#!/usr/bin/perl
#
# Requires: tinder-defaults.pl
#
# Intent: This is becoming a general-purpose tinderbox
#         script, specific uses (mozilla, commercial, etc.) should
#         set variables and then call into this script.
#
# Status: In the process of re-arranging things so a commercial
#         version can re-use this script.
#

require 5.003;

use Sys::Hostname;
use strict;
use POSIX qw(sys_wait_h strftime);
use Cwd;
use File::Basename; # for basename();
use Config; # for $Config{sig_name} and $Config{sig_num}
$::UtilsVersion = '$Revision: 1.2 $ ';

package TinderUtils;

#
# Driver script should call into this file like this:
#   TinderUtils::Setup()
#   tree_specific_overrides()
#   TinderUtils::Build($args);
#

sub Setup {
  InitVars();
  my $args = ParseArgs();
  LoadConfig();
  ApplyArgs($args); # Apply command-line arguments after the config file.
  GetSystemInfo();
  SetupEnv();
  SetupPath();
}


sub Build {
  #my () = @_;

  BuildIt();
}


sub PrintUsage {
    die <<END_USAGE
    usage: $0 [options]
Options:
  --depend               Build depend (must have this option or clobber).
  --clobber              Build clobber.
  --example-config       Print an example 'tinder-config.pl'.
  --display DISPLAY      Set DISPLAY for tests.
  --once                 Do not loop.
  --noreport             Do not report status to tinderbox server.
  --nofinalreport        Do not report final status, only start status.
  --notest               Do not run smoke tests.
  --testonly             Only run the smoke tests (do not pull or build).
  --notimestamp          Do not pull by date.
   -tag TREETAG          Pull by tag (-r TREETAG).
   -t TREENAME           The name of the tree
  --mozconfig FILENAME   Provide a mozconfig file for client.mk to use.
  --version              Print the version number (same as cvs revision).
  --help
More details:
  To get started, run '$0 --example-config'.
END_USAGE
}


sub ParseArgs {
    PrintUsage() if $#ARGV == -1;

    my $args = {};
    my $arg;
    while ($arg = shift @ARGV) {
        $args->{BuildDepend} = 0, next if $arg eq '--clobber';
        $args->{BuildDepend} = 1, next if $arg eq '--depend';
        TinderUtils::PrintExampleConfig(), exit if $arg eq '--example-config';
        PrintUsage(), exit if $arg eq '--help' or $arg eq '-h';
        $args->{ReportStatus} = 0, next if $arg eq '--noreport';
        $args->{ReportFinalStatus} = 0, next if $arg eq '--nofinalreport';
        $args->{RunTest} = 0, next if $arg eq '--notest';
        $args->{TestOnly} = 1, next if $arg eq '--testonly';
        $args->{BuildOnce} = 1, next if $arg eq '--once';
        $args->{UseTimeStamp} = 0, next if $arg eq '--notimestamp';
        
        my %args_with_options = qw(
            --display DisplayServer
            -tag BuildTag
            -t BuildTree
            --mozconfig MozConfigFileName
        );
        if (defined $args_with_options{$arg}) {
            my $arg_arg = shift @ARGV;
            PrintUsage() if $arg_arg eq '' or $arg_arg =~ /^-/;
            $args->{$args_with_options{$arg}} = $arg_arg;
        } elsif ($arg eq '--version' or $arg eq '-v') {
            die "$0: version" . substr($::Version,9,6) . "\n";
        } else {
            warn "Error: Unknown option: $arg\n";
            PrintUsage();
        }
    }



    return $args;
}

sub ApplyArgs {
    my ($args) = @_;

    my ($variable_name, $value);
    while (($variable_name, $value) = each %{$args}) {
        eval "\$Settings::$variable_name = \"$value\";";
	}
}


{
  my $tinder_defaults = "tinder-defaults.pl";
  
  sub InitVars {
    local $_;
    for (@ARGV) {
	  # Save DATA section for printing the example.
	  return if /^--example-config$/;
    }
    no strict 'vars';
	
	open DEFAULTS, $tinder_defaults or print "can't open $tinder_defaults, $?\n";
	
    while (<DEFAULTS>) {
      package Settings;
      #warn "config:$_";
      eval;
    }
	
	close DEFAULTS;
  }
  
  sub PrintExampleConfig {
    local $_;
    print "#- tinder-config.pl - Tinderbox configuration file.\n";
    print "#-    Uncomment the variables you need to set.\n";
    print "#-    The default values are the same as the commented variables.\n";
    print "\n";
    
	open DEFAULTS, $tinder_defaults or print "can't open $tinder_defaults, $!\n";
    while (<DEFAULTS>) {
	  s/^\$/\#\$/;
	  print;
    }
	close DEFAULTS;
  }
}



sub GetSystemInfo {
    $Settings::OS = `uname -s`;
    my $os_ver = `uname -r`;
    $Settings::CPU = `uname -m`;
    #$Settings::ObjDir = '';
    my $build_type = $Settings::BuildDepend ? 'Depend' : 'Clobber';
    my $host = ::hostname();
    $host =~ s/\..*$//;
    
    chomp($Settings::OS, $os_ver, $Settings::CPU, $host);
    
    if ($Settings::OS eq 'AIX') {
        my $osAltVer = `uname -v`;
        chomp($osAltVer);
        $os_ver = "$osAltVer.$os_ver";
    }
    
