RawAccessFrameRef ensures there is a valid data pointer to the pixel
data for the frame. It is a common pattern for users of
RawAccessFrameRef to follow up with a request for the data pointer
shortly after creation. We can avoid an extra lock by exposing this data
pointer from RawAccessFrameRef, and populating it via
imgFrame::LockImageData.
We currently choose to set the animation parameters (blend method, blend
rect, disposal method, timeout) in imgFrame::Finish instead of
imgFrame::InitForDecoder. The decoders themselves already have access to
the necessary information at the time InitForDecoder is called, so there
is no reason to do this. Moving the configuration to initialization will
allow us to relax the mutex protection on these parameters.
This part simply reorganizes imgFrame, and subsequent parts will
introduce the necessary changes to SurfacePipe and decoders.
The shared memory handle reporting has been generalized to be an
external handle reporting. This is used for both shared memory, and for
volatile memory (on Android.) This will allow us to have a better sense
of just how many handles are being used by images on Android.
Additionally we were not properly reporting forced heap allocated
memory, if we were putting animated frames on the heap. This is because
we used SourceSurfaceAlignedRawData without implementing
AddSizeOfExcludingThis.
image.mem.volatile.min_threshold_kb is the minimum buffer allocation for
an image frame in KB before it will use volatile memory. If it is less
than it will use the heap. This only is set to > 0 on Android.
image.mem.animated.use_heap forces image frames to use the heap if it is
for an animated image. This is only enabled for Android, and was
previously a compile time option also for Android.
Move the initialization of SharedSurfacesParent from the compositor
thread creation to mirror the other WebRender-specific components, such
as the render thread creation. Now it will only be created if WebRender
is in use. Also prevent shared surfaces from being used by the image
frame allocator, even if image.mem.shared is set -- there is no purpose
in allowing this at present. It was causing startup crashes for users
who requested image.mem.shared and/or WebRender via gfx.webrender.all
but did not actually get WebRender at all. Surfaces would get allocated
in the shared memory, try to register themselves with the WR render
thread, and then crash since that thread was never created.
Move the initialization of SharedSurfacesParent from the compositor
thread creation to mirror the other WebRender-specific components, such
as the render thread creation. Now it will only be created if WebRender
is in use. Also prevent shared surfaces from being used by the image
frame allocator, even if image.mem.shared is set -- there is no purpose
in allowing this at present. It was causing startup crashes for users
who requested image.mem.shared and/or WebRender via gfx.webrender.all
but did not actually get WebRender at all. Surfaces would get allocated
in the shared memory, try to register themselves with the WR render
thread, and then crash since that thread was never created.
Factory::DoesBackendSupportDataDrawtarget already fulfills the same
purpose and we should use that instead, as imgFrame is the only user of
the former API. It has the added bonus of allowing us to use shared
surfaces on Linux with WebRender, and using volatile surfaces on Windows
when D2D is disabled.
In bug 1383499 we fixed the case where on Android, animated images could
consume all of the available file handles. This is because each volatile
buffer will contain a file handle on Android, and animated images can
contain many, many frames. However in doing so we introduced a bug where
the stride of replacement surface was aligned to a 16-byte boundary. We
do not currently support any stride value but pixel size * image width
in the image decoding framework. This may be something we correct in the
future but for now, we should just ensure all surfaces follow the
expected stride value.
Animated image frames are never actually released to let the OS purge
them, because AnimationSurfaceProvider keeps them as RawAccessFrameRef.
Meanwhile, each volatile buffer on Android needs a file handle to be
retained for as long as the buffer lives. Given sufficient number of
animated image frames, we could easily exhaust the available file
handles (which in turn causes many problems). As such on Android we
should stick with the heap for animated image frames. On other platforms
it is better to stay because we will avoid a memset, because the OS will
zero-fill the requested pages on our behalf.
Most of the changes in this patch are just using the explicit
constructor from gfx::IntSize to gfx::Size, since gfxSize did
that implicitly but gfx::Size doesn't.
