mozilla
/
gecko-dev
зеркало из https://github.com/mozilla/gecko-dev.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
gecko-dev/layout/printing/nsPrintJob.cpp

3075 строки
107 KiB
C++
Исходник Ответственный История

/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* vim: set ts=8 sts=2 et sw=2 tw=80: */
/* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/. */
#include "nsPrintJob.h"
#include "nsDebug.h"
#include "nsDocShell.h"
#include "nsReadableUtils.h"
#include "nsCRT.h"
#include "nsQueryObject.h"
#include "mozilla/AsyncEventDispatcher.h"
#include "mozilla/ResultExtensions.h"
#include "mozilla/ComputedStyleInlines.h"
#include "mozilla/dom/BrowsingContext.h"
#include "mozilla/dom/PBrowser.h"
#include "mozilla/dom/Selection.h"
#include "mozilla/dom/ShadowRoot.h"
#include "mozilla/dom/CustomEvent.h"
#include "mozilla/dom/ContentChild.h"
#include "mozilla/dom/HTMLCanvasElement.h"
#include "mozilla/dom/ScriptSettings.h"
#include "mozilla/StaticPrefs_print.h"
#include "mozilla/Telemetry.h"
#include "nsIBrowserChild.h"
#include "nsIOService.h"
#include "nsIScriptGlobalObject.h"
#include "nsIStringBundle.h"
#include "nsPIDOMWindow.h"
#include "nsPrintData.h"
#include "nsPrintObject.h"
#include "nsIDocShell.h"
#include "nsIURI.h"
#include "nsITextToSubURI.h"
#include "nsError.h"
#include "nsView.h"
#include <algorithm>
// Print Options
#include "nsIPrintSettings.h"
#include "nsIPrintSettingsService.h"
#include "nsIPrintSession.h"
#include "nsGfxCIID.h"
#include "nsGkAtoms.h"
#include "nsXPCOM.h"
static const char sPrintSettingsServiceContractID[] =
"@mozilla.org/gfx/printsettings-service;1";
#include "nsThreadUtils.h"
// Printing
#include "nsIWebBrowserPrint.h"
// Print Preview
// Print Progress
#include "nsIObserver.h"
// Print error dialog
// Printing Prompts
#include "nsIPrintingPromptService.h"
static const char kPrintingPromptService[] =
"@mozilla.org/embedcomp/printingprompt-service;1";
// Printing Timer
#include "nsPagePrintTimer.h"
// FrameSet
#include "mozilla/dom/Document.h"
#include "mozilla/dom/DocumentInlines.h"
// Focus
// Misc
#include "gfxContext.h"
#include "mozilla/gfx/DrawEventRecorder.h"
#include "mozilla/layout/RemotePrintJobChild.h"
#include "nsISupportsUtils.h"
#include "nsIScriptContext.h"
#include "nsIDocumentObserver.h"
#include "nsContentCID.h"
#include "nsLayoutCID.h"
#include "nsContentUtils.h"
#include "nsLayoutUtils.h"
#include "mozilla/Preferences.h"
#include "mozilla/PresShell.h"
#include "Text.h"
#include "nsWidgetsCID.h"
#include "nsIDeviceContextSpec.h"
#include "nsDeviceContextSpecProxy.h"
#include "nsViewManager.h"
#include "nsPageSequenceFrame.h"
#include "nsIInterfaceRequestor.h"
#include "nsIInterfaceRequestorUtils.h"
#include "nsIWebBrowserChrome.h"
#include "nsFrameManager.h"
#include "mozilla/ReflowInput.h"
#include "nsIContentViewer.h"
#include "nsIDocumentViewerPrint.h"
#include "nsFocusManager.h"
#include "nsRange.h"
#include "mozilla/Components.h"
#include "mozilla/dom/Element.h"
#include "mozilla/dom/HTMLFrameElement.h"
#include "nsContentList.h"
#include "xpcpublic.h"
#include "nsVariant.h"
#include "mozilla/ServoStyleSet.h"
using namespace mozilla;
using namespace mozilla::dom;
//-----------------------------------------------------
// PR LOGGING
#include "mozilla/Logging.h"
#ifdef DEBUG
// PR_LOGGING is force to always be on (even in release builds)
// but we only want some of it on,
//#define EXTENDED_DEBUG_PRINTING
#endif
// this log level turns on the dumping of each document's layout info
#define DUMP_LAYOUT_LEVEL (static_cast<mozilla::LogLevel>(9))
#ifndef PR_PL
static mozilla::LazyLogModule gPrintingLog("printing");
# define PR_PL(_p1) MOZ_LOG(gPrintingLog, mozilla::LogLevel::Debug, _p1);
#endif
#ifdef EXTENDED_DEBUG_PRINTING
static uint32_t gDumpFileNameCnt = 0;
static uint32_t gDumpLOFileNameCnt = 0;
#endif
#define PRT_YESNO(_p) ((_p) ? "YES" : "NO")
static const char* gFrameTypesStr[] = {"eDoc", "eFrame", "eIFrame",
"eFrameSet"};
// This processes the selection on aOrigDoc and creates an inverted selection on
// aDoc, which it then deletes. If the start or end of the inverted selection
// ranges occur in text nodes then an ellipsis is added.
