This prevents the variables set in vcvars.bat from causing build failures when
cargo tries to process build scripts in an environment where the default rust
toolchain doesn't match the MozillaBuild shell (in terms of 32-bit or 64-bit).
MozReview-Commit-ID: 5VRnQToYUYf
--HG--
extra : rebase_source : 4ac11f13e17ab04e70c7cb6f60ff46865027f506
VPATH applies to everything, but vpath applies to files matching the
pattern it's given.
--HG--
extra : rebase_source : 17339820e34f4d2f3d4ddde1a8a4325e92bfdb9e
The code doing that was already excluding OSX, so we obviously don't
need it on OSX. On FreeBSD, afaict, USDT (userspace dtrace) probes don't
require that extra ELF object. Solaris presumably does, but the 6 years
old bug 702179 says it's not been working for that long, and configure
doesn't support Solaris targets anyways.
Keeping this build system code working past the changes coming in bug
1262241 is not guaranteed and can't be tested, so I'd rather get rid of
effectively dead code rather than trying to maybe not break it while
moving it.
--HG--
extra : rebase_source : b41ab77804c17529e2580ced8e8b5fd302ff7831
This is a similar issue to bug 582910 which the stack isn't big enough
to run the tests that recurse deeply. Set it 3x larger because the
offical site states they've seen up to 3x stack memory increase for
ASan, also the number was confirmed by the measurements in bug
1259796.
MozReview-Commit-ID: FLASlkVrEUM
--HG--
extra : rebase_source : 3e82439e3df7b1e2fa1759c9693bd197431c9f71
sutagent is no longer built or used; devicemanagerSUT is completely
unused. After this change, devicemanagerADB is the only implementation of
devicemanager, and test harness options like --dm_trans are eliminated.
Although bug 1322703 is backed out, we can remove -FS options to build SIMPLE_PROGRAM.
MozReview-Commit-ID: 7uO3We5hc5n
--HG--
extra : rebase_source : 6f909c4f38ba5a5bdffed7f9ca5be0030b9c681b
Depending on a library or program in misc during a pgo build causes extraneous
rebuilding due to an added FORCE dependency, so we stop adding it except during
the compile tier.
MozReview-Commit-ID: 91dZFa6IRzt
--HG--
extra : rebase_source : 9994a5c05865c81d95ea075c753e270d3c223570
Currently mozconfig.cache overrides a few build options for sccache. This
patch moves them into toolchain.configure so that the build system will
set them properly when sccache is in use. Additionally, {CC,CXX}_WRAPPER
are set in config.mk, so just avoid setting them when sccache is in use.
MozReview-Commit-ID: FYlVKRI8OiN
--HG--
extra : rebase_source : cc7e4346869b98a52840c101824044abc236637f
We've been using -Z7 to make MSVC emit CodeView debug info directly in
the object files instead of in PDB files because sccache can't cache
PDB files if the same one is written to by multiple compiles, which
was previously happening in our build system, and was hard to override
in the NSS build. Now that those are fixed this should work fine.
This adds a bit to the compile rule to remove the PDB file before
compilation, since sccache won't cache a compilation if the PDB file
it is supposed to generate already exists (for the aforementioned reason).
MozReview-Commit-ID: rFlX0XfTGw
--HG--
extra : rebase_source : 8f991ce72115537466f5720c20dc53083f3b2b35
Previously, we overrode the CARGOFLAGS when we set --release
for non-debug builds. This was an oversight from bug 1310939.
MozReview-Commit-ID: LOBkCmxwDzc
--HG--
extra : rebase_source : 0325d1705cb28d6c82369abffc6fac3ca5ee6f0a
We now require cargo by version, and the minimum (0.16)
supports --frozen, so we don't need to check for this.
MozReview-Commit-ID: GPoadLkhRO5
--HG--
extra : rebase_source : e191e5dd2533e28c1bca0812f2776196cc3559cf
This makes the check_mkdir.py match the TEST-PASS output of other tests
in the suite.
