# vim:set ts=8 sw=8 sts=8 noet: # # ***** BEGIN LICENSE BLOCK ***** # Version: MPL 1.1/GPL 2.0/LGPL 2.1 # # The contents of this file are subject to the Mozilla Public License Version # 1.1 (the "License"); you may not use this file except in compliance with # the License. You may obtain a copy of the License at # http://www.mozilla.org/MPL/ # # Software distributed under the License is distributed on an "AS IS" basis, # WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License # for the specific language governing rights and limitations under the # License. # # The Original Code is mozilla.org code. # # The Initial Developer of the Original Code is # Netscape Communications Corporation. # Portions created by the Initial Developer are Copyright (C) 1998 # the Initial Developer. All Rights Reserved. # # Contributor(s): # Chase Phillips # Benjamin Smedberg # Jeff Walden # # Alternatively, the contents of this file may be used under the terms of # either of the GNU General Public License Version 2 or later (the "GPL"), # or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), # in which case the provisions of the GPL or the LGPL are applicable instead # of those above. If you wish to allow use of your version of this file only # under the terms of either the GPL or the LGPL, and not to allow others to # use your version of this file under the terms of the MPL, indicate your # decision by deleting the provisions above and replace them with the notice # and other provisions required by the GPL or the LGPL. If you do not delete # the provisions above, a recipient may use your version of this file under # the terms of any one of the MPL, the GPL or the LGPL. # # ***** END LICENSE BLOCK ***** ifndef topsrcdir $(error topsrcdir was not set)) endif ifndef MOZILLA_DIR MOZILLA_DIR = $(topsrcdir) endif ifndef INCLUDED_CONFIG_MK include $(topsrcdir)/config/config.mk endif ifndef INCLUDED_VERSION_MK include $(topsrcdir)/config/version.mk endif ifdef SDK_XPIDLSRCS XPIDLSRCS += $(SDK_XPIDLSRCS) endif ifdef SDK_HEADERS EXPORTS += $(SDK_HEADERS) endif REPORT_BUILD = @echo $(notdir $<) ifeq ($(OS_ARCH),OS2) EXEC = else EXEC = exec endif # Don't copy xulrunner files at install time, when using system xulrunner ifdef SYSTEM_LIBXUL SKIP_COPY_XULRUNNER=1 endif # ELOG prints out failed command when building silently (gmake -s). ifneq (,$(findstring -s,$(MAKEFLAGS))) ELOG := $(EXEC) sh $(BUILD_TOOLS)/print-failed-commands.sh else ELOG := endif ifeq (,$(filter-out WINNT WINCE,$(OS_ARCH))) ifndef GNU_CC _LIBNAME_RELATIVE_PATHS=1 endif endif ifeq (,$(filter-out WINNT WINCE,$(OS_ARCH))) _VPATH_SRCS = $(abspath $<) else _VPATH_SRCS = $< endif # Add $(DIST)/lib to VPATH so that -lfoo dependencies are followed VPATH += $(DIST)/lib ifdef LIBXUL_SDK VPATH += $(LIBXUL_SDK)/lib endif # EXPAND_LIBNAME - $(call EXPAND_LIBNAME,foo) # expands to foo.lib on platforms with import libs and -lfoo otherwise # EXPAND_LIBNAME_PATH - $(call EXPAND_LIBNAME_PATH,foo,dir) # expands to dir/foo.lib on platforms with import libs and # -Ldir -lfoo otherwise # EXPAND_MOZLIBNAME - $(call EXPAND_MOZLIBNAME,foo) # expands to $(DIST)/lib/foo.lib on platforms with import libs and # -lfoo otherwise ifdef _LIBNAME_RELATIVE_PATHS EXPAND_LIBNAME = $(foreach lib,$(1),$(LIB_PREFIX)$(lib).$(LIB_SUFFIX)) EXPAND_LIBNAME_PATH = $(foreach lib,$(1),$(2)/$(LIB_PREFIX)$(lib).$(LIB_SUFFIX)) EXPAND_MOZLIBNAME = $(foreach lib,$(1),$(DIST)/lib/$(LIB_PREFIX)$(lib).$(LIB_SUFFIX)) else EXPAND_LIBNAME = $(addprefix -l,$(1)) EXPAND_LIBNAME_PATH = -L$(2) $(addprefix -l,$(1)) EXPAND_MOZLIBNAME = $(addprefix -l,$(1)) endif ifdef EXTRA_DSO_LIBS EXTRA_DSO_LIBS := $(call EXPAND_MOZLIBNAME,$(EXTRA_DSO_LIBS)) endif ################################################################################ # Testing frameworks support ################################################################################ ifdef ENABLE_TESTS ifdef XPCSHELL_TESTS ifndef MODULE $(error Must define MODULE when defining XPCSHELL_TESTS.) endif testxpcobjdir = $(DEPTH)/_tests/xpcshell # Test file installation ifneq (,$(filter WINNT os2-emx,$(HOST_OS_ARCH))) # Windows and OS/2 nsinstall can't recursively copy directories, so use nsinstall.py TEST_INSTALLER = $(PYTHON) $(topsrcdir)/config/nsinstall.py else TEST_INSTALLER = $(INSTALL) endif define _INSTALL_TESTS $(TEST_INSTALLER) $(wildcard $(srcdir)/$(dir)/*) $(testxpcobjdir)/$(MODULE)/$(dir) endef # do not remove the blank line! SOLO_FILE ?= $(error Specify a test filename in SOLO_FILE when using check-interactive or check-one) libs:: $(foreach dir,$(XPCSHELL_TESTS),$(_INSTALL_TESTS)) $(PYTHON) $(MOZILLA_DIR)/config/buildlist.py \ $(testxpcobjdir)/all-test-dirs.list \ $(addprefix $(MODULE)/,$(XPCSHELL_TESTS)) testxpcsrcdir = $(topsrcdir)/testing/xpcshell # Execute all tests in the $(XPCSHELL_TESTS) directories. # See also testsuite-targets.mk 'xpcshell-tests' target for global execution. xpcshell-tests: $(PYTHON) -u $(topsrcdir)/config/pythonpath.py \ -I$(topsrcdir)/build \ $(testxpcsrcdir)/runxpcshelltests.py \ --symbols-path=$(DIST)/crashreporter-symbols \ $(DIST)/bin/xpcshell \ $(foreach dir,$(XPCSHELL_TESTS),$(testxpcobjdir)/$(MODULE)/$(dir)) # Execute a single test, specified in $(SOLO_FILE), but don't automatically # start the test. Instead, present the xpcshell prompt so the user can # attach a debugger and then start the test. check-interactive: $(PYTHON) -u $(topsrcdir)/config/pythonpath.py \ -I$(topsrcdir)/build \ $(testxpcsrcdir)/runxpcshelltests.py \ --symbols-path=$(DIST)/crashreporter-symbols \ --test-path=$(SOLO_FILE) \ --interactive \ $(DIST)/bin/xpcshell \ $(foreach dir,$(XPCSHELL_TESTS),$(testxpcobjdir)/$(MODULE)/$(dir)) # Execute a single test, specified in $(SOLO_FILE) check-one: $(PYTHON) -u $(topsrcdir)/config/pythonpath.py \ -I$(topsrcdir)/build \ $(testxpcsrcdir)/runxpcshelltests.py \ --symbols-path=$(DIST)/crashreporter-symbols \ --test-path=$(SOLO_FILE) \ $(DIST)/bin/xpcshell \ $(foreach dir,$(XPCSHELL_TESTS),$(testxpcobjdir)/$(MODULE)/$(dir)) endif # XPCSHELL_TESTS ifdef CPP_UNIT_TESTS # Compile the tests to $(DIST)/bin. Make lots of niceties available by default # through TestHarness.h, by modifying the list of includes and the libs against # which stuff links. CPPSRCS += $(CPP_UNIT_TESTS) SIMPLE_PROGRAMS += $(CPP_UNIT_TESTS:.cpp=$(BIN_SUFFIX)) INCLUDES += -I$(DIST)/include/testing LIBS += $(XPCOM_GLUE_LDOPTS) $(NSPR_LIBS) # ...and run them the usual way check:: @$(EXIT_ON_ERROR) \ for f in $(subst .cpp,,$(CPP_UNIT_TESTS)); do \ XPCOM_DEBUG_BREAK=stack-and-abort $(RUN_TEST_PROGRAM) $(DIST)/bin/$$f; \ done endif # CPP_UNIT_TESTS .PHONY: check xpcshell-tests check-interactive check-one endif # ENABLE_TESTS # # Library rules # # If BUILD_STATIC_LIBS or FORCE_STATIC_LIB is set, build a static library. # Otherwise, build a shared library. # ifndef LIBRARY ifdef STATIC_LIBRARY_NAME LIBRARY := $(LIB_PREFIX)$(STATIC_LIBRARY_NAME).$(LIB_SUFFIX) endif # STATIC_LIBRARY_NAME endif # LIBRARY ifndef HOST_LIBRARY ifdef HOST_LIBRARY_NAME HOST_LIBRARY := $(LIB_PREFIX)$(HOST_LIBRARY_NAME).$(LIB_SUFFIX) endif endif ifdef LIBRARY ifneq (_1,$(FORCE_SHARED_LIB)_$(BUILD_STATIC_LIBS)) ifdef MKSHLIB ifdef LIB_IS_C_ONLY MKSHLIB = $(MKCSHLIB) endif ifneq (,$(filter OS2 WINNT WINCE,$(OS_ARCH))) IMPORT_LIBRARY := $(LIB_PREFIX)$(SHARED_LIBRARY_NAME).