    $Settings::OS = 'BSD_OS' if $Settings::OS eq 'BSD/OS';
    $Settings::OS = 'IRIX'   if $Settings::OS eq 'IRIX64';
    
    if ($Settings::OS eq 'QNX') {
        $os_ver = `uname -v`;
        chomp($os_ver);
        $os_ver =~ s/^([0-9])([0-9]*)$/$1.$2/;
    }
    if ($Settings::OS eq 'SCO_SV') {
        $Settings::OS = 'SCOOS';
        $os_ver = '5.0';
    }
    
    $Settings::BuildName = "$host $Settings::OS ${os_ver} $build_type";
    $Settings::DirName = "${Settings::OS}_${os_ver}_$build_type";
    
    # Make the build names reflect architecture/OS
    
    if ($Settings::OS eq 'AIX') {
        # $Settings::BuildName set above.
    }
    if ($Settings::OS eq 'BSD_OS') {
        $Settings::BuildName = "$host BSD/OS $os_ver $build_type";
    }
    if ($Settings::OS eq 'FreeBSD') {
        $Settings::BuildName = "$host $Settings::OS/$Settings::CPU $os_ver $build_type";
    }
    if ($Settings::OS eq 'HP-UX') {
        $Settings::BuildName = "$host $Settings::OS $os_ver $build_type";
    }
    if ($Settings::OS eq 'IRIX') {
        # $Settings::BuildName set above.
    }
    if ($Settings::OS eq 'Linux') {
        if ($Settings::CPU eq 'alpha' or $Settings::CPU eq 'sparc') {
            $Settings::BuildName = "$host $Settings::OS/$Settings::CPU $os_ver $build_type";
        } elsif ($Settings::CPU eq 'armv4l' or $Settings::CPU eq 'sa110') {
            $Settings::BuildName = "$host $Settings::OS/arm $os_ver $build_type";
        } elsif ($Settings::CPU eq 'ppc') {
            $Settings::BuildName = "$host $Settings::OS/$Settings::CPU $os_ver $build_type";
        } elsif ($Settings::CPU eq 'i686') {
            $Settings::BuildName = "$host $Settings::OS $build_type";
        } else {
            # $Settings::BuildName set above
        }
    }
    if ($Settings::OS eq 'NetBSD') {
        $Settings::BuildName = "$host $Settings::OS/$Settings::CPU $os_ver $build_type";
    }
    if ($Settings::OS eq 'OSF1') {
        # Assumes 4.0D for now.
    }
    if ($Settings::OS eq 'QNX') {
    }
    if ($Settings::OS eq 'SunOS') {
        if ($Settings::CPU eq 'i86pc') {
            $Settings::BuildName = "$host $Settings::OS/i386 $os_ver $build_type";
        } else {
            $Settings::OSVerMajor = substr($os_ver, 0, 1);
            if ($Settings::OSVerMajor ne '4') {
                $Settings::BuildName = "$host $Settings::OS/sparc $os_ver $build_type";
            }
        }
    }
    $Settings::BuildName .= " $Settings::BuildNameExtra";
}

sub LoadConfig {
    if (-r 'tinder-config.pl') {
	no strict 'vars';

	open CONFIG, 'tinder-config.pl' or 
	    print "can't open tinder-config.pl, $?\n";
	
	while (<CONFIG>) {
	    package Settings;
	    #warn "config:$_";
	    eval;
	}
	
	close CONFIG;
    } else {
        warn "Error: Need tinderbox config file, tinder-config.pl\n";
        warn "       To get started, run the following,\n";
        warn "          $0 --example-config > tinder-config.pl\n";
        exit;
    }
}

sub SetupEnv {
    umask 0;
    my $topsrcdir = "$Settings::BaseDir/$Settings::DirName/mozilla";

	if ($Settings::ObjDir ne '') {
	  $ENV{LD_LIBRARY_PATH} = "$topsrcdir/${Settings::ObjDir}/dist/bin:"
		                      . "$ENV{LD_LIBRARY_PATH}";
	} else {
	  $ENV{LD_LIBRARY_PATH} = "$topsrcdir/dist/bin:"
		                      . "$ENV{LD_LIBRARY_PATH}";	  
	}

    $ENV{LIBPATH} = "$topsrcdir/${Settings::ObjDir}/dist/bin:"
                          . "$ENV{LIBPATH}";
    $ENV{MOZILLA_FIVE_HOME} = "$topsrcdir/${Settings::ObjDir}/dist/bin";
    $ENV{DISPLAY} = $Settings::DisplayServer;
    $ENV{MOZCONFIG} = "$Settings::BaseDir/$Settings::MozConfigFileName" 
      if $Settings::MozConfigFileName ne '' and -e $Settings::MozConfigFileName;
}

sub SetupPath {
    #print "Path before: $ENV{PATH}\n";
    $ENV{PATH} .= ":$Settings::BaseDir/$Settings::DirName/mozilla/${Settings::ObjDir}/dist/bin";
    if ($Settings::OS eq 'AIX') {
        $ENV{PATH} = "/builds/local/bin:$ENV{PATH}:/usr/lpp/xlC/bin";
        $Settings::ConfigureArgs   .= '--x-includes=/usr/include/X11 '
          . '--x-libraries=/usr/lib --disable-shared';
        $Settings::ConfigureEnvArgs = 'CC=xlC_r CXX=xlC_r';
        $Settings::Compiler = 'xlC_r';
        $Settings::NSPRArgs .= 'NS_USE_NATIVE=1 USE_PTHREADS=1';
    }
    
