/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/* vim:set ts=4 sw=4 et cindent: */
/* This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/. */

#include "nsSocketTransport2.h"

#include "mozilla/Attributes.h"
#include "mozilla/Telemetry.h"
#include "nsIOService.h"
#include "nsStreamUtils.h"
#include "nsNetSegmentUtils.h"
#include "nsNetAddr.h"
#include "nsTransportUtils.h"
#include "nsProxyInfo.h"
#include "nsNetCID.h"
#include "nsNetUtil.h"
#include "nsAutoPtr.h"
#include "nsCOMPtr.h"
#include "plstr.h"
#include "prerr.h"
#include "NetworkActivityMonitor.h"
#include "NSSErrorsService.h"
#include "mozilla/dom/ToJSValue.h"
#include "mozilla/net/NeckoChild.h"
#include "nsThreadUtils.h"
#include "nsISocketProviderService.h"
#include "nsISocketProvider.h"
#include "nsISSLSocketControl.h"
#include "nsIPipe.h"
#include "nsIClassInfoImpl.h"
#include "nsURLHelper.h"
#include "nsIDNSService.h"
#include "nsIDNSRecord.h"
#include "nsICancelable.h"
#include "TCPFastOpenLayer.h"
#include <algorithm>

#include "nsPrintfCString.h"
#include "xpcpublic.h"

#if defined(XP_WIN)
#include "ShutdownLayer.h"
#endif

/* Following inclusions required for keepalive config not supported by NSPR. */
#include "private/pprio.h"
#if defined(XP_WIN)
#include <winsock2.h>
#include <mstcpip.h>
#elif defined(XP_UNIX)
#include <errno.h>
#include <netinet/tcp.h>
#endif
/* End keepalive config inclusions. */

#define SUCCESSFUL_CONNECTING_TO_IPV4_ADDRESS 0
#define UNSUCCESSFUL_CONNECTING_TO_IPV4_ADDRESS 1
#define SUCCESSFUL_CONNECTING_TO_IPV6_ADDRESS 2
#define UNSUCCESSFUL_CONNECTING_TO_IPV6_ADDRESS 3

//-----------------------------------------------------------------------------

static NS_DEFINE_CID(kSocketProviderServiceCID, NS_SOCKETPROVIDERSERVICE_CID);
static NS_DEFINE_CID(kDNSServiceCID, NS_DNSSERVICE_CID);

//-----------------------------------------------------------------------------

namespace mozilla {
namespace net {

class nsSocketEvent : public Runnable
{
public:
  nsSocketEvent(nsSocketTransport* transport,
                uint32_t type,
                nsresult status = NS_OK,
                nsISupports* param = nullptr)
    : Runnable("net::nsSocketEvent")
    , mTransport(transport)
    , mType(type)
    , mStatus(status)
    , mParam(param)
  {
  }

  NS_IMETHOD Run() override
  {
    mTransport->OnSocketEvent(mType, mStatus, mParam);
    return NS_OK;
    }

private:
    RefPtr<nsSocketTransport> mTransport;

    uint32_t              mType;
    nsresult              mStatus;
    nsCOMPtr<nsISupports> mParam;
};

//-----------------------------------------------------------------------------

//#define TEST_CONNECT_ERRORS
#ifdef TEST_CONNECT_ERRORS
#include <stdlib.h>
static PRErrorCode RandomizeConnectError(PRErrorCode code)
{
    //
    // To test out these errors, load http://www.yahoo.com/.  It should load
    // correctly despite the random occurrence of these errors.
    //
    int n = rand();
    if (n > RAND_MAX/2) {
        struct {
            PRErrorCode err_code;
            const char *err_name;
        }
        errors[] = {
            //
            // These errors should be recoverable provided there is another
            // IP address in mDNSRecord.
            //
            { PR_CONNECT_REFUSED_ERROR, "PR_CONNECT_REFUSED_ERROR" },
            { PR_CONNECT_TIMEOUT_ERROR, "PR_CONNECT_TIMEOUT_ERROR" },
            //
            // This error will cause this socket transport to error out;
            // however, if the consumer is HTTP, then the HTTP transaction
            // should be restarted when this error occurs.
            //
            { PR_CONNECT_RESET_ERROR, "PR_CONNECT_RESET_ERROR" },
        };
        n = n % (sizeof(errors)/sizeof(errors[0]));
        code = errors[n].err_code;
        SOCKET_LOG(("simulating NSPR error %d [%s]\n", code, errors[n].err_name));
    }
    return code;
}
#endif

//-----------------------------------------------------------------------------

nsresult
ErrorAccordingToNSPR(PRErrorCode errorCode)
{
    nsresult rv = NS_ERROR_FAILURE;
    switch (errorCode) {
    case PR_WOULD_BLOCK_ERROR:
        rv = NS_BASE_STREAM_WOULD_BLOCK;
        break;
    case PR_CONNECT_ABORTED_ERROR:
    case PR_CONNECT_RESET_ERROR:
        rv = NS_ERROR_NET_RESET;
        break;
    case PR_END_OF_FILE_ERROR: // XXX document this correlation
        rv = NS_ERROR_NET_INTERRUPT;
        break;
    case PR_CONNECT_REFUSED_ERROR:
    // We lump the following NSPR codes in with PR_CONNECT_REFUSED_ERROR. We
    // could get better diagnostics by adding distinct XPCOM error codes for
    // each of these, but there are a lot of places in Gecko that check
    // specifically for NS_ERROR_CONNECTION_REFUSED, all of which would need to
    // be checked.
    case PR_NETWORK_UNREACHABLE_ERROR:
    case PR_HOST_UNREACHABLE_ERROR:
    case PR_ADDRESS_NOT_AVAILABLE_ERROR:
    // Treat EACCES as a soft error since (at least on Linux) connect() returns
    // EACCES when an IPv6 connection is blocked by a firewall. See bug 270784.
    case PR_NO_ACCESS_RIGHTS_ERROR:
        rv = NS_ERROR_CONNECTION_REFUSED;
        break;
    case PR_ADDRESS_NOT_SUPPORTED_ERROR:
        rv = NS_ERROR_SOCKET_ADDRESS_NOT_SUPPORTED;
        break;
    case PR_IO_TIMEOUT_ERROR:
    case PR_CONNECT_TIMEOUT_ERROR:
        rv = NS_ERROR_NET_TIMEOUT;
        break;
    case PR_OUT_OF_MEMORY_ERROR:
    // These really indicate that the descriptor table filled up, or that the
    // kernel ran out of network buffers - but nobody really cares which part of
    // the system ran out of memory.
    case PR_PROC_DESC_TABLE_FULL_ERROR:
    case PR_SYS_DESC_TABLE_FULL_ERROR:
    case PR_INSUFFICIENT_RESOURCES_ERROR:
        rv = NS_ERROR_OUT_OF_MEMORY;
        break;
    case PR_ADDRESS_IN_USE_ERROR:
        rv = NS_ERROR_SOCKET_ADDRESS_IN_USE;
        break;
    // These filename-related errors can arise when using Unix-domain sockets.
    case PR_FILE_NOT_FOUND_ERROR:
        rv = NS_ERROR_FILE_NOT_FOUND;
        break;
    case PR_IS_DIRECTORY_ERROR:
        rv = NS_ERROR_FILE_IS_DIRECTORY;
        break;
    case PR_LOOP_ERROR:
        rv = NS_ERROR_FILE_UNRESOLVABLE_SYMLINK;
        break;
    case PR_NAME_TOO_LONG_ERROR:
        rv = NS_ERROR_FILE_NAME_TOO_LONG;
        break;
    case PR_NO_DEVICE_SPACE_ERROR:
        rv = NS_ERROR_FILE_NO_DEVICE_SPACE;
        break;
    case PR_NOT_DIRECTORY_ERROR:
        rv = NS_ERROR_FILE_NOT_DIRECTORY;
        break;
    case PR_READ_ONLY_FILESYSTEM_ERROR:
        rv = NS_ERROR_FILE_READ_ONLY;
        break;
    case PR_BAD_ADDRESS_ERROR:
        rv = NS_ERROR_UNKNOWN_HOST;
        break;
    default:
        if (psm::IsNSSErrorCode(errorCode)) {
            rv = psm::GetXPCOMFromNSSError(errorCode);
        }
        break;

    // NSPR's socket code can return these, but they're not worth breaking out
    // into their own error codes, distinct from NS_ERROR_FAILURE:
    //
    // PR_BAD_DESCRIPTOR_ERROR
    // PR_INVALID_ARGUMENT_ERROR
    // PR_NOT_SOCKET_ERROR
    // PR_NOT_TCP_SOCKET_ERROR
    //   These would indicate a bug internal to the component.
    //
    // PR_PROTOCOL_NOT_SUPPORTED_ERROR
    //   This means that we can't use the given "protocol" (like
    //   IPPROTO_TCP or IPPROTO_UDP) with a socket of the given type. As
    //   above, this indicates an internal bug.
    //
    // PR_IS_CONNECTED_ERROR
    //   This indicates that we've applied a system call like 'bind' or
    //   'connect' to a socket that is already connected. The socket
    //   components manage each file descriptor's state, and in some cases
    //   handle this error result internally. We shouldn't be returning
    //   this to our callers.
    //
    // PR_IO_ERROR
    //   This is so vague that NS_ERROR_FAILURE is just as good.
    }
    SOCKET_LOG(("ErrorAccordingToNSPR [in=%d out=%" PRIx32 "]\n", errorCode,
                static_cast<uint32_t>(rv)));
    return rv;
}

//-----------------------------------------------------------------------------
// socket input stream impl
//-----------------------------------------------------------------------------

nsSocketInputStream::nsSocketInputStream(nsSocketTransport *trans)
    : mTransport(trans)
    , mReaderRefCnt(0)
    , mCondition(NS_OK)
    , mCallbackFlags(0)
    , mByteCount(0)
{
}

nsSocketInputStream::~nsSocketInputStream()
{
}

// called on the socket transport thread...
//
//   condition : failure code if socket has been closed
//
void
nsSocketInputStream::OnSocketReady(nsresult condition)
{
    SOCKET_LOG(("nsSocketInputStream::OnSocketReady [this=%p cond=%" PRIx32 "]\n",
                this, static_cast<uint32_t>(condition)));

    MOZ_ASSERT(OnSocketThread(), "not on socket thread");

    nsCOMPtr<nsIInputStreamCallback> callback;
    {
        MutexAutoLock lock(mTransport->mLock);

        // update condition, but be careful not to erase an already
        // existing error condition.
        if (NS_SUCCEEDED(mCondition))
            mCondition = condition;

        // ignore event if only waiting for closure and not closed.
        if (NS_FAILED(mCondition) || !(mCallbackFlags & WAIT_CLOSURE_ONLY)) {
            callback = mCallback;
            mCallback = nullptr;
            mCallbackFlags = 0;
        }
    }

    if (callback)
        callback->OnInputStreamReady(this);
}

NS_IMPL_QUERY_INTERFACE(nsSocketInputStream,
                        nsIInputStream,
                        nsIAsyncInputStream)

NS_IMETHODIMP_(MozExternalRefCountType)
nsSocketInputStream::AddRef()
{
    ++mReaderRefCnt;
    return mTransport->AddRef();
}

NS_IMETHODIMP_(MozExternalRefCountType)
nsSocketInputStream::Release()
{
    if (--mReaderRefCnt == 0)
        Close();
    return mTransport->Release();
}

NS_IMETHODIMP
nsSocketInputStream::Close()
{
    return CloseWithStatus(NS_BASE_STREAM_CLOSED);
}

NS_IMETHODIMP
nsSocketInputStream::Available(uint64_t *avail)
{
    SOCKET_LOG(("nsSocketInputStream::Available [this=%p]\n", this));

    *avail = 0;

    PRFileDesc *fd;
    {
        MutexAutoLock lock(mTransport->mLock);

        if (NS_FAILED(mCondition))
            return mCondition;

        fd = mTransport->GetFD_Locked();
        if (!fd)
            return NS_OK;
    }

    // cannot hold lock while calling NSPR.  (worried about the fact that PSM
    // synchronously proxies notifications over to the UI thread, which could
    // mistakenly try to re-enter this code.)
    int32_t n = PR_Available(fd);

    // PSM does not implement PR_Available() so do a best approximation of it
    // with MSG_PEEK
    if ((n == -1) && (PR_GetError() == PR_NOT_IMPLEMENTED_ERROR)) {
        char c;

        n = PR_Recv(fd, &c, 1, PR_MSG_PEEK, 0);
        SOCKET_LOG(("nsSocketInputStream::Available [this=%p] "
                    "using PEEK backup n=%d]\n", this, n));
    }

    nsresult rv;
    {
        MutexAutoLock lock(mTransport->mLock);

        mTransport->ReleaseFD_Locked(fd);

        if (n >= 0)
            *avail = n;
        else {
            PRErrorCode code = PR_GetError();
            if (code == PR_WOULD_BLOCK_ERROR)
                return NS_OK;
            mCondition = ErrorAccordingToNSPR(code);
        }
        rv = mCondition;
    }
    if (NS_FAILED(rv))
        mTransport->OnInputClosed(rv);
    return rv;
}

NS_IMETHODIMP
nsSocketInputStream::Read(char *buf, uint32_t count, uint32_t *countRead)
{
    SOCKET_LOG(("nsSocketInputStream::Read [this=%p count=%u]\n", this, count));

    *countRead = 0;

    PRFileDesc* fd = nullptr;
    {
        MutexAutoLock lock(mTransport->mLock);

        if (NS_FAILED(mCondition))
            return (mCondition == NS_BASE_STREAM_CLOSED) ? NS_OK : mCondition;

        fd = mTransport->GetFD_Locked();
        if (!fd)
            return NS_BASE_STREAM_WOULD_BLOCK;
    }

    SOCKET_LOG(("  calling PR_Read [count=%u]\n", count));

    // cannot hold lock while calling NSPR.  (worried about the fact that PSM
    // synchronously proxies notifications over to the UI thread, which could
    // mistakenly try to re-enter this code.)
    int32_t n = PR_Read(fd, buf, count);

    SOCKET_LOG(("  PR_Read returned [n=%d]\n", n));

    nsresult rv = NS_OK;
    {
        MutexAutoLock lock(mTransport->mLock);

#ifdef ENABLE_SOCKET_TRACING
        if (n > 0)
            mTransport->TraceInBuf(buf, n);
#endif

        mTransport->ReleaseFD_Locked(fd);

        if (n > 0)
            mByteCount += (*countRead = n);
        else if (n < 0) {
            PRErrorCode code = PR_GetError();
            if (code == PR_WOULD_BLOCK_ERROR)
                return NS_BASE_STREAM_WOULD_BLOCK;
            mCondition = ErrorAccordingToNSPR(code);
        }
        rv = mCondition;
    }
    if (NS_FAILED(rv))
        mTransport->OnInputClosed(rv);

    // only send this notification if we have indeed read some data.
    // see bug 196827 for an example of why this is important.
    if (n > 0)
        mTransport->SendStatus(NS_NET_STATUS_RECEIVING_FROM);
    return rv;
}

NS_IMETHODIMP
nsSocketInputStream::ReadSegments(nsWriteSegmentFun writer, void *closure,
                                  uint32_t count, uint32_t *countRead)
{
    // socket stream is unbuffered
    return NS_ERROR_NOT_IMPLEMENTED;
}

NS_IMETHODIMP
nsSocketInputStream::IsNonBlocking(bool *nonblocking)
{
    *nonblocking = true;
    return NS_OK;
}

NS_IMETHODIMP
nsSocketInputStream::CloseWithStatus(nsresult reason)
{
    SOCKET_LOG(("nsSocketInputStream::CloseWithStatus [this=%p reason=%" PRIx32 "]\n", this,
               static_cast<uint32_t>(reason)));

    // may be called from any thread

    nsresult rv;
    {
        MutexAutoLock lock(mTransport->mLock);

        if (NS_SUCCEEDED(mCondition))
            rv = mCondition = reason;
        else
            rv = NS_OK;
    }
    if (NS_FAILED(rv))
        mTransport->OnInputClosed(rv);
    return NS_OK;
}