$(IMPORT_LIB_SUFFIX) endif ifeq (OS2,$(OS_ARCH)) ifdef SHORT_LIBNAME SHARED_LIBRARY_NAME := $(SHORT_LIBNAME) endif endif ifdef MAKE_FRAMEWORK SHARED_LIBRARY := $(SHARED_LIBRARY_NAME) else SHARED_LIBRARY := $(DLL_PREFIX)$(SHARED_LIBRARY_NAME)$(DLL_SUFFIX) endif ifeq ($(OS_ARCH),OS2) DEF_FILE := $(SHARED_LIBRARY:.dll=.def) endif ifdef MOZ_ENABLE_LIBXUL EMBED_MANIFEST_AT=2 endif endif # MKSHLIB endif # FORCE_SHARED_LIB && !BUILD_STATIC_LIBS endif # LIBRARY ifeq (,$(BUILD_STATIC_LIBS)$(FORCE_STATIC_LIB)) LIBRARY := $(NULL) endif ifeq (_1,$(FORCE_SHARED_LIB)_$(BUILD_STATIC_LIBS)) SHARED_LIBRARY := $(NULL) DEF_FILE := $(NULL) IMPORT_LIBRARY := $(NULL) endif ifdef FORCE_STATIC_LIB ifndef FORCE_SHARED_LIB SHARED_LIBRARY := $(NULL) DEF_FILE := $(NULL) IMPORT_LIBRARY := $(NULL) endif endif ifdef FORCE_SHARED_LIB ifndef FORCE_STATIC_LIB LIBRARY := $(NULL) endif endif ifdef JAVA_LIBRARY_NAME JAVA_LIBRARY := $(JAVA_LIBRARY_NAME).jar endif ifeq (,$(filter-out WINNT WINCE,$(OS_ARCH))) ifndef GNU_CC # # Unless we're building SIMPLE_PROGRAMS, all C++ files share a PDB file per # directory. For parallel builds, this PDB file is shared and locked by # MSPDBSRV.EXE, starting with MSVC8 SP1. If you're using MSVC 7.1 or MSVC8 # without SP1, don't do parallel builds. # # The final PDB for libraries and programs is created by the linker and uses # a different name from the single PDB file created by the compiler. See # bug 462740. # ifdef SIMPLE_PROGRAMS COMPILE_PDBFILE = $(basename $(@F)).pdb else COMPILE_PDBFILE = generated.pdb endif LINK_PDBFILE = $(basename $(@F)).pdb ifdef MOZ_DEBUG CODFILE=$(basename $(@F)).cod endif ifdef MOZ_MAPINFO ifdef SHARED_LIBRARY_NAME MAPFILE=$(SHARED_LIBRARY_NAME).map else MAPFILE=$(basename $(@F)).map endif # SHARED_LIBRARY_NAME endif # MOZ_MAPINFO ifdef DEFFILE OS_LDFLAGS += -DEF:$(call normalizepath,$(DEFFILE)) EXTRA_DEPS += $(DEFFILE) endif ifdef MAPFILE OS_LDFLAGS += -MAP:$(MAPFILE) endif endif # !GNU_CC ifdef ENABLE_CXX_EXCEPTIONS ifdef GNU_CC CXXFLAGS += -fexceptions else ifeq (,$(filter-out 1200 1300 1310,$(_MSC_VER))) CXXFLAGS += -GX else CXXFLAGS += -EHsc endif # _MSC_VER endif # GNU_CC endif # ENABLE_CXX_EXCEPTIONS endif # WINNT ifeq ($(SOLARIS_SUNPRO_CXX),1) CXXFLAGS += -features=extensions -D__FUNCTION__=__func__ ifeq (86,$(findstring 86,$(OS_TEST))) OS_LDFLAGS += -M $(topsrcdir)/config/solaris_ia32.map endif # x86 endif # Solaris Sun Studio C++ ifeq (,$(filter-out WINNT WINCE,$(HOST_OS_ARCH))) HOST_PDBFILE=$(basename $(@F)).pdb endif ifndef TARGETS TARGETS = $(LIBRARY) $(SHARED_LIBRARY) $(PROGRAM) $(SIMPLE_PROGRAMS) $(HOST_LIBRARY) $(HOST_PROGRAM) $(HOST_SIMPLE_PROGRAMS) $(JAVA_LIBRARY) endif ifndef OBJS _OBJS = \ $(JRI_STUB_CFILES) \ $(addsuffix .$(OBJ_SUFFIX), $(JMC_GEN)) \ $(CSRCS:.c=.$(OBJ_SUFFIX)) \ $(SSRCS:.S=.$(OBJ_SUFFIX)) \ $(patsubst %.cc,%.$(OBJ_SUFFIX),$(CPPSRCS:.cpp=.$(OBJ_SUFFIX))) \ $(CMSRCS:.m=.$(OBJ_SUFFIX)) \ $(CMMSRCS:.mm=.$(OBJ_SUFFIX)) \ $(ASFILES:.$(ASM_SUFFIX)=.$(OBJ_SUFFIX)) OBJS = $(strip $(_OBJS)) endif ifndef HOST_OBJS _HOST_OBJS = \ $(addprefix host_,$(HOST_CSRCS:.c=.$(OBJ_SUFFIX))) \ $(addprefix host_,$(patsubst %.cc,%.$(OBJ_SUFFIX),$(HOST_CPPSRCS:.cpp=.$(OBJ_SUFFIX)))) \ $(addprefix host_,$(HOST_CMSRCS:.m=.$(OBJ_SUFFIX))) \ $(addprefix host_,$(HOST_CMMSRCS:.mm=.$(OBJ_SUFFIX))) HOST_OBJS = $(strip $(_HOST_OBJS)) endif LIBOBJS := $(addprefix \", $(OBJS)) LIBOBJS := $(addsuffix \", $(LIBOBJS)) ifndef MOZ_AUTO_DEPS ifneq (,$(OBJS)$(XPIDLSRCS)$(SIMPLE_PROGRAMS)) MDDEPFILES = $(addprefix $(MDDEPDIR)/,$(OBJS:.$(OBJ_SUFFIX)=.pp)) ifndef NO_GEN_XPT MDDEPFILES += $(addprefix $(MDDEPDIR)/,$(XPIDLSRCS:.idl=.xpt)) endif endif endif ALL_TRASH = \ $(GARBAGE) $(TARGETS) $(OBJS) $(PROGOBJS) LOGS TAGS a.out \ $(filter-out $(ASFILES),$(OBJS:.$(OBJ_SUFFIX)=.s)) $(OBJS:.$(OBJ_SUFFIX)=.ii) \ $(OBJS:.$(OBJ_SUFFIX)=.i) \ $(HOST_PROGOBJS) $(HOST_OBJS) $(IMPORT_LIBRARY) $(DEF_FILE)\ $(EXE_DEF_FILE) so_locations _gen _stubs $(wildcard *.res) $(wildcard *.RES) \ $(wildcard *.pdb) $(CODFILE) $(MAPFILE) $(IMPORT_LIBRARY) \ $(SHARED_LIBRARY:$(DLL_SUFFIX)=.exp) $(wildcard *.ilk) \ $(PROGRAM:$(BIN_SUFFIX)=.exp) $(SIMPLE_PROGRAMS:$(BIN_SUFFIX)=.exp) \ $(PROGRAM:$(BIN_SUFFIX)=.lib) $(SIMPLE_PROGRAMS:$(BIN_SUFFIX)=.lib) \ $(SIMPLE_PROGRAMS:$(BIN_SUFFIX)=.$(OBJ_SUFFIX)) \ $(wildcard gts_tmp_*) $(LIBRARY:%.a=.%.timestamp) ALL_TRASH_DIRS = \ $(GARBAGE_DIRS) /no-such-file ifdef QTDIR GARBAGE += $(MOCSRCS) endif ifdef SIMPLE_PROGRAMS GARBAGE += $(SIMPLE_PROGRAMS:%=%.$(OBJ_SUFFIX)) endif ifdef HOST_SIMPLE_PROGRAMS GARBAGE += $(HOST_SIMPLE_PROGRAMS:%=%.$(OBJ_SUFFIX)) endif # # the Solaris WorkShop template repository cache. it occasionally can get # out of sync, so targets like clobber should kill it. # ifeq ($(SOLARIS_SUNPRO_CXX),1) GARBAGE_DIRS += SunWS_cache endif ifeq ($(OS_ARCH),OpenVMS) GARBAGE += $(wildcard *.*_defines) ifdef SHARED_LIBRARY VMS_SYMVEC_FILE = $(SHARED_LIBRARY:$(DLL_SUFFIX)=_symvec.opt) ifdef MOZ_DEBUG VMS_SYMVEC_FILE_MODULE = $(topsrcdir)/build/unix/vms/$(notdir $(SHARED_LIBRARY:$(DLL_SUFFIX)=_dbg_symvec.opt)) else VMS_SYMVEC_FILE_MODULE = $(topsrcdir)/build/unix/vms/$(notdir $(SHARED_LIBRARY:$(DLL_SUFFIX)=_symvec.opt)) endif VMS_SYMVEC_FILE_COMP = $(topsrcdir)/build/unix/vms/component_symvec.opt GARBAGE += $(VMS_SYMVEC_FILE) ifdef IS_COMPONENT DSO_LDOPTS := $(filter-out -auto_symvec,$(DSO_LDOPTS)) $(VMS_SYMVEC_FILE) endif endif endif XPIDL_GEN_DIR = _xpidlgen ifdef MOZ_UPDATE_XTERM # Its good not to have a newline at the end of the titlebar string because it # makes the make -s output easier to read. Echo -n does not work on all # platforms, but we can trick sed into doing it. UPDATE_TITLE = sed -e "s!Y!$(1) in $(shell $(BUILD_TOOLS)/print-depth-path.sh)/$(2)!" $(MOZILLA_DIR)/config/xterm.str; endif define SUBMAKE # $(call SUBMAKE,target,directory) @$(UPDATE_TITLE) +@$(MAKE) $(if $(2),-C $(2)) $(1) endef # The extra line is important here! don't delete it ifneq (,$(strip $(DIRS))) LOOP_OVER_DIRS = \ $(foreach dir,$(DIRS),$(call SUBMAKE,$@,$(dir))) endif # we only use this for the makefiles target and other stuff that doesn't matter ifneq (,$(strip $(PARALLEL_DIRS))) LOOP_OVER_PARALLEL_DIRS = \ $(foreach dir,$(PARALLEL_DIRS),$(call SUBMAKE,$@,$(dir))) endif ifneq (,$(strip $(STATIC_DIRS))) LOOP_OVER_STATIC_DIRS = \ $(foreach dir,$(STATIC_DIRS),$(call SUBMAKE,$@,$(dir))) endif ifneq (,$(strip $(TOOL_DIRS))) LOOP_OVER_TOOL_DIRS = \ $(foreach dir,$(TOOL_DIRS),$(call SUBMAKE,$@,$(dir))) endif ifdef PARALLEL_DIRS # create a bunch of fake targets for order-only processing PARALLEL_DIRS_export = $(addsuffix _export,$(PARALLEL_DIRS)) PARALLEL_DIRS_libs = $(addsuffix _libs,$(PARALLEL_DIRS)) PARALLEL_DIRS_tools = $(addsuffix _tools,$(PARALLEL_DIRS)) .PHONY: $(PARALLEL_DIRS_export) $(PARALLEL_DIRS_libs) $(PARALLEL_DIRS_tools) endif # # Now we can differentiate between objects used to build a library, and # objects used to build an executable in the same directory. # ifndef PROGOBJS PROGOBJS = $(OBJS) endif ifndef HOST_PROGOBJS HOST_PROGOBJS = $(HOST_OBJS) endif # MAKE_DIRS: List of directories to build while looping over directories. # A Makefile that needs $(MDDEPDIR) created but doesn't set any of these # variables we know to check can just set NEED_MDDEPDIR explicitly. ifneq (,$(OBJS)$(XPIDLSRCS)$(SIMPLE_PROGRAMS)$(NEED_MDDEPDIR)) MAKE_DIRS += $(CURDIR)/$(MDDEPDIR) GARBAGE_DIRS += $(MDDEPDIR) endif # # Tags: emacs (etags), vi (ctags) # TAG_PROGRAM := ctags -L - # TAG_PROGRAM = xargs etags -a # # Turn on C++ linking if we have any .cpp or .mm files # (moved this from config.mk so that config.mk can be included # before the CPPSRCS are defined) # ifneq ($(CPPSRCS)$(CMMSRCS),) CPP_PROG_LINK = 1 endif # # Make sure to wrap static libs inside linker specific flags to turn on & off # inclusion of all symbols inside the static libs # ifndef NO_LD_ARCHIVE_FLAGS ifdef SHARED_LIBRARY_LIBS EXTRA_DSO_LDOPTS := $(MKSHLIB_FORCE_ALL) $(SHARED_LIBRARY_LIBS) $(MKSHLIB_UNFORCE_ALL) $(EXTRA_DSO_LDOPTS) endif endif # # This will strip out symbols that the component should not be # exporting from the .dynsym section. # ifdef IS_COMPONENT EXTRA_DSO_LDOPTS += $(MOZ_COMPONENTS_VERSION_SCRIPT_LDFLAGS) endif # IS_COMPONENT # # Enforce the requirement that MODULE_NAME must be set # for components in static builds # ifdef IS_COMPONENT ifdef EXPORT_LIBRARY ifndef FORCE_SHARED_LIB ifndef MODULE_NAME $(error MODULE_NAME is required for components which may be used in static builds) endif endif endif endif # # MacOS X specific stuff # ifeq ($(OS_ARCH),Darwin) ifdef SHARED_LIBRARY ifdef IS_COMPONENT EXTRA_DSO_LDOPTS += -bundle else EXTRA_DSO_LDOPTS += -dynamiclib -install_name @executable_path/$(SHARED_LIBRARY) -compatibility_version 1 -current_version 1 -single_module endif endif endif # # On NetBSD a.out systems, use -Bsymbolic. This fixes what would otherwise be # fatal symbol name clashes between components. # ifeq ($(OS_ARCH),NetBSD) ifeq ($(DLL_SUFFIX),.so.1.0) ifdef IS_COMPONENT EXTRA_DSO_LDOPTS += -Wl,-Bsymbolic endif endif endif ifeq ($(OS_ARCH),FreeBSD) ifdef IS_COMPONENT EXTRA_DSO_LDOPTS += -Wl,-Bsymbolic endif endif ifeq ($(OS_ARCH),NetBSD) ifneq (,$(filter arc cobalt hpcmips mipsco newsmips pmax sgimips,$(OS_TEST))) ifeq ($(MODULE),layout) OS_CFLAGS += -Wa,-xgot OS_CXXFLAGS += -Wa,-xgot endif endif endif ifeq ($(OS_ARCH),Linux) ifneq (,$(filter mips mipsel,$(OS_TEST))) ifeq ($(MODULE),layout) OS_CFLAGS += -Wa,-xgot OS_CXXFLAGS += -Wa,-xgot endif endif endif # # HP-UXBeOS specific section: for COMPONENTS only, add -Bsymbolic flag # which uses internal symbols first # ifeq ($(OS_ARCH),HP-UX) ifdef IS_COMPONENT ifeq ($(GNU_CC)$(GNU_CXX),) EXTRA_DSO_LDOPTS += -Wl,-Bsymbolic ifneq ($(HAS_EXTRAEXPORTS),1) MKSHLIB += -Wl,+eNSGetModule -Wl,+eerrno MKCSHLIB += +eNSGetModule +eerrno ifneq ($(OS_TEST),ia64) MKSHLIB += -Wl,+e_shlInit MKCSHLIB += +e_shlInit endif # !ia64 endif # !HAS_EXTRAEXPORTS endif # non-gnu compilers endif # IS_COMPONENT endif # HP-UX ifeq ($(OS_ARCH),AIX) ifdef IS_COMPONENT ifneq ($(HAS_EXTRAEXPORTS),1) MKSHLIB += -bE:$(MOZILLA_DIR)/build/unix/aix.exp -bnoexpall MKCSHLIB += -bE:$(MOZILLA_DIR)/build/unix/aix.exp -bnoexpall endif # HAS_EXTRAEXPORTS endif # IS_COMPONENT endif # AIX # # OSF1: add -B symbolic flag for components # ifeq ($(OS_ARCH),OSF1) ifdef IS_COMPONENT ifeq ($(GNU_CC)$(GNU_CXX),) EXTRA_DSO_LDOPTS += -B symbolic endif endif endif # # Linux: add -Bsymbolic flag for components # ifeq ($(OS_ARCH),Linux) ifdef IS_COMPONENT EXTRA_DSO_LDOPTS += -Wl,-Bsymbolic endif endif # # MINGW32 # ifeq ($(OS_ARCH),WINNT) ifdef GNU_CC ifndef IS_COMPONENT DSO_LDOPTS += -Wl,--out-implib -Wl,$(IMPORT_LIBRARY) endif endif endif ifeq ($(USE_TVFS),1) IFLAGS1 = -rb IFLAGS2 = -rb else IFLAGS1 = -m 644 IFLAGS2 = -m 755 endif ifeq (_WINNT,$(GNU_CC)_$(OS_ARCH)) OUTOPTION = -Fo# eol else OUTOPTION = -o # eol endif # WINNT && !GNU_CC ifneq (,$(filter WINCE,$(OS_ARCH))) OUTOPTION = -Fo# eol endif ifeq ($(OS_ARCH), WINCE) OUTOPTION = -Fo# eol HOST_OUTOPTION = -Fo# eol else ifeq (,$(CROSS_COMPILE)) HOST_OUTOPTION = $(OUTOPTION) else HOST_OUTOPTION = -o # eol endif endif ################################################################################ # SUBMAKEFILES: List of Makefiles for next level down. # This is used to update or create the Makefiles before invoking them. SUBMAKEFILES += $(addsuffix /Makefile, $(DIRS) $(TOOL_DIRS) $(PARALLEL_DIRS)) # The root makefile doesn't want to do a plain export/libs, because # of the tiers and because of libxul. Suppress the default rules in favor # of something else. Makefiles which use this var *must* provide a sensible # default rule before including rules.mk ifndef SUPPRESS_DEFAULT_RULES ifdef TIERS default all alldep:: $(foreach tier,$(TIERS),$(call SUBMAKE,tier_$(tier))) else default all:: ifneq (,$(strip $(STATIC_DIRS))) $(foreach dir,$(STATIC_DIRS),$(call SUBMAKE,,$(dir))) endif $(MAKE) export $(MAKE) libs $(MAKE) tools # Do depend as well alldep:: $(MAKE) export $(MAKE) depend $(MAKE) libs $(MAKE) tools endif # TIERS endif # SUPPRESS_DEFAULT_RULES ifeq ($(filter s,$(MAKEFLAGS)),) ECHO := echo QUIET := else ECHO := true QUIET := -q endif MAKE_TIER_SUBMAKEFILES = +$(if $(tier_$*_dirs),$(MAKE) $(addsuffix /Makefile,$(tier_$*_dirs))) export_tier_%: @$(ECHO) "$@" @$(MAKE_TIER_SUBMAKEFILES) $(foreach dir,$(tier_$*_dirs),$(call SUBMAKE,export,$(dir))) libs_tier_%: @$(ECHO) "$@" @$(MAKE_TIER_SUBMAKEFILES) $(foreach dir,$(tier_$*_dirs),$(call SUBMAKE,libs,$(dir))) tools_tier_%: @$(ECHO) "$@" @$(MAKE_TIER_SUBMAKEFILES) $(foreach dir,$(tier_$*_dirs),$(call SUBMAKE,tools,$(dir))) $(foreach tier,$(TIERS),tier_$(tier)):: @$(ECHO) "$@: $($@_staticdirs) $($@_dirs)" $(foreach dir,$($@_staticdirs),$(call SUBMAKE,,$(dir))) $(MAKE) export_$@ $(MAKE) libs_$@ $(MAKE) tools_$@ # Do everything from scratch everything:: $(MAKE) clean $(MAKE) alldep # Add dummy depend target for tinderboxes depend:: # Target to only regenerate makefiles makefiles: $(SUBMAKEFILES) ifneq (,$(DIRS)$(TOOL_DIRS)$(PARALLEL_DIRS)) $(LOOP_OVER_PARALLEL_DIRS) $(LOOP_OVER_DIRS) $(LOOP_OVER_TOOL_DIRS) endif ifdef PARALLEL_DIRS export:: $(PARALLEL_DIRS_export) $(PARALLEL_DIRS_export): %_export: %/Makefile +@$(call SUBMAKE,export,$*) endif export:: $(SUBMAKEFILES) $(MAKE_DIRS) $(if $(XPIDLSRCS),$(IDL_DIR)) $(LOOP_OVER_DIRS) $(LOOP_OVER_TOOL_DIRS) ifdef PARALLEL_DIRS tools:: $(PARALLEL_DIRS_tools) $(PARALLEL_DIRS_tools): %_tools: %/Makefile +@$(call SUBMAKE,tools,$*) endif tools:: $(SUBMAKEFILES) $(MAKE_DIRS) $(LOOP_OVER_DIRS) ifneq (,$(strip $(TOOL_DIRS))) $(foreach dir,$(TOOL_DIRS),$(call SUBMAKE,libs,$(dir))) endif # # Rule to create list of libraries for final link # export:: ifdef LIBRARY_NAME ifdef EXPORT_LIBRARY ifdef IS_COMPONENT ifdef BUILD_STATIC_LIBS @$(PYTHON) $(MOZILLA_DIR)/config/buildlist.py $(FINAL_LINK_COMPS) $(STATIC_LIBRARY_NAME) ifdef MODULE_NAME @$(PYTHON) $(MOZILLA_DIR)/config/buildlist.py $(FINAL_LINK_COMP_NAMES) $(MODULE_NAME) endif endif # BUILD_STATIC_LIBS else # !IS_COMPONENT $(PYTHON) $(MOZILLA_DIR)/config/buildlist.py $(FINAL_LINK_LIBS) $(STATIC_LIBRARY_NAME) endif # IS_COMPONENT endif # EXPORT_LIBRARY endif # LIBRARY_NAME # Create dependencies on static (and shared EXTRA_DSO_LIBS) libraries LIBS_DEPS = $(filter %.$(LIB_SUFFIX), $(LIBS)) HOST_LIBS_DEPS = $(filter %.$(LIB_SUFFIX), $(HOST_LIBS)) DSO_LDOPTS_DEPS = $(EXTRA_DSO_LIBS) $(filter %.$(LIB_SUFFIX), $(EXTRA_DSO_LDOPTS)) ifndef _LIBNAME_RELATIVE_PATHS LIBS_DEPS += $(filter -l%, $(LIBS)) HOST_LIBS_DEPS += $(filter -l%, $(HOST_LIBS)) DSO_LDOPTS_DEPS += $(filter -l%, $(EXTRA_DSO_LDOPTS)) _LIBDIRS = $(patsubst -L%,%,$(filter -L%, $(LIBS) $(HOST_LIBS) $(EXTRA_DSO_LDOPTS))) ifneq (,$(_LIBDIRS)) vpath $(LIB_PREFIX)%.$(LIB_SUFFIX) $(_LIBDIRS) ifdef IMPORT_LIB_SUFFIX vpath $(LIB_PREFIX)%.$(IMPORT_LIB_SUFFIX) $(_LIBDIRS) endif # IMPORT_LIB_SUFFIX vpath $(DLL_PREFIX)%$(DLL_SUFFIX) $(_LIBDIRS) endif # _LIBDIRS endif # _LIBNAME_RELATIVE_PATHS # Dependancies which, if modified, should cause everything to rebuild GLOBAL_DEPS += Makefile Makefile.in $(DEPTH)/config/autoconf.mk $(topsrcdir)/config/config.mk ############################################## ifdef PARALLEL_DIRS libs:: $(PARALLEL_DIRS_libs) $(PARALLEL_DIRS_libs): %_libs: %/Makefile +@$(call SUBMAKE,libs,$*) endif libs:: $(SUBMAKEFILES) $(MAKE_DIRS) $(HOST_LIBRARY) $(LIBRARY) $(SHARED_LIBRARY) $(IMPORT_LIBRARY) $(HOST_PROGRAM) $(PROGRAM) $(HOST_SIMPLE_PROGRAMS) $(SIMPLE_PROGRAMS) $(JAVA_LIBRARY) ifndef NO_DIST_INSTALL ifdef LIBRARY ifdef EXPORT_LIBRARY # Stage libs that will be linked into a static build ifdef IS_COMPONENT $(INSTALL) $(IFLAGS1) $(LIBRARY) $(DEPTH)/staticlib/components else $(INSTALL) $(IFLAGS1) $(LIBRARY) $(DEPTH)/staticlib endif endif # EXPORT_LIBRARY ifdef DIST_INSTALL ifdef IS_COMPONENT $(error Shipping static component libs makes no sense.) else $(INSTALL) $(IFLAGS1) $(LIBRARY) $(DIST)/lib endif endif # DIST_INSTALL endif # LIBRARY ifdef SHARED_LIBRARY ifdef IS_COMPONENT $(INSTALL) $(IFLAGS2) $(SHARED_LIBRARY) $(FINAL_TARGET)/components $(ELF_DYNSTR_GC) $(FINAL_TARGET)/components/$(SHARED_LIBRARY) @$(PYTHON) $(MOZILLA_DIR)/config/buildlist.py $(FINAL_TARGET)/components/components.list $(SHARED_LIBRARY) ifdef BEOS_ADDON_WORKAROUND ( cd $(FINAL_TARGET)/components && $(CC) -nostart -o $(SHARED_LIBRARY).stub $(SHARED_LIBRARY) ) endif else # ! IS_COMPONENT ifneq (,$(filter OS2 WINNT WINCE,$(OS_ARCH))) $(INSTALL) $(IFLAGS2) $(IMPORT_LIBRARY) $(DIST)/lib else $(INSTALL) $(IFLAGS2) $(SHARED_LIBRARY) $(DIST)/lib endif $(INSTALL) $(IFLAGS2) $(SHARED_LIBRARY) $(FINAL_TARGET) ifdef BEOS_ADDON_WORKAROUND ( cd $(FINAL_TARGET) && $(CC) -nostart -o $(SHARED_LIBRARY).stub $(SHARED_LIBRARY) ) endif endif # IS_COMPONENT endif # SHARED_LIBRARY ifdef PROGRAM $(INSTALL) $(IFLAGS2) $(PROGRAM) $(FINAL_TARGET) endif ifdef SIMPLE_PROGRAMS $(INSTALL) $(IFLAGS2) $(SIMPLE_PROGRAMS) $(FINAL_TARGET) endif ifdef HOST_PROGRAM $(INSTALL) $(IFLAGS2) $(HOST_PROGRAM) $(DIST)/host/bin endif ifdef HOST_SIMPLE_PROGRAMS $(INSTALL) $(IFLAGS2) $(HOST_SIMPLE_PROGRAMS) $(DIST)/host/bin endif ifdef HOST_LIBRARY $(INSTALL) $(IFLAGS1) $(HOST_LIBRARY) $(DIST)/host/lib endif ifdef JAVA_LIBRARY ifdef IS_COMPONENT $(INSTALL) $(IFLAGS1) $(JAVA_LIBRARY) $(FINAL_TARGET)/components else $(INSTALL) $(IFLAGS1) $(JAVA_LIBRARY) $(FINAL_TARGET) endif endif # JAVA_LIBRARY endif # !NO_DIST_INSTALL $(LOOP_OVER_DIRS) ############################################## ifndef NO_PROFILE_GUIDED_OPTIMIZE ifdef MOZ_PROFILE_USE ifeq ($(OS_ARCH)_$(GNU_CC)$(INTERNAL_TOOLS), WINNT_) # When building with PGO, we have to make sure to re-link # in the MOZ_PROFILE_USE phase if we linked in the # MOZ_PROFILE_GENERATE phase. We'll touch this pgo.relink # file in the link rule in the GENERATE phase to indicate # that we need a relink. ifdef SHARED_LIBRARY $(SHARED_LIBRARY): pgo.relink endif ifdef PROGRAM $(PROGRAM): pgo.relink endif # In the second pass, we need to merge the pgc files into the pgd file. # The compiler would do this for us automatically if they were in the right # place, but they're in dist/bin. ifneq (,$(SHARED_LIBRARY)$(PROGRAM)) export:: ifdef PROGRAM $(PYTHON) $(topsrcdir)/build/win32/pgomerge.py \ $(PROGRAM:$(BIN_SUFFIX)=) $(DIST)/bin endif ifdef SHARED_LIBRARY $(PYTHON) $(topsrcdir)/build/win32/pgomerge.py \ $(SHARED_LIBRARY_NAME) $(DIST)/bin endif endif # SHARED_LIBRARY || PROGRAM endif # WINNT_ endif # MOZ_PROFILE_GENERATE || MOZ_PROFILE_USE endif # NO_PROFILE_GUIDED_OPTIMIZE ############################################## checkout: $(MAKE) -C $(topsrcdir) -f client.mk checkout clean clobber realclean clobber_all:: $(SUBMAKEFILES) -rm -f $(ALL_TRASH) -rm -rf $(ALL_TRASH_DIRS) $(foreach dir,$(PARALLEL_DIRS) $(DIRS) $(STATIC_DIRS) $(TOOL_DIRS),-$(call SUBMAKE,$@,$(dir))) distclean:: $(SUBMAKEFILES) $(foreach dir,$(PARALLEL_DIRS) $(DIRS) $(STATIC_DIRS) $(TOOL_DIRS),-$(call SUBMAKE,$@,$(dir))) -rm -rf $(ALL_TRASH_DIRS) -rm -f $(ALL_TRASH) \ Makefile .HSancillary \ $(wildcard *.$(OBJ_SUFFIX)) $(wildcard *.ho) $(wildcard host_*.o*) \ $(wildcard *.$(LIB_SUFFIX)) $(wildcard *$(DLL_SUFFIX)) \ $(wildcard *.$(IMPORT_LIB_SUFFIX)) ifeq ($(OS_ARCH),OS2) -rm -f $(PROGRAM:.exe=.map) endif alltags: rm -f TAGS find $(topsrcdir) -name dist -prune -o \( -name '*.[hc]' -o -name '*.cp' -o -name '*.cpp' -o -name '*.idl' \) -print | $(TAG_PROGRAM) # # PROGRAM = Foo # creates OBJS, links with LIBS to create Foo # $(PROGRAM): $(PROGOBJS) $(LIBS_DEPS) $(EXTRA_DEPS) $(EXE_DEF_FILE) $(RESFILE) $(GLOBAL_DEPS) @rm -f $@.manifest ifeq (WINCE,$(OS_ARCH)) $(LD) -NOLOGO -OUT:$@ $(WIN32_EXE_LDFLAGS) $(LDFLAGS) $(PROGOBJS) $(RESFILE) $(LIBS) $(EXTRA_LIBS) $(OS_LIBS) else ifeq (_WINNT,$(GNU_CC)_$(OS_ARCH)) $(LD) -NOLOGO -OUT:$@ -PDB:$(LINK_PDBFILE) $(WIN32_EXE_LDFLAGS) $(LDFLAGS) $(PROGOBJS) $(RESFILE) $(LIBS) $(EXTRA_LIBS) $(OS_LIBS) ifdef MSMANIFEST_TOOL @if test -f $@.manifest; then \ if test -f "$(srcdir)/$@.manifest"; then \ echo "Embedding manifest from $(srcdir)/$@.manifest and $@.manifest"; \ mt.exe -NOLOGO -MANIFEST "$(win_srcdir)/$@.manifest" $@.manifest -OUTPUTRESOURCE:$@\;1; \ else \ echo "Embedding manifest from $@.manifest"; \ mt.exe -NOLOGO -MANIFEST $@.manifest -OUTPUTRESOURCE:$@\;1; \ fi; \ elif test -f "$(srcdir)/$@.manifest"; then \ echo "Embedding manifest from $(srcdir)/$@.manifest"; \ mt.exe -NOLOGO -MANIFEST "$(win_srcdir)/$@.manifest" -OUTPUTRESOURCE:$@\;1; \ fi endif # MSVC with manifest tool ifdef MOZ_PROFILE_GENERATE # touch it a few seconds into the future to work around FAT's # 2-second granularity touch -t `date +%Y%m%d%H%M.%S -d "now+5seconds"` pgo.relink endif else # !WINNT || GNU_CC ifeq ($(CPP_PROG_LINK),1) $(CCC) -o $@ $(CXXFLAGS) $(WRAP_MALLOC_CFLAGS) $(PROGOBJS) $(RESFILE) $(WIN32_EXE_LDFLAGS) $(SOLARIS_JEMALLOC_LDFLAGS) $(LDFLAGS) $(LIBS_DIR) $(LIBS) $(OS_LIBS) $(EXTRA_LIBS) $(BIN_FLAGS) $(WRAP_MALLOC_LIB) $(EXE_DEF_FILE) else # ! CPP_PROG_LINK $(CC) -o $@ $(CFLAGS) $(PROGOBJS) $(RESFILE) $(WIN32_EXE_LDFLAGS) $(SOLARIS_JEMALLOC_LDFLAGS) $(LDFLAGS) $(LIBS_DIR) $(LIBS) $(OS_LIBS) $(EXTRA_LIBS) $(BIN_FLAGS) $(EXE_DEF_FILE) endif # CPP_PROG_LINK endif # WINNT && !GNU_CC endif # WINCE ifdef ENABLE_STRIP $(STRIP) $@ endif ifdef MOZ_POST_PROGRAM_COMMAND $(MOZ_POST_PROGRAM_COMMAND) $@ endif ifeq ($(OS_ARCH),BeOS) ifdef BEOS_PROGRAM_RESOURCE xres -o $@ $(BEOS_PROGRAM_RESOURCE) mimeset $@ endif endif # BeOS $(HOST_PROGRAM): $(HOST_PROGOBJS) $(HOST_LIBS_DEPS) $(HOST_EXTRA_DEPS) $(GLOBAL_DEPS) ifeq (WINCE,$(OS_ARCH)) $(HOST_LD) -NOLOGO -OUT:$@ $(HOST_OBJS) $(WIN32_EXE_LDFLAGS) $(HOST_LIBS) $(HOST_EXTRA_LIBS) else ifeq (_WINNT,$(GNU_CC)_$(HOST_OS_ARCH)) $(HOST_LD) -NOLOGO -OUT:$@ -PDB:$(HOST_PDBFILE) $(HOST_OBJS) $(WIN32_EXE_LDFLAGS) $(HOST_LIBS) $(HOST_EXTRA_LIBS) ifdef MSMANIFEST_TOOL @if test -f $@.manifest; then \ if test -f "$(srcdir)/$@.manifest"; then \ mt.exe -NOLOGO -MANIFEST "$(win_srcdir)/$@.manifest" $@.manifest -OUTPUTRESOURCE:$@\;1; \ else \ mt.exe -NOLOGO -MANIFEST $@.manifest -OUTPUTRESOURCE:$@\;1; \ fi; \ rm -f $@.manifest; \ fi endif # MSVC with manifest tool else ifeq ($(CPP_PROG_LINK),1) $(HOST_CXX) -o $@ $(HOST_CXXFLAGS) $(HOST_LDFLAGS) $(HOST_PROGOBJS) $(HOST_LIBS) $(HOST_EXTRA_LIBS) else $(HOST_CC) -o $@ $(HOST_CFLAGS) $(HOST_LDFLAGS) $(HOST_PROGOBJS) $(HOST_LIBS) $(HOST_EXTRA_LIBS) endif # CPP_PROG_LINK endif endif # # This is an attempt to support generation of multiple binaries # in one directory, it assumes everything to compile Foo is in # Foo.o (from either Foo.c or Foo.cpp). # # SIMPLE_PROGRAMS = Foo Bar # creates Foo.o Bar.o, links with LIBS to create Foo, Bar. # $(SIMPLE_PROGRAMS): %$(BIN_SUFFIX): %.$(OBJ_SUFFIX) $(LIBS_DEPS) $(EXTRA_DEPS) $(GLOBAL_DEPS) ifeq (WINCE,$(OS_ARCH)) $(LD) -nologo -entry:main -out:$@ $< $(WIN32_EXE_LDFLAGS) $(LDFLAGS) $(LIBS) $(EXTRA_LIBS) $(OS_LIBS) else ifeq (_WINNT,$(GNU_CC)_$(OS_ARCH)) $(LD) -nologo -out:$@ -pdb:$(LINK_PDBFILE) $< $(WIN32_EXE_LDFLAGS) $(LDFLAGS) $(LIBS) $(EXTRA_LIBS) $(OS_LIBS) ifdef MSMANIFEST_TOOL @if test -f $@.manifest; then \ mt.exe -NOLOGO -MANIFEST $@.manifest -OUTPUTRESOURCE:$@\;1; \ rm -f $@.manifest; \ fi endif # MSVC with manifest tool else ifeq ($(CPP_PROG_LINK),1) $(CCC) $(WRAP_MALLOC_CFLAGS) $(CXXFLAGS) -o $@ $< $(WIN32_EXE_LDFLAGS) $(SOLARIS_JEMALLOC_LDFLAGS) $(LDFLAGS) $(LIBS_DIR) $(LIBS) $(OS_LIBS) $(EXTRA_LIBS) $(WRAP_MALLOC_LIB) $(BIN_FLAGS) else $(CC) $(WRAP_MALLOC_CFLAGS) $(CFLAGS) $(OUTOPTION)$@ $< $(WIN32_EXE_LDFLAGS) $(SOLARIS_JEMALLOC_LDFLAGS) $(LDFLAGS) $(LIBS_DIR) $(LIBS) $(OS_LIBS) $(EXTRA_LIBS) $(WRAP_MALLOC_LIB) $(BIN_FLAGS) endif # CPP_PROG_LINK endif # WINNT && !GNU_CC endif # WINCE ifdef ENABLE_STRIP $(STRIP) $@ endif ifdef MOZ_POST_PROGRAM_COMMAND $(MOZ_POST_PROGRAM_COMMAND) $@ endif $(HOST_SIMPLE_PROGRAMS): host_%$(HOST_BIN_SUFFIX): host_%.$(OBJ_SUFFIX) $(HOST_LIBS_DEPS) $(HOST_EXTRA_DEPS) $(GLOBAL_DEPS) ifeq (WINCE,$(OS_ARCH)) $(HOST_LD) -NOLOGO -OUT:$@ $(WIN32_EXE_LDFLAGS) $< $(HOST_LIBS) $(HOST_EXTRA_LIBS) else ifeq (WINNT_,$(HOST_OS_ARCH)_$(GNU_CC)) $(HOST_LD) -NOLOGO -OUT:$@ -PDB:$(HOST_PDBFILE) $< $(WIN32_EXE_LDFLAGS) $(HOST_LIBS) $(HOST_EXTRA_LIBS) else ifneq (,$(HOST_CPPSRCS)$(USE_HOST_CXX)) $(HOST_CXX) $(HOST_OUTOPTION)$@ $(HOST_CXXFLAGS) $(INCLUDES) $< $(HOST_LIBS) $(HOST_EXTRA_LIBS) else $(HOST_CC) $(HOST_OUTOPTION)$@ $(HOST_CFLAGS) $(INCLUDES) $< $(HOST_LIBS) $(HOST_EXTRA_LIBS) endif endif endif # # Purify target. Solaris/sparc only to start. # Purify does not recognize "egcs" or "c++" so we go with # "gcc" and "g++" for now. # pure: $(PROGRAM) ifeq ($(CPP_PROG_LINK),1) $(PURIFY) $(CCC) -o $^.pure $(CXXFLAGS) $(PROGOBJS) $(LDFLAGS) $(LIBS_DIR) $(LIBS) $(OS_LIBS) $(EXTRA_LIBS) else $(PURIFY) $(CC) -o $^.pure $(CFLAGS) $(PROGOBJS) $(LDFLAGS) $(LIBS_DIR) $(LIBS) $(OS_LIBS) $(EXTRA_LIBS) endif ifndef NO_DIST_INSTALL $(INSTALL) $(IFLAGS2) $^.pure $(FINAL_TARGET) endif quantify: $(PROGRAM) ifeq ($(CPP_PROG_LINK),1) $(QUANTIFY) $(CCC) -o $^.quantify $(CXXFLAGS) $(PROGOBJS) $(LDFLAGS) $(LIBS_DIR) $(LIBS) $(OS_LIBS) $(EXTRA_LIBS) else $(QUANTIFY) $(CC) -o $^.quantify $(CFLAGS) $(PROGOBJS) $(LDFLAGS) $(LIBS_DIR) $(LIBS) $(OS_LIBS) $(EXTRA_LIBS) endif ifndef NO_DIST_INSTALL $(INSTALL) $(IFLAGS2) $^.quantify $(FINAL_TARGET) endif # # This allows us to create static versions of the shared