    if ($Settings::OS eq 'BSD_OS') {
        $ENV{PATH}        = "/usr/contrib/bin:/bin:/usr/bin:$ENV{PATH}";
        $Settings::ConfigureArgs .= '--disable-shared';
        $Settings::ConfigureEnvArgs = 'CC=shlicc2 CXX=shlicc2';
        $Settings::Compiler = 'shlicc2';
        $Settings::mail = '/usr/ucb/mail';
        # Because ld dies if it encounters -include
        $Settings::MakeOverrides = 'CPP_PROG_LINK=0 CCF=shlicc2';
        $Settings::NSPRArgs .= 'NS_USE_GCC=1 NS_USE_NATIVE=';
    }
    
    if ($Settings::OS eq 'FreeBSD') {
        $ENV{PATH} = "/bin:/usr/bin:$ENV{PATH}";
        if ($ENV{HOST} eq 'angelus.mcom.com') {
            $Settings::ConfigureEnvArgs = 'CC=egcc CXX=eg++';
            $Settings::Compiler = 'egcc';
        }
        $Settings::mail = '/usr/bin/mail';
    }
    
    if ($Settings::OS eq 'HP-UX') {
        $ENV{PATH} = "/opt/ansic/bin:/opt/aCC/bin:/builds/local/bin:"
          . "$ENV{PATH}";
        $ENV{LPATH} = "/usr/lib:$ENV{LD_LIBRARY_PATH}:/builds/local/lib";
        $ENV{SHLIB_PATH} = $ENV{LPATH};
        $Settings::ConfigureArgs   .= '--x-includes=/usr/include/X11 '
          . '--x-libraries=/usr/lib --disable-gtktest ';
        $Settings::ConfigureEnvArgs = 'CC="cc -Ae" CXX="aCC -ext"';
        $Settings::Compiler = 'cc/aCC';
        # Use USE_PTHREADS=1 instead of CLASSIC_NSPR if DCE is installed.
        $Settings::NSPRArgs .= 'NS_USE_NATIVE=1 CLASSIC_NSPR=1';
    }
    
    if ($Settings::OS eq 'IRIX') {
        $ENV{PATH} = "/opt/bin:$ENV{PATH}";
        $ENV{LD_LIBRARY_PATH}   .= ':/opt/lib';
        $ENV{LD_LIBRARYN32_PATH} = $ENV{LD_LIBRARY_PATH};
        $Settings::ConfigureEnvArgs = 'CC=cc CXX=CC CFLAGS="-n32 -O" CXXFLAGS="-n32 -O"';
        $Settings::Compiler = 'cc/CC';
        $Settings::NSPRArgs .= 'NS_USE_NATIVE=1 USE_PTHREADS=1';
    }
    
    if ($Settings::OS eq 'NetBSD') {
        $ENV{PATH} = "/bin:/usr/bin:$ENV{PATH}";
        $ENV{LD_LIBRARY_PATH} .= ':/usr/X11R6/lib';
        $Settings::ConfigureEnvArgs = 'CC=egcc CXX=eg++';
        $Settings::Compiler = 'egcc';
        $Settings::mail = '/usr/bin/mail';
    }
    
    if ($Settings::OS eq 'OSF1') {
        $ENV{PATH} = "/usr/gnu/bin:$ENV{PATH}";
        $ENV{LD_LIBRARY_PATH} .= ':/usr/gnu/lib';
        $Settings::ConfigureEnvArgs = 'CC="cc -readonly_strings" CXX="cxx"';
        $Settings::Compiler = 'cc/cxx';
        $Settings::MakeOverrides = 'SHELL=/usr/bin/ksh';
        $Settings::NSPRArgs .= 'NS_USE_NATIVE=1 USE_PTHREADS=1';
        $Settings::ShellOverride = '/usr/bin/ksh';
    }
    
    if ($Settings::OS eq 'QNX') {
        $ENV{PATH} = "/usr/local/bin:$ENV{PATH}";
        $ENV{LD_LIBRARY_PATH} .= ':/usr/X11/lib';
        $Settings::ConfigureArgs .= '--x-includes=/usr/X11/include '
          . '--x-libraries=/usr/X11/lib --disable-shared ';
        $Settings::ConfigureEnvArgs = 'CC="cc -DQNX" CXX="cc -DQNX"';
        $Settings::Compiler = 'cc';
        $Settings::mail = '/usr/bin/sendmail';
    }
    
    if ($Settings::OS eq 'SunOS') {
        if ($Settings::OSVerMajor eq '4') {
            $ENV{PATH} = "/usr/gnu/bin:/usr/local/sun4/bin:/usr/bin:$ENV{PATH}";
            $ENV{LD_LIBRARY_PATH} = "/home/motif/usr/lib:$ENV{LD_LIBRARY_PATH}";
            $Settings::ConfigureArgs .= '--x-includes=/home/motif/usr/include/X11 '
              . '--x-libraries=/home/motif/usr/lib';
            $Settings::ConfigureEnvArgs = 'CC="egcc -DSUNOS4" CXX="eg++ -DSUNOS4"';
            $Settings::Compiler = 'egcc';
        } else {
            $ENV{PATH} = '/usr/ccs/bin:' . $ENV{PATH};
        }
        if ($Settings::CPU eq 'i86pc') {
            $ENV{PATH} = '/opt/gnu/bin:' . $ENV{PATH};
            $ENV{LD_LIBRARY_PATH} .= ':/opt/gnu/lib';
            $Settings::ConfigureEnvArgs = 'CC=egcc CXX=eg++';
            $Settings::Compiler = 'egcc';
            