NS_IMETHODIMP
nsSocketInputStream::AsyncWait(nsIInputStreamCallback *callback,
                               uint32_t flags,
                               uint32_t amount,
                               nsIEventTarget *target)
{
    SOCKET_LOG(("nsSocketInputStream::AsyncWait [this=%p]\n", this));

    bool hasError = false;
    {
        MutexAutoLock lock(mTransport->mLock);

        if (callback && target) {
            //
            // build event proxy
            //
            mCallback = NS_NewInputStreamReadyEvent("nsSocketInputStream::AsyncWait",
                                                    callback, target);
        }
        else
            mCallback = callback;
        mCallbackFlags = flags;

        hasError = NS_FAILED(mCondition);
    } // unlock mTransport->mLock

    if (hasError) {
        // OnSocketEvent will call OnInputStreamReady with an error code after
        // going through the event loop. We do this because most socket callers
        // do not expect AsyncWait() to synchronously execute the OnInputStreamReady
        // callback.
        mTransport->PostEvent(nsSocketTransport::MSG_INPUT_PENDING);
    } else {
        mTransport->OnInputPending();
    }

    return NS_OK;
}

//-----------------------------------------------------------------------------
// socket output stream impl
//-----------------------------------------------------------------------------

nsSocketOutputStream::nsSocketOutputStream(nsSocketTransport *trans)
    : mTransport(trans)
    , mWriterRefCnt(0)
    , mCondition(NS_OK)
    , mCallbackFlags(0)
    , mByteCount(0)
{
}

nsSocketOutputStream::~nsSocketOutputStream()
{
}

// called on the socket transport thread...
//
//   condition : failure code if socket has been closed
//
void
nsSocketOutputStream::OnSocketReady(nsresult condition)
{
    SOCKET_LOG(("nsSocketOutputStream::OnSocketReady [this=%p cond=%" PRIx32 "]\n",
                this, static_cast<uint32_t>(condition)));

    MOZ_ASSERT(OnSocketThread(), "not on socket thread");

    nsCOMPtr<nsIOutputStreamCallback> callback;
    {
        MutexAutoLock lock(mTransport->mLock);

        // update condition, but be careful not to erase an already
        // existing error condition.
        if (NS_SUCCEEDED(mCondition))
            mCondition = condition;

        // ignore event if only waiting for closure and not closed.
        if (NS_FAILED(mCondition) || !(mCallbackFlags & WAIT_CLOSURE_ONLY)) {
            callback = mCallback;
            mCallback = nullptr;
            mCallbackFlags = 0;
        }
    }

    if (callback)
        callback->OnOutputStreamReady(this);
}

NS_IMPL_QUERY_INTERFACE(nsSocketOutputStream,
                        nsIOutputStream,
                        nsIAsyncOutputStream)

NS_IMETHODIMP_(MozExternalRefCountType)
nsSocketOutputStream::AddRef()
{
    ++mWriterRefCnt;
    return mTransport->AddRef();
}

NS_IMETHODIMP_(MozExternalRefCountType)
nsSocketOutputStream::Release()
{
    if (--mWriterRefCnt == 0)
        Close();
    return mTransport->Release();
}

NS_IMETHODIMP
nsSocketOutputStream::Close()
{
    return CloseWithStatus(NS_BASE_STREAM_CLOSED);
}

NS_IMETHODIMP
nsSocketOutputStream::Flush()
{
    return NS_OK;
}

NS_IMETHODIMP
nsSocketOutputStream::Write(const char *buf, uint32_t count, uint32_t *countWritten)
{
    SOCKET_LOG(("nsSocketOutputStream::Write [this=%p count=%u]\n", this, count));

    *countWritten = 0;

    // A write of 0 bytes can be used to force the initial SSL handshake, so do
    // not reject that.

    PRFileDesc* fd = nullptr;
    bool fastOpenInProgress;
    {
        MutexAutoLock lock(mTransport->mLock);

        if (NS_FAILED(mCondition))
            return mCondition;

        fd = mTransport->GetFD_LockedAlsoDuringFastOpen();
        if (!fd)
            return NS_BASE_STREAM_WOULD_BLOCK;

        fastOpenInProgress = mTransport->FastOpenInProgress();
    }

    if (fastOpenInProgress) {
        // If we are in the fast open phase, we should not write more data
        // than TCPFastOpenLayer can accept. If we write more data, this data
        // will be buffered in tls and we want to avoid that.
        uint32_t availableSpace = TCPFastOpenGetBufferSizeLeft(fd);
        count = (count > availableSpace) ? availableSpace : count;
        if (!count) {
            {
                MutexAutoLock lock(mTransport->mLock);
                mTransport->ReleaseFD_Locked(fd);
            }
            return NS_BASE_STREAM_WOULD_BLOCK;
        }
    }

    SOCKET_LOG(("  calling PR_Write [count=%u]\n", count));

    // cannot hold lock while calling NSPR.  (worried about the fact that PSM
    // synchronously proxies notifications over to the UI thread, which could
    // mistakenly try to re-enter this code.)
    int32_t n = PR_Write(fd, buf, count);

    SOCKET_LOG(("  PR_Write returned [n=%d]\n", n));

    nsresult rv = NS_OK;
    {
        MutexAutoLock lock(mTransport->mLock);

#ifdef ENABLE_SOCKET_TRACING
        if (n > 0)
            mTransport->TraceOutBuf(buf, n);
#endif

        mTransport->ReleaseFD_Locked(fd);

        if (n > 0)
            mByteCount += (*countWritten = n);
        else if (n < 0) {
            PRErrorCode code = PR_GetError();
            if (code == PR_WOULD_BLOCK_ERROR)
                return NS_BASE_STREAM_WOULD_BLOCK;
            mCondition = ErrorAccordingToNSPR(code);
        }
        rv = mCondition;
    }
    if (NS_FAILED(rv))
        mTransport->OnOutputClosed(rv);

    // only send this notification if we have indeed written some data.
    // see bug 196827 for an example of why this is important.
    // During a fast open we are actually not sending data, the data will be
    // only buffered in the TCPFastOpenLayer. Therefore we will call
    // SendStatus(NS_NET_STATUS_SENDING_TO) when we really send data (i.e. when
    // TCPFastOpenFinish is called.
    if ((n > 0) && !fastOpenInProgress) {
        mTransport->SendStatus(NS_NET_STATUS_SENDING_TO);
    }

    return rv;
}

NS_IMETHODIMP
nsSocketOutputStream::WriteSegments(nsReadSegmentFun reader, void *closure,
                                    uint32_t count, uint32_t *countRead)
{
    // socket stream is unbuffered
    return NS_ERROR_NOT_IMPLEMENTED;
}

nsresult
nsSocketOutputStream::WriteFromSegments(nsIInputStream *input,
                                        void *closure,
                                        const char *fromSegment,
                                        uint32_t offset,
                                        uint32_t count,
                                        uint32_t *countRead)
{
    nsSocketOutputStream *self = (nsSocketOutputStream *) closure;
    return self->Write(fromSegment, count, countRead);
}

NS_IMETHODIMP
nsSocketOutputStream::WriteFrom(nsIInputStream *stream, uint32_t count, uint32_t *countRead)
{
    return stream->ReadSegments(WriteFromSegments, this, count, countRead);
}

NS_IMETHODIMP
nsSocketOutputStream::IsNonBlocking(bool *nonblocking)
{
    *nonblocking = true;
    return NS_OK;
}

NS_IMETHODIMP
nsSocketOutputStream::CloseWithStatus(nsresult reason)
{
    SOCKET_LOG(("nsSocketOutputStream::CloseWithStatus [this=%p reason=%" PRIx32 "]\n", this,
                static_cast<uint32_t>(reason)));

    // may be called from any thread

    nsresult rv;
    {
        MutexAutoLock lock(mTransport->mLock);

        if (NS_SUCCEEDED(mCondition))
            rv = mCondition = reason;
        else
            rv = NS_OK;
    }
    if (NS_FAILED(rv))
        mTransport->OnOutputClosed(rv);
    return NS_OK;
}

NS_IMETHODIMP
nsSocketOutputStream::AsyncWait(nsIOutputStreamCallback *callback,
                                uint32_t flags,
                                uint32_t amount,
                                nsIEventTarget *target)
{
    SOCKET_LOG(("nsSocketOutputStream::AsyncWait [this=%p]\n", this));

    {
        MutexAutoLock lock(mTransport->mLock);

        if (callback && target) {
            //
            // build event proxy
            //
            mCallback = NS_NewOutputStreamReadyEvent(callback, target);
        }
        else
            mCallback = callback;

        mCallbackFlags = flags;
    }
    mTransport->OnOutputPending();
    return NS_OK;
}

//-----------------------------------------------------------------------------
// socket transport impl
//-----------------------------------------------------------------------------

nsSocketTransport::nsSocketTransport()
    : mTypes(nullptr)
    , mTypeCount(0)
    , mPort(0)
    , mProxyPort(0)
    , mOriginPort(0)
    , mProxyTransparent(false)
    , mProxyTransparentResolvesHost(false)
    , mHttpsProxy(false)
    , mConnectionFlags(0)
    , mTlsFlags(0)
    , mReuseAddrPort(false)
    , mState(STATE_CLOSED)
    , mAttached(false)
    , mInputClosed(true)
    , mOutputClosed(true)
    , mResolving(false)
    , mNetAddrIsSet(false)
    , mSelfAddrIsSet(false)
    , mLock("nsSocketTransport.mLock")
    , mFD(this)
    , mFDref(0)
    , mFDconnected(false)
    , mFDFastOpenInProgress(false)
    , mSocketTransportService(gSocketTransportService)
    , mInput(this)
    , mOutput(this)
    , mQoSBits(0x00)
    , mKeepaliveEnabled(false)
    , mKeepaliveIdleTimeS(-1)
    , mKeepaliveRetryIntervalS(-1)
    , mKeepaliveProbeCount(-1)
    , mFastOpenCallback(nullptr)
    , mFastOpenLayerHasBufferedData(false)
    , mFastOpenStatus(TFO_NOT_SET)
    , mFirstRetryError(NS_OK)
    , mDoNotRetryToConnect(false)
{
    SOCKET_LOG(("creating nsSocketTransport @%p\n", this));

    mTimeouts[TIMEOUT_CONNECT]    = UINT16_MAX; // no timeout
    mTimeouts[TIMEOUT_READ_WRITE] = UINT16_MAX; // no timeout
}

nsSocketTransport::~nsSocketTransport()
{
    SOCKET_LOG(("destroying nsSocketTransport @%p\n", this));

    CleanupTypes();
}

void
nsSocketTransport::CleanupTypes()
{
    // cleanup socket type info
    if (mTypes) {
        for (uint32_t i = 0; i < mTypeCount; ++i) {
            PL_strfree(mTypes[i]);
        }
        free(mTypes);
        mTypes = nullptr;
    }
    mTypeCount = 0;
}

nsresult
nsSocketTransport::Init(const char **types, uint32_t typeCount,
                        const nsACString &host, uint16_t port,
                        const nsACString &hostRoute, uint16_t portRoute,
                        nsIProxyInfo *givenProxyInfo)
{
    nsCOMPtr<nsProxyInfo> proxyInfo;
    if (givenProxyInfo) {
        proxyInfo = do_QueryInterface(givenProxyInfo);
        NS_ENSURE_ARG(proxyInfo);
    }

    // init socket type info

    mOriginHost = host;
    mOriginPort = port;
    if (!hostRoute.IsEmpty()) {
        mHost = hostRoute;
        mPort = portRoute;
    } else {
        mHost = host;
        mPort = port;
    }

    if (proxyInfo) {
        mHttpsProxy = proxyInfo->IsHTTPS();
    }

    const char *proxyType = nullptr;
    mProxyInfo = proxyInfo;
    if (proxyInfo) {
        mProxyPort = proxyInfo->Port();
        mProxyHost = proxyInfo->Host();
        // grab proxy type (looking for "socks" for example)
        proxyType = proxyInfo->Type();
        if (proxyType && (proxyInfo->IsHTTP() ||
                          proxyInfo->IsHTTPS() ||
                          proxyInfo->IsDirect() ||
                          !strcmp(proxyType, "unknown"))) {
            proxyType = nullptr;
        }
    }

    SOCKET_LOG(("nsSocketTransport::Init [this=%p host=%s:%hu origin=%s:%d proxy=%s:%hu]\n",
                this, mHost.get(), mPort, mOriginHost.get(), mOriginPort,
                mProxyHost.get(), mProxyPort));

    // include proxy type as a socket type if proxy type is not "http"
    mTypeCount = typeCount + (proxyType != nullptr);
    if (!mTypeCount)
        return NS_OK;

    // if we have socket types, then the socket provider service had
    // better exist!
    nsresult rv;
    nsCOMPtr<nsISocketProviderService> spserv =
        do_GetService(kSocketProviderServiceCID, &rv);
    if (NS_FAILED(rv)) return rv;

    mTypes = (char **) malloc(mTypeCount * sizeof(char *));
    if (!mTypes)
        return NS_ERROR_OUT_OF_MEMORY;

    // now verify that each socket type has a registered socket provider.
    for (uint32_t i = 0, type = 0; i < mTypeCount; ++i) {
        // store socket types
        if (i == 0 && proxyType)
            mTypes[i] = PL_strdup(proxyType);
        else
            mTypes[i] = PL_strdup(types[type++]);

        if (!mTypes[i]) {
            mTypeCount = i;
            return NS_ERROR_OUT_OF_MEMORY;
        }
        nsCOMPtr<nsISocketProvider> provider;
        rv = spserv->GetSocketProvider(mTypes[i], getter_AddRefs(provider));
        if (NS_FAILED(rv)) {
            NS_WARNING("no registered socket provider");
            return rv;
        }

        // note if socket type corresponds to a transparent proxy
        // XXX don't hardcode SOCKS here (use proxy info's flags instead).
        if ((strcmp(mTypes[i], "socks") == 0) ||
            (strcmp(mTypes[i], "socks4") == 0)) {
            mProxyTransparent = true;

            if (proxyInfo->Flags() & nsIProxyInfo::TRANSPARENT_PROXY_RESOLVES_HOST) {
                // we want the SOCKS layer to send the hostname
                // and port to the proxy and let it do the DNS.
                mProxyTransparentResolvesHost = true;
            }
        }
    }

    return NS_OK;
}

nsresult
nsSocketTransport::InitWithFilename(const char *filename)
{
#if defined(XP_UNIX)
    size_t filenameLength = strlen(filename);

    if (filenameLength > sizeof(mNetAddr.local.path) - 1)
        return NS_ERROR_FILE_NAME_TOO_LONG;

    mHost.Assign(filename);
    mPort = 0;
    mTypeCount = 0;

    mNetAddr.local.family = AF_LOCAL;
    memcpy(mNetAddr.local.path, filename, filenameLength);
    mNetAddr.local.path[filenameLength] = '\0';
    mNetAddrIsSet = true;

    return NS_OK;
#else
    return NS_ERROR_SOCKET_ADDRESS_NOT_SUPPORTED;
#endif
}

nsresult
nsSocketTransport::InitWithConnectedSocket(PRFileDesc *fd, const NetAddr *addr)
{
    MOZ_ASSERT(OnSocketThread(), "not on socket thread");
    NS_ASSERTION(!mFD.IsInitialized(), "already initialized");

    char buf[kNetAddrMaxCStrBufSize];
    NetAddrToString(addr, buf, sizeof(buf));
    mHost.Assign(buf);

    uint16_t port;
    if (addr->raw.family == AF_INET)
        port = addr->inet.port;
    else if (addr->raw.family == AF_INET6)
        port = addr->inet6.port;
    else
        port = 0;
    mPort = ntohs(port);

    memcpy(&mNetAddr, addr, sizeof(NetAddr));

    mPollFlags = (PR_POLL_READ | PR_POLL_WRITE | PR_POLL_EXCEPT);
    mPollTimeout = mTimeouts[TIMEOUT_READ_WRITE];
    mState = STATE_TRANSFERRING;
    SetSocketName(fd);
    mNetAddrIsSet = true;

