# Change log All notable changes to this program are documented in this file. ## 0.32.0 (2022-10-13, `4563dd583110`) ### Added - Native aarch64 builds of geckodriver for Linux and Windows are now available. - Support `wheel` input source for [Actions], which is associated with a wheel-type input device. This endpoint is supported by geckodriver when using Firefox version ≥106. - Support `touch` as `pointerType` for `pointer` input source for [Actions], which is associated with a touch input device. This also includes the addition of all the remaining properties for `pointer` input sources as specified by WebDriver. This endpoint is supported by geckodriver when using Firefox version ≥104. ### Fixed - Using geckodriver to launch Firefox inside a sandbox -- for example a Firefox distribution using Snap or Flatpak -- can fail with a "Profile not found" error if the sandbox restricts Firefox's ability to access the system temporary directory. geckodriver uses the temporary directory to store Firefox profiles created during the run. This issue can now be worked around by using the `--profile-root` command line option or setting the `TMPDIR` environment variable to a location that both Firefox and geckodriver have read/write access to e.g.: ```bash % mkdir $HOME/tmp % geckodriver --profile-root=~/tmp ``` or ```bash % TMPDIR=$HOME/tmp geckodriver ``` Alternatively, geckodriver may be used with a Firefox install that is not packaged inside a sandbox e.g. from [mozilla.org]. - The sandboxed Firefox binary is now automatically detected when geckodriver is used from within a Snap confinement. Implemented by [Olivier Tilloy]. - On MacOS the geckodriver binary is now technically both signed and notarized. Note: The actual validation can only be performed if the machine that starts the geckodriver binary for the very first time is online. You can find more details on how to work around this issue in the [macOS notarization] section of the documentation. - The backup of the original Firefox preferences are now correctly restored on Android when the WebDriver session ends. ### Changed - Update dependencies ## 0.31.0 (2022-04-11, `b617178ef491`) ### Known problems - _Firefox running in Linux Sandbox (e.g. Snap package):_ Using geckodriver to launch Firefox inside a sandbox -- for example a Firefox distribution using Snap or Flatpak -- can fail with a "Profile not found" error if the sandbox restricts Firefox's ability to access the system temporary directory. geckodriver uses the temporary directory to store Firefox profiles created during the run. As workaround geckodriver may be used with a Firefox install that is not packaged inside a sandbox e.g. from [mozilla.org]. - _macOS 10.15 (Catalina) and later:_ Due to the requirement from Apple that all programs must be notarized, geckodriver will not work on Catalina if you manually download it through another notarized program, such as Firefox. Whilst we are working on a repackaging fix for this problem, you can find more details on how to work around this issue in the [macOS notarization] section of the documentation. ### Added - Users with the [Rust] toolchain installed can now build and install geckodriver from [crates.io] using Cargo: % cargo install geckodriver - Support for [Get Element Shadow Root] Implemented by [David Burns]. The standardised WebDriver [Get Element Shadow Root] endpoint provides a way to retrieve the Shadow Root of a given web element. This endpoint is supported by geckodriver when using Firefox version ≥96. - Support for additional hosts and origins Users can now specify a list of allowed `Host` and `Origin` headers for incoming requests using the [`--allow-hosts`] and [`--allow-origins`] command line options, respectively. When such a flag is provided, exactly the given values will be permitted. By default any request with an `Origin` header is rejected, and only requests containing the bound hostname (specified via `--host`), or an IP address, in the Host header are allowed. These configuration options are designed to support scenarios where geckodriver is running on a different network node to the host e.g. some container based setups. ### Fixed - Geckodriver lets Marionette itself select a system allocated port, so that it's no longer required to specify a fixed port when using a custom Firefox profile. This is done by reading the `MarionetteActivePort` file of the Firefox profile in-use. This helps to avoid port collisions when multiple Firefox instances are run in parallel. - It's no longer possible to specify both the `androidPackage` and `binary` capabilities togther within [`moz:firefoxOptions`] because these capabilites are mutually exclusive. ## 0.30.0 (2021-09-16, `d372710b98a6`) ### Security Fixes - CVE-2021-4138 Fixed a DNS rebinding issues by enforcing a stricter `Host` header check. Reported by Gabriel Corona. - Improved `Host` header checks to reject requests not sent to a well-known local hostname or IP, or the server-specified hostname. ### Known problems - geckodriver restricts connections to local IP addresses. This can interfere with deployments in which geckodriver is running on a different network node to the tests e.g. some container or virtual-machine based setups. - _macOS 10.15 (Catalina) and later:_ Due to the requirement from Apple that all programs must be notarized, geckodriver will not work on Catalina if you manually download it through another notarized program, such as Firefox. Whilst we are working on a repackaging fix for this problem, you can find more details on how to work around this issue in the [macOS notarization] section of the documentation. - _Android:_ For releases of Firefox 89.0 and earlier Marionette will only be enabled in GeckoView based applications when the Firefox preference `devtools.debugger.remote-enabled` is set to `true` via [`moz:firefoxOptions`]. ### Added - Support for WebDriver clients to opt in to WebDriver BiDi. Introduced the new boolean capability [`webSocketUrl`] that can be used by WebDriver clients to opt in to a bidirectional connection. A string capability with the same name will be returned by [`NewSession`], which contains the WebSocket URL of the newly created WebDriver session in the form of: `ws://host:port/session/`. When running on Android a port forward will be set on the host machine, which is using the exact same port as on the device. All the supported WebDriver BiDi commands depend on the version of Firefox, and not geckodriver. The first commands will be shipped in Firefox 94. - It's now possible to set additional preferences when a custom profile has been specified. At the end of the session they will be removed. ### Fixed - Added validation that the `--host` argument resolves to a local IP address. - Limit the `--foreground` argument of Firefox to MacOS only. - Increased Marionette handshake timeout to not fail for slow connections. - `Marionette:Quit` is no longer sent twice during session deletion. - When deleting a session that was attached to an already running browser instance, the browser is not getting