mozilla
/
gecko-dev
зеркало из https://github.com/mozilla/gecko-dev.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
gecko-dev/htmlparser/src/nsHTMLTokenizer.cpp

1080 строки
34 KiB
C++
Исходник Ответственный История

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
* Version: NPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Netscape Public License
* Version 1.1 (the "License"); you may not use this file except in
* compliance with the License. You may obtain a copy of the License at
* http://www.mozilla.org/NPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is mozilla.org code.
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1998
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
*
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the NPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the NPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
/**
* MODULE NOTES:
* @update gess 4/1/98
*
*/
#include "nsHTMLTokenizer.h"
#include "nsScanner.h"
#include "nsElementTable.h"
#include "nsHTMLEntities.h"
#include "CParserContext.h"
#include "nsReadableUtils.h"
#include "nsUnicharUtils.h"
/************************************************************************
And now for the main class -- nsHTMLTokenizer...
************************************************************************/
static NS_DEFINE_IID(kISupportsIID, NS_ISUPPORTS_IID);
static NS_DEFINE_IID(kITokenizerIID, NS_ITOKENIZER_IID);
static NS_DEFINE_IID(kClassIID, NS_HTMLTOKENIZER_IID);
/**
* This method gets called as part of our COM-like interfaces.
* Its purpose is to create an interface to parser object
* of some type.
*
* @update gess 4/8/98
* @param nsIID id of object to discover
* @param aInstancePtr ptr to newly discovered interface
* @return NS_xxx result code
*/
nsresult nsHTMLTokenizer::QueryInterface(const nsIID& aIID, void** aInstancePtr)
{
if (NULL == aInstancePtr) {
return NS_ERROR_NULL_POINTER;
}
if(aIID.Equals(kISupportsIID)) { //do IUnknown...
*aInstancePtr = (nsISupports*)(this);
}
else if(aIID.Equals(kITokenizerIID)) { //do IParser base class...
*aInstancePtr = (nsITokenizer*)(this);
}
else if(aIID.Equals(kClassIID)) { //do this class...
*aInstancePtr = (nsHTMLTokenizer*)(this);
}
else {
*aInstancePtr=0;
return NS_NOINTERFACE;
}
NS_ADDREF_THIS();
return NS_OK;
}
/**
* This method is defined in nsHTMLTokenizer.h. It is used to
* cause the COM-like construction of an HTMLTokenizer.
*
* @update gess 4/8/98
* @param nsIParser** ptr to newly instantiated parser
* @return NS_xxx error result
*/
nsresult NS_NewHTMLTokenizer(nsITokenizer** aInstancePtrResult,
PRInt32 aFlag,
eParserDocType aDocType,
eParserCommands aCommand)
{
NS_PRECONDITION(nsnull != aInstancePtrResult, "null ptr");
if (nsnull == aInstancePtrResult) {
return NS_ERROR_NULL_POINTER;
}
nsHTMLTokenizer* it = new nsHTMLTokenizer(aFlag,aDocType,aCommand);
if (nsnull == it) {
return NS_ERROR_OUT_OF_MEMORY;
}
return it->QueryInterface(kClassIID, (void **) aInstancePtrResult);
}
NS_IMPL_ADDREF(nsHTMLTokenizer)
NS_IMPL_RELEASE(nsHTMLTokenizer)
/**
* Default constructor
*
* @update gess 4/9/98
* @param
* @return
*/
nsHTMLTokenizer::nsHTMLTokenizer(PRInt32 aParseMode,
eParserDocType aDocType,
eParserCommands aCommand) :
nsITokenizer(), mTokenDeque(0)
{
NS_INIT_REFCNT();
if (aParseMode==eDTDMode_strict) {
mFlags = NS_IPARSER_FLAG_STRICT_MODE;
}
else if (aParseMode==eDTDMode_quirks) {
mFlags = NS_IPARSER_FLAG_QUIRKS_MODE;
}
else if (aParseMode==eDTDMode_autodetect) {
mFlags = NS_IPARSER_FLAG_AUTO_DETECT_MODE;
}
else {
mFlags = NS_IPARSER_FLAG_UNKNOWN_MODE;
}
if (aDocType==ePlainText) {
mFlags |= NS_IPARSER_FLAG_PLAIN_TEXT;
}
else if (aDocType==eXML) {
mFlags |= NS_IPARSER_FLAG_XML;
}
else if (aDocType==eHTML_Quirks ||
aDocType==eHTML3_Quirks ||
aDocType==eHTML_Strict) {
mFlags |= NS_IPARSER_FLAG_HTML;
}
mFlags |= (aCommand==eViewSource)? NS_IPARSER_FLAG_VIEW_SOURCE:NS_IPARSER_FLAG_VIEW_NORMAL;
mRecordTrailingContent=PR_FALSE;
mTokenAllocator=nsnull;
mTokenScanPos=0;
}
/**
* Destructor
*
* @update gess 4/9/98
* @param
* @return
*/
nsHTMLTokenizer::~nsHTMLTokenizer(){
if(mTokenDeque.GetSize()){
CTokenDeallocator theDeallocator(mTokenAllocator->GetArenaPool());
mTokenDeque.ForEach(theDeallocator);
}
}
/*******************************************************************
Here begins the real working methods for the tokenizer.