            # Possible NSPR bug... If USE_PTHREADS is defined, then
            #   _PR_HAVE_ATOMIC_CAS gets defined (erroneously?) and
            #   libnspr21 does not work.
            $Settings::NSPRArgs .= 'CLASSIC_NSPR=1 NS_USE_GCC=1 NS_USE_NATIVE=';
        } else {
            # This is utterly lame....
            if ($ENV{HOST} eq 'fugu') {
                $ENV{PATH} = "/tools/ns/workshop/bin:/usrlocal/bin:$ENV{PATH}";
                $ENV{LD_LIBRARY_PATH} = '/tools/ns/workshop/lib:/usrlocal/lib:'
                      . $ENV{LD_LIBRARY_PATH};
                $Settings::ConfigureEnvArgs = 'CC=cc CXX=CC';
                my $comptmp   = `cc -V 2>&1 | head -1`;
                chomp($comptmp);
                $Settings::Compiler = "cc/CC \($comptmp\)";
                $Settings::NSPRArgs .= 'NS_USE_NATIVE=1';
            } else {
                $Settings::NSPRArgs .= 'NS_USE_GCC=1 NS_USE_NATIVE=';
            }
            if ($Settings::OSVerMajor eq '5') {
                $Settings::NSPRArgs .= ' USE_PTHREADS=1';
            }
        }
    }
    #print "Path after: $ENV{PATH}\n";
}

sub print_log {
    my ($text) = @_;
    print LOG $text;
    print $text;
}

sub run_shell_command {
    my ($shell_command) = @_;
    local $_;

    my $status = 0;
    chomp($shell_command);
    print_log "$shell_command\n";
    open CMD, "$shell_command 2>&1|" or die "open: $!";
    print_log $_ while <CMD>;
    close CMD or $status = 1;
    return $status;
}

sub adjust_start_time {
    # Allows the start time to match up with the update times of a mirror.
    my ($start_time) = @_;

    # Since we are not pulling for cvs-mirror anymore, just round times
    # to 1 minute intervals to make them nice and even.
    my $cycle = 1 * 60;    # Updates every 1 minutes.
    my $begin = 0 * 60;    # Starts 0 minutes after the hour.
    my $lag = 0 * 60;      # Takes 0 minute to update.
    return int(($start_time - $begin - $lag) / $cycle) * $cycle + $begin;
}


sub mail_build_started_message {
    my ($start_time) = @_;
    
    open LOG, "|$Settings::mail $Settings::Tinderbox_server";
    
    PrintUsage() if $Settings::BuildTree =~ /^\s+$/i;

    print_log "\n";
    print_log "tinderbox: tree: $Settings::BuildTree\n";
    print_log "tinderbox: builddate: $start_time\n";
    print_log "tinderbox: status: building\n";
    print_log "tinderbox: build: $Settings::BuildName\n";
    print_log "tinderbox: errorparser: unix\n";
    print_log "tinderbox: buildfamily: unix\n";
    print_log "tinderbox: version: $::Version\n";
    print_log "tinderbox: END\n";
    print_log "\n";
    
    close LOG;
}

sub mail_build_finished_message {
    my ($start_time, $build_status, $logfile) = @_;

    # Rewrite LOG to OUTLOG, shortening lines.
    open OUTLOG, ">$logfile.last" or die "Unable to open logfile, $logfile: $!";
        
    # Put the status at the top of the log, so the server will not
    # have to search through the entire log to find it.
    print OUTLOG "tinderbox: tree: $Settings::BuildTree\n";
    print OUTLOG "tinderbox: builddate: $start_time\n";
    print OUTLOG "tinderbox: status: $build_status\n";
    print OUTLOG "tinderbox: build: $Settings::BuildName\n";
    print OUTLOG "tinderbox: errorparser: unix\n";
    print OUTLOG "tinderbox: buildfamily: unix\n";
    print OUTLOG "tinderbox: version: $::Version\n";
    print OUTLOG "tinderbox: utilsversion: $::UtilsVersion\n";
    print OUTLOG "tinderbox: END\n";
    