closed anymore. - Android - Starting Firefox on Android from a Windows based host will now succeed as we are using the correct Unix path separator to construct on-device paths. - Arguments as specified in [`moz:firefoxOptions`] are now used when starting Firefox. - Port forwards set for Marionette and the WebSocket server (WebDriver BiDi) are now correctly removed when geckodriver exits. - The test root folder is now removed when geckodriver exists. ## 0.29.1 (2021-04-09, `970ef713fe58`) ### Known problems - _macOS 10.15 (Catalina) and later:_ Due to the requirement from Apple that all programs must be notarized, geckodriver will not work on Catalina if you manually download it through another notarized program, such as Firefox. Whilst we are working on a repackaging fix for this problem, you can find more details on how to work around this issue in the [macOS notarization] section of the documentation. - _Android:_ Marionette will only be enabled in GeckoView based applications when the Firefox preference `devtools.debugger.remote-enabled` is set to `true` via [`moz:firefoxOptions`]. This will be fixed in the Firefox 90 release for Android. ### Added - When testing GeckoView based applications on Android it's now enough to specify the `androidPackage` capability. The appropriate activity name, and required intent arguments will now automatically be used for applications released by Mozilla. - Native AArch64 (M1) builds of geckodriver for MacOS are now available. These are currently shipped as Tier2 due to missing test infrastructure. Please let us know if you experience issues. ### Fixed - Fixed a stack overflow crash in thread 'webdriver dispatcher' when handling certain device errors. - Fixed an application crash due to missing permissions on unrooted devices by changing the location of the test related files, e.g the profile folder. Therefore the deprecated --android-storage command line argument now defaults to the `sdcard` option, which changed its location to `$EXTERNAL_STORAGE/Android/data/%androidPackage%/files/`. With this change proper support for unrooted devices running Android 10+ has been added. _Note_: Do not use the --android-storage command line argument anymore unless there is a strong reason. It will be removed in a future release. ## 0.29.0 (2021-01-14, `cf6956a5ec8e`) ### Known problems - _macOS 10.15 (Catalina) and later:_ Due to the requirement from Apple that all programs must be notarized, geckodriver will not work on Catalina if you manually download it through another notarized program, such as Firefox. Whilst we are working on a repackaging fix for this problem, you can find more details on how to work around this issue in the [macOS notarization] section of the documentation. - _Android:_ Marionette will only be enabled in GeckoView based applications when the Firefox preference `devtools.debugger.remote-enabled` is set to `true` via [`moz:firefoxOptions`]. This will be fixed in one of the upcoming Firefox for Android releases. In some cases geckodriver could crash due to a stack overflow when handling certain device errors. On unrooted Android 10+ devices startup crashes of the application can be experienced due to an inappropriate location of test related files, e.g the profile folder. ### Added - Introduced the new boolean capability [`moz:debuggerAddress`] that can be used to opt-in to the experimental Chrome DevTools Protocol (CDP) implementation. A string capability with the same name will be returned by [`NewSession`], which contains the `host:port` combination of the HTTP server that can be used to query for websockets of available targets. Note: For this experimental feature the site-isolation support of Firefox aka [Fission] will be not available. ## 0.28.0 (2020-11-03, `c00d2b6acd3f`) ### Known problems - _macOS 10.15 (Catalina) and later:_ Due to the requirement from Apple that all programs must be notarized, geckodriver will not work on Catalina if you manually download it through another notarized program, such as Firefox. Whilst we are working on a repackaging fix for this problem, you can find more details on how to work around this issue in the [macOS notarization] section of the documentation. - _Android:_ Marionette will only be enabled in GeckoView based applications when the Firefox preference `devtools.debugger.remote-enabled` is set to `true` via [`moz:firefoxOptions`]. This will be fixed in one of the upcoming Firefox for Android releases. In some cases geckodriver could crash due to a stack overflow when handling certain device errors. On unrooted Android 10+ devices startup crashes of the application can be experienced due to an inappropriate location of test related files, e.g the profile folder. ### Added - The command line flag `--android-storage` has been added, to allow geckodriver to also control Firefox on root-less Android devices. See the [documentation][Flags] for available values. ### Fixed - Firefox can be started again via a shell script that is located outside of the Firefox directory on Linux. - If Firefox cannot be started by geckodriver the real underlying error message is now being reported. - Version numbers for minor and extended support releases of Firefox are now parsed correctly. ### Removed - Since Firefox 72 extension commands for finding an element’s anonymous children and querying its attributes are no longer needed, and have been removed. ## 0.27.0 (2020-07-27, `7b8c4f32cdde`) ### Security Fixes - CVE-2020-15660 Improved validation of incoming requests to prevent remote requests being treated as local. Reported by Gabriel Corona. - Added additional checks on the `Content-Type` header for `POST` requests to disallow `application/x-www-form-urlencoded`, `multipart/form-data` and `text/plain`. - Added checking of the `Origin` header for `POST` requests. - The version number of Firefox is now checked when establishing a session. ### Known problems - _macOS 10.15 (Catalina) and later:_ Due to the requirement from Apple that all programs must be notarized, geckodriver will not work on Catalina if you manually download it through another notarized program, such as Firefox. Whilst we are working on a repackaging fix for this problem, you can find more details on how to work around this issue in the [macOS notarization] section of the documentation. - _Android:_ Marionette will only be enabled in GeckoView based applications when the Firefox preference `devtools.debugger.remote-enabled` is set to `true` via [`moz:firefoxOptions`]. This will be fixed in one of the upcoming Firefox for Android releases. In some cases geckodriver could crash due to a stack overflow when handling certain device errors. ### Added - To set environment variables for the launched Firefox for Android, it is now possible to add an `env` object on [`moz:firefoxOptions`] (note: this is not supported for Firefox Desktop) - Support for print-to-PDF The newly standardised WebDriver [Print] endpoint provides a way to render pages to a paginated PDF representation. This endpoint is supported by geckodriver