*******************************************************************/
void nsHTMLTokenizer::AddToken(CToken*& aToken,nsresult aResult,nsDeque* aDeque,nsTokenAllocator* aTokenAllocator) {
if(aToken && aDeque) {
if(NS_SUCCEEDED(aResult)) {
aDeque->Push(aToken);
}
else {
IF_FREE(aToken, aTokenAllocator);
}
}
}
/**
* Retrieve a ptr to the global token recycler...
* @update gess8/4/98
* @return ptr to recycler (or null)
*/
nsTokenAllocator* nsHTMLTokenizer::GetTokenAllocator(void) {
return mTokenAllocator;
}
/**
* This method provides access to the topmost token in the tokenDeque.
* The token is not really removed from the list.
* @update gess8/2/98
* @return ptr to token
*/
CToken* nsHTMLTokenizer::PeekToken() {
return (CToken*)mTokenDeque.PeekFront();
}
/**
* This method provides access to the topmost token in the tokenDeque.
* The token is really removed from the list; if the list is empty we return 0.
* @update gess8/2/98
* @return ptr to token or NULL
*/
CToken* nsHTMLTokenizer::PopToken() {
CToken* result=nsnull;
result=(CToken*)mTokenDeque.PopFront();
return result;
}
/**
*
* @update gess8/2/98
* @param
* @return
*/
CToken* nsHTMLTokenizer::PushTokenFront(CToken* theToken) {
mTokenDeque.PushFront(theToken);
return theToken;
}
/**
*
* @update gess8/2/98
* @param
* @return
*/
CToken* nsHTMLTokenizer::PushToken(CToken* theToken) {
mTokenDeque.Push(theToken);
return theToken;
}
/**
*
* @update gess12/29/98
* @param
* @return
*/
PRInt32 nsHTMLTokenizer::GetCount(void) {
return mTokenDeque.GetSize();
}
/**
*
* @update gess12/29/98
* @param
* @return
*/
CToken* nsHTMLTokenizer::GetTokenAt(PRInt32 anIndex){
return (CToken*)mTokenDeque.ObjectAt(anIndex);
}
/**
* @update gess 12/29/98
* @update harishd 08/04/00
* @param
* @return
*/
nsresult nsHTMLTokenizer::WillTokenize(PRBool aIsFinalChunk,nsTokenAllocator* aTokenAllocator)
{
mTokenAllocator=aTokenAllocator;
mIsFinalChunk=aIsFinalChunk;
mTokenScanPos=mTokenDeque.GetSize()+1; //cause scanDocStructure to search from here for new tokens...
return NS_OK;
}
/**
*
* @update gess12/29/98
* @param
* @return
*/
void nsHTMLTokenizer::PrependTokens(nsDeque& aDeque){
PRInt32 aCount=aDeque.GetSize();
//last but not least, let's check the misplaced content list.
//if we find it, then we have to push it all into the body before continuing...
PRInt32 anIndex=0;
for(anIndex=0;anIndex<aCount;anIndex++){
CToken* theToken=(CToken*)aDeque.Pop();
PushTokenFront(theToken);
}
}
/**
* This is a utilty method for ScanDocStructure, which finds a given
* tag in the stack.
*
* @update gess 08/30/00
* @param aTag -- the ID of the tag we're seeking
* @param aTagStack -- the stack to be searched
* @return index pos of tag in stack if found, otherwise kNotFound
*/
static PRInt32 FindLastIndexOfTag(eHTMLTags aTag,nsDeque &aTagStack) {
PRInt32 theCount=aTagStack.GetSize();
while(0<theCount) {
CHTMLToken *theToken=(CHTMLToken*)aTagStack.ObjectAt(--theCount);
if(theToken) {
eHTMLTags theTag=(eHTMLTags)theToken->GetTypeID();
if(theTag==aTag) {
return theCount;
}
}
}
return kNotFound;
}
/**
* This method scans the sequence of tokens to determine the
* well formedness of each tag structure. This is used to
* disable residual-style handling in well formed cases.
