gecko-dev/config/faster/rules.mk

# This Source Code Form is subject to the terms of the Mozilla Public
# License, v. 2.0. If a copy of the MPL was not distributed with this
# file, You can obtain one at http://mozilla.org/MPL/2.0/.

# /!\ Please make sure to update the following comment when you touch this
# file. Thank you /!\

# The traditional Mozilla build system relied on going through the entire
# build tree a number of times with different targets, and many of the
# things happening at each step required other things happening in previous
# steps without any documentation of those dependencies.
#
# This new build system tries to start afresh by establishing what files or
# operations are needed for the build, and applying the necessary rules to
# have those in place, relying on make dependencies to get them going.
#
# As of writing, only building non-compiled parts of Firefox is supported
# here (a few other things are also left out). This is a starting point, with
# the intent to grow this build system to make it more complete.
#
# This file contains rules and dependencies to get things working. The intent
# is for a Makefile to define some dependencies and variables, and include
# this file. What needs to be defined there, and ends up being generated by
# python/mozbuild/mozbuild/backend/fastermake.py is the following:
# - TOPSRCDIR/TOPOBJDIR, respectively the top source directory and the top
#   object directory
# - PYTHON, the path to the python executable
# - ACDEFINES, which contains a set of -Dvar=name to be used during
#   preprocessing
# - MOZ_CHROME_FILE_FORMAT, which defines whether to use file copies or
#   symbolic links
# - JAR_MN_TARGETS, which defines the targets to use for jar manifest
#   processing, see further below
# - PP_TARGETS, which defines the file paths of preprocessed files, see
#   further below
# - INSTALL_MANIFESTS, which defines the list of base directories handled
#   by install manifests, see further below
# - MANIFEST_TARGETS, which defines the file paths of chrome manifests, see
#   further below
#
# A convention used between this file and the Makefile including it is that
# global Make variables names are uppercase, while "local" Make variables
# applied to specific targets are lowercase.

# Targets to be triggered for a default build
default: $(addprefix install-,$(INSTALL_MANIFESTS))
default: $(addprefix jar-,$(JAR_MN_TARGETS))

# Explicit files to be built for a default build
default: $(addprefix $(TOPOBJDIR)/,$(PP_TARGETS))
default: $(addprefix $(TOPOBJDIR)/,$(MANIFEST_TARGETS))
default: $(TOPOBJDIR)/dist/bin/greprefs.js
default: $(TOPOBJDIR)/dist/bin/platform.ini
default: $(TOPOBJDIR)/dist/bin/webapprt/webapprt.ini

# Targets from the recursive make backend to be built for a default build
default: $(TOPOBJDIR)/config/makefiles/xpidl/xpidl

.PHONY: FORCE

# Extra define to trigger some workarounds. We should strive to limit the
# use of those. As of writing the only one is in
# toolkit/content/buildconfig.html.
ACDEFINES += -DBUILD_FASTER

# Generic rule to fall back to the recursive make backend
$(TOPOBJDIR)/%: FORCE
	$(MAKE) -C $(dir $@) $(notdir $@)

# Files under the faster/ sub-directory, however, are not meant to use the
# fallback
$(TOPOBJDIR)/faster/%: ;

# And files under dist/ are meant to be copied from their first dependency
# if there is no other rule.
$(TOPOBJDIR)/dist/%:
	rm -f $@
	cp $< $@

# Install files using install manifests
#
# The list of base directories is given in INSTALL_MANIFESTS. The
# corresponding install manifests are named correspondingly, with forward
# slashes replaced with underscores, and prefixed with `install_`. That is,
# the install manifest for `dist/bin` would be `install_dist_bin`.
$(addprefix install-,$(INSTALL_MANIFESTS)): install-%:
	$(PYTHON) -m mozbuild.action.process_install_manifest \
		--no-remove \
		--no-remove-empty-directories \
		$(TOPOBJDIR)/$* \
		install_$(subst /,_,$*)

# Preprocessed files. Ideally they would be using install manifests but
# right now, it's not possible because of things like APP_BUILDID or
# nsURLFormatter.js.
#
# The list of preprocessed files is defined in PP_TARGETS. The list is
# relative to TOPOBJDIR.
# The source file for each of those preprocessed files is defined as a Make
# dependency for the $(TOPOBJDIR)/path target. For example:
#   PP_TARGETS = foo/bar
#   $(TOPOBJDIR)/foo/bar: /path/to/source/for/foo/bar.in
# The file name for the source doesn't need to be different.
# Additionally, extra defines can be specified for a given preprocessing
# by setting the `defines` variable specifically for the given target.
# For example:
#   $(TOPOBJDIR)/foo/bar: defines = -Dqux=foobar
$(addprefix $(TOPOBJDIR)/,$(PP_TARGETS)): Makefile
$(addprefix $(TOPOBJDIR)/,$(PP_TARGETS)): $(TOPOBJDIR)/%:
	$(PYTHON) -m mozbuild.action.preprocessor \
		--depend $(TOPOBJDIR)/faster/.deps/$(subst /,_,$*) \
		-DAB_CD=en-US \
		$(defines) \
		$(ACDEFINES) \
		$(MOZ_DEBUG_DEFINES) \
		$< \
		-o $@

