tortured control flow, AutoString instead of String, and gratuitous ; after nsISupportsUtils.h macro call cleanups.
2001-08-22 00:51:34 +04:00
NS_IMETHODIMP
nsJARProtocolHandler::AllowPort(int32_t port, const char *scheme, bool *_retval)
{
Bit checkin for bug 68045, r/sr=waterson&shaver, second attempt. It all works for me on optimized and debug gcc2.96, rh7.1. - Better failure codes from nsXULPrototypeScript::Deserialize. - Call nsXULDocument::AbortFastLoads after nsXULPrototypeScript::Serialize failure, instead of just nulling the FastLoad service's output stream. - Expose nsXULDocument::AbortFastLoads via nsIXULPrototypeCache, for use from nsChromeProtocolHandler.cpp. AbortFastLoads flushes the XUL cache now, for good measure. - The needless "Current" adjective in nsIFastLoadService attribute and method names is no more. - Add a do_GetFastLoadService() helper, to use CID instead of contractid, and to let the compiler consolidate the static inline CID. - Add "nglayout.debug.checksum_xul_fastload_file" pref so people can do without the checksum verification step when reading a FastLoad file. - Verify the FastLoad file checksum, by default. Also, cache it in the FastLoad service so we don't recompute it when re-opening the FastLoad file as mailnews and other top-levels start up. Fill the checksum cache in EndFastLoad, when the last pseudo-concurrent top-level finishes loading. My hope to compute the checksum while writing the FastLoad file ran afoul of misordered writes. The old code to checksum the in-memory nsFastLoadHeader also was broken on little endian platforms. Now all checksumming is done via a separate read pass over the complete file, save for the header's checksum field, which is summed as if it contained zero. - Track and check FastLoad file dependencies. This required groveling with a bunch of Necko interfaces in nsChromeProtocolHandler::NewChannel -- read it and weep. Dependency checking, as well as checksum access and computation, use better-factored nsIFastLoad{File,Read,Write}Control interfaces. - nsBufferedStream::Seek wasn't flushing the buffer when seeking backward within the buffer, but it must, because mCursor bounds the amount to write if the buffer contains the end of file. - Add an unbufferedStream readonly attribute to nsIStreamBufferAccess, so we don't have to screw around with the bufferying layer when checksumming. Also implement nsIStreamBufferAccess in nsBufferedOutputStream. - nsISeekableOutputStream was bogus, based on a bad state I had put the nsBufferedOutputStream code in on its way from being completely broken when you seek backwards outside of the buffer. Removing this interface required using nsIFastLoadFileIO in nsFastLoadFileWriter, and it also required careful ordering of Close calls (the Reader must close after the Writer or Updater, so that the Reader's underlying, unbuffered input stream can be read by nsFastLoadFileWriter::Close to compute the checksum. - Miscellaneous tab/indentation, comment typo, bracing, if( => if ( style, nsnull vs. 0, useless variable elimination, tortured control flow, AutoString instead of String, and gratuitous ; after nsISupportsUtils.h macro call cleanups.
2001-08-22 00:51:34 +04:00
// don't override anything.
*_retval = false;
return NS_OK;
}
////////////////////////////////////////////////////////////////////////////////