    # Make sendmail happy.
    # Split lines longer than 1000 charaters into 1000 character lines.
    # If any line is a dot on a line by itself, replace it with a blank
    # line. This prevents cases where a <cr>.<cr> occurs in the log file. 
    # Sendmail interprets that as the end of the mail, and truncates the
    # log before it gets to Tinderbox.  (terry weismann, chris yeh)
    
    open LOG, "$logfile" or die "Couldn't open logfile, $logfile: $!";
    while (<LOG>) {
        my $length = length($_);
	my $offset;
        for ($offset = 0; $offset < $length ; $offset += 1000) {
            my $chars_left = $length - $offset;
            my $output_length = $chars_left < 1000 ? $chars_left : 1000;
            my $output = substr $_, $offset, $output_length;
            $output =~ s/^\.$//g;
            $output =~ s/\n//g;
            print OUTLOG "$output\n";
        }
    }
    close OUTLOG;
    close LOG;
    unlink($logfile);
    
    if ($Settings::ReportStatus and $Settings::ReportFinalStatus) {
        system "$Settings::mail $Settings::Tinderbox_server "
              ." < $logfile.last";
    } 
}

sub BuildIt {
    # $Settings::DirName is set in buildl-seamonkey-utils.pl
    mkdir $Settings::DirName, 0777;
    chdir $Settings::DirName or die "Couldn't enter $Settings::DirName";
    
    my $build_dir = Cwd::getcwd();

    my $binary_basename = "$Settings::BinaryName";
    my $binary_dir = "$build_dir/$Settings::Topsrcdir/${Settings::ObjDir}/dist/bin";
    my $full_binary_name = "$binary_dir/$binary_basename";
	my $embed_dir = "$build_dir/$Settings::Topsrcdir/${Settings::ObjDir}/dist/Embed";
    my $full_embed_binary_name = "$embed_dir/gtkEmbed";
    my $exit_early = 0;
    my $start_time = 0;

    # Bypass profile at startup.
    $ENV{MOZ_BYPASS_PROFILE_AT_STARTUP} = 1;
    
	# Set up tag stuff.
    # Only one tag per file, so -r will override any -D settings.
	$Settings::CVSCO .= " -r $Settings::BuildTag"
      unless not defined($Settings::BuildTag) or $Settings::BuildTag eq '';

    print "Starting dir is : $build_dir\n";
    
    while (not $exit_early) {
        # $BuildSleep is the minimum amount of time a build is allowed to take.
        # It prevents sending too many messages to the tinderbox server when
        # something is broken.
        my $sleep_time = ($Settings::BuildSleep * 60) - (time - $start_time);
        if (not $Settings::TestOnly and $sleep_time > 0) {
            print "\n\nSleeping $sleep_time seconds ...\n";
            sleep $sleep_time;
        }
        $start_time = time();
        
        my $cvsco = '';
        if ($Settings::UseTimeStamp) {
            $start_time = adjust_start_time($start_time);
            my $time_str = POSIX::strftime("%m/%d/%Y %H:%M", localtime($start_time));
            $ENV{MOZ_CO_DATE} = "$time_str";
            $cvsco = "$Settings::CVSCO -D '$time_str'";
        } else {
            $cvsco = "$Settings::CVSCO -A";
        }
        
        mail_build_started_message($start_time) if $Settings::ReportStatus;
        
        chdir $build_dir;
        my $logfile = "$Settings::DirName.log";
        print "Opening $logfile\n";
        open LOG, ">$logfile"
          or die "Cannot open logfile, $logfile: $?\n";
        print_log "current dir is -- " . $ENV{HOST} . ":$build_dir\n";
        print_log "Build Administrator is $Settings::BuildAdministrator\n";
        
        PrintEnv();
        
		# Make sure we have client.mk.
        unless (-e "$TreeSpecific::name/client.mk") {
            run_shell_command "$Settings::CVS $cvsco $TreeSpecific::name/client.mk";
        }
		
        chdir $Settings::Topsrcdir or die "chdir $Settings::Topsrcdir: $!\n";

        # Build it
        my $build_status = 'none';
        unless ($Settings::TestOnly) { # Do not build if testing smoke tests.
            DeleteBinary($full_binary_name);

            my $make = "$Settings::Make -f client.mk $Settings::MakeOverrides CONFIGURE_ENV_ARGS='$Settings::ConfigureEnvArgs'";
            my $targets = $TreeSpecific::checkout_target;
            $targets = $TreeSpecific::checkout_clobber_target unless $Settings::BuildDepend;
	    mkdir $Settings::ObjDir, 0777 if ($Settings::ObjDir && ! -e $Settings::ObjDir);

            my $status = run_shell_command "$make $targets";
            if ($status != 0) {
              $build_status = 'busted';
            } elsif (not BinaryExists($full_binary_name)) {
              print_log "Error: binary not found: $binary_basename\n";
              $build_status = 'busted';
            }
        }
        
		# Build gecko.
        if ($build_status ne 'busted' and BinaryExists($full_binary_name)) {
		  print_log "$binary_basename binary exists, building now.\n";

		  my $tmpEmbedConfigDir = "$build_dir/$Settings::Topsrcdir/embedding/config";
		  chdir $tmpEmbedConfigDir or die "chdir $Settings::Topsrcdir: $!\n";

          my $statusEmbed = run_shell_command "gmake";
            if ($statusEmbed != 0) {
              $build_status = 'busted';
            } elsif (not BinaryExists($full_embed_binary_name)) {
              print_log "Error: binary not found: gtkEmbed\n";
              $build_status = 'busted';
            }		  
		}

        # Gecko tests, if any, go here.
        if ($build_status ne 'busted' and BinaryExists($full_embed_binary_name)) {
            print_log "$binary_basename binary exists, build successful.\n";
            if ($Settings::RunTest) {
                $build_status = run_tests($full_binary_name, $build_dir);
            } else {
                print_log "Skipping tests.\n";
                $build_status = 'success';
            }
        }

        close LOG;
        chdir $build_dir;
        
        mail_build_finished_message($start_time, $build_status, $logfile)
          if $Settings::ReportStatus;

