/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* vim: set ts=8 sts=2 et sw=2 tw=80: */
/* This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/. */

#ifndef MOZILLA_GFX_TYPES_H_
#define MOZILLA_GFX_TYPES_H_

#include "mozilla/EndianUtils.h"
#include "mozilla/MacroArgs.h"  // for MOZ_CONCAT

#include <stddef.h>
#include <stdint.h>

namespace mozilla {
namespace gfx {

typedef float Float;
typedef double Double;

enum class SurfaceType : int8_t {
  DATA,                   /* Data surface - bitmap in memory */
  D2D1_BITMAP,            /* Surface wrapping a ID2D1Bitmap */
  D2D1_DRAWTARGET,        /* Surface made from a D2D draw target */
  CAIRO,                  /* Surface wrapping a cairo surface */
  CAIRO_IMAGE,            /* Data surface wrapping a cairo image surface */
  COREGRAPHICS_IMAGE,     /* Surface wrapping a CoreGraphics Image */
  COREGRAPHICS_CGCONTEXT, /* Surface wrapping a CG context */
  SKIA,                   /* Surface wrapping a Skia bitmap */
  DUAL_DT,                /* Snapshot of a dual drawtarget */
  D2D1_1_IMAGE,           /* A D2D 1.1 ID2D1Image SourceSurface */
  RECORDING,              /* Surface used for recording */
  TILED,                  /* Surface from a tiled DrawTarget */
  DATA_SHARED,            /* Data surface using shared memory */
  CAPTURE,                /* Data from a DrawTargetCapture */
  DATA_RECYCLING_SHARED   /* Data surface using shared memory */
};

enum class SurfaceFormat : int8_t {
  // The following values are named to reflect layout of colors in memory, from
  // lowest byte to highest byte. The 32-bit value layout depends on machine
  // endianness.
  //               in-memory            32-bit LE value   32-bit BE value
  B8G8R8A8,  // [BB, GG, RR, AA]     0xAARRGGBB        0xBBGGRRAA
  B8G8R8X8,  // [BB, GG, RR, 00]     0x00RRGGBB        0xBBGGRR00
  R8G8B8A8,  // [RR, GG, BB, AA]     0xAABBGGRR        0xRRGGBBAA
  R8G8B8X8,  // [RR, GG, BB, 00]     0x00BBGGRR        0xRRGGBB00
  A8R8G8B8,  // [AA, RR, GG, BB]     0xBBGGRRAA        0xAARRGGBB
  X8R8G8B8,  // [00, RR, GG, BB]     0xBBGGRR00        0x00RRGGBB

  R8G8B8,
  B8G8R8,

  // The _UINT16 suffix here indicates that the name reflects the layout when
  // viewed as a uint16_t value. In memory these values are stored using native
  // endianness.
  R5G6B5_UINT16,  // 0bRRRRRGGGGGGBBBBB

  // This one is a single-byte, so endianness isn't an issue.
  A8,
  A16,

  R8G8,

  // These ones are their own special cases.
  YUV,
  NV12,  // YUV 4:2:0 image with a plane of 8 bit Y samples followed by
         // an interleaved U/V plane containing 8 bit 2x2 subsampled
         // colour difference samples.
  P016,  // Similar to NV12, but with 16 bits plane values
  P010,  // Identical to P016 but the 6 least significant bits are 0.
         // With DXGI in theory entirely compatible, however practice has
         // shown that it's not the case.
  YUV422,
  HSV,
  Lab,
  Depth,

  // This represents the unknown format.
  UNKNOWN,

// The following values are endian-independent synonyms. The _UINT32 suffix
// indicates that the name reflects the layout when viewed as a uint32_t
// value.
#if MOZ_LITTLE_ENDIAN
  A8R8G8B8_UINT32 = B8G8R8A8,  // 0xAARRGGBB
  X8R8G8B8_UINT32 = B8G8R8X8   // 0x00RRGGBB
#elif MOZ_BIG_ENDIAN
  A8R8G8B8_UINT32 = A8R8G8B8,  // 0xAARRGGBB
  X8R8G8B8_UINT32 = X8R8G8B8   // 0x00RRGGBB
#else
#error "bad endianness"
#endif
};

