The inclusions were removed with the following very crude script and the
resulting breakage was fixed up by hand. The manual fixups did either
revert the changes done by the script, replace a generic header with a more
specific one or replace a header with a forward declaration.
find . -name "*.idl" | grep -v web-platform | grep -v third_party | while read path; do
interfaces=$(grep "^\(class\|interface\).*:.*" "$path" | cut -d' ' -f2)
if [ -n "$interfaces" ]; then
if [[ "$interfaces" == *$'\n'* ]]; then
regexp="\("
for i in $interfaces; do regexp="$regexp$i\|"; done
regexp="${regexp%%\\\|}\)"
else
regexp="$interfaces"
fi
interface=$(basename "$path")
rg -l "#include.*${interface%%.idl}.h" . | while read path2; do
hits=$(grep -v "#include.*${interface%%.idl}.h" "$path2" | grep -c "$regexp" )
if [ $hits -eq 0 ]; then
echo "Removing ${interface} from ${path2}"
grep -v "#include.*${interface%%.idl}.h" "$path2" > "$path2".tmp
mv -f "$path2".tmp "$path2"
fi
done
fi
done
Differential Revision: https://phabricator.services.mozilla.com/D55444
--HG--
extra : moz-landing-system : lando
Correctness improvements:
* UTF errors are handled safely per spec instead of dangerously truncating
strings.
* There are fewer converter implementations.
Performance improvements:
* The old code did exact buffer length math, which meant doing UTF math twice
on each input string (once for length calculation and another time for
conversion). Exact length math is more complicated when handling errors
properly, which the old code didn't do. The new code does UTF math on the
string content only once (when converting) but risks allocating more than
once. There are heuristics in place to lower the probability of
reallocation in cases where the double math avoidance isn't enough of a
saving to absorb an allocation and memcpy.
* Previously, in UTF-16 <-> UTF-8 conversions, an ASCII prefix was optimized
but a single non-ASCII code point pessimized the rest of the string. The
new code tries to get back on the fast ASCII path.
* UTF-16 to Latin1 conversion guarantees less about handling of out-of-range
input to eliminate an operation from the inner loop on x86/x86_64.
* When assigning to a pre-existing string, the new code tries to reuse the
old buffer instead of first releasing the old buffer and then allocating a
new one.
* When reallocating from the new code, the memcpy covers only the data that
is part of the logical length of the old string instead of memcpying the
whole capacity. (For old callers old excess memcpy behavior is preserved
due to bogus callers. See bug 1472113.)
* UTF-8 strings in XPConnect that are in the Latin1 range are passed to
SpiderMonkey as Latin1.
New features:
* Conversion between UTF-8 and Latin1 is added in order to enable faster
future interop between Rust code (or otherwise UTF-8-using code) and text
node and SpiderMonkey code that uses Latin1.
MozReview-Commit-ID: JaJuExfILM9
The GTK print portal is notified by the observer service with 'print-to-file-finished'
topic. The print filename is used as an identifier of the target in case multiple
printing jobs are in progress.
MozReview-Commit-ID: 1BZKDcK5De3
--HG--
extra : rebase_source : 5234aea32097cff4fc9f74f1b522cd04b2be8db1
Since GTK 3.18.2, GTK allows setting job name with more than 255 bytes.
As result, CUPS received the IPP error. (RFC 2911, Section 4.3.1)
This patch will shorten print job name, if runtime GTK version is older than 3.18.2.
MozReview-Commit-ID: EfB87Bvo6hX
--HG--
extra : rebase_source : a070e99c783c471a7bf7d00efb3cc997ff617a5e
Since GTK 3.18.2, GTK allows setting job name with more than 255 bytes.
As result, CUPS received the IPP error. (RFC 2911, Section 4.3.1)
This patch will shorten print job name, if runtime GTK version is older than 3.18.2.
MozReview-Commit-ID: EfB87Bvo6hX
--HG--
extra : rebase_source : f502cd49b128aecce4d8268783377c46a63ad669
This avoids a lot of mismatches between nsAString and char16_t*, thus removing
many getter_Copies() and ToNewUnicode() and get() calls, and generally making
things simpler.
Note: the patch removes GetDefaultPrinterNameFromGlobalPrinters() by simply
inlining it at its two callsites, which is easy with the changed types.
--HG--
extra : rebase_source : 9ab9b3694f093fc9b22c7f8e2394a98674d76c11
nsXPIDLStrings are marked as VOIDED upon initialization. Most of these local
nsXPIDLString variables are immediately set via getter_Copies(), which will
either assign a string value (using Adopt()) or do SetIsVoid(). These can be
trivially converted to nsString, which will get the same treatment.
The patch suitably converts the remaining nsXPIDLString local variable as well.
--HG--
extra : rebase_source : 5fff9f2c6844559198f601853f8db08564add7d5
This also changes aPrintToFileName parameter for BeginDocument to an nsAString& from char16_t*.
Having a char16_t* caused a pain with VS2105 where wchar_t != char16_t (as on VS2103), after it had been sent over IPDL.
This could have been worked around with casting, but this seemed like the tidier solution.
This also changes aPrintToFileName parameter for BeginDocument to an nsAString& from char16_t*.
Having a char16_t* caused a pain with VS2105 where wchar_t != char16_t (as on VS2103), after it had been sent over IPDL.