        $exit_early++ if $Settings::TestOnly and $build_status ne 'success';
        $exit_early++ if $Settings::BuildOnce;
    }
}

sub run_tests {
    my ($binary, $build_dir) = @_;
    my $binary_basename = File::Basename::basename($binary);
    my $binary_dir =  File::Basename::dirname($binary);
    my $test_result = 'success';

    # The prefs file is used to check for a profile.
    # The mailnews test also adds a couple preferences to it.
    my $pref_file = "$build_dir/.mozilla/$Settings::MozProfileName/prefs.js";

    # Mozilla now create the "default" profile if none exists. -slamm 5-8-00
    #unless (-f $pref_file) {
    #  print_log "Prefs file not found: $pref_file\n";
    #  print_log "Creating profile...\n";
    # $test_result = CreateProfile($build_dir, $binary, $pref_file, 45);
    #}

    # Mozilla alive test
    #
    # Note: Bloat & MailNews tests depend this on working.
    # Only disable this test if you know it passes and are
    # debugging another part of the test sequence.  -mcafee
    #
    if ($Settings::AliveTest and $test_result eq 'success') {
        print_log "Running AliveTest ...\n";
        $test_result = AliveTest($build_dir, $binary, 45);
    }

    # Viewer alive test
    if ($Settings::ViewerTest and $test_result eq 'success') {
        print_log "Running ViewerTest ...\n";
        $test_result = AliveTest($build_dir, "$binary_dir/viewer", 45);
    }
    
    # Bloat test
    if ($Settings::BloatStats or $Settings::BloatTest
        and $test_result eq 'success') {
        print_log "Running BloatTest ...\n";
        $test_result = BloatTest($binary, $build_dir, $Settings::BloatTestTimeout);
    }
    
    # MailNews test needs this preference set:
    #   user_pref("signed.applets.codebase_principal_support",true);
    # First run gives two dialogs; they set this preference:
    #   user_pref("security.principal.X0","[Codebase http://www.mozilla.org/quality/mailnews/popTest.html] UniversalBrowserRead=4 UniversalXPConnect=4");
    #
    # Only do pop3 test now.
    #
    if ($Settings::MailNewsTest and $test_result eq 'success') {
        print_log "Running MailNewsTest ...\n";

		my $mail_url = "http://www.mozilla.org/quality/mailnews/popTest.html";

        my $cmd = "$binary_basename $mail_url";

        # Stuff prefs in here.
        if (system("grep -s signed.applets.codebase_principal_support $pref_file > /dev/null")) {
          open PREFS, ">>$pref_file" or die "can't open $pref_file ($?)\n";
          print PREFS "user_pref(\"signed.applets.codebase_principal_support\", true);\n";
          print PREFS "user_pref(\"security.principal.X0\", \"[Codebase $mail_url] UniversalBrowserRead=4 UniversalXPConnect=4\");";
          close PREFS;
        }

        $test_result = FileBasedTest("MailNewsTest", $build_dir, $binary_dir, 
                                     $cmd,  90, 
                                     "POP MAILNEWS TEST: Passed", 1, 
                                     1);  # Timeout is Ok.
    }
    
    # Editor test
    if (($Settings::EditorTest or $Settings::DomToTextConversionTest)
       and $test_result eq 'success') {
        print_log "Running  DomToTextConversionTest ...\n";
        $test_result =
          FileBasedTest("DomToTextConversionTest", $build_dir, $binary_dir,
                        "perl TestOutSinks.pl", $Settings::DomTestTimeout,
                        "FAILED", 0,
                        0);  # Timeout means failure.
    }
    return $test_result;
}

sub BinaryExists {
    my ($binary) = @_;
    my ($binary_basename) = File::Basename::basename($binary);

    if (not -e $binary) {
        print_log "$binary does not exist.\n";
        0;
    } elsif (not -s _) {
        print_log "$binary is zero-size.\n";
        0;
    } elsif (not -x _) {
        print_log "$binary is not executable.\n";
        0;
    } else {
        print_log "$binary_basename exists, is nonzero, and executable.\n";  
        1;
    }
}

sub DeleteBinary {
    my ($binary) = @_;
    my ($binary_basename) = File::Basename::basename($binary);

    if (BinaryExists($binary)) {
      print_log "Deleting binary: $binary_basename\n";
      print_log "unlinking $binary\n";
      unlink $binary or print_log "Error: Unlinking $binary failed\n";
    } else {
        print_log "No binary detected; none deleted.\n";
    }
}

sub PrintEnv {
    local $_;

    my $key;
    foreach $key (sort keys %ENV) {
        print_log "$key=$ENV{$key}\n";
    }
    if (defined $ENV{MOZCONFIG} and -e $ENV{MOZCONFIG}) {
        print_log "-->mozconfig<----------------------------------------\n";
        open CONFIG, "$ENV{MOZCONFIG}";
        print_log $_ while <CONFIG>;
        close CONFIG;
        print_log "-->end mozconfig<----------------------------------------\n";
    }
    if ($Settings::Compiler ne '') {
        print_log "===============================\n";
        if ($Settings::Compiler eq 'gcc' or $Settings::Compiler eq 'egcc') {
            my $comptmp = `$Settings::Compiler --version`;
            chomp($comptmp);
            print_log "Compiler is -- $Settings::Compiler ($comptmp)\n";
        } else {
            print_log "Compiler is -- $Settings::Compiler\n";
        }
        print_log "===============================\n";
    }
}