when using Firefox version ≥78. - Support for same-site cookies Cookies can now be set with a `same-site` parameter, and the value of that parameter will be returned when cookies are retrieved. Requires Firefox version ≥79. Thanks to [Peter Major] for the patch. ### Fixed - _Android:_ - Firefox running on Android devices can now be controlled from a Windows host. - Setups with multiple connected Android devices are now supported. - Improved cleanup of configuration files. This prevents crashes if the application is started manually after launching it through geckodriver. - Windows and Linux binaries are again statically linked. ## 0.26.0 (2019-10-12, `e9783a644016'`) Note that with this release the minimum recommended Firefox version has changed to Firefox ≥60. ### Known problems - _macOS 10.15 (Catalina) and later:_ Due to the recent requirement from Apple that all programs must be notarized, geckodriver will not work on Catalina if you manually download it through another notarized program, such as Firefox. Whilst we are working on a repackaging fix for this problem, you can find more details on how to work around this issue in the [macOS notarization] section of the documentation. - _Windows:_ You must still have the [Microsoft Visual Studio redistributable runtime] installed on your system for the binary to run. This is a known bug which we weren't able fix for this release. - _Android:_ Marionette will only be enabled in GeckoView based applications when the Firefox preference `devtools.debugger.remote-enabled` is set to `true` via [`moz:firefoxOptions`]. This will be fixed in one of the upcoming Firefox for Android releases. In some cases geckodriver could crash due to a stack overflow when handling certain device errors. ### Added - Support for Firefox on Android Starting with this release geckodriver is able to connect to Firefox on Android systems, and to control packages based on [GeckoView]. Support for Android works by the geckodriver process running on a host system and Firefox running within either an emulator or on a physical device connected to the host system. This requires you to first [enable remote debugging on the Android device]. The WebDriver client must set the [`platformName` capability] to "`android`" and the `androidPackage` capability within [`moz:firefoxOptions`] to the Android package name of the Firefox application. The full list of new capabilities specific to Android, instructions how to use them, and examples can be found in the [`moz:firefoxOptions`] documentation on MDN. When the session is created, the `platformName` capability will return "`android`" instead of reporting the platform of the host system. ### Changed - Continued Marionette refactoring changes 0.25.0 came with a series of internal changes for how geckodriver communicates with Firefox over the Marionette protocol. This release contains the second half of the refactoring work. ### Fixed - Connection attempts to Firefox made more reliable geckodriver now waits for the Marionette handshake before assuming the session has been established. This should improve reliability in creating new WebDriver sessions. - Corrected error codes used during session creation When a new session was being configured with invalid input data, the error codes returned was not always consistent. Attempting to start a session with a malformed capabilities configuration will now return the [`invalid argument`] error consistently. ## 0.25.0 (2019-09-09, `bdb64cf16b68`) __Note to Windows users!__ With this release you must have the [Microsoft Visual Studio redistributable runtime] installed on your system for the binary to run. This is a [known bug](https://github.com/mozilla/geckodriver/issues/1617) with this particular release that we intend to release a fix for soon. ### Added - Added support for HTTP `HEAD` requests to the HTTPD geckodriver now responds correctly to HTTP `HEAD` requests, which can be used for probing whether it supports a particular API. Thanks to [Bastien Orivel] for this patch. - Added support for searching for Nightly’s default path on macOS If the location of the Firefox binary is not given, geckodriver will from now also look for the location of Firefox Nightly in the default locations. The ordered list of search paths on macOS is as follows: 1. `/Applications/Firefox.app/Contents/MacOS/firefox-bin` 2. `$HOME/Applications/Firefox.app/Contents/MacOS/firefox-bin` 3. `/Applications/Firefox Nightly.app/Contents/MacOS/firefox-bin` 4. `$HOME/Applications/Firefox Nightly.app/Contents/MacOS/firefox-bin` Thanks to [Kriti Singh] for this patch. - Support for application bundle paths on macOS It is now possible to pass an application bundle path, such as `/Applications/Firefox.app` as argument to the `binary` field in [`moz:firefoxOptions`]. This will be automatically resolved to the absolute path of the binary when Firefox is started. Thanks to [Nupur Baghel] for this patch. - macOS and Windows builds are signed With this release of geckodriver, executables for macOS and Windows are signed using the same certificate key as Firefox. This should help in cases where geckodriver previously got misidentified as a virus by antivirus software. ### Removed - Dropped support for legacy Selenium web element references The legacy way of serialising web elements, using `{"ELEMENT": }`, has been removed in this release. This may break older Selenium clients and clients which are otherwise not compatible with the WebDriver standard. Thanks to [Shivam Singhal] for this patch. - Removed `--webdriver-port` command-line option `--webdriver-port ` was an undocumented alias for `--port`, initially used for backwards compatibility with clients prior to Selenium 3.0.0. ### Changed - Refactored Marionette serialisation Much of geckodriver’s internal plumbing for serialising WebDriver requests to Marionette messages has been refactored to decrease the amount of manual lifting. This work should have no visible side-effects for users. Thanks to [Nupur Baghel] for working on this throughout her Outreachy internship at Mozilla. - Improved error messages for incorrect command-line usage ### Fixed - Errors related to incorrect command-line usage no longer hidden By mistake, earlier versions of geckodriver failed to print incorrect flag use. With this release problems are again written to stderr. - Search system path for Firefox binary on BSDs geckodriver would previously only search the system path for the `firefox` binary on Linux. Now it supports different BSD flavours as well. ## 0.24.0 (2019-01-28, `917474f3473e`) ### Added - Introduces `strictFileInteractability` capability The new capability indicates if strict interactability checks should be applied to `` elements. As strict interactability checks are off by default, there is a change in behaviour when using [Element Send Keys] with hidden file upload controls. - Added new endpoint `GET /session/{session id}/moz/screenshot/full` for taking full document screenshots, thanks to Greg Fraley. - Added new `--marionette-host ` flag for binding to