MozReview-Commit-ID: FR3m09wRXg0
--HG--
extra : rebase_source : 2e59fb8bc4756a9ef9fdbcf69af80e179be80cc0
We also rename it to check_mkdir.py for consistency with other python
files.
MozReview-Commit-ID: ALuX6NUMsD2
--HG--
rename : config/tests/makefiles/autodeps/check_mkdir.tpy => config/tests/makefiles/autodeps/check_mkdir.py
extra : rebase_source : a7215c832896dd040ae2c5b3c3c2d7247c8163d8
This helps us avoid recursing over every directory when we only need to
run 'make check' in a select few.
MozReview-Commit-ID: BJ3hJBOneIz
--HG--
extra : rebase_source : 2493f924b9ccba3c779e512d7a8b7a2c26f43797
268fa5f3bc25 grafted an old patch to define --features=servo in
rules.mk. That patch was written before RUST_LIBRARY_FEATURES
existed. This commit fixes it up.
MozReview-Commit-ID: L5atm5CsP8d
--HG--
extra : amend_source : 9362db15a696ebd5871df94afb429d6f828de184
Back when the class was written, for the packaging code, it made sense
that the default was True. But now that it's used all over the place,
and that the vast majority of uses are with find_executables=False, it
makes more sense for that to be the default.
--HG--
extra : rebase_source : ff813735fc0d53093f348f20eb77ee03e9b09d4e
Make the symlinks in the dist directory relative instead of absolute.
MozReview-Commit-ID: HS7KL4JwSbV
--HG--
extra : rebase_source : 5dca673cc17423d47e6707d8800f7ee9693a9c48
moz.configure only sets the color flags value for the target compiler.
If the host compiler is a different version and doesn't support color
flags, we may pass unrecognized command line options.
Until we have better distinction between host and target compilers
throughout the build system, just disable automatic color flags for
host invocations. We don't have too many host binaries, so this should
have negligible impact.
MozReview-Commit-ID: KWTLkKvtwHs
--HG--
extra : rebase_source : 97a7240a796bae42221b2952d4dc1e66294e6219
At the same time, remove HOST_LD. It was only used for MSVC builds,
which don't support cross-compile anyways, so we can, at least for now,
use LINK for both host and target.
--HG--
extra : rebase_source : 9ee9e7e1bd3edefc043fa63d5c03f2a242f76982
The only complicating factor here is having to split out the --target
flag from cargo_build_flags, so we can pass the appropriate one
depending on our build target.
In preparation for a world where we have cargo building binaries too,
the existing rules should be renamed to reflect their library
associations. The lone Cargo invocation should be updated to explicitly
build libraries only, so libraries and binaries in the same directory
will work correctly.
Fixup a leftover comment from a previous set of changes while we're here.
iTerm2 interprets the byte sequence "ESC [ 2 i" as a request to open
a print dialog. This sequence can get emitted when printing colorized
compiler output.
Until we figure out a workaround, disable automatic coloring on iTerm2
so developers aren't annoyed.
MozReview-Commit-ID: 3Be4YgArg4k
--HG--
extra : rebase_source : e4e441a6fd97b09f55b05d53af91890649249e1c
This deprecates PYTHON_UNIT_TESTS and replaces it with PYTHON_UNITTEST_MANIFESTS.
In the build system, this means python unittests will be treated the same as all
other test suites that use manifestparser. New manifests called 'python.ini' have
been created for all test directories containing python unittests.
MozReview-Commit-ID: IBHG7Thif2D
--HG--
extra : rebase_source : 11a92a2bc544d067946bbd774975140147458caa
GCC and Clang will colorize compiler output automatically if stdout is a
TTY. Unfortunately, when the build backend is invoked via `mach`,
stdout is not a TTY.
6e9a4c0b9cd8 (bug 1315785) changed mach so it exports an environment
variable indicating whether mach's original stdout is a TTY. This was
later used to add color flags to `cargo` invocations.
