This lets us record at arbitratry offsets. Without it gfxContext::GetClip()
would break because it uses DrawTarget::GetRect() as the initial rect that it
intersects subsequent clips with. We also can't just use a DrawTargetOffset
because that applies a transform to the inner DrawTarget and will impact the
recorded commands.
Differential Revision: https://phabricator.services.mozilla.com/D37075
--HG--
extra : moz-landing-system : lando
This changes CreateClippedDrawTarget so that instead of taking
a max size and a transform it just takes a user space rect of
the desired bounds.
This change allows the caller to not worry about the computing
a max size based on the current clip. Instead this responsibility
is lowered into the specific backends.
The main motivation for this work is to allow blob recoordination
to create recordings that don't depend on the current clip.
Some additional benefits are that the API is easier to use and
as can be seen simplifies the SVG masking code because it doesn't
need to track surface offsets manually.
It's also an important step towards removing all the uses of
gfxContext::GetClipExtents which will let us get rid of the separate
clipping stack in gfxContext and help us move off of gfxContext
completely.
Most backend implementations of CreateClippedDrawTarget are relatively
simple. DrawTargetCapture is modified to track the current clip rect
so that it can create a new DrawTargetCapture of the appropriate size
without needing to worry about lazy resolution.
Differential Revision: https://phabricator.services.mozilla.com/D33363
--HG--
extra : moz-landing-system : lando
There are a number of places where we look at a source surface's type
and then cast it to get inner information. Wrapping surfaces with offset
surfaces breaks this. Adding GetUnderlyingSurface will let us see
inside. We use this in the D2D backend to make sure we do
unintentionally convert to datasurfaces.
Differential Revision: https://phabricator.services.mozilla.com/D35559
--HG--
extra : moz-landing-system : lando
This changes CreateClippedDrawTarget so that instead of taking
a max size and a transform it just takes a user space rect of
the desired bounds.
This change allows the caller to not worry about the computing
a max size based on the current clip. Instead this responsibility
is lowered into the specific backends.
The main motivation for this work is to allow blob recoordination
to create recordings that don't depend on the current clip.
Some additional benefits are that the API is easier to use and
as can be seen simplifies the SVG masking code because it doesn't
need to track surface offsets manually.
It's also an important step towards removing all the uses of
gfxContext::GetClipExtents which will let us get rid of the separate
clipping stack in gfxContext and help us move off of gfxContext
completely.
Most backend implementations of CreateClippedDrawTarget are relatively
simple. DrawTargetCapture is modified to track the current clip rect
so that it can create a new DrawTargetCapture of the appropriate size
without needing to worry about lazy resolution.
Differential Revision: https://phabricator.services.mozilla.com/D33363
--HG--
extra : moz-landing-system : lando
Because of the way the canvas 2D implementation juggles between path builders and paths, we have to keep track of current and first points in the path, in case a builder is created out of it.
Differential Revision: https://phabricator.services.mozilla.com/D33757
--HG--
extra : source : c79b3af2395894b449731fccdd9eb006b4d0189e
* Remove redundant virtual keywords
* Mark all destructors of inheriting classes as virtual for clarity
* Mark all classes without virtual destructor as final (exposed errors)
* Make destructor virtual where it needed to be (some were missing)
* Replace empty ({}) code declaration in header with = default
* Remove virtual unused methods
I probably missed some, it quickly became a rabbit hole.
Differential Revision: https://phabricator.services.mozilla.com/D26060
--HG--
extra : moz-landing-system : lando
This lets us avoid drawing the complete input for ever tile when
drawing filters into a tile.
Differential Revision: https://phabricator.services.mozilla.com/D17686
--HG--
extra : moz-landing-system : lando
This is needed so that we can use SourceSurfaces that don't have a
implicit 0,0 origin like those that would come from a DrawTargetTiled
or DrawTargetOffset.
Differential Revision: https://phabricator.services.mozilla.com/D17684
--HG--
extra : moz-landing-system : lando
This is a best effort attempt at ensuring that the adverse impact of
reformatting the entire tree over the comments would be minimal. I've used a
combination of strategies including disabling of formatting, some manual
formatting and some changes to formatting to work around some clang-format
limitations.
Differential Revision: https://phabricator.services.mozilla.com/D13073
--HG--
extra : moz-landing-system : lando
This is a best effort attempt at ensuring that the adverse impact of
reformatting the entire tree over the comments would be minimal. I've used a
combination of strategies including disabling of formatting, some manual
formatting and some changes to formatting to work around some clang-format
limitations.
Differential Revision: https://phabricator.services.mozilla.com/D13073
--HG--
extra : moz-landing-system : lando
This is a best effort attempt at ensuring that the adverse impact of
reformatting the entire tree over the comments would be minimal. I've used a
combination of strategies including disabling of formatting, some manual
formatting and some changes to formatting to work around some clang-format
limitations.
Differential Revision: https://phabricator.services.mozilla.com/D13073
--HG--
extra : moz-landing-system : lando
Badly-behaved consumers of DrawTargetRecording can trigger recording of
draw calls that will fail to allocate required draw targets when the
recording is replayed. This patch tries to guard against this by
detecting these situations at record-time rather than crashing at
replay-time. When such a situation is detected, it will crash (for
content processes, to catch such scenarios) or gracefully fail (for
other processes).
Differential Revision: https://phabricator.services.mozilla.com/D11527
--HG--
extra : moz-landing-system : lando
This just makes the existing hack available to all DataSourceSurface implementations by default, since we use different ones with WR.
MozReview-Commit-ID: GVR0rIx8wtD
Depends on D10036
Differential Revision: https://phabricator.services.mozilla.com/D10038
--HG--
extra : moz-landing-system : lando
This just makes the existing hack available to all DataSourceSurface implementations by default, since we use different ones with WR.
