gecko-dev/xpcom/threads/ThreadEventQueue.cpp

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

274 строки
8.6 KiB
C++
Исходник Обычный вид История

Bug 1382922 - Refactor event queue to allow multiple implementations (r=erahm) This patch refactors the nsThread event queue to clean it up and to make it easier to restructure. The fundamental concepts are as follows: Each nsThread will have a pointer to a refcounted SynchronizedEventQueue. A SynchronizedEQ takes care of doing the locking and condition variable work when posting and popping events. For the actual storage of events, it delegates to an AbstractEventQueue data structure. It keeps a UniquePtr to the AbstractEventQueue that it uses for storage. Both SynchronizedEQ and AbstractEventQueue are abstract classes. There is only one concrete implementation of SynchronizedEQ in this patch, which is called ThreadEventQueue. ThreadEventQueue uses locks and condition variables to post and pop events the same way nsThread does. It also encapsulates the functionality that DOM workers need to implement their special event loops (PushEventQueue and PopEventQueue). In later Quantum DOM work, I plan to have another SynchronizedEQ implementation for the main thread, called SchedulerEventQueue. It will have special code for the cooperatively scheduling threads in Quantum DOM. There are two concrete implementations of AbstractEventQueue in this patch: EventQueue and PrioritizedEventQueue. EventQueue replaces the old nsEventQueue. The other AbstractEventQueue implementation is PrioritizedEventQueue, which uses multiple queues for different event priorities. The final major piece here is ThreadEventTarget, which splits some of the code for posting events out of nsThread. Eventually, my plan is for multiple cooperatively scheduled nsThreads to be able to share a ThreadEventTarget. In this patch, though, each nsThread has its own ThreadEventTarget. The class's purpose is just to collect some related code together. One final note: I tried to avoid virtual dispatch overhead as much as possible. Calls to SynchronizedEQ methods do use virtual dispatch, since I plan to use different implementations for different threads with Quantum DOM. But all the calls to EventQueue methods should be non-virtual. Although the methods are declared virtual, all the classes used are final and the concrete classes involved should all be known through templatization. MozReview-Commit-ID: 9Evtr9oIJvx
2017-06-21 05:42:13 +03:00
/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* vim: set ts=8 sts=2 et sw=2 tw=80: */
/* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/. */
#include "mozilla/ThreadEventQueue.h"
#include "mozilla/EventQueue.h"
#include "LeakRefPtr.h"
#include "nsComponentManagerUtils.h"
#include "nsIThreadInternal.h"
#include "nsThreadUtils.h"
#include "nsThread.h"
Bug 1382922 - Refactor event queue to allow multiple implementations (r=erahm) This patch refactors the nsThread event queue to clean it up and to make it easier to restructure. The fundamental concepts are as follows: Each nsThread will have a pointer to a refcounted SynchronizedEventQueue. A SynchronizedEQ takes care of doing the locking and condition variable work when posting and popping events. For the actual storage of events, it delegates to an AbstractEventQueue data structure. It keeps a UniquePtr to the AbstractEventQueue that it uses for storage. Both SynchronizedEQ and AbstractEventQueue are abstract classes. There is only one concrete implementation of SynchronizedEQ in this patch, which is called ThreadEventQueue. ThreadEventQueue uses locks and condition variables to post and pop events the same way nsThread does. It also encapsulates the functionality that DOM workers need to implement their special event loops (PushEventQueue and PopEventQueue). In later Quantum DOM work, I plan to have another SynchronizedEQ implementation for the main thread, called SchedulerEventQueue. It will have special code for the cooperatively scheduling threads in Quantum DOM. There are two concrete implementations of AbstractEventQueue in this patch: EventQueue and PrioritizedEventQueue. EventQueue replaces the old nsEventQueue. The other AbstractEventQueue implementation is PrioritizedEventQueue, which uses multiple queues for different event priorities. The final major piece here is ThreadEventTarget, which splits some of the code for posting events out of nsThread. Eventually, my plan is for multiple cooperatively scheduled nsThreads to be able to share a ThreadEventTarget. In this patch, though, each nsThread has its own ThreadEventTarget. The class's purpose is just to collect some related code together. One final note: I tried to avoid virtual dispatch overhead as much as possible. Calls to SynchronizedEQ methods do use virtual dispatch, since I plan to use different implementations for different threads with Quantum DOM. But all the calls to EventQueue methods should be non-virtual. Although the methods are declared virtual, all the classes used are final and the concrete classes involved should all be known through templatization. MozReview-Commit-ID: 9Evtr9oIJvx
2017-06-21 05:42:13 +03:00
#include "ThreadEventTarget.h"
#include "mozilla/ProfilerLabels.h"
#include "mozilla/TaskController.h"
#include "mozilla/StaticPrefs_threads.h"
Bug 1382922 - Refactor event queue to allow multiple implementations (r=erahm) This patch refactors the nsThread event queue to clean it up and to make it easier to restructure. The fundamental concepts are as follows: Each nsThread will have a pointer to a refcounted SynchronizedEventQueue. A SynchronizedEQ takes care of doing the locking and condition variable work when posting and popping events. For the actual storage of events, it delegates to an AbstractEventQueue data structure. It keeps a UniquePtr to the AbstractEventQueue that it uses for storage. Both SynchronizedEQ and AbstractEventQueue are abstract classes. There is only one concrete implementation of SynchronizedEQ in this patch, which is called ThreadEventQueue. ThreadEventQueue uses locks and condition variables to post and pop events the same way nsThread does. It also encapsulates the functionality that DOM workers need to implement their special event loops (PushEventQueue and PopEventQueue). In later Quantum DOM work, I plan to have another SynchronizedEQ implementation for the main thread, called SchedulerEventQueue. It will have special code for the cooperatively scheduling threads in Quantum DOM. There are two concrete implementations of AbstractEventQueue in this patch: EventQueue and PrioritizedEventQueue. EventQueue replaces the old nsEventQueue. The other AbstractEventQueue implementation is PrioritizedEventQueue, which uses multiple queues for different event priorities. The final major piece here is ThreadEventTarget, which splits some of the code for posting events out of nsThread. Eventually, my plan is for multiple cooperatively scheduled nsThreads to be able to share a ThreadEventTarget. In this patch, though, each nsThread has its own ThreadEventTarget. The class's purpose is just to collect some related code together. One final note: I tried to avoid virtual dispatch overhead as much as possible. Calls to SynchronizedEQ methods do use virtual dispatch, since I plan to use different implementations for different threads with Quantum DOM. But all the calls to EventQueue methods should be non-virtual. Although the methods are declared virtual, all the classes used are final and the concrete classes involved should all be known through templatization. MozReview-Commit-ID: 9Evtr9oIJvx
2017-06-21 05:42:13 +03:00
using namespace mozilla;
class ThreadEventQueue::NestedSink : public ThreadTargetSink {
Bug 1382922 - Refactor event queue to allow multiple implementations (r=erahm) This patch refactors the nsThread event queue to clean it up and to make it easier to restructure. The fundamental concepts are as follows: Each nsThread will have a pointer to a refcounted SynchronizedEventQueue. A SynchronizedEQ takes care of doing the locking and condition variable work when posting and popping events. For the actual storage of events, it delegates to an AbstractEventQueue data structure. It keeps a UniquePtr to the AbstractEventQueue that it uses for storage. Both SynchronizedEQ and AbstractEventQueue are abstract classes. There is only one concrete implementation of SynchronizedEQ in this patch, which is called ThreadEventQueue. ThreadEventQueue uses locks and condition variables to post and pop events the same way nsThread does. It also encapsulates the functionality that DOM workers need to implement their special event loops (PushEventQueue and PopEventQueue). In later Quantum DOM work, I plan to have another SynchronizedEQ implementation for the main thread, called SchedulerEventQueue. It will have special code for the cooperatively scheduling threads in Quantum DOM. There are two concrete implementations of AbstractEventQueue in this patch: EventQueue and PrioritizedEventQueue. EventQueue replaces the old nsEventQueue. The other AbstractEventQueue implementation is PrioritizedEventQueue, which uses multiple queues for different event priorities. The final major piece here is ThreadEventTarget, which splits some of the code for posting events out of nsThread. Eventually, my plan is for multiple cooperatively scheduled nsThreads to be able to share a ThreadEventTarget. In this patch, though, each nsThread has its own ThreadEventTarget. The class's purpose is just to collect some related code together. One final note: I tried to avoid virtual dispatch overhead as much as possible. Calls to SynchronizedEQ methods do use virtual dispatch, since I plan to use different implementations for different threads with Quantum DOM. But all the calls to EventQueue methods should be non-virtual. Although the methods are declared virtual, all the classes used are final and the concrete classes involved should all be known through templatization. MozReview-Commit-ID: 9Evtr9oIJvx
2017-06-21 05:42:13 +03:00
public:
NestedSink(EventQueue* aQueue, ThreadEventQueue* aOwner)
: mQueue(aQueue), mOwner(aOwner) {}
bool PutEvent(already_AddRefed<nsIRunnable>&& aEvent,
EventQueuePriority aPriority) final {
return mOwner->PutEventInternal(std::move(aEvent), aPriority, this);
Bug 1382922 - Refactor event queue to allow multiple implementations (r=erahm) This patch refactors the nsThread event queue to clean it up and to make it easier to restructure. The fundamental concepts are as follows: Each nsThread will have a pointer to a refcounted SynchronizedEventQueue. A SynchronizedEQ takes care of doing the locking and condition variable work when posting and popping events. For the actual storage of events, it delegates to an AbstractEventQueue data structure. It keeps a UniquePtr to the AbstractEventQueue that it uses for storage. Both SynchronizedEQ and AbstractEventQueue are abstract classes. There is only one concrete implementation of SynchronizedEQ in this patch, which is called ThreadEventQueue. ThreadEventQueue uses locks and condition variables to post and pop events the same way nsThread does. It also encapsulates the functionality that DOM workers need to implement their special event loops (PushEventQueue and PopEventQueue). In later Quantum DOM work, I plan to have another SynchronizedEQ implementation for the main thread, called SchedulerEventQueue. It will have special code for the cooperatively scheduling threads in Quantum DOM. There are two concrete implementations of AbstractEventQueue in this patch: EventQueue and PrioritizedEventQueue. EventQueue replaces the old nsEventQueue. The other AbstractEventQueue implementation is PrioritizedEventQueue, which uses multiple queues for different event priorities. The final major piece here is ThreadEventTarget, which splits some of the code for posting events out of nsThread. Eventually, my plan is for multiple cooperatively scheduled nsThreads to be able to share a ThreadEventTarget. In this patch, though, each nsThread has its own ThreadEventTarget. The class's purpose is just to collect some related code together. One final note: I tried to avoid virtual dispatch overhead as much as possible. Calls to SynchronizedEQ methods do use virtual dispatch, since I plan to use different implementations for different threads with Quantum DOM. But all the calls to EventQueue methods should be non-virtual. Although the methods are declared virtual, all the classes used are final and the concrete classes involved should all be known through templatization. MozReview-Commit-ID: 9Evtr9oIJvx
2017-06-21 05:42:13 +03:00
}
void Disconnect(const MutexAutoLock& aProofOfLock) final { mQueue = nullptr; }
Bug 1382922 - Refactor event queue to allow multiple implementations (r=erahm) This patch refactors the nsThread event queue to clean it up and to make it easier to restructure. The fundamental concepts are as follows: Each nsThread will have a pointer to a refcounted SynchronizedEventQueue. A SynchronizedEQ takes care of doing the locking and condition variable work when posting and popping events. For the actual storage of events, it delegates to an AbstractEventQueue data structure. It keeps a UniquePtr to the AbstractEventQueue that it uses for storage. Both SynchronizedEQ and AbstractEventQueue are abstract classes. There is only one concrete implementation of SynchronizedEQ in this patch, which is called ThreadEventQueue. ThreadEventQueue uses locks and condition variables to post and pop events the same way nsThread does. It also encapsulates the functionality that DOM workers need to implement their special event loops (PushEventQueue and PopEventQueue). In later Quantum DOM work, I plan to have another SynchronizedEQ implementation for the main thread, called SchedulerEventQueue. It will have special code for the cooperatively scheduling threads in Quantum DOM. There are two concrete implementations of AbstractEventQueue in this patch: EventQueue and PrioritizedEventQueue. EventQueue replaces the old nsEventQueue. The other AbstractEventQueue implementation is PrioritizedEventQueue, which uses multiple queues for different event priorities. The final major piece here is ThreadEventTarget, which splits some of the code for posting events out of nsThread. Eventually, my plan is for multiple cooperatively scheduled nsThreads to be able to share a ThreadEventTarget. In this patch, though, each nsThread has its own ThreadEventTarget. The class's purpose is just to collect some related code together. One final note: I tried to avoid virtual dispatch overhead as much as possible. Calls to SynchronizedEQ methods do use virtual dispatch, since I plan to use different implementations for different threads with Quantum DOM. But all the calls to EventQueue methods should be non-virtual. Although the methods are declared virtual, all the classes used are final and the concrete classes involved should all be known through templatization. MozReview-Commit-ID: 9Evtr9oIJvx
2017-06-21 05:42:13 +03:00