static inline int BytesPerPixel(SurfaceFormat aFormat) {
  switch (aFormat) {
    case SurfaceFormat::A8:
      return 1;
    case SurfaceFormat::R5G6B5_UINT16:
    case SurfaceFormat::A16:
      return 2;
    case SurfaceFormat::R8G8B8:
    case SurfaceFormat::B8G8R8:
      return 3;
    case SurfaceFormat::HSV:
    case SurfaceFormat::Lab:
      return 3 * sizeof(float);
    case SurfaceFormat::Depth:
      return sizeof(uint16_t);
    default:
      return 4;
  }
}

inline bool IsOpaque(SurfaceFormat aFormat) {
  switch (aFormat) {
    case SurfaceFormat::B8G8R8X8:
    case SurfaceFormat::R8G8B8X8:
    case SurfaceFormat::X8R8G8B8:
    case SurfaceFormat::R5G6B5_UINT16:
    case SurfaceFormat::R8G8B8:
    case SurfaceFormat::B8G8R8:
    case SurfaceFormat::R8G8:
    case SurfaceFormat::HSV:
    case SurfaceFormat::Lab:
    case SurfaceFormat::Depth:
    case SurfaceFormat::YUV:
    case SurfaceFormat::NV12:
    case SurfaceFormat::P010:
    case SurfaceFormat::P016:
    case SurfaceFormat::YUV422:
      return true;
    default:
      return false;
  }
}

enum class ColorDepth : uint8_t {
  COLOR_8,
  COLOR_10,
  COLOR_12,
  COLOR_16,
  UNKNOWN
};

static inline SurfaceFormat SurfaceFormatForColorDepth(ColorDepth aColorDepth) {
  SurfaceFormat format = SurfaceFormat::A8;
  switch (aColorDepth) {
    case ColorDepth::COLOR_8:
      break;
    case ColorDepth::COLOR_10:
    case ColorDepth::COLOR_12:
    case ColorDepth::COLOR_16:
      format = SurfaceFormat::A16;
      break;
    case ColorDepth::UNKNOWN:
      MOZ_ASSERT_UNREACHABLE("invalid color depth value");
  }
  return format;
}

static inline uint32_t BitDepthForColorDepth(ColorDepth aColorDepth) {
  uint32_t depth = 8;
  switch (aColorDepth) {
    case ColorDepth::COLOR_8:
      break;
    case ColorDepth::COLOR_10:
      depth = 10;
      break;
    case ColorDepth::COLOR_12:
      depth = 12;
      break;
    case ColorDepth::COLOR_16:
      depth = 16;
      break;
    case ColorDepth::UNKNOWN:
      MOZ_ASSERT_UNREACHABLE("invalid color depth value");
  }
  return depth;
}

static inline ColorDepth ColorDepthForBitDepth(uint8_t aBitDepth) {
  ColorDepth depth = ColorDepth::COLOR_8;
  switch (aBitDepth) {
    case 8:
      break;
    case 10:
      depth = ColorDepth::COLOR_10;
      break;
    case 12:
      depth = ColorDepth::COLOR_12;
      break;
    case 16:
      depth = ColorDepth::COLOR_16;
      break;
    default:
      MOZ_ASSERT_UNREACHABLE("invalid color depth value");
  }
  return depth;
}

// 10 and 12 bits color depth image are using 16 bits integers for storage
// As such we need to rescale the value from 10 or 12 bits to 16.
static inline uint32_t RescalingFactorForColorDepth(ColorDepth aColorDepth) {
  uint32_t factor = 1;
  switch (aColorDepth) {
    case ColorDepth::COLOR_8:
      break;
    case ColorDepth::COLOR_10:
      factor = 64;
      break;
    case ColorDepth::COLOR_12:
      factor = 16;
      break;
    case ColorDepth::COLOR_16:
      break;
    case ColorDepth::UNKNOWN:
      MOZ_ASSERT_UNREACHABLE("invalid color depth value");
  }
  return factor;
}

enum class FilterType : int8_t {
  BLEND = 0,
  TRANSFORM,
  MORPHOLOGY,
  COLOR_MATRIX,
  FLOOD,
  TILE,
  TABLE_TRANSFER,
  DISCRETE_TRANSFER,
  LINEAR_TRANSFER,
  GAMMA_TRANSFER,
  CONVOLVE_MATRIX,
  DISPLACEMENT_MAP,
  TURBULENCE,
  ARITHMETIC_COMBINE,
  COMPOSITE,
  DIRECTIONAL_BLUR,
  GAUSSIAN_BLUR,
  POINT_DIFFUSE,
  POINT_SPECULAR,
  SPOT_DIFFUSE,
  SPOT_SPECULAR,
  DISTANT_DIFFUSE,
  DISTANT_SPECULAR,
  CROP,
  PREMULTIPLY,
  UNPREMULTIPLY,
  OPACITY
};