    {
        MutexAutoLock lock(mLock);

        mFD = fd;
        mFDref = 1;
        mFDconnected = 1;
    }

    // make sure new socket is non-blocking
    PRSocketOptionData opt;
    opt.option = PR_SockOpt_Nonblocking;
    opt.value.non_blocking = true;
    PR_SetSocketOption(fd, &opt);

    SOCKET_LOG(("nsSocketTransport::InitWithConnectedSocket [this=%p addr=%s:%hu]\n",
        this, mHost.get(), mPort));

    // jump to InitiateSocket to get ourselves attached to the STS poll list.
    return PostEvent(MSG_RETRY_INIT_SOCKET);
}

nsresult
nsSocketTransport::InitWithConnectedSocket(PRFileDesc* aFD,
                                           const NetAddr* aAddr,
                                           nsISupports* aSecInfo)
{
    mSecInfo = aSecInfo;
    return InitWithConnectedSocket(aFD, aAddr);
}

nsresult
nsSocketTransport::PostEvent(uint32_t type, nsresult status, nsISupports *param)
{
    SOCKET_LOG(("nsSocketTransport::PostEvent [this=%p type=%u status=%" PRIx32 " param=%p]\n",
                this, type, static_cast<uint32_t>(status), param));

    nsCOMPtr<nsIRunnable> event = new nsSocketEvent(this, type, status, param);
    if (!event)
        return NS_ERROR_OUT_OF_MEMORY;

    return mSocketTransportService->Dispatch(event, NS_DISPATCH_NORMAL);
}

void
nsSocketTransport::SendStatus(nsresult status)
{
    SOCKET_LOG(("nsSocketTransport::SendStatus [this=%p status=%" PRIx32 "]\n", this,
                static_cast<uint32_t>(status)));

    nsCOMPtr<nsITransportEventSink> sink;
    uint64_t progress;
    {
        MutexAutoLock lock(mLock);
        sink = mEventSink;
        switch (status) {
        case NS_NET_STATUS_SENDING_TO:
            progress = mOutput.ByteCount();
            // If Fast Open is used, we buffer some data in TCPFastOpenLayer,
            // This data can  be only tls data or application data as well.
            // socketTransport should send status only if it really has sent
            // application data. socketTransport cannot query transaction for
            // that info but it can know if transaction has send data if
            // mOutput.ByteCount() is > 0.
            if (progress == 0) {
                return;
            }
            break;
        case NS_NET_STATUS_RECEIVING_FROM:
            progress = mInput.ByteCount();
            break;
        default:
            progress = 0;
            break;
        }
    }
    if (sink) {
        sink->OnTransportStatus(this, status, progress, -1);
    }
}

nsresult
nsSocketTransport::ResolveHost()
{
    SOCKET_LOG(("nsSocketTransport::ResolveHost [this=%p %s:%d%s]\n",
                this, SocketHost().get(), SocketPort(),
                mConnectionFlags & nsSocketTransport::BYPASS_CACHE ?
                " bypass cache" : ""));

    nsresult rv;

    if (!mProxyHost.IsEmpty()) {
        if (!mProxyTransparent || mProxyTransparentResolvesHost) {
#if defined(XP_UNIX)
            MOZ_ASSERT(!mNetAddrIsSet || mNetAddr.raw.family != AF_LOCAL,
                       "Unix domain sockets can't be used with proxies");
#endif
            // When not resolving mHost locally, we still want to ensure that
            // it only contains valid characters.  See bug 304904 for details.
            // Sometimes the end host is not yet known and mHost is *
            if (!net_IsValidHostName(mHost) && !mHost.EqualsLiteral("*")) {
                SOCKET_LOG(("  invalid hostname %s\n", mHost.get()));
                return NS_ERROR_UNKNOWN_HOST;
            }
        }
        if (mProxyTransparentResolvesHost) {
            // Name resolution is done on the server side.  Just pretend
            // client resolution is complete, this will get picked up later.
            // since we don't need to do DNS now, we bypass the resolving
            // step by initializing mNetAddr to an empty address, but we
            // must keep the port. The SOCKS IO layer will use the hostname
            // we send it when it's created, rather than the empty address
            // we send with the connect call.
            mState = STATE_RESOLVING;
            mNetAddr.raw.family = AF_INET;
            mNetAddr.inet.port = htons(SocketPort());
            mNetAddr.inet.ip = htonl(INADDR_ANY);
            return PostEvent(MSG_DNS_LOOKUP_COMPLETE, NS_OK, nullptr);
        }
    }

    nsCOMPtr<nsIDNSService> dns = do_GetService(kDNSServiceCID, &rv);
    if (NS_FAILED(rv)) return rv;

    mResolving = true;

    uint32_t dnsFlags = 0;
    if (mConnectionFlags & nsSocketTransport::BYPASS_CACHE)
        dnsFlags = nsIDNSService::RESOLVE_BYPASS_CACHE;
    if (mConnectionFlags & nsSocketTransport::DISABLE_IPV6)
        dnsFlags |= nsIDNSService::RESOLVE_DISABLE_IPV6;
    if (mConnectionFlags & nsSocketTransport::DISABLE_IPV4)
        dnsFlags |= nsIDNSService::RESOLVE_DISABLE_IPV4;

    NS_ASSERTION(!(dnsFlags & nsIDNSService::RESOLVE_DISABLE_IPV6) ||
                 !(dnsFlags & nsIDNSService::RESOLVE_DISABLE_IPV4),
                 "Setting both RESOLVE_DISABLE_IPV6 and RESOLVE_DISABLE_IPV4");

    SendStatus(NS_NET_STATUS_RESOLVING_HOST);

    if (!SocketHost().Equals(mOriginHost)) {
        SOCKET_LOG(("nsSocketTransport %p origin %s doing dns for %s\n",
                    this, mOriginHost.get(), SocketHost().get()));
    }
    rv = dns->AsyncResolveExtendedNative(SocketHost(), dnsFlags, mNetworkInterfaceId,
                                         this, nullptr, mOriginAttributes,
                                         getter_AddRefs(mDNSRequest));
    if (NS_SUCCEEDED(rv)) {
        SOCKET_LOG(("  advancing to STATE_RESOLVING\n"));
        mState = STATE_RESOLVING;
    }
    return rv;
}

nsresult
nsSocketTransport::BuildSocket(PRFileDesc *&fd, bool &proxyTransparent, bool &usingSSL)
{
    SOCKET_LOG(("nsSocketTransport::BuildSocket [this=%p]\n", this));

    nsresult rv;

    proxyTransparent = false;
    usingSSL = false;

    if (mTypeCount == 0) {
        fd = PR_OpenTCPSocket(mNetAddr.raw.family);
        rv = fd ? NS_OK : NS_ERROR_OUT_OF_MEMORY;
    }
    else {
#if defined(XP_UNIX)
        MOZ_ASSERT(!mNetAddrIsSet || mNetAddr.raw.family != AF_LOCAL,
                   "Unix domain sockets can't be used with socket types");
#endif

        fd = nullptr;

        nsCOMPtr<nsISocketProviderService> spserv =
            do_GetService(kSocketProviderServiceCID, &rv);
        if (NS_FAILED(rv)) return rv;

        // by setting host to mOriginHost, instead of mHost we send the
        // SocketProvider (e.g. PSM) the origin hostname but can still do DNS
        // on an explicit alternate service host name
        const char *host       = mOriginHost.get();
        int32_t     port       = (int32_t) mOriginPort;
        nsCOMPtr<nsIProxyInfo> proxyInfo = mProxyInfo;
        uint32_t    controlFlags = 0;

        uint32_t i;
        for (i=0; i<mTypeCount; ++i) {
            nsCOMPtr<nsISocketProvider> provider;

            SOCKET_LOG(("  pushing io layer [%u:%s]\n", i, mTypes[i]));

            rv = spserv->GetSocketProvider(mTypes[i], getter_AddRefs(provider));
            if (NS_FAILED(rv))
                break;

            if (mProxyTransparentResolvesHost)
                controlFlags |= nsISocketProvider::PROXY_RESOLVES_HOST;

            if (mConnectionFlags & nsISocketTransport::ANONYMOUS_CONNECT)
                controlFlags |= nsISocketProvider::ANONYMOUS_CONNECT;

            if (mConnectionFlags & nsISocketTransport::NO_PERMANENT_STORAGE)
                controlFlags |= nsISocketProvider::NO_PERMANENT_STORAGE;

            if (mConnectionFlags & nsISocketTransport::MITM_OK)
                controlFlags |= nsISocketProvider::MITM_OK;

            if (mConnectionFlags & nsISocketTransport::BE_CONSERVATIVE)
                controlFlags |= nsISocketProvider::BE_CONSERVATIVE;

            nsCOMPtr<nsISupports> secinfo;
            if (i == 0) {
                // if this is the first type, we'll want the
                // service to allocate a new socket

                // when https proxying we want to just connect to the proxy as if
                // it were the end host (i.e. expect the proxy's cert)

                rv = provider->NewSocket(mNetAddr.raw.family,
                                         mHttpsProxy ? mProxyHost.get() : host,
                                         mHttpsProxy ? mProxyPort : port,
                                         proxyInfo, mOriginAttributes,
                                         controlFlags, mTlsFlags, &fd,
                                         getter_AddRefs(secinfo));

                if (NS_SUCCEEDED(rv) && !fd) {
                    NS_NOTREACHED("NewSocket succeeded but failed to create a PRFileDesc");
                    rv = NS_ERROR_UNEXPECTED;
                }
            }
            else {
                // the socket has already been allocated,
                // so we just want the service to add itself
                // to the stack (such as pushing an io layer)
                rv = provider->AddToSocket(mNetAddr.raw.family,
                                           host, port, proxyInfo,
                                           mOriginAttributes, controlFlags, mTlsFlags, fd,
                                           getter_AddRefs(secinfo));
            }

            // controlFlags = 0; not used below this point...
            if (NS_FAILED(rv))
                break;

            // if the service was ssl or starttls, we want to hold onto the socket info
            bool isSSL = (strcmp(mTypes[i], "ssl") == 0);
            if (isSSL || (strcmp(mTypes[i], "starttls") == 0)) {
                // remember security info and give notification callbacks to PSM...
                nsCOMPtr<nsIInterfaceRequestor> callbacks;
                {
                    MutexAutoLock lock(mLock);
                    mSecInfo = secinfo;
                    callbacks = mCallbacks;
                    SOCKET_LOG(("  [secinfo=%p callbacks=%p]\n", mSecInfo.get(), mCallbacks.get()));
                }
                // don't call into PSM while holding mLock!!
                nsCOMPtr<nsISSLSocketControl> secCtrl(do_QueryInterface(secinfo));
                if (secCtrl)
                    secCtrl->SetNotificationCallbacks(callbacks);
                // remember if socket type is SSL so we can ProxyStartSSL if need be.
                usingSSL = isSSL;
            }
            else if ((strcmp(mTypes[i], "socks") == 0) ||
                     (strcmp(mTypes[i], "socks4") == 0)) {
                // since socks is transparent, any layers above
                // it do not have to worry about proxy stuff
                proxyInfo = nullptr;
                proxyTransparent = true;
            }
        }

        if (NS_FAILED(rv)) {
            SOCKET_LOG(("  error pushing io layer [%u:%s rv=%" PRIx32 "]\n", i, mTypes[i],
                        static_cast<uint32_t>(rv)));
            if (fd) {
                CloseSocket(fd,
                    mSocketTransportService->IsTelemetryEnabledAndNotSleepPhase()); 
            }
        }
    }

    return rv;
}

nsresult
nsSocketTransport::InitiateSocket()
{
    SOCKET_LOG(("nsSocketTransport::InitiateSocket [this=%p]\n", this));

    nsresult rv;
    bool isLocal;
    IsLocal(&isLocal);

    if (gIOService->IsNetTearingDown()) {
        return NS_ERROR_ABORT;
    }
    if (gIOService->IsOffline()) {
        if (!isLocal)
            return NS_ERROR_OFFLINE;
    } else if (!isLocal) {

#ifdef DEBUG
        // all IP networking has to be done from the parent
        if (NS_SUCCEEDED(mCondition) &&
            ((mNetAddr.raw.family == AF_INET) || (mNetAddr.raw.family == AF_INET6))) {
            MOZ_ASSERT(!IsNeckoChild());
        }
#endif

        if (NS_SUCCEEDED(mCondition) &&
            xpc::AreNonLocalConnectionsDisabled() &&
            !(IsIPAddrAny(&mNetAddr) || IsIPAddrLocal(&mNetAddr))) {
            nsAutoCString ipaddr;
            RefPtr<nsNetAddr> netaddr = new nsNetAddr(&mNetAddr);
            netaddr->GetAddress(ipaddr);
            fprintf_stderr(stderr,
                           "FATAL ERROR: Non-local network connections are disabled and a connection "
                           "attempt to %s (%s) was made.\nYou should only access hostnames "
                           "available via the test networking proxy (if running mochitests) "
                           "or from a test-specific httpd.js server (if running xpcshell tests). "
                           "Browser services should be disabled or redirected to a local server.\n",
                           mHost.get(), ipaddr.get());
            MOZ_CRASH("Attempting to connect to non-local address!");
        }
    }

    // Hosts/Proxy Hosts that are Local IP Literals should not be speculatively
    // connected - Bug 853423.
    if (mConnectionFlags & nsISocketTransport::DISABLE_RFC1918 &&
        IsIPAddrLocal(&mNetAddr)) {
        if (SOCKET_LOG_ENABLED()) {
            nsAutoCString netAddrCString;
            netAddrCString.SetCapacity(kIPv6CStrBufSize);
            if (!NetAddrToString(&mNetAddr,
                                 netAddrCString.BeginWriting(),
                                 kIPv6CStrBufSize))
                netAddrCString = NS_LITERAL_CSTRING("<IP-to-string failed>");
            SOCKET_LOG(("nsSocketTransport::InitiateSocket skipping "
                        "speculative connection for host [%s:%d] proxy "
                        "[%s:%d] with Local IP address [%s]",
                        mHost.get(), mPort, mProxyHost.get(), mProxyPort,
                        netAddrCString.get()));
        }
        mCondition = NS_ERROR_CONNECTION_REFUSED;
        OnSocketDetached(nullptr);
        return mCondition;
    }

    //
    // find out if it is going to be ok to attach another socket to the STS.
    // if not then we have to wait for the STS to tell us that it is ok.
    // the notification is asynchronous, which means that when we could be
    // in a race to call AttachSocket once notified.  for this reason, when
    // we get notified, we just re-enter this function.  as a result, we are
    // sure to ask again before calling AttachSocket.  in this way we deal
    // with the race condition.  though it isn't the most elegant solution,
    // it is far simpler than trying to build a system that would guarantee
    // FIFO ordering (which wouldn't even be that valuable IMO).  see bug
    // 194402 for more info.
    //
    if (!mSocketTransportService->CanAttachSocket()) {
        nsCOMPtr<nsIRunnable> event =
                new nsSocketEvent(this, MSG_RETRY_INIT_SOCKET);
        if (!event)
            return NS_ERROR_OUT_OF_MEMORY;
        return mSocketTransportService->NotifyWhenCanAttachSocket(event);
    }

    //
    // if we already have a connected socket, then just attach and return.
    //
    if (mFD.IsInitialized()) {
        rv = mSocketTransportService->AttachSocket(mFD, this);
        if (NS_SUCCEEDED(rv))
            mAttached = true;
        return rv;
    }

    //
    // create new socket fd, push io layers, etc.
    //
    PRFileDesc *fd;
    bool proxyTransparent;
    bool usingSSL;

    rv = BuildSocket(fd, proxyTransparent, usingSSL);
    if (NS_FAILED(rv)) {
        SOCKET_LOG(("  BuildSocket failed [rv=%" PRIx32 "]\n", static_cast<uint32_t>(rv)));
        return rv;
    }

    // Attach network activity monitor
    NetworkActivityMonitor::AttachIOLayer(fd);

    PRStatus status;