This could have been worked around with casting, but this seemed like the tidier solution.
The bulk of this commit was generated with a script, executed at the top
level of a typical source code checkout. The only non-machine-generated
part was modifying MFBT's moz.build to reflect the new naming.
CLOSED TREE makes big refactorings like this a piece of cake.
# The main substitution.
find . -name '*.cpp' -o -name '*.cc' -o -name '*.h' -o -name '*.mm' -o -name '*.idl'| \
xargs perl -p -i -e '
s/nsRefPtr\.h/RefPtr\.h/g; # handle includes
s/nsRefPtr ?</RefPtr</g; # handle declarations and variables
'
# Handle a special friend declaration in gfx/layers/AtomicRefCountedWithFinalize.h.
perl -p -i -e 's/::nsRefPtr;/::RefPtr;/' gfx/layers/AtomicRefCountedWithFinalize.h
# Handle nsRefPtr.h itself, a couple places that define constructors
# from nsRefPtr, and code generators specially. We do this here, rather
# than indiscriminantly s/nsRefPtr/RefPtr/, because that would rename
# things like nsRefPtrHashtable.
perl -p -i -e 's/nsRefPtr/RefPtr/g' \
mfbt/nsRefPtr.h \
xpcom/glue/nsCOMPtr.h \
xpcom/base/OwningNonNull.h \
ipc/ipdl/ipdl/lower.py \
ipc/ipdl/ipdl/builtin.py \
dom/bindings/Codegen.py \
python/lldbutils/lldbutils/utils.py
# In our indiscriminate substitution above, we renamed
# nsRefPtrGetterAddRefs, the class behind getter_AddRefs. Fix that up.
find . -name '*.cpp' -o -name '*.h' -o -name '*.idl' | \
xargs perl -p -i -e 's/nsRefPtrGetterAddRefs/RefPtrGetterAddRefs/g'
if [ -d .git ]; then
git mv mfbt/nsRefPtr.h mfbt/RefPtr.h
else
hg mv mfbt/nsRefPtr.h mfbt/RefPtr.h
fi
--HG--
rename : mfbt/nsRefPtr.h => mfbt/RefPtr.h
GTK versions prior to 2.24 incorrectly advertise themselves as able to print PDFs,
even when they can't. We were wholesale setting the output format to PostScript for
these older GTK versions, without giving the user the opportunity to override
it. We now lazily determine whether or not the output should be in PostScript,
which should give the user the opportunity to override.
--HG--
extra : commitid : A30C51CukFd
extra : rebase_source : 8800e463753a554902cc22fe6e973dfdab1d7c0d
extra : amend_source : 43b58fd7c2c1605351cbb24d216fb5f781625a3a
Before, we were calling nsDeviceContextSpecGTK::StartPrintJob within the
gtk_enumerate_printers callback function as soon as we found the printer
we wanted to print from. This was causing the GTK printing backend to get
confused about what the capabilities of the selected printer were when running
in the content process, due to https://bugzilla.gnome.org/show_bug.cgi?id=753041.
This moves the call to StartPrintJob to the next tick of the event loop.
--HG--
extra : commitid : CZ5P0hh51QC
extra : rebase_source : 279c6c56a2a22b42d5bbf094fd976a4d8f9c8031
There are no default pref values, and even if some have been set, the value
is subsequently overridden by the print.print_to_filename pref, which exists
if saved from a previous nsPrintSettingsGTK.
--HG--
extra : rebase_source : 6912584e537d77d4efb1b1c3716d6c38bda3899e
In the nsPrintSettingsGTK constructor, gtk_paper_size_new(nullptr) gets the
system default paper size from the locale and gtk_page_setup_new() sets
default orientation to portrait.
These are subsequently overridden by prefs if any have been saved from
a previous nsPrintSettingsGTK.
--HG--
extra : rebase_source : 37b626bb0ed93454f6adc8916dbc674cf37ed4fe
This is straightforward mapping of PR_LOG levels to their LogLevel
counterparts:
PR_LOG_ERROR -> LogLevel::Error
PR_LOG_WARNING -> LogLevel::Warning
PR_LOG_WARN -> LogLevel::Warning
PR_LOG_INFO -> LogLevel::Info
PR_LOG_DEBUG -> LogLevel::Debug
PR_LOG_NOTICE -> LogLevel::Debug
PR_LOG_VERBOSE -> LogLevel::Verbose
Instances of PRLogModuleLevel were mapped to a fully qualified
mozilla::LogLevel, instances of PR_LOG levels in #defines were mapped to a
fully qualified mozilla::LogLevel::* level, and all other instances were
mapped to us a shorter format of LogLevel::*.
Bustage for usage of the non-fully qualified LogLevel were fixed by adding
|using mozilla::LogLevel;| where appropriate.
Simon Giesecke
Bogdan Tara
Gabriele Svelto
Sylvestre Ledru
Henri Sivonen
Jan Horak
Jonathan Watt
Bob Owen
Mantaroh Yoshinaga
Phil Ringnalda
Nicholas Nethercote
Bill McCloskey
Carsten "Tomcat" Book
Gaith
Masatoshi Kimura
Ryan Hunt
Sebastian Hengst
Nicolas Silva
Andrew Comminos
Kyle Huey
Wes Kocher
Nathan Froyd
Mike Conley
Birunthan Mohanathas
Karl Tomlinson
Eric Rahm