#
# ***** BEGIN LICENSE BLOCK *****
# Version: MPL 1.1/GPL 2.0/LGPL 2.1
#
# The contents of this file are subject to the Mozilla Public License Version
# 1.1 (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
# http://www.mozilla.org/MPL/
#
# Software distributed under the License is distributed on an "AS IS" basis,
# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
# for the specific language governing rights and limitations under the
# License.
#
# The Original Code is mozilla.org code.
#
# The Initial Developer of the Original Code is
# Mozilla Foundation.
# Portions created by the Initial Developer are Copyright (C) 2008
# the Initial Developer. All Rights Reserved.
#
# Contributor(s):
#   Robert Sayre <sayrer@gmail.com>
#   Jeff Walden <jwalden+bmo@mit.edu>
#
# Alternatively, the contents of this file may be used under the terms of
# either the GNU General Public License Version 2 or later (the "GPL"), or
# the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
# in which case the provisions of the GPL or the LGPL are applicable instead
# of those above. If you wish to allow use of your version of this file only
# under the terms of either the GPL or the LGPL, and not to allow others to
# use your version of this file under the terms of the MPL, indicate your
# decision by deleting the provisions above and replace them with the notice
# and other provisions required by the GPL or the LGPL. If you do not delete
# the provisions above, a recipient may use your version of this file under
# the terms of any one of the MPL, the GPL or the LGPL.
#
# ***** END LICENSE BLOCK *****

from datetime import datetime
import itertools
import shutil
import os
import sys

"""
Runs the browser from a script, and provides useful utilities
for setting up the browser environment.
"""

# Since some tests require cross-domain support in Mochitest, across ports,
# domains, subdomains, etc. we use a proxy autoconfig hack to map a bunch of
# servers onto localhost:8888.  We have to grant them the same privileges as
# localhost:8888 here, since the browser only knows them as the URLs they're
# pretending to be.  We also have two servers which are set up but don't have
# privileges, for testing privilege functionality.
#
# These lists must be kept in sync with the following list:
#
# http://developer.mozilla.org/en/docs/Mochitest#How_do_I_test_issues_which_only_show_up_when_tests_are_run_across_domains.3F
#
servers = [
           "localhost:8888", # MUST be first -- see PAC pref-setting code
           "example.org:80",
           "test1.example.org:80",
           "test2.example.org:80",
           "sub1.test1.example.org:80",
           "sub1.test2.example.org:80",
           "sub2.test1.example.org:80",
           "sub2.test2.example.org:80",
           "example.org:8000",
           "test1.example.org:8000",
           "test2.example.org:8000",
           "sub1.test1.example.org:8000",
           "sub1.test2.example.org:8000",
           "sub2.test1.example.org:8000",
           "sub2.test2.example.org:8000",
           "example.com:80",
           "test1.example.com:80",
           "test2.example.com:80",
           "sub1.test1.example.com:80",
           "sub1.test2.example.com:80",
           "sub2.test1.example.com:80",
           "sub2.test2.example.com:80",
           "sectest1.example.org:80",
           "sub.sectest2.example.org:80",
           "sub1.xn--lt-uia.example.org:8000", # U+00E4 U+006C U+0074
           "sub2.xn--lt-uia.example.org:80",   # U+00E4 U+006C U+0074
           "xn--exmple-cua.test:80",
           "sub1.xn--exmple-cua.test:80",
           "xn--hxajbheg2az3al.xn--jxalpdlp:80", # Greek IDN for example.test
           "sub1.xn--hxajbheg2az3al.xn--jxalpdlp:80",
          ]

unprivilegedServers = [
                       "sectest2.example.org:80",
                       "sub.sectest1.example.org:80",
                      ]


# These are generated in mozilla/build/Makefile.in
#expand DIST_BIN = "./" + __XPC_BIN_PATH__
#expand IS_WIN32 = len("__WIN32__") != 0
#expand IS_MAC = __IS_MAC__ != 0
#ifdef IS_CYGWIN
#expand IS_CYGWIN = __IS_CYGWIN__ == 1
#else
IS_CYGWIN = False
#endif