# Parse a file for $token, given a file handle.
sub file_has_token {
    my ($filename, $token) = @_;
    local $_;
    my $has_token = 0;
    open TESTLOG, "<$filename" or die "Cannot open file, $filename: $!";
    while (<TESTLOG>) {
        if (/$token/) {
            $has_token = 1;
            last;
        }
    }
    close TESTLOG;
    return $has_token;
}

sub kill_process {
    my ($target_pid) = @_;
    my $start_time = time;

    # Try to kill and wait 10 seconds, then try a kill -9
    my $sig;
    for $sig ('TERM', 'KILL') {
        kill $sig => $target_pid;
        my $interval_start = time;
        while (time - $interval_start < 10) {
            my $pid = waitpid($target_pid, POSIX::WNOHANG());
            if (($pid == $target_pid and POSIX::WIFEXITED($?)) or $pid == -1) {
                my $secs = time - $start_time;
                $secs = $secs == 1 ? '1 second' : "$secs seconds";
                print_log "Process killed. Took $secs to die.\n";
                return;
            }
            sleep 1;
        }
    }
    die "Unable to kill process: $target_pid";
}

BEGIN {
    my %sig_num = ();
    my @sig_name = ();

    sub signal_name {
        # Find the name of a signal number
        my ($number) = @_;
        
        unless (@sig_name) {
            unless($Config::Config{sig_name} && $Config::Config{sig_num}) {
                die "No sigs?";
            } else {
                my @names = split ' ', $Config::Config{sig_name};
                @sig_num{@names} = split ' ', $Config::Config{sig_num};
                foreach (@names) {
                    $sig_name[$sig_num{$_}] ||= $_;
                }
            }
        }
        return $sig_name[$number];
    }
}

sub fork_and_log {
    # Fork a sub process and log the output.
    my ($home, $dir, $cmd, $logfile) = @_;

    my $pid = fork; # Fork off a child process.
    
    unless ($pid) { # child
        $ENV{HOME} = $home;
        chdir $dir;
        open STDOUT, ">$logfile";
        open STDERR, ">&STDOUT";
        select STDOUT; $| = 1;  # make STDOUT unbuffered
        select STDERR; $| = 1;  # make STDERR unbuffered
        exec $cmd;
        die "Could not exec()";
    }
    return $pid;
}

sub wait_for_pid {
    # Wait for a process to exit or kill it if it takes too long.
    my ($pid, $timeout_secs) = @_;
    my ($exit_value, $signal_num, $dumped_core, $timed_out) = (0,0,0,0);
    my $sig_name;

    $SIG{ALRM} = sub { die "timeout" };
    eval {
        alarm $timeout_secs;
        while (1) {
            my $wait_pid = waitpid($pid, POSIX::WNOHANG());
            last if ($wait_pid == $pid and POSIX::WIFEXITED($?)) or $wait_pid == -1;
            sleep 1;
        }
        $exit_value = $? >> 8;
        $signal_num = $? >> 127;
        $dumped_core = $? & 128;
        alarm 0; # Clear the alarm
    };
    if ($@) {
        if ($@ =~ /timeout/) {
            kill_process($pid);
            $timed_out = 1;
        } else { # Died for some other reason.
            alarm(0);
            die; # Propagate the error up.
        }
    }
    $sig_name = $signal_num ? signal_name($signal_num) : '';

    return { timed_out=>$timed_out, 
             exit_value=>$exit_value,
             sig_name=>$sig_name,
             dumped_core=>$dumped_core };
}

sub run_test {
    my ($home_dir, $binary_dir, $binary, $logfile, $timeout_secs) = @_;
    my $now = localtime();
    
    print_log "Begin: $now\n";
    print_log "$binary\n";

    my $pid = fork_and_log($home_dir, $binary_dir, $binary, $logfile);
    my $result = wait_for_pid($pid, $timeout_secs);

    $now = localtime();
    print_log "End:   $now\n";

    return $result;
}    

sub print_test_errors {
    my ($result, $name) = @_;

    if (not $result->{timed_out} and $result->{exit_value} != 0) {
        if ($result->{sig_name} ne '') {
            print_log "Error: $name: received SIG$result->{sig_name}\n";
        }
        print_log "Error: $name: exited with status $result->{exit_value}\n";
        if ($result->{dumped_core}) {
            print_log "Error: $name: dumped core.\n";
        }
    }
}

sub print_logfile {
    my ($logfile, $test_name) = @_;
    print_log "----------- Output from $test_name ------------- \n";
    open READRUNLOG, "$logfile";
    print_log "  $_" while <READRUNLOG>;
    close READRUNLOG;
    print_log "----------- End Output from $test_name --------- \n";
}


sub CreateProfile {
    my ($build_dir, $binary, $pref_file, $timeout_secs) = @_;
    my $binary_dir = File::Basename::dirname($binary);
    my $binary_log = "$build_dir/profile.log";
    local $_;

    my $cmd = "$binary -CreateProfile $Settings::MozProfileName";
    my $result = run_test($build_dir, $binary_dir, $cmd,
                          $binary_log, $timeout_secs);

    print_logfile($binary_log, "Create Profile");
    
    if ($result->{timed_out}) {
	    # timeout = success.
        print_log "Success: profile was created, $binary started and stayed up.\n";
        return 'success';
    } elsif ($result->{exit_value} != 0) {
      my $binary_basename = File::Basename::basename($binary);
        print_test_errors($result, $binary_basename);
        return 'testfailed';
    } else {
        if (-f $pref_file) {
            return 'success';
        } else {
            return "Error: no prefs after creating profile: $pref_file\n";
            return 'testfailed'
        }
    }
}