static nsresult DeleteNonSelectedNodes(Document& aDoc);
#ifdef EXTENDED_DEBUG_PRINTING
// Forward Declarations
static void DumpPrintObjectsListStart(const char* aStr,
const nsTArray<nsPrintObject*>& aDocList);
static void DumpPrintObjectsTree(nsPrintObject* aPO, int aLevel = 0,
FILE* aFD = nullptr);
static void DumpPrintObjectsTreeLayout(const UniquePtr<nsPrintObject>& aPO,
nsDeviceContext* aDC, int aLevel = 0,
FILE* aFD = nullptr);
# define DUMP_DOC_LIST(_title) \
DumpPrintObjectsListStart((_title), mPrt->mPrintDocList);
# define DUMP_DOC_TREE DumpPrintObjectsTree(mPrt->mPrintObject.get());
# define DUMP_DOC_TREELAYOUT \
DumpPrintObjectsTreeLayout(mPrt->mPrintObject, mPrt->mPrintDC);
#else
# define DUMP_DOC_LIST(_title)
# define DUMP_DOC_TREE
# define DUMP_DOC_TREELAYOUT
#endif
// -------------------------------------------------------
// Helpers
// -------------------------------------------------------
static bool HasFramesetChild(nsIContent* aContent) {
if (!aContent) {
return false;
}
// do a breadth search across all siblings
for (nsIContent* child = aContent->GetFirstChild(); child;
child = child->GetNextSibling()) {
if (child->IsHTMLElement(nsGkAtoms::frameset)) {
return true;
}
}
return false;
}
static bool IsParentAFrameSet(nsIDocShell* aParent) {
// See if the incoming doc is the root document
if (!aParent) return false;
// When it is the top level document we need to check
// to see if it contains a frameset. If it does, then
// we only want to print the doc's children and not the document itself
// For anything else we always print all the children and the document
// for example, if the doc contains an IFRAME we eant to print the child
// document (the IFRAME) and then the rest of the document.
//
// XXX we really need to search the frame tree, and not the content
// but there is no way to distinguish between IFRAMEs and FRAMEs
// with the GetFrameType call.
// Bug 53459 has been files so we can eventually distinguish
// between IFRAME frames and FRAME frames
bool isFrameSet = false;
// only check to see if there is a frameset if there is
// NO parent doc for this doc. meaning this parent is the root doc
nsCOMPtr<Document> doc = aParent->GetDocument();
if (doc) {
nsIContent* rootElement = doc->GetRootElement();
if (rootElement) {
isFrameSet = HasFramesetChild(rootElement);
}
}
return isFrameSet;
}
/**
* Build a tree of nsPrintObjects under aPO. It also appends a (depth first)
* flat list of all the nsPrintObjects created to aPrintData->mPrintDocList. If
* one of the nsPrintObject's document is the focused document, then the print
* object is set as aPrintData->mSelectionRoot.
* @param aParentPO The parent nsPrintObject to populate, must not be null.
* @param aFocusedDoc Document from the window that had focus when print was
* initiated.
* @param aPrintData nsPrintData for the current print, must not be null.
*/
static void BuildNestedPrintObjects(const UniquePtr<nsPrintObject>& aParentPO,
const RefPtr<Document>& aFocusedDoc,
RefPtr<nsPrintData>& aPrintData) {
MOZ_ASSERT(aParentPO);
MOZ_ASSERT(aPrintData);
// If aParentPO is for an iframe and its original document is focusedDoc then
// always set as the selection root.
if (aParentPO->mFrameType == eIFrame &&
aParentPO->mDocument->GetOriginalDocument() == aFocusedDoc) {
aPrintData->mSelectionRoot = aParentPO.get();
} else if (!aPrintData->mSelectionRoot && aParentPO->HasSelection()) {
// If there is no focused iframe but there is a selection in one or more
// frames then we want to set the root nsPrintObject as the focus root so
// that later EnablePrintingSelectionOnly can search for and enable all
// nsPrintObjects containing selections.
aPrintData->mSelectionRoot = aPrintData->mPrintObject.get();
}
for (auto& bc : aParentPO->mDocShell->GetBrowsingContext()->Children()) {
nsCOMPtr<nsIDocShell> docShell = bc->GetDocShell();
if (!docShell) {
if (auto* cc = dom::ContentChild::GetSingleton()) {
nsCOMPtr<nsIPrintSettingsService> printSettingsService =
do_GetService(sPrintSettingsServiceContractID);
embedding::PrintData printData;
printSettingsService->SerializeToPrintData(aPrintData->mPrintSettings,
&printData);
Unused << cc->SendUpdateRemotePrintSettings(bc, printData);
}
continue;
}
RefPtr<Document> doc = docShell->GetDocument();
MOZ_DIAGNOSTIC_ASSERT(doc);
// We might find non-static documents here if the fission remoteness change
// hasn't happened / finished yet. In that case, just skip them, the same
// way we do for remote frames above.
MOZ_DIAGNOSTIC_ASSERT(doc->IsStaticDocument() || doc->IsInitialDocument());
if (!doc || !doc->IsStaticDocument()) {
continue;
}
auto childPO = MakeUnique<nsPrintObject>();
nsresult rv = childPO->InitAsNestedObject(docShell, doc, aParentPO.get());
if (NS_FAILED(rv)) {
MOZ_ASSERT_UNREACHABLE("Init failed?");
}
aPrintData->mPrintDocList.AppendElement(childPO.get());
BuildNestedPrintObjects(childPO, aFocusedDoc, aPrintData);
aParentPO->mKids.AppendElement(std::move(childPO));
}
}
/**
* On platforms that support it, sets the printer name stored in the
* nsIPrintSettings to the last-used printer if a printer name is not already
* set.
* XXXjwatt: Why is this necessary? Can't the code that reads the printer
* name later "just" use the last-used printer if a name isn't specified? Then
* we wouldn't have this inconsistency between platforms and processes.
*/
static nsresult EnsureSettingsHasPrinterNameSet(
nsIPrintSettings* aPrintSettings) {
#if defined(XP_MACOSX) || defined(ANDROID)
// Mac doesn't support retrieving a printer list.
return NS_OK;
#else
NS_ENSURE_ARG_POINTER(aPrintSettings);
// See if aPrintSettings already has a printer
nsString printerName;
nsresult rv = aPrintSettings->GetPrinterName(printerName);
if (NS_SUCCEEDED(rv) && !printerName.IsEmpty()) {
return NS_OK;
}
// aPrintSettings doesn't have a printer set.