    // Make the socket non-blocking...
    PRSocketOptionData opt;
    opt.option = PR_SockOpt_Nonblocking;
    opt.value.non_blocking = true;
    status = PR_SetSocketOption(fd, &opt);
    NS_ASSERTION(status == PR_SUCCESS, "unable to make socket non-blocking");

    if (mReuseAddrPort) {
        SOCKET_LOG(("  Setting port/addr reuse socket options\n"));

        // Set ReuseAddr for TCP sockets to enable having several
        // sockets bound to same local IP and port
        PRSocketOptionData opt_reuseaddr;
        opt_reuseaddr.option = PR_SockOpt_Reuseaddr;
        opt_reuseaddr.value.reuse_addr = PR_TRUE;
        status = PR_SetSocketOption(fd, &opt_reuseaddr);
        if (status != PR_SUCCESS) {
            SOCKET_LOG(("  Couldn't set reuse addr socket option: %d\n",
                        status));
        }

        // And also set ReusePort for platforms supporting this socket option
        PRSocketOptionData opt_reuseport;
        opt_reuseport.option = PR_SockOpt_Reuseport;
        opt_reuseport.value.reuse_port = PR_TRUE;
        status = PR_SetSocketOption(fd, &opt_reuseport);
        if (status != PR_SUCCESS
            && PR_GetError() != PR_OPERATION_NOT_SUPPORTED_ERROR) {
            SOCKET_LOG(("  Couldn't set reuse port socket option: %d\n",
                        status));
        }
    }

    // disable the nagle algorithm - if we rely on it to coalesce writes into
    // full packets the final packet of a multi segment POST/PUT or pipeline
    // sequence is delayed a full rtt
    opt.option = PR_SockOpt_NoDelay;
    opt.value.no_delay = true;
    PR_SetSocketOption(fd, &opt);

    // if the network.tcp.sendbuffer preference is set, use it to size SO_SNDBUF
    // The Windows default of 8KB is too small and as of vista sp1, autotuning
    // only applies to receive window
    int32_t sndBufferSize;
    mSocketTransportService->GetSendBufferSize(&sndBufferSize);
    if (sndBufferSize > 0) {
        opt.option = PR_SockOpt_SendBufferSize;
        opt.value.send_buffer_size = sndBufferSize;
        PR_SetSocketOption(fd, &opt);
    }

    if (mQoSBits) {
        opt.option = PR_SockOpt_IpTypeOfService;
        opt.value.tos = mQoSBits;
        PR_SetSocketOption(fd, &opt);
    }

#if defined(XP_WIN)
    // The linger is turned off by default. This is not a hard close, but
    // closesocket should return immediately and operating system tries to send
    // remaining data for certain, implementation specific, amount of time.
    // https://msdn.microsoft.com/en-us/library/ms739165.aspx
    //
    // Turn the linger option on an set the interval to 0. This will cause hard
    // close of the socket.
    opt.option =  PR_SockOpt_Linger;
    opt.value.linger.polarity = 1;
    opt.value.linger.linger = 0;
    PR_SetSocketOption(fd, &opt);
#endif

    // inform socket transport about this newly created socket...
    rv = mSocketTransportService->AttachSocket(fd, this);
    if (NS_FAILED(rv)) {
        CloseSocket(fd,
            mSocketTransportService->IsTelemetryEnabledAndNotSleepPhase());
        return rv;
    }
    mAttached = true;

    // assign mFD so that we can properly handle OnSocketDetached before we've
    // established a connection.
    {
        MutexAutoLock lock(mLock);
        mFD = fd;
        mFDref = 1;
        mFDconnected = false;
    }

    SOCKET_LOG(("  advancing to STATE_CONNECTING\n"));
    mState = STATE_CONNECTING;
    mPollTimeout = mTimeouts[TIMEOUT_CONNECT];
    SendStatus(NS_NET_STATUS_CONNECTING_TO);

    if (SOCKET_LOG_ENABLED()) {
        char buf[kNetAddrMaxCStrBufSize];
        NetAddrToString(&mNetAddr, buf, sizeof(buf));
        SOCKET_LOG(("  trying address: %s\n", buf));
    }

    //
    // Initiate the connect() to the host...
    //
    PRNetAddr prAddr;
    {
        if (mBindAddr) {
            MutexAutoLock lock(mLock);
            NetAddrToPRNetAddr(mBindAddr.get(), &prAddr);
            status = PR_Bind(fd, &prAddr);
            if (status != PR_SUCCESS) {
                return NS_ERROR_FAILURE;
            }
            mBindAddr = nullptr;
        }
    }

    NetAddrToPRNetAddr(&mNetAddr, &prAddr);

#ifdef XP_WIN
    // Find the real tcp socket and set non-blocking once again!
    // Bug 1158189.
    PRFileDesc *bottom = PR_GetIdentitiesLayer(fd, PR_NSPR_IO_LAYER);
    if (bottom) {
      PROsfd osfd = PR_FileDesc2NativeHandle(bottom);
      u_long nonblocking = 1;
      if (ioctlsocket(osfd, FIONBIO, &nonblocking) != 0) {
        NS_WARNING("Socket could not be set non-blocking!");
        return NS_ERROR_FAILURE;
      }
    }
#endif

    // We use PRIntervalTime here because we need
    // nsIOService::LastOfflineStateChange time and
    // nsIOService::LastConectivityChange time to be atomic.
    PRIntervalTime connectStarted = 0;
    if (gSocketTransportService->IsTelemetryEnabledAndNotSleepPhase()) {
        connectStarted = PR_IntervalNow();
    }

    bool tfo = false;
    if (mFastOpenCallback &&
        mFastOpenCallback->FastOpenEnabled()) {
        if (NS_SUCCEEDED(AttachTCPFastOpenIOLayer(fd))) {
            tfo = true;
            SOCKET_LOG(("nsSocketTransport::InitiateSocket TCP Fast Open "
                        "started [this=%p]\n", this));
        }
    }

    bool connectCalled = true; // This is only needed for telemetry.
    status = PR_Connect(fd, &prAddr, NS_SOCKET_CONNECT_TIMEOUT);
    PRErrorCode code = PR_GetError();
    if ((status == PR_SUCCESS) && tfo) {
        {
            MutexAutoLock lock(mLock);
            mFDFastOpenInProgress = true;
        }
        SOCKET_LOG(("Using TCP Fast Open."));
        rv = mFastOpenCallback->StartFastOpen();
        if (NS_FAILED(rv)) {
            if (NS_SUCCEEDED(mCondition)) {
                mCondition = rv;
            }
            mFastOpenCallback = nullptr;
            MutexAutoLock lock(mLock);
            mFDFastOpenInProgress = false;
            return rv;
        }
        status = PR_FAILURE;
        connectCalled = false;
        bool fastOpenNotSupported = false;
        TCPFastOpenFinish(fd, code, fastOpenNotSupported, mFastOpenStatus);

        // If we have sent data, trigger a socket status event.
        if (mFastOpenStatus == TFO_DATA_SENT) {
            SendStatus(NS_NET_STATUS_SENDING_TO);
        }

        // If we have still some data buffered this data must be flush before
        // mOutput.OnSocketReady(NS_OK) is called in
        // nsSocketTransport::OnSocketReady, partially to keep socket status
        // event in order.
        mFastOpenLayerHasBufferedData = TCPFastOpenGetCurrentBufferSize(fd);

        mFastOpenCallback->SetFastOpenStatus(mFastOpenStatus);
        SOCKET_LOG(("called StartFastOpen - code=%d; fastOpen is %s "
                    "supported.\n", code,
                    fastOpenNotSupported ? "not" : ""));
        SOCKET_LOG(("TFO status %d\n", mFastOpenStatus));

        if (fastOpenNotSupported) {
          // When TCP_FastOpen is turned off on the local host
          // SendTo will return PR_NOT_TCP_SOCKET_ERROR. This is only
          // on Linux.
          // If a windows version does not support Fast Open, the return value
          // will be PR_NOT_IMPLEMENTED_ERROR. This is only for windows 10
          // versions older than version 1607, because we do not have subverion
          // to check, we need to call PR_SendTo to check if it is supported.
          mFastOpenCallback->FastOpenNotSupported();
          // FastOpenNotSupported will set Fast Open as not supported globally.
          // For this connection we will pretend that we still use fast open,
          // because of the fallback mechanism in case we need to restart the
          // attached transaction.
          connectCalled = true;
        }
    } else {
        mFastOpenCallback = nullptr;
    }


    if (gSocketTransportService->IsTelemetryEnabledAndNotSleepPhase() &&
        connectStarted && connectCalled) {
        SendPRBlockingTelemetry(connectStarted,
            Telemetry::PRCONNECT_BLOCKING_TIME_NORMAL,
            Telemetry::PRCONNECT_BLOCKING_TIME_SHUTDOWN,
            Telemetry::PRCONNECT_BLOCKING_TIME_CONNECTIVITY_CHANGE,
            Telemetry::PRCONNECT_BLOCKING_TIME_LINK_CHANGE,
            Telemetry::PRCONNECT_BLOCKING_TIME_OFFLINE);
    }

    if (status == PR_SUCCESS) {
        //
        // we are connected!
        //
        OnSocketConnected();
    }
    else {
#if defined(TEST_CONNECT_ERRORS)
        code = RandomizeConnectError(code);
#endif
        //
        // If the PR_Connect(...) would block, then poll for a connection.
        //
        if ((PR_WOULD_BLOCK_ERROR == code) || (PR_IN_PROGRESS_ERROR == code))
            mPollFlags = (PR_POLL_EXCEPT | PR_POLL_WRITE);
        //
        // If the socket is already connected, then return success...
        //
        else if (PR_IS_CONNECTED_ERROR == code) {
            //
            // we are connected!
            //
            OnSocketConnected();

            if (mSecInfo && !mProxyHost.IsEmpty() && proxyTransparent && usingSSL) {
                // if the connection phase is finished, and the ssl layer has
                // been pushed, and we were proxying (transparently; ie. nothing
                // has to happen in the protocol layer above us), it's time for
                // the ssl to start doing it's thing.
                nsCOMPtr<nsISSLSocketControl> secCtrl =
                    do_QueryInterface(mSecInfo);
                if (secCtrl) {
                    SOCKET_LOG(("  calling ProxyStartSSL()\n"));
                    secCtrl->ProxyStartSSL();
                }
                // XXX what if we were forced to poll on the socket for a successful
                // connection... wouldn't we need to call ProxyStartSSL after a call
                // to PR_ConnectContinue indicates that we are connected?
                //
                // XXX this appears to be what the old socket transport did.  why
                // isn't this broken?
            }
        }
        //
        // A SOCKS request was rejected; get the actual error code from
        // the OS error
        //
        else if (PR_UNKNOWN_ERROR == code &&
                 mProxyTransparent &&
                 !mProxyHost.IsEmpty()) {
            code = PR_GetOSError();
            rv = ErrorAccordingToNSPR(code);
        }
        //
        // The connection was refused...
        //
        else {
            if (gSocketTransportService->IsTelemetryEnabledAndNotSleepPhase() &&
                connectStarted && connectStarted) {
                SendPRBlockingTelemetry(connectStarted,
                    Telemetry::PRCONNECT_FAIL_BLOCKING_TIME_NORMAL,
                    Telemetry::PRCONNECT_FAIL_BLOCKING_TIME_SHUTDOWN,
                    Telemetry::PRCONNECT_FAIL_BLOCKING_TIME_CONNECTIVITY_CHANGE,
                    Telemetry::PRCONNECT_FAIL_BLOCKING_TIME_LINK_CHANGE,
                    Telemetry::PRCONNECT_FAIL_BLOCKING_TIME_OFFLINE);
            }

            rv = ErrorAccordingToNSPR(code);
            if ((rv == NS_ERROR_CONNECTION_REFUSED) && !mProxyHost.IsEmpty())
                rv = NS_ERROR_PROXY_CONNECTION_REFUSED;
        }
    }
    return rv;
}

bool
nsSocketTransport::RecoverFromError()
{
    NS_ASSERTION(NS_FAILED(mCondition), "there should be something wrong");

    SOCKET_LOG(("nsSocketTransport::RecoverFromError [this=%p state=%x cond=%" PRIx32 "]\n",
                this, mState, static_cast<uint32_t>(mCondition)));

    if (mDoNotRetryToConnect) {
        SOCKET_LOG(("nsSocketTransport::RecoverFromError do not retry because "
                    "mDoNotRetryToConnect is set [this=%p]\n",
                    this));
        return false;
    }

#if defined(XP_UNIX)
    // Unix domain connections don't have multiple addresses to try,
    // so the recovery techniques here don't apply.
    if (mNetAddrIsSet && mNetAddr.raw.family == AF_LOCAL)
        return false;
#endif

    // can only recover from errors in these states
    if (mState != STATE_RESOLVING && mState != STATE_CONNECTING)
        return false;

    nsresult rv;

    // OK to check this outside mLock
    NS_ASSERTION(!mFDconnected, "socket should not be connected");

    // all connection failures need to be reported to DNS so that the next
    // time we will use a different address if available.
    // Skip conditions that can be cause by TCP Fast Open.
    if ((!mFDFastOpenInProgress ||
         ((mCondition != NS_ERROR_CONNECTION_REFUSED) &&
          (mCondition != NS_ERROR_NET_TIMEOUT) &&
          (mCondition != NS_ERROR_PROXY_CONNECTION_REFUSED))) &&
        mState == STATE_CONNECTING && mDNSRecord) {
        mDNSRecord->ReportUnusable(SocketPort());
    }

#if defined(_WIN64) && defined(WIN95)
    // can only recover from these errors
    if (mCondition != NS_ERROR_CONNECTION_REFUSED &&
        mCondition != NS_ERROR_PROXY_CONNECTION_REFUSED &&
        mCondition != NS_ERROR_NET_TIMEOUT &&
        mCondition != NS_ERROR_UNKNOWN_HOST &&
        mCondition != NS_ERROR_UNKNOWN_PROXY_HOST &&
        !(mFDFastOpenInProgress && (mCondition == NS_ERROR_FAILURE)))
        return false;
#else
    if (mCondition != NS_ERROR_CONNECTION_REFUSED &&
        mCondition != NS_ERROR_PROXY_CONNECTION_REFUSED &&
        mCondition != NS_ERROR_NET_TIMEOUT &&
        mCondition != NS_ERROR_UNKNOWN_HOST &&
        mCondition != NS_ERROR_UNKNOWN_PROXY_HOST)
        return false;
#endif

    bool tryAgain = false;
    if (mFDFastOpenInProgress &&
        ((mCondition == NS_ERROR_CONNECTION_REFUSED) ||
         (mCondition == NS_ERROR_NET_TIMEOUT) ||
#if defined(_WIN64) && defined(WIN95)
         // On Windows PR_ContinueConnect can return NS_ERROR_FAILURE.
         // This will be fixed in bug 1386719 and this is just a temporary
         // work around.
         (mCondition == NS_ERROR_FAILURE) ||
#endif
         (mCondition == NS_ERROR_PROXY_CONNECTION_REFUSED))) {
        // TCP Fast Open can be blocked by middle boxes so we will retry
        // without it.
        tryAgain = true;
        // If we cancel the connection because backup socket was successfully
        // connected, mFDFastOpenInProgress will be true but mFastOpenCallback
        // will be nullptr.
        if (mFastOpenCallback) {
            mFastOpenCallback->SetFastOpenConnected(mCondition, true);
        }
        mFastOpenCallback = nullptr;

    } else {

        // This is only needed for telemetry.
        if (NS_SUCCEEDED(mFirstRetryError)) {
            mFirstRetryError = mCondition;
        }
        if ((mState == STATE_CONNECTING) && mDNSRecord &&
            mSocketTransportService->IsTelemetryEnabledAndNotSleepPhase()) {
            if (mNetAddr.raw.family == AF_INET) {
                Telemetry::Accumulate(Telemetry::IPV4_AND_IPV6_ADDRESS_CONNECTIVITY,
                                      UNSUCCESSFUL_CONNECTING_TO_IPV4_ADDRESS);
            } else if (mNetAddr.raw.family == AF_INET6) {
                Telemetry::Accumulate(Telemetry::IPV4_AND_IPV6_ADDRESS_CONNECTIVITY,
                                      UNSUCCESSFUL_CONNECTING_TO_IPV6_ADDRESS);
            }
        }

        if (mConnectionFlags & (DISABLE_IPV6 | DISABLE_IPV4) &&
            mCondition == NS_ERROR_UNKNOWN_HOST &&
            mState == STATE_RESOLVING &&
            !mProxyTransparentResolvesHost) {
            SOCKET_LOG(("  trying lookup again with both ipv4/ipv6 enabled\n"));
            mConnectionFlags &= ~(DISABLE_IPV6 | DISABLE_IPV4);
            tryAgain = true;
        }

