We are now building with the standard build system - yay!

Not part of the build.
This commit is contained in:
mhammond%skippinet.com.au 2002-05-03 01:23:56 +00:00
Родитель 35ac71aae1
Коммит 1dc9dec488
1 изменённых файлов: 0 добавлений и 231 удалений

Просмотреть файл

@ -1,231 +0,0 @@
# The contents of this file are subject to the Mozilla Public License Version
# 1.1 (the "License"); you may not use this file except in compliance with the
# License. You may obtain a copy of the License at http://www.mozilla.org/MPL/
#
# Software distributed under the License is distributed on an "AS IS" basis,
# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License for
# the specific language governing rights and limitations under the License.
#
# The Original Code is the Python XPCOM language bindings.
#
# The Initial Developer of the Original Code is ActiveState Tool Corp.
# Portions created by ActiveState Tool Corp. are Copyright (C) 2000, 2001
# ActiveState Tool Corp. All Rights Reserved.
#
# Contributor(s): Trent Mick <TrentM@ActiveState.com> (original author)
# Mark Hammond <MarkH@ActiveState.com>
#
# Dumb makefile to build PyXPCOM on linux
#
# The build is by no means clean. I just kept shoving in compiler and linker
# options until it worked. :)
#
# USAGE:
# 1. edit top section as appropriate
# 2. build, install, and test PyXPCOM
# > make -f makefile.stupid.linux DEBUG=1
# > make -f makefile.stupid.linux DEBUG=1 install
# > make -f makefile.stupid.linux DEBUG=1 test
# A debug build is suggested (DEBUG=1) by default because a default
# mozilla build is a debug build. Exclude the "DEBUG=1" to build for a
# release build of mozilla.
#
#-------------------------
# You must edit the variables in this section as appropriate for your machine
# The most common edits will just be:
# MOZ_SRC, INSTALLDIR, and PYTHON_SRC
# =========== START OF SECTION FOR COMMON EDITS =====================
# this will have an "xpcom" subdir on install
INSTALLDIR=/usr/local/ActivePython-2.0/lib/python2.0/site-packages
PYTHON_SRC=/usr/local/ActivePython-2.0
# =========== START OF SECTION FOR COMMON EDITS =====================
# We expect a "mozilla" directory under this
MOZ_SRC=../../../..
MOZCOMPONENTSDIR=$(MOZ_SRC)/mozilla/dist/bin/components
MOZINCLUDES=-I$(MOZ_SRC)/mozilla/dist/include -I$(MOZ_SRC)/mozilla/dist/include/nspr -I$(MOZ_SRC)/mozilla/dist/include/string -I$(MOZ_SRC)/mozilla/dist/include/xpcom
MOZLIBDIR=$(MOZ_SRC)/mozilla/dist/lib
# this is setup to use the *installed* Python directory structure
# - To use the development Python dir structure some changes are
# necessary here *and* below (below, because there two lib dir
# to include in LDFLAGS for the dev dir structure)
PYTHON_SRC=/usr/local/ActivePython-2.0
PYTHONINCLUDES=-I$(PYTHON_SRC)/include/python2.0
PYTHONLIBDIR=$(PYTHON_SRC)/lib/python2.0/config
XPIDL=$(MOZ_SRC)/mozilla/dist/bin/xpidl
IDLINCLUDES=-I$(MOZ_SRC)/mozilla/dist/idl
#-------------------------
# You should not need to edit anything beyond this point.
#
# the main PyXPCOM engine library
ENGINE=src/_xpcommodule.so
# the PyXPCOM loader
LOADER=src/loader/libpyloader.so
all:: $(ENGINE) $(LOADER)
#---- build the PyXPCOM loader
LOADER_CFLAGS=-fpic -fno-rtti -fno-exceptions -Wconversion \
-Wpointer-arith -Wbad-function-cast -Wcast-align -Woverloaded-virtual \
-Wsynth -pedantic -Wno-long-long -pthread -DTRIMMED
ifdef DEBUG
LOADER_CFLAGS += -DDEBUG
endif
# NOTE: not sure if using -rpath is the best way to do this
LOADER_LDFLAGS=-Xlinker -rpath -Xlinker $(MOZLIBDIR) \
-Xlinker -rpath -Xlinker $(MOZLIBDIR)/components \
-Xlinker -rpath -Xlinker $(PYTHONLIBDIR) \
-L$(MOZLIBDIR) -L$(PYTHONLIBDIR)
# NOTE: can't remember if "-shared" is necessary here
LOADER_LIBS=-lpython2.0 -ldl -lpthread -lutil -shared -lxpcom
