<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [ ] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because _____
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 1aa3eec66bf88f58b547a4ac71c353e774ecc790
--HG--
extra : subtree_source : https%3A//hg.mozilla.org/projects/converted-servo-linear
extra : subtree_revision : c263ab59c07e33f1137b78c836e89f20924d7702
<!-- Please describe your changes on the following line: -->
See https://github.com/servo/servo/issues/11921
After fixing problematic dependencies this is the last step to support armv7-linux-androideabi target on Android:
- Updates skia dependency to fix a linker error. See https://github.com/servo/skia/pull/136
- Fixes specifying android targets on `./mach package` and `./mach install` steps:
-`./mach package --release --target=arm-linux-androideabi`
-`./mach package --release --target=armv7-linux-androideabi`
-`./mach package --release --target=aarch64-linux-android`
- Make `armv7-linux-androideabi`default when `--android` param is used in build, package or install commands
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#11921 (github issue number if applicable).
<!-- Either: -->
- [x] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: a694f70acf2f011da816a24716d6501ab153c64e
--HG--
extra : subtree_source : https%3A//hg.mozilla.org/projects/converted-servo-linear
extra : subtree_revision : aac3cdcf833b6cd64b5f81d27ae213d7272fe08d
The r25.2.3 Android SDK has been made the current version in saltfs,
so we no longer need to override it via environment variable.
Follow up to servo/servo#15773.
Requires servo/saltfs#644.
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [ ] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 779edd7c4aaf900f12fab378a378b0fc52d4c628
--HG--
extra : subtree_source : https%3A//hg.mozilla.org/projects/converted-servo-linear
extra : subtree_revision : 0b6b6b2cb7e84cd3e6f492df9489a98464fa9d79
<!-- Please describe your changes on the following line: -->
Fix a few issues with the Homebrew repository updating.
Follow-up to #16565; should finish off #17045.
Lightly smoke-tested locally this time.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [ ] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because they will be tested on the builders
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 011a7adf56d9a58be9707cdeeeb824c4b70df84a
--HG--
rename : servo/etc/ci/servo-binary-formula.rb.in => servo/python/servo/servo-binary-formula.rb.in
extra : subtree_source : https%3A//hg.mozilla.org/projects/converted-servo-linear
extra : subtree_revision : 4ba5f84821956f6ec898cabeff5d212d6e276932
<!-- Please describe your changes on the following line: -->
add `geckolib` docs into upload docs script
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [ ] `./mach build -d` does not report any errors
- [ ] `./mach test-tidy` does not report any errors
- [X] These changes fix#16887
<!-- Either: -->
- [ ] There are tests for these changes OR
- [X] These changes do not require tests because are in ci script
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 166abb82bc1ab56343002d8acd365c5d20795ba0
--HG--
extra : subtree_source : https%3A//hg.mozilla.org/projects/converted-servo-linear
extra : subtree_revision : 1974b178c1702367b804595142d4de50d7e4bf44
Splits out the WPT and CSS tests on mac to twice as many builders, each.
Source-Repo: https://github.com/servo/servo
Source-Revision: 4ec2e8b4c56c914af9fd570acaef85460f322fa9
--HG--
extra : subtree_source : https%3A//hg.mozilla.org/projects/converted-servo-linear
extra : subtree_revision : 27010c752bd21fca1fd40920efb307acf5477910
Now that MinGW and MSYS have been removed from the Windows builders,
bash is not available to run the previous upload_nightlies.sh script.
Convert the script to Python 2 for cross-platform support.
Additionally, switch to the `boto3` library for easy uploading
without needing to install `s3cmd`,
and move the code into mach for easy `boto3` installation
as the new `./mach upload-nightly` command.
Also, hard-code the paths to the packages instead of using
globs to look for them, as the paths are static.
(The paths used to contain timestamps,
but we now insert timestamps when uploading to S3
to improve reproducibility.)
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [ ] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#16560 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because Buildbot will test them.
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 9468fae0d443b2a8b9a7694f917dc097ac6c7e60
--HG--
extra : subtree_source : https%3A//hg.mozilla.org/projects/converted-servo-linear
extra : subtree_revision : 593f32ad93c14cb66dd36dfdb41bb36b41a0c558
<!-- Please describe your changes on the following line: -->
See https://github.com/servo/saltfs/issues/661. Update blurdroid and set ANDROID_SDK in build_steps.yml
cc @aneeshusa @larsbergstrom
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [x] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 060a651f8847189e8d0830e35bbf4497014f01d5
--HG--
extra : subtree_source : https%3A//hg.mozilla.org/projects/converted-servo-linear
extra : subtree_revision : c70047d684d85626b0fe84ce8df83d7336df02a5
...and bring jpeg-decoder along for the ride. Minor tweaks were necessary because of rayon API changes.