size_t SizeOfExcludingThis(mozilla::MallocSizeOf aMallocSizeOf) const {
if (mQueue) {
return mQueue->SizeOfIncludingThis(aMallocSizeOf);
}
return 0;
}
Bug 1382922 - Refactor event queue to allow multiple implementations (r=erahm) This patch refactors the nsThread event queue to clean it up and to make it easier to restructure. The fundamental concepts are as follows: Each nsThread will have a pointer to a refcounted SynchronizedEventQueue. A SynchronizedEQ takes care of doing the locking and condition variable work when posting and popping events. For the actual storage of events, it delegates to an AbstractEventQueue data structure. It keeps a UniquePtr to the AbstractEventQueue that it uses for storage. Both SynchronizedEQ and AbstractEventQueue are abstract classes. There is only one concrete implementation of SynchronizedEQ in this patch, which is called ThreadEventQueue. ThreadEventQueue uses locks and condition variables to post and pop events the same way nsThread does. It also encapsulates the functionality that DOM workers need to implement their special event loops (PushEventQueue and PopEventQueue). In later Quantum DOM work, I plan to have another SynchronizedEQ implementation for the main thread, called SchedulerEventQueue. It will have special code for the cooperatively scheduling threads in Quantum DOM. There are two concrete implementations of AbstractEventQueue in this patch: EventQueue and PrioritizedEventQueue. EventQueue replaces the old nsEventQueue. The other AbstractEventQueue implementation is PrioritizedEventQueue, which uses multiple queues for different event priorities. The final major piece here is ThreadEventTarget, which splits some of the code for posting events out of nsThread. Eventually, my plan is for multiple cooperatively scheduled nsThreads to be able to share a ThreadEventTarget. In this patch, though, each nsThread has its own ThreadEventTarget. The class's purpose is just to collect some related code together. One final note: I tried to avoid virtual dispatch overhead as much as possible. Calls to SynchronizedEQ methods do use virtual dispatch, since I plan to use different implementations for different threads with Quantum DOM. But all the calls to EventQueue methods should be non-virtual. Although the methods are declared virtual, all the classes used are final and the concrete classes involved should all be known through templatization. MozReview-Commit-ID: 9Evtr9oIJvx
2017-06-21 05:42:13 +03:00
private:
friend class ThreadEventQueue;
// This is a non-owning reference. It must live at least until Disconnect is
// called to clear it out.
EventQueue* mQueue;
RefPtr<ThreadEventQueue> mOwner;
};
ThreadEventQueue::ThreadEventQueue(UniquePtr<EventQueue> aQueue,
bool aIsMainThread)
: mBaseQueue(std::move(aQueue)),
Bug 1382922 - Refactor event queue to allow multiple implementations (r=erahm) This patch refactors the nsThread event queue to clean it up and to make it easier to restructure. The fundamental concepts are as follows: Each nsThread will have a pointer to a refcounted SynchronizedEventQueue. A SynchronizedEQ takes care of doing the locking and condition variable work when posting and popping events. For the actual storage of events, it delegates to an AbstractEventQueue data structure. It keeps a UniquePtr to the AbstractEventQueue that it uses for storage. Both SynchronizedEQ and AbstractEventQueue are abstract classes. There is only one concrete implementation of SynchronizedEQ in this patch, which is called ThreadEventQueue. ThreadEventQueue uses locks and condition variables to post and pop events the same way nsThread does. It also encapsulates the functionality that DOM workers need to implement their special event loops (PushEventQueue and PopEventQueue). In later Quantum DOM work, I plan to have another SynchronizedEQ implementation for the main thread, called SchedulerEventQueue. It will have special code for the cooperatively scheduling threads in Quantum DOM. There are two concrete implementations of AbstractEventQueue in this patch: EventQueue and PrioritizedEventQueue. EventQueue replaces the old nsEventQueue. The other AbstractEventQueue implementation is PrioritizedEventQueue, which uses multiple queues for different event priorities. The final major piece here is ThreadEventTarget, which splits some of the code for posting events out of nsThread. Eventually, my plan is for multiple cooperatively scheduled nsThreads to be able to share a ThreadEventTarget. In this patch, though, each nsThread has its own ThreadEventTarget. The class's purpose is just to collect some related code together. One final note: I tried to avoid virtual dispatch overhead as much as possible. Calls to SynchronizedEQ methods do use virtual dispatch, since I plan to use different implementations for different threads with Quantum DOM. But all the calls to EventQueue methods should be non-virtual. Although the methods are declared virtual, all the classes used are final and the concrete classes involved should all be known through templatization. MozReview-Commit-ID: 9Evtr9oIJvx
2017-06-21 05:42:13 +03:00
mLock("ThreadEventQueue"),
mEventsAvailable(mLock, "EventsAvail"),
mIsMainThread(aIsMainThread) {
if (aIsMainThread) {
TaskController::Get()->SetConditionVariable(&mEventsAvailable);
}
Bug 1382922 - Refactor event queue to allow multiple implementations (r=erahm) This patch refactors the nsThread event queue to clean it up and to make it easier to restructure. The fundamental concepts are as follows: Each nsThread will have a pointer to a refcounted SynchronizedEventQueue. A SynchronizedEQ takes care of doing the locking and condition variable work when posting and popping events. For the actual storage of events, it delegates to an AbstractEventQueue data structure. It keeps a UniquePtr to the AbstractEventQueue that it uses for storage. Both SynchronizedEQ and AbstractEventQueue are abstract classes. There is only one concrete implementation of SynchronizedEQ in this patch, which is called ThreadEventQueue. ThreadEventQueue uses locks and condition variables to post and pop events the same way nsThread does. It also encapsulates the functionality that DOM workers need to implement their special event loops (PushEventQueue and PopEventQueue). In later Quantum DOM work, I plan to have another SynchronizedEQ implementation for the main thread, called SchedulerEventQueue. It will have special code for the cooperatively scheduling threads in Quantum DOM. There are two concrete implementations of AbstractEventQueue in this patch: EventQueue and PrioritizedEventQueue. EventQueue replaces the old nsEventQueue. The other AbstractEventQueue implementation is PrioritizedEventQueue, which uses multiple queues for different event priorities. The final major piece here is ThreadEventTarget, which splits some of the code for posting events out of nsThread. Eventually, my plan is for multiple cooperatively scheduled nsThreads to be able to share a ThreadEventTarget. In this patch, though, each nsThread has its own ThreadEventTarget. The class's purpose is just to collect some related code together. One final note: I tried to avoid virtual dispatch overhead as much as possible. Calls to SynchronizedEQ methods do use virtual dispatch, since I plan to use different implementations for different threads with Quantum DOM. But all the calls to EventQueue methods should be non-virtual. Although the methods are declared virtual, all the classes used are final and the concrete classes involved should all be known through templatization. MozReview-Commit-ID: 9Evtr9oIJvx
2017-06-21 05:42:13 +03:00
}
ThreadEventQueue::~ThreadEventQueue() { MOZ_ASSERT(mNestedQueues.IsEmpty()); }
Bug 1382922 - Refactor event queue to allow multiple implementations (r=erahm) This patch refactors the nsThread event queue to clean it up and to make it easier to restructure. The fundamental concepts are as follows: Each nsThread will have a pointer to a refcounted SynchronizedEventQueue. A SynchronizedEQ takes care of doing the locking and condition variable work when posting and popping events. For the actual storage of events, it delegates to an AbstractEventQueue data structure. It keeps a UniquePtr to the AbstractEventQueue that it uses for storage. Both SynchronizedEQ and AbstractEventQueue are abstract classes. There is only one concrete implementation of SynchronizedEQ in this patch, which is called ThreadEventQueue. ThreadEventQueue uses locks and condition variables to post and pop events the same way nsThread does. It also encapsulates the functionality that DOM workers need to implement their special event loops (PushEventQueue and PopEventQueue). In later Quantum DOM work, I plan to have another SynchronizedEQ implementation for the main thread, called SchedulerEventQueue. It will have special code for the cooperatively scheduling threads in Quantum DOM. There are two concrete implementations of AbstractEventQueue in this patch: EventQueue and PrioritizedEventQueue. EventQueue replaces the old nsEventQueue. The other AbstractEventQueue implementation is PrioritizedEventQueue, which uses multiple queues for different event priorities. The final major piece here is ThreadEventTarget, which splits some of the code for posting events out of nsThread. Eventually, my plan is for multiple cooperatively scheduled nsThreads to be able to share a ThreadEventTarget. In this patch, though, each nsThread has its own ThreadEventTarget. The class's purpose is just to collect some related code together. One final note: I tried to avoid virtual dispatch overhead as much as possible. Calls to SynchronizedEQ methods do use virtual dispatch, since I plan to use different implementations for different threads with Quantum DOM. But all the calls to EventQueue methods should be non-virtual. Although the methods are declared virtual, all the classes used are final and the concrete classes involved should all be known through templatization. MozReview-Commit-ID: 9Evtr9oIJvx
2017-06-21 05:42:13 +03:00
bool ThreadEventQueue::PutEvent(already_AddRefed<nsIRunnable>&& aEvent,
EventQueuePriority aPriority) {
return PutEventInternal(std::move(aEvent), aPriority, nullptr);
Bug 1382922 - Refactor event queue to allow multiple implementations (r=erahm) This patch refactors the nsThread event queue to clean it up and to make it easier to restructure. The fundamental concepts are as follows: Each nsThread will have a pointer to a refcounted SynchronizedEventQueue. A SynchronizedEQ takes care of doing the locking and condition variable work when posting and popping events. For the actual storage of events, it delegates to an AbstractEventQueue data structure. It keeps a UniquePtr to the AbstractEventQueue that it uses for storage. Both SynchronizedEQ and AbstractEventQueue are abstract classes. There is only one concrete implementation of SynchronizedEQ in this patch, which is called ThreadEventQueue. ThreadEventQueue uses locks and condition variables to post and pop events the same way nsThread does. It also encapsulates the functionality that DOM workers need to implement their special event loops (PushEventQueue and PopEventQueue). In later Quantum DOM work, I plan to have another SynchronizedEQ implementation for the main thread, called SchedulerEventQueue. It will have special code for the cooperatively scheduling threads in Quantum DOM. There are two concrete implementations of AbstractEventQueue in this patch: EventQueue and PrioritizedEventQueue. EventQueue replaces the old nsEventQueue. The other AbstractEventQueue implementation is PrioritizedEventQueue, which uses multiple queues for different event priorities. The final major piece here is ThreadEventTarget, which splits some of the code for posting events out of nsThread. Eventually, my plan is for multiple cooperatively scheduled nsThreads to be able to share a ThreadEventTarget. In this patch, though, each nsThread has its own ThreadEventTarget. The class's purpose is just to collect some related code together. One final note: I tried to avoid virtual dispatch overhead as much as possible. Calls to SynchronizedEQ methods do use virtual dispatch, since I plan to use different implementations for different threads with Quantum DOM. But all the calls to EventQueue methods should be non-virtual. Although the methods are declared virtual, all the classes used are final and the concrete classes involved should all be known through templatization. MozReview-Commit-ID: 9Evtr9oIJvx
2017-06-21 05:42:13 +03:00
}
bool ThreadEventQueue::PutEventInternal(already_AddRefed<nsIRunnable>&& aEvent,
EventQueuePriority aPriority,
NestedSink* aSink) {
Bug 1382922 - Refactor event queue to allow multiple implementations (r=erahm) This patch refactors the nsThread event queue to clean it up and to make it easier to restructure. The fundamental concepts are as follows: Each nsThread will have a pointer to a refcounted SynchronizedEventQueue. A SynchronizedEQ takes care of doing the locking and condition variable work when posting and popping events. For the actual storage of events, it delegates to an AbstractEventQueue data structure. It keeps a UniquePtr to the AbstractEventQueue that it uses for storage. Both SynchronizedEQ and AbstractEventQueue are abstract classes. There is only one concrete implementation of SynchronizedEQ in this patch, which is called ThreadEventQueue. ThreadEventQueue uses locks and condition variables to post and pop events the same way nsThread does. It also encapsulates the functionality that DOM workers need to implement their special event loops (PushEventQueue and PopEventQueue). In later Quantum DOM work, I plan to have another SynchronizedEQ implementation for the main thread, called SchedulerEventQueue. It will have special code for the cooperatively scheduling threads in Quantum DOM. There are two concrete implementations of AbstractEventQueue in this patch: EventQueue and PrioritizedEventQueue. EventQueue replaces the old nsEventQueue. The other AbstractEventQueue implementation is PrioritizedEventQueue, which uses multiple queues for different event priorities. The final major piece here is ThreadEventTarget, which splits some of the code for posting events out of nsThread. Eventually, my plan is for multiple cooperatively scheduled nsThreads to be able to share a ThreadEventTarget. In this patch, though, each nsThread has its own ThreadEventTarget. The class's purpose is just to collect some related code together. One final note: I tried to avoid virtual dispatch overhead as much as possible. Calls to SynchronizedEQ methods do use virtual dispatch, since I plan to use different implementations for different threads with Quantum DOM. But all the calls to EventQueue methods should be non-virtual. Although the methods are declared virtual, all the classes used are final and the concrete classes involved should all be known through templatization. MozReview-Commit-ID: 9Evtr9oIJvx
2017-06-21 05:42:13 +03:00
// We want to leak the reference when we fail to dispatch it, so that
// we won't release the event in a wrong thread.