libraries # that are built using other static libraries. Confused...? # ifdef SHARED_LIBRARY_LIBS ifeq (,$(GNU_LD)$(filter-out OS2 WINNT WINCE, $(OS_ARCH))) ifneq (,$(BUILD_STATIC_LIBS)$(FORCE_STATIC_LIB)) LOBJS += $(SHARED_LIBRARY_LIBS) endif else ifneq (,$(filter OSF1 BSD_OS FreeBSD NetBSD OpenBSD SunOS Darwin,$(OS_ARCH))) CLEANUP1 := | egrep -v '(________64ELEL_|__.SYMDEF)' CLEANUP2 := rm -f ________64ELEL_ __.SYMDEF else CLEANUP2 := true endif SUB_LOBJS = $(shell for lib in $(SHARED_LIBRARY_LIBS); do $(AR_LIST) $${lib} $(CLEANUP1); done;) endif endif ifdef MOZILLA_PROBE_LIBS PROBE_LOBJS = $(shell for lib in $(MOZILLA_PROBE_LIBS); do $(AR_LIST) $${lib} $(CLEANUP1); done;) endif ifdef DTRACE_PROBE_OBJ EXTRA_DEPS += $(DTRACE_PROBE_OBJ) endif $(LIBRARY): $(OBJS) $(LOBJS) $(SHARED_LIBRARY_LIBS) $(EXTRA_DEPS) $(GLOBAL_DEPS) rm -f $@ ifneq (,$(GNU_LD)$(filter-out OS2 WINNT WINCE, $(OS_ARCH))) ifdef SHARED_LIBRARY_LIBS @rm -f $(SUB_LOBJS) @for lib in $(SHARED_LIBRARY_LIBS); do $(AR_EXTRACT) $${lib}; $(CLEANUP2); done endif endif $(AR) $(AR_FLAGS) $(OBJS) $(LOBJS) $(SUB_LOBJS) $(RANLIB) $@ @rm -f foodummyfilefoo $(SUB_LOBJS) ifeq (,$(filter-out WINNT WINCE, $(OS_ARCH))) $(IMPORT_LIBRARY): $(SHARED_LIBRARY) endif ifeq ($(OS_ARCH),OS2) $(DEF_FILE): $(OBJS) $(SHARED_LIBRARY_LIBS) rm -f $@ echo LIBRARY $(SHARED_LIBRARY_NAME) INITINSTANCE TERMINSTANCE > $@ echo PROTMODE >> $@ echo CODE LOADONCALL MOVEABLE DISCARDABLE >> $@ echo DATA PRELOAD MOVEABLE MULTIPLE NONSHARED >> $@ echo EXPORTS >> $@ ifeq ($(IS_COMPONENT),1) ifeq ($(HAS_EXTRAEXPORTS),1) ifndef MOZ_OS2_USE_DECLSPEC $(FILTER) $(OBJS) $(SHARED_LIBRARY_LIBS) >> $@ endif else echo _NSGetModule >> $@ endif else ifndef MOZ_OS2_USE_DECLSPEC $(FILTER) $(OBJS) $(SHARED_LIBRARY_LIBS) >> $@ endif endif $(ADD_TO_DEF_FILE) ifdef MOZ_OS2_USE_DECLSPEC $(IMPORT_LIBRARY): $(SHARED_LIBRARY) else $(IMPORT_LIBRARY): $(DEF_FILE) endif rm -f $@ $(IMPLIB) $@ $^ $(RANLIB) $@ endif # OS/2 $(HOST_LIBRARY): $(HOST_OBJS) Makefile rm -f $@ $(HOST_AR) $(HOST_AR_FLAGS) $(HOST_OBJS) $(HOST_RANLIB) $@ ifdef NO_LD_ARCHIVE_FLAGS SUB_SHLOBJS = $(SUB_LOBJS) endif ifdef HAVE_DTRACE ifndef XP_MACOSX ifdef DTRACE_PROBE_OBJ ifndef DTRACE_LIB_DEPENDENT $(DTRACE_PROBE_OBJ): $(OBJS) dtrace -G -C -s $(MOZILLA_DTRACE_SRC) -o $(DTRACE_PROBE_OBJ) $(OBJS) endif endif endif endif # On Darwin (Mac OS X), dwarf2 debugging uses debug info left in .o files, # so instead of deleting .o files after repacking them into a dylib, we make # symlinks back to the originals. The symlinks are a no-op for stabs debugging, # so no need to conditionalize on OS version or debugging format. $(SHARED_LIBRARY): $(OBJS) $(LOBJS) $(DEF_FILE) $(RESFILE) $(SHARED_LIBRARY_LIBS) $(EXTRA_DEPS) $(DSO_LDOPTS_DEPS) $(GLOBAL_DEPS) ifndef INCREMENTAL_LINKER rm -f $@ endif ifeq ($(OS_ARCH),OpenVMS) @if test ! -f $(VMS_SYMVEC_FILE); then \ if test -f $(VMS_SYMVEC_FILE_MODULE); then \ echo Creating specific component options file $(VMS_SYMVEC_FILE); \ cp $(VMS_SYMVEC_FILE_MODULE) $(VMS_SYMVEC_FILE); \ fi; \ fi ifdef IS_COMPONENT @if test ! -f $(VMS_SYMVEC_FILE); then \ echo Creating generic component options file $(VMS_SYMVEC_FILE); \ cp $(VMS_SYMVEC_FILE_COMP) $(VMS_SYMVEC_FILE); \ fi endif endif # OpenVMS ifdef NO_LD_ARCHIVE_FLAGS ifdef SHARED_LIBRARY_LIBS @rm -f $(SUB_SHLOBJS) @for lib in $(SHARED_LIBRARY_LIBS); do $(AR_EXTRACT) $${lib}; $(CLEANUP2); done ifeq ($(OS_ARCH),Darwin) @echo Making symlinks to the original object files in the archive libraries $(SHARED_LIBRARY_LIBS) @for lib in $(SHARED_LIBRARY_LIBS); do \ libdir=`echo $$lib|sed -e 's,/[^/]*\.a,,'`; \ ofiles=`$(AR_LIST) $${lib}`; \ for ofile in $$ofiles; do \ if [ -f $$libdir/$$ofile ]; then \ rm -f $$ofile; \ ln -s $$libdir/$$ofile $$ofile; \ fi; \ done; \ done endif endif # SHARED_LIBRARY_LIBS endif # NO_LD_ARCHIVE_FLAGS ifdef DTRACE_LIB_DEPENDENT @rm -f $(PROBE_LOBJS) @for lib in $(MOZILLA_PROBE_LIBS); do $(AR_EXTRACT) $${lib}; $(CLEANUP2); done ifndef XP_MACOSX dtrace -G -C -s $(MOZILLA_DTRACE_SRC) -o $(DTRACE_PROBE_OBJ) $(PROBE_LOBJS) endif @for lib in $(MOZILLA_PROBE_LIBS); do \ ofiles=`$(AR_LIST) $${lib}`; \ $(AR_DELETE) $${lib} $$ofiles; \ done $(MKSHLIB) $(SHLIB_LDSTARTFILE) $(OBJS) $(LOBJS) $(SUB_SHLOBJS) $(DTRACE_PROBE_OBJ) $(PROBE_LOBJS) $(RESFILE) $(LDFLAGS) $(EXTRA_DSO_LDOPTS) $(OS_LIBS) $(EXTRA_LIBS) $(DEF_FILE) $(SHLIB_LDENDFILE) @rm -f $(PROBE_LOBJS) @rm -f $(DTRACE_PROBE_OBJ) @for lib in $(MOZILLA_PROBE_LIBS); do \ if [ -L $${lib} ]; then rm -f `readlink $${lib}`; fi; \ done @rm -f $(MOZILLA_PROBE_LIBS) else # ! DTRACE_LIB_DEPENDENT $(MKSHLIB) $(SHLIB_LDSTARTFILE) $(OBJS) $(DTRACE_PROBE_OBJ) $(LOBJS) $(SUB_SHLOBJS) $(RESFILE) $(LDFLAGS) $(EXTRA_DSO_LDOPTS) $(OS_LIBS) $(EXTRA_LIBS) $(DEF_FILE) $(SHLIB_LDENDFILE) endif # DTRACE_LIB_DEPENDENT ifeq (_WINNT,$(GNU_CC)_$(OS_ARCH)) ifdef MSMANIFEST_TOOL ifdef EMBED_MANIFEST_AT @if test -f $@.manifest; then \ mt.exe -NOLOGO -MANIFEST $@.manifest -OUTPUTRESOURCE:$@\;$(EMBED_MANIFEST_AT); \ rm -f $@.manifest; \ fi endif # EMBED_MANIFEST_AT endif # MSVC with manifest tool ifdef MOZ_PROFILE_GENERATE touch -t `date +%Y%m%d%H%M.%S -d "now+5seconds"` pgo.relink endif endif # WINNT && !GCC ifneq ($(OS_ARCH),Darwin) @rm -f $(SUB_SHLOBJS) endif # Darwin @rm -f foodummyfilefoo $(DELETE_AFTER_LINK) chmod +x $@ ifdef ENABLE_STRIP $(STRIP) $@ endif ifdef MOZ_POST_DSO_LIB_COMMAND $(MOZ_POST_DSO_LIB_COMMAND) $@ endif ifdef MOZ_AUTO_DEPS ifdef COMPILER_DEPEND ifeq ($(SOLARIS_SUNPRO_CC),1) _MDDEPFILE = $(MDDEPDIR)/$(@F).pp define MAKE_DEPS_AUTO_CC if test -d $(@D); then \ echo "Building deps for $< using Sun Studio cc"; \ $(CC) $(COMPILE_CFLAGS) -xM $< >$(_MDDEPFILE) ; \ fi endef define MAKE_DEPS_AUTO_CXX if test -d $(@D); then \ echo "Building deps for $< using Sun Studio CC"; \ $(CXX) $(COMPILE_CXXFLAGS) -xM $< >$(_MDDEPFILE) ; \ fi endef endif # Sun Studio on Solaris else # COMPILER_DEPEND # # Generate dependencies on the fly # _MDDEPFILE = $(MDDEPDIR)/$(@F).pp define MAKE_DEPS_AUTO if test -d $(@D); then \ echo "Building deps for $<"; \ $(MKDEPEND) -o'.$(OBJ_SUFFIX)' -f- $(DEFINES) $(ACDEFINES) $(INCLUDES) $< 2>/dev/null | sed -e "s|^[^ ]*/||" > $(_MDDEPFILE) ; \ fi endef MAKE_DEPS_AUTO_CC = $(MAKE_DEPS_AUTO) MAKE_DEPS_AUTO_CXX = $(MAKE_DEPS_AUTO) endif # COMPILER_DEPEND endif # MOZ_AUTO_DEPS ifdef MOZ_MEMORY ifeq ($(OS_ARCH),SunOS) SOLARIS_JEMALLOC_LDFLAGS = $(call EXPAND_LIBNAME_PATH,jemalloc,$(DIST)/lib) endif endif # Rules for building native targets must come first because of the host_ prefix host_%.$(OBJ_SUFFIX): %.c $(GLOBAL_DEPS) $(REPORT_BUILD) $(ELOG) $(HOST_CC) $(HOST_OUTOPTION)$@ -c $(HOST_CFLAGS) $(INCLUDES) $(NSPR_CFLAGS) $(_VPATH_SRCS) host_%.$(OBJ_SUFFIX): %.cpp $(GLOBAL_DEPS) $(REPORT_BUILD) $(ELOG) $(HOST_CXX) $(HOST_OUTOPTION)$@ -c $(HOST_CXXFLAGS) $(INCLUDES) $(NSPR_CFLAGS) $(_VPATH_SRCS) host_%.$(OBJ_SUFFIX): %.cc $(GLOBAL_DEPS) $(REPORT_BUILD) $(ELOG) $(HOST_CXX) $(HOST_OUTOPTION)$@ -c $(HOST_CXXFLAGS) $(INCLUDES) $(NSPR_CFLAGS) $(_VPATH_SRCS) host_%.$(OBJ_SUFFIX): %.m $(GLOBAL_DEPS) $(REPORT_BUILD) $(ELOG) $(HOST_CC) $(HOST_OUTOPTION)$@ -c $(HOST_CFLAGS) $(HOST_CMFLAGS) $(INCLUDES) $(NSPR_CFLAGS) $(_VPATH_SRCS) host_%.$(OBJ_SUFFIX): %.mm $(GLOBAL_DEPS) $(REPORT_BUILD) $(ELOG) $(HOST_CXX) $(HOST_OUTOPTION)$@ -c $(HOST_CXXFLAGS) $(HOST_CMMFLAGS) $(INCLUDES) $(NSPR_CFLAGS) $(_VPATH_SRCS) %:: %.c $(GLOBAL_DEPS) $(REPORT_BUILD) @$(MAKE_DEPS_AUTO_CC) $(ELOG) $(CC) $(CFLAGS) $(LDFLAGS) $(OUTOPTION)$@ $(_VPATH_SRCS) %.$(OBJ_SUFFIX): %.c $(GLOBAL_DEPS) $(REPORT_BUILD) @$(MAKE_DEPS_AUTO_CC) $(ELOG) $(CC) $(OUTOPTION)$@ -c $(COMPILE_CFLAGS) $(_VPATH_SRCS) moc_%.cpp: %.h $(GLOBAL_DEPS) $(MOC) $< $(OUTOPTION)$@ moc_%.cc: %.cc $(GLOBAL_DEPS) $(REPORT_BUILD) $(ELOG) $(MOC) $(_VPATH_SRCS:.cc=.h) $(OUTOPTION)$@ ifdef ASFILES # The AS_DASH_C_FLAG is needed cause not all assemblers (Solaris) accept # a '-c' flag. %.$(OBJ_SUFFIX): %.$(ASM_SUFFIX) $(GLOBAL_DEPS) $(AS) -o $@ $(ASFLAGS) $(AS_DASH_C_FLAG) $(_VPATH_SRCS) endif %.$(OBJ_SUFFIX): %.S $(GLOBAL_DEPS) $(AS) -o $@ $(ASFLAGS) -c $< %:: %.cpp $(GLOBAL_DEPS) @$(MAKE_DEPS_AUTO_CXX) $(CCC) $(OUTOPTION)$@ $(CXXFLAGS) $(_VPATH_SRCS) $(LDFLAGS) # # Please keep the next two rules in sync. # %.