enum class DrawTargetType : int8_t {
  SOFTWARE_RASTER = 0,
  HARDWARE_RASTER,
  VECTOR
};

enum class BackendType : int8_t {
  NONE = 0,
  DIRECT2D,  // Used for version independent D2D objects.
  CAIRO,
  SKIA,
  RECORDING,
  DIRECT2D1_1,
  WEBRENDER_TEXT,

  // Add new entries above this line.
  BACKEND_LAST
};

enum class FontType : int8_t {
  DWRITE,
  GDI,
  MAC,
  FONTCONFIG,
  FREETYPE,
  UNKNOWN
};

enum class NativeSurfaceType : int8_t {
  D3D10_TEXTURE,
  CAIRO_CONTEXT,
  CGCONTEXT,
  CGCONTEXT_ACCELERATED,
  OPENGL_TEXTURE
};

enum class NativeFontType : int8_t {
  GDI_LOGFONT,
  FREETYPE_FACE,
  FONTCONFIG_PATTERN,
};

enum class FontStyle : int8_t { NORMAL, ITALIC, BOLD, BOLD_ITALIC };

enum class FontHinting : int8_t { NONE, LIGHT, NORMAL, FULL };

enum class CompositionOp : int8_t {
  OP_OVER,
  OP_ADD,
  OP_ATOP,
  OP_OUT,
  OP_IN,
  OP_SOURCE,
  OP_DEST_IN,
  OP_DEST_OUT,
  OP_DEST_OVER,
  OP_DEST_ATOP,
  OP_XOR,
  OP_MULTIPLY,
  OP_SCREEN,
  OP_OVERLAY,
  OP_DARKEN,
  OP_LIGHTEN,
  OP_COLOR_DODGE,
  OP_COLOR_BURN,
  OP_HARD_LIGHT,
  OP_SOFT_LIGHT,
  OP_DIFFERENCE,
  OP_EXCLUSION,
  OP_HUE,
  OP_SATURATION,
  OP_COLOR,
  OP_LUMINOSITY,
  OP_COUNT
};

enum class Axis : int8_t { X_AXIS, Y_AXIS, BOTH };

enum class ExtendMode : int8_t {
  CLAMP,     // Do not repeat
  REPEAT,    // Repeat in both axis
  REPEAT_X,  // Only X axis
  REPEAT_Y,  // Only Y axis
  REFLECT    // Mirror the image
};

enum class FillRule : int8_t { FILL_WINDING, FILL_EVEN_ODD };

enum class AntialiasMode : int8_t { NONE, GRAY, SUBPIXEL, DEFAULT };

// See https://en.wikipedia.org/wiki/Texture_filtering
enum class SamplingFilter : int8_t {
  GOOD,
  LINEAR,
  POINT,
  SENTINEL  // one past the last valid value
};

enum class PatternType : int8_t {
  COLOR,
  SURFACE,
  LINEAR_GRADIENT,
  RADIAL_GRADIENT
};

enum class JoinStyle : int8_t {
  BEVEL,
  ROUND,
  MITER,  //!< Mitered if within the miter limit, else, if the backed supports
          //!< it (D2D), the miter is clamped. If the backend does not support
          //!< miter clamping the behavior is as for MITER_OR_BEVEL.
  MITER_OR_BEVEL  //!< Mitered if within the miter limit, else beveled.
};

enum class CapStyle : int8_t { BUTT, ROUND, SQUARE };

enum class SamplingBounds : int8_t { UNBOUNDED, BOUNDED };

// Moz2d version for SVG mask types
enum class LuminanceType : int8_t {
  LUMINANCE,
  LINEARRGB,
};