MozReview-Commit-ID: CzikGjHEXje
--HG--
extra : rebase_source : 9d19977f2a774d9a2a653db923553a6c2e06f82a
This patch makes the following changes to the macros.
- Removes PROFILER_LABEL_FUNC. It's only suitable for use in functions outside
classes, due to PROFILER_FUNCTION_NAME not getting class names, and it was
mostly misused.
- Removes PROFILER_FUNCTION_NAME. It's no longer used, and __func__ is
universally available now anyway.
- Combines the first two string literal arguments of PROFILER_LABEL and
PROFILER_LABEL_DYNAMIC into a single argument. There was no good reason for
them to be separate, and it forced a '::' in the label, which isn't always
appropriate. Also, the meaning of the "name_space" argument was interpreted
in an interesting variety of ways.
- Adds an "AUTO_" prefix to PROFILER_LABEL and PROFILER_LABEL_DYNAMIC, to make
it clearer they construct RAII objects rather than just being function calls.
(I myself have screwed up the scoping because of this in the past.)
- Fills in the 'js::ProfileEntry::Category::' qualifier within the macro, so
the caller doesn't need to. This makes a *lot* more of the uses fit onto a
single line.
The patch also makes the following changes to the macro uses (beyond those
required by the changes described above).
- Fixes a bunch of labels that had gotten out of sync with the name of the
class and/or function that encloses them.
- Removes a useless PROFILER_LABEL use within a trivial scope in
EventStateManager::DispatchMouseOrPointerEvent(). It clearly wasn't serving
any useful purpose. It also serves as extra evidence that the AUTO_ prefix is
a good idea.
- Tweaks DecodePool::SyncRunIf{Preferred,Possible} so that the labelling is
done within them, instead of at their callsites, because that's a more
standard way of doing things.
--HG--
extra : rebase_source : 318d1bc6fc1425a94aacbf489dd46e4f83211de4
Each concrete class of imgIContainer is able to handle opacity already. All we
need to do is pass opacity value to them.
MozReview-Commit-ID: EMkLnG3YXA1
--HG--
extra : rebase_source : b0a0aad1fec0c2765e96d23ed9b627345c793795
Each concrete class of imgIContainer is able to handle opacity already. All we
need to do is pass opacity value to them.
MozReview-Commit-ID: EMkLnG3YXA1
--HG--
extra : rebase_source : 080a843b34cc1ca27831310d474243b4066f59f2
This patch makes most Run() declarations in subclasses of nsIRunnable have the
same form: |NS_IMETHOD Run() override|.
As a result of these changes, I had to add |override| to a couple of other
functions to satisfy clang's -Winconsistent-missing-override warning.
--HG--
extra : rebase_source : 815d0018b0b13329bb5698c410f500dddcc3ee12
I found these issues locally by moving all of imagelib's .cpp files to SOURCES instead of UNIFIED_SOURCES. (That change isn't part of this patch, though.)
MozReview-Commit-ID: 97Xpfu8eFE6
The new names Create{,PreservingTransform}OrNull() better communicate that
these functions (a) do object creation, and (b) are fallible.
--HG--
extra : rebase_source : a36bd9a2bcdfae281868959403f811f2bc690ad4
If the sync decoding the LookupFrame does encounters an error it will set mError on the RasterImage, which LookupFrame callers check before calling LookupFrame. But they've called LookupFrame before the error was encountered, so we check if the frame has had Abort called on it to determine if we should return it at all.
We only does this if one of the sync decode flags was passed in because IsAborted needs to get the imgFrame's monitor, so we don't want to block consumers that haven't asked for decoding.
This means that in RasterImage::LookupFrame when we are asked to do a sync decode (if needed) we use WaitUntilComplete to wait until the frame is finished decoding. But we would actually return after the next progressive pass notified the monitor to wake up. Thus, we would draw a not-fully-decoded image even though the sync decode flag was passed.
The change in FrameAnimator means that we won't draw the next frame in an animated image until all progressive passes of that image are complete. This seems like what we want anyways.