// Try to fetch the name of the last-used printer.
nsCOMPtr<nsIPrintSettingsService> printSettingsService =
do_GetService(sPrintSettingsServiceContractID, &rv);
NS_ENSURE_SUCCESS(rv, rv);
rv = printSettingsService->GetLastUsedPrinterName(printerName);
if (NS_SUCCEEDED(rv) && !printerName.IsEmpty()) {
rv = aPrintSettings->SetPrinterName(printerName);
}
return rv;
#endif
}
static nsresult GetDefaultPrintSettings(nsIPrintSettings** aSettings) {
*aSettings = nullptr;
nsresult rv = NS_ERROR_FAILURE;
nsCOMPtr<nsIPrintSettingsService> printSettingsService =
do_GetService(sPrintSettingsServiceContractID, &rv);
NS_ENSURE_SUCCESS(rv, rv);
return printSettingsService->GetDefaultPrintSettingsForPrinting(aSettings);
}
//-------------------------------------------------------
NS_IMPL_ISUPPORTS(nsPrintJob, nsIWebProgressListener, nsISupportsWeakReference,
nsIObserver)
//-------------------------------------------------------
nsPrintJob::nsPrintJob() = default;
nsPrintJob::~nsPrintJob() {
Destroy(); // for insurance
DisconnectPagePrintTimer();
}
bool nsPrintJob::CheckBeforeDestroy() const {
return mPrt && mPrt->mPreparingForPrint;
}
PresShell* nsPrintJob::GetPrintPreviewPresShell() {
return mPrtPreview->mPrintObject->mPresShell;
}
//-------------------------------------------------------
void nsPrintJob::Destroy() {
if (mIsDestroying) {
return;
}
mIsDestroying = true;
mPrt = nullptr;
#ifdef NS_PRINT_PREVIEW
mPrtPreview = nullptr;
#endif
mDocViewerPrint = nullptr;
}
//-------------------------------------------------------
void nsPrintJob::DestroyPrintingData() { mPrt = nullptr; }
//---------------------------------------------------------------------------------
//-- Section: Methods needed by the DocViewer
//---------------------------------------------------------------------------------
//--------------------------------------------------------
nsresult nsPrintJob::Initialize(nsIDocumentViewerPrint* aDocViewerPrint,
nsIDocShell* aDocShell, Document* aOriginalDoc,
float aScreenDPI) {
NS_ENSURE_ARG_POINTER(aDocViewerPrint);
NS_ENSURE_ARG_POINTER(aDocShell);
NS_ENSURE_ARG_POINTER(aOriginalDoc);
mDocViewerPrint = aDocViewerPrint;
mDocShell = do_GetWeakReference(aDocShell);
mScreenDPI = aScreenDPI;
// Anything state that we need from aOriginalDoc must be fetched and stored
// here, since the document that the user selected to print may mutate
// across consecutive PrintPreview() calls.
Element* root = aOriginalDoc->GetRootElement();
mDisallowSelectionPrint =
root &&
root->HasAttr(kNameSpaceID_None, nsGkAtoms::mozdisallowselectionprint);
if (nsPIDOMWindowOuter* window = aOriginalDoc->GetWindow()) {
if (nsCOMPtr<nsIWebBrowserChrome> wbc = window->GetWebBrowserChrome()) {
// We only get this in order to skip opening the progress dialog when
// the window is modal. Once the platform code stops opening the
// progress dialog (bug 1558907), we can get rid of this.
wbc->IsWindowModal(&mIsForModalWindow);
}
}
return NS_OK;
}
//-------------------------------------------------------
nsresult nsPrintJob::Cancel() {
if (mPrt && mPrt->mPrintSettings) {
return mPrt->mPrintSettings->SetIsCancelled(true);
}
return NS_ERROR_FAILURE;
}
//-----------------------------------------------------------------
std::tuple<nsPageSequenceFrame*, int32_t>
nsPrintJob::GetSeqFrameAndCountSheets() const {
nsPrintData* printData = mPrtPreview ? mPrtPreview : mPrt;
if (NS_WARN_IF(!printData)) {
return {nullptr, 0};
}
const nsPrintObject* po = printData->mPrintObject.get();
if (NS_WARN_IF(!po)) {
return {nullptr, 0};
}
// This is sometimes incorrectly called before the pres shell has been created
// (bug 1141756). MOZ_DIAGNOSTIC_ASSERT so we'll still see the crash in
// Nightly/Aurora in case the other patch fixes this.
if (!po->mPresShell) {
MOZ_DIAGNOSTIC_ASSERT(
false, "GetSeqFrameAndCountSheets needs a non-null pres shell");
return {nullptr, 0};
}
nsPageSequenceFrame* seqFrame = po->mPresShell->GetPageSequenceFrame();
if (!seqFrame) {
return {nullptr, 0};
}
// count the total number of sheets
return {seqFrame, seqFrame->PrincipalChildList().GetLength()};
}
//---------------------------------------------------------------------------------
//-- Done: Methods needed by the DocViewer
//---------------------------------------------------------------------------------
//---------------------------------------------------------------------------------
//-- Section: nsIWebBrowserPrint
//---------------------------------------------------------------------------------
// Foward decl for Debug Helper Functions
#ifdef EXTENDED_DEBUG_PRINTING
# ifdef XP_WIN
static int RemoveFilesInDir(const char* aDir);
# endif
static void GetDocTitleAndURL(const UniquePtr<nsPrintObject>& aPO,
nsACString& aDocStr, nsACString& aURLStr);
static void DumpPrintObjectsTree(nsPrintObject* aPO, int aLevel, FILE* aFD);
static void DumpPrintObjectsList(const nsTArray<nsPrintObject*>& aDocList);
static void RootFrameList(nsPresContext* aPresContext, FILE* out,
const char* aPrefix);
static void DumpViews(nsIDocShell* aDocShell, FILE* out);
static void DumpLayoutData(const char* aTitleStr, const char* aURLStr,
nsPresContext* aPresContext, nsDeviceContext* aDC,
nsIFrame* aRootFrame, nsIDocShell* aDocShell,
FILE* aFD);
#endif
//--------------------------------------------------------------------------------
nsresult nsPrintJob::CommonPrint(bool aIsPrintPreview,
nsIPrintSettings* aPrintSettings,
nsIWebProgressListener* aWebProgressListener,
Document* aSourceDoc) {
// Callers must hold a strong reference to |this| to ensure that we stay
// alive for the duration of this method, because our main owning reference
// (on nsDocumentViewer) might be cleared during this function (if we cause
// script to run and it cancels the print operation).
nsresult rv = DoCommonPrint(aIsPrintPreview, aPrintSettings,
aWebProgressListener, aSourceDoc);
if (NS_FAILED(rv)) {
if (aIsPrintPreview) {
mIsCreatingPrintPreview = false;
SetIsPrintPreview(false);
} else {
SetIsPrinting(false);
}
if (mProgressDialogIsShown) CloseProgressDialog(aWebProgressListener);
if (rv != NS_ERROR_ABORT && rv != NS_ERROR_OUT_OF_MEMORY) {
FirePrintingErrorEvent(rv);
}
mPrt = nullptr;
}
return rv;
}
nsresult nsPrintJob::DoCommonPrint(bool aIsPrintPreview,
nsIPrintSettings* aPrintSettings,
nsIWebProgressListener* aWebProgressListener,
Document* aDoc) {
MOZ_ASSERT(aDoc->IsStaticDocument());
nsresult rv;
// Grab the new instance with local variable to guarantee that it won't be
// deleted during this method.