LeakRefPtr<nsIRunnable> event(std::move(aEvent));
Bug 1382922 - Refactor event queue to allow multiple implementations (r=erahm) This patch refactors the nsThread event queue to clean it up and to make it easier to restructure. The fundamental concepts are as follows: Each nsThread will have a pointer to a refcounted SynchronizedEventQueue. A SynchronizedEQ takes care of doing the locking and condition variable work when posting and popping events. For the actual storage of events, it delegates to an AbstractEventQueue data structure. It keeps a UniquePtr to the AbstractEventQueue that it uses for storage. Both SynchronizedEQ and AbstractEventQueue are abstract classes. There is only one concrete implementation of SynchronizedEQ in this patch, which is called ThreadEventQueue. ThreadEventQueue uses locks and condition variables to post and pop events the same way nsThread does. It also encapsulates the functionality that DOM workers need to implement their special event loops (PushEventQueue and PopEventQueue). In later Quantum DOM work, I plan to have another SynchronizedEQ implementation for the main thread, called SchedulerEventQueue. It will have special code for the cooperatively scheduling threads in Quantum DOM. There are two concrete implementations of AbstractEventQueue in this patch: EventQueue and PrioritizedEventQueue. EventQueue replaces the old nsEventQueue. The other AbstractEventQueue implementation is PrioritizedEventQueue, which uses multiple queues for different event priorities. The final major piece here is ThreadEventTarget, which splits some of the code for posting events out of nsThread. Eventually, my plan is for multiple cooperatively scheduled nsThreads to be able to share a ThreadEventTarget. In this patch, though, each nsThread has its own ThreadEventTarget. The class's purpose is just to collect some related code together. One final note: I tried to avoid virtual dispatch overhead as much as possible. Calls to SynchronizedEQ methods do use virtual dispatch, since I plan to use different implementations for different threads with Quantum DOM. But all the calls to EventQueue methods should be non-virtual. Although the methods are declared virtual, all the classes used are final and the concrete classes involved should all be known through templatization. MozReview-Commit-ID: 9Evtr9oIJvx
2017-06-21 05:42:13 +03:00
nsCOMPtr<nsIThreadObserver> obs;
{
// Check if the runnable wants to override the passed-in priority.
// Do this outside the lock, so runnables implemented in JS can QI
// (and possibly GC) outside of the lock.
if (mIsMainThread) {
auto* e = event.get(); // can't do_QueryInterface on LeakRefPtr.
if (nsCOMPtr<nsIRunnablePriority> runnablePrio = do_QueryInterface(e)) {
uint32_t prio = nsIRunnablePriority::PRIORITY_NORMAL;
runnablePrio->GetPriority(&prio);
if (prio == nsIRunnablePriority::PRIORITY_CONTROL) {
aPriority = EventQueuePriority::Control;
} else if (prio == nsIRunnablePriority::PRIORITY_RENDER_BLOCKING) {
aPriority = EventQueuePriority::RenderBlocking;
} else if (prio == nsIRunnablePriority::PRIORITY_VSYNC) {
aPriority = EventQueuePriority::Vsync;
} else if (prio == nsIRunnablePriority::PRIORITY_INPUT_HIGH) {
aPriority = EventQueuePriority::InputHigh;
} else if (prio == nsIRunnablePriority::PRIORITY_MEDIUMHIGH) {
aPriority = EventQueuePriority::MediumHigh;
} else if (prio == nsIRunnablePriority::PRIORITY_DEFERRED_TIMERS) {
aPriority = EventQueuePriority::DeferredTimers;
} else if (prio == nsIRunnablePriority::PRIORITY_IDLE) {
aPriority = EventQueuePriority::Idle;
}
}
if (aPriority == EventQueuePriority::Control &&
!StaticPrefs::threads_control_event_queue_enabled()) {
aPriority = EventQueuePriority::MediumHigh;
}
}
Bug 1382922 - Refactor event queue to allow multiple implementations (r=erahm) This patch refactors the nsThread event queue to clean it up and to make it easier to restructure. The fundamental concepts are as follows: Each nsThread will have a pointer to a refcounted SynchronizedEventQueue. A SynchronizedEQ takes care of doing the locking and condition variable work when posting and popping events. For the actual storage of events, it delegates to an AbstractEventQueue data structure. It keeps a UniquePtr to the AbstractEventQueue that it uses for storage. Both SynchronizedEQ and AbstractEventQueue are abstract classes. There is only one concrete implementation of SynchronizedEQ in this patch, which is called ThreadEventQueue. ThreadEventQueue uses locks and condition variables to post and pop events the same way nsThread does. It also encapsulates the functionality that DOM workers need to implement their special event loops (PushEventQueue and PopEventQueue). In later Quantum DOM work, I plan to have another SynchronizedEQ implementation for the main thread, called SchedulerEventQueue. It will have special code for the cooperatively scheduling threads in Quantum DOM. There are two concrete implementations of AbstractEventQueue in this patch: EventQueue and PrioritizedEventQueue. EventQueue replaces the old nsEventQueue. The other AbstractEventQueue implementation is PrioritizedEventQueue, which uses multiple queues for different event priorities. The final major piece here is ThreadEventTarget, which splits some of the code for posting events out of nsThread. Eventually, my plan is for multiple cooperatively scheduled nsThreads to be able to share a ThreadEventTarget. In this patch, though, each nsThread has its own ThreadEventTarget. The class's purpose is just to collect some related code together. One final note: I tried to avoid virtual dispatch overhead as much as possible. Calls to SynchronizedEQ methods do use virtual dispatch, since I plan to use different implementations for different threads with Quantum DOM. But all the calls to EventQueue methods should be non-virtual. Although the methods are declared virtual, all the classes used are final and the concrete classes involved should all be known through templatization. MozReview-Commit-ID: 9Evtr9oIJvx
2017-06-21 05:42:13 +03:00
MutexAutoLock lock(mLock);
if (mEventsAreDoomed) {
return false;
}
if (aSink) {
if (!aSink->mQueue) {
return false;
}
aSink->mQueue->PutEvent(event.take(), aPriority, lock);
} else {
mBaseQueue->PutEvent(event.take(), aPriority, lock);
}
mEventsAvailable.Notify();
// Make sure to grab the observer before dropping the lock, otherwise the
// event that we just placed into the queue could run and eventually delete
// this nsThread before the calling thread is scheduled again. We would then
// crash while trying to access a dead nsThread.