*
* @update gess 1Sep2000
* @param
* @return
*/
nsresult nsHTMLTokenizer::ScanDocStructure(PRBool aFinalChunk) {
nsresult result=NS_OK;
CHTMLToken *theRootToken=0;
//*** start by finding the first start tag that hasn't been reviewed.
while(mTokenScanPos>0) {
theRootToken=(CHTMLToken*)mTokenDeque.ObjectAt(mTokenScanPos);
if(theRootToken) {
eHTMLTokenTypes theType=eHTMLTokenTypes(theRootToken->GetTokenType());
if(eToken_start==theType) {
if(eFormUnknown==theRootToken->GetContainerInfo()) {
break;
}
}
}
mTokenScanPos--;
}
/*----------------------------------------------------------------------
* Now that we know where to start, let's walk through the
* tokens to see which are well-formed. Stop when you run out
* of fresh tokens.
*---------------------------------------------------------------------*/
theRootToken=(CHTMLToken*)mTokenDeque.ObjectAt(mTokenScanPos); //init to root
nsDeque theStack(0);
eHTMLTags theRootTag=eHTMLTag_unknown;
CHTMLToken *theToken=theRootToken; //init to root
PRInt32 theStackDepth=0;
static const PRInt32 theMaxStackDepth=200; //dont bother if we get ridiculously deep.
while(theToken && (theStackDepth<theMaxStackDepth)) {
eHTMLTokenTypes theType=eHTMLTokenTypes(theToken->GetTokenType());
eHTMLTags theTag=(eHTMLTags)theToken->GetTypeID();
PRBool theTagIsContainer=nsHTMLElement::IsContainer(theTag); //bug54117...
if(theTagIsContainer) {
PRBool theTagIsBlock=gHTMLElements[theTag].IsMemberOf(kBlockEntity);
PRBool theTagIsInline= (theTagIsBlock) ? PR_FALSE : gHTMLElements[theTag].IsMemberOf(kInlineEntity);
if(theTagIsBlock || theTagIsInline || (eHTMLTag_table==theTag)) {
switch(theType) {
case eToken_start:
if(0==theStack.GetSize()) {
//track the tag on the top of the stack...
theRootToken=theToken;
theRootTag=theTag;
}
theStack.Push(theToken);
theStackDepth++;
break;
case eToken_end:
{
CHTMLToken *theLastToken= NS_STATIC_CAST(CHTMLToken*, theStack.Peek());
if(theLastToken) {
if(theTag==theLastToken->GetTypeID()) {
theStack.Pop(); //yank it for real
theStackDepth--;
theLastToken->SetContainerInfo(eWellFormed);
//in addition, let's look above this container to see if we can find
//any tags that are already marked malformed. If so, pop them too!
theLastToken= NS_STATIC_CAST(CHTMLToken*, theStack.Peek());
while(theLastToken) {
if(eMalformed==theRootToken->GetContainerInfo()) {
theStack.Pop(); //yank the malformed token for real.
theLastToken= NS_STATIC_CAST(CHTMLToken*, theStack.Peek());
continue;
}
break;
}
}
else {
//the topmost token isn't what we expected, so that container must
//be malformed. If the tag is a block, we don't really care (but we'll
//mark it anyway). If it's an inline we DO care, especially if the
//inline tried to contain a block (that's when RS handling kicks in).
if(theTagIsInline) {
PRInt32 theIndex=FindLastIndexOfTag(theTag,theStack);
if(kNotFound!=theIndex) {
theToken=(CHTMLToken*)theStack.ObjectAt(theIndex);
theToken->SetContainerInfo(eMalformed);
}
//otherwise we ignore an out-of-place end tag.
}
else {
}
}
}
}
break;
default:
break;
} //switch
}
}
theToken=(CHTMLToken*)mTokenDeque.ObjectAt(++mTokenScanPos);
}
return result;
}
nsresult nsHTMLTokenizer::DidTokenize(PRBool aFinalChunk) {
return ScanDocStructure(aFinalChunk);
}
/**
* This method repeatedly called by the tokenizer.