        // try next ip address only if past the resolver stage...
        if (mState == STATE_CONNECTING && mDNSRecord) {
            nsresult rv = mDNSRecord->GetNextAddr(SocketPort(), &mNetAddr);
            if (NS_SUCCEEDED(rv)) {
                SOCKET_LOG(("  trying again with next ip address\n"));
                tryAgain = true;
            }
            else if (mConnectionFlags & (DISABLE_IPV6 | DISABLE_IPV4)) {
                // Drop state to closed.  This will trigger new round of DNS
                // resolving bellow.
                // XXX Could be optimized to only switch the flags to save
                // duplicate connection attempts.
                SOCKET_LOG(("  failed to connect all ipv4-only or ipv6-only "
                            "hosts, trying lookup/connect again with both "
                            "ipv4/ipv6\n"));
                mState = STATE_CLOSED;
                mConnectionFlags &= ~(DISABLE_IPV6 | DISABLE_IPV4);
                tryAgain = true;
            }
        }
    }

    // prepare to try again.
    if (tryAgain) {
        uint32_t msg;

        if (mState == STATE_CONNECTING) {
            mState = STATE_RESOLVING;
            msg = MSG_DNS_LOOKUP_COMPLETE;
        }
        else {
            mState = STATE_CLOSED;
            msg = MSG_ENSURE_CONNECT;
        }

        rv = PostEvent(msg, NS_OK);
        if (NS_FAILED(rv))
            tryAgain = false;
    }

    return tryAgain;
}

// called on the socket thread only
void
nsSocketTransport::OnMsgInputClosed(nsresult reason)
{
    SOCKET_LOG(("nsSocketTransport::OnMsgInputClosed [this=%p reason=%" PRIx32 "]\n",
        this, static_cast<uint32_t>(reason)));

    MOZ_ASSERT(OnSocketThread(), "not on socket thread");

    mInputClosed = true;
    // check if event should affect entire transport
    if (NS_FAILED(reason) && (reason != NS_BASE_STREAM_CLOSED))
        mCondition = reason;                // XXX except if NS_FAILED(mCondition), right??
    else if (mOutputClosed)
        mCondition = NS_BASE_STREAM_CLOSED; // XXX except if NS_FAILED(mCondition), right??
    else {
        if (mState == STATE_TRANSFERRING)
            mPollFlags &= ~PR_POLL_READ;
        mInput.OnSocketReady(reason);
    }
}

// called on the socket thread only
void
nsSocketTransport::OnMsgOutputClosed(nsresult reason)
{
    SOCKET_LOG(("nsSocketTransport::OnMsgOutputClosed [this=%p reason=%" PRIx32 "]\n",
        this, static_cast<uint32_t>(reason)));

    MOZ_ASSERT(OnSocketThread(), "not on socket thread");

    mOutputClosed = true;
    // check if event should affect entire transport
    if (NS_FAILED(reason) && (reason != NS_BASE_STREAM_CLOSED))
        mCondition = reason;                // XXX except if NS_FAILED(mCondition), right??
    else if (mInputClosed)
        mCondition = NS_BASE_STREAM_CLOSED; // XXX except if NS_FAILED(mCondition), right??
    else {
        if (mState == STATE_TRANSFERRING)
            mPollFlags &= ~PR_POLL_WRITE;
        mOutput.OnSocketReady(reason);
    }
}

void
nsSocketTransport::OnSocketConnected()
{
    MOZ_ASSERT(OnSocketThread(), "not on socket thread");
    SOCKET_LOG(("  advancing to STATE_TRANSFERRING\n"));

    mPollFlags = (PR_POLL_READ | PR_POLL_WRITE | PR_POLL_EXCEPT);
    mPollTimeout = mTimeouts[TIMEOUT_READ_WRITE];
    mState = STATE_TRANSFERRING;

    // Set the m*AddrIsSet flags only when state has reached TRANSFERRING
    // because we need to make sure its value does not change due to failover
    mNetAddrIsSet = true;

    if (mFDFastOpenInProgress && mFastOpenCallback) {
        // mFastOpenCallback can be null when for example h2 is negotiated on
        // another connection to the same host and all connections are
        // abandoned.
        mFastOpenCallback->SetFastOpenConnected(NS_OK, false);
    }
    mFastOpenCallback = nullptr;

    // assign mFD (must do this within the transport lock), but take care not
    // to trample over mFDref if mFD is already set.
    {
        MutexAutoLock lock(mLock);
        NS_ASSERTION(mFD.IsInitialized(), "no socket");
        NS_ASSERTION(mFDref == 1, "wrong socket ref count");
        SetSocketName(mFD);
        mFDconnected = true;
        mFDFastOpenInProgress = false;
    }

    // Ensure keepalive is configured correctly if previously enabled.
    if (mKeepaliveEnabled) {
        nsresult rv = SetKeepaliveEnabledInternal(true);
        if (NS_WARN_IF(NS_FAILED(rv))) {
            SOCKET_LOG(("  SetKeepaliveEnabledInternal failed rv[0x%" PRIx32 "]",
                        static_cast<uint32_t>(rv)));
        }
    }

    SendStatus(NS_NET_STATUS_CONNECTED_TO);
}

void
nsSocketTransport::SetSocketName(PRFileDesc *fd)
{
    MOZ_ASSERT(OnSocketThread(), "not on socket thread");
    if (mSelfAddrIsSet) {
        return;
    }

    PRNetAddr prAddr;
    memset(&prAddr, 0, sizeof(prAddr));
    if (PR_GetSockName(fd, &prAddr) == PR_SUCCESS) {
        PRNetAddrToNetAddr(&prAddr, &mSelfAddr);
        mSelfAddrIsSet = true;
    }
}

PRFileDesc *
nsSocketTransport::GetFD_Locked()
{
    mLock.AssertCurrentThreadOwns();

    // mFD is not available to the streams while disconnected.
    if (!mFDconnected)
        return nullptr;

    if (mFD.IsInitialized())
        mFDref++;

    return mFD;
}

PRFileDesc *
nsSocketTransport::GetFD_LockedAlsoDuringFastOpen()
{
    mLock.AssertCurrentThreadOwns();

    // mFD is not available to the streams while disconnected.
    if (!mFDconnected && !mFDFastOpenInProgress) {
        return nullptr;
    }

    if (mFD.IsInitialized()) {
        mFDref++;
    }

    return mFD;
}

bool
nsSocketTransport::FastOpenInProgress()
{
    mLock.AssertCurrentThreadOwns();
    return mFDFastOpenInProgress;
}

class ThunkPRClose : public Runnable
{
public:
  explicit ThunkPRClose(PRFileDesc* fd)
    : Runnable("net::ThunkPRClose")
    , mFD(fd)
  {
  }

  NS_IMETHOD Run() override
  {
    nsSocketTransport::CloseSocket(mFD,
      gSocketTransportService->IsTelemetryEnabledAndNotSleepPhase());
    return NS_OK;
  }
private:
  PRFileDesc *mFD;
};

void
STS_PRCloseOnSocketTransport(PRFileDesc *fd)
{
  if (gSocketTransportService) {
    // Can't PR_Close() a socket off STS thread. Thunk it to STS to die
    gSocketTransportService->Dispatch(new ThunkPRClose(fd), NS_DISPATCH_NORMAL);
  } else {
    // something horrible has happened
    NS_ASSERTION(gSocketTransportService, "No STS service");
  }
}

void
nsSocketTransport::ReleaseFD_Locked(PRFileDesc *fd)
{
    mLock.AssertCurrentThreadOwns();

    NS_ASSERTION(mFD == fd, "wrong fd");

    if (--mFDref == 0) {
        if (gIOService->IsNetTearingDown() &&
            ((PR_IntervalNow() - gIOService->NetTearingDownStarted()) >
             gSocketTransportService->MaxTimeForPrClosePref())) {
          // If shutdown last to long, let the socket leak and do not close it.
          SOCKET_LOG(("Intentional leak"));
        } else if (OnSocketThread()) {
            SOCKET_LOG(("nsSocketTransport: calling PR_Close [this=%p]\n", this));
            CloseSocket(mFD,
                mSocketTransportService->IsTelemetryEnabledAndNotSleepPhase());
        } else {
            // Can't PR_Close() a socket off STS thread. Thunk it to STS to die
            STS_PRCloseOnSocketTransport(mFD);
        }
        mFD = nullptr;
    }
}

//-----------------------------------------------------------------------------
// socket event handler impl

void
nsSocketTransport::OnSocketEvent(uint32_t type, nsresult status, nsISupports *param)
{
    SOCKET_LOG(("nsSocketTransport::OnSocketEvent [this=%p type=%u status=%" PRIx32 " param=%p]\n",
                this, type, static_cast<uint32_t>(status), param));

    if (NS_FAILED(mCondition)) {
        // block event since we're apparently already dead.
        SOCKET_LOG(("  blocking event [condition=%" PRIx32 "]\n",
                    static_cast<uint32_t>(mCondition)));
        //
        // notify input/output streams in case either has a pending notify.
        //
        mInput.OnSocketReady(mCondition);
        mOutput.OnSocketReady(mCondition);
        return;
    }

    switch (type) {
    case MSG_ENSURE_CONNECT:
        SOCKET_LOG(("  MSG_ENSURE_CONNECT\n"));
        //
        // ensure that we have created a socket, attached it, and have a
        // connection.
        //
        if (mState == STATE_CLOSED) {
            // Unix domain sockets are ready to connect; mNetAddr is all we
            // need. Internet address families require a DNS lookup (or possibly
            // several) before we can connect.
#if defined(XP_UNIX)
            if (mNetAddrIsSet && mNetAddr.raw.family == AF_LOCAL)
                mCondition = InitiateSocket();
            else
#endif
                mCondition = ResolveHost();

        } else {
            SOCKET_LOG(("  ignoring redundant event\n"));
        }
        break;

    case MSG_DNS_LOOKUP_COMPLETE:
        if (mDNSRequest)  // only send this if we actually resolved anything
            SendStatus(NS_NET_STATUS_RESOLVED_HOST);

        SOCKET_LOG(("  MSG_DNS_LOOKUP_COMPLETE\n"));
        mDNSRequest = nullptr;
        if (param) {
            mDNSRecord = static_cast<nsIDNSRecord *>(param);
            mDNSRecord->GetNextAddr(SocketPort(), &mNetAddr);
        }
        // status contains DNS lookup status
        if (NS_FAILED(status)) {
            // When using a HTTP proxy, NS_ERROR_UNKNOWN_HOST means the HTTP
            // proxy host is not found, so we fixup the error code.
            // For SOCKS proxies (mProxyTransparent == true), the socket
            // transport resolves the real host here, so there's no fixup
            // (see bug 226943).
            if ((status == NS_ERROR_UNKNOWN_HOST) && !mProxyTransparent &&
                !mProxyHost.IsEmpty())
                mCondition = NS_ERROR_UNKNOWN_PROXY_HOST;
            else
                mCondition = status;
        }
        else if (mState == STATE_RESOLVING) {
            mCondition = InitiateSocket();
        }
        break;

    case MSG_RETRY_INIT_SOCKET:
        mCondition = InitiateSocket();
        break;

    case MSG_INPUT_CLOSED:
        SOCKET_LOG(("  MSG_INPUT_CLOSED\n"));
        OnMsgInputClosed(status);
        break;

    case MSG_INPUT_PENDING:
        SOCKET_LOG(("  MSG_INPUT_PENDING\n"));
        OnMsgInputPending();
        break;

    case MSG_OUTPUT_CLOSED:
        SOCKET_LOG(("  MSG_OUTPUT_CLOSED\n"));
        OnMsgOutputClosed(status);
        break;

    case MSG_OUTPUT_PENDING:
        SOCKET_LOG(("  MSG_OUTPUT_PENDING\n"));
        OnMsgOutputPending();
        break;
    case MSG_TIMEOUT_CHANGED:
        SOCKET_LOG(("  MSG_TIMEOUT_CHANGED\n"));
        mPollTimeout = mTimeouts[(mState == STATE_TRANSFERRING)
          ? TIMEOUT_READ_WRITE : TIMEOUT_CONNECT];
        break;
    default:
        SOCKET_LOG(("  unhandled event!\n"));
    }

    if (NS_FAILED(mCondition)) {
        SOCKET_LOG(("  after event [this=%p cond=%"  PRIx32 "]\n", this,
                    static_cast<uint32_t>(mCondition)));
        if (!mAttached) // need to process this error ourselves...
            OnSocketDetached(nullptr);
    }
    else if (mPollFlags == PR_POLL_EXCEPT)
        mPollFlags = 0; // make idle
}

//-----------------------------------------------------------------------------
// socket handler impl

void
nsSocketTransport::OnSocketReady(PRFileDesc *fd, int16_t outFlags)
{
    SOCKET_LOG(("nsSocketTransport::OnSocketReady [this=%p outFlags=%hd]\n",
        this, outFlags));

    if (outFlags == -1) {
        SOCKET_LOG(("socket timeout expired\n"));
        mCondition = NS_ERROR_NET_TIMEOUT;
        return;
    }

    if ((mState == STATE_TRANSFERRING) && mFastOpenLayerHasBufferedData) {
        // We have some data buffered in TCPFastOpenLayer. We will flush them
        // first. We need to do this first before calling OnSocketReady below
        // so that the socket status events are kept in the correct order.
        mFastOpenLayerHasBufferedData = TCPFastOpenFlushBuffer(fd);
        if (mFastOpenLayerHasBufferedData) {
            return;
        } else {
            SendStatus(NS_NET_STATUS_SENDING_TO);
        }
        // If we are done sending the buffered data continue with the normal
        // path.
        // In case of an error, TCPFastOpenFlushBuffer will return false and
        // the normal code path will pick up the error.
        mFastOpenLayerHasBufferedData = false;
    }

    if (mState == STATE_TRANSFERRING) {
        // if waiting to write and socket is writable or hit an exception.
        if ((mPollFlags & PR_POLL_WRITE) && (outFlags & ~PR_POLL_READ)) {
            // assume that we won't need to poll any longer (the stream will
            // request that we poll again if it is still pending).
            mPollFlags &= ~PR_POLL_WRITE;
            mOutput.OnSocketReady(NS_OK);
        }
        // if waiting to read and socket is readable or hit an exception.
        if ((mPollFlags & PR_POLL_READ) && (outFlags & ~PR_POLL_WRITE)) {
            // assume that we won't need to poll any longer (the stream will
            // request that we poll again if it is still pending).
            mPollFlags &= ~PR_POLL_READ;
            mInput.OnSocketReady(NS_OK);
        }
        // Update poll timeout in case it was changed
        mPollTimeout = mTimeouts[TIMEOUT_READ_WRITE];
    }
    else if ((mState == STATE_CONNECTING) && !gIOService->IsNetTearingDown()) {
        // We do not need to do PR_ConnectContinue when we are already
        // shutting down.