$(OBJ_SUFFIX): %.cc $(GLOBAL_DEPS) $(REPORT_BUILD) @$(MAKE_DEPS_AUTO_CXX) $(ELOG) $(CCC) $(OUTOPTION)$@ -c $(COMPILE_CXXFLAGS) $(_VPATH_SRCS) %.$(OBJ_SUFFIX): %.cpp $(GLOBAL_DEPS) $(REPORT_BUILD) @$(MAKE_DEPS_AUTO_CXX) ifdef STRICT_CPLUSPLUS_SUFFIX echo "#line 1 \"$*.cpp\"" | cat - $*.cpp > t_$*.cc $(ELOG) $(CCC) -o $@ -c $(COMPILE_CXXFLAGS) t_$*.cc rm -f t_$*.cc else $(ELOG) $(CCC) $(OUTOPTION)$@ -c $(COMPILE_CXXFLAGS) $(_VPATH_SRCS) endif #STRICT_CPLUSPLUS_SUFFIX $(OBJ_PREFIX)%.$(OBJ_SUFFIX): %.mm $(GLOBAL_DEPS) $(REPORT_BUILD) @$(MAKE_DEPS_AUTO_CXX) $(ELOG) $(CCC) -o $@ -c $(COMPILE_CXXFLAGS) $(COMPILE_CMMFLAGS) $(_VPATH_SRCS) $(OBJ_PREFIX)%.$(OBJ_SUFFIX): %.m $(GLOBAL_DEPS) $(REPORT_BUILD) @$(MAKE_DEPS_AUTO_CC) $(ELOG) $(CC) -o $@ -c $(COMPILE_CFLAGS) $(COMPILE_CMFLAGS) $(_VPATH_SRCS) %.s: %.cpp $(CCC) -S $(COMPILE_CXXFLAGS) $(_VPATH_SRCS) %.s: %.cc $(CCC) -S $(COMPILE_CXXFLAGS) $(_VPATH_SRCS) %.s: %.c $(CC) -S $(COMPILE_CFLAGS) $(_VPATH_SRCS) %.i: %.cpp $(CCC) -C -E $(COMPILE_CXXFLAGS) $(_VPATH_SRCS) > $*.i %.i: %.cc $(CCC) -C -E $(COMPILE_CXXFLAGS) $(_VPATH_SRCS) > $*.i %.i: %.c $(CC) -C -E $(COMPILE_CFLAGS) $(_VPATH_SRCS) > $*.i %.i: %.mm $(CCC) -C -E $(COMPILE_CXXFLAGS) $(COMPILE_CMMFLAGS) $(_VPATH_SRCS) > $*.i %.res: %.rc @echo Creating Resource file: $@ ifeq ($(OS_ARCH),OS2) $(RC) $(RCFLAGS:-D%=-d %) -i $(subst /,\,$(srcdir)) -r $< $@ else ifdef GNU_CC $(RC) $(RCFLAGS) $(filter-out -U%,$(DEFINES)) $(INCLUDES:-I%=--include-dir %) $(OUTOPTION)$@ $(_VPATH_SRCS) else $(RC) $(RCFLAGS) -r $(DEFINES) $(INCLUDES) $(OUTOPTION)$@ $(_VPATH_SRCS) endif endif # need 3 separate lines for OS/2 %:: %.pl rm -f $@ cp $< $@ chmod +x $@ %:: %.sh rm -f $@; cp $< $@; chmod +x $@ # Cancel these implicit rules # %: %,v %: RCS/%,v %: s.% %: SCCS/s.% ############################################################################### # Java rules ############################################################################### ifneq (,$(filter OS2 WINNT WINCE,$(OS_ARCH))) SEP := ; else SEP := : endif EMPTY := SPACE := $(EMPTY) $(EMPTY) # Cygwin and MSYS have their own special path form, but javac expects the source # and class paths to be in the DOS form (i.e. e:/builds/...). This function # does the appropriate conversion on Windows, but is a noop on other systems. ifeq (,$(filter-out WINNT WINCE, $(HOST_OS_ARCH))) ifdef CYGWIN_WRAPPER normalizepath = $(foreach p,$(1),$(shell cygpath -m $(p))) else # assume MSYS # We use 'pwd -W' to get DOS form of the path. However, since the given path # could be a file or a non-existent path, we cannot call 'pwd -W' directly # on the path. Instead, we extract the root path (i.e. "c:/"), call 'pwd -W' # on it, then merge with the rest of the path. root-path = $(shell echo $(1) | sed -e "s|\(/[^/]*\)/\?\(.*\)|\1|") non-root-path = $(shell echo $(1) | sed -e "s|\(/[^/]*\)/\?\(.*\)|\2|") normalizepath = $(foreach p,$(1),$(if $(filter /%,$(1)),$(patsubst %/,%,$(shell cd $(call root-path,$(1)) && pwd -W))/$(call non-root-path,$(1)),$(1))) endif else normalizepath = $(1) endif _srcdir = $(call normalizepath,$(srcdir)) ifdef JAVA_SOURCEPATH SP = $(subst $(SPACE),$(SEP),$(call normalizepath,$(strip $(JAVA_SOURCEPATH)))) _JAVA_SOURCEPATH = ".$(SEP)$(_srcdir)$(SEP)$(SP)" else _JAVA_SOURCEPATH = ".$(SEP)$(_srcdir)" endif ifdef JAVA_CLASSPATH CP = $(subst $(SPACE),$(SEP),$(call normalizepath,$(strip $(JAVA_CLASSPATH)))) _JAVA_CLASSPATH = ".$(SEP)$(CP)" else _JAVA_CLASSPATH = . endif _JAVA_DIR = _java $(_JAVA_DIR):: $(NSINSTALL) -D $@ $(_JAVA_DIR)/%.class: %.java $(GLOBAL_DEPS) $(_JAVA_DIR) $(CYGWIN_WRAPPER) $(JAVAC) $(JAVAC_FLAGS) -classpath $(_JAVA_CLASSPATH) \ -sourcepath $(_JAVA_SOURCEPATH) -d $(_JAVA_DIR) $(_VPATH_SRCS) $(JAVA_LIBRARY): $(addprefix $(_JAVA_DIR)/,$(JAVA_SRCS:.java=.class)) $(GLOBAL_DEPS) $(JAR) cf $@ -C $(_JAVA_DIR) . GARBAGE_DIRS += $(_JAVA_DIR) ############################################################################### # Update Makefiles ############################################################################### # In GNU make 3.80, makefiles must use the /cygdrive syntax, even if we're # processing them with AS perl. See bug 232003 ifdef AS_PERL CYGWIN_TOPSRCDIR = -nowrap -p $(topsrcdir) -wrap endif # Note: Passing depth to make-makefile is optional. # It saves the script some work, though. Makefile: Makefile.in @$(PERL) $(AUTOCONF_TOOLS)/make-makefile -t $(topsrcdir) -d $(DEPTH) $(CYGWIN_TOPSRCDIR) ifdef SUBMAKEFILES # VPATH does not work on some machines in this case, so add $(srcdir) $(SUBMAKEFILES): % : $(srcdir)/%.in $(PERL) $(AUTOCONF_TOOLS)/make-makefile -t $(topsrcdir) -d $(DEPTH) $(CYGWIN_TOPSRCDIR) $@ endif ifdef AUTOUPDATE_CONFIGURE $(topsrcdir)/configure: $(topsrcdir)/configure.in (cd $(topsrcdir) && $(AUTOCONF)) && (cd $(DEPTH) && ./config.status --recheck) endif ############################################################################### # Bunch of things that extend the 'export' rule (in order): ############################################################################### ################################################################################ # Copy each element of EXPORTS to $(DIST)/include ifdef MOZ_JAVAXPCOM ifneq ($(XPIDLSRCS),) $(JAVA_DIST_DIR):: $(NSINSTALL) -D $@ endif endif ifneq ($(XPI_NAME),) $(FINAL_TARGET): $(NSINSTALL) -D $@ export:: $(FINAL_TARGET) endif ifndef NO_DIST_INSTALL ifneq (,$(EXPORTS)) export:: $(EXPORTS) $(INSTALL) $(IFLAGS1) $^ $(DIST)/include endif endif # NO_DIST_INSTALL define EXPORT_NAMESPACE_RULE ifndef NO_DIST_INSTALL export:: $(EXPORTS_$(namespace)) $(INSTALL) $(IFLAGS1) $$^ $(DIST)/include/$(namespace) endif # NO_DIST_INSTALL endef $(foreach namespace,$(EXPORTS_NAMESPACES),$(eval $(EXPORT_NAMESPACE_RULE))) ################################################################################ # Copy each element of PREF_JS_EXPORTS ifdef GRE_MODULE PREF_DIR = greprefs else ifneq (,$(XPI_NAME)$(LIBXUL_SDK)) PREF_DIR = defaults/preferences else PREF_DIR = defaults/pref endif endif ifneq ($(PREF_JS_EXPORTS),) # on win32, pref files need CRLF line endings... see bug 206029 ifeq (WINNT,$(OS_ARCH)) PREF_PPFLAGS = --line-endings=crlf endif ifndef NO_DIST_INSTALL $(FINAL_TARGET)/$(PREF_DIR): $(NSINSTALL) -D $@ libs:: $(FINAL_TARGET)/$(PREF_DIR) $(PREF_JS_EXPORTS) $(EXIT_ON_ERROR) \ for i in $(PREF_JS_EXPORTS); do \ dest=$(FINAL_TARGET)/$(PREF_DIR)/`basename $$i`; \ $(RM) -f $$dest; \ $(PYTHON) $(topsrcdir)/config/Preprocessor.py $(PREF_PPFLAGS) $(DEFINES) $(ACDEFINES) $(XULPPFLAGS) $$i > $$dest; \ done endif endif ################################################################################ # Copy each element of AUTOCFG_JS_EXPORTS to $(FINAL_TARGET)/defaults/autoconfig ifneq ($(AUTOCFG_JS_EXPORTS),) $(FINAL_TARGET)/defaults/autoconfig:: $(NSINSTALL) -D $@ ifndef NO_DIST_INSTALL export:: $(AUTOCFG_JS_EXPORTS) $(FINAL_TARGET)/defaults/autoconfig $(INSTALL) $(IFLAGS1) $^ endif endif ################################################################################ # Export the elements of $(XPIDLSRCS) # generating .h and .xpt files and moving them to the appropriate places. ifneq ($(XPIDLSRCS),) export:: $(patsubst %.idl,$(XPIDL_GEN_DIR)/%.h, $(XPIDLSRCS)) ifndef XPIDL_MODULE XPIDL_MODULE = $(MODULE) endif ifeq ($(XPIDL_MODULE),) # we need $(XPIDL_MODULE) to make $(XPIDL_MODULE).xpt export:: FORCE @echo @echo "*** Error processing XPIDLSRCS:" @echo "Please define MODULE or XPIDL_MODULE when defining XPIDLSRCS," @echo "so we have a module name to use when creating MODULE.xpt." @echo; sleep 2; false endif $(IDL_DIR):: $(NSINSTALL) -D $@ # generate .h files from into $(XPIDL_GEN_DIR), then export to $(DIST)/include; # warn against overriding existing .h file. $(XPIDL_GEN_DIR)/.done: @if test ! -d $(XPIDL_GEN_DIR); then echo Creating $(XPIDL_GEN_DIR)/.done; rm -rf $(XPIDL_GEN_DIR); mkdir $(XPIDL_GEN_DIR); fi @touch $@ # don't depend on $(XPIDL_GEN_DIR), because the modification date changes # with any addition to the directory, regenerating all .h files -> everything. $(XPIDL_GEN_DIR)/%.h: %.idl $(XPIDL_COMPILE) $(XPIDL_GEN_DIR)/.done $(REPORT_BUILD) $(ELOG) $(XPIDL_COMPILE) -m header -w $(XPIDL_FLAGS) -o $(XPIDL_GEN_DIR)/$* $(_VPATH_SRCS) @if test -n "$(findstring $*.h, $(EXPORTS))"; \ then echo "*** WARNING: file $*.h generated from $*.idl overrides $(srcdir)/$*.h"; else true; fi ifndef NO_GEN_XPT # generate intermediate .xpt files into $(XPIDL_GEN_DIR), then link # into $(XPIDL_MODULE).xpt and export it to $(FINAL_TARGET)/components. $(XPIDL_GEN_DIR)/%.xpt: %.idl $(XPIDL_COMPILE) $(XPIDL_GEN_DIR)/.done $(REPORT_BUILD) $(ELOG) $(XPIDL_COMPILE) -m typelib -w $(XPIDL_FLAGS) -e $@ -d $(MDDEPDIR)/$*.pp $(_VPATH_SRCS) # no need to link together if XPIDLSRCS contains only XPIDL_MODULE ifneq ($(XPIDL_MODULE).idl,$(strip $(XPIDLSRCS))) $(XPIDL_GEN_DIR)/$(XPIDL_MODULE).xpt: $(patsubst %.idl,$(XPIDL_GEN_DIR)/%.xpt,$(XPIDLSRCS)) $(GLOBAL_DEPS) $(XPIDL_LINK) $(XPIDL_LINK) $(XPIDL_GEN_DIR)/$(XPIDL_MODULE).xpt $(patsubst %.idl,$(XPIDL_GEN_DIR)/%.xpt,$(XPIDLSRCS)) endif # XPIDL_MODULE.xpt != XPIDLSRCS libs:: $(XPIDL_GEN_DIR)/$(XPIDL_MODULE).xpt ifndef NO_DIST_INSTALL $(INSTALL) $(IFLAGS1) $(XPIDL_GEN_DIR)/$(XPIDL_MODULE).xpt $(FINAL_TARGET)/components endif endif # NO_GEN_XPT GARBAGE_DIRS += $(XPIDL_GEN_DIR) endif # XPIDLSRCS ifneq ($(XPIDLSRCS),) # export .idl files to $(IDL_DIR) ifndef NO_DIST_INSTALL export:: $(XPIDLSRCS) $(IDL_DIR) $(INSTALL) $(IFLAGS1) $^ export:: $(patsubst %.idl,$(XPIDL_GEN_DIR)/%.h, $(XPIDLSRCS)) $(DIST)/include $(INSTALL) $(IFLAGS1) $^ endif # NO_DIST_INSTALL endif # XPIDLSRCS # # General rules for exporting idl files. # # WORK-AROUND ONLY, for mozilla/tools/module-deps/bootstrap.pl build. # Bug to fix idl dependency problems w/o this extra build pass is # http://bugzilla.mozilla.org/show_bug.cgi?id=145777 # $(IDL_DIR):: $(NSINSTALL) -D $@ export-idl:: $(SUBMAKEFILES) $(MAKE_DIRS) ifneq ($(XPIDLSRCS),) ifndef NO_DIST_INSTALL export-idl:: $(XPIDLSRCS) $(IDL_DIR) $(INSTALL) $(IFLAGS1) $^ endif endif $(LOOP_OVER_PARALLEL_DIRS) $(LOOP_OVER_DIRS) $(LOOP_OVER_TOOL_DIRS) ifdef MOZ_JAVAXPCOM ifneq ($(XPIDLSRCS),) JAVA_XPIDLSRCS = $(XPIDLSRCS) # A single IDL file can contain multiple interfaces, which result in multiple # Java interface files. So use hidden dependency files. JAVADEPFILES = $(addprefix $(JAVA_GEN_DIR)/.,$(JAVA_XPIDLSRCS:.idl=.java.pp)) $(JAVA_GEN_DIR): $(NSINSTALL) -D $@ GARBAGE_DIRS += $(JAVA_GEN_DIR) # generate .java files into _javagen/[package name dirs] _JAVA_GEN_DIR = $(JAVA_GEN_DIR)/$(JAVA_IFACES_PKG_NAME) $(_JAVA_GEN_DIR): $(NSINSTALL) -D $@ $(JAVA_GEN_DIR)/.%.java.pp: %.idl $(XPIDL_COMPILE) $(_JAVA_GEN_DIR) $(REPORT_BUILD) $(ELOG) $(XPIDL_COMPILE) -m java -w $(XPIDL_FLAGS) -I$(srcdir) -I$(IDL_DIR) -o $(_JAVA_GEN_DIR)/$* $(_VPATH_SRCS) @touch $@ # "Install" generated Java interfaces. We segregate them based on the XPI_NAME. # If XPI_NAME is not set, install into the "default" directory. ifneq ($(XPI_NAME),) JAVA_INSTALL_DIR = $(JAVA_DIST_DIR)/$(XPI_NAME) else JAVA_INSTALL_DIR = $(JAVA_DIST_DIR)/default endif $(JAVA_INSTALL_DIR): $(NSINSTALL) -D $@ export:: $(JAVA_DIST_DIR) $(JAVADEPFILES) $(JAVA_INSTALL_DIR) (cd $(JAVA_GEN_DIR) && tar $(TAR_CREATE_FLAGS) - .) | (cd $(JAVA_INSTALL_DIR) && tar -xf -) endif # XPIDLSRCS endif # MOZ_JAVAXPCOM ################################################################################ # Copy each element of EXTRA_COMPONENTS to $(FINAL_TARGET)/components ifdef EXTRA_COMPONENTS libs:: $(EXTRA_COMPONENTS) ifndef NO_DIST_INSTALL $(INSTALL) $(IFLAGS1) $^ $(FINAL_TARGET)/components @$(PYTHON) $(MOZILLA_DIR)/config/buildlist.py $(FINAL_TARGET)/components/components.list $(notdir $^) endif endif ifdef EXTRA_PP_COMPONENTS libs:: $(EXTRA_PP_COMPONENTS) ifndef NO_DIST_INSTALL $(EXIT_ON_ERROR) \ $(NSINSTALL) -D $(FINAL_TARGET)/components; \ for i in $^; do \ fname=`basename $$i`; \ dest=$(FINAL_TARGET)/components/$${fname}; \ $(RM) -f $$dest; \ $(PYTHON) $(topsrcdir)/config/Preprocessor.py $(DEFINES) $(ACDEFINES) $(XULPPFLAGS) $$i > $$dest; \ $(PYTHON) $(MOZILLA_DIR)/config/buildlist.py $(FINAL_TARGET)/components/components.list $$fname; \ done endif endif ################################################################################ # Copy each element of EXTRA_JS_MODULES to $(FINAL_TARGET)/modules ifdef EXTRA_JS_MODULES libs:: $(EXTRA_JS_MODULES) ifndef NO_DIST_INSTALL $(INSTALL) $(IFLAGS1) $^ $(FINAL_TARGET)/modules endif endif ifdef EXTRA_PP_JS_MODULES libs:: $(EXTRA_PP_JS_MODULES) ifndef NO_DIST_INSTALL $(EXIT_ON_ERROR) \ $(NSINSTALL) -D $(FINAL_TARGET)/modules; \ for i in $^; do \ dest=$(FINAL_TARGET)/modules/`basename $$i`; \ $(RM) -f $$dest; \ $(PYTHON) $(topsrcdir)/config/Preprocessor.py $(DEFINES) $(ACDEFINES) $(XULPPFLAGS) $$i > $$dest; \ done endif endif ################################################################################ # SDK ifneq (,$(SDK_LIBRARY)) $(SDK_LIB_DIR):: $(NSINSTALL) -D $@ ifndef NO_DIST_INSTALL libs:: $(SDK_LIBRARY) $(SDK_LIB_DIR) $(INSTALL) $(IFLAGS2) $^ endif endif # SDK_LIBRARY ifneq (,$(SDK_BINARY)) $(SDK_BIN_DIR):: $(NSINSTALL) -D $@ ifndef NO_DIST_INSTALL libs:: $(SDK_BINARY) $(SDK_BIN_DIR) $(INSTALL) $(IFLAGS2) $^ endif endif # SDK_BINARY ################################################################################ # CHROME PACKAGING JAR_MANIFEST := $(srcdir)/jar.mn chrome:: $(MAKE) realchrome $(LOOP_OVER_PARALLEL_DIRS) $(LOOP_OVER_DIRS) $(LOOP_OVER_TOOL_DIRS) $(FINAL_TARGET)/chrome: $(NSINSTALL) -D $@ ifneq (,$(wildcard $(JAR_MANIFEST))) ifndef NO_DIST_INSTALL libs realchrome:: $(CHROME_DEPS) $(FINAL_TARGET)/chrome $(PYTHON) $(MOZILLA_DIR)/config/JarMaker.py \ $(QUIET) -j $(FINAL_TARGET)/chrome \ $(MAKE_JARS_FLAGS) $(XULPPFLAGS) $(DEFINES) $(ACDEFINES) \ $(JAR_MANIFEST) endif endif ifneq ($(DIST_FILES),) $(DIST)/bin: $(NSINSTALL) -D $@ libs:: $(DIST_FILES) $(DIST)/bin @$(EXIT_ON_ERROR) \ for f in $(DIST_FILES); do \ dest=$(FINAL_TARGET)/`basename $$f`; \ $(RM) -f $$dest; \ $(PYTHON) $(MOZILLA_DIR)/config/Preprocessor.py \ $(XULAPP_DEFINES) $(DEFINES) $(ACDEFINES) $(XULPPFLAGS) \ $(srcdir)/$$f > $$dest; \ done endif ifneq ($(DIST_CHROME_FILES),) libs:: $(DIST_CHROME_FILES) @$(EXIT_ON_ERROR) \ for f in $(DIST_CHROME_FILES); do \ dest=$(FINAL_TARGET)/chrome/`basename $$f`; \ $(RM) -f $$dest; \ $(PYTHON) $(MOZILLA_DIR)/config/Preprocessor.py \ $(XULAPP_DEFINES) $(DEFINES) $(ACDEFINES) $(XULPPFLAGS) \ $(srcdir)/$$f > $$dest; \ done endif ifneq ($(XPI_PKGNAME),) libs realchrome:: ifdef STRIP_XPI ifndef MOZ_DEBUG @echo "Stripping $(XPI_PKGNAME) package directory..." @echo $(FINAL_TARGET) @cd $(FINAL_TARGET) && find . ! -type d \ ! -name "*.js" \ ! -name "*.xpt" \ ! -name "*.gif" \ ! -name "*.jpg" \ ! -name "*.png" \ ! -name "*.xpm" \ ! -name "*.txt" \ ! -name "*.rdf" \ ! -name "*.sh" \ ! -name "*.properties" \ ! -name "*.dtd" \ ! -name "*.html" \ ! -name "*.xul" \ ! -name "*.css" \ ! -name "*.xml" \ ! -name "*.jar" \ ! -name "*.dat" \ ! -name "*.tbl" \ ! -name "*.src" \ ! -name "*.reg" \ $(PLATFORM_EXCLUDE_LIST) \ -exec $(STRIP) $(STRIP_FLAGS) {} >/dev/null 2>&1 \; endif endif @echo "Packaging $(XPI_PKGNAME).xpi..." cd $(FINAL_TARGET) && $(ZIP) -qr ../$(XPI_PKGNAME).xpi * endif ifdef INSTALL_EXTENSION_ID ifndef XPI_NAME $(error XPI_NAME must be set for INSTALL_EXTENSION_ID) endif libs:: $(RM) -rf "$(DIST)/bin/extensions/$(INSTALL_EXTENSION_ID)" $(NSINSTALL) -D "$(DIST)/bin/extensions/$(INSTALL_EXTENSION_ID)" cd $(FINAL_TARGET) && tar $(TAR_CREATE_FLAGS) - . | (cd "../../bin/extensions/$(INSTALL_EXTENSION_ID)" && tar -xf -) endif ifneq (,$(filter flat symlink,$(MOZ_CHROME_FILE_FORMAT))) _JAR_REGCHROME_DISABLE_JAR=1 else _JAR_REGCHROME_DISABLE_JAR=0 endif REGCHROME = $(PERL) -I$(MOZILLA_DIR)/config $(MOZILLA_DIR)/config/add-chrome.pl \ $(if $(filter gtk2,$(MOZ_WIDGET_TOOLKIT)),-x) \ $(if $(CROSS_COMPILE),-o $(OS_ARCH)) $(FINAL_TARGET)/chrome/installed-chrome.txt \ $(_JAR_REGCHROME_DISABLE_JAR) REGCHROME_INSTALL = $(PERL) -I$(MOZILLA_DIR)/config $(MOZILLA_DIR)/config/add-chrome.pl \ $(if $(filter gtk2,$(MOZ_WIDGET_TOOLKIT)),-x) \ $(if $(CROSS_COMPILE),-o $(OS_ARCH)) $(DESTDIR)$(mozappdir)/chrome/installed-chrome.txt \ $(_JAR_REGCHROME_DISABLE_JAR) ############################################################################# # Dependency system ############################################################################# ifdef COMPILER_DEPEND depend:: @echo "$(MAKE): No need to run depend target.