* Each time, we determine the kind of token were about to
* read, and then we call the appropriate method to handle
* that token type.
*
* @update gess 3/25/98
* @param aChar: last char read
* @param aScanner: see nsScanner.h
* @param anErrorCode: arg that will hold error condition
* @return new token or null
*/
nsresult nsHTMLTokenizer::ConsumeToken(nsScanner& aScanner,PRBool& aFlushTokens) {
PRUnichar theChar;
CToken* theToken=0;
nsresult result=aScanner.Peek(theChar);
switch(result) {
case kEOF:
//We convert from eof to complete here, because we never really tried to get data.
//All we did was try to see if data was available, which it wasn't.
//It's important to return process complete, so that controlling logic can know that
//everything went well, but we're done with token processing.
return result;
case NS_OK:
default:
if(!(mFlags & NS_IPARSER_FLAG_PLAIN_TEXT)) {
if(kLessThan==theChar) {
return ConsumeTag(theChar,theToken,aScanner,aFlushTokens);
}
else if(kAmpersand==theChar){
return ConsumeEntity(theChar,theToken,aScanner);
}
}
if((kCR==theChar) || (kLF==theChar)) {
return ConsumeNewline(theChar,theToken,aScanner);
}
else {
if(!nsCRT::IsAsciiSpace(theChar)) {
if(theChar!=nsnull) {
result=ConsumeText(theToken,aScanner);
}
else {
aScanner.GetChar(theChar); // skip the embedded null char. Fix bug 64098.
}
break;
}
result=ConsumeWhitespace(theChar,theToken,aScanner);
}
break;
} //switch
return result;
}
/**
* This method is called just after a "<" has been consumed
* and we know we're at the start of some kind of tagged
* element. We don't know yet if it's a tag or a comment.
*
* @update gess 5/12/98
* @param aChar is the last char read
* @param aScanner is represents our input source
* @param aToken is the out arg holding our new token
* @return error code.
*/
nsresult nsHTMLTokenizer::ConsumeTag(PRUnichar aChar,CToken*& aToken,nsScanner& aScanner,PRBool& aFlushTokens) {
PRUnichar theNextChar, oldChar;
nsresult result=aScanner.Peek(aChar,1);
if(NS_OK==result) {
switch(aChar) {
case kForwardSlash:
// Get the original "<" (we've already seen it with a Peek)
aScanner.GetChar(oldChar);
result=aScanner.Peek(theNextChar, 1);
if(NS_OK==result) {
// xml allow non ASCII tag name, consume as end tag. need to make xml view source work
PRBool isXML=(mFlags & NS_IPARSER_FLAG_XML);
if(nsCRT::IsAsciiAlpha(theNextChar)||(kGreaterThan==theNextChar)||
(isXML && (! nsCRT::IsAscii(theNextChar)))) {
result=ConsumeEndTag(aChar,aToken,aScanner);
}
else result=ConsumeComment(aChar,aToken,aScanner);
}//if
break;
case kExclamation:
// Get the original "<" (we've already seen it with a Peek)
aScanner.GetChar(oldChar);
result=aScanner.Peek(theNextChar, 1);
if(NS_OK==result) {
if((kMinus==theNextChar) || (kGreaterThan==theNextChar)) {
result=ConsumeComment(aChar,aToken,aScanner);
}
else
result=ConsumeSpecialMarkup(aChar,aToken,aScanner);
}
break;
case kQuestionMark: //it must be an XML processing instruction...
// Get the original "<" (we've already seen it with a Peek)
aScanner.GetChar(oldChar);
result=ConsumeProcessingInstruction(aChar,aToken,aScanner);
break;
default:
if(nsCRT::IsAsciiAlpha(aChar)) {
// Get the original "<" (we've already seen it with a Peek)
aScanner.GetChar(oldChar);
result=ConsumeStartTag(aChar,aToken,aScanner,aFlushTokens);
}
else {
// We are not dealing with a tag. So, don't consume the original
// char and leave the decision to ConsumeText().
result=ConsumeText(aToken,aScanner);
}
} //switch
} //if
return result;
}
/**
* This method is called just after we've consumed a start
* tag, and we now have to consume its attributes.