        // We use PRIntervalTime here because we need
        // nsIOService::LastOfflineStateChange time and
        // nsIOService::LastConectivityChange time to be atomic.
        PRIntervalTime connectStarted = 0;
        if (gSocketTransportService->IsTelemetryEnabledAndNotSleepPhase()) {
            connectStarted = PR_IntervalNow();
        }

        PRStatus status = PR_ConnectContinue(fd, outFlags);

#if defined(_WIN64) && defined(WIN95)
#ifndef TCP_FASTOPEN
#define TCP_FASTOPEN 15
#endif

        if (mFDFastOpenInProgress && mFastOpenCallback &&
            (mFastOpenStatus == TFO_DATA_SENT)) {
            PROsfd osfd = PR_FileDesc2NativeHandle(fd);
            BOOL option = 0;
            int len = sizeof(option);
            PRInt32 rv = getsockopt((SOCKET)osfd, IPPROTO_TCP, TCP_FASTOPEN, (char*)&option, &len);
            if (!rv && !option) {
                // On error, I will let the normal necko paths pickup the error.
                mFastOpenCallback->SetFastOpenStatus(TFO_DATA_COOKIE_NOT_ACCEPTED);
            }
        }
#endif

        if (gSocketTransportService->IsTelemetryEnabledAndNotSleepPhase() &&
            connectStarted) {
            SendPRBlockingTelemetry(connectStarted,
                Telemetry::PRCONNECTCONTINUE_BLOCKING_TIME_NORMAL,
                Telemetry::PRCONNECTCONTINUE_BLOCKING_TIME_SHUTDOWN,
                Telemetry::PRCONNECTCONTINUE_BLOCKING_TIME_CONNECTIVITY_CHANGE,
                Telemetry::PRCONNECTCONTINUE_BLOCKING_TIME_LINK_CHANGE,
                Telemetry::PRCONNECTCONTINUE_BLOCKING_TIME_OFFLINE);
        }

        if (status == PR_SUCCESS) {
            //
            // we are connected!
            //
            OnSocketConnected();

            if (mSocketTransportService->IsTelemetryEnabledAndNotSleepPhase()) {
                if (mNetAddr.raw.family == AF_INET) {
                    Telemetry::Accumulate(
                        Telemetry::IPV4_AND_IPV6_ADDRESS_CONNECTIVITY,
                        SUCCESSFUL_CONNECTING_TO_IPV4_ADDRESS);
                } else if (mNetAddr.raw.family == AF_INET6) {
                    Telemetry::Accumulate(
                        Telemetry::IPV4_AND_IPV6_ADDRESS_CONNECTIVITY,
                        SUCCESSFUL_CONNECTING_TO_IPV6_ADDRESS);
                }
            }
        }
        else {
            PRErrorCode code = PR_GetError();
#if defined(TEST_CONNECT_ERRORS)
            code = RandomizeConnectError(code);
#endif
            //
            // If the connect is still not ready, then continue polling...
            //
            if ((PR_WOULD_BLOCK_ERROR == code) || (PR_IN_PROGRESS_ERROR == code)) {
                // Set up the select flags for connect...
                mPollFlags = (PR_POLL_EXCEPT | PR_POLL_WRITE);
                // Update poll timeout in case it was changed
                mPollTimeout = mTimeouts[TIMEOUT_CONNECT];
            }
            //
            // The SOCKS proxy rejected our request. Find out why.
            //
            else if (PR_UNKNOWN_ERROR == code &&
                     mProxyTransparent &&
                     !mProxyHost.IsEmpty()) {
                code = PR_GetOSError();
                mCondition = ErrorAccordingToNSPR(code);
            }
            else {
                //
                // else, the connection failed...
                //
                mCondition = ErrorAccordingToNSPR(code);
                if ((mCondition == NS_ERROR_CONNECTION_REFUSED) && !mProxyHost.IsEmpty())
                    mCondition = NS_ERROR_PROXY_CONNECTION_REFUSED;
                SOCKET_LOG(("  connection failed! [reason=%" PRIx32 "]\n",
                            static_cast<uint32_t>(mCondition)));
            }
        }
    }
    else if ((mState == STATE_CONNECTING) && gIOService->IsNetTearingDown()) {
        // We do not need to do PR_ConnectContinue when we are already
        // shutting down.
        SOCKET_LOG(("We are in shutdown so skip PR_ConnectContinue and set "
                    "and error.\n"));
        mCondition = NS_ERROR_ABORT;
    }
    else {
        NS_ERROR("unexpected socket state");
        mCondition = NS_ERROR_UNEXPECTED;
    }

    if (mPollFlags == PR_POLL_EXCEPT)
        mPollFlags = 0; // make idle
}

// called on the socket thread only
void
nsSocketTransport::OnSocketDetached(PRFileDesc *fd)
{
    SOCKET_LOG(("nsSocketTransport::OnSocketDetached [this=%p cond=%" PRIx32 "]\n",
                this, static_cast<uint32_t>(mCondition)));

    MOZ_ASSERT(OnSocketThread(), "not on socket thread");

    // if we didn't initiate this detach, then be sure to pass an error
    // condition up to our consumers.  (e.g., STS is shutting down.)
    if (NS_SUCCEEDED(mCondition)) {
        if (gIOService->IsOffline()) {
          mCondition = NS_ERROR_OFFLINE;
        }
        else {
          mCondition = NS_ERROR_ABORT;
        }
    }

    mFastOpenLayerHasBufferedData = false;

    // If we are not shutting down try again.
    if (!gIOService->IsNetTearingDown() && RecoverFromError())
        mCondition = NS_OK;
    else {
        mState = STATE_CLOSED;

        // The error can happened before we start fast open. In that case do not
        // call mFastOpenCallback->SetFastOpenConnected; If error happends during
        // fast open, inform the halfOpenSocket.
        // If we cancel the connection because backup socket was successfully
        // connected, mFDFastOpenInProgress will be true but mFastOpenCallback
        // will be nullptr.
        if (mFDFastOpenInProgress && mFastOpenCallback) {
            mFastOpenCallback->SetFastOpenConnected(mCondition, false);
        }
        mFastOpenCallback = nullptr;

        // make sure there isn't any pending DNS request
        if (mDNSRequest) {
            mDNSRequest->Cancel(NS_ERROR_ABORT);
            mDNSRequest = nullptr;
        }

        //
        // notify input/output streams
        //
        mInput.OnSocketReady(mCondition);
        mOutput.OnSocketReady(mCondition);
    }

    // If FastOpen has been used (mFDFastOpenInProgress==true),
    // mFastOpenCallback must be nullptr now. We decided to recover from
    // error like NET_TIMEOUT, CONNECTION_REFUSED or we have called
    // SetFastOpenConnected(mCondition) in this function a couple of lines
    // above.
    // If FastOpen has not been used (mFDFastOpenInProgress==false) it can be
    // that mFastOpenCallback is no null, this is the case when we recover from
    // errors like UKNOWN_HOST in which case socket was not been connected yet
    // and mFastOpenCallback-StartFastOpen was not be called yet (but we can
    // still call it in the next try).
    MOZ_ASSERT(!(mFDFastOpenInProgress && mFastOpenCallback));

    // break any potential reference cycle between the security info object
    // and ourselves by resetting its notification callbacks object.  see
    // bug 285991 for details.
    nsCOMPtr<nsISSLSocketControl> secCtrl = do_QueryInterface(mSecInfo);
    if (secCtrl)
        secCtrl->SetNotificationCallbacks(nullptr);

    // finally, release our reference to the socket (must do this within
    // the transport lock) possibly closing the socket. Also release our
    // listeners to break potential refcount cycles.

    // We should be careful not to release mEventSink and mCallbacks while
    // we're locked, because releasing it might require acquiring the lock
    // again, so we just null out mEventSink and mCallbacks while we're
    // holding the lock, and let the stack based objects' destuctors take
    // care of destroying it if needed.
    nsCOMPtr<nsIInterfaceRequestor> ourCallbacks;
    nsCOMPtr<nsITransportEventSink> ourEventSink;
    {
        MutexAutoLock lock(mLock);
        if (mFD.IsInitialized()) {
            ReleaseFD_Locked(mFD);
            // flag mFD as unusable; this prevents other consumers from
            // acquiring a reference to mFD.
            mFDconnected = false;
            mFDFastOpenInProgress = false;
        }

        // We must release mCallbacks and mEventSink to avoid memory leak
        // but only when RecoverFromError() above failed. Otherwise we lose
        // link with UI and security callbacks on next connection attempt
        // round. That would lead e.g. to a broken certificate exception page.
        if (NS_FAILED(mCondition)) {
            mCallbacks.swap(ourCallbacks);
            mEventSink.swap(ourEventSink);
        }
    }
}

void
nsSocketTransport::IsLocal(bool *aIsLocal)
{
    {
        MutexAutoLock lock(mLock);

#if defined(XP_UNIX)
        // Unix-domain sockets are always local.
        if (mNetAddr.raw.family == PR_AF_LOCAL)
        {
            *aIsLocal = true;
            return;
        }
#endif

        *aIsLocal = IsLoopBackAddress(&mNetAddr);
    }
}

//-----------------------------------------------------------------------------
// xpcom api

NS_IMPL_ISUPPORTS(nsSocketTransport,
                  nsISocketTransport,
                  nsITransport,
                  nsIDNSListener,
                  nsIClassInfo,
                  nsIInterfaceRequestor)
NS_IMPL_CI_INTERFACE_GETTER(nsSocketTransport,
                            nsISocketTransport,
                            nsITransport,
                            nsIDNSListener,
                            nsIInterfaceRequestor)

NS_IMETHODIMP
nsSocketTransport::OpenInputStream(uint32_t flags,
                                   uint32_t segsize,
                                   uint32_t segcount,
                                   nsIInputStream **result)
{
    SOCKET_LOG(("nsSocketTransport::OpenInputStream [this=%p flags=%x]\n",
        this, flags));

    NS_ENSURE_TRUE(!mInput.IsReferenced(), NS_ERROR_UNEXPECTED);

    nsresult rv;
    nsCOMPtr<nsIAsyncInputStream> pipeIn;

    if (!(flags & OPEN_UNBUFFERED) || (flags & OPEN_BLOCKING)) {
        // XXX if the caller wants blocking, then the caller also gets buffered!
        //bool openBuffered = !(flags & OPEN_UNBUFFERED);
        bool openBlocking =  (flags & OPEN_BLOCKING);

        net_ResolveSegmentParams(segsize, segcount);

        // create a pipe
        nsCOMPtr<nsIAsyncOutputStream> pipeOut;
        rv = NS_NewPipe2(getter_AddRefs(pipeIn), getter_AddRefs(pipeOut),
                         !openBlocking, true, segsize, segcount);
        if (NS_FAILED(rv)) return rv;

        // async copy from socket to pipe
        rv = NS_AsyncCopy(&mInput, pipeOut, mSocketTransportService,
                          NS_ASYNCCOPY_VIA_WRITESEGMENTS, segsize);
        if (NS_FAILED(rv)) return rv;

        *result = pipeIn;
    }
    else
        *result = &mInput;

    // flag input stream as open
    mInputClosed = false;

    rv = PostEvent(MSG_ENSURE_CONNECT);
    if (NS_FAILED(rv)) return rv;

    NS_ADDREF(*result);
    return NS_OK;
}

NS_IMETHODIMP
nsSocketTransport::OpenOutputStream(uint32_t flags,
                                    uint32_t segsize,
                                    uint32_t segcount,
                                    nsIOutputStream **result)
{
    SOCKET_LOG(("nsSocketTransport::OpenOutputStream [this=%p flags=%x]\n",
        this, flags));

    NS_ENSURE_TRUE(!mOutput.IsReferenced(), NS_ERROR_UNEXPECTED);

    nsresult rv;
    nsCOMPtr<nsIAsyncOutputStream> pipeOut;
    if (!(flags & OPEN_UNBUFFERED) || (flags & OPEN_BLOCKING)) {
        // XXX if the caller wants blocking, then the caller also gets buffered!
        //bool openBuffered = !(flags & OPEN_UNBUFFERED);
        bool openBlocking =  (flags & OPEN_BLOCKING);

        net_ResolveSegmentParams(segsize, segcount);

        // create a pipe
        nsCOMPtr<nsIAsyncInputStream> pipeIn;
        rv = NS_NewPipe2(getter_AddRefs(pipeIn), getter_AddRefs(pipeOut),
                         true, !openBlocking, segsize, segcount);
        if (NS_FAILED(rv)) return rv;

        // async copy from socket to pipe
        rv = NS_AsyncCopy(pipeIn, &mOutput, mSocketTransportService,
                          NS_ASYNCCOPY_VIA_READSEGMENTS, segsize);
        if (NS_FAILED(rv)) return rv;

        *result = pipeOut;
    }
    else
        *result = &mOutput;

    // flag output stream as open
    mOutputClosed = false;

    rv = PostEvent(MSG_ENSURE_CONNECT);
    if (NS_FAILED(rv)) return rv;

    NS_ADDREF(*result);
    return NS_OK;
}

NS_IMETHODIMP
nsSocketTransport::Close(nsresult reason)
{
    if (NS_SUCCEEDED(reason))
        reason = NS_BASE_STREAM_CLOSED;

    mDoNotRetryToConnect = true;

    if (mFDFastOpenInProgress && mFastOpenCallback) {
        mFastOpenCallback->SetFastOpenConnected(reason, false);
    }
    mFastOpenCallback = nullptr;

    mInput.CloseWithStatus(reason);
    mOutput.CloseWithStatus(reason);
    return NS_OK;
}

NS_IMETHODIMP
nsSocketTransport::GetSecurityInfo(nsISupports **secinfo)
{
    MutexAutoLock lock(mLock);
    NS_IF_ADDREF(*secinfo = mSecInfo);
    return NS_OK;
}

NS_IMETHODIMP
nsSocketTransport::GetSecurityCallbacks(nsIInterfaceRequestor **callbacks)
{
    MutexAutoLock lock(mLock);
    NS_IF_ADDREF(*callbacks = mCallbacks);
    return NS_OK;
}

NS_IMETHODIMP
nsSocketTransport::SetSecurityCallbacks(nsIInterfaceRequestor *callbacks)
{
    nsCOMPtr<nsIInterfaceRequestor> threadsafeCallbacks;
    NS_NewNotificationCallbacksAggregation(callbacks, nullptr,
                                           GetCurrentThreadEventTarget(),
                                           getter_AddRefs(threadsafeCallbacks));

    nsCOMPtr<nsISupports> secinfo;
    {
        MutexAutoLock lock(mLock);
        mCallbacks = threadsafeCallbacks;
        SOCKET_LOG(("Reset callbacks for secinfo=%p callbacks=%p\n",
                    mSecInfo.get(), mCallbacks.get()));

        secinfo = mSecInfo;
    }

    // don't call into PSM while holding mLock!!
    nsCOMPtr<nsISSLSocketControl> secCtrl(do_QueryInterface(secinfo));
    if (secCtrl)
        secCtrl->SetNotificationCallbacks(threadsafeCallbacks);

    return NS_OK;
}

NS_IMETHODIMP
nsSocketTransport::SetEventSink(nsITransportEventSink *sink,
                                nsIEventTarget *target)
{
    nsCOMPtr<nsITransportEventSink> temp;
    if (target) {
        nsresult rv = net_NewTransportEventSinkProxy(getter_AddRefs(temp),
                                                     sink, target);
        if (NS_FAILED(rv))
            return rv;
        sink = temp.get();
    }

    MutexAutoLock lock(mLock);
    mEventSink = sink;
    return NS_OK;
}

NS_IMETHODIMP
nsSocketTransport::IsAlive(bool *result)
{
    *result = false;

    // During Fast Open we need to return true here.
    if (mFDFastOpenInProgress) {
        *result = true;
        return NS_OK;
    }

    nsresult conditionWhileLocked = NS_OK;
    PRFileDescAutoLock fd(this, false, &conditionWhileLocked);
    if (NS_FAILED(conditionWhileLocked) || !fd.IsInitialized()) {
        return NS_OK;
    }

    // XXX do some idle-time based checks??

    char c;
    int32_t rval = PR_Recv(fd, &c, 1, PR_MSG_PEEK, 0);

    if ((rval > 0) || (rval < 0 && PR_GetError() == PR_WOULD_BLOCK_ERROR))
        *result = true;

    return NS_OK;
}

NS_IMETHODIMP
nsSocketTransport::GetHost(nsACString &host)
{
    host = SocketHost();
    return NS_OK;
}

NS_IMETHODIMP
nsSocketTransport::GetPort(int32_t *port)
{
    *port = (int32_t) SocketPort();
    return NS_OK;
}