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
Source-Repo: https://github.com/servo/servo
Source-Revision: fc3a7d03f2b0c5292e7414e7555fb75ae0b1d663
--HG--
extra : subtree_source : https%3A//hg.mozilla.org/projects/converted-servo-linear
extra : subtree_revision : 5141549e2d1236f5d11df90f69de7463813e6a70
This PR includes Android life cycle Improvements and Gradle integration for android packaging.
Android life cycle improvements are implemented in both the new [MainActivity](https://github.com/servo/servo/compare/master...MortimerGoro:android_improvements?expand=1#diff-f43708b102e98272c2af7454b8846927) and native code in this related PR: https://github.com/servo/glutin/pull/117
- Properly handle the life cycle of the Android Activity: manage EGLContext lost & restore, and animation loop pause/resume when the app goes to background/foreground or orientation changes. In the current upstream Servo crashes when the app goes to background, activity stops or changes orientation
- Handle event loop awake for Servo Animation loop
- Handle screen resize & orientation events
- Implement new keep_screen_on preference which keeps Android device's screen from ever going to sleep: very useful for games or WebVR
- Implement a full screen mode enabled by preference: very useful for games or WebVR
- Implement new shell.native-orientation preference which allows to lock the Activity to a specific orientation
- Automatically sync new android assets to sdcard when the Android version code is changed. In the current upstream only the existence of the folder is check but resources are not updated
ofscreen_gl_context is updated to fix this: https://github.com/emilio/rust-offscreen-rendering-context/pull/83
This PR integrates Gradle build system for android packaging. Most of the code is implemented in this [build.gradle](https://github.com/servo/servo/compare/master...MortimerGoro:android_improvements?expand=1#diff-89cdb9324addb994cdba0a158b209547) . We can get rid of [build-apk](https://github.com/servo/servo/compare/master...MortimerGoro:android_improvements?expand=1#diff-40f5a7cf22f94aad059b2c1795347f5e) and manual jar dependency copying in the [package_commands.py](https://github.com/servo/servo/compare/master...MortimerGoro:android_improvements?expand=1#diff-0d425b142c8d10ae6ac1f3711fb5c23a). The correct version of gradle is automatically downloaded using the gradlew wrapper.
Some improvements:
- Allows to include more complex android dependencies/SDKs like AARs, manifest auto-merging and more.
- Improved packaging process: The gradle project is always in the same folder, it uses relative paths for everything (assets, native libraries) and outputs the apk into the correct target folder in servo. In the current upstream, ant/python build system copies the manifest, project, resources and jars each time so you end with multiple copies of the same files.
- Improved dependency declaration. We do not have to manually copy jar dependencies in the python script anymore. The gradle build scripts itself is able to search for the dependencies in the correct servo target folder.
- Supports packaging apks with different architectures: armeabi, armeabi-v7a, aarch64. We still need to fix some native servo compilation issues with armeabi-v7a, aarch64 due to dependencies which use `make`. I'll push this changes in a separate PR of the python build files but the gradle file is already ready to handle that.
- We can easily create product flavors for different versions of Servo. For example a default browser, a WebVR browser with additional dependencies or a Servo android Webview component
- Fixes minor.major.52 build error when blurdroid cargo dependency is compiled using java8 (the default in new Linux machines). The gradle build file enables the new Jack compiler which supports Java8 dependencies.
- The project can be opened with Android Studio and run the brand new GPU debugger on any Android phone. I'll add some docs in the Wiki about this.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#14568 (github issue number if applicable).
<!-- Either: -->
- [x] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 2b5c17c43a517b6d6bd981f5fa905536dddd3beb
--HG--
rename : servo/support/android/apk/AndroidManifest.xml => servo/support/android/apk/app/src/main/AndroidManifest.xml
rename : servo/support/android/apk/res/mipmap/servo.png => servo/support/android/apk/app/src/main/res/mipmap/servo.png
extra : subtree_source : https%3A//hg.mozilla.org/projects/converted-servo-linear
extra : subtree_revision : 2da8cf56223c150832fddb3e8878432f4d64bc6e
<!-- Please describe your changes on the following line: -->
Automatically clean old rustc and cargo nightlies on our builders up to preserve disk space.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [ ] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix#12103 and help with servo/saltfs#321 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because tested manually
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: a754c10e79ef237b500bbf173eb7ba43529e51eb
--HG--
extra : subtree_source : https%3A//hg.mozilla.org/projects/converted-servo-linear
extra : subtree_revision : c0e38115bf4546ca27576a431d259025e52b8c2b
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#16437
Source-Repo: https://github.com/servo/servo
Source-Revision: 2b353e04f0056942276232fa38fbd664ee2c4032
--HG--
extra : subtree_source : https%3A//hg.mozilla.org/projects/converted-servo-linear
extra : subtree_revision : b6995c30499fc1090ade7967c17e18b87461ad9f
<!-- Please describe your changes on the following line: -->
See the commit message for details; the top-level import of Mako causes `./mach bootstrap` to segfault in glibc while exiting, seems to have to do with the native `_speedups.so` library of MarkupSafe, a Mako dependency.
