When an animation is reset, we can actually avoid the reallocations by
keeping the frames in the mRecycle and mDiscard queues. There is no real
need to do this. We just need to make sure the recycle rect calculation
is done appropriately, particularly when we haven't reached the end yet
and thus don't know the first frame refresh area yet.
Differential Revision: https://phabricator.services.mozilla.com/D13465
The size was originally incremented in AnimationFrameBuffer::Insert
however if an animation was reset before we finished decoding, it would
count some frames twice in the counter. Now we increment it inside
InsertInternal, where AnimationFrameDiscardingQueue can make a more
informed decision on whether the frame is a duplicate or not.
Additionally we now fail explicitly when we insert more frames on
subsequent decodes than the original decoders. This will help avoid
getting out of sync with FrameAnimator.
Differential Revision: https://phabricator.services.mozilla.com/D13464
If an animated frame buffer was reset just before the necessary frame to
cross the discard threshold, followed by said frame being inserted by
the decoder, it would insert a null pointer into the display queue for
the first frame. This is because it assumed that we have always advanced
past the first frame -- which was true, but the reset placed us back at
the beginning.
This would initially manifest to the user as the animation stopping,
since it could not advance past the first frame. Once a memory report
was requested, it would crash because we assume every frame in the
display queue is valid.
This patch removes the assumption about what frame we have advanced to.
Differential Revision: https://phabricator.services.mozilla.com/D13407
When bug 1508393 landed, it not only enabled producing of full frames
on the decoder threads, it also enabled recycling of old animated image
frame buffers it would have otherwise discarded. It reuses the contents
of the buffer where possible given we know what pixels changed between
the old frame and the frame we want to produce. However where this
calculation was done was incorrect. We originally calculated it when we
advanced the frame, but at that point there is no guarantee that we have
all of the necessary information; we may have fallen behind on decoding.
As such, we move the calculation to where we actually perform the
recycling. At this point we are guaranteed to have all the necessary
frames between the recycling and display queues.
Differential Revision: https://phabricator.services.mozilla.com/D12903
WebRender takes longer than OMTP to release its hold on the current
frame. This is because it is in a separate process and holds onto the
surface in between rendering frames, rather than getting a reference for
each repaint. This patch makes us less aggressive about taking the most
recent surface placed in the recycling queue out to avoid blocking on
waiting for the surface to be released.
Differential Revision: https://phabricator.services.mozilla.com/D10903
Bug 1249474 suggested that we add image/webp to the front of the Accept
header for images, to indicate to servers that we actually support WebP.
Differential Revision: https://phabricator.services.mozilla.com/D8120
Behavior-wise this only removes the HasAttr(src) check, and adds the IsEmpty()
check to the alt attribute value, since this function is only called for <img>
and <input>.
But it also cleans up a bit.
Differential Revision: https://phabricator.services.mozilla.com/D11194
Behavior-wise this only removes the HasAttr(src) check, and adds the IsEmpty()
check to the alt attribute value, since this function is only called for <img>
and <input>.
But it also cleans up a bit.
Differential Revision: https://phabricator.services.mozilla.com/D11194
--HG--
extra : source : 803b224d52a0940b4fb4b3b9cffc6a1fa6e5d4ee
Behavior-wise this only removes the HasAttr(src) check, and adds the IsEmpty()
check to the alt attribute value, since this function is only called for <img>
and <input>.
But it also cleans up a bit.
Differential Revision: https://phabricator.services.mozilla.com/D11194
There were two unrelated buffering problems in nsWebPDecoder. The first
was with the decoder contract. We are expected to loop until the
iterator is unable to provide more data, and wait for the SourceBuffer
to reschedule us, where as nsWebPDecoder::DoDecode only did one pass.
Thus when something yielded wanting more data, we would just wait
forever.
The second was the integration with the libwebp API. We are expected to
retry when we receive SUSPENDED from the decoder, as it decided to yield
pixels instead of continuing to decode as many as possible.
The tests did not cover the first problem because multi chunk decoder
tests do not use SourceBuffer scheduling. This is an oversight. They now
will write a chunk of data, let the SourceBuffer reschedule the decoder,
and repeat until all of the data has been written.
The tests did not cover the second problem because all of the reference
WebP images are too small. This patch adds a new test with a large WebP
image (converted from a Mozilla all hands photo of lanyards). This
should actually trigger the SUSPEND behaviour of libwebp.
Differential Revision: https://phabricator.services.mozilla.com/D10817
For decoders which produce unpaletted partial frames (APNG, WebP), the
surface format should always be BGRA. These frames while partial, are
the same size as the output size of the animated image. When
FrameAnimator performs the blend with the compositing frame, it expects
all pixels we don't care about to be set to fully transparent. If it is
BGRX, they will be set to solid white instead.
Differential Revision: https://phabricator.services.mozilla.com/D10753
First we did not handle the SourceBufferIterator::WAITING state which
can happen when we get woken up but there is no data to read from the
SourceBufferIterator. StreamingLexer handled this properly by yielding
with NEED_MORE_DATA, and properly scheduling the decoder to resume. This
patch does the same in the WebP decoder.
