Similar to ATOK, Japanist 10 requests all or part of composition string.
If we return TS_E_NOLAYOUT in this case, you'll see candidate window at
top-left of the screen.
For avoiding this issue, we should not return TS_E_NOLAYOUT to Japanist 10
when the query range is in composition string.
MozReview-Commit-ID: 2OPafUO5PQC
--HG--
extra : rebase_source : bd7a594d8d3540374d61860651b69528aa6e3793
This patch rearranges these functions so that nsPrefBranch::GetPrefType() calls
into Preferences::GetType(), because all other nsPrefBranch methods depend on
Preferences methods.
The patch also removes the `aKind` argument from GetType(), because it has no
effect -- a pref only has one type, regardless of whether it has a default
value, a user value, or both.
MozReview-Commit-ID: J3vxFPaP8S3
This patch was autogenerated by my decomponents.py
It covers almost every file with the extension js, jsm, html, py,
xhtml, or xul.
It removes blank lines after removed lines, when the removed lines are
preceded by either blank lines or the start of a new block. The "start
of a new block" is defined fairly hackily: either the line starts with
//, ends with */, ends with {, <![CDATA[, """ or '''. The first two
cover comments, the third one covers JS, the fourth covers JS embedded
in XUL, and the final two cover JS embedded in Python. This also
applies if the removed line was the first line of the file.
It covers the pattern matching cases like "var {classes: Cc,
interfaces: Ci, utils: Cu, results: Cr} = Components;". It'll remove
the entire thing if they are all either Ci, Cr, Cc or Cu, or it will
remove the appropriate ones and leave the residue behind. If there's
only one behind, then it will turn it into a normal, non-pattern
matching variable definition. (For instance, "const { classes: Cc,
Constructor: CC, interfaces: Ci, utils: Cu } = Components" becomes
"const CC = Components.Constructor".)
MozReview-Commit-ID: DeSHcClQ7cG
--HG--
extra : rebase_source : d9c41878036c1ef7766ef5e91a7005025bc1d72b
Specifically:
- Make the warning about editing in all-caps;
- Make it clear that about:config is a browser thing;
- Add a mention of the user.js file;
- Use C++ comments, because I prefer them to C comments and I am the module
owner :)
MozReview-Commit-ID: 9GXS5nNHywO
The prefs parser has two significant problems.
- It doesn't separate tokenizing from parsing.
- It is implemented as a loop around a big switch on a "current state"
variable.
As a result, it is hard to understand and modify, slower than it could be, and
in obscure cases (involving comments and whitespace) it fails to parse what
should be valid input.
This patch replaces it with a recursive descent parser (albeit one without any
recursion!) that has separate tokenization. The new parser is easier to
understand and modify, more correct, and has better error messages. It doesn't
do error recovery, but that would be much easier to add than in the old parser.
The new parser also runs about 1.9x faster than the existing parser. (As
measured by parsing greprefs.js's contents from memory 1000 times in
succession, omitting the prefs hash table construction. If the table
construction is included, it's about 1.6x faster.)
The new parser is slightly stricter than the old parser in a few ways.
- Disconcertingly, the old parser allowed arbitrary junk between prefs
(including at the start and end of the prefs file) so long as that junk
didn't include any of the following chars: '/', '#', 'u', 's', 'p'. I.e.
lines like these:
!foo@bar&pref("prefname", true);
ticky_pref("prefname", true); // missing 's' at start
User_pref("prefname", true); // should be 'u' at start
would all be treated the same as this:
pref("prefname", true);
The new parser disallows such junk because it isn't necessary and seems like
an unintentional botch by the old parser.
- The old parser allowed character 0x1a (SUB) between tokens and treated it
like '\n'.
The new parser does not allow this character. SUB was used to indicate
end-of-file (*not* end-of-line) in some old operating systems such as MS-DOS,
but this doesn't seem necessary today.
- The old parser tolerated (with a warning) invalid escape sequences within
string literals -- such as "\q" (not a valid escape) and "\x1" and "\u12"
(both of which have insufficient hex digits) -- accepting them literally.
The new parser does not tolerate invalid escape sequences because it doesn't
seem necessary and would complicate things.
- The old parser tolerated character 0x00 (NUL) within string literals; this is
dangerous because C++ code that manipulates string values with embedded NULs
will almost certainly consider those chars as end-of-string markers.
The new parser treats NUL chars as end-of-file, to avoid this danger and
because it facilitates a significant optimization (described within the
code).
- The old parser allowed integer literals to overflow, silently wrapping them.
The new parser treats integer overflow as a parse error. This seems better,
and it caught existing overflows of places.database.lastMaintenance, in
testing/profiles/prefs_general.js (bug 1424030) and
testing/talos/talos/config.py (bug 1434813).
The first of these changes meant that a couple of existing prefs with ";;" at
the end had to be changed (done in the preceding patch).
The minor increase in strictness shouldn't be a problem for default pref files
such as greprefs.js within the application (which we can modify), nor for
app-written prefs files such as prefs.js. It could affect user-written prefs
files such as user.js; the experience above suggests that integer overflow and
";;" are the most likely problems in practice. In my opinion, the risk here is
acceptable.
