Per spec, Range.prototype.extractNodes() should copy the nodes in tree
order:
https://dom.spec.whatwg.org/#dom-range-extractcontents
Gecko instead copies them in reverse order. This causes us to fail a
wpt MutationObserver test.
MozReview-Commit-ID: 8MYXGhDsJCd
--HG--
extra : rebase_source : 94fb2e96370e575906ba9927d904561744a1d7bb
If a range endpoint is in the middle of a text node, and you call
deleteContents() or extractContents(), the spec says to delete the data
from the node. In the case of extractContents(), the new text node
that's inserted into the DocumentFragment is a clone with its data set
to the bit that was deleted.
<https://dom.spec.whatwg.org/#dom-range-deletecontents>
<https://dom.spec.whatwg.org/#dom-range-extractcontents>
We don't do this. Instead, we split the text node. Then the bit to
delete is deleted naturally at a later stage together with all the other
nodes.
The result is the same, but on the way there we do a bunch more node
mutations. This causes extra mutation records, which cause us to fail a
WPT test. Chrome passes. Changing to match the spec actually reduces
our lines of code anyway.
MozReview-Commit-ID: FTTV5yNSj71
--HG--
extra : rebase_source : 8d5f36c68c71db0700f0b86d1a73462759f922e8
DOM Standard defines that offset of Range is unsigned long. However, nsRange uses int32_t to them.
This patch makes nsRange use uint32_t instead. However, this patch does NOT allow to set over INT32_MAX as offset values since a lot of users of nsRange cannot treat the values as over INT32_MAX because a lot of internal APIs take int32_t as offsets.
For easier to search such points, this patch adds static_cast<int32_t> to uint32_t variables when they are used for int32_t arguments.
And note that nsContentUtils::ComparePoints() behaves odd. It accepts negative offset and compares such value with valid offset simply. This patch still uses int32_t offset variables in nsRange::CompareNodeToRange() even though it may be negative value if nsINode::IndexOf() returns -1 because the caller of it depends on this behavior.
MozReview-Commit-ID: 8RbOgA86JuT
--HG--
extra : rebase_source : 46d526c6d50dfa2f104439b19b8691477b17a4af
`nsRange` registers mutation observers to adjust the range when content
changes. However, there are some cases where we adjust the start and/or
end offsets but don't notify selection listeners (i.e. we don't call
`nsRange::DoSetRange` to set the new range points, contrary to what the
comment above `nsRange::DoSetRange` says). This patch makes us call
`nsRange::DoSetRange` in those cases. The patch adds a testcase in
test_selectevents.html, and changes a few unexpected-pass cases in
test_composition_text_querycontent.xul that this patch fixed.
MozReview-Commit-ID: 73D8RYMS3MS
--HG--
extra : rebase_source : da0cc3073e4b8ad23c6f6eab42da5aa8b269cae9
This does NOT change variable names like |endNode| because it's not odd and somebody use it for nsINode and endContent for nsIContent. So, changing them needs more work.
MozReview-Commit-ID: 22imUltlu5R
--HG--
extra : rebase_source : 6c93069d0586b37c5084eaa71861085c01da7a7d
This does NOT change variable names like |startNode| because it's not odd and somebody use it for nsINode and startContent for nsIContent. So, changing them needs more work.
MozReview-Commit-ID: H19pTDprRuT
--HG--
extra : rebase_source : 7a7454ac14da48a597ff19a50c863d04dcaddd6e
Web standards use "Container" instead of "Parent". So, nsRange shouldn't use "Parent" for its members and methods.
MozReview-Commit-ID: Ho6N0diuWtE
--HG--
extra : rebase_source : ee4eb7068a68b118c7fe98e9e9e7fa9c9e7f13e2
nsRange::DoSetRange() adds/remove its root to/from mutation observer, initializes common ancestor, registers itself to the common ancestor, unregisters itself from old common ancestor, and notifies selection listeners of selection change.
However, those runtime cost is expensive but on the other hand, a lot of callers set both start and end of the range and that causes calling DoSetRange() twice.
This patch renames Set() to SetStartAndEnd() for easier to understand the meaning and make it call DoSetRange() only once.