*
* @update rickg 03.23.2000
* @param aChar: last char read
* @param aScanner: see nsScanner.h
* @param aLeadingWS: contains ws chars that preceeded the first attribute
* @return
*/
nsresult nsHTMLTokenizer::ConsumeAttributes(PRUnichar aChar,CStartToken* aToken,nsScanner& aScanner) {
PRBool done=PR_FALSE;
nsresult result=NS_OK;
PRInt16 theAttrCount=0;
nsTokenAllocator* theAllocator=this->GetTokenAllocator();
while((!done) && (result==NS_OK)) {
CAttributeToken* theToken= NS_STATIC_CAST(CAttributeToken*, theAllocator->CreateTokenOfType(eToken_attribute,eHTMLTag_unknown));
if(theToken){
result=theToken->Consume(aChar,aScanner,mFlags); //tell new token to finish consuming text...
//Much as I hate to do this, here's some special case code.
//This handles the case of empty-tags in XML. Our last
//attribute token will come through with a text value of ""
//and a textkey of "/". We should destroy it, and tell the
//start token it was empty.
if(NS_SUCCEEDED(result)) {
PRBool isUsableAttr=PR_TRUE;
const nsAReadableString& key=theToken->GetKey();
const nsAReadableString& text=theToken->GetValue();
// support XML like syntax to fix bugs like 44186
if(!key.IsEmpty() && kForwardSlash==key.First() && text.IsEmpty()) {
aToken->SetEmpty(PR_TRUE);
isUsableAttr = (mFlags & NS_IPARSER_FLAG_VIEW_SOURCE)? PR_TRUE:PR_FALSE; // Fix bug 103095
}
if(isUsableAttr) {
theAttrCount++;
AddToken((CToken*&)theToken,result,&mTokenDeque,theAllocator);
}
else {
IF_FREE(theToken, mTokenAllocator);
}
}
else { //if(NS_ERROR_HTMLPARSER_BADATTRIBUTE==result){
aToken->SetEmpty(PR_TRUE);
IF_FREE(theToken, mTokenAllocator);
if(NS_ERROR_HTMLPARSER_BADATTRIBUTE==result)
result=NS_OK;
}
}//if
if(NS_SUCCEEDED(result)){
result=aScanner.SkipWhitespace();
if(NS_SUCCEEDED(result)) {
result=aScanner.Peek(aChar);
if(NS_SUCCEEDED(result)) {
if(aChar==kGreaterThan) { //you just ate the '>'
aScanner.GetChar(aChar); //skip the '>'
done=PR_TRUE;
}
else if(aChar==kLessThan) {
done=PR_TRUE;
}
}//if
}
}//if
}//while
aToken->SetAttributeCount(theAttrCount);
return result;
}
/**
* In the case that we just read the given tag, we should go and
* consume all the input until we find a matching end tag.
* @update gess12/28/98
* @param
* @return
*/
nsresult nsHTMLTokenizer::ConsumeScriptContent(nsScanner& aScanner,CToken*& aToken) {
nsresult result=NS_OK;
return result;
}
/**
*
* @update gess12/28/98
* @param
* @return
*/
nsresult nsHTMLTokenizer::ConsumeStartTag(PRUnichar aChar,CToken*& aToken,nsScanner& aScanner,PRBool& aFlushTokens) {
PRInt32 theDequeSize=mTokenDeque.GetSize(); //remember this for later in case you have to unwind...
nsresult result=NS_OK;
nsTokenAllocator* theAllocator=this->GetTokenAllocator();
aToken=theAllocator->CreateTokenOfType(eToken_start,eHTMLTag_unknown);
if(aToken) {
// Save the position after '<' for use in recording traling contents. Ref: Bug. 15204.
nsReadingIterator<PRUnichar> origin;
aScanner.CurrentPosition(origin);
result= aToken->Consume(aChar,aScanner,mFlags); //tell new token to finish consuming text...
if(NS_SUCCEEDED(result)) {
AddToken(aToken,result,&mTokenDeque,theAllocator);
eHTMLTags theTag=(eHTMLTags)aToken->GetTypeID();
//Good. Now, let's see if the next char is ">".
//If so, we have a complete tag, otherwise, we have attributes.