a particular interface/IP layer on the system. - Added new endpoint `POST /session/{session_id}/window/new` for the [New Window] command to create a new top-level browsing context, which can be either a window or a tab. The first version of Firefox supporting this command is Firefox 66.0. - When using the preference `devtools.console.stdout.content` set to `true` logging of console API calls like `info()`, `warn()`, and `error()` can be routed to stdout. - geckodriver now sets the `app.update.disabledForTesting` preference to prevent Firefox >= 65 from automatically updating whilst under automation. ### Removed - ARMv7 HF builds have been discontinued We announced back in September 2018 that we would stop building for ARM, but builds can be self-serviced by building from source. To cross-compile from another host system, you can use this command: % cargo build --target armv7-unknown-linux-gnueabihf ### Changed - Allow file uploads to hidden `` elements Through a series of changes to the WebDriver specification, geckodriver is now aligned with chromedriver’s behaviour that allows interaction with hidden `` elements. This allows WebDriver to be used with various popular web frameworks that—through indirection—hides the file upload control and invokes it through other means. - Allow use of an indefinite script timeout for the [Set Timeouts] command, thanks to reimu. ### Fixed - Corrected `Content-Type` of response header to `utf-8` to fix an HTTP/1.1 compatibility bug. - Relaxed the deserialization of timeouts parameters to allow unknown fields for the [Set Timeouts] command. - Fixed a regression in the [Take Element Screenshot] to not screenshot the viewport, but the requested element. ## 0.23.0 (2018-10-03) This release contains a number of fixes for regressions introduced in 0.22.0, where we shipped a significant refactoring to the way geckodriver internally dealt with JSON serialisation. ### Removed - The POST `/session/{session id}/element/{element id}/tap` endpoint was removed, thanks to Kerem Kat. ### Changed - [webdriver crate] upgraded to 0.38.0. ### Fixed - `desiredCapabilities` and `requiredCapabilities` are again recognised on session creation A regression in 0.22.0 caused geckodriver to recognise `desired` and `required` instead of the correct `desiredCapabilities` and `requiredCapabilities`. This will have caused significant problems for users who relied on this legacy Selenium-style session creation pattern. Do however note that support for Selenium-styled new session requests is temporary and that this will be removed sometime before the 1.0 release. - `duration` field made optional on pause actions A regression in 0.22.0 caused the pause action primitive to require a `duration` field. This has now been fixed so that pauses in action chains can be achieved with the default duration. - Log level formatted to expected Marionette input A regression in 0.22.0 caused the log level to be improperly formatted when using Firefox pre-releases. This is now fixed so that the requested log level is correctly interpreted by Marionette. - `temporary` field on addon installation made optional A regression in 0.22.0 caused the `temporary` field for POST `/session/{session id}/moz/addon/install` to be mandatory. This has now been fixed so that an addon is installed permanently by default. - SHA1s in version information uses limited number of characters The SHA1 used in `--version` when building geckodriver from a git repository is now limited to 12 characters, as it is when building from an hg checkout. This ensures reproducible builds. ## 0.22.0 (2018-09-15) This release marks an important milestone on the path towards a stable release of geckodriver. Large portions of geckodriver and the [webdriver] library it is based on has been refactored to accommodate using [serde] for JSON serialization. We have also made great strides to improving [WebDriver conformance], to the extent that geckodriver is now _almost_ entirely conforming to the standard. ### Added - Support for WebDriver web element-, web frame-, and web window identifiers from Firefox. - Added support for the non-configurable `setWindowRect` capability from WebDriver. This capability informs whether the attached browser supports manipulating the window dimensions and position. - A new extension capability `moz:geckodriverVersion` is returned upon session creation. ### Changed - All JSON serialization and deserialisation has moved from rustc_serialize to [serde]. - The HTTP status codes used for [script timeout] and [timeout] errors has changed from Request Timeout (408) to Internal Server Error (500) in order to not break HTTP/1.1 `Keep-Alive` support, as HTTP clients interpret the old status code to mean they should duplicate the request. - The HTTP/1.1 `Keep-Alive` timeout for persistent connections has been increased to 90 seconds. - An [invalid session ID] error is now returned when there is no active session. - An [invalid argument] error is now returned when [Add Cookie] is given invalid parameters. - The handshake when geckodriver connects to Marionette has been hardened by killing the Firefox process if it fails. - The handshake read timeout has been reduced to 10 seconds instead of waiting forever. - The HTTP server geckodriver uses, [hyper], has been upgraded to version 0.12, thanks to [Bastien Orivel]. - geckodriver version number is no longer logged on startup, as the log level is not configured until a session is created. The version number is available through `--version`, and now also through a new `moz:geckodriverVersion` field in the matched capabilities. - [webdriver crate] upgraded to 0.37.0. ### Fixed - Parsing [timeout object] values has been made WebDriver conforming, by allowing floats as input. - Implicit downloads of OpenH264 and Widevine plugins has been disabled. - The commit hash and date displayed when invoking `--version` is now well-formatted when built from an hg repository, thanks to [Jeremy Lempereur]. - Many documentation improvements, now published on . ## 0.21.0 (2018-06-15) Note that with this release of geckodriver the minimum recommended Firefox and Selenium versions have changed: - Firefox 57 (and greater) - Selenium 3.11 (and greater) ### Added - Support for the chrome element identifier from Firefox. - The `unhandledPromptBehavior` capability now accepts `accept and notify`, `dismiss and notify`, and `ignore` options. Note that the unhandled prompt handler is not fully supported in Firefox at the time of writing. ### Changed - Firefox will now be started with the `-foreground` and `-no-remote` flags if they have not already been specified by the user in [`moz:firefoxOptions`]. `-foreground` will ensure the application window gets focus when Firefox is started, and `-no-remote` will prevent remote commands to this instance of Firefox and also ensure we always start a new instance. - WebDriver commands that do not have a return value now correctly return `{value: null}` instead of an empty dictionary. - The HTTP server now accepts `Keep-Alive` connections. - Firefox