MozReview-Commit-ID: GVR0rIx8wtD
Depends on D10036
Differential Revision: https://phabricator.services.mozilla.com/D10038
--HG--
extra : moz-landing-system : lando
This just makes the existing hack available to all DataSourceSurface implementations by default, since we use different ones with WR.
MozReview-Commit-ID: GVR0rIx8wtD
Depends on D10036
Differential Revision: https://phabricator.services.mozilla.com/D10038
--HG--
extra : moz-landing-system : lando
This commit adds an API to DrawTarget to draw a surface that will be provided
at the time a recording is replayed. The surface is referenced using a user
interpreted ID.
This will be used for drawing a OOP iframe, and the ID will be the TabId.
Differential Revision: https://phabricator.services.mozilla.com/D6786
--HG--
extra : rebase_source : d5ce9b429c89e9adb0e5fb180f60125e64f12d4a
In MultiTiledContentClient we can create a DrawTargetTiled with a
different origin than the layer we are painting. We must therefore
ensure when edge-padding that we provide the valid region in the draw
target's device-space rather than layer-space. Not doing so was
causing us to pad out in incorrect directions, causing visible seams.
Differential Revision: https://phabricator.services.mozilla.com/D3993
--HG--
extra : moz-landing-system : lando
This commit exposes a method on DrawTargetCapture to see if it has
captured any drawing commands. This allows us to not dispatch
paint tasks if they will do nothing.
Ideally these tasks would execute instantly on the PaintThread, and
we would never delay sending the layer transaction or block on the
next paint, but with thread starvation and context switches it's
best to just not send them.
MozReview-Commit-ID: 7ywkEDBw6EX
--HG--
extra : rebase_source : c60c1c25d551e4a7c14c529137f8e0babc888466
extra : source : 7ae4c893867a5f7df81e0757d4b4a6a21cbc6986
This commit adds the ability to create a different kind of DrawTargetCapture which
has a limit on the size of which its CaptureCommandList can grow before it is
synchronously flushed to its destination DrawTarget.
Special care is taken to not do a sync flush until we would need to resize
the backing store of the CaptureCommandList. This allows us to not waste
memory we've already allocated.
The async painting content clients are updated to use it, and get a default
value from a new preference.
MozReview-Commit-ID: CJL7ffvaRzR
--HG--
extra : rebase_source : f646862dcef7a480b21dfb7ddb1fa165338ba506
extra : source : b865a866fe5a3257615cb54b7e5e790cc9331988
This commit adds a buffer unrotate operation to DrawTarget. It's
initially implemented with LockBits in DrawTarget. DrawTargetDual
overrides the implementation to pass on the operation to it's
DrawTargets.
No override is given for DrawTargetCapture as we intentionally
avoid this code path when async painting as it can fail.
This is needed so that RotatedBuffer can expose a single DrawTarget,
which can be a DrawTarget (for normal alpha), DrawTargetDual (for
component alpha), or DrawTargetCapture (when async painting).
MozReview-Commit-ID: csjjZ733hl
--HG--
rename : gfx/layers/BufferUnrotate.cpp => gfx/2d/BufferUnrotate.cpp
rename : gfx/layers/BufferUnrotate.h => gfx/2d/BufferUnrotate.h
extra : rebase_source : 5d96e2a5d36a01f2f9992adb37830e56436c7c35
extra : source : 64cb50b227e0ae604653f03ce2e892493126392e
This commit adds the ability to create a SourceSurfaceDual directly,
instead of only from a DrawTargetDual. This allows SourceRotatedBuffer
to expose itself as a single SourceSurface for a later commit.
MozReview-Commit-ID: K21K42cGDy1
--HG--
extra : rebase_source : d3fe48ac711f9cd28799bfd8d36b74750cb15554
extra : source : 392a724d5acd25854e871fa47335c4b938fe9ae1
This commit adds an operation to perform 'edge padding' on a draw
target. By default this is performed using LockBits, but it's
overriden in DrawTargetTiled and DrawTargetCapture to propagate
the call so it functions correctly.
This helps TiledContentClient move from applying this operation
on a per texture client basis, to being able to do it on the
DrawTargetTiled after painting. This in turn helps move all
paint thread operations into DrawTargetCapture.
MozReview-Commit-ID: 2ncOTxGXQfk
--HG--
rename : gfx/layers/BufferEdgePad.cpp => gfx/2d/BufferEdgePad.cpp
rename : gfx/layers/BufferEdgePad.h => gfx/2d/BufferEdgePad.h
extra : rebase_source : a3315644fe31f2a432935dcbfdb9969c58b691e1
extra : source : 699c954992f87db7fc792f5562090de42a8162cb
This adds a DrawTargetOffset which is basically a simplified
DrawTargetTiled that only supports one tile. It useful for situations
where Cairo's device offset was used previously.
This also replaces WebRender's use of DrawTargetTiled which was just trying to
apply offset.
MozReview-Commit-ID: I33PB6CnHh0
--HG--
extra : rebase_source : 9fa51a0180343231cfca41daa0e3fa53f1b7befe
Lee Salzman
Jeff Muizelaar
Jeff Muizelaar
Narcis Beleuzu
Bob Owen
Nicolas Silva
Sylvestre Ledru
Jean-Yves Avenard
Bas Schouten
Ehsan Akhgari
Cosmin Sabou
Andreea Pavel
Andrew Osmond
Kartikaya Gupta
Csoregi Natalia
Matt Woodrow
Brindusan Cristian
Ryan Hunt
Jamie Nicol
Andi-Bogdan Postelnicu