Needed for servo/saltfs#631.
cc @emilio to make sure this is OK for stylo (e.g. #13171)
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [ ] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#12103 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because the test is part of servo/saltfs#631
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 7413c716fb954c1dd27c39929e27bd7b4b188720
--HG--
extra : subtree_source : https%3A//hg.mozilla.org/projects/converted-servo-linear
extra : subtree_revision : b994fad350458883a2b45f665bcbbc69abaccd68
<!-- Please describe your changes on the following line: -->
This is a follow-up to servo/saltfs#620.
There are three other places `windows-gnu` is mentioned, I'm not sure if they can also be removed or not:
- `nightly-x86_64-pc-windows-gnu` is listed as a target in the `appveyor.yml` build matrix
- 2 uses inside `host_platform` in `python/servo/util.py`
- The `windows_gnu` bootstrapper in `python/servo/bootstrap.py`
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [ ] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because they remove unused code
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 7ae9c96467b1a80f104aa5346c9fd11522490541
--HG--
extra : subtree_source : https%3A//hg.mozilla.org/projects/converted-servo-linear
extra : subtree_revision : 8e1b943fe6b0dc1bed06d58fcb3aa6d67d51271a
Let's see if this makes the intermittent failure situation improve!
Source-Repo: https://github.com/servo/servo
Source-Revision: 3345b83fb370536a354ce82bb3493576f873d822
--HG--
extra : subtree_source : https%3A//hg.mozilla.org/projects/converted-servo-linear
extra : subtree_revision : 28e701d2b61b6e40a11cf781d2f5e105e069076a
<!-- Please describe your changes on the following line: -->
Layout viewer now uses local copy of jquery as requested in ticket, so etc/layout_viewer/viewer.html can work without connection to the internet.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix #15964(github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because changes are tested manually by unplugging the internet connection.
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 99f5edbefb69019db0b80688da286a857fd9d6ea
--HG--
extra : subtree_source : https%3A//hg.mozilla.org/projects/converted-servo-linear
extra : subtree_revision : 14a7de95d95bd42c9ab276c59b901467cdeaab81
<!-- Please describe your changes on the following line: -->
(This PR was original created by wlach in the deprecated servo-perf repo: https://github.com/shinglyu/servo-perf/pull/27)
Quoting his original message:
> The servo repository is already linked to from the revision list, there is no need for each job to link to it as well.
>This came up in: https://bugzilla.mozilla.org/show_bug.cgi?id=1342296
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because need full treeherder setup to test
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: d3fa0a3dd61273b8216a1c6f1312ba418dc52c85
--HG--
extra : subtree_source : https%3A//hg.mozilla.org/projects/converted-servo-linear
extra : subtree_revision : 211520ad71024dced3a1f589c8418f2a0ff5ca29
mac-rel-css is currently the job that takes the longest, and its geckolib step is independent from other jobs. Hopefully, this should reduce the overall CI cycle time.
This change was suggested by @mbrubeck.
Source-Repo: https://github.com/servo/servo
Source-Revision: 965c957b7c782ab0e6f946be02b6a7c1894a2236
--HG--
extra : subtree_source : https%3A//hg.mozilla.org/projects/converted-servo-linear
extra : subtree_revision : 704efbc5c32519ddd78174b68bb322646641ccd6
<!-- Please describe your changes on the following line: -->
https://github.com/servo/servo/pull/15559#issuecomment-280003926
> With an empty incremental compilation cache (or, presumably, with incremental compilation disabled), LLVM assertions add 16% to the compilation time in debug mode, 53% (!) in release mode.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#15548 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 1afae52c47e754c6573f4a8b72fcc2e6994d253f
--HG--
extra : subtree_source : https%3A//hg.mozilla.org/projects/converted-servo-linear
extra : subtree_revision : 7cbc302040099b6b6d0b09d6322b618b26ba61ac
<!-- Please describe your changes on the following line: -->
Add a new way to test arbitrary timing from JavaScript (only for Gecko). This is for Stylo testing.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [x] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: e9933f36b771e9aad24b7abcac0ae81b49539d35
--HG--
extra : subtree_source : https%3A//hg.mozilla.org/projects/converted-servo-linear
extra : subtree_revision : 302e5278f435e9dc896d98012769fb1528bab571
These have been superseded by the windows-gnu and windows-msvc versions.