remote protocol command mappings updated. All Marionette commands changed to make use of the `WebDriver:` prefixes introduced with Firefox 56. - Overhaul of Firefox preferences. Already deprecated preferences in Firefox versions earlier than 57 got removed. - [webdriver crate] upgraded to 0.36.0. ### Fixed - Force use of IPv4 network stack. On certain system configurations, where `localhost` resolves to an IPv6 address, geckodriver would attempt to connect to Firefox on the wrong IP stack, causing the connection attempt to time out after 60 seconds. We now ensure that geckodriver uses IPv4 consistently to both connect to Firefox and for allocating a free port. - geckodriver failed to locate the correct Firefox binary if it was found under a _firefox_ or _firefox-bin_ directory, depending on the system, because it thought the parent directory was the executable. - On Unix systems (macOS, Linux), geckodriver falsely reported non-executable files as valid binaries. - When stdout and stderr is redirected by geckodriver, a bug prevented the redirections from taking effect. ## 0.20.1 (2018-04-06) ### Fixed - Avoid attempting to kill Firefox process that has stopped. With the change to allow Firefox enough time to shut down in 0.20.0, geckodriver started unconditionally killing the process to reap its exit status. This caused geckodriver to inaccurately report a successful Firefox shutdown as a failure. The regression should not have caused any functional problems, but the termination cause and the exit status are now reported correctly. ## 0.20.0 (2018-03-08) ### Added - New `--jsdebugger` flag to open the [Browser Toolbox] when Firefox launches. This is useful for debugging Marionette internals. - Introduced the temporary, boolean capability `moz:useNonSpecCompliantPointerOrigin` to disable the WebDriver conforming behavior of calculating the Pointer Origin. ### Changed - HTTP status code for the [`StaleElementReference`] error changed from 400 (Bad Request) to 404 (Not Found). - Backtraces from geckodriver no longer substitute for missing Marionette stacktraces. - [webdriver crate] upgraded to 0.35.0. ### Fixed - The Firefox process is now given ample time to shut down, allowing enough time for the Firefox shutdown hang monitor to kick in. Firefox has an integrated background monitor that observes long-running threads during shutdown. These threads will be killed after 63 seconds in the event of a hang. To allow Firefox to shut down these threads on its own, geckodriver has to wait that time and some additional seconds. - Grapheme clusters are now accepted as input for keyboard input to actions. Input to the `value` field of the `keyDown` and `keyUp` action primitives used to only accept single characters, which means geckodriver would error when a valid grapheme cluster was sent in, for example with the tamil nadu character U+0BA8 U+0BBF. Thanks to Greg Fraley for fixing this bug. - Improved error messages for malformed capability values. ## 0.19.1 (2017-10-30) ### Changed - Search suggestions in the location bar turned off as not to trigger network connections - Block addons incompatible with E10s ### Fixed - Marionette stacktraces are now correctly propagated - Some error messages have been clarified ### Removed - Removed obsolete `socksUsername` and `socksPassword` proxy configuration keys because neither were picked up or recognised ## 0.19.0 (2017-09-16) Note that with geckodriver 0.19.0 the following versions are recommended: - Firefox 55.0 (and greater) - Selenium 3.5 (and greater) ### Added - Added endpoint: - POST `/session/{session id}/window/minimize` for the [Minimize Window] command - Added preference `extensions.shield-recipe-client.api_url` to disable shield studies which could unexpectedly change the behavior of Firefox - Introduced the temporary, boolean capability `moz:webdriverClick` to enable the WebDriver conforming behavior of the [Element Click] command - Added crashreporter environment variables to better control the browser in case of crashes - Added preference `dom.file.createInChild` set to true to allow file object creation in content processes ### Changed - Log all used application arguments and not only `-marionette` - Early abort connection attempts to Marionette if the Firefox process closed unexpectetly - Removed deprecated `socksProxyVersion` in favor of `socksVersion` - Removed `ftpProxyPort`, `httpProxyPort`, `sslProxyPort`, and `socksProxyPort` because _ports_ have to be set for `ftpProxy`, `httpProxy`, `sslProxy`, and `socksProxy` using ":" - The `proxyType` `noproxy` has been replaced with `direct` in accordance with recent WebDriver specification changes - The [`WindowRectParameters`] have been updated to return signed 32-bit integers in accordance with the CSS and WebDriver specifications, and to be more liberal with the input types - Mapped the [`FullscreenWindow`] to the correct Marionette command - To make sure no browser process is left behind when the [`NewSession`] fails, the process is closed immediately now - `/moz/addon/install` command accepts an `addon` parameter, in lieu of `path`, containing an addon as a Base64 string (fixed by [Jason Juang]) - [webdriver crate] upgraded to version 0.31.0 - [mozrunner crate] upgraded to version 0.5.0 ### Removed - Removed the following obsolete preferences for Firefox: - `browser.safebrowsing.enabled` - `browser.safebrowsing.forbiddenURIs.enabled` - `marionette.defaultPrefs.port` - `marionette.logging` ## 0.18.0 (2017-07-10) ### Changed - [`RectResponse`] permits returning floats for `width` and `height` fields - New type [`CookieResponse`] for the [`GetNamedCookie`] command returns a single cookie, as opposed to an array of a single cookie - To pick up a prepared profile from the filesystem, it is now possible to pass `["-profile", "/path/to/profile"]` in the `args` array on [`moz:firefoxOptions`] - geckodriver now recommends Firefox 53 and greater - Version information (`--version`) contains the hash from from the commit used to build geckodriver - geckodriver version logged on startup - [webdriver crate] upgraded to version 0.27.0 - [mozrunner crate] upgraded to version 0.4.1 ### Fixed - The [`SetTimeouts`] command maps to the Marionette `setTimeouts` command, which makes geckodriver compatible with Firefox 56 and greater - Linux x86 (i686-unknown-linux-musl) builds are fixed ## 0.17.0 (2017-06-09) ### Added - Added endpoints: - POST `/session/{session id}/window/fullscreen` to invoke the window manager-specific `full screen` operation - POST `/session/{session id}/moz/addon/install` to install an extension (Gecko only) - POST `/session/{session id}/moz/addon/uninstall` to uninstall an extension (Gecko only) ### Changed - Increasing the length of the `network.http.phishy-userpass-length` preference will cause Firefox to not prompt when navigating to a website with a username or password in the URL - Library dependencies upgraded to mozrunner 0.4 and mozprofile 0.3 to allow overriding of preferences via capabilities if those have been already set in the