PRBool theTagHasAttributes=PR_FALSE;
nsReadingIterator<PRUnichar> start, end;
if(NS_OK==result) {
if (mFlags & NS_IPARSER_FLAG_VIEW_SOURCE) {
result = aScanner.ReadWhitespace(start, end);
}
else {
result = aScanner.SkipWhitespace();
}
aToken->mNewlineCount += aScanner.GetNewlinesSkipped();
if(NS_OK==result) {
result=aScanner.Peek(aChar);
if(NS_OK==result) {
if(kGreaterThan!=aChar) { //look for '>'
//push that char back, since we apparently have attributes...
theTagHasAttributes=PR_TRUE;
} //if
else {
aScanner.GetChar(aChar);
}
} //if
}//if
}
CStartToken* theStartToken=NS_STATIC_CAST(CStartToken*,aToken);
if(theTagHasAttributes) {
if (mFlags & NS_IPARSER_FLAG_VIEW_SOURCE) {
// Since we conserve whitespace in view-source mode,
// go back to the beginning of the whitespace section
// and let the first attribute grab it.
aScanner.SetPosition(start, PR_FALSE, PR_TRUE);
}
result=ConsumeAttributes(aChar,theStartToken,aScanner);
}
/* Now that that's over with, we have one more problem to solve.
In the case that we just read a <SCRIPT> or <STYLE> tags, we should go and
consume all the content itself.
*/
if(NS_SUCCEEDED(result)) {
//XXX - Find a better soution to record content
//Added _plaintext to fix bug 46054.
if((theTag == eHTMLTag_textarea ||
theTag == eHTMLTag_xmp ||
theTag == eHTMLTag_plaintext ||
theTag == eHTMLTag_noscript ||
theTag == eHTMLTag_noframes) &&
!mRecordTrailingContent) {
mRecordTrailingContent=PR_TRUE;
}
if(mRecordTrailingContent)
RecordTrailingContent(theStartToken,aScanner,origin);
//if((eHTMLTag_style==theTag) || (eHTMLTag_script==theTag)) {
if(gHTMLElements[theTag].CanContainType(kCDATA)) {
nsAutoString endTagName;
endTagName.Assign(nsHTMLTags::GetStringValue(theTag));
CToken* text=theAllocator->CreateTokenOfType(eToken_text,eHTMLTag_text);
CTextToken* textToken=NS_STATIC_CAST(CTextToken*,text);
result=textToken->ConsumeUntil(0,theTag!=eHTMLTag_script,aScanner,endTagName,mFlags,aFlushTokens); //tell new token to finish consuming text...
// Fix bug 44186
// Support XML like syntax, i.e., <script src="external.js"/> == <script src="external.js"></script>
// Note: if aFlushTokens is TRUE then we have seen an </script>
if(!theStartToken->IsEmpty() || aFlushTokens) {
theStartToken->SetEmpty(PR_FALSE); // Setting this would make cases like <script/>d.w("text");</script> work.
CToken* endToken=theAllocator->CreateTokenOfType(eToken_end,theTag,endTagName);
AddToken(text,result,&mTokenDeque,theAllocator);
AddToken(endToken,result,&mTokenDeque,theAllocator);
}
else {
IF_FREE(text, mTokenAllocator);
}
}
}
//EEEEECCCCKKKK!!!
//This code is confusing, so pay attention.
//If you're here, it's because we were in the midst of consuming a start
//tag but ran out of data (not in the stream, but in this *part* of the stream.
//For simplicity, we have to unwind our input. Therefore, we pop and discard
//any new tokens we've cued this round. Later we can get smarter about this.
if(NS_FAILED(result)) {
while(mTokenDeque.GetSize()>theDequeSize) {
CToken* theToken=(CToken*)mTokenDeque.Pop();
IF_FREE(theToken, mTokenAllocator);
}
}
} //if
else IF_FREE(aToken, mTokenAllocator);
} //if
return result;
}
/**
*
* @update gess12/28/98
* @param
* @return
*/
nsresult nsHTMLTokenizer::ConsumeEndTag(PRUnichar aChar,CToken*& aToken,nsScanner& aScanner) {
// Get the "/" (we've already seen it with a Peek)
aScanner.GetChar(aChar);
nsTokenAllocator* theAllocator=this->GetTokenAllocator();
aToken=theAllocator->CreateTokenOfType(eToken_end,eHTMLTag_unknown);
nsresult result=NS_OK;
if(aToken) {
result= aToken->Consume(aChar,aScanner,mFlags); //tell new token to finish consuming text...
AddToken(aToken,result,&mTokenDeque,theAllocator);
if(NS_SUCCEEDED(result)) {
eHTMLTags theTag=(eHTMLTags)aToken->GetTypeID();
if((theTag == eHTMLTag_textarea ||
theTag == eHTMLTag_xmp ||
theTag == eHTMLTag_plaintext ||
theTag == eHTMLTag_noscript ||
theTag == eHTMLTag_noframes) &&
mRecordTrailingContent) {
mRecordTrailingContent=PR_FALSE;
}
}
} //if
return result;
}
/**
* This method is called just after a "&" has been consumed
* and we know we're at the start of an entity.