obs = mObserver;
}
if (obs) {
obs->OnDispatchedEvent();
}
return true;
}
already_AddRefed<nsIRunnable> ThreadEventQueue::GetEvent(
bool aMayWait, mozilla::TimeDuration* aLastEventDelay) {
Bug 1382922 - Refactor event queue to allow multiple implementations (r=erahm) This patch refactors the nsThread event queue to clean it up and to make it easier to restructure. The fundamental concepts are as follows: Each nsThread will have a pointer to a refcounted SynchronizedEventQueue. A SynchronizedEQ takes care of doing the locking and condition variable work when posting and popping events. For the actual storage of events, it delegates to an AbstractEventQueue data structure. It keeps a UniquePtr to the AbstractEventQueue that it uses for storage. Both SynchronizedEQ and AbstractEventQueue are abstract classes. There is only one concrete implementation of SynchronizedEQ in this patch, which is called ThreadEventQueue. ThreadEventQueue uses locks and condition variables to post and pop events the same way nsThread does. It also encapsulates the functionality that DOM workers need to implement their special event loops (PushEventQueue and PopEventQueue). In later Quantum DOM work, I plan to have another SynchronizedEQ implementation for the main thread, called SchedulerEventQueue. It will have special code for the cooperatively scheduling threads in Quantum DOM. There are two concrete implementations of AbstractEventQueue in this patch: EventQueue and PrioritizedEventQueue. EventQueue replaces the old nsEventQueue. The other AbstractEventQueue implementation is PrioritizedEventQueue, which uses multiple queues for different event priorities. The final major piece here is ThreadEventTarget, which splits some of the code for posting events out of nsThread. Eventually, my plan is for multiple cooperatively scheduled nsThreads to be able to share a ThreadEventTarget. In this patch, though, each nsThread has its own ThreadEventTarget. The class's purpose is just to collect some related code together. One final note: I tried to avoid virtual dispatch overhead as much as possible. Calls to SynchronizedEQ methods do use virtual dispatch, since I plan to use different implementations for different threads with Quantum DOM. But all the calls to EventQueue methods should be non-virtual. Although the methods are declared virtual, all the classes used are final and the concrete classes involved should all be known through templatization. MozReview-Commit-ID: 9Evtr9oIJvx
2017-06-21 05:42:13 +03:00
nsCOMPtr<nsIRunnable> event;
Bug 1597158 part 4. Stop unlocking the provided mutex in IdlePeriodState methods. r=smaug The basic idea, suggested by Olli, is that we can try to get a runnable in ThreadEventQueue::GetEvent, and if that does not produce anything unlock our mutex, do whatever idle state updates we need to do, re-lock our mutex. Then always we need to try getting a runnable again, because a non-idle runnable might have gotten queued while we had the lock unlocked. So we can't sleep on our mutex, in the mayWait case, unless we try to get a runnable again first. My notes on the current (pre this patch) unlocking setup follow. ------------------------------------------------------------ There are four places where we currently unlock: 1) IdlePeriodState::GetIdleDeadlineInternal. Needed only when !aIsPeek, to RequestIdleToken, which can do IPC. The only caller, via GetDeadlineForIdleTask, is PrioritizedEventQueue::GetEvent and only when we selected the idle or deferred queue. We need this to set the proper deadline on the idle event. In the cases when this unlock happens we currently _never_ return an idle event, because if we got here that means that we do not have an idle token. 2) IdlePeriodState::GetLocalIdleDeadline. Needs to unlock to get the idle period hint. The can get called from GetIdleDeadlineInternal in _both_ cases: peek and get. The callstack for the get case is covered above. The peek case is called from PrioritizedEventQueue::HasReadyEvent which is called from ThreadEventQueue::HasPendingEvent. 3) IdlePeriodState::SetPaused, because it sends an IPC message. This is only called from EnsureIsPaused, which is called from: - IdlePeriodState::GetIdleDeadlineInternal. Only in the !aIsPeek case. - IdlePeriodState::RanOutOfTasks called from: - PrioritizedEventQueue::GetEvent if we fell into the idle case and our queues are empty. - PrioritizedEventQueue::DidRunEvent if we are empty. 4) IdlePeriodState::ClearIdleToken because it sends an IPC message. This is called from: - IdlePeriodState::RanOutOfTasks; see SetPaused. - IdlePeriodState::GetIdleDeadlineInternal like EnsureIsPaused. - IdlePeriodState::GetIdleToken if token is in the past. This is only called from GetIdleDeadlineInternal, both cases. - IdlePeriodState::FlagNotIdle called from PrioritizedEventQueue::GetEvent if we find an event in a non-idle queue. Or rewriting in terms of API entrypoints on IdlePeriodState that might need to unlock: * Anything to do with getting deadlines, whether we are peeking or getting. Basically, if we need an updated deadline we need to unlock. * When we have detected we are completely out of tasks (idle or not) to run. Right now we do that when either we're asked for an event and don't have one or if we run an event and are empty after that (before unlocking!). But the unlocking or not happens in nsThreadEventQueue::DidRunEvent, so separately from the getting of the event. In particular, we are unlocked before we enter DidRunEvent, and unlock again before we return from it, so we can do whatever updates we want there. * When we have detected that we have a non-idle event to run; this calls FlagNotIdle. Differential Revision: https://phabricator.services.mozilla.com/D53631 --HG-- extra : moz-landing-system : lando
2019-11-22 17:06:17 +03:00
{
// Scope for lock. When we are about to return, we will exit this
// scope so we can do some work after releasing the lock but
// before returning.
MutexAutoLock lock(mLock);
for (;;) {
const bool noNestedQueue = mNestedQueues.IsEmpty();
if (noNestedQueue) {
event = mBaseQueue->GetEvent(lock, aLastEventDelay);
Bug 1597158 part 4. Stop unlocking the provided mutex in IdlePeriodState methods. r=smaug The basic idea, suggested by Olli, is that we can try to get a runnable in ThreadEventQueue::GetEvent, and if that does not produce anything unlock our mutex, do whatever idle state updates we need to do, re-lock our mutex. Then always we need to try getting a runnable again, because a non-idle runnable might have gotten queued while we had the lock unlocked. So we can't sleep on our mutex, in the mayWait case, unless we try to get a runnable again first. My notes on the current (pre this patch) unlocking setup follow. ------------------------------------------------------------ There are four places where we currently unlock: 1) IdlePeriodState::GetIdleDeadlineInternal. Needed only when !aIsPeek, to RequestIdleToken, which can do IPC. The only caller, via GetDeadlineForIdleTask, is PrioritizedEventQueue::GetEvent and only when we selected the idle or deferred queue. We need this to set the proper deadline on the idle event. In the cases when this unlock happens we currently _never_ return an idle event, because if we got here that means that we do not have an idle token. 2) IdlePeriodState::GetLocalIdleDeadline. Needs to unlock to get the idle period hint. The can get called from GetIdleDeadlineInternal in _both_ cases: peek and get. The callstack for the get case is covered above. The peek case is called from PrioritizedEventQueue::HasReadyEvent which is called from ThreadEventQueue::HasPendingEvent. 3) IdlePeriodState::SetPaused, because it sends an IPC message. This is only called from EnsureIsPaused, which is called from: - IdlePeriodState::GetIdleDeadlineInternal. Only in the !aIsPeek case. - IdlePeriodState::RanOutOfTasks called from: - PrioritizedEventQueue::GetEvent if we fell into the idle case and our queues are empty. - PrioritizedEventQueue::DidRunEvent if we are empty. 4) IdlePeriodState::ClearIdleToken because it sends an IPC message. This is called from: - IdlePeriodState::RanOutOfTasks; see SetPaused. - IdlePeriodState::GetIdleDeadlineInternal like EnsureIsPaused. - IdlePeriodState::GetIdleToken if token is in the past. This is only called from GetIdleDeadlineInternal, both cases. - IdlePeriodState::FlagNotIdle called from PrioritizedEventQueue::GetEvent if we find an event in a non-idle queue. Or rewriting in terms of API entrypoints on IdlePeriodState that might need to unlock: * Anything to do with getting deadlines, whether we are peeking or getting. Basically, if we need an updated deadline we need to unlock. * When we have detected we are completely out of tasks (idle or not) to run. Right now we do that when either we're asked for an event and don't have one or if we run an event and are empty after that (before unlocking!). But the unlocking or not happens in nsThreadEventQueue::DidRunEvent, so separately from the getting of the event. In particular, we are unlocked before we enter DidRunEvent, and unlock again before we return from it, so we can do whatever updates we want there. * When we have detected that we have a non-idle event to run; this calls FlagNotIdle. Differential Revision: https://phabricator.services.mozilla.com/D53631 --HG-- extra : moz-landing-system : lando
2019-11-22 17:06:17 +03:00
} else {
// We always get events from the topmost queue when there are nested
// queues.
event =
mNestedQueues.LastElement().mQueue->GetEvent(lock, aLastEventDelay);
Bug 1597158 part 4. Stop unlocking the provided mutex in IdlePeriodState methods. r=smaug The basic idea, suggested by Olli, is that we can try to get a runnable in ThreadEventQueue::GetEvent, and if that does not produce anything unlock our mutex, do whatever idle state updates we need to do, re-lock our mutex. Then always we need to try getting a runnable again, because a non-idle runnable might have gotten queued while we had the lock unlocked. So we can't sleep on our mutex, in the mayWait case, unless we try to get a runnable again first. My notes on the current (pre this patch) unlocking setup follow. ------------------------------------------------------------ There are four places where we currently unlock: 1) IdlePeriodState::GetIdleDeadlineInternal. Needed only when !aIsPeek, to RequestIdleToken, which can do IPC. The only caller, via GetDeadlineForIdleTask, is PrioritizedEventQueue::GetEvent and only when we selected the idle or deferred queue. We need this to set the proper deadline on the idle event. In the cases when this unlock happens we currently _never_ return an idle event, because if we got here that means that we do not have an idle token. 2) IdlePeriodState::GetLocalIdleDeadline. Needs to unlock to get the idle period hint. The can get called from GetIdleDeadlineInternal in _both_ cases: peek and get. The callstack for the get case is covered above. The peek case is called from PrioritizedEventQueue::HasReadyEvent which is called from ThreadEventQueue::HasPendingEvent. 3) IdlePeriodState::SetPaused, because it sends an IPC message. This is only called from EnsureIsPaused, which is called from: - IdlePeriodState::GetIdleDeadlineInternal. Only in the !aIsPeek case. - IdlePeriodState::RanOutOfTasks called from: - PrioritizedEventQueue::GetEvent if we fell into the idle case and our queues are empty. - PrioritizedEventQueue::DidRunEvent if we are empty. 4) IdlePeriodState::ClearIdleToken because it sends an IPC message. This is called from: - IdlePeriodState::RanOutOfTasks; see SetPaused. - IdlePeriodState::GetIdleDeadlineInternal like EnsureIsPaused. - IdlePeriodState::GetIdleToken if token is in the past. This is only called from GetIdleDeadlineInternal, both cases. - IdlePeriodState::FlagNotIdle called from PrioritizedEventQueue::GetEvent if we find an event in a non-idle queue. Or rewriting in terms of API entrypoints on IdlePeriodState that might need to unlock: * Anything to do with getting deadlines, whether we are peeking or getting. Basically, if we need an updated deadline we need to unlock. * When we have detected we are completely out of tasks (idle or not) to run. Right now we do that when either we're asked for an event and don't have one or if we run an event and are empty after that (before unlocking!). But the unlocking or not happens in nsThreadEventQueue::DidRunEvent, so separately from the getting of the event. In particular, we are unlocked before we enter DidRunEvent, and unlock again before we return from it, so we can do whatever updates we want there. * When we have detected that we have a non-idle event to run; this calls FlagNotIdle. Differential Revision: https://phabricator.services.mozilla.com/D53631 --HG-- extra : moz-landing-system : lando
2019-11-22 17:06:17 +03:00
}
if (event) {
break;
}
// No runnable available. Sleep waiting for one if if we're supposed to.
// Otherwise just go ahead and return null.