UNIXISH = not IS_WIN32 and not IS_MAC

#expand DEFAULT_APP = "./" + __BROWSER_PATH__

#################
# SUBPROCESSING #
#################

class Process:
  """
  Represents a subprocess of this process.  We don't just directly use the
  subprocess module here because we want compatibility with Python 2.3 on
  non-Windows platforms.  :-(
  """

  def __init__(self, command, args, env):
    """
    Executes the given command, which must be an absolute path, with the given
    arguments in the given environment.
    """
    command = os.path.abspath(command)
    if IS_WIN32:
      import subprocess
      cmd = [command]
      cmd.extend(args)
      self._process = subprocess.Popen(cmd, env = env)
    else:
      import popen2
      cmd = []
      for (k, v) in env.iteritems():
        cmd.append(k + "='" + v + "' ")
      cmd.append("'" + command + "'")
      cmd.extend(map(lambda x: "'" + x + "'", args))
      cmd = " ".join(cmd)
      self._process = popen2.Popen4(cmd)
    self.pid = self._process.pid

  def wait(self):
    "Waits for this process to finish, then returns the process's status."
    if IS_WIN32:
      return self._process.wait()
    # popen2 is a bit harder to work with because we have to manually redirect
    # output to stdout
    p = self._process
    stdout = sys.stdout
    out = p.fromchild
    while p.poll() == -1:
      line = out.readline().rstrip()
      if len(line) > 0:
        print >> stdout, line
    # read in the last lines that happened between the last -1 poll and the
    # process finishing
    for line in out:
      line = line.rstrip()
      if len(line) > 0:
        print >> stdout, line
    return p.poll()


#######################
# PROFILE SETUP       #
#######################

def initializeProfile(profileDir):
  "Sets up the standard testing profile."

  # Start with a clean slate.
  shutil.rmtree(profileDir, True)
  os.mkdir(profileDir)

  prefs = []

  part = """\
user_pref("browser.dom.window.dump.enabled", true);
user_pref("dom.disable_open_during_load", false);
user_pref("dom.max_script_run_time", 0); // no slow script dialogs
user_pref("signed.applets.codebase_principal_support", true);
user_pref("security.warn_submit_insecure", false);
user_pref("browser.shell.checkDefaultBrowser", false);
user_pref("browser.warnOnQuit", false);
"""
  prefs.append(part)

  # Grant God-power to all the servers on which tests can run.
  for (i, server) in itertools.izip(itertools.count(1), servers):
    part = """
user_pref("capability.principal.codebase.p%(i)d.granted",
          "UniversalXPConnect UniversalBrowserRead UniversalBrowserWrite \
           UniversalPreferencesRead UniversalPreferencesWrite \
           UniversalFileRead");
user_pref("capability.principal.codebase.p%(i)d.id", "http://%(server)s");
user_pref("capability.principal.codebase.p%(i)d.subjectName", "");
"""  % {"i": i, "server": server}
    prefs.append(part)

  # Now add the two servers that do NOT have God-power so we can properly test
  # the granting and receiving of God-power.  Strip off the first server because
  # we proxy all the others to it.
  allServers = servers[1:] + unprivilegedServers


  # Now actually create the preference to make the proxying happen.
  quotedServers = ", ".join(map(lambda x: "'" + x + "'", allServers))

  pacURL = """data:text/plain,
function FindProxyForURL(url, host)
{
  var servers = [%(quotedServers)s];
  var regex = new RegExp('http://(.*?(:\\\\\\\\d+)?)/');
  var matches = regex.exec(url);
  if (!matches)
    return 'DIRECT';
  var hostport = matches[1], port = matches[2];
  if (!port)
    hostport += ':80';
  if (servers.indexOf(hostport) >= 0)
    return 'PROXY localhost:8888';
  return 'DIRECT';
}""" % {"quotedServers": quotedServers}
  pacURL = "".join(pacURL.splitlines())

  part = """
user_pref("network.proxy.type", 2);
user_pref("network.proxy.autoconfig_url", "%(pacURL)s");
""" % {"pacURL": pacURL}
  prefs.append(part)

  # write the preferences
  prefsFile = open(profileDir + "/" + "user.js", "a")
  prefsFile.write("".join(prefs))
  prefsFile.close()


#######################
# RUN THE APP         #
#######################

def runApp(testURL, env, app, profileDir):
  "Run the app, returning the time at which it was started."
  # mark the start
  start = datetime.now()

  # now run with the profile we created
  cmd = app
  if IS_MAC and not cmd.endswith("-bin"):
    cmd += "-bin"
  cmd = os.path.abspath(cmd)

  args = []
  if IS_MAC:
    args.append("-foreground")

  if IS_CYGWIN:
    profileDirectory = commands.getoutput("cygpath -w \"" + profileDir + "/\"")
  else:
    profileDirectory = profileDir + "/"

  args.extend(("-no-remote", "-profile", profileDirectory, testURL))
  proc = Process(cmd, args, env = env)
  print "Application pid: " + str(proc.pid)
  status = proc.wait()
  if status != 0:
    print "FAIL Exited with code " + str(status) + " during test run"

  return start