# Include the dependency files from the above preprocessed files rule.
$(foreach pp_target,$(PP_TARGETS), \
	$(eval -include $(TOPOBJDIR)/faster/.deps/$(subst /,_,$(pp_target))))

# Install files from jar manifests. Ideally, they would be using install
# manifests, but the code to read jar manifests and emit appropriate
# install manifests is not there yet.
# Things missing:
# - DEFINES from config/config.mk
# - L10N
# - -e when USE_EXTENSION_MANIFEST is set in moz.build
#
# The list given in JAR_MN_TARGETS corresponds to the list of `jar-%` targets
# to be processed, with the `jar-` prefix stripped.
# The Makefile is expected to specify the source jar manifest as a dependency
# to each target. There is no expectation that the `jar-%` target name matches
# the source file name in any way. For example:
#   JAR_MN_TARGETS = foo
#   jar-foo: /path/to/some/jar.mn
# Additionally, extra defines can be specified for the processing of the jar
# manifest by settig the `defines` variable specifically for the given target.
# For example:
#   jar-foo: defines = -Dqux=foo
# The default base path where files are going to be installed is `dist/bin`.
# It is possible to use a different path by setting the `install_target`
# variable. For example:
#   jar-foo: install_target = dist/bin/foo
# When processing jar manifests, relative paths given inside a jar manifest
# can be resolved from an object directory. The default path for that object
# directory is the translation of the jar manifest directory path from the
# source directory to the object directory. That is, for
# $(TOPSRCDIR)/path/to/jar.mn, the default would be $(TOPOBJDIR)/path/to.
# In case a different path must be used for the object directory, the `objdir`
# variable can be set. For example:
#   jar-foo: objdir=/some/other/path
jar-%: objdir ?= $(dir $(patsubst $(TOPSRCDIR)%,$(TOPOBJDIR)%,$<))
jar-%: install_target ?= dist/bin
jar-%:
	cd $(objdir) && \
	$(PYTHON) -m mozbuild.action.jar_maker \
		-j $(TOPOBJDIR)/$(install_target)/chrome \
		-t $(TOPSRCDIR) \
		-f $(MOZ_CHROME_FILE_FORMAT) \
		-c $(dir $<)/en-US \
		-DAB_CD=en-US \
		$(defines) \
		$(ACDEFINES) \
		$(MOZ_DEBUG_DEFINES) \
		$<

# Create some chrome manifests
# This rule is forced to run every time because it may be updating files that
# already exit.
#
# The list of chrome manifests is given in MANIFEST_TARGETS, relative to the
# top object directory. The content for those manifests is given in the
# `content` variable associated with the target. For example:
#   MANIFEST_TARGETS = foo
#   $(TOPOBJDIR)/foo: content = "manifest foo.manifest" "manifest bar.manifest"
$(addprefix $(TOPOBJDIR)/,$(MANIFEST_TARGETS)): FORCE
	$(PYTHON) -m mozbuild.action.buildlist \
		$@ \
		$(content)

# ============================================================================
# Below is a set of additional dependencies and variables used to build things
# that are not supported by data in moz.build.

# GENERATED_FILES are not supported yet, and even if they were, the
# dependencies are missing information.
$(foreach p,linux osx windows,jar-browser-themes-$(p)-jar.mn): \
jar-browser-themes-%-jar.mn: \
	$(TOPOBJDIR)/browser/themes/%/tab-selected-end.svg \
	$(TOPOBJDIR)/browser/themes/%/tab-selected-start.svg

# Extra dependencies and/or definitions for preprocessed files.
$(TOPOBJDIR)/dist/bin/application.ini: $(TOPOBJDIR)/config/buildid
$(TOPOBJDIR)/dist/bin/application.ini: defines += \
	-DAPP_BUILDID=$(shell cat $(TOPOBJDIR)/config/buildid)

# Files to build with the recursive backend and simply copy
$(TOPOBJDIR)/dist/bin/greprefs.js: $(TOPOBJDIR)/modules/libpref/greprefs.js
$(TOPOBJDIR)/dist/bin/platform.ini: $(TOPOBJDIR)/toolkit/xre/platform.ini
$(TOPOBJDIR)/dist/bin/webapprt/webapprt.ini: $(TOPOBJDIR)/webapprt/webapprt.ini

# The xpidl target in config/makefiles/xpidl requires the install manifest for
# dist/idl to have been processed.
$(TOPOBJDIR)/config/makefiles/xpidl/xpidl: $(TOPOBJDIR)/install-dist_idl