gecko-dev/security/nss/cmd/dbtest/dbtest.c

267 строки
8.1 KiB
C

/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is the Netscape security libraries.
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1994-2000
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
* Sonja Mirtitsch Sun Microsystems
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
/*
** dbtest.c
**
** QA test for cert and key databases, especially to open
** database readonly (NSS_INIT_READONLY) and force initializations
** even if the databases cannot be opened (NSS_INIT_FORCEOPEN)
**
*/
#include <stdio.h>
#include <string.h>
#if defined(WIN32)
#include "fcntl.h"
#include "io.h"
#endif
#include "secutil.h"
#include "pk11pub.h"
#if defined(XP_UNIX)
#include <unistd.h>
#endif
#include "nspr.h"
#include "prtypes.h"
#include "certdb.h"
#include "nss.h"
#include "../modutil/modutil.h"
#include "plgetopt.h"
static char *progName;
char *dbDir = NULL;
static char *dbName[]={"secmod.db", "cert8.db", "key3.db"};
static char* dbprefix = "";
static char* secmodName = "secmod.db";
static char* userPassword = "";
PRBool verbose;
static char *
getPassword(PK11SlotInfo *slot, PRBool retry, void *arg)
{
int *success = (int *)arg;
if (retry) {
*success = 0;
return NULL;
}
*success = 1;
return PORT_Strdup(userPassword);
}
static void Usage(const char *progName)
{
printf("Usage: %s [-r] [-f] [-i] [-d dbdir ] \n",
progName);
printf("%-20s open database readonly (NSS_INIT_READONLY)\n", "-r");
printf("%-20s Continue to force initializations even if the\n", "-f");
printf("%-20s databases cannot be opened (NSS_INIT_FORCEOPEN)\n", " ");
printf("%-20s Try to initialize the database\n", "-i");
printf("%-20s Supply a password with which to initialize the db\n", "-p");
printf("%-20s Directory with cert database (default is .\n",
"-d certdir");
exit(1);
}
int main(int argc, char **argv)
{
PLOptState *optstate;
PLOptStatus optstatus;
PRUint32 flags = 0;
Error ret;
SECStatus rv;
char * dbString = NULL;
PRBool doInitTest = PR_FALSE;
int i;
progName = strrchr(argv[0], '/');
if (!progName)
progName = strrchr(argv[0], '\\');
progName = progName ? progName+1 : argv[0];
optstate = PL_CreateOptState(argc, argv, "rfip:d:h");
while ((optstatus = PL_GetNextOpt(optstate)) == PL_OPT_OK) {
switch (optstate->option) {
case 'h':
default : Usage(progName); break;
case 'r': flags |= NSS_INIT_READONLY; break;
case 'f': flags |= NSS_INIT_FORCEOPEN; break;
case 'i': doInitTest = PR_TRUE; break;
case 'p':
userPassword = PORT_Strdup(optstate->value);
break;
case 'd':
dbDir = PORT_Strdup(optstate->value);
break;
}
}
if (optstatus == PL_OPT_BAD)
Usage(progName);
if (!dbDir) {
dbDir = SECU_DefaultSSLDir(); /* Look in $SSL_DIR */
}
dbDir = SECU_ConfigDirectory(dbDir);
PR_fprintf(PR_STDERR, "dbdir selected is %s\n\n", dbDir);
if( dbDir[0] == '\0') {
PR_fprintf(PR_STDERR, errStrings[DIR_DOESNT_EXIST_ERR], dbDir);