if (!aMayWait) {
break;
}
Bug 1382922 - Refactor event queue to allow multiple implementations (r=erahm) This patch refactors the nsThread event queue to clean it up and to make it easier to restructure. The fundamental concepts are as follows: Each nsThread will have a pointer to a refcounted SynchronizedEventQueue. A SynchronizedEQ takes care of doing the locking and condition variable work when posting and popping events. For the actual storage of events, it delegates to an AbstractEventQueue data structure. It keeps a UniquePtr to the AbstractEventQueue that it uses for storage. Both SynchronizedEQ and AbstractEventQueue are abstract classes. There is only one concrete implementation of SynchronizedEQ in this patch, which is called ThreadEventQueue. ThreadEventQueue uses locks and condition variables to post and pop events the same way nsThread does. It also encapsulates the functionality that DOM workers need to implement their special event loops (PushEventQueue and PopEventQueue). In later Quantum DOM work, I plan to have another SynchronizedEQ implementation for the main thread, called SchedulerEventQueue. It will have special code for the cooperatively scheduling threads in Quantum DOM. There are two concrete implementations of AbstractEventQueue in this patch: EventQueue and PrioritizedEventQueue. EventQueue replaces the old nsEventQueue. The other AbstractEventQueue implementation is PrioritizedEventQueue, which uses multiple queues for different event priorities. The final major piece here is ThreadEventTarget, which splits some of the code for posting events out of nsThread. Eventually, my plan is for multiple cooperatively scheduled nsThreads to be able to share a ThreadEventTarget. In this patch, though, each nsThread has its own ThreadEventTarget. The class's purpose is just to collect some related code together. One final note: I tried to avoid virtual dispatch overhead as much as possible. Calls to SynchronizedEQ methods do use virtual dispatch, since I plan to use different implementations for different threads with Quantum DOM. But all the calls to EventQueue methods should be non-virtual. Although the methods are declared virtual, all the classes used are final and the concrete classes involved should all be known through templatization. MozReview-Commit-ID: 9Evtr9oIJvx
2017-06-21 05:42:13 +03:00
Bug 1597158 part 4. Stop unlocking the provided mutex in IdlePeriodState methods. r=smaug The basic idea, suggested by Olli, is that we can try to get a runnable in ThreadEventQueue::GetEvent, and if that does not produce anything unlock our mutex, do whatever idle state updates we need to do, re-lock our mutex. Then always we need to try getting a runnable again, because a non-idle runnable might have gotten queued while we had the lock unlocked. So we can't sleep on our mutex, in the mayWait case, unless we try to get a runnable again first. My notes on the current (pre this patch) unlocking setup follow. ------------------------------------------------------------ There are four places where we currently unlock: 1) IdlePeriodState::GetIdleDeadlineInternal. Needed only when !aIsPeek, to RequestIdleToken, which can do IPC. The only caller, via GetDeadlineForIdleTask, is PrioritizedEventQueue::GetEvent and only when we selected the idle or deferred queue. We need this to set the proper deadline on the idle event. In the cases when this unlock happens we currently _never_ return an idle event, because if we got here that means that we do not have an idle token. 2) IdlePeriodState::GetLocalIdleDeadline. Needs to unlock to get the idle period hint. The can get called from GetIdleDeadlineInternal in _both_ cases: peek and get. The callstack for the get case is covered above. The peek case is called from PrioritizedEventQueue::HasReadyEvent which is called from ThreadEventQueue::HasPendingEvent. 3) IdlePeriodState::SetPaused, because it sends an IPC message. This is only called from EnsureIsPaused, which is called from: - IdlePeriodState::GetIdleDeadlineInternal. Only in the !aIsPeek case. - IdlePeriodState::RanOutOfTasks called from: - PrioritizedEventQueue::GetEvent if we fell into the idle case and our queues are empty. - PrioritizedEventQueue::DidRunEvent if we are empty. 4) IdlePeriodState::ClearIdleToken because it sends an IPC message. This is called from: - IdlePeriodState::RanOutOfTasks; see SetPaused. - IdlePeriodState::GetIdleDeadlineInternal like EnsureIsPaused. - IdlePeriodState::GetIdleToken if token is in the past. This is only called from GetIdleDeadlineInternal, both cases. - IdlePeriodState::FlagNotIdle called from PrioritizedEventQueue::GetEvent if we find an event in a non-idle queue. Or rewriting in terms of API entrypoints on IdlePeriodState that might need to unlock: * Anything to do with getting deadlines, whether we are peeking or getting. Basically, if we need an updated deadline we need to unlock. * When we have detected we are completely out of tasks (idle or not) to run. Right now we do that when either we're asked for an event and don't have one or if we run an event and are empty after that (before unlocking!). But the unlocking or not happens in nsThreadEventQueue::DidRunEvent, so separately from the getting of the event. In particular, we are unlocked before we enter DidRunEvent, and unlock again before we return from it, so we can do whatever updates we want there. * When we have detected that we have a non-idle event to run; this calls FlagNotIdle. Differential Revision: https://phabricator.services.mozilla.com/D53631 --HG-- extra : moz-landing-system : lando
2019-11-22 17:06:17 +03:00
AUTO_PROFILER_LABEL("ThreadEventQueue::GetEvent::Wait", IDLE);
mEventsAvailable.Wait();
Bug 1382922 - Refactor event queue to allow multiple implementations (r=erahm) This patch refactors the nsThread event queue to clean it up and to make it easier to restructure. The fundamental concepts are as follows: Each nsThread will have a pointer to a refcounted SynchronizedEventQueue. A SynchronizedEQ takes care of doing the locking and condition variable work when posting and popping events. For the actual storage of events, it delegates to an AbstractEventQueue data structure. It keeps a UniquePtr to the AbstractEventQueue that it uses for storage. Both SynchronizedEQ and AbstractEventQueue are abstract classes. There is only one concrete implementation of SynchronizedEQ in this patch, which is called ThreadEventQueue. ThreadEventQueue uses locks and condition variables to post and pop events the same way nsThread does. It also encapsulates the functionality that DOM workers need to implement their special event loops (PushEventQueue and PopEventQueue). In later Quantum DOM work, I plan to have another SynchronizedEQ implementation for the main thread, called SchedulerEventQueue. It will have special code for the cooperatively scheduling threads in Quantum DOM. There are two concrete implementations of AbstractEventQueue in this patch: EventQueue and PrioritizedEventQueue. EventQueue replaces the old nsEventQueue. The other AbstractEventQueue implementation is PrioritizedEventQueue, which uses multiple queues for different event priorities. The final major piece here is ThreadEventTarget, which splits some of the code for posting events out of nsThread. Eventually, my plan is for multiple cooperatively scheduled nsThreads to be able to share a ThreadEventTarget. In this patch, though, each nsThread has its own ThreadEventTarget. The class's purpose is just to collect some related code together. One final note: I tried to avoid virtual dispatch overhead as much as possible. Calls to SynchronizedEQ methods do use virtual dispatch, since I plan to use different implementations for different threads with Quantum DOM. But all the calls to EventQueue methods should be non-virtual. Although the methods are declared virtual, all the classes used are final and the concrete classes involved should all be known through templatization. MozReview-Commit-ID: 9Evtr9oIJvx
2017-06-21 05:42:13 +03:00
}
Bug 1597158 part 4. Stop unlocking the provided mutex in IdlePeriodState methods. r=smaug The basic idea, suggested by Olli, is that we can try to get a runnable in ThreadEventQueue::GetEvent, and if that does not produce anything unlock our mutex, do whatever idle state updates we need to do, re-lock our mutex. Then always we need to try getting a runnable again, because a non-idle runnable might have gotten queued while we had the lock unlocked. So we can't sleep on our mutex, in the mayWait case, unless we try to get a runnable again first. My notes on the current (pre this patch) unlocking setup follow. ------------------------------------------------------------ There are four places where we currently unlock: 1) IdlePeriodState::GetIdleDeadlineInternal. Needed only when !aIsPeek, to RequestIdleToken, which can do IPC. The only caller, via GetDeadlineForIdleTask, is PrioritizedEventQueue::GetEvent and only when we selected the idle or deferred queue. We need this to set the proper deadline on the idle event. In the cases when this unlock happens we currently _never_ return an idle event, because if we got here that means that we do not have an idle token. 2) IdlePeriodState::GetLocalIdleDeadline. Needs to unlock to get the idle period hint. The can get called from GetIdleDeadlineInternal in _both_ cases: peek and get. The callstack for the get case is covered above. The peek case is called from PrioritizedEventQueue::HasReadyEvent which is called from ThreadEventQueue::HasPendingEvent. 3) IdlePeriodState::SetPaused, because it sends an IPC message. This is only called from EnsureIsPaused, which is called from: - IdlePeriodState::GetIdleDeadlineInternal. Only in the !aIsPeek case. - IdlePeriodState::RanOutOfTasks called from: - PrioritizedEventQueue::GetEvent if we fell into the idle case and our queues are empty. - PrioritizedEventQueue::DidRunEvent if we are empty. 4) IdlePeriodState::ClearIdleToken because it sends an IPC message. This is called from: - IdlePeriodState::RanOutOfTasks; see SetPaused. - IdlePeriodState::GetIdleDeadlineInternal like EnsureIsPaused. - IdlePeriodState::GetIdleToken if token is in the past. This is only called from GetIdleDeadlineInternal, both cases. - IdlePeriodState::FlagNotIdle called from PrioritizedEventQueue::GetEvent if we find an event in a non-idle queue. Or rewriting in terms of API entrypoints on IdlePeriodState that might need to unlock: * Anything to do with getting deadlines, whether we are peeking or getting. Basically, if we need an updated deadline we need to unlock. * When we have detected we are completely out of tasks (idle or not) to run. Right now we do that when either we're asked for an event and don't have one or if we run an event and are empty after that (before unlocking!). But the unlocking or not happens in nsThreadEventQueue::DidRunEvent, so separately from the getting of the event. In particular, we are unlocked before we enter DidRunEvent, and unlock again before we return from it, so we can do whatever updates we want there. * When we have detected that we have a non-idle event to run; this calls FlagNotIdle. Differential Revision: https://phabricator.services.mozilla.com/D53631 --HG-- extra : moz-landing-system : lando
2019-11-22 17:06:17 +03:00
}
Bug 1382922 - Refactor event queue to allow multiple implementations (r=erahm) This patch refactors the nsThread event queue to clean it up and to make it easier to restructure. The fundamental concepts are as follows: Each nsThread will have a pointer to a refcounted SynchronizedEventQueue. A SynchronizedEQ takes care of doing the locking and condition variable work when posting and popping events. For the actual storage of events, it delegates to an AbstractEventQueue data structure. It keeps a UniquePtr to the AbstractEventQueue that it uses for storage. Both SynchronizedEQ and AbstractEventQueue are abstract classes. There is only one concrete implementation of SynchronizedEQ in this patch, which is called ThreadEventQueue. ThreadEventQueue uses locks and condition variables to post and pop events the same way nsThread does. It also encapsulates the functionality that DOM workers need to implement their special event loops (PushEventQueue and PopEventQueue). In later Quantum DOM work, I plan to have another SynchronizedEQ implementation for the main thread, called SchedulerEventQueue. It will have special code for the cooperatively scheduling threads in Quantum DOM. There are two concrete implementations of AbstractEventQueue in this patch: EventQueue and PrioritizedEventQueue. EventQueue replaces the old nsEventQueue. The other AbstractEventQueue implementation is PrioritizedEventQueue, which uses multiple queues for different event priorities. The final major piece here is ThreadEventTarget, which splits some of the code for posting events out of nsThread. Eventually, my plan is for multiple cooperatively scheduled nsThreads to be able to share a ThreadEventTarget. In this patch, though, each nsThread has its own ThreadEventTarget. The class's purpose is just to collect some related code together. One final note: I tried to avoid virtual dispatch overhead as much as possible. Calls to SynchronizedEQ methods do use virtual dispatch, since I plan to use different implementations for different threads with Quantum DOM. But all the calls to EventQueue methods should be non-virtual. Although the methods are declared virtual, all the classes used are final and the concrete classes involved should all be known through templatization. MozReview-Commit-ID: 9Evtr9oIJvx
2017-06-21 05:42:13 +03:00
return event.forget();
}
bool ThreadEventQueue::HasPendingEvent() {
Bug 1382922 - Refactor event queue to allow multiple implementations (r=erahm) This patch refactors the nsThread event queue to clean it up and to make it easier to restructure. The fundamental concepts are as follows: Each nsThread will have a pointer to a refcounted SynchronizedEventQueue. A SynchronizedEQ takes care of doing the locking and condition variable work when posting and popping events. For the actual storage of events, it delegates to an AbstractEventQueue data structure. It keeps a UniquePtr to the AbstractEventQueue that it uses for storage. Both SynchronizedEQ and AbstractEventQueue are abstract classes. There is only one concrete implementation of SynchronizedEQ in this patch, which is called ThreadEventQueue. ThreadEventQueue uses locks and condition variables to post and pop events the same way nsThread does. It also encapsulates the functionality that DOM workers need to implement their special event loops (PushEventQueue and PopEventQueue). In later Quantum DOM work, I plan to have another SynchronizedEQ implementation for the main thread, called SchedulerEventQueue. It will have special code for the cooperatively scheduling threads in Quantum DOM. There are two concrete implementations of AbstractEventQueue in this patch: EventQueue and PrioritizedEventQueue. EventQueue replaces the old nsEventQueue. The other AbstractEventQueue implementation is PrioritizedEventQueue, which uses multiple queues for different event priorities. The final major piece here is ThreadEventTarget, which splits some of the code for posting events out of nsThread. Eventually, my plan is for multiple cooperatively scheduled nsThreads to be able to share a ThreadEventTarget. In this patch, though, each nsThread has its own ThreadEventTarget. The class's purpose is just to collect some related code together. One final note: I tried to avoid virtual dispatch overhead as much as possible. Calls to SynchronizedEQ methods do use virtual dispatch, since I plan to use different implementations for different threads with Quantum DOM. But all the calls to EventQueue methods should be non-virtual. Although the methods are declared virtual, all the classes used are final and the concrete classes involved should all be known through templatization. MozReview-Commit-ID: 9Evtr9oIJvx
2017-06-21 05:42:13 +03:00
MutexAutoLock lock(mLock);
// We always get events from the topmost queue when there are nested queues.
