gecko-dev/netwerk/base/nsISocketTransport.idl

/* -*- Mode: IDL; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/* This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/. */

#include "nsITransport.idl"
#include "nsIRequest.idl"

interface nsIInterfaceRequestor;
interface nsINetAddr;

%{ C++
#include "mozilla/BasePrincipal.h"
namespace mozilla {
namespace net {
union NetAddr;
class TCPFastOpen;
}
}
%}
native NetAddr(mozilla::net::NetAddr);
[ptr] native NetAddrPtr(mozilla::net::NetAddr);
native OriginAttributes(mozilla::OriginAttributes);
[ref] native const_OriginAttributesRef(const mozilla::OriginAttributes);
[ptr] native TCPFastOpenPtr(mozilla::net::TCPFastOpen);

/**
 * nsISocketTransport
 *
 * NOTE: Connection setup is triggered by opening an input or output stream,
 * it does not start on its own. Completion of the connection setup is
 * indicated by a STATUS_CONNECTED_TO notification to the event sink (if set).
 *
 * NOTE: This is a free-threaded interface, meaning that the methods on
 * this interface may be called from any thread.
 */
[scriptable, builtinclass, uuid(79221831-85e2-43a8-8152-05d77d6fde31)]
interface nsISocketTransport : nsITransport
{
    /**
     * Get the peer's host for the underlying socket connection.
     * For Unix domain sockets, this is a pathname, or the empty string for
     * unnamed and abstract socket addresses.
     */
    readonly attribute AUTF8String host;

    /**
     * Get the port for the underlying socket connection.
     * For Unix domain sockets, this is zero.
     */
    readonly attribute long port;

    /**
     * The origin attributes are used to create sockets.  The first party domain
     * will eventually be used to isolate OCSP cache and is only non-empty when
     * "privacy.firstparty.isolate" is enabled.  Setting this is the only way to
     * carry origin attributes down to NSPR layers which are final consumers.
     * It must be set before the socket transport is built.
     */
    [implicit_jscontext, binaryname(ScriptableOriginAttributes)]
    attribute jsval originAttributes;

    [noscript, nostdcall, binaryname(GetOriginAttributes)]
    OriginAttributes binaryGetOriginAttributes();

    [noscript, nostdcall, binaryname(SetOriginAttributes)]
    void binarySetOriginAttributes(in const_OriginAttributesRef aOriginAttrs);

    /**
     * Returns the IP address of the socket connection peer. This
     * attribute is defined only once a connection has been established.
     */
    [noscript] NetAddr getPeerAddr();

    /**
     * Returns the IP address of the initiating end. This attribute
     * is defined only once a connection has been established.
     */
    [noscript] NetAddr getSelfAddr();

    /**
     * Bind to a specific local address.
     */
    [noscript] void bind(in NetAddrPtr aLocalAddr);

    /**
     * Returns a scriptable version of getPeerAddr. This attribute is defined
     * only once a connection has been established.
     */
    nsINetAddr getScriptablePeerAddr();

    /**
     * Returns a scriptable version of getSelfAddr. This attribute is defined
     * only once a connection has been established.
     */
    nsINetAddr getScriptableSelfAddr();

    /**
     * Security info object returned from the secure socket provider.  This
     * object supports nsISSLSocketControl, nsITransportSecurityInfo, and
     * possibly other interfaces.
     *
     * This attribute is only available once the socket is connected.
     */
    readonly attribute nsISupports securityInfo;

    /**
     * Security notification callbacks passed to the secure socket provider
     * via nsISSLSocketControl at socket creation time.
     *
     * NOTE: this attribute cannot be changed once a stream has been opened.
     */
    attribute nsIInterfaceRequestor securityCallbacks;

    /**
     * Test if this socket transport is (still) connected.
     */
    boolean isAlive();

    /**
     * Socket timeouts in seconds.  To specify no timeout, pass UINT32_MAX
     * as aValue to setTimeout.  The implementation may truncate timeout values
     * to a smaller range of values (e.g., 0 to 0xFFFF).
     */
    unsigned long getTimeout(in unsigned long aType);
    void          setTimeout(in unsigned long aType, in unsigned long aValue);