Building on that work, this patch adds color flags to compiler
invocations if the compiler supports color and a mach TTY is
detected. The result is that compiler output from `mach build`
will be colorized automatically if Clang or a modern version of
GCC is used.
The only issue I see with this is that Clang doesn't "unset" its color
sequences when printing a newline. As a result, mach's time line
prefixing can sometimes inherit "bold" or other stylings. AFAICT this is
only a minor cosmetic concern. GCC does not exhibit this issue.
MozReview-Commit-ID: 5Icu6aXGZBL
--HG--
extra : rebase_source : 5b2bf5a287fdf8075b3d7dde36b91f3c65b60728
Combined with the previous patch that sets MACH_STDOUT_ISATTY, the
practical effect of this patch is that cargo is invoked with
`--color=always` when mach was attached to a TTY and colorized output
is sent to the terminal.
Note: this doesn't work with Rust/Cargo 1.10 for reasons unknown to me.
It appears there was a bug with Rust/Cargo because `--color=never` still
sent colorized output on that version! Cargo/Rust 1.12.1 works fine.
MozReview-Commit-ID: 6uXS3t3413i
--HG--
extra : rebase_source : 72df6e8248cb14c96850964f694576c7fd2f5fbb
In our current Rust world, we have the following dependency structure:
xul.so --------------------------+
|
xul-gtest.so -+--> xul.a --------+-> gkrust
|
+--> gkrust-gtest
This structure results in link errors with multiply-defined symbols
between gkrust-gtest and gkrust with newer Rust releases when linking
xul-gtest.so. So we have to do something different.
Our new structure is:
xul.so --------------------------+
|
xul-gtest.so -+--> xul.a --------+-> gkrust --+-> gkrust-shared
| |
+--> gkrust-gtest --------------+
and we enforce that a given shared library can only have at most one
Rust library that it depends on. Said Rust library is assumed to
include all significant Rust dependencies of the dependent static
libraries as well. (In the above structure, gkrust is simply a wrapper
around gkrust-shared, so gkrust-gtest doesn't have to include gkrust as
a dependency.)
To validate the PSSH init data passed to EME, I'd like to reuse the same
PSSH parser that the ClearKey CDM shared library uses. So move the code
out of gmp-clearkey and into its own library, so we can link it statically
into code that needs to use it.
MozReview-Commit-ID: 7xSUSmCueJz
--HG--
rename : media/gmp-clearkey/0.1/ClearKeyCencParser.cpp => media/psshparser/PsshParser.cpp
rename : media/gmp-clearkey/0.1/ClearKeyCencParser.h => media/psshparser/PsshParser.h
extra : source : 78dcbc5d3c26547c63269eb14034a67863cf28de
This patch removes the memory usage tracking in the script that wraps the
linking of the xul library. This patch also generalizes the wrapping of the
xul linking process to all platforms.
MozReview-Commit-ID: HyncF3aVwdx
--HG--
extra : rebase_source : 8fb90c896dc57793d1c9d9aa4e8492dec8697e36
Currently make check loops over all directories and runs each test file in PYTHON_UNIT_TESTS
individually. This patch instead creates a single top-level check target that runs
|mach python-tests|. This should make automation more similar to running locally, be a bit
quicker and make it easier to pull python tests out of make check completely at a future date.
MozReview-Commit-ID: 4Hg4zdFyc61
--HG--
extra : rebase_source : 31d0c38a76c11b75d3bf569f2bf22a0666161726
To support android/aarch64, I want to remove the requirement of system's libffi.
MozReview-Commit-ID: Lc3POx09Cks
--HG--
extra : rebase_source : 384852e7b9e61d0d7a950159535e3ddc8457e889
This is relevant when attempting to build libffi with our build system
(libffi expects its assembly sources to be pre-processed).