NS_IMETHODIMP
nsSocketTransport::GetNetworkInterfaceId(nsACString &aNetworkInterfaceId)
{
    MOZ_ASSERT(OnSocketThread(), "not on socket thread");
    aNetworkInterfaceId = mNetworkInterfaceId;
    return NS_OK;
}

NS_IMETHODIMP
nsSocketTransport::SetNetworkInterfaceId(const nsACString &aNetworkInterfaceId)
{
    MOZ_ASSERT(OnSocketThread(), "not on socket thread");
    mNetworkInterfaceId = aNetworkInterfaceId;
    return NS_OK;
}

NS_IMETHODIMP
nsSocketTransport::GetScriptableOriginAttributes(JSContext* aCx,
    JS::MutableHandle<JS::Value> aOriginAttributes)
{
    if (NS_WARN_IF(!ToJSValue(aCx, mOriginAttributes, aOriginAttributes))) {
        return NS_ERROR_FAILURE;
    }
    return NS_OK;
}

NS_IMETHODIMP
nsSocketTransport::SetScriptableOriginAttributes(JSContext* aCx,
    JS::Handle<JS::Value> aOriginAttributes)
{
    MutexAutoLock lock(mLock);
    NS_ENSURE_FALSE(mFD.IsInitialized(), NS_ERROR_FAILURE);

    OriginAttributes attrs;
    if (!aOriginAttributes.isObject() || !attrs.Init(aCx, aOriginAttributes)) {
        return NS_ERROR_INVALID_ARG;
    }

    mOriginAttributes = attrs;
    return NS_OK;
}

nsresult
nsSocketTransport::GetOriginAttributes(OriginAttributes* aOriginAttributes)
{
    NS_ENSURE_ARG(aOriginAttributes);
    *aOriginAttributes = mOriginAttributes;
    return NS_OK;
}

nsresult
nsSocketTransport::SetOriginAttributes(const OriginAttributes& aOriginAttributes)
{
    MutexAutoLock lock(mLock);
    NS_ENSURE_FALSE(mFD.IsInitialized(), NS_ERROR_FAILURE);

    mOriginAttributes = aOriginAttributes;
    return NS_OK;
}

NS_IMETHODIMP
nsSocketTransport::GetPeerAddr(NetAddr *addr)
{
    // once we are in the connected state, mNetAddr will not change.
    // so if we can verify that we are in the connected state, then
    // we can freely access mNetAddr from any thread without being
    // inside a critical section.

    if (!mNetAddrIsSet) {
        SOCKET_LOG(("nsSocketTransport::GetPeerAddr [this=%p state=%d] "
                    "NOT_AVAILABLE because not yet connected.", this, mState));
        return NS_ERROR_NOT_AVAILABLE;
    }

    memcpy(addr, &mNetAddr, sizeof(NetAddr));
    return NS_OK;
}

NS_IMETHODIMP
nsSocketTransport::GetSelfAddr(NetAddr *addr)
{
    // once we are in the connected state, mSelfAddr will not change.
    // so if we can verify that we are in the connected state, then
    // we can freely access mSelfAddr from any thread without being
    // inside a critical section.

    if (!mSelfAddrIsSet) {
        SOCKET_LOG(("nsSocketTransport::GetSelfAddr [this=%p state=%d] "
                    "NOT_AVAILABLE because not yet connected.", this, mState));
        return NS_ERROR_NOT_AVAILABLE;
    }

    memcpy(addr, &mSelfAddr, sizeof(NetAddr));
    return NS_OK;
}

NS_IMETHODIMP
nsSocketTransport::Bind(NetAddr *aLocalAddr)
{
    NS_ENSURE_ARG(aLocalAddr);

    MutexAutoLock lock(mLock);
    if (mAttached) {
        return NS_ERROR_FAILURE;
    }

    mBindAddr = new NetAddr();
    memcpy(mBindAddr.get(), aLocalAddr, sizeof(NetAddr));

    return NS_OK;
}

NS_IMETHODIMP
nsSocketTransport::GetScriptablePeerAddr(nsINetAddr * *addr)
{
    NetAddr rawAddr;

    nsresult rv;
    rv = GetPeerAddr(&rawAddr);
    if (NS_FAILED(rv))
        return rv;

    NS_ADDREF(*addr = new nsNetAddr(&rawAddr));

    return NS_OK;
}

NS_IMETHODIMP
nsSocketTransport::GetScriptableSelfAddr(nsINetAddr * *addr)
{
    NetAddr rawAddr;

    nsresult rv;
    rv = GetSelfAddr(&rawAddr);
    if (NS_FAILED(rv))
        return rv;

    NS_ADDREF(*addr = new nsNetAddr(&rawAddr));

    return NS_OK;
}

NS_IMETHODIMP
nsSocketTransport::GetTimeout(uint32_t type, uint32_t *value)
{
    NS_ENSURE_ARG_MAX(type, nsISocketTransport::TIMEOUT_READ_WRITE);
    *value = (uint32_t) mTimeouts[type];
    return NS_OK;
}

NS_IMETHODIMP
nsSocketTransport::SetTimeout(uint32_t type, uint32_t value)
{
    NS_ENSURE_ARG_MAX(type, nsISocketTransport::TIMEOUT_READ_WRITE);
    // truncate overly large timeout values.
    mTimeouts[type] = (uint16_t) std::min<uint32_t>(value, UINT16_MAX);
    PostEvent(MSG_TIMEOUT_CHANGED);
    return NS_OK;
}

NS_IMETHODIMP
nsSocketTransport::SetReuseAddrPort(bool reuseAddrPort)
{
  mReuseAddrPort = reuseAddrPort;
  return NS_OK;
}

NS_IMETHODIMP
nsSocketTransport::SetQoSBits(uint8_t aQoSBits)
{
    // Don't do any checking here of bits.  Why?  Because as of RFC-4594
    // several different Class Selector and Assured Forwarding values
    // have been defined, but that isn't to say more won't be added later.
    // In that case, any checking would be an impediment to interoperating
    // with newer QoS definitions.

    mQoSBits = aQoSBits;
    return NS_OK;
}

NS_IMETHODIMP
nsSocketTransport::GetQoSBits(uint8_t *aQoSBits)
{
    *aQoSBits = mQoSBits;
    return NS_OK;
}

NS_IMETHODIMP
nsSocketTransport::GetRecvBufferSize(uint32_t *aSize)
{
    PRFileDescAutoLock fd(this, false);
    if (!fd.IsInitialized())
        return NS_ERROR_NOT_CONNECTED;

    nsresult rv = NS_OK;
    PRSocketOptionData opt;
    opt.option = PR_SockOpt_RecvBufferSize;
    if (PR_GetSocketOption(fd, &opt) == PR_SUCCESS)
        *aSize = opt.value.recv_buffer_size;
    else
        rv = NS_ERROR_FAILURE;

    return rv;
}

NS_IMETHODIMP
nsSocketTransport::GetSendBufferSize(uint32_t *aSize)
{
    PRFileDescAutoLock fd(this, false);
    if (!fd.IsInitialized())
        return NS_ERROR_NOT_CONNECTED;

    nsresult rv = NS_OK;
    PRSocketOptionData opt;
    opt.option = PR_SockOpt_SendBufferSize;
    if (PR_GetSocketOption(fd, &opt) == PR_SUCCESS)
        *aSize = opt.value.send_buffer_size;
    else
        rv = NS_ERROR_FAILURE;

    return rv;
}

NS_IMETHODIMP
nsSocketTransport::SetRecvBufferSize(uint32_t aSize)
{
    PRFileDescAutoLock fd(this, false);
    if (!fd.IsInitialized())
        return NS_ERROR_NOT_CONNECTED;

    nsresult rv = NS_OK;
    PRSocketOptionData opt;
    opt.option = PR_SockOpt_RecvBufferSize;
    opt.value.recv_buffer_size = aSize;
    if (PR_SetSocketOption(fd, &opt) != PR_SUCCESS)
        rv = NS_ERROR_FAILURE;

    return rv;
}

NS_IMETHODIMP
nsSocketTransport::SetSendBufferSize(uint32_t aSize)
{
    PRFileDescAutoLock fd(this, false);
    if (!fd.IsInitialized())
        return NS_ERROR_NOT_CONNECTED;

    nsresult rv = NS_OK;
    PRSocketOptionData opt;
    opt.option = PR_SockOpt_SendBufferSize;
    opt.value.send_buffer_size = aSize;
    if (PR_SetSocketOption(fd, &opt) != PR_SUCCESS)
        rv = NS_ERROR_FAILURE;

    return rv;
}

NS_IMETHODIMP
nsSocketTransport::OnLookupComplete(nsICancelable *request,
                                    nsIDNSRecord  *rec,
                                    nsresult       status)
{
    // flag host lookup complete for the benefit of the ResolveHost method.
    mResolving = false;

    nsresult rv = PostEvent(MSG_DNS_LOOKUP_COMPLETE, status, rec);

    // if posting a message fails, then we should assume that the socket
    // transport has been shutdown.  this should never happen!  if it does
    // it means that the socket transport service was shutdown before the
    // DNS service.
    if (NS_FAILED(rv))
        NS_WARNING("unable to post DNS lookup complete message");

    return NS_OK;
}

// nsIInterfaceRequestor
NS_IMETHODIMP
nsSocketTransport::GetInterface(const nsIID &iid, void **result)
{
    if (iid.Equals(NS_GET_IID(nsIDNSRecord))) {
        return mDNSRecord ?
            mDNSRecord->QueryInterface(iid, result) : NS_ERROR_NO_INTERFACE;
    }
    return this->QueryInterface(iid, result);
}

NS_IMETHODIMP
nsSocketTransport::GetInterfaces(uint32_t *count, nsIID * **array)
{
    return NS_CI_INTERFACE_GETTER_NAME(nsSocketTransport)(count, array);
}

NS_IMETHODIMP
nsSocketTransport::GetScriptableHelper(nsIXPCScriptable **_retval)
{
    *_retval = nullptr;
    return NS_OK;
}

NS_IMETHODIMP
nsSocketTransport::GetContractID(nsACString& aContractID)
{
    aContractID.SetIsVoid(true);
    return NS_OK;
}

NS_IMETHODIMP
nsSocketTransport::GetClassDescription(nsACString& aClassDescription)
{
    aClassDescription.SetIsVoid(true);
    return NS_OK;
}

NS_IMETHODIMP
nsSocketTransport::GetClassID(nsCID * *aClassID)
{
    *aClassID = nullptr;
    return NS_OK;
}

NS_IMETHODIMP
nsSocketTransport::GetFlags(uint32_t *aFlags)
{
    *aFlags = nsIClassInfo::THREADSAFE;
    return NS_OK;
}

NS_IMETHODIMP
nsSocketTransport::GetClassIDNoAlloc(nsCID *aClassIDNoAlloc)
{
    return NS_ERROR_NOT_AVAILABLE;
}


NS_IMETHODIMP
nsSocketTransport::GetConnectionFlags(uint32_t *value)
{
    *value = mConnectionFlags;
    return NS_OK;
}

NS_IMETHODIMP
nsSocketTransport::SetConnectionFlags(uint32_t value)
{
    mConnectionFlags = value;
    mIsPrivate = value & nsISocketTransport::NO_PERMANENT_STORAGE;
    return NS_OK;
}

NS_IMETHODIMP
nsSocketTransport::GetTlsFlags(uint32_t *value)
{
    *value = mTlsFlags;
    return NS_OK;
}

NS_IMETHODIMP
nsSocketTransport::SetTlsFlags(uint32_t value)
{
    mTlsFlags = value;
    return NS_OK;
}

void
nsSocketTransport::OnKeepaliveEnabledPrefChange(bool aEnabled)
{
    MOZ_ASSERT(OnSocketThread(), "not on socket thread");

    // The global pref toggles keepalive as a system feature; it only affects
    // an individual socket if keepalive has been specifically enabled for it.
    // So, ensure keepalive is configured correctly if previously enabled.
    if (mKeepaliveEnabled) {
        nsresult rv = SetKeepaliveEnabledInternal(aEnabled);
        if (NS_WARN_IF(NS_FAILED(rv))) {
            SOCKET_LOG(("  SetKeepaliveEnabledInternal [%s] failed rv[0x%" PRIx32 "]",
                        aEnabled ? "enable" : "disable", static_cast<uint32_t>(rv)));
        }
    }
}

nsresult
nsSocketTransport::SetKeepaliveEnabledInternal(bool aEnable)
{
    MOZ_ASSERT(mKeepaliveIdleTimeS > 0 &&
               mKeepaliveIdleTimeS <= kMaxTCPKeepIdle);
    MOZ_ASSERT(mKeepaliveRetryIntervalS > 0 &&
               mKeepaliveRetryIntervalS <= kMaxTCPKeepIntvl);
    MOZ_ASSERT(mKeepaliveProbeCount > 0 &&
               mKeepaliveProbeCount <= kMaxTCPKeepCount);

    PRFileDescAutoLock fd(this, true);
    if (NS_WARN_IF(!fd.IsInitialized())) {
        return NS_ERROR_NOT_INITIALIZED;
    }

    // Only enable if keepalives are globally enabled, but ensure other
    // options are set correctly on the fd.
    bool enable = aEnable && mSocketTransportService->IsKeepaliveEnabled();
    nsresult rv = fd.SetKeepaliveVals(enable,
                                      mKeepaliveIdleTimeS,
                                      mKeepaliveRetryIntervalS,
                                      mKeepaliveProbeCount);
    if (NS_WARN_IF(NS_FAILED(rv))) {
        SOCKET_LOG(("  SetKeepaliveVals failed rv[0x%" PRIx32 "]", static_cast<uint32_t>(rv)));
        return rv;
    }
    rv = fd.SetKeepaliveEnabled(enable);
    if (NS_WARN_IF(NS_FAILED(rv))) {
        SOCKET_LOG(("  SetKeepaliveEnabled failed rv[0x%" PRIx32 "]", static_cast<uint32_t>(rv)));
        return rv;
    }
    return NS_OK;
}

NS_IMETHODIMP
nsSocketTransport::GetKeepaliveEnabled(bool *aResult)
{
    MOZ_ASSERT(aResult);

    *aResult = mKeepaliveEnabled;
    return NS_OK;
}

nsresult
nsSocketTransport::EnsureKeepaliveValsAreInitialized()
{
    nsresult rv = NS_OK;
    int32_t val = -1;
    if (mKeepaliveIdleTimeS == -1) {
        rv = mSocketTransportService->GetKeepaliveIdleTime(&val);
        if (NS_WARN_IF(NS_FAILED(rv))) {
            return rv;
        }
        mKeepaliveIdleTimeS = val;
    }
    if (mKeepaliveRetryIntervalS == -1) {
        rv = mSocketTransportService->GetKeepaliveRetryInterval(&val);
        if (NS_WARN_IF(NS_FAILED(rv))) {
            return rv;
        }
        mKeepaliveRetryIntervalS = val;
    }
    if (mKeepaliveProbeCount == -1) {
        rv = mSocketTransportService->GetKeepaliveProbeCount(&val);
        if (NS_WARN_IF(NS_FAILED(rv))) {
            return rv;
        }
        mKeepaliveProbeCount = val;
    }
    return NS_OK;
}

NS_IMETHODIMP
nsSocketTransport::SetKeepaliveEnabled(bool aEnable)
{
#if defined(XP_WIN) || defined(XP_UNIX) || defined(XP_MACOSX)
    MOZ_ASSERT(OnSocketThread(), "not on socket thread");

    if (aEnable == mKeepaliveEnabled) {
        SOCKET_LOG(("nsSocketTransport::SetKeepaliveEnabled [%p] already %s.",
                    this, aEnable ? "enabled" : "disabled"));
        return NS_OK;
    }

    nsresult rv = NS_OK;
    if (aEnable) {
        rv = EnsureKeepaliveValsAreInitialized();
        if (NS_WARN_IF(NS_FAILED(rv))) {
            SOCKET_LOG(("  SetKeepaliveEnabled [%p] "
                        "error [0x%" PRIx32 "] initializing keepalive vals",
                        this, static_cast<uint32_t>(rv)));
            return rv;
        }
    }
    SOCKET_LOG(("nsSocketTransport::SetKeepaliveEnabled [%p] "
                "%s, idle time[%ds] retry interval[%ds] packet count[%d]: "
                "globally %s.",
                this, aEnable ? "enabled" : "disabled",
                mKeepaliveIdleTimeS, mKeepaliveRetryIntervalS,
                mKeepaliveProbeCount,
                mSocketTransportService->IsKeepaliveEnabled() ?
                "enabled" : "disabled"));