    /**
     * Sets the SO_LINGER option with the specified values for the l_onoff and
     * l_linger parameters. This applies PR_SockOpt_Linger before PR_Close and
     * can be used with a timeout of zero to send an RST packet when closing.
     */
    void setLinger(in boolean aPolarity, in short aTimeout);

    /**
     * True to set addr and port reuse socket options.
     */
    void setReuseAddrPort(in bool reuseAddrPort);

    /**
     * Values for the aType parameter passed to get/setTimeout.
     */
    const unsigned long TIMEOUT_CONNECT    = 0;
    const unsigned long TIMEOUT_READ_WRITE = 1;

    /**
     * nsITransportEventSink status codes.
     *
     * Although these look like XPCOM error codes and are passed in an nsresult
     * variable, they are *not* error codes.  Note that while they *do* overlap
     * with existing error codes in Necko, these status codes are confined
     * within a very limited context where no error codes may appear, so there
     * is no ambiguity.
     *
     * The values of these status codes must never change.
     *
     * The status codes appear in near-chronological order (not in numeric
     * order).  STATUS_RESOLVING may be skipped if the host does not need to be
     * resolved.  STATUS_WAITING_FOR is an optional status code, which the impl
     * of this interface may choose not to generate.
     *
     * In C++, these constants have a type of uint32_t, so C++ callers must use
     * the NS_NET_STATUS_* constants defined below, which have a type of
     * nsresult.
     */
    const unsigned long STATUS_RESOLVING      = 0x804b0003;
    const unsigned long STATUS_RESOLVED       = 0x804b000b;
    const unsigned long STATUS_CONNECTING_TO  = 0x804b0007;
    const unsigned long STATUS_CONNECTED_TO   = 0x804b0004;
    const unsigned long STATUS_SENDING_TO     = 0x804b0005;
    const unsigned long STATUS_WAITING_FOR    = 0x804b000a;
    const unsigned long STATUS_RECEIVING_FROM = 0x804b0006;
    const unsigned long STATUS_TLS_HANDSHAKE_STARTING = 0x804b000c;
    const unsigned long STATUS_TLS_HANDSHAKE_ENDED    = 0x804b000d;

    /**
     * connectionFlags is a bitmask that can be used to modify underlying
     * behavior of the socket connection. See the flags below.
     */
    attribute unsigned long connectionFlags;

    /**
     * Values for the connectionFlags
     *
     * When making a new connection BYPASS_CACHE will force the Necko DNS
     * cache entry to be refreshed with a new call to NSPR if it is set before
     * opening the new stream.
     */
    const unsigned long BYPASS_CACHE = (1 << 0);

    /**
     * When setting this flag, the socket will not apply any
     * credentials when establishing a connection. For example,
     * an SSL connection would not send any client-certificates
     * if this flag is set.
     */
    const unsigned long ANONYMOUS_CONNECT = (1 << 1);

    /**
     * If set, we will skip all IPv6 addresses the host may have and only
     * connect to IPv4 ones.
     */
    const unsigned long DISABLE_IPV6 = (1 << 2);

    /**
     * If set, indicates that the connection was initiated from a source
     * defined as being private in the sense of Private Browsing. Generally,
     * there should be no state shared between connections that are private
     * and those that are not; it is OK for multiple private connections
     * to share state with each other, and it is OK for multiple non-private
     * connections to share state with each other.
     */
    const unsigned long NO_PERMANENT_STORAGE = (1 << 3);

    /**
     * If set, we will skip all IPv4 addresses the host may have and only
     * connect to IPv6 ones.
     */
    const unsigned long DISABLE_IPV4 = (1 << 4);

    /**
     * If set, indicates that the socket should not connect if the hostname
     * resolves to an RFC1918 address or IPv6 equivalent.
     */
    const unsigned long DISABLE_RFC1918 = (1 << 5);