MozReview-Commit-ID: J6mCUkYYjQh
clang-cl's system header detection doesn't kick in if we're using full
paths to the STL headers we need to include. And if certain headers
aren't recognized as system headers, we get a pile of warnings from
said headers. Use #include_next to ensure that system headers are
recognized as such, and suppress the warnings.
MozReview-Commit-ID: 4ZlAAGa49M1
--HG--
extra : rebase_source : c56711e09118fe930f389cc48543a661c293d7e4
We don't need to hear about ICU redefining macros we set up or about
include paths that are Microsoft-specific, but still resolve to where
they need to go.
MozReview-Commit-ID: D9lFiNCvkOh
--HG--
extra : rebase_source : 66848780bb4e2473a7f1df9a621f0b2f54171e70
As of Python 3, decimal notations of octal values for permission modes
are no longer permitted and will result in a `SyntaxError` exception
(`invalid token`).
Using the proper octal notation which is also Python 2.7 compatible will
fix this issue.
--HG--
extra : rebase_source : 2e897c51f04ad0ee69071f84b98df224f3af72d3
Now that we compile with cargo, we don't have fine-grained control over
the build flags used via environment variables detected in configure or
set in config.mk. We should just remove that dead code so nobody trips
over it.
This patch is really two separate changes.
The first change is that rust crates are large, standalone entities that
may contain multitudes of source files. It therefore doesn't make sense
to keep them in SOURCES, as we have been doing. Moving to use cargo
will require a higher-level approach, which suggests that we need a
different, higher-level representation for Rust sources in the build
system.
The representation here is to have the build system refer to things
defined in Cargo.toml files as the entities dealt with in the build
system, and let Cargo deal with the details of actually building things.
This approach means that adding a new crate to an existing library just
requires editing Rust and Cargo.toml files, rather than dealing with
moz.build, which seems more natural to Rust programmers. By having the
source files for libraries (and binaries in subsequent iterations of
this support) checked in to the tree, we can also take advantage of
Cargo.lock files.
The second is that we switch the core build system over to building via
cargo, rather than invoking rustc directly.
We also clean up a number of leftover things from the Old Way of doing
things. A number of tests are added to confirm that we'll only permit
crates to be built that have dependencies in-tree.
Through an oversight, we listed librul.a twice when linking libxul: once
as part of the "objects" we were linking, and once as a static library.
This duplication is unnecessary and would cause problems later when we
try to generate librul.a via cargo, as cargo will put it someplace
different from where we expect and the two names will conflict. Let's
have rules.mk be the single source of truth for how librul.a is named,
and then the code to link libxul can simply refer to that name.
The only use of this variable is to override NSINSTALL, and its value is
the same as NSINSTALL_PY.
While here, remove the outdated NSINSTALL_NATIVECMD that was used for
pymake.
--HG--
extra : rebase_source : b871fbb409836a17cb8d71cd1e5ddc9d5ad3f49f
as opposed to passing down LINK when cross compiling.
Until bug 1290334, LINK was the variable used by the NSS build system
for the linker on Windows, but it now uses LD, like on other platforms.
But its default value on Windows is "link", which can pick /usr/bin/link
on msys2, instead of MSVC's so, pass down LD from the Gecko build
system. And do so an all platforms in all cases, because it shouldn't
hurt.
--HG--
extra : rebase_source : 3eb8236a8f032468d10c874be2daa1c66986bd47
This patch is really two separate changes.
The first change is that rust crates are large, standalone entities that
may contain multitudes of source files. It therefore doesn't make sense
to keep them in SOURCES, as we have been doing. Moving to use cargo
will require a higher-level approach, which suggests that we need a
different, higher-level representation for Rust sources in the build
system.
The representation here is to have the build system refer to things
defined in Cargo.toml files as the entities dealt with in the build
system, and let Cargo deal with the details of actually building things.
This approach means that adding a new crate to an existing library just
requires editing Rust and Cargo.toml files, rather than dealing with
moz.build, which seems more natural to Rust programmers. By having the
source files for libraries (and binaries in subsequent iterations of
this support) checked in to the tree, we can also take advantage of
Cargo.lock files.