/* Color is stored in non-premultiplied form */
struct Color {
 public:
  Color() : r(0.0f), g(0.0f), b(0.0f), a(0.0f) {}
  Color(Float aR, Float aG, Float aB, Float aA) : r(aR), g(aG), b(aB), a(aA) {}
  Color(Float aR, Float aG, Float aB) : r(aR), g(aG), b(aB), a(1.0f) {}

  static Color FromABGR(uint32_t aColor) {
    Color newColor(((aColor >> 0) & 0xff) * (1.0f / 255.0f),
                   ((aColor >> 8) & 0xff) * (1.0f / 255.0f),
                   ((aColor >> 16) & 0xff) * (1.0f / 255.0f),
                   ((aColor >> 24) & 0xff) * (1.0f / 255.0f));

    return newColor;
  }

  // The "Unusual" prefix is to avoid unintentionally using this function when
  // FromABGR(), which is much more common, is needed.
  static Color UnusualFromARGB(uint32_t aColor) {
    Color newColor(((aColor >> 16) & 0xff) * (1.0f / 255.0f),
                   ((aColor >> 8) & 0xff) * (1.0f / 255.0f),
                   ((aColor >> 0) & 0xff) * (1.0f / 255.0f),
                   ((aColor >> 24) & 0xff) * (1.0f / 255.0f));

    return newColor;
  }

  uint32_t ToABGR() const {
    return uint32_t(r * 255.0f) | uint32_t(g * 255.0f) << 8 |
           uint32_t(b * 255.0f) << 16 | uint32_t(a * 255.0f) << 24;
  }

  // The "Unusual" prefix is to avoid unintentionally using this function when
  // ToABGR(), which is much more common, is needed.
  uint32_t UnusualToARGB() const {
    return uint32_t(b * 255.0f) | uint32_t(g * 255.0f) << 8 |
           uint32_t(r * 255.0f) << 16 | uint32_t(a * 255.0f) << 24;
  }

  bool operator==(const Color& aColor) const {
    return r == aColor.r && g == aColor.g && b == aColor.b && a == aColor.a;
  }

  bool operator!=(const Color& aColor) const { return !(*this == aColor); }

  Float r, g, b, a;
};

struct GradientStop {
  bool operator<(const GradientStop& aOther) const {
    return offset < aOther.offset;
  }

  Float offset;
  Color color;
};

enum class JobStatus { Complete, Wait, Yield, Error };

}  // namespace gfx
}  // namespace mozilla

// XXX: temporary
typedef mozilla::gfx::SurfaceFormat gfxImageFormat;

#if defined(XP_WIN) && defined(MOZ_GFX)
#ifdef GFX2D_INTERNAL
#define GFX2D_API __declspec(dllexport)
#else
#define GFX2D_API __declspec(dllimport)
#endif
#else
#define GFX2D_API
#endif

namespace mozilla {

// Side constants for use in various places.
enum Side { eSideTop, eSideRight, eSideBottom, eSideLeft };

enum SideBits {
  eSideBitsNone = 0,
  eSideBitsTop = 1 << eSideTop,
  eSideBitsRight = 1 << eSideRight,
  eSideBitsBottom = 1 << eSideBottom,
  eSideBitsLeft = 1 << eSideLeft,
  eSideBitsTopBottom = eSideBitsTop | eSideBitsBottom,
  eSideBitsLeftRight = eSideBitsLeft | eSideBitsRight,
  eSideBitsAll = eSideBitsTopBottom | eSideBitsLeftRight
};

// Creates a for loop that walks over the four mozilla::Side values.
// We use an int32_t helper variable (instead of a Side) for our loop counter,
// to avoid triggering undefined behavior just before we exit the loop (at
// which point the counter is incremented beyond the largest valid Side value).
#define NS_FOR_CSS_SIDES(var_)                                               \
  int32_t MOZ_CONCAT(var_, __LINE__) = mozilla::eSideTop;                    \
  for (mozilla::Side var_;                                                   \
       MOZ_CONCAT(var_, __LINE__) <= mozilla::eSideLeft &&                   \
       (static_cast<void>(var_ = mozilla::Side(MOZ_CONCAT(var_, __LINE__))), \
        true);                                                               \
       ++MOZ_CONCAT(var_, __LINE__))

static inline Side& operator++(Side& side) {
  MOZ_ASSERT(side >= eSideTop && side <= eSideLeft, "Out of range side");
  side = Side(side + 1);
  return side;
}

enum Corner {
  // This order is important!
  eCornerTopLeft = 0,
  eCornerTopRight = 1,
  eCornerBottomRight = 2,
  eCornerBottomLeft = 3
};

