/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ /* ***** BEGIN LICENSE BLOCK ***** * Version: NPL 1.1/GPL 2.0/LGPL 2.1 * * The contents of this file are subject to the Netscape Public License * Version 1.1 (the "License"); you may not use this file except in * compliance with the License. You may obtain a copy of the License at * http://www.mozilla.org/NPL/ * * Software distributed under the License is distributed on an "AS IS" basis, * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License * for the specific language governing rights and limitations under the * License. * * The Original Code is mozilla.org code. * * The Initial Developer of the Original Code is * Netscape Communications Corporation. * Portions created by the Initial Developer are Copyright (C) 1998 * the Initial Developer. All Rights Reserved. * * Contributor(s): * Roland Mainz * * * Alternatively, the contents of this file may be used under the terms of * either the GNU General Public License Version 2 or later (the "GPL"), or * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), * in which case the provisions of the GPL or the LGPL are applicable instead * of those above. If you wish to allow use of your version of this file only * under the terms of either the GPL or the LGPL, and not to allow others to * use your version of this file under the terms of the NPL, indicate your * decision by deleting the provisions above and replace them with the notice * and other provisions required by the GPL or the LGPL. If you do not delete * the provisions above, a recipient may use your version of this file under * the terms of any one of the NPL, the GPL or the LGPL. * * ***** END LICENSE BLOCK ***** */ #ifndef nsIDeviceContext_h___ #define nsIDeviceContext_h___ #include "nsISupports.h" #include "nsCoord.h" #include "nsRect.h" #include "nsIWidget.h" #include "nsIRenderingContext.h" class nsIView; class nsIFontMetrics; class nsIWidget; class nsIDeviceContextSpec; class nsIAtom; struct nsFont; struct nsColor; //a cross platform way of specifying a native device context typedef void * nsNativeDeviceContext; /* error codes for printer device contexts */ #define NS_ERROR_GFX_PRINTER_BASE (1) /* adjustable :-) */ /* Unix: print command (lp/lpr) not found */ #define NS_ERROR_GFX_PRINTER_CMD_NOT_FOUND \ NS_ERROR_GENERATE_FAILURE(NS_ERROR_MODULE_GFX,NS_ERROR_GFX_PRINTER_BASE+1) /* Unix: print command returned an error */ #define NS_ERROR_GFX_PRINTER_CMD_FAILURE \ NS_ERROR_GENERATE_FAILURE(NS_ERROR_MODULE_GFX,NS_ERROR_GFX_PRINTER_BASE+2) /* no printer available (e.g. cannot find _any_ printer) */ #define NS_ERROR_GFX_PRINTER_NO_PRINTER_AVAILABLE \ NS_ERROR_GENERATE_FAILURE(NS_ERROR_MODULE_GFX,NS_ERROR_GFX_PRINTER_BASE+3) /* _specified_ (by name) printer not found */ #define NS_ERROR_GFX_PRINTER_NAME_NOT_FOUND \ NS_ERROR_GENERATE_FAILURE(NS_ERROR_MODULE_GFX,NS_ERROR_GFX_PRINTER_BASE+4) /* access to printer denied */ #define NS_ERROR_GFX_PRINTER_ACCESS_DENIED \ NS_ERROR_GENERATE_FAILURE(NS_ERROR_MODULE_GFX,NS_ERROR_GFX_PRINTER_BASE+5) /* invalid printer attribute (for example: unsupported paper size etc.) */ #define NS_ERROR_GFX_PRINTER_INVALID_ATTRIBUTE \ NS_ERROR_GENERATE_FAILURE(NS_ERROR_MODULE_GFX,NS_ERROR_GFX_PRINTER_BASE+6) /* printer not "ready" (offline ?) */ #define NS_ERROR_GFX_PRINTER_PRINTER_NOT_READY \ NS_ERROR_GENERATE_FAILURE(NS_ERROR_MODULE_GFX,NS_ERROR_GFX_PRINTER_BASE+8) /* printer out of paper */ #define NS_ERROR_GFX_PRINTER_OUT_OF_PAPER \ NS_ERROR_GENERATE_FAILURE(NS_ERROR_MODULE_GFX,NS_ERROR_GFX_PRINTER_BASE+9) /* generic printer I/O error */ #define NS_ERROR_GFX_PRINTER_PRINTER_IO_ERROR \ NS_ERROR_GENERATE_FAILURE(NS_ERROR_MODULE_GFX,NS_ERROR_GFX_PRINTER_BASE+10) /* print-to-file: could not open output file */ #define NS_ERROR_GFX_PRINTER_COULD_NOT_OPEN_FILE \ NS_ERROR_GENERATE_FAILURE(NS_ERROR_MODULE_GFX,NS_ERROR_GFX_PRINTER_BASE+11) /* print-to-file: I/O error while printing to file */ #define NS_ERROR_GFX_PRINTER_FILE_IO_ERROR \ NS_ERROR_GENERATE_FAILURE(NS_ERROR_MODULE_GFX,NS_ERROR_GFX_PRINTER_BASE+12) /* print preview: needs at least one printer */ #define NS_ERROR_GFX_PRINTER_PRINTPREVIEW \ NS_ERROR_GENERATE_FAILURE(NS_ERROR_MODULE_GFX,NS_ERROR_GFX_PRINTER_BASE+13) /* print: starting document */ #define NS_ERROR_GFX_PRINTER_STARTDOC \ NS_ERROR_GENERATE_FAILURE(NS_ERROR_MODULE_GFX,NS_ERROR_GFX_PRINTER_BASE+14) /* print: ending document */ #define NS_ERROR_GFX_PRINTER_ENDDOC \ NS_ERROR_GENERATE_FAILURE(NS_ERROR_MODULE_GFX,NS_ERROR_GFX_PRINTER_BASE+15) /* print: starting page */ #define NS_ERROR_GFX_PRINTER_STARTPAGE \ NS_ERROR_GENERATE_FAILURE(NS_ERROR_MODULE_GFX,NS_ERROR_GFX_PRINTER_BASE+16) /* print: ending page */ #define NS_ERROR_GFX_PRINTER_ENDPAGE \ NS_ERROR_GENERATE_FAILURE(NS_ERROR_MODULE_GFX,NS_ERROR_GFX_PRINTER_BASE+17) /* print: print while in print preview */ #define NS_ERROR_GFX_PRINTER_PRINT_WHILE_PREVIEW \ NS_ERROR_GENERATE_FAILURE(NS_ERROR_MODULE_GFX,NS_ERROR_GFX_PRINTER_BASE+18) /* requested page size not supported by printer */ #define NS_ERROR_GFX_PRINTER_PAPER_SIZE_NOT_SUPPORTED \ NS_ERROR_GENERATE_FAILURE(NS_ERROR_MODULE_GFX,NS_ERROR_GFX_PRINTER_BASE+19) /* requested page orientation not supported */ #define NS_ERROR_GFX_PRINTER_ORIENTATION_NOT_SUPPORTED \ NS_ERROR_GENERATE_FAILURE(NS_ERROR_MODULE_GFX,NS_ERROR_GFX_PRINTER_BASE+20) /* requested colorspace not supported (like printing "color" on a "grayscale"-only printer) */ #define NS_ERROR_GFX_PRINTER_COLORSPACE_NOT_SUPPORTED \ NS_ERROR_GENERATE_FAILURE(NS_ERROR_MODULE_GFX,NS_ERROR_GFX_PRINTER_BASE+21) /* too many copies requested */ #define NS_ERROR_GFX_PRINTER_TOO_MANY_COPIES \ NS_ERROR_GENERATE_FAILURE(NS_ERROR_MODULE_GFX,NS_ERROR_GFX_PRINTER_BASE+22) /* driver configuration error */ #define NS_ERROR_GFX_PRINTER_DRIVER_CONFIGURATION_ERROR \ NS_ERROR_GENERATE_FAILURE(NS_ERROR_MODULE_GFX,NS_ERROR_GFX_PRINTER_BASE+23) /* Xprint module specific: Xprt server broken */ #define NS_ERROR_GFX_PRINTER_XPRINT_BROKEN_XPRT \ NS_ERROR_GENERATE_FAILURE(NS_ERROR_MODULE_GFX,NS_ERROR_GFX_PRINTER_BASE+24) /* The document is still being loaded, can't Print Preview */ #define NS_ERROR_GFX_PRINTER_DOC_IS_BUSY_PP \ NS_ERROR_GENERATE_FAILURE(NS_ERROR_MODULE_GFX,NS_ERROR_GFX_PRINTER_BASE+25) /* The document was asked to be destroyed while we were preparing printing */ #define NS_ERROR_GFX_PRINTER_DOC_WAS_DESTORYED \ NS_ERROR_GENERATE_FAILURE(NS_ERROR_MODULE_GFX,NS_ERROR_GFX_PRINTER_BASE+26) /* Cannot Print or Print Preview XUL Documents */ #define NS_ERROR_GFX_PRINTER_NO_XUL \ NS_ERROR_GENERATE_FAILURE(NS_ERROR_MODULE_GFX,NS_ERROR_GFX_PRINTER_BASE+27) /** * Conts need for Print Preview */ #ifdef NS_PRINT_PREVIEW const PRUint8 kUseAltDCFor_NONE = 0x00; // Do not use the AltDC for anything const PRUint8 kUseAltDCFor_FONTMETRICS = 0x01; // Use it for only getting the font metrics const PRUint8 kUseAltDCFor_CREATERC_REFLOW = 0x02; // Use when creating RenderingContexts for Reflow const PRUint8 kUseAltDCFor_CREATERC_PAINT = 0x04; // Use when creating RenderingContexts for Painting const PRUint8 kUseAltDCFor_SURFACE_DIM = 0x08; // Use it for getting the Surface Dimensions #endif #define NS_IDEVICE_CONTEXT_IID \ { 0x5931c580, 0xb917, 0x11d1, \ { 0xa8, 0x24, 0x00, 0x40, 0x95, 0x9a, 0x28, 0xc9 } } //a cross platform way of specifying a native palette handle typedef void * nsPalette; //structure used to return information about a device's palette capabilities struct nsPaletteInfo { PRPackedBool isPaletteDevice; PRUint16 sizePalette; // number of entries in the palette PRUint16 numReserved; // number of reserved palette entries nsPalette palette; // native palette handle }; typedef enum { eSystemFont_Caption, // css2 