The second is that we switch the core build system over to building via
cargo, rather than invoking rustc directly.
We also clean up a number of leftover things from the Old Way of doing
things. A number of tests are added to confirm that we'll only permit
crates to be built that have dependencies in-tree.
Through an oversight, we listed librul.a twice when linking libxul: once
as part of the "objects" we were linking, and once as a static library.
This duplication is unnecessary and would cause problems later when we
try to generate librul.a via cargo, as cargo will put it someplace
different from where we expect and the two names will conflict. Let's
have rules.mk be the single source of truth for how librul.a is named,
and then the code to link libxul can simply refer to that name.
Configure uses the value of the MT environment variable before falling back
to mt(.exe), but the build system was completely ignoring the MT
environment variable.
--HG--
extra : rebase_source : 8c9b43aeb08493ae5bd6d6361f4f18f097ea0553
Gpsd is the GPS daemon on Linux. It implements support for a wide range
of GPS receivers. This patch adds support for gpsd to the Geolocation
module.
The build system can now test for libgps, which provides the public
interface to gpsd's functionality. If found, |GpsdLocationProvider|
is added to the build.
MozReview-Commit-ID: 1kBgFdEZePI
This removes the unnecessary setting of c-basic-offset from all
python-mode files.
This was automatically generated using
perl -pi -e 's/; *c-basic-offset: *[0-9]+//'
... on the affected files.
The bulk of these files are moz.build files but there a few others as
well.
MozReview-Commit-ID: 2pPf3DEiZqx
--HG--
extra : rebase_source : 0a7dcac80b924174a2c429b093791148ea6ac204
B2g came with its own version of 'libgabi++' in its toolchain. Gecko
on b2g isn't build any longer with this toolchain. With this patch
applied, Gecko's internal version of 'libgabi++' is used for building.
MozReview-Commit-ID: KU4OBYQ6cAW
Per froydnj in bug 1186064 comment #23, "it makes sense to proceed with removing
MSVC 2013 support." This commit does that.
We also go a step further and require VS2015 Update 2 instead of just
update 1. This temporarily brings us down to just 1 officially supported
Visual Studio version. However, VS2015u3 was just released and is
unofficially supported.
Since MOZ_CRT is no longer set, references to it have been removed.
MozReview-Commit-ID: 8MUR6qLzQA5
--HG--
extra : rebase_source : 8f5061080a3d56dd484f9be03649fb65f0145f67
Per froydnj in bug 1186064 comment #23, "it makes sense to proceed with removing
MSVC 2013 support." This commit does that.
We also go a step further and require VS2015 Update 2 instead of just
update 1. This temporarily brings us down to just 1 officially supported
Visual Studio version. However, VS2015u3 was just released and is
unofficially supported.
Since MOZ_CRT is no longer set, references to it have been removed.
MozReview-Commit-ID: 8MUR6qLzQA5
--HG--
extra : rebase_source : 22ab4f47661ead4995d0c5261104abfb02b82aa2
Previously this implementation would use the expected names of the built-in
module and slot to get a handle on them. This doesn't work on distributions that
use other names. The new implementation searches through the slots from the
default module list for one where PK11_HasRootCerts returns true (which
indicates that NSS considers that slot to contain the default built-in root
list).
MozReview-Commit-ID: LmX27hQfFJU
--HG--
extra : rebase_source : 50383dcc77257fe08ce2c7d908e95cda7c4bbe9d
This also fixes the issue of processing the artifacts twice in some
situations (bug 1275673). Note that the artifact download no longer
happens when a specific target is passed to 'mach build'.
MozReview-Commit-ID: Ktys6u3r1kG
Historically, a mozinfo for js standalone build has not been necessary,
but with the move towards a) having things work with mach and b)
buildconfig using the MozbuildObject.from_environment in next patch,
mozinfo becomes necessary (it's required for
MozbuildObject.from_environment to find the directory is an objdir).