There is one real use of IsImageComplete left, in imgFrame::Draw, where we need to know if the decoded image data covers the whole image frame. (There are a couple of uses of IsImageComplete in asserts.)
gfxRect can be implicitly constructed from IntRect, which hides a number of
implicit conversion points, makes Moz2Dification harder, and has some
surprising effects.
This patch removes the implicit constructor and replaces it with an explicit
conversion function:
gfxRect ThebesRect(const IntRect&)
This is the obvious outcome of removing the constructor.
But there is also a second, less obvious outcome: currently we do a number of
IntRect-to-Rect conversions using ToRect(), which (surprisingly) works because
it turns into an implicit IntRect-to-gfxRect conversion (via the implicit
constructor) combined with an explicit gfxRect-to-Rect conversion (via
ToRect()). I.e. we do two conversions, going from a Moz2D type to a Thebes
type and back to a Moz2D type!
So this patch also changes these conversion. It moves this existing function:
Rect ToRect(const IntRect&)
from gfx2DGlue.h -- where it doesn't really belong because it doesn't involve
any Thebes types -- to gfx/2d/Rect.h, templatifying and renaming it as
IntRectToRect() in the process.
The rest of the patch deals with fall-out from these changes. The call sites
change as follows:
- IntRect-to-gfxRect conversions:
- old: implicit
- new: ThebesRect()
- IntRect-to-Rect conversions:
- old: ToRect()
- new: IntRectToRect()
--HG--
extra : rebase_source : e4e4c2ad10b36ecad4d57d1630158f3374e403be
The bulk of this commit was generated with a script, executed at the top
level of a typical source code checkout. The only non-machine-generated
part was modifying MFBT's moz.build to reflect the new naming.
CLOSED TREE makes big refactorings like this a piece of cake.
# The main substitution.
find . -name '*.cpp' -o -name '*.cc' -o -name '*.h' -o -name '*.mm' -o -name '*.idl'| \
xargs perl -p -i -e '
s/nsRefPtr\.h/RefPtr\.h/g; # handle includes
s/nsRefPtr ?</RefPtr</g; # handle declarations and variables
'
# Handle a special friend declaration in gfx/layers/AtomicRefCountedWithFinalize.h.
perl -p -i -e 's/::nsRefPtr;/::RefPtr;/' gfx/layers/AtomicRefCountedWithFinalize.h
# Handle nsRefPtr.h itself, a couple places that define constructors
# from nsRefPtr, and code generators specially. We do this here, rather
# than indiscriminantly s/nsRefPtr/RefPtr/, because that would rename
# things like nsRefPtrHashtable.
perl -p -i -e 's/nsRefPtr/RefPtr/g' \
mfbt/nsRefPtr.h \
xpcom/glue/nsCOMPtr.h \
xpcom/base/OwningNonNull.h \
ipc/ipdl/ipdl/lower.py \
ipc/ipdl/ipdl/builtin.py \
dom/bindings/Codegen.py \
python/lldbutils/lldbutils/utils.py
# In our indiscriminate substitution above, we renamed
# nsRefPtrGetterAddRefs, the class behind getter_AddRefs. Fix that up.
find . -name '*.cpp' -o -name '*.h' -o -name '*.idl' | \
xargs perl -p -i -e 's/nsRefPtrGetterAddRefs/RefPtrGetterAddRefs/g'
if [ -d .git ]; then
git mv mfbt/nsRefPtr.h mfbt/RefPtr.h
else
hg mv mfbt/nsRefPtr.h mfbt/RefPtr.h
fi
--HG--
rename : mfbt/nsRefPtr.h => mfbt/RefPtr.h
This commit was generated using the following script, executed at the
top level of a typical source code checkout.