// Note: Methods we call early below rely on mPrt being set.
mPrt = new nsPrintData(aIsPrintPreview ? nsPrintData::eIsPrintPreview
: nsPrintData::eIsPrinting);
RefPtr<nsPrintData> printData = mPrt;
if (aIsPrintPreview) {
// The WebProgressListener can be QI'ed to nsIPrintingPromptService
// then that means the progress dialog is already being shown.
nsCOMPtr<nsIPrintingPromptService> pps(
do_QueryInterface(aWebProgressListener));
mProgressDialogIsShown = pps != nullptr;
mIsCreatingPrintPreview = true;
// Our new print preview nsPrintData is stored in mPtr until we move it
// to mPrtPreview once we've finish creating the print preview. We must
// clear mPtrPreview so that code will use mPtr until that happens.
mPrtPreview = nullptr;
SetIsPrintPreview(true);
} else {
mProgressDialogIsShown = false;
SetIsPrinting(true);
}
if (aWebProgressListener) {
printData->mPrintProgressListeners.AppendObject(aWebProgressListener);
}
// Get the document from the currently focused window.
RefPtr<Document> focusedDoc = FindFocusedDocument(aDoc);
// Get the docshell for this documentviewer
nsCOMPtr<nsIDocShell> docShell(do_QueryReferent(mDocShell, &rv));
NS_ENSURE_SUCCESS(rv, rv);
// if they don't pass in a PrintSettings, then get the Global PS
printData->mPrintSettings = aPrintSettings;
if (!printData->mPrintSettings) {
MOZ_TRY(GetDefaultPrintSettings(getter_AddRefs(printData->mPrintSettings)));
}
{
nsAutoScriptBlocker scriptBlocker;
printData->mPrintObject = MakeUnique<nsPrintObject>();
rv = printData->mPrintObject->InitAsRootObject(docShell, aDoc,
mIsCreatingPrintPreview);
NS_ENSURE_SUCCESS(rv, rv);
printData->mPrintDocList.AppendElement(printData->mPrintObject.get());
printData->mIsParentAFrameSet = IsParentAFrameSet(docShell);
printData->mPrintObject->mFrameType =
printData->mIsParentAFrameSet ? eFrameSet : eDoc;
BuildNestedPrintObjects(printData->mPrintObject, focusedDoc, printData);
}
// The nsAutoScriptBlocker above will now have been destroyed, which may
// cause our print/print-preview operation to finish. In this case, we
// should immediately return an error code so that the root caller knows
// it shouldn't continue to do anything with this instance.
if (mIsDestroying) {
return NS_ERROR_FAILURE;
}
// XXX This isn't really correct...
if (!printData->mPrintObject->mDocument ||
!printData->mPrintObject->mDocument->GetRootElement())
return NS_ERROR_GFX_PRINTER_STARTDOC;
MOZ_TRY(EnsureSettingsHasPrinterNameSet(printData->mPrintSettings));
printData->mPrintSettings->SetIsCancelled(false);
printData->mPrintSettings->GetShrinkToFit(&printData->mShrinkToFit);
// Create a print session and let the print settings know about it.
// Don't overwrite an existing print session.
// The print settings hold an nsWeakPtr to the session so it does not
// need to be cleared from the settings at the end of the job.
// XXX What lifetime does the printSession need to have?
nsCOMPtr<nsIPrintSession> printSession;
bool remotePrintJobListening = false;
if (!mIsCreatingPrintPreview) {
rv = printData->mPrintSettings->GetPrintSession(
getter_AddRefs(printSession));
if (NS_FAILED(rv) || !printSession) {
printSession = do_CreateInstance("@mozilla.org/gfx/printsession;1", &rv);
NS_ENSURE_SUCCESS(rv, rv);
printData->mPrintSettings->SetPrintSession(printSession);
} else {
RefPtr<layout::RemotePrintJobChild> remotePrintJob =
printSession->GetRemotePrintJob();
if (remotePrintJob) {
// If we have a RemotePrintJob add it to the print progress listeners,
// so it can forward to the parent.
printData->mPrintProgressListeners.AppendElement(remotePrintJob);
remotePrintJobListening = true;
}
}
}
// Now determine how to set up the Frame print UI
printData->mPrintSettings->SetIsPrintSelectionRBEnabled(
!mDisallowSelectionPrint && printData->mSelectionRoot);
bool printingViaParent =
XRE_IsContentProcess() && StaticPrefs::print_print_via_parent();
nsCOMPtr<nsIDeviceContextSpec> devspec;
if (printingViaParent) {
devspec = new nsDeviceContextSpecProxy();
} else {
devspec = do_CreateInstance("@mozilla.org/gfx/devicecontextspec;1", &rv);
NS_ENSURE_SUCCESS(rv, rv);
}
bool printSilently = false;
printData->mPrintSettings->GetPrintSilent(&printSilently);
if (StaticPrefs::print_always_print_silent()) {
printSilently = true;
}
if (mIsDoingPrinting && printSilently) {
Telemetry::ScalarAdd(Telemetry::ScalarID::PRINTING_SILENT_PRINT, 1);
}
// If printing via parent we still call ShowPrintDialog even for print preview
// because we use that to retrieve the print settings from the printer.