ret= DIR_DOESNT_EXIST_ERR;
goto loser;
}
PR_Init( PR_USER_THREAD, PR_PRIORITY_NORMAL, 0);
/* get the status of the directory and databases and output message */
if(PR_Access(dbDir, PR_ACCESS_EXISTS) != PR_SUCCESS) {
PR_fprintf(PR_STDERR, errStrings[DIR_DOESNT_EXIST_ERR], dbDir);
} else if(PR_Access(dbDir, PR_ACCESS_READ_OK) != PR_SUCCESS) {
PR_fprintf(PR_STDERR, errStrings[DIR_NOT_READABLE_ERR], dbDir);
} else {
if( !( flags & NSS_INIT_READONLY ) &&
PR_Access(dbDir, PR_ACCESS_WRITE_OK) != PR_SUCCESS) {
PR_fprintf(PR_STDERR, errStrings[DIR_NOT_WRITEABLE_ERR], dbDir);
}
if (!doInitTest) {
for (i=0;i<3;i++) {
dbString=PR_smprintf("%s/%s",dbDir,dbName[i]);
PR_fprintf(PR_STDOUT, "database checked is %s\n",dbString);
if(PR_Access(dbString, PR_ACCESS_EXISTS) != PR_SUCCESS) {
PR_fprintf(PR_STDERR, errStrings[FILE_DOESNT_EXIST_ERR],
dbString);
} else if(PR_Access(dbString, PR_ACCESS_READ_OK) != PR_SUCCESS) {
PR_fprintf(PR_STDERR, errStrings[FILE_NOT_READABLE_ERR],
dbString);
} else if( !( flags & NSS_INIT_READONLY ) &&
PR_Access(dbString, PR_ACCESS_WRITE_OK) != PR_SUCCESS) {
PR_fprintf(PR_STDERR, errStrings[FILE_NOT_WRITEABLE_ERR],
dbString);
}
}
}
}
rv = NSS_Initialize(SECU_ConfigDirectory(dbDir), dbprefix, dbprefix,
secmodName, flags);
if (rv != SECSuccess) {
SECU_PrintPRandOSError(progName);
ret=NSS_INITIALIZE_FAILED_ERR;
} else {
ret=SUCCESS;
if (doInitTest) {
PK11SlotInfo * slot = PK11_GetInternalKeySlot();
SECStatus rv;
int passwordSuccess = 0;
int type = CKM_DES3_CBC;
SECItem keyid = { 0, NULL, 0 };
unsigned char keyIdData[] = { 0xff, 0xfe };
PK11SymKey *key = NULL;
keyid.data = keyIdData;
keyid.len = sizeof(keyIdData);
PK11_SetPasswordFunc(getPassword);
rv = PK11_InitPin(slot, (char *)NULL, userPassword);
if (rv != SECSuccess) {
PR_fprintf(PR_STDERR, "Failed to Init DB: %s\n",
SECU_Strerror(PORT_GetError()));
ret = CHANGEPW_FAILED_ERR;
}
if (*userPassword && !PK11_IsLoggedIn(slot, &passwordSuccess)) {
PR_fprintf(PR_STDERR, "New DB did not log in after init\n");
ret = AUTHENTICATION_FAILED_ERR;
}
/* generate a symetric key */
key = PK11_TokenKeyGen(slot, type, NULL, 0, &keyid,
PR_TRUE, &passwordSuccess);
if (!key) {
PR_fprintf(PR_STDERR, "Could not generated symetric key: %s\n",
SECU_Strerror(PORT_GetError()));
exit (UNSPECIFIED_ERR);
}
PK11_FreeSymKey(key);
PK11_Logout(slot);
PK11_Authenticate(slot, PR_TRUE, &passwordSuccess);
if (*userPassword && !passwordSuccess) {
PR_fprintf(PR_STDERR, "New DB Did not initalize\n");
ret = AUTHENTICATION_FAILED_ERR;
}
key = PK11_FindFixedKey(slot, type, &keyid, &passwordSuccess);
if (!key) {
PR_fprintf(PR_STDERR, "Could not find generated key: %s\n",
SECU_Strerror(PORT_GetError()));
ret = UNSPECIFIED_ERR;
} else {
PK11_FreeSymKey(key);
}
PK11_FreeSlot(slot);
}
if (NSS_Shutdown() != SECSuccess) {
PR_fprintf(PR_STDERR, "Could not find generated key: %s\n",
SECU_Strerror(PORT_GetError()));
exit(1);
}
}
loser:
return ret;
}