# Start up Mozilla, test passes if Mozilla is still alive
# after $timeout_secs (seconds).
#
sub AliveTest {
    my ($build_dir, $binary, $timeout_secs) = @_;
    my $binary_basename = File::Basename::basename($binary);
    my $binary_dir = File::Basename::dirname($binary);
    my $binary_log = "$build_dir/runlog";
    local $_;

    my $result = run_test($build_dir, $binary_dir, $binary_basename,
                          $binary_log, $timeout_secs);

    print_logfile($binary_log, "$binary_basename alive test");
    
    if ($result->{timed_out}) {
        print_log "$binary_basename successfully stayed up"
                  ." for $timeout_secs seconds.\n";
        return 'success';
    } else {
        print_test_errors($result, $binary_basename);
        return 'testfailed';
    }
}



# Run a generic test that writes output to stdout, save that output to a
# file, parse the file looking for failure token and report status based
# on that.  A hack, but should be useful for many tests.
#
# test_name = Name of test we're gonna run, in dist/bin.
# testExecString = How to run the test
# testTimeoutSec = Timeout for hung tests, minimum test time.
# statusToken = What string to look for in test output to 
#     determine test status.
# statusTokenMeansPass = Default use of status token is to look for
#     failure string.  If this is set to 1, then invert logic to look for
#     success string.
#
# timeout_is_ok = Don't report test failure if test times out.
#
# Note: I tried to merge this function with AliveTest(),
#       the process flow control got too confusing :(  -mcafee
#
sub FileBasedTest {
    my ($test_name, $build_dir, $binary_dir, $test_command, $timeout_secs, 
        $status_token, $status_token_means_pass, $timeout_is_ok) = @_;
    local $_;

    # Assume the app is the first argument in the execString.
    my ($binary_basename) = (split /\s+/, $test_command)[0];
    my $binary_log = "$build_dir/$test_name.log";

    my $result = run_test($build_dir, $binary_dir, $test_command,
                          $binary_log, $timeout_secs);

    print_logfile($binary_log, $test_name);
    
    if (($result->{timed_out}) and (!$timeout_is_ok)) {
        print_log "Error: $test_name timed out after $timeout_secs seconds.\n";
        return 'testfailed';
    } elsif ($result->{exit_value} != 0) {
        print_test_errors($result, $test_name);
        return 'testfailed';
    } else {
        print_log "$test_name exited normally\n";
    }

    my $found_token = file_has_token($binary_log, $status_token);
    if ($found_token) {
        print_log "Found status token in log file: $status_token\n";
    } else {
        print_log "Status token, $status_token, not found\n";
    }
    
    if (($status_token_means_pass and $found_token) or
        (not $status_token_means_pass and not $found_token)) {
        return 'success';
    } else {
        print_log "Error: $test_name has failed.\n";
        return 'testfailed';
    }
} # FileBasedTest

sub BloatTest {
    my ($binary, $build_dir, $timeout_secs) = @_;
    my $binary_basename = File::Basename::basename($binary);
    my $binary_dir = File::Basename::dirname($binary);
    my $binary_log = "$build_dir/bloat-cur.log";
    my $old_binary_log = "$build_dir/bloat-prev.log";
    local $_;

    rename($binary_log, $old_binary_log);
    
    unless (-e "$binary_dir/bloaturls.txt") {
        print_log "Error: bloaturls.txt does not exist.\n";
        return 'testfailed';
    }

    $ENV{XPCOM_MEM_BLOAT_LOG} = 1; # Turn on ref counting to track leaks.
    my $cmd = "$binary_basename -f bloaturls.txt";
    my $result = run_test($build_dir, $binary_dir, $cmd, $binary_log,
                          $timeout_secs);
    delete $ENV{XPCOM_MEM_BLOAT_LOG};

    print_logfile($binary_log, "bloat test");
    
    if ($result->{timed_out}) {
      print_log "Error: bloat test timed out after"
        ." $timeout_secs seconds.\n";
      return 'testfailed';
    } elsif ($result->{exit_value}) {
      print_test_errors($result, $binary_basename);
      return 'testfailed';
    }

    print_log "<a href=#bloat>\n######################## BLOAT STATISTICS\n";
    open DIFF, "$build_dir/../bloatdiff.pl $build_dir/bloat-prev.log $binary_log|"
      or die "Unable to run bloatdiff.pl";
    print_log $_ while <DIFF>;
    close DIFF;
    print_log "######################## END BLOAT STATISTICS\n</a>\n";
    
    return 'success';
}


# Need to end with a true value, (since we're using "require").
1;