The new parser also does a better job of tracking line numbers because it (a)
treats "\r\n" sequences as a single end-of-line marker, and (a) pays attention
to end-of-line sequences within string literals.
Finally, the patch adds thorough tests of both valid and invalid syntax.
MozReview-Commit-ID: JD3beOQl4AJ
The prefs parser has two significant problems.
- It doesn't separate tokenizing from parsing.
- It is implemented as a loop around a big switch on a "current state"
variable.
As a result, it is hard to understand and modify, slower than it could be, and
in obscure cases (involving comments and whitespace) it fails to parse what
should be valid input.
This patch replaces it with a recursive descent parser (albeit one without any
recursion!) that has separate tokenization. The new parser is easier to
understand and modify, more correct, and has better error messages. It doesn't
do error recovery, but that would be much easier to add than in the old parser.
The new parser also runs about 1.9x faster than the existing parser. (As
measured by parsing greprefs.js's contents from memory 1000 times in
succession, omitting the prefs hash table construction. If the table
construction is included, it's about 1.6x faster.)
The new parser is slightly stricter than the old parser in a few ways.
- Disconcertingly, the old parser allowed arbitrary junk between prefs
(including at the start and end of the prefs file) so long as that junk
didn't include any of the following chars: '/', '#', 'u', 's', 'p'. I.e.
lines like these:
!foo@bar&pref("prefname", true);
ticky_pref("prefname", true); // missing 's' at start
User_pref("prefname", true); // should be 'u' at start
would all be treated the same as this:
pref("prefname", true);
The new parser disallows such junk because it isn't necessary and seems like
an unintentional botch by the old parser.
- The old parser allowed character 0x1a (SUB) between tokens and treated it
like '\n'.
The new parser does not allow this character. SUB was used to indicate
end-of-file (*not* end-of-line) in some old operating systems such as MS-DOS,
but this doesn't seem necessary today.
- The old parser tolerated (with a warning) invalid escape sequences within
string literals -- such as "\q" (not a valid escape) and "\x1" and "\u12"
(both of which have insufficient hex digits) -- accepting them literally.
The new parser does not tolerate invalid escape sequences because it doesn't
seem necessary and would complicate things.
- The old parser tolerated character 0x00 (NUL) within string literals; this is
dangerous because C++ code that manipulates string values with embedded NULs
will almost certainly consider those chars as end-of-string markers.
The new parser treats NUL chars as end-of-file, to avoid this danger and
because it facilitates a significant optimization (described within the
code).
- The old parser allowed integer literals to overflow, silently wrapping them.
The new parser treats integer overflow as a parse error. This seems better,
and it caught an existing overflow in testing/profiles/prefs_general.js, for
places.database.lastMaintenance (see bug 1424030).
The first of these changes meant that a couple of existing prefs with ";;" at
the end had to be changed (done in the preceding patch).
The minor increase in strictness shouldn't be a problem for default pref files
such as greprefs.js within the application (which we can modify), nor for
app-written prefs files such as prefs.js. It could affect user-written prefs
files such as user.js; the experience above suggests that ";;" is the most
likely problem in practice. In my opinion, the risk here is acceptable.
The new parser also does a better job of tracking line numbers because it (a)
treats "\r\n" sequences as a single end-of-line marker, and (a) pays attention
to end-of-line sequences within string literals.
Finally, the patch adds thorough tests of both valid and invalid syntax.
MozReview-Commit-ID: 8EYWH7KxGG
* * *
[mq]: win-fix
MozReview-Commit-ID: 91Bxjfghqfw
--HG--
extra : rebase_source : a8773413e5d68c33e4329df6819b6e1f82c22b85
This reverts the change introduced in bug 1394053.
Google has made the download protection lists available to everyone
and so we no longer need to restrict the download protection feature
to official builds.
MozReview-Commit-ID: CQcG5Ip1mDV
--HG--
extra : rebase_source : 55ff4f1e5a09e3c83ad9b24b2eb44789834b2357
This was done using the following script:
37e3803c7a/processors/chromeutils-import.jsm
MozReview-Commit-ID: 1Nc3XDu0wGl
--HG--
extra : source : 12fc4dee861c812fd2bd032c63ef17af61800c70
extra : intermediate-source : 34c999fa006bffe8705cf50c54708aa21a962e62
extra : histedit_source : b2be2c5e5d226e6c347312456a6ae339c1e634b0
This was done using the following script:
37e3803c7a/processors/chromeutils-import.jsm
MozReview-Commit-ID: 1Nc3XDu0wGl
--HG--
extra : source : 12fc4dee861c812fd2bd032c63ef17af61800c70
This was done using the following script:
37e3803c7a/processors/chromeutils-import.jsm
MozReview-Commit-ID: 1Nc3XDu0wGl
--HG--
extra : rebase_source : c004a023389f1f6bf3d2f3efe93c13d423b23ccd