if (mNestedQueues.IsEmpty()) {
return mBaseQueue->HasReadyEvent(lock);
Bug 1382922 - Refactor event queue to allow multiple implementations (r=erahm) This patch refactors the nsThread event queue to clean it up and to make it easier to restructure. The fundamental concepts are as follows: Each nsThread will have a pointer to a refcounted SynchronizedEventQueue. A SynchronizedEQ takes care of doing the locking and condition variable work when posting and popping events. For the actual storage of events, it delegates to an AbstractEventQueue data structure. It keeps a UniquePtr to the AbstractEventQueue that it uses for storage. Both SynchronizedEQ and AbstractEventQueue are abstract classes. There is only one concrete implementation of SynchronizedEQ in this patch, which is called ThreadEventQueue. ThreadEventQueue uses locks and condition variables to post and pop events the same way nsThread does. It also encapsulates the functionality that DOM workers need to implement their special event loops (PushEventQueue and PopEventQueue). In later Quantum DOM work, I plan to have another SynchronizedEQ implementation for the main thread, called SchedulerEventQueue. It will have special code for the cooperatively scheduling threads in Quantum DOM. There are two concrete implementations of AbstractEventQueue in this patch: EventQueue and PrioritizedEventQueue. EventQueue replaces the old nsEventQueue. The other AbstractEventQueue implementation is PrioritizedEventQueue, which uses multiple queues for different event priorities. The final major piece here is ThreadEventTarget, which splits some of the code for posting events out of nsThread. Eventually, my plan is for multiple cooperatively scheduled nsThreads to be able to share a ThreadEventTarget. In this patch, though, each nsThread has its own ThreadEventTarget. The class's purpose is just to collect some related code together. One final note: I tried to avoid virtual dispatch overhead as much as possible. Calls to SynchronizedEQ methods do use virtual dispatch, since I plan to use different implementations for different threads with Quantum DOM. But all the calls to EventQueue methods should be non-virtual. Although the methods are declared virtual, all the classes used are final and the concrete classes involved should all be known through templatization. MozReview-Commit-ID: 9Evtr9oIJvx
2017-06-21 05:42:13 +03:00
} else {
return mNestedQueues.LastElement().mQueue->HasReadyEvent(lock);
Bug 1382922 - Refactor event queue to allow multiple implementations (r=erahm) This patch refactors the nsThread event queue to clean it up and to make it easier to restructure. The fundamental concepts are as follows: Each nsThread will have a pointer to a refcounted SynchronizedEventQueue. A SynchronizedEQ takes care of doing the locking and condition variable work when posting and popping events. For the actual storage of events, it delegates to an AbstractEventQueue data structure. It keeps a UniquePtr to the AbstractEventQueue that it uses for storage. Both SynchronizedEQ and AbstractEventQueue are abstract classes. There is only one concrete implementation of SynchronizedEQ in this patch, which is called ThreadEventQueue. ThreadEventQueue uses locks and condition variables to post and pop events the same way nsThread does. It also encapsulates the functionality that DOM workers need to implement their special event loops (PushEventQueue and PopEventQueue). In later Quantum DOM work, I plan to have another SynchronizedEQ implementation for the main thread, called SchedulerEventQueue. It will have special code for the cooperatively scheduling threads in Quantum DOM. There are two concrete implementations of AbstractEventQueue in this patch: EventQueue and PrioritizedEventQueue. EventQueue replaces the old nsEventQueue. The other AbstractEventQueue implementation is PrioritizedEventQueue, which uses multiple queues for different event priorities. The final major piece here is ThreadEventTarget, which splits some of the code for posting events out of nsThread. Eventually, my plan is for multiple cooperatively scheduled nsThreads to be able to share a ThreadEventTarget. In this patch, though, each nsThread has its own ThreadEventTarget. The class's purpose is just to collect some related code together. One final note: I tried to avoid virtual dispatch overhead as much as possible. Calls to SynchronizedEQ methods do use virtual dispatch, since I plan to use different implementations for different threads with Quantum DOM. But all the calls to EventQueue methods should be non-virtual. Although the methods are declared virtual, all the classes used are final and the concrete classes involved should all be known through templatization. MozReview-Commit-ID: 9Evtr9oIJvx
2017-06-21 05:42:13 +03:00
}
}
bool ThreadEventQueue::ShutdownIfNoPendingEvents() {
Bug 1382922 - Refactor event queue to allow multiple implementations (r=erahm) This patch refactors the nsThread event queue to clean it up and to make it easier to restructure. The fundamental concepts are as follows: Each nsThread will have a pointer to a refcounted SynchronizedEventQueue. A SynchronizedEQ takes care of doing the locking and condition variable work when posting and popping events. For the actual storage of events, it delegates to an AbstractEventQueue data structure. It keeps a UniquePtr to the AbstractEventQueue that it uses for storage. Both SynchronizedEQ and AbstractEventQueue are abstract classes. There is only one concrete implementation of SynchronizedEQ in this patch, which is called ThreadEventQueue. ThreadEventQueue uses locks and condition variables to post and pop events the same way nsThread does. It also encapsulates the functionality that DOM workers need to implement their special event loops (PushEventQueue and PopEventQueue). In later Quantum DOM work, I plan to have another SynchronizedEQ implementation for the main thread, called SchedulerEventQueue. It will have special code for the cooperatively scheduling threads in Quantum DOM. There are two concrete implementations of AbstractEventQueue in this patch: EventQueue and PrioritizedEventQueue. EventQueue replaces the old nsEventQueue. The other AbstractEventQueue implementation is PrioritizedEventQueue, which uses multiple queues for different event priorities. The final major piece here is ThreadEventTarget, which splits some of the code for posting events out of nsThread. Eventually, my plan is for multiple cooperatively scheduled nsThreads to be able to share a ThreadEventTarget. In this patch, though, each nsThread has its own ThreadEventTarget. The class's purpose is just to collect some related code together. One final note: I tried to avoid virtual dispatch overhead as much as possible. Calls to SynchronizedEQ methods do use virtual dispatch, since I plan to use different implementations for different threads with Quantum DOM. But all the calls to EventQueue methods should be non-virtual. Although the methods are declared virtual, all the classes used are final and the concrete classes involved should all be known through templatization. MozReview-Commit-ID: 9Evtr9oIJvx
2017-06-21 05:42:13 +03:00
MutexAutoLock lock(mLock);
if (mNestedQueues.IsEmpty() && mBaseQueue->IsEmpty(lock)) {
Bug 1382922 - Refactor event queue to allow multiple implementations (r=erahm) This patch refactors the nsThread event queue to clean it up and to make it easier to restructure. The fundamental concepts are as follows: Each nsThread will have a pointer to a refcounted SynchronizedEventQueue. A SynchronizedEQ takes care of doing the locking and condition variable work when posting and popping events. For the actual storage of events, it delegates to an AbstractEventQueue data structure. It keeps a UniquePtr to the AbstractEventQueue that it uses for storage. Both SynchronizedEQ and AbstractEventQueue are abstract classes. There is only one concrete implementation of SynchronizedEQ in this patch, which is called ThreadEventQueue. ThreadEventQueue uses locks and condition variables to post and pop events the same way nsThread does. It also encapsulates the functionality that DOM workers need to implement their special event loops (PushEventQueue and PopEventQueue). In later Quantum DOM work, I plan to have another SynchronizedEQ implementation for the main thread, called SchedulerEventQueue. It will have special code for the cooperatively scheduling threads in Quantum DOM. There are two concrete implementations of AbstractEventQueue in this patch: EventQueue and PrioritizedEventQueue. EventQueue replaces the old nsEventQueue. The other AbstractEventQueue implementation is PrioritizedEventQueue, which uses multiple queues for different event priorities. The final major piece here is ThreadEventTarget, which splits some of the code for posting events out of nsThread. Eventually, my plan is for multiple cooperatively scheduled nsThreads to be able to share a ThreadEventTarget. In this patch, though, each nsThread has its own ThreadEventTarget. The class's purpose is just to collect some related code together. One final note: I tried to avoid virtual dispatch overhead as much as possible. Calls to SynchronizedEQ methods do use virtual dispatch, since I plan to use different implementations for different threads with Quantum DOM. But all the calls to EventQueue methods should be non-virtual. Although the methods are declared virtual, all the classes used are final and the concrete classes involved should all be known through templatization. MozReview-Commit-ID: 9Evtr9oIJvx
2017-06-21 05:42:13 +03:00
mEventsAreDoomed = true;
return true;
}
return false;
}
already_AddRefed<nsISerialEventTarget> ThreadEventQueue::PushEventQueue() {
Bug 1382922 - Refactor event queue to allow multiple implementations (r=erahm) This patch refactors the nsThread event queue to clean it up and to make it easier to restructure. The fundamental concepts are as follows: Each nsThread will have a pointer to a refcounted SynchronizedEventQueue. A SynchronizedEQ takes care of doing the locking and condition variable work when posting and popping events. For the actual storage of events, it delegates to an AbstractEventQueue data structure. It keeps a UniquePtr to the AbstractEventQueue that it uses for storage. Both SynchronizedEQ and AbstractEventQueue are abstract classes. There is only one concrete implementation of SynchronizedEQ in this patch, which is called ThreadEventQueue. ThreadEventQueue uses locks and condition variables to post and pop events the same way nsThread does. It also encapsulates the functionality that DOM workers need to implement their special event loops (PushEventQueue and PopEventQueue). In later Quantum DOM work, I plan to have another SynchronizedEQ implementation for the main thread, called SchedulerEventQueue. It will have special code for the cooperatively scheduling threads in Quantum DOM. There are two concrete implementations of AbstractEventQueue in this patch: EventQueue and PrioritizedEventQueue. EventQueue replaces the old nsEventQueue. The other AbstractEventQueue implementation is PrioritizedEventQueue, which uses multiple queues for different event priorities. The final major piece here is ThreadEventTarget, which splits some of the code for posting events out of nsThread. Eventually, my plan is for multiple cooperatively scheduled nsThreads to be able to share a ThreadEventTarget. In this patch, though, each nsThread has its own ThreadEventTarget. The class's purpose is just to collect some related code together. One final note: I tried to avoid virtual dispatch overhead as much as possible. Calls to SynchronizedEQ methods do use virtual dispatch, since I plan to use different implementations for different threads with Quantum DOM. But all the calls to EventQueue methods should be non-virtual. Although the methods are declared virtual, all the classes used are final and the concrete classes involved should all be known through templatization. MozReview-Commit-ID: 9Evtr9oIJvx
2017-06-21 05:42:13 +03:00
auto queue = MakeUnique<EventQueue>();
RefPtr<NestedSink> sink = new NestedSink(queue.get(), this);
RefPtr<ThreadEventTarget> eventTarget =
new ThreadEventTarget(sink, NS_IsMainThread());
MutexAutoLock lock(mLock);
mNestedQueues.AppendElement(NestedQueueItem(std::move(queue), eventTarget));