    /**
     * If set, do not use newer protocol features that might have interop problems
     * on the Internet. Intended only for use with critical infra like the updater.
     * default is false.
     */
    const unsigned long BE_CONSERVATIVE = (1 << 6);

    /**
     * If set, do not use TRR for resolving the host name. Intended only for
     * retries or other scenarios when TRR is deemed likely to have returned a
     * wrong adddress.
     */
    const unsigned long DISABLE_TRR = (1 << 7);

    /**
     * Values for the connectionFlags
     *
     * When using BYPASS_CACHE, setting this bit will invalidate the existing
     * cached entry immediately while the new resolve is being done to avoid
     * other users from using stale content in the mean time.
     */
    const unsigned long REFRESH_CACHE = (1 << 8);

    /**
     * If this flag is set then it means that if connecting the preferred ip
     * family has failed, retry with the oppsite one once more.
     */
    const unsigned long RETRY_WITH_DIFFERENT_IP_FAMILY = (1 << 9);

    /**
     * If we know that a server speaks only tls <1.3 there is no need to try
     * to use ech.
     */
    const unsigned long DONT_TRY_ECH = (1 << 10);

    /**
     * These two bits encode the TRR mode of the request.
     * Use the static helper methods convert between the TRR mode and flags.
     */
    const unsigned long TRR_MODE_FLAGS = (1 << 11) | (1 << 12);

%{C++

    static uint32_t GetFlagsFromTRRMode(nsIRequest::TRRMode aMode) {
        return static_cast<uint32_t>(aMode) << 11;
    }

    static nsIRequest::TRRMode GetTRRModeFromFlags(uint32_t aFlags) {
        return static_cast<nsIRequest::TRRMode>((aFlags & TRR_MODE_FLAGS) >> 11);
    }
%}

    /**
     * If set, we will use IP hint addresses to connect to the host.
     */
    const unsigned long USE_IP_HINT_ADDRESS = (1 << 13);

    /**
     * An opaque flags for non-standard behavior of the TLS system.
     * It is unlikely this will need to be set outside of telemetry studies
     * relating to the TLS implementation.
     */
    attribute unsigned long tlsFlags;

    /**
     * Socket QoS/ToS markings. Valid values are IPTOS_DSCP_AFxx or
     * IPTOS_CLASS_CSx (or IPTOS_DSCP_EF, but currently no supported
     * services require expedited-forwarding).
     * Not setting this value will leave the socket with the default
     * ToS value, which on most systems if IPTOS_CLASS_CS0 (formerly
     * IPTOS_PREC_ROUTINE).
     */
    attribute octet QoSBits;

    /**
     * TCP send and receive buffer sizes. A value of 0 means OS level
     * auto-tuning is in effect.
     */
    attribute unsigned long recvBufferSize;
    attribute unsigned long sendBufferSize;

    /**
     * TCP keepalive configuration (support varies by platform).
     * Note that the attribute as well as the setter can only accessed
     * in the socket thread.
     */
    attribute boolean keepaliveEnabled;
    void setKeepaliveVals(in long keepaliveIdleTime,
                          in long keepaliveRetryInterval);

    [noscript] void setFastOpenCallback(in TCPFastOpenPtr aFastOpen);

    readonly attribute nsresult firstRetryError;

    /**
     * If true, this socket transport has found out the prefered family
     * according it's connection flags could not be used to establish
     * connections any more.  Hence, the preference should be reset.
     */
    readonly attribute boolean resetIPFamilyPreference;

    /**
     * This attribute holds information whether echConfig has been used.
     * The value is set after PR_Connect is called.
     */
   readonly attribute boolean echConfigUsed;

    /**
     * Called to set the echConfig to the securityInfo object.
     */
    void setEchConfig(in ACString echConfig);

    /**
     * IP address resolved using TRR.
     */
    bool resolvedByTRR();

    /**
     * Indicate whether this socket is created from a private window. If yes,
     * this socket will be closed when the last private window is closed.
     */
    [noscript] void setIsPrivate(in boolean isPrivate);
};