We are now building with the standard build system - yay!

Not part of the build.

extensions/python/xpcom/makefile.stupid.linux

@@ -1,231 +0,0 @@
-# The contents of this file are subject to the Mozilla Public License Version
-# 1.1 (the "License"); you may not use this file except in compliance with the
-# License. You may obtain a copy of the License at http://www.mozilla.org/MPL/
-#
-# Software distributed under the License is distributed on an "AS IS" basis,
-# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License for
-# the specific language governing rights and limitations under the License.
-#
-# The Original Code is the Python XPCOM language bindings.
-#
-# The Initial Developer of the Original Code is ActiveState Tool Corp.
-# Portions created by ActiveState Tool Corp. are Copyright (C) 2000, 2001
-# ActiveState Tool Corp.  All Rights Reserved.
-#
-# Contributor(s): Trent Mick <TrentM@ActiveState.com> (original author)
-#                 Mark Hammond <MarkH@ActiveState.com>
-#
-
-# Dumb makefile to build PyXPCOM on linux
-#
-# The build is by no means clean. I just kept shoving in compiler and linker
-# options until it worked. :)
-#
-# USAGE:
-#	1. edit top section as appropriate
-#	2. build, install, and test PyXPCOM
-#       > make -f makefile.stupid.linux DEBUG=1
-#       > make -f makefile.stupid.linux DEBUG=1 install
-#       > make -f makefile.stupid.linux DEBUG=1 test
-#      A debug build is suggested (DEBUG=1) by default because a default
-#      mozilla build is a debug build. Exclude the "DEBUG=1" to build for a
-#      release build of mozilla.
-#
-
-#-------------------------
-# You must edit the variables in this section as appropriate for your machine
-# The most common edits will just be:
-#    MOZ_SRC, INSTALLDIR, and PYTHON_SRC
-# =========== START OF SECTION FOR COMMON EDITS =====================
-
-# this will have an "xpcom" subdir on install
-INSTALLDIR=/usr/local/ActivePython-2.0/lib/python2.0/site-packages
-
-PYTHON_SRC=/usr/local/ActivePython-2.0
-
-# =========== START OF SECTION FOR COMMON EDITS =====================
-# We expect a "mozilla" directory under this
-MOZ_SRC=../../../..
-
-MOZCOMPONENTSDIR=$(MOZ_SRC)/mozilla/dist/bin/components
-MOZINCLUDES=-I$(MOZ_SRC)/mozilla/dist/include -I$(MOZ_SRC)/mozilla/dist/include/nspr -I$(MOZ_SRC)/mozilla/dist/include/string -I$(MOZ_SRC)/mozilla/dist/include/xpcom
-MOZLIBDIR=$(MOZ_SRC)/mozilla/dist/lib
-
-# this is setup to use the *installed* Python directory structure
-#  - To use the development Python dir structure some changes are
-#    necessary here *and* below (below, because there two lib dir
-#    to include in LDFLAGS for the dev dir structure)
-PYTHON_SRC=/usr/local/ActivePython-2.0
-PYTHONINCLUDES=-I$(PYTHON_SRC)/include/python2.0
-PYTHONLIBDIR=$(PYTHON_SRC)/lib/python2.0/config
-
-XPIDL=$(MOZ_SRC)/mozilla/dist/bin/xpidl
-IDLINCLUDES=-I$(MOZ_SRC)/mozilla/dist/idl
-
-
-#-------------------------
-# You should not need to edit anything beyond this point.
-#
-
-# the main PyXPCOM engine library
-ENGINE=src/_xpcommodule.so
-# the PyXPCOM loader
-LOADER=src/loader/libpyloader.so
-
-all:: $(ENGINE) $(LOADER)
-
-
-#---- build the PyXPCOM loader
-
-LOADER_CFLAGS=-fpic -fno-rtti -fno-exceptions -Wconversion \
-	-Wpointer-arith -Wbad-function-cast -Wcast-align -Woverloaded-virtual \
-	-Wsynth -pedantic -Wno-long-long -pthread -DTRIMMED
-ifdef DEBUG
-LOADER_CFLAGS += -DDEBUG
-endif
-
-# NOTE: not sure if using -rpath is the best way to do this
-LOADER_LDFLAGS=-Xlinker -rpath -Xlinker $(MOZLIBDIR) \
-	-Xlinker -rpath -Xlinker $(MOZLIBDIR)/components \
-	-Xlinker -rpath -Xlinker $(PYTHONLIBDIR) \
-	-L$(MOZLIBDIR) -L$(PYTHONLIBDIR)
-# NOTE: can't remember if "-shared" is necessary here
-LOADER_LIBS=-lpython2.0 -ldl -lpthread -lutil -shared -lxpcom
-$(LOADER): src/loader/pyloader.cpp
-	c++ $(LOADER_CFLAGS) $(MOZINCLUDES) $(PYTHONINCLUDES) \