eSystemFont_Icon, eSystemFont_Menu, eSystemFont_MessageBox, eSystemFont_SmallCaption, eSystemFont_StatusBar, eSystemFont_Window, // css3 eSystemFont_Document, eSystemFont_Workspace, eSystemFont_Desktop, eSystemFont_Info, eSystemFont_Dialog, eSystemFont_Button, eSystemFont_PullDownMenu, eSystemFont_List, eSystemFont_Field, eSystemFont_Tooltips, // moz eSystemFont_Widget } nsSystemFontID; class nsIDeviceContext : public nsISupports { public: NS_DEFINE_STATIC_IID_ACCESSOR(NS_IDEVICE_CONTEXT_IID) /** * Initialize the device context from a widget * @param aWidget a native widget to initialize the device context from * @return error status */ NS_IMETHOD Init(nsNativeWidget aWidget) = 0; /** * Create a rendering context and initialize it from an nsIView * @param aView view to initialize context from * @param aContext out parameter for new rendering context * @return error status */ NS_IMETHOD CreateRenderingContext(nsIView *aView, nsIRenderingContext *&aContext) = 0; /** * Create a rendering context and initialize it from an nsIWidget * @param aWidget widget to initialize context from * @param aContext out parameter for new rendering context * @return error status */ NS_IMETHOD CreateRenderingContext(nsIWidget *aWidget, nsIRenderingContext *&aContext) = 0; /** * Create a rendering context and initialize it. This API should *only* be called * on device contexts whose SupportsNativeWidgets() method return PR_FALSE. * @param aContext out parameter for new rendering context * @return error status */ NS_IMETHOD CreateRenderingContext(nsIRenderingContext *&aContext) = 0; /** * Initialize a rendering context from a widget. This method is only for use * when a rendering context was obtained directly from a factory rather than * through one of the Create* methods above. * @param aContext rendering context to initialize * @param aWindow widget to initialize context from * @return error status */ NS_IMETHOD InitRenderingContext(nsIRenderingContext *aContext, nsIWidget *aWindow) = 0; /** * Query the device to see if it supports native widgets. If not, then * nsIWidget->Create() calls should be avoided. * @param aSupportsWidgets out paramater. If PR_TRUE, then native widgets * can be created. * @return error status */ NS_IMETHOD SupportsNativeWidgets(PRBool &aSupportsWidgets) = 0; /** * Obtain the size of a device unit relative to a Twip. A twip is 1/20 of * a point (which is 1/72 of an inch). * @param aDevUnitsToTwips out parameter for conversion value * @return error status */ NS_IMETHOD GetDevUnitsToTwips(float &aDevUnitsToTwips) const = 0; /** * Obtain the size of a Twip relative to a device unit. * @param aTwipsToDevUnits out parameter for conversion value * @return error status */ NS_IMETHOD GetTwipsToDevUnits(float &aTwipsToDevUnits) const = 0; /** * Set the scale factor to convert units used by the application * to device units. Typically, an application will query the device * for twips to device units scale and then set the scale * to convert from whatever unit the application wants to use * to device units. From that point on, all other parts of the * app can use the Get* methods below to figure out how * to convert device units <-> app units. * @param aAppUnits scale value to convert from application defined * units to device units. * @return error status */ NS_IMETHOD SetAppUnitsToDevUnits(float aAppUnits) = 0; /** * Set the scale factor to convert device units to units * used by the application. This should generally be * 1.0f / the value passed into SetAppUnitsToDevUnits(). * @param aDevUnits scale value to convert from device units to * application defined units * @return error status */ NS_IMETHOD SetDevUnitsToAppUnits(float aDevUnits) = 0; /** * Get the scale factor to convert from application defined * units to device units. * @param aAppUnits out paramater for scale value * @return error status */ NS_IMETHOD GetAppUnitsToDevUnits(float &aAppUnits) const = 0; /** * Get the scale factor to convert from device units to * application defined units. * @param aDevUnits out paramater for scale value * @return error status */ NS_IMETHOD GetDevUnitsToAppUnits(float &aDevUnits) const = 0; /** * Get the value used to scale a "standard" pixel to a pixel * of the same physical size for this device. a standard pixel * is defined as a pixel on display 0. this is used to make * sure that entities defined in pixel dimensions maintain a * constant relative size when displayed from one output * device to another. * @param aScale out parameter for scale value * @return error status */ NS_IMETHOD GetCanonicalPixelScale(float &aScale) const = 0; /** * Get the value used to scale a "standard" pixel to a pixel * of the same physical size for this device. a standard pixel * is defined as a pixel on display 0. this is used to make * sure that entities defined in pixel dimensions maintain a * constant relative size when displayed from one output * device to another. * @param aScale in parameter for scale value * @return error status */ NS_IMETHOD SetCanonicalPixelScale(float aScale) = 0; /** * Get the width of a vertical scroll bar and the height * of a horizontal scrollbar in application units. * @param aWidth out parameter for width * @param aHeight out parameter for height * @return error status */ NS_IMETHOD GetScrollBarDimensions(float &aWidth, float &aHeight) const = 0; /** * Fill in an nsFont based on the ID of a system font. This function * may or may not fill in the size, so the size should be set to a * reasonable default before calling. * * @param aID The system font ID. * @param aInfo The font structure to be filled in. * @return error status */ NS_IMETHOD GetSystemFont(nsSystemFontID aID, nsFont *aFont) const = 0; /** * Get the nsIFontMetrics that describe the properties of * an nsFont. * @param aFont font description to obtain metrics for * @param aLangGroup the language group of the document * @param aMetrics out parameter for font metrics * @return error status */ NS_IMETHOD GetMetricsFor(const nsFont& aFont, nsIAtom* aLangGroup, nsIFontMetrics*& aMetrics) = 0; /** * Get the nsIFontMetrics that describe the properties of * an nsFont. * @param aFont font description to obtain metrics for * @param aMetrics out parameter for font metrics * @return error status */ NS_IMETHOD GetMetricsFor(const nsFont& aFont, nsIFontMetrics*& aMetrics) = 0; //get and set the document zoom value used for display-time //scaling. default is 1.0 (no zoom) NS_IMETHOD SetZoom(float aZoom) = 0; NS_IMETHOD GetZoom(float &aZoom) const = 0; //get and set the text zoom value used for display-time scaling. //default is 1.0 (no zoom). The device context doesn't do anything //with this value. It's merely a convenient place to store it. NS_IMETHOD SetTextZoom(float aTextZoom) = 0; NS_IMETHOD GetTextZoom(float &aTextZoom) const = 0; //get a low level drawing surface for rendering. the rendering context //that is passed in is used to create the drawing surface if there isn't //already one in the device context. the drawing surface is then cached //in the device context for re-use. NS_IMETHOD GetDrawingSurface(nsIRenderingContext &aContext, nsDrawingSurface &aSurface) = 0; /** * Check to see if a particular named font exists. * @param aFontName character string of font face name * @return NS_OK if font is available, else font is unavailable */ NS_IMETHOD CheckFontExistence(const nsString& aFaceName) = 0; NS_IMETHOD FirstExistingFont(const nsFont& aFont, nsString& aFaceName) = 0; NS_IMETHOD GetLocalFontName(const nsString& aFaceName, nsString& aLocalName, PRBool& aAliased) = 0; /** * Notification when a font metrics instance created for this device is * about to be deleted */ NS_IMETHOD FontMetricsDeleted(const nsIFontMetrics* aFontMetrics) = 0; /** * Attempt to free up resoruces by flushing