Removing them allows freeing up disk space on the Windows builders.
r? @larsbergstrom
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [ ] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 9cdf78d53d0a101d99e911088a00c677476f5bf1
Teaches the `etc/ci/check_no_panic.sh` script to handle directories,
so it can check all constellation files for panics.
<!-- Please describe your changes on the following line: -->
r? @asajeffrey
There are currently 4 `unwrap()`s in `components/constellation/timer_scheduler.rs`; I'm not sure how you want to handle those.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [ ] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#14976 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because it adds more testing coverage
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: f9505c7fafcbabd24cfa613493ecacd3e29d273e
<!-- Please describe your changes on the following line: -->
The fix from #14935 wasn't quite right.
cc @paulrouget
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [ ] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fixservo/saltfs#575 properly (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because they should be tested by running the mac-nightly builder
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: dc93a72997aefaeb04cdc058b01fdd2eb14cef8f
<!-- Please describe your changes on the following line: -->
This is for Stylo performance testing (at least before we got Talos running)
r?@Manishearth
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because independent from servo itself
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: da25e881459084395b3f8e5891d08de0645b5f0b
<!-- Please describe your changes on the following line: -->
This is a follow up for #13740, so r? @jdm
The first patch enables JSON serialization for flexbox flows, the second one fixed format incompatibilities for the layout viewer.
The 3rd and 4th patches are just layout viewer UI enhancements, we could split that to a spearate PR if you prefer.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#13846 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because it's a trivial debug tool
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 58fec2f05a21eb69899c8ec21e4b95000cfed2f2
<!-- Please describe your changes on the following line: -->
Fixup for #14651. r? @larsbergstrom
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [ ] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because these builders aren't used yet
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 5573f7cea3cc24e76501a05ff94b59c870ce7b82
r? @metajack @edunham
The idea here is that I'm adding `-gnu` and `-msvc` variants in advance of the buildbot changes (in https://github.com/servo/saltfs/pull/491). Once those land and are pushed out to the buildbot master, it'll pick up these changed files and then we can remove the unsuffixed `windows-dev` and `windows-nightly`.
Source-Repo: https://github.com/servo/servo
Source-Revision: 25f32c4513a9d7c3514c4079eef35b1cc5c6b286
<!-- Please describe your changes on the following line: -->
This symbol is present in the new LLVM C++ stdlib, which is loaded dynamically from a .so file during startup.
Fixes#14571
r? @Ms2ger
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [ ] `./mach build -d` does not report any errors
- [ ] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 7c7dd0f965c53de4557aa8ad1762f2314b6036e8
r? @aneeshusa
This change implements fixes for #13551 for Linux and MacOS targets.
`/python/servo/package_commands.py` was modified so that:
- On MacOS, it creates all intermediate packaging directories like `dmg`, `brew`, and `brew-tmp` under `target/(release|debug)`, rather than in `target` directly.
- On MacOS, all packaging artifacts (`.dmg`, brew `.tar.gz`) are packaged under `target/(release|debug)`, rather than in `target` directly.
- On Linux, the resulting `tar.gz` Servo package is placed under `target/(release|debug)`, rather than in `target`.
- Also did some extra cleanup around path parsing in the MacOS packaging code, to use `os.path` methods rather than straight `'/'` parsing with `split` and `join` where it was applicable.
`/etc/ci/upload_nightly.sh` was modified to:
- Look for artifacts in `target/release` for `mac`, `macbrew`, and `linux` platforms, rather than just `target/`.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#13551
- [x] These changes do not require tests because it is based on CI and packaging tools. They were manually tested for correctness.