$(LOADER): src/loader/pyloader.cpp
c++ $(LOADER_CFLAGS) $(MOZINCLUDES) $(PYTHONINCLUDES) \
-c src/loader/pyloader.cpp \
-o src/loader/pyloader.o
c++ $(LOADER_CFLAGS) $(LOADER_LDFLAGS) $(LOADER_LIBS) \
-o $(LOADER) \
src/loader/pyloader.o
#---- build the PyXPCOM engine
ENGINE_CFLAGS=-fpic -fno-rtti -fno-exceptions -Wconversion \
-Wpointer-arith -Wbad-function-cast -Wcast-align -Woverloaded-virtual \
-Wsynth -pedantic -Wno-long-long -pthread -DTRIMMED -nostdlib
ifdef DEBUG
ENGINE_CFLAGS += -DDEBUG
endif
# -DXPCOM_EXPORTS
XPCOM_SRC_OBJECTS = \
src/ErrorUtils.o \
src/PyGBase.o \
src/PyGModule.o \
src/PyGStub.o \
src/PyGInputStream.o \
src/PyGWeakReference.o \
src/PyIClassInfo.o \
src/PyIComponentManager.o \
src/PyIInputStream.o \
src/PyIEnumerator.o \
src/PyIID.o \
src/PyIInterfaceInfo.o \
src/PyIInterfaceInfoManager.o \
src/PyISimpleEnumerator.o \
src/PyISupports.o \
src/Pyxpt_info.o \
src/TypeObject.o \
src/VariantUtils.o \
src/dllmain.o \
src/xpcom.o
%.o: %.cpp
c++ $(ENGINE_CFLAGS) $(MOZINCLUDES) $(PYTHONINCLUDES) \
-c $< -o $@
# NOTE: not sure if using -rpath is the best way to do this
# NOTE: can't remember if "-shared" is necessary here
ENGINE_LDFLAGS=-Xlinker -rpath -Xlinker $(MOZLIBDIR) \
-Xlinker -rpath -Xlinker $(MOZLIBDIR)/components \
-Xlinker -rpath -Xlinker $(PYTHONLIBDIR) \
-Xlinker -shared
ENGINE_LIBS=-lpython2.0 -ldl -lpthread -lutil -lxpcom \
-lnspr4 -lgtk -lgdk -rdynamic -lgmodule -lglib -lm -lplc4 \
-lpthread -lnsl -lresolv -lm -lc -lgcc
$(ENGINE): $(XPCOM_SRC_OBJECTS)
c++ $(ENGINE_CFLAGS) $(ENGINE_LDFLAGS) -o $(ENGINE) \
$(XPCOM_SRC_OBJECTS) -L$(MOZLIBDIR) -L$(PYTHONLIBDIR) $(ENGINE_LIBS)
#---- install PyXPCOM
XPCOM_PACKAGE_FILES = \
__init__.py \
components.py \
file.py \
nsError.py \
register.py \
xpcom_consts.py \
xpt.py \
client/__init__.py \
server/__init__.py \
server/enumerator.py \
server/factory.py \
server/loader.py \
server/module.py \
server/policy.py
# this is a cheasy install
# - no attention to permissions
# - doesn't explicitly use $(XPCOM_PACKAGE_FILES)
install:: all $(XPCOM_PACKAGE_FILES)
mkdir -p $(INSTALLDIR)/xpcom/client
mkdir -p $(INSTALLDIR)/xpcom/server
cp -f *.py $(INSTALLDIR)/xpcom
cp -f client/*.py $(INSTALLDIR)/xpcom/client
cp -f server/*.py $(INSTALLDIR)/xpcom/server
cp -f $(ENGINE) $(INSTALLDIR)/xpcom
mkdir -p $(MOZCOMPONENTSDIR)
cp -f $(LOADER) $(MOZCOMPONENTSDIR)
( \
export PYTHONPATH=$(INSTALLDIR):$(PYTHONPATH) ; \
export MOZILLA_FIVE_HOME=$(MOZ_SRC)/mozilla/dist/bin ; \
export LD_LIBRARY_PATH=$(MOZ_SRC)/mozilla/dist/bin ; \
$(MOZ_SRC)/mozilla/dist/bin/regxpcom \
)
#---- build and run the PyXPCOM test suite
all:: test/test_component/py_test_component.xpt
test/test_component/py_test_component.xpt: test/test_component/py_test_component.idl
$(XPIDL) -m typelib -w $(IDLINCLUDES) -o test/test_component/py_test_component $<
install::
mkdir -p $(MOZCOMPONENTSDIR)
cp -f test/test_component/py_test_component.xpt $(MOZCOMPONENTSDIR)
cp -f test/test_component/py_test_component.py $(MOZCOMPONENTSDIR)
( \
export PYTHONPATH=$(INSTALLDIR):$(PYTHONPATH) ; \
export MOZILLA_FIVE_HOME=$(MOZ_SRC)/mozilla/dist/bin ; \
export LD_LIBRARY_PATH=$(MOZ_SRC)/mozilla/dist/bin ; \
$(MOZ_SRC)/mozilla/dist/bin/regxpcom \
)
test:: install
( \
export PYTHONPATH=$(INSTALLDIR):$(PYTHONPATH) ; \
export MOZILLA_FIVE_HOME=$(MOZ_SRC)/mozilla/dist/bin ; \
export LD_LIBRARY_PATH=$(MOZ_SRC)/mozilla/dist/bin ; \
python test/regrtest.py \
)
runpython: install
( \
export PYTHONPATH=$(INSTALLDIR):$(PYTHONPATH) ; \
export MOZILLA_FIVE_HOME=$(MOZ_SRC)/mozilla/dist/bin ; \
export LD_LIBRARY_PATH=$(MOZ_SRC)/mozilla/dist/bin ; \
python \
)
clean:
find . -name "*~" | xargs rm -f
find . -name "*.o" | xargs rm -f
find . -name "*.pyc" | xargs rm -f
find . -name "*.so" | xargs rm -f