profile - Library dependencies upgraded to mozversion 0.1.2 to only use the normalized path of the Firefox binary for version checks but not to actually start the browser, which broke several components in Firefox on Windows ### Fixed - The [SetWindowRect] command now returns the [WindowRectResponse] when it is done - Use ASCII versions of array symbols to properly display them in the Windows command prompt - Use [`SessionNotCreated`] error instead of [`UnknownError`] if there is no current session ## 0.16.1 (2017-04-26) ### Fixed - Read Firefox version number from stdout when failing to look for the application .ini file (fixes [Selenium #3884](https://github.com/SeleniumHQ/selenium/issues/3884)) - Session is now ended when closing the last Firefox window (fixes [#613](https://github.com/mozilla/geckodriver/issues/613)) ## 0.16.0 (2017-04-21) Note that geckodriver v0.16.0 is only compatible with Selenium 3.4 and greater. ### Added - Support for WebDriver-conforming [New Session] negotiation, with `desiredCapabilities`/`requiredCapabilities` negotiation as fallback - Added two new endpoints: - GET `/session/{session id}/window/rect` for [Get Window Rect] - POST `/session/{session id}/window/rect` for [Set Window Rect] - Align errors with the [WebDriver errors]: - Introduces new errors [`ElementClickIntercepted`], [`ElementNotInteractable`], [`InvalidCoordinates`], [`NoSuchCookie`], [`UnableToCaptureScreen`], and [`UnknownCommand`] - Removes `ElementNotVisible` and `InvalidElementCoordinates` errors ### Removed - Removed following list of unused endpoints: - GET `/session/{session id}/alert_text` - POST `/session/{session id}/alert_text` - POST `/session/{session id}/accept_alert` - POST `/session/{session id}/dismiss_alert` - GET `/session/{session id}/window_handle` - DELETE `/session/{session id}/window_handle` - POST `/session/{session id}/execute_async` - POST `/session/{session id}/execute` ### Changed - [`SendKeysParameters`], which is used for the [Element Send Keys] and [Send Alert Text] commands, has been updated to take a string `text` field - [`CookieResponse`] and [`CloseWindowResponse`] fixed to be properly wrapped in a `value` field, like other responses - Allow negative numbers for `x` and `y` fields in `pointerMove` action - Disable Flash and the plugin container in Firefox by default, which should help mitigate the “Plugin Container for Firefox has stopped working” problems [many users were reporting](https://github.com/mozilla/geckodriver/issues/225) when deleting a session - Preferences passed in a profile now take precedence over set of default preferences defined by geckodriver (fixed by [Marc Fisher](https://github.com/DrMarcII)) - The exceptions are the `marionette.port` and `marionette.log.level` preferences and their fallbacks, which are set unconditionally and cannot be overridden - Remove default preference that disables unsafe CPOW checks - WebDriver library updated to 0.25.2 ### Fixed - Fix for the “corrupt deflate stream” exception that sometimes occurred when trying to write an empty profile by [@kirhgoph](https://github.com/kirhgoph) - Recognise `sslProxy` and `sslProxyPort` entries in the proxy configuration object (fixed by [Jason Juang]) - Fix “`httpProxyPort` was not an integer” error (fixed by [Jason Juang]) - Fix broken unmarshaling of _Get Timeouts_ response format from Firefox 52 and earlier (fixed by [Jason Juang]) - Allow preferences in [`moz:firefoxOptions`] to be both positive- and negative integers (fixed by [Jason Juang]) - Allow IPv6 hostnames in the proxy configuration object - i686-unknown-linux-musl (Linux 32-bit) build fixed - Log messages from other Rust modules are now ignored - Improved log messages to the HTTPD ## 0.15.0 (2017-03-08) ### Added - Added routing and parsing for the [Get Timeouts] command ### Changed - All HTTP responses are now wrapped in `{value: …}` objects per the WebDriver specification; this may likely require you to update your client library - Pointer move action’s `element` key changed to `origin`, which lets pointer actions originate within the context of the viewport, the pointer’s current position, or from an element - Now uses about:blank as the new tab document; this was previously disabled due to [bug 1333736](https://bugzil.la/1333736) in Marionette - WebDriver library updated to 0.23.0 ### Fixed - Aligned the data structure accepted by the [Set Timeouts] command with the WebDriver specification ## 0.14.0 (2017-01-31) ### Changed - Firefox process is now terminated and session ended when the last window is closed - WebDriver library updated to version 0.20.0 ### Fixed - Stacktraces are now included when the error originates from within the Rust stack - HTTPD now returns correct response headers for `Content-Type` and `Cache-Control` thanks to [Mike Pennisi] ## 0.13.0 (2017-01-06) ### Changed - When navigating to a document with an insecure- or otherwise invalid TLS certificate, an [insecure certificate] error will be returned - On macOS, deducing Firefox’ location on the system will look for _firefox-bin_ on the system path (`PATH` environmental variable) before looking in the applications folder - Window position coordinates are allowed to be negative numbers, to cater for maximised window positioning on Windows - WebDriver library updated to version 0.18.0 ### Fixed - Check for single-character key codes in action sequences now counts characters instead of bytes ## 0.12.0 (2017-01-03) ### Added - Added [Take Element Screenshot] command - Added new [Status] command - Added routing for the [Get Timeouts] command, but it is not yet implemented in Marionette, and will return an _unsupported operation_ error until it is - Implemented routing for [new actions API](Actions), but it too is not yet fully implemented in Marionette ### Changed - [Synced Firefox preferences](https://github.com/mozilla/geckodriver/commit/2bfdc3ec8151c427a6a75a6ba3ad203459540495) with those used in Mozilla automation - Default log level for debug builds of Firefox, which used to be `DEBUG`, changed to `INFO`-level - WebDriver library dependency upgraded to 0.17.1 - Using _session not created_ error when failing to start session - geckodriver will exit with exit code 69 to indicate that the port is unavailable ### Fixed - Improved logging when starting Firefox - Reverted to synchronous logging, which should address cases of inconsistent output when failing to bind to port - Clarified in README that geckodriver is not supported on Windows XP - Added documentation of supported capabilities to [README] - Included capabilities example in the [README] ## 0.11.1 (2016-10-10) ### Fixed - Version number in binary now reflects the release version ## 0.11.0 (2016-10-10) ### Added - Introduced continuous integration builds for Linux- and Windows 32-bit binaries - Added commands for setting- and getting the window position - Added new extension commands for finding an element’s anonymous children and querying its attributes; accessible through the `/session/{sessionId}/moz/xbl/{elementId}/anonymous_children` to