*
* @update gess 3/25/98
* @param aChar: last char read
* @param aScanner: see nsScanner.h
* @param anErrorCode: arg that will hold error condition
* @return new token or null
*/
nsresult nsHTMLTokenizer::ConsumeEntity(PRUnichar aChar,CToken*& aToken,nsScanner& aScanner) {
PRUnichar theChar;
nsresult result=aScanner.Peek(theChar, 1);
nsTokenAllocator* theAllocator=this->GetTokenAllocator();
if (NS_SUCCEEDED(result)) {
if (nsCRT::IsAsciiAlpha(theChar) || theChar==kHashsign) {
aToken = theAllocator->CreateTokenOfType(eToken_entity,eHTMLTag_entity);
result=aToken->Consume(theChar,aScanner,mFlags);
if (result == NS_HTMLTOKENS_NOT_AN_ENTITY) {
IF_FREE(aToken, mTokenAllocator);
}
else {
if (mIsFinalChunk && result == kEOF) {
result=NS_OK; //use as much of the entity as you can get.
}
AddToken(aToken,result,&mTokenDeque,theAllocator);
return result;
}
}
// oops, we're actually looking at plain text...
result = ConsumeText(aToken,aScanner);
}//if
return result;
}
/**
* This method is called just after whitespace has been
* consumed and we know we're at the start a whitespace run.
*
* @update gess 3/25/98
* @param aChar: last char read
* @param aScanner: see nsScanner.h
* @param anErrorCode: arg that will hold error condition
* @return new token or null
*/
nsresult nsHTMLTokenizer::ConsumeWhitespace(PRUnichar aChar,CToken*& aToken,nsScanner& aScanner) {
// Get the whitespace character
aScanner.GetChar(aChar);
nsTokenAllocator* theAllocator=this->GetTokenAllocator();
aToken = theAllocator->CreateTokenOfType(eToken_whitespace,eHTMLTag_whitespace);
nsresult result=NS_OK;
if(aToken) {
result=aToken->Consume(aChar,aScanner,mFlags);
AddToken(aToken,result,&mTokenDeque,theAllocator);
}
return result;
}
/**
* This method is called just after a "<!" has been consumed
* and we know we're at the start of a comment.
*
* @update gess 3/25/98
* @param aChar: last char read
* @param aScanner: see nsScanner.h
* @param anErrorCode: arg that will hold error condition
* @return new token or null
*/
nsresult nsHTMLTokenizer::ConsumeComment(PRUnichar aChar,CToken*& aToken,nsScanner& aScanner){
// Get the "!"
aScanner.GetChar(aChar);
nsTokenAllocator* theAllocator=this->GetTokenAllocator();
aToken = theAllocator->CreateTokenOfType(eToken_comment,eHTMLTag_comment);
nsresult result=NS_OK;
if(aToken) {
result=aToken->Consume(aChar,aScanner,mFlags);
AddToken(aToken,result,&mTokenDeque,theAllocator);
}
return result;
}
/**
* This method is called just after a known text char has
* been consumed and we should read a text run.
*
* @update gess 3/25/98
* @param aChar: last char read
* @param aScanner: see nsScanner.h
* @param anErrorCode: arg that will hold error condition
* @return new token or null
*/
nsresult nsHTMLTokenizer::ConsumeText(CToken*& aToken,nsScanner& aScanner){
nsresult result=NS_OK;
nsTokenAllocator* theAllocator=this->GetTokenAllocator();
CTextToken* theToken = (CTextToken*)theAllocator->CreateTokenOfType(eToken_text,eHTMLTag_text);
if(theToken) {
PRUnichar ch=0;
result=theToken->Consume(ch,aScanner,mFlags);
if(NS_FAILED(result)) {
if(0==theToken->GetTextLength()){
IF_FREE(aToken, mTokenAllocator);
aToken = nsnull;
}
else result=NS_OK;
}
aToken = theToken;
AddToken(aToken,result,&mTokenDeque,theAllocator);
}
return result;
}
/**
* This method is called just after a "<!" has been consumed.
* NOTE: Here we might consume DOCTYPE and "special" markups.