// RectCornerRadii::radii depends on this value. It is not being added to
// Corner because we want to lift the responsibility to handle it in the
// switch-case.
constexpr int eCornerCount = 4;

// Creates a for loop that walks over the four mozilla::Corner values. This
// implementation uses the same technique as NS_FOR_CSS_SIDES.
#define NS_FOR_CSS_FULL_CORNERS(var_)                                          \
  int32_t MOZ_CONCAT(var_, __LINE__) = mozilla::eCornerTopLeft;                \
  for (mozilla::Corner var_;                                                   \
       MOZ_CONCAT(var_, __LINE__) <= mozilla::eCornerBottomLeft &&             \
       (static_cast<void>(var_ = mozilla::Corner(MOZ_CONCAT(var_, __LINE__))), \
        true);                                                                 \
       ++MOZ_CONCAT(var_, __LINE__))

static inline Corner operator++(Corner& aCorner) {
  MOZ_ASSERT(aCorner >= eCornerTopLeft && aCorner <= eCornerBottomLeft,
             "Out of range corner!");
  aCorner = Corner(aCorner + 1);
  return aCorner;
}

// Indices into "half corner" arrays (nsStyleCorners e.g.)
enum HalfCorner {
  // This order is important!
  eCornerTopLeftX = 0,
  eCornerTopLeftY = 1,
  eCornerTopRightX = 2,
  eCornerTopRightY = 3,
  eCornerBottomRightX = 4,
  eCornerBottomRightY = 5,
  eCornerBottomLeftX = 6,
  eCornerBottomLeftY = 7
};

// Creates a for loop that walks over the eight mozilla::HalfCorner values.
// This implementation uses the same technique as NS_FOR_CSS_SIDES.
#define NS_FOR_CSS_HALF_CORNERS(var_)                                \
  int32_t MOZ_CONCAT(var_, __LINE__) = mozilla::eCornerTopLeftX;     \
  for (mozilla::HalfCorner var_;                                     \
       MOZ_CONCAT(var_, __LINE__) <= mozilla::eCornerBottomLeftY &&  \
       (static_cast<void>(                                           \
            var_ = mozilla::HalfCorner(MOZ_CONCAT(var_, __LINE__))), \
        true);                                                       \
       ++MOZ_CONCAT(var_, __LINE__))

static inline HalfCorner operator++(HalfCorner& aHalfCorner) {
  MOZ_ASSERT(
      aHalfCorner >= eCornerTopLeftX && aHalfCorner <= eCornerBottomLeftY,
      "Out of range half corner!");
  aHalfCorner = HalfCorner(aHalfCorner + 1);
  return aHalfCorner;
}

// The result of these conversion functions are exhaustively checked in
// nsStyleCoord.cpp, which also serves as usage examples.

constexpr bool HalfCornerIsX(HalfCorner aHalfCorner) {
  return !(aHalfCorner % 2);
}

constexpr Corner HalfToFullCorner(HalfCorner aHalfCorner) {
  return Corner(aHalfCorner / 2);
}

constexpr HalfCorner FullToHalfCorner(Corner aCorner, bool aIsVertical) {
  return HalfCorner(aCorner * 2 + aIsVertical);
}

constexpr bool SideIsVertical(Side aSide) { return aSide % 2; }

// @param aIsSecond when true, return the clockwise second of the two
// corners associated with aSide. For example, with aSide = eSideBottom the
// result is eCornerBottomRight when aIsSecond is false, and
// eCornerBottomLeft when aIsSecond is true.
constexpr Corner SideToFullCorner(Side aSide, bool aIsSecond) {
  return Corner((aSide + aIsSecond) % 4);
}

// @param aIsSecond see SideToFullCorner.
// @param aIsParallel return the half-corner that is parallel with aSide
// when aIsParallel is true. For example with aSide=eSideTop, aIsSecond=true
// the result is eCornerTopRightX when aIsParallel is true, and
// eCornerTopRightY when aIsParallel is false (because "X" is parallel with
// eSideTop/eSideBottom, similarly "Y" is parallel with
// eSideLeft/eSideRight)
constexpr HalfCorner SideToHalfCorner(Side aSide, bool aIsSecond,
                                      bool aIsParallel) {
  return HalfCorner(((aSide + aIsSecond) * 2 + (aSide + !aIsParallel) % 2) % 8);
}

}  // namespace mozilla

#endif /* MOZILLA_GFX_TYPES_H_ */