return all anonymous children and `/session/{sessionId}/moz/xbl/{elementId}/anonymous_by_attribute` to return an anonymous element by a name and attribute query - Introduced a [`moz:firefoxOptions`] capability to customise a Firefox session: - The `binary`, `args`, and `profile` entries on this dictionary is equivalent to the old `firefox_binary`, `firefox_args`, and `firefox_profile` capabilities, which have now all been removed - The `log` capability takes a dictionary such as `{log: "trace"}` to enable trace level verbosity in Gecko - The `prefs` capability lets you define Firefox preferences through capabilities - Re-introduced the `--webdriver-port` argument as a hidden alias to `--port` ### Changed - `firefox_binary`, `firefox_args`, and `firefox_profile` capabilities removed in favour of the [`moz:firefoxOptions`] dictionary detailed above and in the [README] - Removed `--no-e10s` flag, and geckodriver will from now rely on the Firefox default multiprocessing settings (override using preferences) - Disable pop-up blocker in the default profile by @juangj - Changed Rust compiler version to 1.12 (beta) temporarily because of [trouble linking Musl binaries](https://github.com/rust-lang/rust/issues/34978) - Replaced _env_logger_ logging facility with the _slog_ package, causing the `RUST_LOG` environment variable to no longer have any affect - Updated the WebDriver Rust library to version 0.15 ### Fixed - Corrected link to repository in Cargo metadata - Verbosity shorthand flag `-v[v]` now works again, following the replacement of the argument parsing library in the previous release - When the HTTPD fails to start, errors are propagated to the user - Disabled the additional welcome URL (`startup.homepage_welcome_url.additional`) so that officially branded Firefox builds do not start with two open tabs in fresh profiles - Disabled homepage override URL redirection on milestone upgrades, which means a tab with an upgrade notice is not displayed when launching a new Firefox version ## 0.10.0 (2016-08-02) ### Changed - Use multi-process Firefox (e10s) by default, added flag `--no-e10s` to disable it and removed `--e10s` flag - Disable autofilling of forms by default by [Sven Jost] - Replace _argparse_ with _clap_ for arguments parsing ### Fixed - Attempt to deploy a single file from Travis when making a release - Grammar fix in [README] ## 0.9.0 (2016-06-30) ### Added - Add ability to use `firefox_binary` capability to define location of Firefox to use - Automatically detect the default Firefox path if one is not given - Cross-compile to Windows and ARMv7 (HF) in CI - Add Musl C library-backed static binaries in CI - Add `-v`, `-vv`, and `--log LEVEL` flags to increase Gecko verbosity - Add Get Element Property endpoint - Add new `--version` flag showing copying information and a link to the repository ### Changed - Now connects to a Marionette on a random port by default - Update webdriver-rust library dependency - Migrated to use Travis to deploy new releases - Reduced amount of logging - Introduced a changelog (this) ## 0.8.0 (2016-06-07) ### Added - Allow specifying array of arguments to the Firefox binary through the `firefox_args` capability - Pass parameters with [New Session] command ### Changed - Change product name to _geckodriver_ - Make README more exhaustive - Quit Firefox when deleting a session - Update webdriver-rust library - Update dependencies ### Fixed - Fix tests - FIx typo in error message for parsing errors ## 0.7.1 (2016-04-27) ### Added - Add command line flag for using e10s enabled Firefox by [Kalpesh Krishna] - Allow providing custom profiles ### Changed - Allow binding to an IPv6 address by [Jason Juang] - By default, connect to host-agnostic localhost by [Jason Juang] - Make `GeckoContextParameters` public - Update dependencies ### Fixed - Squash rustc 1.6 warnings by using `std::thread::sleep(dur: Duration)` ## 0.6.2 (2016-01-20) ### Added - Add LICENSE file from [Joshua Burning] - Schedule builds in CI on pushes and pull requests ### Changed - Enable CPOWs in Marionette ## 0.6.0 (2016-01-12) ### Added - Add Get Page Source endpoint ### Changed - Handle arrays being sent from Marionette - Correct build steps in [README] - Update what properties are read from errors sent by Marionette - Update dependencies ## 0.5.0 (2015-12-10) ### Changed - Update argparse dependency to use Cargo - Update to the latest version of the Marionette wire protocol - Update to latest webdriver-rust library - Update dependencies ## 0.4.2 (2015-10-02) ### Changed - Skip compiling optional items in hyper ## 0.4.1 (2015-10-02) ### Changed - Update webdriver-rust library - Update dependencies ## 0.4.0 (2015-09-28) ### Added - Add command extensions for switching between content- and chrome contexts - Add more documentation from [Vlad Filippov] ### Changed - Update Cargo.lock with new dependencies for building - Update for protocol updates that flatten commands - Update to new protocol error handling - Update for Marionette protocol version 3 changes - Strip any leading and trailing `{}` from the `sessionId` Marionette returns - Update dependencies ### Fixed - Fix `GetCSSValue` message to send correct key `propertyName` - Fix example in documentation from @vladikoff ## 0.3.0 (2015-08-17) ### Added - Add support for finding elements in subtrees ## 0.2.0 (2015-05-20) ### Added - Extra debug messages - Add ability to set WebDriver port - Add support for getting the active element - Add support for `GetCookies` and `DeleteCookie`/`DeleteCookies` - Add preferences that switch off certain features not required for WebDriver tests ### Changed - Make failing to communicate with Firefox a fatal error that closes the session - Shut down session only when losing connection - Better handling of missing command line flags - Poll for connection every 100ms rather than every 100s - Switch to string-based error codes - Switch webdriver-rust library dependency to be pulled from git - Update dependencies ### Fixed - Handle null id for switching to frame more correctly ## 0.1.0 (2015-04-09) ### Added - Add proxy for converting WebDriver HTTP protocol to Marionette protocol - Add endpoints for modal dialogue support - Allow connecting to a running Firefox instance - Add explicit Cargo.lock file - Start Firefox when we get a [NewSession] command - Add flag parsing and address parsing - Add basic error handling ### Changed - Update for Rust beta - Switch to new IO libraries - Pin webdriver-rust commit so we can upgrade rustc versions independently - Set preferences when starting Firefox - Improve some error messages - Re-enable environment variable based logging ### Fixed - Fix Get Element Rect command to return floats instead of integers - Fix passing of web elements to Switch To Frame command - Fix serialisation of script commands - Fix assorted bugs found by the Selenium test suite - Fix conversion of Find Element/Find Elements responses from Marionette to WebDriver - Fixed build by updating Cargo.lock with new dependencies for building - Squash compile warnings [README]: https://github.com/mozilla/geckodriver/blob/master/README.md [Browser Toolbox]: https://developer.mozilla.org/en-US/docs/Tools/Browser_Toolbox [WebDriver conformance]: https://wpt.fyi/results/webdriver/tests?label=experimental [`webSocketUrl`]: https://developer.mozilla.org/en-US/docs/Web/WebDriver/Capabilities/webSocketUrl [`moz:firefoxOptions`]: https://developer.mozilla.org/en-US/docs/Web/WebDriver/Capabilities/firefoxOptions [`moz:debuggerAddress`]: https://firefox-source-docs.mozilla.org/testing/geckodriver/Capabilities.html#moz-debuggeraddress [Microsoft Visual Studio redistributable runtime]: https://support.microsoft.com/en-us/help/2977003/the-latest-supported-visual-c-downloads [GeckoView]: https://wiki.mozilla.org/Mobile/GeckoView [Fission]: https://wiki.mozilla.org/Project_Fission [Capabilities]: https://firefox-source-docs.mozilla.org/testing/geckodriver/Capabilities.html [Flags]: https://firefox-source-docs.mozilla.org/testing/geckodriver/Flags.html [`--allow-hosts`]: https://firefox-source-docs.mozilla.org/testing/geckodriver/Flags.html#code-allow-hosts-var-allow-hosts-var-code [`--allow-origins`]: https://firefox-source-docs.mozilla.org/testing/geckodriver/Flags.html#code-allow-origins-var-allow-origins-var-code [enable remote debugging on the Android device]: https://developers.google.com/web/tools/chrome-devtools/remote-debugging [macOS notarization]: https://firefox-source-docs.mozilla.org/testing/geckodriver/Notarization.html [Rust]: https://rustup.rs/ [mozilla.org] https://www.mozilla.org/firefox/ [`CloseWindowResponse`]: https://docs.rs/webdriver/newest/webdriver/response/struct.CloseWindowResponse.html [`CookieResponse`]: https://docs.rs/webdriver/newest/webdriver/response/struct.CookieResponse.html [`DeleteSession`]: https://docs.rs/webdriver/newest/webdriver/command/enum.WebDriverCommand.html#variant.DeleteSession [`ElementClickIntercepted`]: https://docs.rs/webdriver/newest/webdriver/error/enum.ErrorStatus.html#variant.ElementClickIntercepted [`ElementNotInteractable`]: https://docs.rs/webdriver/newest/webdriver/error/enum.ErrorStatus.html#variant.ElementNotInteractable [`FullscreenWindow`]: https://docs.rs/webdriver/newest/webdriver/command/enum.WebDriverCommand.html#variant.FullscreenWindow [`GetNamedCookie`]: https://docs.rs/webdriver/newest/webdriver/command/enum.WebDriverCommand.html#variant.GetNamedCookie [`GetWindowRect`]: https://docs.rs/webdriver/newest/webdriver/command/enum.WebDriverCommand.html#variant.GetWindowRect [`InvalidCoordinates`]: https://docs.rs/webdriver/newest/webdriver/error/enum.ErrorStatus.html#variant.InvalidCoordinates [`MaximizeWindow`]: https://docs.rs/webdriver/newest/webdriver/command/enum.WebDriverCommand.html#variant.MaximizeWindow [`MinimizeWindow`]: https://docs.rs/webdriver/newest/webdriver/command/enum.WebDriverCommand.html#variant.MinimizeWindow [`NewSession`]: https://docs.rs/webdriver/newest/webdriver/command/enum.WebDriverCommand.html#variant.NewSession [`NoSuchCookie`]: https://docs.rs/webdriver/newest/webdriver/error/enum.ErrorStatus.html#variant.NoSuchCookie [`RectResponse`]: https://docs.rs/webdriver/0.27.0/webdriver/response/struct.RectResponse.html [`SendKeysParameters`]: https://docs.rs/webdriver/newest/webdriver/command/struct.SendKeysParameters.html [`SessionNotCreated`]: https://docs.rs/webdriver/newest/webdriver/error/enum.ErrorStatus.html#variant.SessionNotCreated [`SetTimeouts`]: https://docs.rs/webdriver/newest/webdriver/command/enum.WebDriverCommand.html#variant.SetTimeouts [`SetWindowRect`]: https://docs.rs/webdriver/newest/webdriver/command/enum.WebDriverCommand.html#variant.SetWindowRect [`StaleElementReference`]: https://docs.rs/webdriver/newest/webdriver/error/enum.ErrorStatus.html#variant.StaleElementReference [`UnableToCaptureScreen`]: https://docs.rs/webdriver/newest/webdriver/error/enum.ErrorStatus.html#variant.UnableToCaptureScreen [`UnknownCommand`]: https://docs.rs/webdriver/newest/webdriver/error/enum.ErrorStatus.html#variant.UnknownCommand [`UnknownError`]: https://docs.rs/webdriver/newest/webdriver/error/enum.ErrorStatus.html#variant.UnknownError [`WindowRectParameters`]: https://docs.rs/webdriver/newest/webdriver/command/struct.WindowRectParameters.html [Add Cookie]: https://developer.mozilla.org/en-US/docs/Web/WebDriver/Commands/AddCookie [invalid argument]: https://developer.mozilla.org/en-US/docs/Web/WebDriver/Errors/InvalidArgument [invalid session id]: https://developer.mozilla.org/en-US/docs/Web/WebDriver/Errors/InvalidSessionID [script timeout]: https://developer.mozilla.org/en-US/docs/Web/WebDriver/Errors/ScriptTimeout [timeout]: https://developer.mozilla.org/en-US/docs/Web/WebDriver/Errors/Timeout [timeout object]: https://developer.mozilla.org/en-US/docs/Web/WebDriver/Timeouts [`platformName` capability]: https://developer.mozilla.org/en-US/docs/Web/WebDriver/Capabilities#platformName [hyper]: https://hyper.rs/ [mozrunner crate]: https://crates.io/crates/mozrunner [serde]: https://serde.rs/ [webdriver crate]: https://crates.io/crates/webdriver [Actions]: https://w3c.github.io/webdriver/webdriver-spec.html#actions [Delete Session]: https://w3c.github.io/webdriver/webdriver-spec.html#delete-session [Element Click]: https://w3c.github.io/webdriver/webdriver-spec.html#element-click [Get Element Shadow Root]: https://w3c.github.io/webdriver/#get-element-shadow-root [Get Timeouts]: https://w3c.github.io/webdriver/webdriver-spec.html#get-timeouts [Get Window Rect]: https://w3c.github.io/webdriver/webdriver-spec.html#get-window-rect [insecure certificate]: https://w3c.github.io/webdriver/webdriver-spec.html#dfn-insecure-certificate [Minimize Window]: https://w3c.github.io/webdriver/webdriver-spec.html#minimize-window [New Session]: https://w3c.github.io/webdriver/webdriver-spec.html#new-session [New Window]: https://developer.mozilla.org/en-US/docs/Web/WebDriver/Commands/New_Window [Print]: https://w3c.github.io/webdriver/webdriver-spec.html#print [Send Alert Text]: https://w3c.github.io/webdriver/webdriver-spec.html#send-alert-text [Set Timeouts]: https://w3c.github.io/webdriver/webdriver-spec.html#set-timeouts [Set Window Rect]: https://w3c.github.io/webdriver/webdriver-spec.html#set-window-rect [Status]: https://w3c.github.io/webdriver/webdriver-spec.html#status [Take Element Screenshot]: https://w3c.github.io/webdriver/webdriver-spec.html#take-element-screenshot [WebDriver errors]: https://w3c.github.io/webdriver/webdriver-spec.html#handling-errors [Bastien Orivel]: https://github.com/Eijebong [David Burns]: https://github.com/AutomatedTester [Jason Juang]: https://github.com/juangj [Jeremy Lempereur]: https://github.com/o0Ignition0o [Kalpesh Krishna]: https://github.com/martiansideofthemoon [Kriti Singh]: https://github.com/kritisingh1 [Mike Pennisi]: https://github.com/jugglinmike [Nupur Baghel]: https://github.com/nupurbaghel [Peter Major]: https://github.com/aldaris [Shivam Singhal]: https://github.com/championshuttler [Sven Jost]: https://github/mythsunwind [Vlad Filippov]: https://github.com/vladikoff [Olivier Tilloy]: https://github.com/oSoMoN