Second nsWebPDecoder::GetType was not implemented. This meant it would
return DecoderType::UNKNOWN, and would fail to recreate the decoder if
we are discarding frames and need to restart from the beginning. In
addition to implementing that method, this patch also corrects an assert
in DecoderFactory::CloneAnimationDecoder which failed to check for WebP
as a supported animated decoder.
This patch also modestly improves the logging output and library method
checks.
Differential Revision: https://phabricator.services.mozilla.com/D10624
In the next few patches, AnimationFrameBuffer will be reworked to split
the discarding behaviour from the retaining behaviour. Once implemented
as separate classes, it will allow easier reuse of the discarding code
for recycling.
Differential Revision: https://phabricator.services.mozilla.com/D7513
When blending full frames off the main thread, FrameAnimator no longer
requires access to the raw data of the frame to advance the animation.
Now we only request a RawAccessFrameRef for the current/next frames when
we have discovered that we need to do blending on the main thread.
In addition to avoiding the mutex overhead of RawAccessFrameRef, this
will also facilitate potentially optimizing the surfaces for the
DrawTarget for individual animated image frames.
Differential Revision: https://phabricator.services.mozilla.com/D7506
When generating display lists for WebRender, we were not caching the
draw result via nsDisplayItemGenericImageGeometry::UpdateDrawResult (or
similar) after completing CreateWebRenderCommands. This is important
because reftests use this to force sync decoding for images; it may be a
reason for image-related intermittent failures on *-qr builds.
Additionally, we may have been requesting fallback in cases where fallback
could not do anything more than WebRender could. For example, if we can't
get an image container yet, there is no point in requesting fallback
because it might just be we haven't started decoding yet. We should just
return the actual draw result in such cases.
In addition to the image container, the draw result can also be useful
for callers to know whether or not the surface(s) in the container are
fully decoded or not. This is used in subsequent parts to avoid
flickering in some cases.
In addition to the image container, the draw result can also be useful
for callers to know whether or not the surface(s) in the container are
fully decoded or not. This is used in subsequent parts to avoid
flickering in some cases.
This patch was written entirely by the following script:
#!/bin/bash
if [ ! -d "./.hg" ]
then
echo "Not in a source tree." 1>&2
exit 1
fi
find . -regex '.*\(ref\|crash\)test.*\.list' | while read FILENAME
do
echo "Processing ${FILENAME}."
# The following has four substitutions:
# * The first one replaces the *first* argument to fuzzy() when it doesn't
# have a - in it, by replacing it with an explicit 0-N range.
# * The second one does the same for the *second* argument to fuzzy().
# * The third does the same for the *second* argument to fuzzy-if().
# * The fourth does the same for the *third* argument to fuzzy-if().
#
# Note that this is using perl rather than sed because perl doesn't
# support non-greedy matching, which is needed for the first argument to
# fuzzy-if.
perl -pi -e 's/(fuzzy\()([^ ,()-]*)(,[^ ,()]*\))/${1}0-${2}${3}/g;s/(fuzzy\([^ ,()]*,)([^ ,()-]*)(\))/${1}0-${2}${3}/g;s/(fuzzy-if\([^ ]*?,)([^ ,()-]*)(,[^ ,()]*\))/${1}0-${2}${3}/g;s/(fuzzy-if\([^ ]*?,[^ ,()]*,)([^ ,()-]*)(\))/${1}0-${2}${3}/g' "${FILENAME}"
done
Differential Revision: https://phabricator.services.mozilla.com/D2974
--HG--
extra : moz-landing-system : lando
DocShells are associated with outer DOM Windows, rather than Documents, so
having the getter on the document is a bit odd to begin with. But it's also
considerably less convenient, since most of the times when we want a docShell
from JS, we're dealing most directly with a window, and have to detour through
the document to get it.
MozReview-Commit-ID: LUj1H9nG3QL
--HG--
extra : source : fcfb99baa0f0fb60a7c420a712c6ae7c72576871
extra : histedit_source : 5be9b7b29a52a4b8376ee0bdfc5c08b12e3c775a
DocShells are associated with outer DOM Windows, rather than Documents, so
having the getter on the document is a bit odd to begin with. But it's also
considerably less convenient, since most of the times when we want a docShell
from JS, we're dealing most directly with a window, and have to detour through
the document to get it.
MozReview-Commit-ID: LUj1H9nG3QL
--HG--
extra : rebase_source : a13c59d1a5ed000187c7fd8e7339408ad6e2dee6
Mark Banner
Andrew Osmond
Ciure Andrei
Geoff Brown
Emilio Cobos Álvarez
Gurzau Raul
Timothy Nikkel
Ehsan Akhgari
Coroiu Cristina
Jeff Muizelaar
Cosmin Sabou
Andreea Pavel
L. David Baron
Kris Maglione
Narcis Beleuzu
Joel Maher
Miko Mynttinen