# Don't modify select files in mfbt/ because it's not worth trying to
# tease out the dependencies currently.
#
# Don't modify anything in media/gmp-clearkey/0.1/ because those files
# use their own RefPtr, defined in their own RefCounted.h.
find . -name '*.cpp' -o -name '*.h' -o -name '*.mm' -o -name '*.idl'| \
grep -v 'mfbt/RefPtr.h' | \
grep -v 'mfbt/nsRefPtr.h' | \
grep -v 'mfbt/RefCounted.h' | \
grep -v 'media/gmp-clearkey/0.1/' | \
xargs perl -p -i -e '
s/mozilla::RefPtr/nsRefPtr/g; # handle declarations in headers
s/\bRefPtr</nsRefPtr</g; # handle local variables in functions
s#mozilla/RefPtr.h#mozilla/nsRefPtr.h#; # handle #includes
s#mfbt/RefPtr.h#mfbt/nsRefPtr.h#; # handle strange #includes
'
# |using mozilla::RefPtr;| is OK; |using nsRefPtr;| is invalid syntax.
find . -name '*.cpp' -o -name '*.mm' | xargs sed -i -e '/using nsRefPtr/d'
# RefPtr.h used |byRef| for dealing with COM-style outparams.
# nsRefPtr.h uses |getter_AddRefs|.
# Fixup that mismatch.
find . -name '*.cpp' -o -name '*.h'| \
xargs perl -p -i -e 's/byRef/getter_AddRefs/g'
Also...
- Rename various "operator" identifiers as "op" to match |CompositionOp|.
- Rename |nsBackgroundLayerState::mCompositingOp| as |mCompositionOp| to match
|CompositionOp|.
- Remove some deprecated functions that are no longer needed.
--HG--
extra : rebase_source : 74e9b6eecf6f442e27cc18fd4ae6f668a45188aa
gfxIntSize is just a typedef of gfx::IntSize, so this is very mechanical. The
only tricky part is deciding for each occurrence whether to replace it with
IntSize, gfx::IntSize or mozilla::gfx::IntSize; in all cases I went with the
shortest one that worked given the existing "using namespace" declarations.
--HG--
extra : rebase_source : 67fd15f87222b16defa70ef795c6d77dfacf1c36
imgFrame::SizeOfExcludingThis() measures heap and non-heap memory in a very
complex way. This patch simplifies it and removes gfxMemoryLocation in the
process. (gfxMemoryLocation::OUT_OF_PROCESS was unused.)
--HG--
extra : rebase_source : 72af38fa438b4b42df02231bcf2fa731d247b60d
This conversion was done with the script:
find . -name '*.cpp' -o -name '*.h' -o -name '*.mm' -o -name '*.idl' | \
egrep -v 'cairo-win32-refptr.h|RefPtr.h|TestRefPtr.cpp' | \
xargs sed -i -e 's/mozilla::TemporaryRef</already_AddRefed</g' \
-e 's/TemporaryRef</already_AddRefed</g'
Manual fixups were performed in the following instances:
- We handled mfbt/RefPtr.h manually so as to not convert TemporaryRef itself
into already_AddRefed.
- The following files had explicit Move() calls added to make up for the lack
of a copy constructor on already_AddRefed:
dom/base/ImageEncoder.cpp
dom/media/MediaTaskQueue.{h,cpp}
dom/media/webaudio/PannerNode.cpp
- A redundant overload for MediaTaskQueue::Dispatch was deleted.
- A few manual fixups were required in mfbt/tests/TestRefPtr.cpp.
- Comments, using declarations, and forward declarations relating to
TemporaryRef in dom/canvas/ and gfx/layers/ were changed to refer to
already_AddRefed.
Having this implicit conversion means that we can silently do extra
refcounting when it's completely unnecessary. It's also an obstacle to
making RefPtr more nsRefPtr-like, so let's get rid of it.
Andrew Osmond
Sebastian Hengst
Tristan Bourvon
Milan Sreckovic
Sylvestre Ledru
Kartikaya Gupta
Nicholas Nethercote
Phil Ringnalda
cku
Iris Hsiao
Nathan Froyd
Bas Schouten
Seth Fowler
Ryan Hunt
Mason Chang
Daniel Holbert
Julian Seward
Jonathan Watt
JerryShih
Kyle Huey
Xidorn Quan
Timothy Nikkel
Andrew Comminos
Birunthan Mohanathas