/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ /* ***** BEGIN LICENSE BLOCK ***** * Version: NPL 1.1/GPL 2.0/LGPL 2.1 * * The contents of this file are subject to the Netscape Public License * Version 1.1 (the "License"); you may not use this file except in * compliance with the License. You may obtain a copy of the License at * http://www.mozilla.org/NPL/ * * Software distributed under the License is distributed on an "AS IS" basis, * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License * for the specific language governing rights and limitations under the * License. * * The Original Code is Mozilla Communicator client code. * * The Initial Developer of the Original Code is * Netscape Communications Corporation. * Portions created by the Initial Developer are Copyright (C) 1998 * the Initial Developer. All Rights Reserved. * * Contributor(s): * * Alternatively, the contents of this file may be used under the terms of * either the GNU General Public License Version 2 or later (the "GPL"), or * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), * in which case the provisions of the GPL or the LGPL are applicable instead * of those above. If you wish to allow use of your version of this file only * under the terms of either the GPL or the LGPL, and not to allow others to * use your version of this file under the terms of the NPL, indicate your * decision by deleting the provisions above and replace them with the notice * and other provisions required by the GPL or the LGPL. If you do not delete * the provisions above, a recipient may use your version of this file under * the terms of any one of the NPL, the GPL or the LGPL. * * ***** END LICENSE BLOCK ***** */ #ifndef nsTextTransformer_h___ #define nsTextTransformer_h___ #include "nsTextFragment.h" #include "nsISupports.h" #include "nsIPresContext.h" #ifdef IBMBIDI #include "nsBidi.h" #include "nsBidiUtils.h" #endif class nsIContent; class nsIFrame; class nsILineBreaker; class nsIWordBreaker; // XXX I'm sure there are other special characters #define CH_NBSP 160 #define CH_ENSP 8194 // #define CH_EMSP 8195 // #define CH_THINSP 8291 // #define CH_ZWNJ 8204 // #define CH_LRM 8206 // #define CH_RLM 8207 // #define CH_LRE 8234 // #define CH_RLE 8235 // #define CH_PDF 8236 // #define CH_LRO 8237 // #define CH_RLO 8238 // #define IS_BIDI_CONTROL(_ch) \ (((_ch) >= CH_LRM && (_ch) <= CH_RLM) \ || ((_ch) >= CH_LRE && (_ch) <= CH_RLO)) #endif // IBMBIDI #define NS_TEXT_TRANSFORMER_AUTO_WORD_BUF_SIZE 128 // used to be 256 // Indicates whether the transformed text should be left as ascii #define NS_TEXT_TRANSFORMER_LEAVE_AS_ASCII 1 // If at any point during GetNextWord or GetPrevWord we // run across a multibyte (> 127) unicode character. #define NS_TEXT_TRANSFORMER_HAS_MULTIBYTE 2 // The text in the transform buffer is ascii #define NS_TEXT_TRANSFORMER_TRANSFORMED_TEXT_IS_ASCII 4 #ifdef IBMBIDI // The text in the transform buffer needs Arabic shaping #define NS_TEXT_TRANSFORMER_DO_ARABIC_SHAPING 8 // The text in the transform buffer needs numeric shaping #define NS_TEXT_TRANSFORMER_DO_NUMERIC_SHAPING 16 #endif // A growable text buffer that tries to avoid using malloc by having a // builtin buffer. Ideally used as an automatic variable. class nsAutoTextBuffer { public: nsAutoTextBuffer(); ~nsAutoTextBuffer(); nsresult GrowBy(PRInt32 aAtLeast, PRBool aCopyToHead = PR_TRUE); nsresult GrowTo(PRInt32 aNewSize, PRBool aCopyToHead = PR_TRUE); PRUnichar* GetBuffer() { return mBuffer; } PRUnichar* GetBufferEnd() { return mBuffer + mBufferLen; } PRInt32 GetBufferLength() const { return mBufferLen; } PRUnichar* mBuffer; PRInt32 