Bug 1382922 - Refactor event queue to allow multiple implementations (r=erahm) This patch refactors the nsThread event queue to clean it up and to make it easier to restructure. The fundamental concepts are as follows: Each nsThread will have a pointer to a refcounted SynchronizedEventQueue. A SynchronizedEQ takes care of doing the locking and condition variable work when posting and popping events. For the actual storage of events, it delegates to an AbstractEventQueue data structure. It keeps a UniquePtr to the AbstractEventQueue that it uses for storage. Both SynchronizedEQ and AbstractEventQueue are abstract classes. There is only one concrete implementation of SynchronizedEQ in this patch, which is called ThreadEventQueue. ThreadEventQueue uses locks and condition variables to post and pop events the same way nsThread does. It also encapsulates the functionality that DOM workers need to implement their special event loops (PushEventQueue and PopEventQueue). In later Quantum DOM work, I plan to have another SynchronizedEQ implementation for the main thread, called SchedulerEventQueue. It will have special code for the cooperatively scheduling threads in Quantum DOM. There are two concrete implementations of AbstractEventQueue in this patch: EventQueue and PrioritizedEventQueue. EventQueue replaces the old nsEventQueue. The other AbstractEventQueue implementation is PrioritizedEventQueue, which uses multiple queues for different event priorities. The final major piece here is ThreadEventTarget, which splits some of the code for posting events out of nsThread. Eventually, my plan is for multiple cooperatively scheduled nsThreads to be able to share a ThreadEventTarget. In this patch, though, each nsThread has its own ThreadEventTarget. The class's purpose is just to collect some related code together. One final note: I tried to avoid virtual dispatch overhead as much as possible. Calls to SynchronizedEQ methods do use virtual dispatch, since I plan to use different implementations for different threads with Quantum DOM. But all the calls to EventQueue methods should be non-virtual. Although the methods are declared virtual, all the classes used are final and the concrete classes involved should all be known through templatization. MozReview-Commit-ID: 9Evtr9oIJvx
2017-06-21 05:42:13 +03:00
return eventTarget.forget();
}
void ThreadEventQueue::PopEventQueue(nsIEventTarget* aTarget) {
Bug 1382922 - Refactor event queue to allow multiple implementations (r=erahm) This patch refactors the nsThread event queue to clean it up and to make it easier to restructure. The fundamental concepts are as follows: Each nsThread will have a pointer to a refcounted SynchronizedEventQueue. A SynchronizedEQ takes care of doing the locking and condition variable work when posting and popping events. For the actual storage of events, it delegates to an AbstractEventQueue data structure. It keeps a UniquePtr to the AbstractEventQueue that it uses for storage. Both SynchronizedEQ and AbstractEventQueue are abstract classes. There is only one concrete implementation of SynchronizedEQ in this patch, which is called ThreadEventQueue. ThreadEventQueue uses locks and condition variables to post and pop events the same way nsThread does. It also encapsulates the functionality that DOM workers need to implement their special event loops (PushEventQueue and PopEventQueue). In later Quantum DOM work, I plan to have another SynchronizedEQ implementation for the main thread, called SchedulerEventQueue. It will have special code for the cooperatively scheduling threads in Quantum DOM. There are two concrete implementations of AbstractEventQueue in this patch: EventQueue and PrioritizedEventQueue. EventQueue replaces the old nsEventQueue. The other AbstractEventQueue implementation is PrioritizedEventQueue, which uses multiple queues for different event priorities. The final major piece here is ThreadEventTarget, which splits some of the code for posting events out of nsThread. Eventually, my plan is for multiple cooperatively scheduled nsThreads to be able to share a ThreadEventTarget. In this patch, though, each nsThread has its own ThreadEventTarget. The class's purpose is just to collect some related code together. One final note: I tried to avoid virtual dispatch overhead as much as possible. Calls to SynchronizedEQ methods do use virtual dispatch, since I plan to use different implementations for different threads with Quantum DOM. But all the calls to EventQueue methods should be non-virtual. Although the methods are declared virtual, all the classes used are final and the concrete classes involved should all be known through templatization. MozReview-Commit-ID: 9Evtr9oIJvx
2017-06-21 05:42:13 +03:00
MutexAutoLock lock(mLock);
MOZ_ASSERT(!mNestedQueues.IsEmpty());
NestedQueueItem& item = mNestedQueues.LastElement();
MOZ_ASSERT(aTarget == item.mEventTarget);
// Disconnect the event target that will be popped.
item.mEventTarget->Disconnect(lock);
EventQueue* prevQueue =
Bug 1382922 - Refactor event queue to allow multiple implementations (r=erahm) This patch refactors the nsThread event queue to clean it up and to make it easier to restructure. The fundamental concepts are as follows: Each nsThread will have a pointer to a refcounted SynchronizedEventQueue. A SynchronizedEQ takes care of doing the locking and condition variable work when posting and popping events. For the actual storage of events, it delegates to an AbstractEventQueue data structure. It keeps a UniquePtr to the AbstractEventQueue that it uses for storage. Both SynchronizedEQ and AbstractEventQueue are abstract classes. There is only one concrete implementation of SynchronizedEQ in this patch, which is called ThreadEventQueue. ThreadEventQueue uses locks and condition variables to post and pop events the same way nsThread does. It also encapsulates the functionality that DOM workers need to implement their special event loops (PushEventQueue and PopEventQueue). In later Quantum DOM work, I plan to have another SynchronizedEQ implementation for the main thread, called SchedulerEventQueue. It will have special code for the cooperatively scheduling threads in Quantum DOM. There are two concrete implementations of AbstractEventQueue in this patch: EventQueue and PrioritizedEventQueue. EventQueue replaces the old nsEventQueue. The other AbstractEventQueue implementation is PrioritizedEventQueue, which uses multiple queues for different event priorities. The final major piece here is ThreadEventTarget, which splits some of the code for posting events out of nsThread. Eventually, my plan is for multiple cooperatively scheduled nsThreads to be able to share a ThreadEventTarget. In this patch, though, each nsThread has its own ThreadEventTarget. The class's purpose is just to collect some related code together. One final note: I tried to avoid virtual dispatch overhead as much as possible. Calls to SynchronizedEQ methods do use virtual dispatch, since I plan to use different implementations for different threads with Quantum DOM. But all the calls to EventQueue methods should be non-virtual. Although the methods are declared virtual, all the classes used are final and the concrete classes involved should all be known through templatization. MozReview-Commit-ID: 9Evtr9oIJvx
2017-06-21 05:42:13 +03:00
mNestedQueues.Length() == 1
? mBaseQueue.get()
: mNestedQueues[mNestedQueues.Length() - 2].mQueue.get();
Bug 1382922 - Refactor event queue to allow multiple implementations (r=erahm) This patch refactors the nsThread event queue to clean it up and to make it easier to restructure. The fundamental concepts are as follows: Each nsThread will have a pointer to a refcounted SynchronizedEventQueue. A SynchronizedEQ takes care of doing the locking and condition variable work when posting and popping events. For the actual storage of events, it delegates to an AbstractEventQueue data structure. It keeps a UniquePtr to the AbstractEventQueue that it uses for storage. Both SynchronizedEQ and AbstractEventQueue are abstract classes. There is only one concrete implementation of SynchronizedEQ in this patch, which is called ThreadEventQueue. ThreadEventQueue uses locks and condition variables to post and pop events the same way nsThread does. It also encapsulates the functionality that DOM workers need to implement their special event loops (PushEventQueue and PopEventQueue). In later Quantum DOM work, I plan to have another SynchronizedEQ implementation for the main thread, called SchedulerEventQueue. It will have special code for the cooperatively scheduling threads in Quantum DOM. There are two concrete implementations of AbstractEventQueue in this patch: EventQueue and PrioritizedEventQueue. EventQueue replaces the old nsEventQueue. The other AbstractEventQueue implementation is PrioritizedEventQueue, which uses multiple queues for different event priorities. The final major piece here is ThreadEventTarget, which splits some of the code for posting events out of nsThread. Eventually, my plan is for multiple cooperatively scheduled nsThreads to be able to share a ThreadEventTarget. In this patch, though, each nsThread has its own ThreadEventTarget. The class's purpose is just to collect some related code together. One final note: I tried to avoid virtual dispatch overhead as much as possible. Calls to SynchronizedEQ methods do use virtual dispatch, since I plan to use different implementations for different threads with Quantum DOM. But all the calls to EventQueue methods should be non-virtual. Although the methods are declared virtual, all the classes used are final and the concrete classes involved should all be known through templatization. MozReview-Commit-ID: 9Evtr9oIJvx
2017-06-21 05:42:13 +03:00
// Move events from the old queue to the new one.
nsCOMPtr<nsIRunnable> event;
TimeDuration delay;
while ((event = item.mQueue->GetEvent(lock, &delay))) {
// preserve the event delay so far
prevQueue->PutEvent(event.forget(), EventQueuePriority::Normal, lock,
&delay);
Bug 1382922 - Refactor event queue to allow multiple implementations (r=erahm) This patch refactors the nsThread event queue to clean it up and to make it easier to restructure. The fundamental concepts are as follows: Each nsThread will have a pointer to a refcounted SynchronizedEventQueue. A SynchronizedEQ takes care of doing the locking and condition variable work when posting and popping events. For the actual storage of events, it delegates to an AbstractEventQueue data structure. It keeps a UniquePtr to the AbstractEventQueue that it uses for storage. Both SynchronizedEQ and AbstractEventQueue are abstract classes. There is only one concrete implementation of SynchronizedEQ in this patch, which is called ThreadEventQueue. ThreadEventQueue uses locks and condition variables to post and pop events the same way nsThread does. It also encapsulates the functionality that DOM workers need to implement their special event loops (PushEventQueue and PopEventQueue). In later Quantum DOM work, I plan to have another SynchronizedEQ implementation for the main thread, called SchedulerEventQueue. It will have special code for the cooperatively scheduling threads in Quantum DOM. There are two concrete implementations of AbstractEventQueue in this patch: EventQueue and PrioritizedEventQueue. EventQueue replaces the old nsEventQueue. The other AbstractEventQueue implementation is PrioritizedEventQueue, which uses multiple queues for different event priorities. The final major piece here is ThreadEventTarget, which splits some of the code for posting events out of nsThread. Eventually, my plan is for multiple cooperatively scheduled nsThreads to be able to share a ThreadEventTarget. In this patch, though, each nsThread has its own ThreadEventTarget. The class's purpose is just to collect some related code together. One final note: I tried to avoid virtual dispatch overhead as much as possible. Calls to SynchronizedEQ methods do use virtual dispatch, since I plan to use different implementations for different threads with Quantum DOM. But all the calls to EventQueue methods should be non-virtual. Although the methods are declared virtual, all the classes used are final and the concrete classes involved should all be known through templatization. MozReview-Commit-ID: 9Evtr9oIJvx
2017-06-21 05:42:13 +03:00
}
mNestedQueues.RemoveLastElement();
Bug 1382922 - Refactor event queue to allow multiple implementations (r=erahm) This patch refactors the nsThread event queue to clean it up and to make it easier to restructure. The fundamental concepts are as follows: Each nsThread will have a pointer to a refcounted SynchronizedEventQueue. A SynchronizedEQ takes care of doing the locking and condition variable work when posting and popping events. For the actual storage of events, it delegates to an AbstractEventQueue data structure. It keeps a UniquePtr to the AbstractEventQueue that it uses for storage. Both SynchronizedEQ and AbstractEventQueue are abstract classes. There is only one concrete implementation of SynchronizedEQ in this patch, which is called ThreadEventQueue. ThreadEventQueue uses locks and condition variables to post and pop events the same way nsThread does. It also encapsulates the functionality that DOM workers need to implement their special event loops (PushEventQueue and PopEventQueue). In later Quantum DOM work, I plan to have another SynchronizedEQ implementation for the main thread, called SchedulerEventQueue. It will have special code for the cooperatively scheduling threads in Quantum DOM. There are two concrete implementations of AbstractEventQueue in this patch: EventQueue and PrioritizedEventQueue. EventQueue replaces the old nsEventQueue. The other AbstractEventQueue implementation is PrioritizedEventQueue, which uses multiple queues for different event priorities. The final major piece here is ThreadEventTarget, which splits some of the code for posting events out of nsThread. Eventually, my plan is for multiple cooperatively scheduled nsThreads to be able to share a ThreadEventTarget. In this patch, though, each nsThread has its own ThreadEventTarget. The class's purpose is just to collect some related code together. One final note: I tried to avoid virtual dispatch overhead as much as possible. Calls to SynchronizedEQ methods do use virtual dispatch, since I plan to use different implementations for different threads with Quantum DOM. But all the calls to EventQueue methods should be non-virtual. Although the methods are declared virtual, all the classes used are final and the concrete classes involved should all be known through templatization. MozReview-Commit-ID: 9Evtr9oIJvx