    // Set mKeepaliveEnabled here so that state is maintained; it is possible
    // that we're in between fds, e.g. the 1st IP address failed, so we're about
    // to retry on a 2nd from the DNS record.
    mKeepaliveEnabled = aEnable;

    rv = SetKeepaliveEnabledInternal(aEnable);
    if (NS_WARN_IF(NS_FAILED(rv))) {
        SOCKET_LOG(("  SetKeepaliveEnabledInternal failed rv[0x%" PRIx32 "]",
                    static_cast<uint32_t>(rv)));
        return rv;
    }

    return NS_OK;
#else /* !(defined(XP_WIN) || defined(XP_UNIX) || defined(XP_MACOSX)) */
    SOCKET_LOG(("nsSocketTransport::SetKeepaliveEnabled unsupported platform"));
    return NS_ERROR_NOT_IMPLEMENTED;
#endif
}

NS_IMETHODIMP
nsSocketTransport::SetKeepaliveVals(int32_t aIdleTime,
                                    int32_t aRetryInterval)
{
#if defined(XP_WIN) || defined(XP_UNIX) || defined(XP_MACOSX)
    MOZ_ASSERT(OnSocketThread(), "not on socket thread");
    if (NS_WARN_IF(aIdleTime <= 0 || kMaxTCPKeepIdle < aIdleTime)) {
        return NS_ERROR_INVALID_ARG;
    }
    if (NS_WARN_IF(aRetryInterval <= 0 ||
                   kMaxTCPKeepIntvl < aRetryInterval)) {
        return NS_ERROR_INVALID_ARG;
    }

    if (aIdleTime == mKeepaliveIdleTimeS &&
        aRetryInterval == mKeepaliveRetryIntervalS) {
        SOCKET_LOG(("nsSocketTransport::SetKeepaliveVals [%p] idle time "
                    "already %ds and retry interval already %ds.",
                    this, mKeepaliveIdleTimeS,
                    mKeepaliveRetryIntervalS));
        return NS_OK;
    }
    mKeepaliveIdleTimeS = aIdleTime;
    mKeepaliveRetryIntervalS = aRetryInterval;

    nsresult rv = NS_OK;
    if (mKeepaliveProbeCount == -1) {
        int32_t val = -1;
        nsresult rv = mSocketTransportService->GetKeepaliveProbeCount(&val);
        if (NS_WARN_IF(NS_FAILED(rv))) {
            return rv;
        }
        mKeepaliveProbeCount = val;
    }

    SOCKET_LOG(("nsSocketTransport::SetKeepaliveVals [%p] "
                "keepalive %s, idle time[%ds] retry interval[%ds] "
                "packet count[%d]",
                this, mKeepaliveEnabled ? "enabled" : "disabled",
                mKeepaliveIdleTimeS, mKeepaliveRetryIntervalS,
                mKeepaliveProbeCount));

    PRFileDescAutoLock fd(this, true);
    if (NS_WARN_IF(!fd.IsInitialized())) {
        return NS_ERROR_NULL_POINTER;
    }

    rv = fd.SetKeepaliveVals(mKeepaliveEnabled,
                             mKeepaliveIdleTimeS,
                             mKeepaliveRetryIntervalS,
                             mKeepaliveProbeCount);
    if (NS_WARN_IF(NS_FAILED(rv))) {
        return rv;
    }
    return NS_OK;
#else
    SOCKET_LOG(("nsSocketTransport::SetKeepaliveVals unsupported platform"));
    return NS_ERROR_NOT_IMPLEMENTED;
#endif
}

#ifdef ENABLE_SOCKET_TRACING

#include <stdio.h>
#include <ctype.h>
#include "prenv.h"

static void
DumpBytesToFile(const char *path, const char *header, const char *buf, int32_t n)
{
    FILE *fp = fopen(path, "a");

    fprintf(fp, "\n%s [%d bytes]\n", header, n);

    const unsigned char *p;
    while (n) {
        p = (const unsigned char *) buf;

        int32_t i, row_max = std::min(16, n);

        for (i = 0; i < row_max; ++i)
            fprintf(fp, "%02x  ", *p++);
        for (i = row_max; i < 16; ++i)
            fprintf(fp, "    ");

        p = (const unsigned char *) buf;
        for (i = 0; i < row_max; ++i, ++p) {
            if (isprint(*p))
                fprintf(fp, "%c", *p);
            else
                fprintf(fp, ".");
        }

        fprintf(fp, "\n");
        buf += row_max;
        n -= row_max;
    }

    fprintf(fp, "\n");
    fclose(fp);
}

void
nsSocketTransport::TraceInBuf(const char *buf, int32_t n)
{
    char *val = PR_GetEnv("NECKO_SOCKET_TRACE_LOG");
    if (!val || !*val)
        return;

    nsAutoCString header;
    header.AssignLiteral("Reading from: ");
    header.Append(mHost);
    header.Append(':');
    header.AppendInt(mPort);

    DumpBytesToFile(val, header.get(), buf, n);
}

void
nsSocketTransport::TraceOutBuf(const char *buf, int32_t n)
{
    char *val = PR_GetEnv("NECKO_SOCKET_TRACE_LOG");
    if (!val || !*val)
        return;

    nsAutoCString header;
    header.AssignLiteral("Writing to: ");
    header.Append(mHost);
    header.Append(':');
    header.AppendInt(mPort);

    DumpBytesToFile(val, header.get(), buf, n);
}

#endif

static void LogNSPRError(const char* aPrefix, const void *aObjPtr)
{
#if defined(DEBUG)
    PRErrorCode errCode = PR_GetError();
    int errLen = PR_GetErrorTextLength();
    nsAutoCString errStr;
    if (errLen > 0) {
        errStr.SetLength(errLen);
        PR_GetErrorText(errStr.BeginWriting());
    }
    NS_WARNING(nsPrintfCString(
               "%s [%p] NSPR error[0x%x] %s.",
               aPrefix ? aPrefix : "nsSocketTransport", aObjPtr, errCode,
               errLen > 0 ? errStr.BeginReading() : "<no error text>").get());
#endif
}

nsresult
nsSocketTransport::PRFileDescAutoLock::SetKeepaliveEnabled(bool aEnable)
{
    MOZ_ASSERT(OnSocketThread(), "not on socket thread");
    MOZ_ASSERT(!(aEnable && !gSocketTransportService->IsKeepaliveEnabled()),
               "Cannot enable keepalive if global pref is disabled!");
    if (aEnable && !gSocketTransportService->IsKeepaliveEnabled()) {
        return NS_ERROR_ILLEGAL_VALUE;
    }

    PRSocketOptionData opt;

    opt.option = PR_SockOpt_Keepalive;
    opt.value.keep_alive = aEnable;
    PRStatus status = PR_SetSocketOption(mFd, &opt);
    if (NS_WARN_IF(status != PR_SUCCESS)) {
        LogNSPRError("nsSocketTransport::PRFileDescAutoLock::SetKeepaliveEnabled",
                     mSocketTransport);
        return ErrorAccordingToNSPR(PR_GetError());
    }
    return NS_OK;
}

static void LogOSError(const char *aPrefix, const void *aObjPtr)
{
#if defined(DEBUG)
    MOZ_ASSERT(OnSocketThread(), "not on socket thread");

#ifdef XP_WIN
    DWORD errCode = WSAGetLastError();
    LPVOID errMessage;
    FormatMessage(FORMAT_MESSAGE_ALLOCATE_BUFFER |
                  FORMAT_MESSAGE_FROM_SYSTEM |
                  FORMAT_MESSAGE_IGNORE_INSERTS,
                  NULL,
                  errCode,
                  MAKELANGID(LANG_NEUTRAL, SUBLANG_DEFAULT),
                  (LPTSTR) &errMessage,
                  0, NULL);
#else
    int errCode = errno;
    char *errMessage = strerror(errno);
#endif
    NS_WARNING(nsPrintfCString(
               "%s [%p] OS error[0x%x] %s",
               aPrefix ? aPrefix : "nsSocketTransport", aObjPtr, errCode,
               errMessage ? errMessage : "<no error text>").get());
#ifdef XP_WIN
    LocalFree(errMessage);
#endif
#endif
}

/* XXX PR_SetSockOpt does not support setting keepalive values, so native
 * handles and platform specific apis (setsockopt, WSAIOCtl) are used in this
 * file. Requires inclusion of NSPR private/pprio.h, and platform headers.
 */

nsresult
nsSocketTransport::PRFileDescAutoLock::SetKeepaliveVals(bool aEnabled,
                                                        int aIdleTime,
                                                        int aRetryInterval,
                                                        int aProbeCount)
{
#if defined(XP_WIN) || defined(XP_UNIX) || defined(XP_MACOSX)
    MOZ_ASSERT(OnSocketThread(), "not on socket thread");
    if (NS_WARN_IF(aIdleTime <= 0 || kMaxTCPKeepIdle < aIdleTime)) {
        return NS_ERROR_INVALID_ARG;
    }
    if (NS_WARN_IF(aRetryInterval <= 0 ||
                   kMaxTCPKeepIntvl < aRetryInterval)) {
        return NS_ERROR_INVALID_ARG;
    }
    if (NS_WARN_IF(aProbeCount <= 0 || kMaxTCPKeepCount < aProbeCount)) {
        return NS_ERROR_INVALID_ARG;
    }

    PROsfd sock = PR_FileDesc2NativeHandle(mFd);
    if (NS_WARN_IF(sock == -1)) {
        LogNSPRError("nsSocketTransport::PRFileDescAutoLock::SetKeepaliveVals",
                     mSocketTransport);
        return ErrorAccordingToNSPR(PR_GetError());
    }
#endif

#if defined(XP_WIN)
    // Windows allows idle time and retry interval to be set; NOT ping count.
    struct tcp_keepalive keepalive_vals = {
        (u_long)aEnabled,
        // Windows uses msec.
        (u_long)(aIdleTime * 1000UL),
        (u_long)(aRetryInterval * 1000UL)
    };
    DWORD bytes_returned;
    int err = WSAIoctl(sock, SIO_KEEPALIVE_VALS, &keepalive_vals,
                       sizeof(keepalive_vals), NULL, 0, &bytes_returned, NULL,
                       NULL);
    if (NS_WARN_IF(err)) {
        LogOSError("nsSocketTransport WSAIoctl failed", mSocketTransport);
        return NS_ERROR_UNEXPECTED;
    }
    return NS_OK;

#elif defined(XP_DARWIN)
    // Darwin uses sec; only supports idle time being set.
    int err = setsockopt(sock, IPPROTO_TCP, TCP_KEEPALIVE,
                         &aIdleTime, sizeof(aIdleTime));
    if (NS_WARN_IF(err)) {
        LogOSError("nsSocketTransport Failed setting TCP_KEEPALIVE",
                   mSocketTransport);
        return NS_ERROR_UNEXPECTED;
    }
    return NS_OK;

#elif defined(XP_UNIX)
    // Not all *nix OSes support the following setsockopt() options
    // ... but we assume they are supported in the Android kernel;
    // build errors will tell us if they are not.
#if defined(ANDROID) || defined(TCP_KEEPIDLE)
    // Idle time until first keepalive probe; interval between ack'd probes; seconds.
    int err = setsockopt(sock, IPPROTO_TCP, TCP_KEEPIDLE,
                         &aIdleTime, sizeof(aIdleTime));
    if (NS_WARN_IF(err)) {
        LogOSError("nsSocketTransport Failed setting TCP_KEEPIDLE",
                   mSocketTransport);
        return NS_ERROR_UNEXPECTED;
    }

#endif
#if defined(ANDROID) || defined(TCP_KEEPINTVL)
    // Interval between unack'd keepalive probes; seconds.
    err = setsockopt(sock, IPPROTO_TCP, TCP_KEEPINTVL,
                        &aRetryInterval, sizeof(aRetryInterval));
    if (NS_WARN_IF(err)) {
        LogOSError("nsSocketTransport Failed setting TCP_KEEPINTVL",
                   mSocketTransport);
        return NS_ERROR_UNEXPECTED;
    }

#endif
#if defined(ANDROID) || defined(TCP_KEEPCNT)
    // Number of unack'd keepalive probes before connection times out.
    err = setsockopt(sock, IPPROTO_TCP, TCP_KEEPCNT,
                     &aProbeCount, sizeof(aProbeCount));
    if (NS_WARN_IF(err)) {
        LogOSError("nsSocketTransport Failed setting TCP_KEEPCNT",
                   mSocketTransport);
        return NS_ERROR_UNEXPECTED;
    }

#endif
    return NS_OK;
#else
    MOZ_ASSERT(false, "nsSocketTransport::PRFileDescAutoLock::SetKeepaliveVals "
               "called on unsupported platform!");
    return NS_ERROR_UNEXPECTED;
#endif
}

void
nsSocketTransport::CloseSocket(PRFileDesc *aFd, bool aTelemetryEnabled)
{
#if defined(XP_WIN)
    AttachShutdownLayer(aFd);
#endif

    // We use PRIntervalTime here because we need
    // nsIOService::LastOfflineStateChange time and
    // nsIOService::LastConectivityChange time to be atomic.
    PRIntervalTime closeStarted;
    if (aTelemetryEnabled) {
        closeStarted = PR_IntervalNow();
    }

    PR_Close(aFd);


    if (aTelemetryEnabled) {
        SendPRBlockingTelemetry(closeStarted,
            Telemetry::PRCLOSE_TCP_BLOCKING_TIME_NORMAL,
            Telemetry::PRCLOSE_TCP_BLOCKING_TIME_SHUTDOWN,
            Telemetry::PRCLOSE_TCP_BLOCKING_TIME_CONNECTIVITY_CHANGE,
            Telemetry::PRCLOSE_TCP_BLOCKING_TIME_LINK_CHANGE,
            Telemetry::PRCLOSE_TCP_BLOCKING_TIME_OFFLINE);
    }
}

void
nsSocketTransport::SendPRBlockingTelemetry(PRIntervalTime aStart,
                                           Telemetry::HistogramID aIDNormal,
                                           Telemetry::HistogramID aIDShutdown,
                                           Telemetry::HistogramID aIDConnectivityChange,
                                           Telemetry::HistogramID aIDLinkChange,
                                           Telemetry::HistogramID aIDOffline)
{
    PRIntervalTime now = PR_IntervalNow();
    if (gIOService->IsNetTearingDown()) {
        Telemetry::Accumulate(aIDShutdown,
                              PR_IntervalToMilliseconds(now - aStart));

    } else if (PR_IntervalToSeconds(now - gIOService->LastConnectivityChange())
               < 60) {
        Telemetry::Accumulate(aIDConnectivityChange,
                              PR_IntervalToMilliseconds(now - aStart));
    } else if (PR_IntervalToSeconds(now - gIOService->LastNetworkLinkChange())
               < 60) {
        Telemetry::Accumulate(aIDLinkChange,
                              PR_IntervalToMilliseconds(now - aStart));

    } else if (PR_IntervalToSeconds(now - gIOService->LastOfflineStateChange())
               < 60) {
        Telemetry::Accumulate(aIDOffline,
                              PR_IntervalToMilliseconds(now - aStart));
    } else {
        Telemetry::Accumulate(aIDNormal,
                              PR_IntervalToMilliseconds(now - aStart));
    }
}

NS_IMETHODIMP
nsSocketTransport::SetFastOpenCallback(TCPFastOpen *aFastOpen)
{
  mFastOpenCallback = aFastOpen;
  return NS_OK;
}

NS_IMETHODIMP
nsSocketTransport::GetFirstRetryError(nsresult *aFirstRetryError)
{
  *aFirstRetryError = mFirstRetryError;
  return NS_OK;
}

} // namespace net
} // namespace mozilla