\ Using compiler-based depend." 1>&2 ifeq ($(GNU_CC)$(GNU_CXX),) # Non-GNU compilers @echo "`echo '$(MAKE):'|sed 's/./ /g'`"\ '(Compiler-based depend was turned on by "--enable-md".)' 1>&2 else # GNU compilers @space="`echo '$(MAKE): '|sed 's/./ /g'`";\ echo "$$space"'Since you are using a GNU compiler,\ it is on by default.' 1>&2; \ echo "$$space"'To turn it off, pass --disable-md to configure.' 1>&2 endif else # ! COMPILER_DEPEND ifndef MOZ_AUTO_DEPS define MAKE_DEPS_NOAUTO $(MKDEPEND) -w1024 -o'.$(OBJ_SUFFIX)' -f- $(DEFINES) $(ACDEFINES) $(INCLUDES) $< 2>/dev/null | sed -e "s|^[^ ]*/||" > $@ endef $(MDDEPDIR)/%.pp: %.c $(REPORT_BUILD) @$(MAKE_DEPS_NOAUTO) $(MDDEPDIR)/%.pp: %.cpp $(REPORT_BUILD) @$(MAKE_DEPS_NOAUTO) $(MDDEPDIR)/%.pp: %.s $(REPORT_BUILD) @$(MAKE_DEPS_NOAUTO) ifneq (,$(OBJS)$(XPIDLSRCS)$(SIMPLE_PROGRAMS)) depend:: $(SUBMAKEFILES) $(MAKE_DIRS) $(MDDEPFILES) else depend:: $(SUBMAKEFILES) endif $(LOOP_OVER_PARALLEL_DIRS) $(LOOP_OVER_DIRS) $(LOOP_OVER_TOOL_DIRS) dependclean:: $(SUBMAKEFILES) rm -f $(MDDEPFILES) $(LOOP_OVER_PARALLEL_DIRS) $(LOOP_OVER_DIRS) $(LOOP_OVER_TOOL_DIRS) endif # MOZ_AUTO_DEPS endif # COMPILER_DEPEND ############################################################################# # MDDEPDIR is the subdirectory where all the dependency files are placed. # This uses a make rule (instead of a macro) to support parallel # builds (-jN). If this were done in the LOOP_OVER_DIRS macro, two # processes could simultaneously try to create the same directory. # # We use $(CURDIR) in the rule's target to ensure that we don't find # a dependency directory in the source tree via VPATH (perhaps from # a previous build in the source tree) and thus neglect to create a # dependency directory in the object directory, where we really need # it. $(CURDIR)/$(MDDEPDIR): @if test ! -d $@; then echo Creating $@; rm -rf $@; mkdir $@; else true; fi ifneq (,$(filter-out all chrome default export realchrome tools clean clobber clobber_all distclean realclean,$(MAKECMDGOALS))) ifneq (,$(OBJS)$(XPIDLSRCS)$(SIMPLE_PROGRAMS)) MDDEPEND_FILES := $(strip $(wildcard $(MDDEPDIR)/*.pp)) ifneq (,$(MDDEPEND_FILES)) # The script mddepend.pl checks the dependencies and writes to stdout # one rule to force out-of-date objects. For example, # foo.o boo.o: FORCE # The script has an advantage over including the *.pp files directly # because it handles the case when header files are removed from the build. # 'make' would complain that there is no way to build missing headers. ALL_PP_RESULTS = $(shell $(PERL) $(BUILD_TOOLS)/mddepend.pl - $(MDDEPEND_FILES)) $(eval $(ALL_PP_RESULTS)) endif endif endif ############################################################################# -include $(topsrcdir)/$(MOZ_BUILD_APP)/app-rules.mk -include $(MY_RULES) # # Generate Emacs tags in a file named TAGS if ETAGS was set in $(MY_CONFIG) # or in $(MY_RULES) # ifdef ETAGS ifneq ($(CSRCS)$(CPPSRCS)$(HEADERS),) all:: TAGS TAGS:: $(CSRCS) $(CPPSRCS) $(HEADERS) $(ETAGS) $(CSRCS) $(CPPSRCS) $(HEADERS) endif endif ################################################################################ # Special gmake rules. ################################################################################ # # Disallow parallel builds with MSVC < 8 # ifneq (,$(filter 1200 1300 1310,$(_MSC_VER))) .NOTPARALLEL: endif # # Re-define the list of default suffixes, so gmake won't have to churn through # hundreds of built-in suffix rules for stuff we don't need. # .SUFFIXES: # # Fake targets. Always run these rules, even if a file/directory with that # name already exists. # .PHONY: all alltags boot checkout chrome realchrome clean clobber clobber_all export install libs makefiles realclean run_apprunner tools $(DIRS) $(TOOL_DIRS) FORCE # Used as a dependency to force targets to rebuild FORCE: # Delete target if error occurs when building target .DELETE_ON_ERROR: # Properly set LIBPATTERNS for the platform .LIBPATTERNS = $(if $(IMPORT_LIB_SUFFIX),$(LIB_PREFIX)%.$(IMPORT_LIB_SUFFIX)) $(LIB_PREFIX)%.$(LIB_SUFFIX) $(DLL_PREFIX)%$(DLL_SUFFIX) tags: TAGS TAGS: $(SUBMAKEFILES) $(CSRCS) $(CPPSRCS) $(wildcard *.h) -etags $(CSRCS) $(CPPSRCS) $(wildcard *.h) $(LOOP_OVER_PARALLEL_DIRS) $(LOOP_OVER_DIRS) echo-variable-%: @echo "$($*)" echo-tiers: @echo $(TIERS) echo-tier-dirs: @$(foreach tier,$(TIERS),echo '$(tier):'; echo ' dirs: $(tier_$(tier)_dirs)'; echo ' staticdirs: $(tier_$(tier)_staticdirs)'; ) echo-dirs: @echo $(DIRS) echo-module: @echo $(MODULE) echo-requires: @echo $(REQUIRES) echo-depth-path: @$(topsrcdir)/build/unix/print-depth-path.sh echo-module-name: @$(topsrcdir)/build/package/rpm/print-module-name.sh echo-module-filelist: @$(topsrcdir)/build/package/rpm/print-module-filelist.sh showtargs: ifneq (,$(filter $(PROGRAM) $(HOST_PROGRAM) $(SIMPLE_PROGRAMS) $(HOST_LIBRARY) $(LIBRARY) $(SHARED_LIBRARY),$(TARGETS))) @echo -------------------------------------------------------------------------------- @echo "PROGRAM = $(PROGRAM)" @echo "SIMPLE_PROGRAMS = $(SIMPLE_PROGRAMS)" @echo "LIBRARY = $(LIBRARY)" @echo "SHARED_LIBRARY = $(SHARED_LIBRARY)" @echo "SHARED_LIBRARY_LIBS = $(SHARED_LIBRARY_LIBS)" @echo "LIBS = $(LIBS)" @echo "DEF_FILE = $(DEF_FILE)" @echo "IMPORT_LIBRARY = $(IMPORT_LIBRARY)" @echo "STATIC_LIBS = $(STATIC_LIBS)" @echo "SHARED_LIBS = $(SHARED_LIBS)" @echo "EXTRA_DSO_LIBS = $(EXTRA_DSO_LIBS)" @echo "EXTRA_DSO_LDOPTS = $(EXTRA_DSO_LDOPTS)" @echo "DEPENDENT_LIBS = $(DEPENDENT_LIBS)" @echo -------------------------------------------------------------------------------- endif $(LOOP_OVER_PARALLEL_DIRS) $(LOOP_OVER_DIRS) showbuild: @echo "MOZ_BUILD_ROOT = $(MOZ_BUILD_ROOT)" @echo "MOZ_WIDGET_TOOLKIT = $(MOZ_WIDGET_TOOLKIT)" @echo "CC = $(CC)" @echo "CXX = $(CXX)" @echo "CCC = $(CCC)" @echo "CPP = $(CPP)" @echo "LD = $(LD)" @echo "AR = $(AR)" @echo "IMPLIB = $(IMPLIB)" @echo "FILTER = $(FILTER)" @echo "MKSHLIB = $(MKSHLIB)" @echo "MKCSHLIB = $(MKCSHLIB)" @echo "RC = $(RC)" @echo "CFLAGS = $(CFLAGS)" @echo "OS_CFLAGS = $(OS_CFLAGS)" @echo "COMPILE_CFLAGS = $(COMPILE_CFLAGS)" @echo "CXXFLAGS = $(CXXFLAGS)" @echo "OS_CXXFLAGS = $(OS_CXXFLAGS)" @echo "COMPILE_CXXFLAGS = $(COMPILE_CXXFLAGS)" @echo "COMPILE_CMFLAGS = $(COMPILE_CMFLAGS)" @echo "COMPILE_CMMFLAGS = $(COMPILE_CMMFLAGS)" @echo "LDFLAGS = $(LDFLAGS)" @echo "OS_LDFLAGS = $(OS_LDFLAGS)" @echo "DSO_LDOPTS = $(DSO_LDOPTS)" @echo "OS_INCLUDES = $(OS_INCLUDES)" @echo "OS_LIBS = $(OS_LIBS)" @echo "EXTRA_LIBS = $(EXTRA_LIBS)" @echo "BIN_FLAGS = $(BIN_FLAGS)" @echo "INCLUDES = $(INCLUDES)" @echo "DEFINES = $(DEFINES)" @echo "ACDEFINES = $(ACDEFINES)" @echo "BIN_SUFFIX = $(BIN_SUFFIX)" @echo "LIB_SUFFIX = $(LIB_SUFFIX)" @echo "DLL_SUFFIX = $(DLL_SUFFIX)" @echo "IMPORT_LIB_SUFFIX = $(IMPORT_LIB_SUFFIX)" @echo "INSTALL = $(INSTALL)" showhost: @echo "HOST_CC = $(HOST_CC)" @echo "HOST_CXX = $(HOST_CXX)" @echo "HOST_CFLAGS = $(HOST_CFLAGS)" @echo "HOST_LDFLAGS = $(HOST_LDFLAGS)" @echo "HOST_LIBS = $(HOST_LIBS)" @echo "HOST_EXTRA_LIBS = $(HOST_EXTRA_LIBS)" @echo "HOST_EXTRA_DEPS = $(HOST_EXTRA_DEPS)" @echo "HOST_PROGRAM = $(HOST_PROGRAM)" @echo "HOST_OBJS = $(HOST_OBJS)" @echo "HOST_PROGOBJS = $(HOST_PROGOBJS)" @echo "HOST_LIBRARY = $(HOST_LIBRARY)" showbuildmods:: @echo "Build Modules = $(BUILD_MODULES)" @echo "Module dirs = $(BUILD_MODULE_DIRS)" documentation: @cd $(DEPTH) $(DOXYGEN) $(DEPTH)/config/doxygen.cfg ifdef ENABLE_TESTS check:: $(SUBMAKEFILES) $(MAKE_DIRS) $(LOOP_OVER_PARALLEL_DIRS) $(LOOP_OVER_DIRS) $(LOOP_OVER_TOOL_DIRS) endif FREEZE_VARIABLES = \ CSRCS \ CPPSRCS \ EXPORTS \ XPIDLSRCS \ DIRS \ LIBRARY \ MODULE \ REQUIRES \ SHORT_LIBNAME \ TIERS \ $(NULL) $(foreach var,$(FREEZE_VARIABLES),$(eval $(var)_FROZEN := '$($(var))')) CHECK_FROZEN_VARIABLES = $(foreach var,$(FREEZE_VARIABLES), \ $(if $(subst $($(var)_FROZEN),,'$($(var))'),$(error Makefile variable '$(var)' changed value after including rules.mk. Was $($(var)_FROZEN), now $($(var)).))) libs export libs:: $(CHECK_FROZEN_VARIABLES)