2017-06-21 05:42:13 +03:00
}
size_t ThreadEventQueue::SizeOfExcludingThis(
mozilla::MallocSizeOf aMallocSizeOf) const {
size_t n = 0;
n += mBaseQueue->SizeOfIncludingThis(aMallocSizeOf);
n += mNestedQueues.ShallowSizeOfExcludingThis(aMallocSizeOf);
for (auto& queue : mNestedQueues) {
n += queue.mEventTarget->SizeOfIncludingThis(aMallocSizeOf);
}
return SynchronizedEventQueue::SizeOfExcludingThis(aMallocSizeOf) + n;
}
already_AddRefed<nsIThreadObserver> ThreadEventQueue::GetObserver() {
Bug 1382922 - Refactor event queue to allow multiple implementations (r=erahm) This patch refactors the nsThread event queue to clean it up and to make it easier to restructure. The fundamental concepts are as follows: Each nsThread will have a pointer to a refcounted SynchronizedEventQueue. A SynchronizedEQ takes care of doing the locking and condition variable work when posting and popping events. For the actual storage of events, it delegates to an AbstractEventQueue data structure. It keeps a UniquePtr to the AbstractEventQueue that it uses for storage. Both SynchronizedEQ and AbstractEventQueue are abstract classes. There is only one concrete implementation of SynchronizedEQ in this patch, which is called ThreadEventQueue. ThreadEventQueue uses locks and condition variables to post and pop events the same way nsThread does. It also encapsulates the functionality that DOM workers need to implement their special event loops (PushEventQueue and PopEventQueue). In later Quantum DOM work, I plan to have another SynchronizedEQ implementation for the main thread, called SchedulerEventQueue. It will have special code for the cooperatively scheduling threads in Quantum DOM. There are two concrete implementations of AbstractEventQueue in this patch: EventQueue and PrioritizedEventQueue. EventQueue replaces the old nsEventQueue. The other AbstractEventQueue implementation is PrioritizedEventQueue, which uses multiple queues for different event priorities. The final major piece here is ThreadEventTarget, which splits some of the code for posting events out of nsThread. Eventually, my plan is for multiple cooperatively scheduled nsThreads to be able to share a ThreadEventTarget. In this patch, though, each nsThread has its own ThreadEventTarget. The class's purpose is just to collect some related code together. One final note: I tried to avoid virtual dispatch overhead as much as possible. Calls to SynchronizedEQ methods do use virtual dispatch, since I plan to use different implementations for different threads with Quantum DOM. But all the calls to EventQueue methods should be non-virtual. Although the methods are declared virtual, all the classes used are final and the concrete classes involved should all be known through templatization. MozReview-Commit-ID: 9Evtr9oIJvx
2017-06-21 05:42:13 +03:00
MutexAutoLock lock(mLock);
return do_AddRef(mObserver);
Bug 1382922 - Refactor event queue to allow multiple implementations (r=erahm) This patch refactors the nsThread event queue to clean it up and to make it easier to restructure. The fundamental concepts are as follows: Each nsThread will have a pointer to a refcounted SynchronizedEventQueue. A SynchronizedEQ takes care of doing the locking and condition variable work when posting and popping events. For the actual storage of events, it delegates to an AbstractEventQueue data structure. It keeps a UniquePtr to the AbstractEventQueue that it uses for storage. Both SynchronizedEQ and AbstractEventQueue are abstract classes. There is only one concrete implementation of SynchronizedEQ in this patch, which is called ThreadEventQueue. ThreadEventQueue uses locks and condition variables to post and pop events the same way nsThread does. It also encapsulates the functionality that DOM workers need to implement their special event loops (PushEventQueue and PopEventQueue). In later Quantum DOM work, I plan to have another SynchronizedEQ implementation for the main thread, called SchedulerEventQueue. It will have special code for the cooperatively scheduling threads in Quantum DOM. There are two concrete implementations of AbstractEventQueue in this patch: EventQueue and PrioritizedEventQueue. EventQueue replaces the old nsEventQueue. The other AbstractEventQueue implementation is PrioritizedEventQueue, which uses multiple queues for different event priorities. The final major piece here is ThreadEventTarget, which splits some of the code for posting events out of nsThread. Eventually, my plan is for multiple cooperatively scheduled nsThreads to be able to share a ThreadEventTarget. In this patch, though, each nsThread has its own ThreadEventTarget. The class's purpose is just to collect some related code together. One final note: I tried to avoid virtual dispatch overhead as much as possible. Calls to SynchronizedEQ methods do use virtual dispatch, since I plan to use different implementations for different threads with Quantum DOM. But all the calls to EventQueue methods should be non-virtual. Although the methods are declared virtual, all the classes used are final and the concrete classes involved should all be known through templatization. MozReview-Commit-ID: 9Evtr9oIJvx
2017-06-21 05:42:13 +03:00
}
already_AddRefed<nsIThreadObserver> ThreadEventQueue::GetObserverOnThread() {
return do_AddRef(mObserver);
Bug 1382922 - Refactor event queue to allow multiple implementations (r=erahm) This patch refactors the nsThread event queue to clean it up and to make it easier to restructure. The fundamental concepts are as follows: Each nsThread will have a pointer to a refcounted SynchronizedEventQueue. A SynchronizedEQ takes care of doing the locking and condition variable work when posting and popping events. For the actual storage of events, it delegates to an AbstractEventQueue data structure. It keeps a UniquePtr to the AbstractEventQueue that it uses for storage. Both SynchronizedEQ and AbstractEventQueue are abstract classes. There is only one concrete implementation of SynchronizedEQ in this patch, which is called ThreadEventQueue. ThreadEventQueue uses locks and condition variables to post and pop events the same way nsThread does. It also encapsulates the functionality that DOM workers need to implement their special event loops (PushEventQueue and PopEventQueue). In later Quantum DOM work, I plan to have another SynchronizedEQ implementation for the main thread, called SchedulerEventQueue. It will have special code for the cooperatively scheduling threads in Quantum DOM. There are two concrete implementations of AbstractEventQueue in this patch: EventQueue and PrioritizedEventQueue. EventQueue replaces the old nsEventQueue. The other AbstractEventQueue implementation is PrioritizedEventQueue, which uses multiple queues for different event priorities. The final major piece here is ThreadEventTarget, which splits some of the code for posting events out of nsThread. Eventually, my plan is for multiple cooperatively scheduled nsThreads to be able to share a ThreadEventTarget. In this patch, though, each nsThread has its own ThreadEventTarget. The class's purpose is just to collect some related code together. One final note: I tried to avoid virtual dispatch overhead as much as possible. Calls to SynchronizedEQ methods do use virtual dispatch, since I plan to use different implementations for different threads with Quantum DOM. But all the calls to EventQueue methods should be non-virtual. Although the methods are declared virtual, all the classes used are final and the concrete classes involved should all be known through templatization. MozReview-Commit-ID: 9Evtr9oIJvx
2017-06-21 05:42:13 +03:00
}
void ThreadEventQueue::SetObserver(nsIThreadObserver* aObserver) {
Bug 1382922 - Refactor event queue to allow multiple implementations (r=erahm) This patch refactors the nsThread event queue to clean it up and to make it easier to restructure. The fundamental concepts are as follows: Each nsThread will have a pointer to a refcounted SynchronizedEventQueue. A SynchronizedEQ takes care of doing the locking and condition variable work when posting and popping events. For the actual storage of events, it delegates to an AbstractEventQueue data structure. It keeps a UniquePtr to the AbstractEventQueue that it uses for storage. Both SynchronizedEQ and AbstractEventQueue are abstract classes. There is only one concrete implementation of SynchronizedEQ in this patch, which is called ThreadEventQueue. ThreadEventQueue uses locks and condition variables to post and pop events the same way nsThread does. It also encapsulates the functionality that DOM workers need to implement their special event loops (PushEventQueue and PopEventQueue). In later Quantum DOM work, I plan to have another SynchronizedEQ implementation for the main thread, called SchedulerEventQueue. It will have special code for the cooperatively scheduling threads in Quantum DOM. There are two concrete implementations of AbstractEventQueue in this patch: EventQueue and PrioritizedEventQueue. EventQueue replaces the old nsEventQueue. The other AbstractEventQueue implementation is PrioritizedEventQueue, which uses multiple queues for different event priorities. The final major piece here is ThreadEventTarget, which splits some of the code for posting events out of nsThread. Eventually, my plan is for multiple cooperatively scheduled nsThreads to be able to share a ThreadEventTarget. In this patch, though, each nsThread has its own ThreadEventTarget. The class's purpose is just to collect some related code together. One final note: I tried to avoid virtual dispatch overhead as much as possible. Calls to SynchronizedEQ methods do use virtual dispatch, since I plan to use different implementations for different threads with Quantum DOM. But all the calls to EventQueue methods should be non-virtual. Although the methods are declared virtual, all the classes used are final and the concrete classes involved should all be known through templatization. MozReview-Commit-ID: 9Evtr9oIJvx
2017-06-21 05:42:13 +03:00
MutexAutoLock lock(mLock);
nsCOMPtr observer = aObserver;
mObserver.swap(observer);
if (NS_IsMainThread()) {
TaskController::Get()->SetThreadObserver(aObserver);
}
Bug 1382922 - Refactor event queue to allow multiple implementations (r=erahm) This patch refactors the nsThread event queue to clean it up and to make it easier to restructure. The fundamental concepts are as follows: Each nsThread will have a pointer to a refcounted SynchronizedEventQueue. A SynchronizedEQ takes care of doing the locking and condition variable work when posting and popping events. For the actual storage of events, it delegates to an AbstractEventQueue data structure. It keeps a UniquePtr to the AbstractEventQueue that it uses for storage. Both SynchronizedEQ and AbstractEventQueue are abstract classes. There is only one concrete implementation of SynchronizedEQ in this patch, which is called ThreadEventQueue. ThreadEventQueue uses locks and condition variables to post and pop events the same way nsThread does. It also encapsulates the functionality that DOM workers need to implement their special event loops (PushEventQueue and PopEventQueue). In later Quantum DOM work, I plan to have another SynchronizedEQ implementation for the main thread, called SchedulerEventQueue. It will have special code for the cooperatively scheduling threads in Quantum DOM. There are two concrete implementations of AbstractEventQueue in this patch: EventQueue and PrioritizedEventQueue. EventQueue replaces the old nsEventQueue. The other AbstractEventQueue implementation is PrioritizedEventQueue, which uses multiple queues for different event priorities. The final major piece here is ThreadEventTarget, which splits some of the code for posting events out of nsThread. Eventually, my plan is for multiple cooperatively scheduled nsThreads to be able to share a ThreadEventTarget. In this patch, though, each nsThread has its own ThreadEventTarget. The class's purpose is just to collect some related code together. One final note: I tried to avoid virtual dispatch overhead as much as possible. Calls to SynchronizedEQ methods do use virtual dispatch, since I plan to use different implementations for different threads with Quantum DOM. But all the calls to EventQueue methods should be non-virtual. Although the methods are declared virtual, all the classes used are final and the concrete classes involved should all be known through templatization. MozReview-Commit-ID: 9Evtr9oIJvx
2017-06-21 05:42:13 +03:00
}
ThreadEventQueue::NestedQueueItem::NestedQueueItem(
UniquePtr<EventQueue> aQueue, ThreadEventTarget* aEventTarget)
: mQueue(std::move(aQueue)), mEventTarget(aEventTarget) {}