// The dialog is not shown, but this means we don't need to access the printer
// driver from the child, which causes sandboxing issues.
if (!mIsCreatingPrintPreview || printingViaParent) {
// The new print UI does not need to enter ShowPrintDialog below to spin
// the event loop and fetch real printer settings from the parent process,
// since it always passes complete print settings. (In fact, trying to
// fetch them from the parent can cause crashes.) Here we check for that
// case so that we can avoid calling ShowPrintDialog below. To err on the
// safe side, we exclude the old UI.
//
// TODO: We should MOZ_DIAGNOSTIC_ASSERT that GetIsInitializedFromPrinter
// returns true.
bool settingsAreComplete = false;
if (StaticPrefs::print_tab_modal_enabled()) {
printData->mPrintSettings->GetIsInitializedFromPrinter(
&settingsAreComplete);
}
// Ask dialog to be Print Shown via the Plugable Printing Dialog Service
// This service is for the Print Dialog and the Print Progress Dialog
// If printing silently or you can't get the service continue on
// If printing via the parent then we need to confirm that the pref is set
// and get a remote print job, but the parent won't display a prompt.
if (!settingsAreComplete && (!printSilently || printingViaParent)) {
nsCOMPtr<nsIPrintingPromptService> printPromptService(
do_GetService(kPrintingPromptService));
if (printPromptService) {
nsPIDOMWindowOuter* domWin = nullptr;
// We leave domWin as nullptr to indicate a call for print preview.
if (!mIsCreatingPrintPreview) {
domWin = aDoc->GetOriginalDocument()->GetWindow();
NS_ENSURE_TRUE(domWin, NS_ERROR_FAILURE);
if (!printSilently) {
if (mCreatedForPrintPreview) {
Telemetry::ScalarAdd(
Telemetry::ScalarID::PRINTING_DIALOG_OPENED_VIA_PREVIEW, 1);
} else {
Telemetry::ScalarAdd(
Telemetry::ScalarID::PRINTING_DIALOG_OPENED_WITHOUT_PREVIEW,
1);
}
}
}
// Platforms not implementing a given dialog for the service may
// return NS_ERROR_NOT_IMPLEMENTED or an error code.
//
// NS_ERROR_NOT_IMPLEMENTED indicates they want default behavior
// Any other error code means we must bail out
//
rv = printPromptService->ShowPrintDialog(domWin,
printData->mPrintSettings);
if (!mIsCreatingPrintPreview) {
if (rv == NS_ERROR_ABORT) {
// When printing silently we can't get here since the user doesn't
// have the opportunity to cancel printing.
if (mCreatedForPrintPreview) {
Telemetry::ScalarAdd(
Telemetry::ScalarID::PRINTING_DIALOG_VIA_PREVIEW_CANCELLED,
1);
} else {
Telemetry::ScalarAdd(
Telemetry::ScalarID::
PRINTING_DIALOG_WITHOUT_PREVIEW_CANCELLED,
1);
}
}
}
//
// ShowPrintDialog triggers an event loop which means we can't assume
// that the state of this->{anything} matches the state we've checked
// above. Including that a given {thing} is non null.
if (NS_WARN_IF(mPrt != printData)) {
return NS_ERROR_FAILURE;
}
if (NS_SUCCEEDED(rv)) {
// since we got the dialog and it worked then make sure we
// are telling GFX we want to print silent
printSilently = true;
if (printData->mPrintSettings && !mIsCreatingPrintPreview) {
// The user might have changed shrink-to-fit in the print dialog, so
// update our copy of its state
printData->mPrintSettings->GetShrinkToFit(&printData->mShrinkToFit);
// If we haven't already added the RemotePrintJob as a listener,
// add it now if there is one.
if (!remotePrintJobListening) {
RefPtr<layout::RemotePrintJobChild> remotePrintJob =
printSession->GetRemotePrintJob();
if (remotePrintJob) {
printData->mPrintProgressListeners.AppendElement(
remotePrintJob);
remotePrintJobListening = true;
}
}
}
} else if (rv == NS_ERROR_NOT_IMPLEMENTED) {
// This means the Dialog service was there,
// but they choose not to implement this dialog and
// are looking for default behavior from the toolkit
rv = NS_OK;
}
} else {
// No dialog service available
rv = NS_ERROR_NOT_IMPLEMENTED;
}
} else if (printSilently && !printingViaParent) {
// The condition above is only so contorted in order to enter this block
// under the exact same circumstances as we used to, in order to
// minimize risk for this change which may be getting late Beta uplift.
// Frankly calling SetupSilentPrinting should not be necessary any more
// since nsDeviceContextSpecGTK::EndDocument does what we need using a
// Runnable instead of spinning an event loop in a risk place like here.
// Additionally we should never need to do this when setting up print
// preview, we would only need it for printing.
// Call any code that requires a run of the event loop.
rv = printData->mPrintSettings->SetupSilentPrinting();
}
// Check explicitly for abort because it's expected
if (rv == NS_ERROR_ABORT) return rv;
NS_ENSURE_SUCCESS(rv, rv);
}
MOZ_TRY(devspec->Init(nullptr, printData->mPrintSettings,
mIsCreatingPrintPreview));
printData->mPrintDC = new nsDeviceContext();
MOZ_TRY(printData->mPrintDC->InitForPrinting(devspec));
if (XRE_IsParentProcess() && !printData->mPrintDC->IsSyncPagePrinting()) {
RefPtr<nsPrintJob> self(this);
printData->mPrintDC->RegisterPageDoneCallback(
[self](nsresult aResult) { self->PageDone(aResult); });
}
if (!StaticPrefs::print_tab_modal_enabled() && mIsCreatingPrintPreview) {
// In legacy print-preview mode, override any UI that wants to PrintPreview
// any selection or page range. The legacy print-preview intends to view
// every page in PrintPreview each time.
printData->mPrintSettings->SetPageRanges({});
}
MOZ_TRY(EnablePOsForPrinting());
if (mIsCreatingPrintPreview) {
bool notifyOnInit = false;
ShowPrintProgress(false, notifyOnInit, aDoc);
if (!notifyOnInit) {
rv = InitPrintDocConstruction(false);
} else {
rv = NS_OK;
}
} else {
bool doNotify;
ShowPrintProgress(true, doNotify, aDoc);
if (!doNotify) {
// Print listener setup...
printData->OnStartPrinting();
rv = InitPrintDocConstruction(false);
}
}
return NS_OK;
}
//---------------------------------------------------------------------------------
nsresult nsPrintJob::Print(Document* aSourceDoc,
nsIPrintSettings* aPrintSettings,
nsIWebProgressListener* aWebProgressListener) {
// If we have a print preview document, use that instead of the original
// mDocument. That way animated images etc. get printed using the same state
// as in print preview.