MozReview-Commit-ID: FRV55tuBAgg
--HG--
extra : rebase_source : 67adf929cf119e2425f7d3741651217522094590
This avoids conflicts with mozilla::dom::FrameType.
MozReview-Commit-ID: 7aEMbHRaTFk
--HG--
extra : rebase_source : 2d01321f5ce0ec8c0e3f70984674f82678034b3c
In the next patch we want to add a method called
GetUnanimatedStyleContextForElementNoFlush but that's much too long. Instead it
seems better to just drop 'ForElement' from all these methods since it should be
fairly obvious we are getting the style context for an element given that the
first argument is an element.
MozReview-Commit-ID: JQKaEuCKV2F
--HG--
extra : rebase_source : 3ba51f3b00d1ec7bc91102629d9c0abb88992fef
When nsRange::*JS() is called, mCalledByJS is set to true. In such case, Selection::NotifySelectionListeners() may move focus or anyway, it calls selection listeners. Then, they may cause calling non-*JS() methods of the nsRange instance. In this case, nsRange treats the call as called by JS since mCalledByJS is still true.
For preventing this issue, before calling Selection::NotifySelectionListeners(), nsRange should set mCalledByJS to false.
This patch renames AutoCalledByJSSetter to AutoCalledByJSRestore and make it stop setting mCalledByJS automatically. So, AutoCalledByJSRestore works same as AutoRestore now.
MozReview-Commit-ID: IYsbQTGp3VA
--HG--
extra : rebase_source : 582eb2288c035861f16149dde42c22aba555bb5a
Selection may be changed by methods of Selection or methods of Range retrieved by Selection.getRangeAt(). Selection::NotifySelectionListeners() is called after every selection change of each of them, so, this method must be a good point to move focus.
If new common ancestor of all ranges is editable and in an editing host, we should move focus to it. Otherwise, if an editing host has focus but new common ancestor is not editable, we should move focus from the editing host.
For consistency with the other browsers, this patch doesn't move focus to other focusable element.
MozReview-Commit-ID: 6sNsuzwqECX
--HG--
extra : rebase_source : 9ba52ab0bd1249abded81019847c85182ca1926e
Selection needs to be able to distinguish if every selection change is caused by JS (i.e., via Selection API) or the others.
This patch maps some methods of Range and Selection to *JS(). Each of them marks its instance as "used by JS" and calls corresponding method.
With this change, Selection::NotifySelectionListeners() can move focus only when it's caused by Selection API.
MozReview-Commit-ID: 1GoLHiIJ10Y
--HG--
extra : rebase_source : 02d497f9e55b3325a2e01c3041cadb90881dccb8
The main renaming was generated with the following python script:
```
import sys
import re
CAMEL_CASE_REGEX = re.compile(r"(^|_|-)([A-Z])([A-Z]+)")
DISPLAY_REGEX = re.compile(r"\bNS_STYLE_DISPLAY_([^M][A-Z_]+)\b")
def to_camel_case(ident):
return re.sub(CAMEL_CASE_REGEX,
lambda m: m.group(2) + m.group(3).lower(), ident)
def constant_to_enum(constant):
return "StyleDisplay::" + to_camel_case(constant) + ("_" if constant == "NONE" else "")
def process_line(line):
return re.sub(DISPLAY_REGEX,
lambda m: constant_to_enum(m.group(1)), line)
lines = []
with open(sys.argv[1], "r") as f:
for line in f:
lines.append(process_line(line))
with open(sys.argv[1], "w") as f:
for line in lines:
f.write(line)
```
And the following shell commands:
```
find . -name '*.cpp' -exec python display.py {} \;
find . -name '*.h' -exec python display.py {} \;
```
MozReview-Commit-ID: 91xYCbLC2Vf
Aryeh Gregor
Ehsan Akhgari
Masayuki Nakano
Jim Chen
Sylvestre Ledru
Mats Palmgren
Emilio Cobos Álvarez
John Dai
Brian Birtles
Brad Werth
Wes Kocher
Cameron McCormack
Olli Pettay
L. David Baron
Emilio Cobos Álvarez
Jonathan Kew
Andrea Marchesini
Carsten "Tomcat" Book
Jonathan Watt
Andrew McCreight