Interestingly, hazard builds do both a js standalone build and a desktop
Firefox build at the same time, both of which are done with MOZCONFIG
set in the environment... with the Firefox mozconfig. The result of now
writing a mozinfo for js standalone builds is that in that case, they
end up with a reference to the mozconfig, which the build system then
reads, and finds a MOZ_OBJDIR, which then doesn't match the js
standalone build objdir. So for those builds, reset MOZCONFIG.
Until now, we had some STL headers listed in the system-headers list
such that they would get a system wrapper, but not all of them.
On the other hand, the STL wrappers do the same job as the system
wrappers (applying default visibility), on top of their own, so the
presence of the STL headers in system-headers wasn't making much of a
difference.
Except we have places in the tree where we can't build with STL wrappers
for a number of reasons. And in that case, we *do* need system wrappers
for the STL headers, but we didn't have system wrappers for all of them.
So instead of relying on the STL headers being listed both in
system-headers and stl-headers, concatenate both lists to create the
system wrappers.
Similarly to the considerations about glibc, the Linux compatibility matrix
(https://developer.mozilla.org/en-US/Firefox/Linux_compatibility_matrix)
tells us no distro with Gtk+3 3.4 has a version of libstdc++ older than
4.6.
The data in the matrix doesn't go to that level of detail, but Ubuntu
12.04 LTS, being the only one with version 4.6 (others have at least
4.7), it's worth noting it has version 4.6.3. Which means we can safely
require libstdc++ symbols version 3.4.16 (which were added in 4.6.1).
This will allow us to remove a lot of the stdc++ compatibility hacks.
The requirement for glibc has been set to version 2.7 for a long while.
Spidermonkey uses the pthread_setname_np symbol, which is only available
since glibc 2.12. So far, we've been fortunate that the symbol doesn't
end up in libxul, or tests that link to js directly, because the symbol
is eliminated as being called by effectively dead code.
There are multiple reasons why this is going to change, one of which
being changes to the way things are linked, that will make the linker
not eliminate that code in some cases. Another is that eventually, the
separation of build systems between js and top-level is going to fade,
and the glibc checks, which apply to all gecko binaries, will also apply
to js binaries. They currently are not happening, and would fail because
of pthread_setname_np if they were.
Taking a step back, as of version 46, the mozilla.org builds require at
least Gtk+3 3.4. Which means the requirements for the underlying system
have received a dramatic bump, and it's time to revisit the requirements
for binary compatibility.
I went through all my notes from all the recent times binary compatibility
has been considered, and put together a compatibility matrix on MDN from
that data as well as more recent data that I could find here and there,
about the major non-rolling-release distros (RHEL, Fedora, SuSE, Debian,
Ubuntu)
https://developer.mozilla.org/en-US/Firefox/Linux_compatibility_matrix
Considering the data there, none of the distros that have at least Gtk+3
3.4 have a glibc older than 2.13. The list of symbols that 2.13 provides
that 2.12 doesn't have is not large enough, though, to really care about
depending on 2.13.
This uses a rough form of prefix matching, considering anything that ends in a
path separator and appears as a prefix of a file to be a directory.
MozReview-Commit-ID: 7FJSxI0fBSA
--HG--
extra : rebase_source : e4cece21a25ac1216d96647963955459d0f964e5
By bug 1270621, ETW support is removed. So no one uses messege compiler.
MozReview-Commit-ID: HGUAkrb208N
--HG--
extra : rebase_source : 5178283b781e4805b4e97f09b35a4150119d060a
extra : histedit_source : 40d6992894315b51863db4e7697df1c1ef18edd8
The intent in bug 1271829 was to make all the XCFLAGS set in
config/external/nss/Makefile.in accumulate instead of replacing each
other. Unfortunately, there is also an AC_SUBST variable named XCFLAGS,
use for other purposes, and we ended up adding on top of that variable.