out any fonts no longer * referenced by anything other than the font cache itself. * @return error status */ NS_IMETHOD FlushFontCache(void) = 0; /** * Return the bit depth of the device. */ NS_IMETHOD GetDepth(PRUint32& aDepth) = 0; /** * Returns information about the device's palette capabilities. */ NS_IMETHOD GetPaletteInfo(nsPaletteInfo& aPaletteInfo) = 0; /** * Returns Platform specific pixel value for an RGB value */ NS_IMETHOD ConvertPixel(nscolor aColor, PRUint32 & aPixel) = 0; /** * Get the size of the displayable area of the output device * in app units. * @param aWidth out parameter for width * @param aHeight out parameter for height * @return error status */ NS_IMETHOD GetDeviceSurfaceDimensions(PRInt32 &aWidth, PRInt32 &aHeight) = 0; /** * Get the size of the content area of the output device in app units. * This corresponds on a screen device, for instance, to the entire screen. * @param aRect out parameter for full rect. Position (x,y) will be (0,0) or * relative to the primary monitor if this is not the primary. * @return error status */ NS_IMETHOD GetRect ( nsRect &aRect ) = 0; /** * Get the size of the content area of the output device in app units. * This corresponds on a screen device, for instance, to the area reported * by GetDeviceSurfaceDimensions, minus the taskbar (Windows) or menubar * (Macintosh). * @param aRect out parameter for client rect. Position (x,y) will be (0,0) * adjusted for any upper/left non-client space if present or * relative to the primary monitor if this is not the primary. * @return error status */ NS_IMETHOD GetClientRect(nsRect &aRect) = 0; /** * Returns a new nsIDeviceContext suitable for the device context * specification passed in. * @param aDevice a device context specification. this is a platform * specific structure that only a platform specific device * context can interpret. * @param aContext out parameter for new device context. nsnull on * failure to create new device context. * @return error status */ NS_IMETHOD GetDeviceContextFor(nsIDeviceContextSpec *aDevice, nsIDeviceContext *&aContext) = 0; //XXX need to work out re-entrancy issues for these APIs... MMP /** * Inform the output device that output of a document is beginning * Used for print related device contexts. Must be matched 1:1 with * EndDocument(). * XXX needs to take parameters so that feedback can be given to the * app regarding pagination progress and aborting print operations? * @return error status */ NS_IMETHOD BeginDocument(PRUnichar * aTitle) = 0; /** * Inform the output device that output of a document is ending. * Used for print related device contexts. Must be matched 1:1 with * BeginDocument() * @return error status */ NS_IMETHOD EndDocument(void) = 0; /** * Inform the output device that output of a document is being aborted. * Must be matched 1:1 with BeginDocument() * @return error status */ NS_IMETHOD AbortDocument(void) = 0; /** * Inform the output device that output of a page is beginning * Used for print related device contexts. Must be matched 1:1 with * EndPage() and within a BeginDocument()/EndDocument() pair. * @return error status */ NS_IMETHOD BeginPage(void) = 0; /** * Inform the output device that output of a page is ending * Used for print related device contexts. Must be matched 1:1 with * BeginPage() and within a BeginDocument()/EndDocument() pair. * @return error status */ NS_IMETHOD EndPage(void) = 0; #ifdef NS_PRINT_PREVIEW /** * Set an Alternative Device Context where some of the calls * are deferred to it */ NS_IMETHOD SetAltDevice(nsIDeviceContext* aAltDC) = 0; /** * Get the Alternate Device Context */ NS_IMETHOD GetAltDevice(nsIDeviceContext** aAltDC) = 0; /** * Turn on/off which types of information is retrived * via the alt device context */ NS_IMETHOD SetUseAltDC(PRUint8 aValue, PRBool aOn) = 0; #endif }; #endif /* nsIDeviceContext_h___ */