-		-c src/loader/pyloader.cpp \
-		-o src/loader/pyloader.o
-	c++ $(LOADER_CFLAGS) $(LOADER_LDFLAGS) $(LOADER_LIBS) \
-		-o $(LOADER) \
-		src/loader/pyloader.o
-
-
-#---- build the PyXPCOM engine
-
-ENGINE_CFLAGS=-fpic -fno-rtti -fno-exceptions -Wconversion \
-	-Wpointer-arith -Wbad-function-cast -Wcast-align -Woverloaded-virtual \
-	-Wsynth -pedantic -Wno-long-long -pthread -DTRIMMED -nostdlib
-ifdef DEBUG
-ENGINE_CFLAGS += -DDEBUG
-endif
-
-#	-DXPCOM_EXPORTS
-XPCOM_SRC_OBJECTS = \
-	src/ErrorUtils.o \
-	src/PyGBase.o \
-	src/PyGModule.o \
-	src/PyGStub.o \
-	src/PyGInputStream.o \
-	src/PyGWeakReference.o \
-	src/PyIClassInfo.o \
-	src/PyIComponentManager.o \
-	src/PyIInputStream.o \
-	src/PyIEnumerator.o \
-	src/PyIID.o \
-	src/PyIInterfaceInfo.o \
-	src/PyIInterfaceInfoManager.o \
-	src/PyISimpleEnumerator.o \
-	src/PyISupports.o \
-	src/Pyxpt_info.o \
-	src/TypeObject.o \
-	src/VariantUtils.o \
-	src/dllmain.o \
-	src/xpcom.o
-
-%.o: %.cpp
-	c++ $(ENGINE_CFLAGS) $(MOZINCLUDES) $(PYTHONINCLUDES) \
-		-c $< -o $@
-
-# NOTE: not sure if using -rpath is the best way to do this
-# NOTE: can't remember if "-shared" is necessary here
-ENGINE_LDFLAGS=-Xlinker -rpath -Xlinker $(MOZLIBDIR) \
-	-Xlinker -rpath -Xlinker $(MOZLIBDIR)/components \
-	-Xlinker -rpath -Xlinker $(PYTHONLIBDIR) \
-	-Xlinker -shared
-ENGINE_LIBS=-lpython2.0 -ldl -lpthread -lutil -lxpcom \
-	-lnspr4 -lgtk -lgdk -rdynamic -lgmodule -lglib -lm -lplc4 \
-	-lpthread -lnsl -lresolv -lm -lc -lgcc
-
-$(ENGINE): $(XPCOM_SRC_OBJECTS)
-	c++ $(ENGINE_CFLAGS) $(ENGINE_LDFLAGS) -o $(ENGINE) \
-		$(XPCOM_SRC_OBJECTS) -L$(MOZLIBDIR) -L$(PYTHONLIBDIR) $(ENGINE_LIBS)
-
-
-#---- install PyXPCOM
-
-XPCOM_PACKAGE_FILES = \
-	__init__.py \
-	components.py \
-	file.py \
-	nsError.py \
-	register.py \
-	xpcom_consts.py \
-	xpt.py \
-	client/__init__.py \
-	server/__init__.py \
-	server/enumerator.py \
-	server/factory.py \
-	server/loader.py \
-	server/module.py \
-	server/policy.py
-
-# this is a cheasy install
-#	- no attention to permissions
-#	- doesn't explicitly use $(XPCOM_PACKAGE_FILES)
-install:: all $(XPCOM_PACKAGE_FILES)
-	mkdir -p $(INSTALLDIR)/xpcom/client
-	mkdir -p $(INSTALLDIR)/xpcom/server
-	cp -f *.py $(INSTALLDIR)/xpcom
-	cp -f client/*.py $(INSTALLDIR)/xpcom/client
-	cp -f server/*.py $(INSTALLDIR)/xpcom/server
-	cp -f $(ENGINE) $(INSTALLDIR)/xpcom
-	mkdir -p $(MOZCOMPONENTSDIR)
-	cp -f $(LOADER) $(MOZCOMPONENTSDIR)
-	( \
-		export PYTHONPATH=$(INSTALLDIR):$(PYTHONPATH) ; \
-		export MOZILLA_FIVE_HOME=$(MOZ_SRC)/mozilla/dist/bin ; \
-		export LD_LIBRARY_PATH=$(MOZ_SRC)/mozilla/dist/bin ; \
-		$(MOZ_SRC)/mozilla/dist/bin/regxpcom \
-	)
-
-
-#---- build and run the PyXPCOM test suite
-
-all:: test/test_component/py_test_component.xpt
-
-test/test_component/py_test_component.xpt: test/test_component/py_test_component.idl
-	$(XPIDL) -m typelib -w $(IDLINCLUDES) -o test/test_component/py_test_component $<
-
-install::
-	mkdir -p $(MOZCOMPONENTSDIR)
-	cp -f test/test_component/py_test_component.xpt $(MOZCOMPONENTSDIR)
-	cp -f test/test_component/py_test_component.py $(MOZCOMPONENTSDIR)
-	( \
-		export PYTHONPATH=$(INSTALLDIR):$(PYTHONPATH) ; \
-		export MOZILLA_FIVE_HOME=$(MOZ_SRC)/mozilla/dist/bin ; \
-		export LD_LIBRARY_PATH=$(MOZ_SRC)/mozilla/dist/bin ; \
-		$(MOZ_SRC)/mozilla/dist/bin/regxpcom \
-	)
-
-test:: install
-	( \
-		export PYTHONPATH=$(INSTALLDIR):$(PYTHONPATH) ; \
-		export MOZILLA_FIVE_HOME=$(MOZ_SRC)/mozilla/dist/bin ; \
-		export LD_LIBRARY_PATH=$(MOZ_SRC)/mozilla/dist/bin ; \
-		python test/regrtest.py \
-	)
-
-runpython: install
-	( \
-		export PYTHONPATH=$(INSTALLDIR):$(PYTHONPATH) ; \
-		export MOZILLA_FIVE_HOME=$(MOZ_SRC)/mozilla/dist/bin ; \
-		export LD_LIBRARY_PATH=$(MOZ_SRC)/mozilla/dist/bin ; \
-		python \
-	)
-
-clean:
-	find . -name "*~" | xargs rm -f
-	find . -name "*.o" | xargs rm -f
-	find . -name "*.pyc" | xargs rm -f
-	find . -name "*.so" | xargs rm -f
-