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
…lease/debug as specified or detected. Modify macos packaging to create all packages under release/debug directory. Updated etc/ci/upload_nightly.sh to support uploading from either release/debug directory, depending on what was built
Source-Repo: https://github.com/servo/servo
Source-Revision: 4cb3404c09d0b6a5a19a2c842d2e8809fae31e87
<!-- Please describe your changes on the following line: -->
This patch enables us to run `./mach test-perf --submit` in CI to submit the result to perfherder. r? @aneeshusa
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because too many manual setup required to test it
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 7d66bd710cee081155487ef36fe5b490e181c780
<!-- Please describe your changes on the following line: -->
We run the `etc/ci/performance` test on Gecko for comparison, but the old add-on approach doesn't work anymore. I'm using selenium to drive Gecko instead. Also did some refactoring and fixed some nits I saw along the way.
r? @aneeshusa
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#14148 (github issue number if applicable).
<!-- Either: -->
- [x] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 69f914b8b567424c85f9a947b453e7e9b0d4d243
cc @metajack
The plan here is to run this on the error summary of the logs after each WPT/CSS run, as `./mach filter-intermittents wpt-errorsummary.log --output filtered-errorsummary.log --auth /path/to/authfile`
The `filtered-errorsummary.log` file will be a buildbot artifact for this run, and can be used for updating test results.
We change WPT/CSS runs to not cause test failures on Buildbot; instead; the test failure will be caused by this job.
We should at some point add a separate highfive task which ccs the appropriate bugs and tracks consistent failures. (We can change mach filter-intermittents to output a second file of intermittents matched to bug numbers to make this easy)
A small issue with this is that this simple task might mask failures of the WPT harness itself. We have a separate test that tests if the test harness works though. (This test will fail if the log files it requires don't exist, perhaps that's enough to solve the problem)
r? @larsbergstrom
Source-Repo: https://github.com/servo/servo
Source-Revision: 4021d057c941f38ca9f9ef9bb03f91d1b54f01c0
<!-- Please describe your changes on the following line: -->
Properly set the software rendering environment variables and use `-z` to run the performance test in headless mode. Also changed some logging format to improve the readability and reduce log size.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#13903 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because need manual test
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: f5a3d68513456b991313dfac19b94d630cc326be
I tested out building a release with the flag and added a `debug_assert!(false)` in `fn main` and it panicked.
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#14009 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [X] These changes do not require tests because they are manually tested
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: dbce416ad436b9a3a007181fbd5d0f158cd7d9e4
to CI upload, swaps semicolons for dashes
<!-- Please describe your changes on the following line: -->
This fixes#12128 by moving the datetimestamping responsibility from the python packaging script to the CI build shell script.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#12128 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [X] These changes do not require tests because they are part of CI build
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 4c5d84d81a45a2f85ceca88ca69374b464722cd1
<!-- Please describe your changes on the following line: -->
This is a followup for #13432. This patch should be landed after #13740 to accommodate the change in JSON format in #13740. It also included some UI layout fixes to make the UI more readable. I'm splitting the commits for easier review, I'll squash them after a r+.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because it's just a external debug tool
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 524ed827007dee1563aed25f3bc3d0edff77ea78
<!-- Please describe your changes on the following line: -->
r? @larsbergstrom
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [ ] `./mach build -d` does not report any errors
- [ ] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because that is #13838
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
These steps were used while testing the transition to dynamic steps.
Now that dynamic steps are working properly, this builder has been
decommissioned, and its steps are no longer needed.
Source-Repo: https://github.com/servo/servo
Source-Revision: e4fcc066d1248dc072026ba1dd887ffca5049c53
<!-- Please describe your changes on the following line: -->
This patch restores the layout trace viewer removed in e7510ab90c , with some changes that makes it work with https://github.com/servo/servo/pull/13214
Sorry for the minified 3rd party CSS frameworks, it was from the original version and I haven't got time to replace them with hand-crafted CSS.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because is a stand-alone debugging tool
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 0af9be94298c676f5bf7881847880e6f43955602
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [ ] `./mach build -d` does not report any errors
- [ ] `./mach test-tidy` does not report any errors
- [x] These changes are part of https://github.com/servo/saltfs/issues/316
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because they just copy the steps configuration
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Now that our Buildbot configuration is successfully able to read the
steps configuration from the main servo repo and run builds, sync the
steps in the servo tree to match the latest steps.yml from the saltfs
repo.
Source-Repo: https://github.com/servo/servo
Source-Revision: ff04558ce26203cc3eb63edc9a15a6e6622b814a
Aneesh Agrawal
Imanol Fernandez
Anthony Ramine
Cesar Carruitero
Lars Bergstrom
Nathan Froyd
UK992
Josh Matthews
Manish Goregaokar
Volodymyr M. Lisivka
Shing Lyu
Simon Sapin
Paul Rouget
Shing Lyu
William Lee
Corey Farwell
Rohit Burra
Jake Goldsborough
6br
Mátyás Mustoha