*
*
* @update harishd 09/02/99
* @param aChar: last char read
* @param aScanner: see nsScanner.h
* @param anErrorCode: arg that will hold error condition
* @return new token or null
*/
nsresult nsHTMLTokenizer::ConsumeSpecialMarkup(PRUnichar aChar,CToken*& aToken,nsScanner& aScanner){
// Get the "!"
aScanner.GetChar(aChar);
nsresult result=NS_OK;
nsAutoString theBufCopy;
aScanner.Peek(theBufCopy, 20);
ToUpperCase(theBufCopy);
PRInt32 theIndex=theBufCopy.Find("DOCTYPE");
nsTokenAllocator* theAllocator=this->GetTokenAllocator();
if(theIndex==kNotFound) {
if('['==theBufCopy.CharAt(0)) {
aToken = theAllocator->CreateTokenOfType(eToken_cdatasection,eHTMLTag_comment);
} else if (Substring(theBufCopy, 0, 7).Equals(NS_LITERAL_STRING("ELEMENT")) ||
Substring(theBufCopy, 0, 7).Equals(NS_LITERAL_STRING("ATTLIST")) ||
Substring(theBufCopy, 0, 6).Equals(NS_LITERAL_STRING("ENTITY")) ||
Substring(theBufCopy, 0, 8).Equals(NS_LITERAL_STRING("NOTATION"))) {
aToken = theAllocator->CreateTokenOfType(eToken_markupDecl,eHTMLTag_markupDecl);
} else {
aToken = theAllocator->CreateTokenOfType(eToken_comment,eHTMLTag_comment);
}
}
else
aToken = theAllocator->CreateTokenOfType(eToken_doctypeDecl,eHTMLTag_doctypeDecl);
if(aToken) {
result=aToken->Consume(aChar,aScanner,mFlags);
AddToken(aToken,result,&mTokenDeque,theAllocator);
}
return result;
}
/**
* This method is called just after a newline has been consumed.
*
* @update gess 3/25/98
* @param aChar: last char read
* @param aScanner: see nsScanner.h
* @param aToken is the newly created newline token that is parsing
* @return error code
*/
nsresult nsHTMLTokenizer::ConsumeNewline(PRUnichar aChar,CToken*& aToken,nsScanner& aScanner){
// Get the newline character
aScanner.GetChar(aChar);
nsTokenAllocator* theAllocator=this->GetTokenAllocator();
aToken=theAllocator->CreateTokenOfType(eToken_newline,eHTMLTag_newline);
nsresult result=NS_OK;
if(aToken) {
result=aToken->Consume(aChar,aScanner,mFlags);
AddToken(aToken,result,&mTokenDeque,theAllocator);
}
return result;
}
/**
* This method is called just after a ? has been consumed.
*
* @update gess 3/25/98
* @param aChar: last char read
* @param aScanner: see nsScanner.h
* @param aToken is the newly created newline token that is parsing
* @return error code
*/
nsresult nsHTMLTokenizer::ConsumeProcessingInstruction(PRUnichar aChar,CToken*& aToken,nsScanner& aScanner){
// Get the "?"
aScanner.GetChar(aChar);
nsTokenAllocator* theAllocator=this->GetTokenAllocator();
aToken=theAllocator->CreateTokenOfType(eToken_instruction,eHTMLTag_unknown);
nsresult result=NS_OK;
if(aToken) {
result=aToken->Consume(aChar,aScanner,mFlags);
AddToken(aToken,result,&mTokenDeque,theAllocator);
}
return result;
}
/**
* This method keeps a copy of contents within the start token.
* The stored content could later be used in displaying TEXTAREA,
* and also in view source.
*
* @update harishd 11/09/99
* @param aStartToken: The token whose trailing contents are to be recorded
* @param aScanner: see nsScanner.h
*
*/
void nsHTMLTokenizer::RecordTrailingContent(CStartToken* aStartToken, nsScanner& aScanner, nsReadingIterator<PRUnichar> aOrigin) {
if(aStartToken) {
nsReadingIterator<PRUnichar> theCurrentPosition;
aScanner.CurrentPosition(theCurrentPosition);
nsString& trailingContent =aStartToken->mTrailingContent;
PRUint32 oldLength = trailingContent.Length();
trailingContent.SetLength(oldLength + Distance(aOrigin, theCurrentPosition));
nsWritingIterator<PRUnichar> beginWriting;
trailingContent.BeginWriting(beginWriting);
beginWriting.advance(oldLength);
copy_string( aOrigin, theCurrentPosition, beginWriting );
}
}
Ссылка в новой задаче Показать git blame Копировать постоянную ссылку