mBufferLen; PRUnichar mAutoBuffer[NS_TEXT_TRANSFORMER_AUTO_WORD_BUF_SIZE]; }; //---------------------------------------- /** * This object manages the transformation of text: * * * * Note that no transformations are applied that would impact word * breaking (like mapping   into space, for example). In * addition, this logic will not strip leading or trailing whitespace * (across the entire run of text; leading whitespace can be skipped * for a frames text because of whitespace compression). */ class nsTextTransformer { public: // Note: The text transformer does not hold a reference to the line // breaker and work breaker objects nsTextTransformer(nsILineBreaker* aLineBreaker, nsIWordBreaker* aWordBreaker, nsIPresContext* aPresContext); ~nsTextTransformer(); /** * Initialize the text transform. Use GetNextWord() and GetPrevWord() * to iterate the text * * The default is to transform all text to Unicode; however, you can * specify that the text should be left as ascii if possible. Note that * we don't step the text down from Unicode to ascii (even if it doesn't * contain multibyte characters) so this only happens for text fragments * that contain 1-byte text. * XXX This is currently not implemented for GetPreviousWord() * @see TransformedTextIsAscii() */ nsresult Init(nsIFrame* aFrame, nsIContent* aContent, PRInt32 aStartingOffset, PRBool aLeaveAsAscii = PR_FALSE); PRInt32 GetContentLength() const { return mFrag ? mFrag->GetLength() : 0; } /** * Iterates the next word in the text fragment. * * Returns a pointer to the word, the number of characters in the word, the * content length of the word, whether it is whitespace, and whether the * text was transformed (any of the transformations listed above). The content * length can be greater than the word length if whitespace compression occured * or if characters were discarded * * The default behavior is to reset the transform buffer to the beginning, * but you can choose to not reste it and buffer across multiple words */ PRUnichar* GetNextWord(PRBool aInWord, PRInt32* aWordLenResult, PRInt32* aContentLenResult, PRBool* aIsWhitespaceResult, PRBool* aWasTransformed, PRBool aResetTransformBuf = PR_TRUE, PRBool aForLineBreak = PR_TRUE); PRUnichar* GetPrevWord(PRBool aInWord, PRInt32* aWordLenResult, PRInt32* aContentLenResult, PRBool* aIsWhitespaceResult, PRBool aForLineBreak = PR_TRUE); // Returns PR_TRUE if the LEAVE_AS_ASCII flag is set PRBool LeaveAsAscii() const { return (mFlags & NS_TEXT_TRANSFORMER_LEAVE_AS_ASCII) != 0; } // Returns PR_TRUE if any of the characters are multibyte (greater than 127) PRBool HasMultibyte() const { return (mFlags & NS_TEXT_TRANSFORMER_HAS_MULTIBYTE) != 0; } // Returns PR_TRUE if the text in the transform bufer is ascii (i.e., it // doesn't contain any multibyte characters) PRBool TransformedTextIsAscii() const { return (mFlags & NS_TEXT_TRANSFORMER_TRANSFORMED_TEXT_IS_ASCII) != 0; } #ifdef IBMBIDI // Returns PR_TRUE if the text in the transform bufer needs Arabic // shaping PRBool NeedsArabicShaping() const { return (mFlags & NS_TEXT_TRANSFORMER_DO_ARABIC_SHAPING) != 0; } // Returns PR_TRUE if the text in the transform bufer needs numeric // shaping PRBool NeedsNumericShaping() const { return (mFlags & NS_TEXT_TRANSFORMER_DO_NUMERIC_SHAPING) != 0; } #endif // Set or clears the LEAVE_AS_ASCII bit void SetLeaveAsAscii(PRBool aValue) { aValue ? mFlags |= NS_TEXT_TRANSFORMER_LEAVE_AS_ASCII : mFlags &= (~NS_TEXT_TRANSFORMER_LEAVE_AS_ASCII); } // Set or clears the NS_TEXT_TRANSFORMER_HAS_MULTIBYTE bit void SetHasMultibyte(PRBool aValue) { aValue ? mFlags |= NS_TEXT_TRANSFORMER_HAS_MULTIBYTE : mFlags &= (~NS_TEXT_TRANSFORMER_HAS_MULTIBYTE); } // Set or clears the NS_TEXT_TRANSFORMER_TRANSFORMED_TEXT_IS_ASCII bit void SetTransformedTextIsAscii(PRBool aValue) { aValue ? mFlags |= NS_TEXT_TRANSFORMER_TRANSFORMED_TEXT_IS_ASCII : mFlags &= (~NS_TEXT_TRANSFORMER_TRANSFORMED_TEXT_IS_ASCII); } #ifdef IBMBIDI // Set or clears the NS_TEXT_TRANSFORMER_TRANSFORMED_DO_ARABIC_SHAPING bit void SetNeedsArabicShaping(PRBool aValue) { aValue ? mFlags |= NS_TEXT_TRANSFORMER_DO_ARABIC_SHAPING : mFlags &= (~NS_TEXT_TRANSFORMER_DO_ARABIC_SHAPING); } // Set or clears the NS_TEXT_TRANSFORMER_TRANSFORMED_DO_NUMERIC_SHAPING bit void SetNeedsNumericShaping(PRBool aValue) { aValue ? mFlags |= NS_TEXT_TRANSFORMER_DO_NUMERIC_SHAPING : mFlags &= (~NS_TEXT_TRANSFORMER_DO_NUMERIC_SHAPING); } #endif PRUnichar* GetWordBuffer() { return mTransformBuf.GetBuffer(); } PRInt32 GetWordBufferLength() const { return mTransformBuf.GetBufferLength(); } static nsresult Initialize(); static void Shutdown(); protected: // Helper methods for GetNextWord (F == forwards) PRInt32 ScanNormalWhiteSpace_F(); PRInt32 ScanNormalAsciiText_F(PRInt32* aWordLen, PRBool* aWasTransformed); PRInt32 ScanNormalAsciiText_F_ForWordBreak(PRInt32* aWordLen, PRBool* aWasTransformed); PRInt32 ScanNormalUnicodeText_F(PRBool aForLineBreak, PRInt32* aWordLen, PRBool* aWasTransformed); PRInt32 ScanPreWrapWhiteSpace_F(PRInt32* aWordLen); PRInt32 ScanPreAsciiData_F(PRInt32* aWordLen, PRBool* aWasTransformed); PRInt32 ScanPreData_F(PRInt32* aWordLen, PRBool* aWasTransformed); // Helper methods for GetPrevWord (B == backwards) PRInt32 ScanNormalWhiteSpace_B(); PRInt32 ScanNormalAsciiText_B(PRInt32* aWordLen); PRInt32 ScanNormalUnicodeText_B(PRBool aForLineBreak, PRInt32* aWordLen); PRInt32 ScanPreWrapWhiteSpace_B(PRInt32* aWordLen); PRInt32 ScanPreData_B(PRInt32* aWordLen); // Converts the current text in the transform buffer from ascii to // Unicode void ConvertTransformedTextToUnicode(); void LanguageSpecificTransform(PRUnichar* aText, PRInt32 aLen, PRBool* aWasTransformed); #ifdef IBMBIDI void DoArabicShaping(PRUnichar* aText, PRInt32& aTextLength, PRBool* aWasTransformed); void DoNumericShaping(PRUnichar* aText, PRInt32& aTextLength, PRBool* aWasTransformed); #endif // The text fragment that we are looking at const nsTextFragment* mFrag; // Our current offset into the text fragment PRInt32 mOffset; // The frame's white-space mode we are using to process text enum { eNormal, ePreformatted, ePreWrap } mMode; nsILineBreaker* mLineBreaker; // [WEAK] nsIWordBreaker* mWordBreaker; // [WEAK] nsLanguageSpecificTransformType mLanguageSpecificTransformType; #ifdef IBMBIDI nsIPresContext* mPresContext; nsCharType mCharType; #endif // Buffer used to hold the transformed words from GetNextWord or // GetPrevWord nsAutoTextBuffer mTransformBuf; // Our current position within the buffer. Used when iterating the next // word, because we may be requested to buffer across multiple words PRInt32 mBufferPos; // The frame's text-transform state PRUint8 mTextTransform; // Flag for controling mLeaveAsAscii, mHasMultibyte, mTransformedTextIsAscii PRUint8 mFlags; // prefs used to configure the double-click word selection behavior static PRPackedBool sWordSelectPrefInited; // have we read the prefs yet? static PRPackedBool sWordSelectStopAtPunctuation; // should we stop at punctuation? #ifdef DEBUG static void SelfTest(nsILineBreaker* aLineBreaker, nsIWordBreaker* aWordBreaker, nsIPresContext* aPresContext); nsresult Init2(const nsTextFragment* aFrag, PRInt32 aStartingOffset, PRUint8 aWhiteSpace, PRUint8 aTextTransform); #endif }; #endif /* nsTextTransformer_h___ */