RefPtr<Document> doc = mPrtPreview && mPrtPreview->mPrintObject
? mPrtPreview->mPrintObject->mDocument.get()
: aSourceDoc;
nsresult rv = CommonPrint(false, aPrintSettings, aWebProgressListener, doc);
if (!aPrintSettings) {
// This is temporary until after bug 1602410 lands.
return rv;
}
// Save the print settings if the user picked them.
// We should probably do this immediately after the user confirms their
// selection (that is, move this to nsPrintingPromptService::ShowPrintDialog,
// just after the nsIPrintDialogService::Show call returns).
bool printSilently;
aPrintSettings->GetPrintSilent(&printSilently);
if (!printSilently) { // user picked settings
bool saveOnCancel;
aPrintSettings->GetSaveOnCancel(&saveOnCancel);
if ((rv != NS_ERROR_ABORT || saveOnCancel) &&
Preferences::GetBool("print.save_print_settings", false)) {
nsCOMPtr<nsIPrintSettingsService> printSettingsService =
do_GetService("@mozilla.org/gfx/printsettings-service;1");
printSettingsService->SavePrintSettingsToPrefs(
aPrintSettings, true,
nsIPrintSettings::kInitSaveAll &
~nsIPrintSettings::kInitSaveToFileName);
printSettingsService->SavePrintSettingsToPrefs(
aPrintSettings, false, nsIPrintSettings::kInitSavePrinterName);
}
}
return rv;
}
nsresult nsPrintJob::PrintPreview(Document* aSourceDoc,
nsIPrintSettings* aPrintSettings,
nsIWebProgressListener* aWebProgressListener,
PrintPreviewResolver&& aCallback) {
// Take ownership of aCallback, otherwise a function further up the call
// stack will call it to signal failure (by passing zero).
mPrintPreviewCallback = std::move(aCallback);
nsresult rv =
CommonPrint(true, aPrintSettings, aWebProgressListener, aSourceDoc);
if (NS_FAILED(rv)) {
if (mPrintPreviewCallback) {
mPrintPreviewCallback(
PrintPreviewResultInfo(0, 0, false, false, false)); // signal error
mPrintPreviewCallback = nullptr;
}
}
return rv;
}
int32_t nsPrintJob::GetRawNumPages() const {
auto [seqFrame, numSheets] = GetSeqFrameAndCountSheets();
Unused << numSheets;
return seqFrame ? seqFrame->GetRawNumPages() : 0;
}
bool nsPrintJob::GetIsEmpty() const {
auto [seqFrame, numSheets] = GetSeqFrameAndCountSheets();
if (!seqFrame) {
return true;
}
if (numSheets > 1) {
return false;
}
return !seqFrame->GetPagesInFirstSheet();
}
int32_t nsPrintJob::GetPrintPreviewNumSheets() const {
auto [seqFrame, numSheets] = GetSeqFrameAndCountSheets();
Unused << seqFrame;
return numSheets;
}
already_AddRefed<nsIPrintSettings> nsPrintJob::GetCurrentPrintSettings() {
if (mPrt) {
return do_AddRef(mPrt->mPrintSettings);
}
if (mPrtPreview) {
return do_AddRef(mPrtPreview->mPrintSettings);
}
return nullptr;
}
//-----------------------------------------------------------------
//-- Section: Pre-Reflow Methods
//-----------------------------------------------------------------
//----------------------------------------------------------------------
// Set up to use the "pluggable" Print Progress Dialog
void nsPrintJob::ShowPrintProgress(bool aIsForPrinting, bool& aDoNotify,
Document* aDoc) {
// default to not notifying, that if something here goes wrong
// or we aren't going to show the progress dialog we can straight into
// reflowing the doc for printing.
aDoNotify = false;
// Guarantee that mPrt and the objects it owns won't be deleted. If this
// method shows a progress dialog and spins the event loop. So, mPrt may be
// cleared or recreated.
RefPtr<nsPrintData> printData = mPrt;
bool showProgresssDialog =
!mProgressDialogIsShown && StaticPrefs::print_show_print_progress();
// Turning off the showing of Print Progress in Prefs overrides
// whether the calling PS desire to have it on or off, so only check PS if
// prefs says it's ok to be on.
if (showProgresssDialog) {
printData->mPrintSettings->GetShowPrintProgress(&showProgresssDialog);
}
// Now open the service to get the progress dialog
// If we don't get a service, that's ok, then just don't show progress
if (showProgresssDialog) {
nsCOMPtr<nsIPrintingPromptService> printPromptService(
do_GetService(kPrintingPromptService));
if (printPromptService) {
if (mIsForModalWindow) {
// Showing a print progress dialog when printing a modal window
// isn't supported. See bug 301560.