Using a different local variable allows to still accumulate the values,
while keeping away from the XCFLAGS from autoconf.mk.
Since the introduction of the STL wrappers, they have included
mozalloc.h, and multiple times, we've hit header reentrancy problems,
and worked around them as best as we could.
Taking a step back, all mozalloc.h does is:
- declare moz_* allocator functions.
- define inline implementations of various operator new/delete variants.
The first only requires the functions to be declared before they are used,
so mozalloc.h only needs to be included before anything that would use
those functions.
The second doesn't actually require a specific order, as long as the
declaration for those functions comes before their use, and they are
either declared in <new> or implicitly by the C++ compiler.
So all in all, it doesn't matter that mozalloc.h is included before the
wrapped STL headers. What matters is that it's included when STL headers
are included. So arrange things such that mozalloc.h is included after
the first wrapped STL header is fully preprocessed (and all its includes
have been included).
It turns out that, since we're including <new> before setting
_GLIBCXX_DEBUG, the debug parts of c++config.h are not activated, and
that has an impact of how much of the debug features of the STL are
activated.
In contrast, the upcoming changes to the STL wrappers are avoiding the
include of <new> before _GLIBCXX_DEBUG is set, which in turn breaks the
build because, as we link things that use STL wrappers with things that
don't, they end up with a different state of STL debugging, and have
mismatching symbols.
This updates the nss build to require SSE2 instructions on win32.
By default nss builds with -arch:IA32 for maximum compatibility.
Firefox 49 dropped support for non-SSE2 platforms, so propagate
that to the nss external build. XCFLAGS come after the nss build's
default settings, and the last -arch switch will override the
previous ones.
Bump CLOBBER because we've had trouble with file removal permission
errors on integration builds.
MozReview-Commit-ID: 2lfDq0e0T7Y
Previously, this clobbered the XCFLAGS set by MOZ_FOLD_LIBS_FLAGS.
Combine them instead so we can pass multiple options through
this override mechanism.
This is a behaviour change building with --enable-llvm-hacks.
MozReview-Commit-ID: 4WP0asnc7Z6
Enable debug output from the rust compiler when we're doing so
for the C/C++ compilers.
MozReview-Commit-ID: K0iqlPZ1Thu
--HG--
extra : rebase_source : 21220c0b7eeaa9036346e87d2bd1d475a129920e
Key size enforcement for TLS certificates happens at two levels: PSM and NSS.
PSM enforces a minimum of 1024 bits. NSS enforces a minimum of 1023 bits by
default. The NSS error is not overridable, but the PSM error is. This change
allows users to connect to devices with small RSA keys (as little as 512 bits)
using the certificate error override functionality.
MozReview-Commit-ID: 2TZ8c4I3hXC
--HG--
extra : rebase_source : a9c550f15261c711e789a670c90c129c65802ff0
Our current build system support for Rust compiles any Rust crate into a
so-called staticlib, which is a static library (.a file) that includes
the Rust runtime. That staticlib is then linked into libxul. For
supporting multiple crates, this approach breaks down, as linking
multiple copies of the Rust runtime is going to fail.
For supporting multiple crates, the approach taken here is to compile
each crate into a so-called rlib, which is essentially a staticlib
without the Rust runtime linked in. The build system takes note of
every crate destined for linking with libxul (treating them like static
libraries generated from C/C++ files), and generates a super-crate,
whimsically named "rul", that is compiled as a staticlib (so as to
include the Rust runtime) and then linked into libxul. Thus only one
copy of the Rust runtime is included, and the Rust compiler can take
care of any inter-crate dependencies.
This patch currently only supports Rust code in shared libraries, not in
binaries.
- Merge in test changes from Bug 1255784.
- Remove the unnecessary mutex
- Stop doing direct memory work in NSS Token
- Clean up direct memory work in ContentParent
- In order to store persistent crypto parameters, the NSSToken had to move
onto the main thread and be interfaced with via IDL/IPDL.