return;
}
nsPIDOMWindowOuter* domWin = aDoc->GetOriginalDocument()->GetWindow();
if (!domWin) return;
nsCOMPtr<nsIWebProgressListener> printProgressListener;
nsresult rv = printPromptService->ShowPrintProgressDialog(
domWin, printData->mPrintSettings, this, aIsForPrinting,
getter_AddRefs(printProgressListener),
getter_AddRefs(printData->mPrintProgressParams), &aDoNotify);
if (NS_SUCCEEDED(rv)) {
if (printProgressListener) {
printData->mPrintProgressListeners.AppendObject(
printProgressListener);
}
if (printData->mPrintProgressParams) {
SetURLAndTitleOnProgressParams(printData->mPrintObject,
printData->mPrintProgressParams);
}
}
}
}
}
// static
void nsPrintJob::GetDisplayTitleAndURL(Document& aDoc,
nsIPrintSettings* aSettings,
DocTitleDefault aTitleDefault,
nsAString& aTitle, nsAString& aURLStr) {
aTitle.Truncate();
aURLStr.Truncate();
if (aSettings) {
aSettings->GetTitle(aTitle);
aSettings->GetDocURL(aURLStr);
}
if (aTitle.IsEmpty()) {
aDoc.GetTitle(aTitle);
if (aTitle.IsEmpty()) {
if (!aURLStr.IsEmpty() &&
aTitleDefault == DocTitleDefault::eDocURLElseFallback) {
aTitle = aURLStr;
} else {
nsCOMPtr<nsIStringBundle> brandBundle;
nsCOMPtr<nsIStringBundleService> svc =
mozilla::components::StringBundle::Service();
if (svc) {
svc->CreateBundle("chrome://branding/locale/brand.properties",
getter_AddRefs(brandBundle));
if (brandBundle) {
brandBundle->GetStringFromName("brandShortName", aTitle);
}
}
if (aTitle.IsEmpty()) {
aTitle.AssignLiteral(u"Mozilla Document");
}
}
}
}
if (aURLStr.IsEmpty()) {
nsIURI* url = aDoc.GetDocumentURI();
if (!url) {
return;
}
nsCOMPtr<nsIURI> exposableURI = net::nsIOService::CreateExposableURI(url);
nsAutoCString urlCStr;
nsresult rv = exposableURI->GetSpec(urlCStr);
if (NS_FAILED(rv)) {
return;
}
nsCOMPtr<nsITextToSubURI> textToSubURI =
do_GetService(NS_ITEXTTOSUBURI_CONTRACTID, &rv);
if (NS_FAILED(rv)) {
return;
}
textToSubURI->UnEscapeURIForUI(urlCStr, aURLStr);
}
}
//---------------------------------------------------------------------
nsresult nsPrintJob::DocumentReadyForPrinting() {
// Send the document to the printer...
nsresult rv = SetupToPrintContent();
if (NS_FAILED(rv)) {
// The print job was canceled or there was a problem
// So remove all other documents from the print list
DonePrintingSheets(nullptr, rv);
}
return rv;
}
/** ---------------------------------------------------
* Cleans up when an error occurred
*/
nsresult nsPrintJob::CleanupOnFailure(nsresult aResult, bool aIsPrinting) {
PR_PL(("**** Failed %s - rv 0x%" PRIX32,
aIsPrinting ? "Printing" : "Print Preview",
static_cast<uint32_t>(aResult)));
/* cleanup... */
if (mPagePrintTimer) {
mPagePrintTimer->Stop();
DisconnectPagePrintTimer();
}
if (aIsPrinting) {
SetIsPrinting(false);
} else {
SetIsPrintPreview(false);
mIsCreatingPrintPreview = false;
}
/* cleanup done, let's fire-up an error dialog to notify the user
* what went wrong...
*
* When rv == NS_ERROR_ABORT, it means we want out of the
* print job without displaying any error messages
*/
if (aResult != NS_ERROR_ABORT) {
FirePrintingErrorEvent(aResult);
}
FirePrintCompletionEvent();
return aResult;
}
//---------------------------------------------------------------------
void nsPrintJob::FirePrintingErrorEvent(nsresult aPrintError) {
if (mPrintPreviewCallback) {
mPrintPreviewCallback(
PrintPreviewResultInfo(0, 0, false, false, false)); // signal error
mPrintPreviewCallback = nullptr;
}
nsCOMPtr<nsIContentViewer> cv = do_QueryInterface(mDocViewerPrint);
if (NS_WARN_IF(!cv)) {
return;
}
nsCOMPtr<Document> doc = cv->GetDocument();
RefPtr<CustomEvent> event = NS_NewDOMCustomEvent(doc, nullptr, nullptr);
MOZ_ASSERT(event);
AutoJSAPI jsapi;
if (!jsapi.Init(event->GetParentObject())) {
return;
}
JSContext* cx = jsapi.cx();
JS::Rooted<JS::Value> detail(
cx, JS::NumberValue(static_cast<double>(aPrintError)));
event->InitCustomEvent(cx, u"PrintingError"_ns, false, false, detail);
event->SetTrusted(true);
RefPtr<AsyncEventDispatcher> asyncDispatcher =
new AsyncEventDispatcher(doc, event);
asyncDispatcher->mOnlyChromeDispatch = ChromeOnlyDispatch::eYes;
asyncDispatcher->RunDOMEventWhenSafe();
// Inform any progress listeners of the Error.
if (mPrt) {
// Note that nsPrintData::DoOnStatusChange() will call some listeners.
// So, mPrt can be cleared or recreated.
RefPtr<nsPrintData> printData = mPrt;
printData->DoOnStatusChange(aPrintError);
}
}
//-----------------------------------------------------------------
//-- Section: Reflow Methods
//-----------------------------------------------------------------
nsresult nsPrintJob::ReconstructAndReflow(bool doSetPixelScale) {
if (NS_WARN_IF(!mPrt)) {
return NS_ERROR_FAILURE;
}
#if defined(XP_WIN) && defined(EXTENDED_DEBUG_PRINTING)
// We need to clear all the output files here
// because they will be re-created with second reflow of the docs
if (MOZ_LOG_TEST(gPrintingLog, DUMP_LAYOUT_LEVEL)) {
RemoveFilesInDir(".\\");
gDumpFileNameCnt = 0;
gDumpLOFileNameCnt = 0;
}
#endif
// In this loop, it's conceivable that one of our helpers might clear mPrt,
// while we're using it & its members! So we capture it in an owning local
// reference & use that instead of using mPrt directly.
RefPtr<nsPrintData> printData = mPrt;
for (uint32_t i = 0; i < printData->mPrintDocList.Length(); ++i) {
nsPrintObject* po = printData->mPrintDocList.ElementAt(i);
NS_ASSERTION(po, "nsPrintObject can't be null!");
if (!po->PrintingIsEnabled() || po->mInvisible) {
continue;
}
// When the print object has been marked as "print the document" (i.e,
// po->PrintingIsEnabled() is true), mPresContext and mPresShell should be
// non-nullptr (i.e., should've been created for the print) since they
// are necessary to print the document.