- Support Register/Sign via NSS using a long-lived secret key
- Rename the softtoken/usbtoken "enable" prefs, because of hierarchy issues
with the WebIDL Pref shadowing.
- Also orders the includes on nsNSSModule.cpp
- Attestation Certificates are in Part 2.
Updates per keeler review comments:
- Use //-style comments everywhere
- Refactor the PrivateKeyFromKeyHandle method
- Rename the logging and fix extraneous NS_WARN_IF/logging combinations
- Other updates from review
April 11-12:
- Correct usage of the "usageCount" flag for PK11_UnwrapPrivKey
- Rebase up to latest
April 15:
- Rebase to latest
MozReview-Commit-ID: 6T8jNmwFvHJ
--HG--
extra : transplant_source : w%26%CES%2Cu%04%3EAl%04%2Cb%E2v%C9%08%3A%CC%F4
Our current build system support for Rust compiles any Rust crate into a
so-called staticlib, which is a static library (.a file) that includes
the Rust runtime. That staticlib is then linked into libxul. For
supporting multiple crates, this approach breaks down, as linking
multiple copies of the Rust runtime is going to fail.
For supporting multiple crates, the approach taken here is to compile
each crate into a so-called rlib, which is essentially a staticlib
without the Rust runtime linked in. The build system takes note of
every crate destined for linking with libxul (treating them like static
libraries generated from C/C++ files), and generates a super-crate,
whimsically named "rul", that is compiled as a staticlib (so as to
include the Rust runtime) and then linked into libxul. Thus only one
copy of the Rust runtime is included, and the Rust compiler can take
care of any inter-crate dependencies.
This patch currently only supports Rust code in shared libraries, not in
binaries. The handling for the rul crate is placed in the common
backend, with a special hook for derived backends to handle shared
library objects.
In contrast to the GNU AS manual, the syntax for the .section directive
uses '%progbits' instead of '@progbits'; at least on ARM. Looking at the
ICU tools and the generated files confirms this.
Multiple people have complained that the build output of printing the
source files being built adds little value. I agree. The extra output
doesn't give really helpful progress info because sources can be built
in non-deterministic order. Furthermore, the extra output hides useful
output like compiler warnings.
This patch makes the default build system output even less verbose. We
no longer print the individual source targets when they are built. We do
still print the targets for binaries, so some sense of progress can be
inferred.
If people like verbosity, they can export the undocumented
BUILD_VERBOSE_LOG environment variable can be set to restore the old
behavior.
MozReview-Commit-ID: KeaeJJkjPJn
--HG--
extra : rebase_source : a90b4b82eeef48d9bd896b5c12907ce05a650d4d
Michael Layzell
Wes Kocher
Mike Hommey
Kartikaya Gupta
Sebastian Hengst
Jeff Gilbert
André Bargull
Iris Hsiao
Jan Beich
Tooru Fujisawa
Ting-Yu Chou
Xidorn Quan
Geoff Brown
David Major
Makoto Kato
BharatR123
ffxbld
Carsten "Tomcat" Book
Chris Manchester
Ted Mielczarek
Nathan Froyd
Phil Ringnalda
Zibi Braniecki
Lee Salzman
Ralph Giles
Mike Shal
Michał Górny
Tom Ritter
Martin Stransky
Gregory Szorc
Benjamin Smedberg
nfroyd@mozilla.com
Jack Bates
Andrew Halberstadt
Richard Marti
Martin Thomson
David Keeler
Emanuel Hoogeveen
Aaron Klotz
Cameron McCormack
Eugen Sawin
Chris Pearce
Enes Goktas
Sergei Chernov
Benjamin Bouvier
Gian-Carlo Pascutto
Elias Probst
Nathan Froyd
James Willcox
Thomas Zimmermann
Tom Tromey
Rob Thijssen
Damien Zammit
Luke Wagner
Andrew Comminos
Dustin J. Mitchell
Thomas Klausner
Nathan Froyd
J.C. Jones
Kai Engert