MOZ_ASSERT(po->mPresContext && po->mPresShell,
"mPresContext and mPresShell shouldn't be nullptr when the "
"print object "
"has been marked as \"print the document\"");
UpdateZoomRatio(po, doSetPixelScale);
po->mPresContext->SetPageScale(po->mZoomRatio);
// Calculate scale factor from printer to screen
float printDPI = float(AppUnitsPerCSSInch()) /
float(printData->mPrintDC->AppUnitsPerDevPixel());
po->mPresContext->SetPrintPreviewScale(mScreenDPI / printDPI);
RefPtr<PresShell> presShell(po->mPresShell);
if (NS_WARN_IF(presShell->IsDestroying())) {
return NS_ERROR_FAILURE;
}
presShell->ReconstructFrames();
// If the printing was canceled or restarted with different data,
// let's stop doing this printing.
if (NS_WARN_IF(mPrt != printData)) {
return NS_ERROR_FAILURE;
}
// For all views except the first one, setup the root view.
// ??? Can there be multiple po for the top-level-document?
bool documentIsTopLevel = true;
if (i != 0) {
nsSize adjSize;
bool doReturn;
nsresult rv = SetRootView(po, doReturn, documentIsTopLevel, adjSize);
MOZ_ASSERT(!documentIsTopLevel, "How could this happen?");
if (NS_FAILED(rv) || doReturn) {
return rv;
}
}
presShell->FlushPendingNotifications(FlushType::Layout);
if (NS_WARN_IF(presShell->IsDestroying())) {
return NS_ERROR_FAILURE;
}
// If the printing was canceled or restarted with different data,
// let's stop doing this printing.
if (NS_WARN_IF(mPrt != printData)) {
return NS_ERROR_FAILURE;
}
nsresult rv = UpdateSelectionAndShrinkPrintObject(po, documentIsTopLevel);
NS_ENSURE_SUCCESS(rv, rv);
}
return NS_OK;
}
//-------------------------------------------------------
nsresult nsPrintJob::SetupToPrintContent() {
// This method may be called while DoCommonPrint() initializes the instance
// when its script blocker goes out of scope. In such case, this cannot do
// its job as expected because some objects in mPrt have not been initialized
// yet but they are necessary.
// Note: it shouldn't be possible for mPrt->mPrintObject to be null; we check
// it for good measure (after we check its owner) before we start
// dereferencing it below.
if (NS_WARN_IF(!mPrt) || NS_WARN_IF(!mPrt->mPrintObject)) {
return NS_ERROR_FAILURE;
}
// If this is creating print preview, mPrt->mPrintObject->mPresContext and
// mPrt->mPrintObject->mPresShell need to be non-nullptr because this cannot
// initialize page sequence frame without them at end of this method since
// page sequence frame has already been destroyed or not been created yet.
if (mIsCreatingPrintPreview &&
(NS_WARN_IF(!mPrt->mPrintObject->mPresContext) ||
NS_WARN_IF(!mPrt->mPrintObject->mPresShell))) {
return NS_ERROR_FAILURE;
}
// If this is printing some documents (not print-previewing the documents),
// mPrt->mPrintObject->mPresContext and mPrt->mPrintObject->mPresShell can be
// nullptr only when mPrt->mPrintObject->PrintingIsEnabled() is false. E.g.,
// if the document has a <frameset> element and it's printing only content in
// a <frame> element or all <frame> elements separately.
MOZ_ASSERT(
(!mIsCreatingPrintPreview && !mPrt->mPrintObject->PrintingIsEnabled()) ||
(mPrt->mPrintObject->mPresContext && mPrt->mPrintObject->mPresShell),
"mPresContext and mPresShell shouldn't be nullptr when printing the "
"document or creating print-preview");
bool didReconstruction = false;
// This method works with mPrt->mPrintObject. So, we need to guarantee that
// it won't be deleted in this method. We achieve this by holding a strong
// local reference to mPrt, which in turn keeps mPrintObject alive.
RefPtr<nsPrintData> printData = mPrt;
// If some new content got loaded since the initial reflow rebuild
// everything.
if (mDidLoadDataForPrinting) {
nsresult rv = ReconstructAndReflow(DoSetPixelScale());
if (NS_WARN_IF(NS_FAILED(rv))) {
return rv;
}
// If the printing was canceled or restarted with different data,
// let's stop doing this printing.
if (NS_WARN_IF(mPrt != printData)) {
return NS_ERROR_FAILURE;
}
didReconstruction = true;
}
// Here is where we figure out if extra reflow for shrinking the content
// is required.
// But skip this step if we are in PrintPreview
bool ppIsShrinkToFit = mPrtPreview && mPrtPreview->mShrinkToFit;
if (printData->mShrinkToFit && !ppIsShrinkToFit) {
// Now look for the PO that has the smallest percent for shrink to fit
if (printData->mPrintDocList.Length() > 1 &&
printData->mPrintObject->mFrameType == eFrameSet) {
nsPrintObject* smallestPO = FindSmallestSTF();
NS_ASSERTION(smallestPO, "There must always be an XMost PO!");
if (smallestPO) {
// Calc the shrinkage based on the entire content area
printData->mShrinkRatio = smallestPO->mShrinkRatio;
}
} else {
// Single document so use the Shrink as calculated for the PO
printData->mShrinkRatio = printData->mPrintObject->mShrinkRatio;
}
if (printData->mShrinkRatio < 0.998f) {
nsresult rv = ReconstructAndReflow(true);
if (NS_WARN_IF(NS_FAILED(rv))) {
return rv;
}
// If the printing was canceled or restarted with different data,
// let's stop doing this printing.
if (NS_WARN_IF(mPrt != printData)) {
return NS_ERROR_FAILURE;
}
didReconstruction = true;
}
if (MOZ_LOG_TEST(gPrintingLog, LogLevel::Debug)) {
float calcRatio = 0.0f;
if (printData->mPrintDocList.Length() > 1 &&
printData->mPrintObject->mFrameType == eFrameSet) {
nsPrintObject* smallestPO = FindSmallestSTF();
NS_ASSERTION(smallestPO, "There must always be an XMost PO!");
if (smallestPO) {
// Calc the shrinkage based on the entire content area
calcRatio = smallestPO->mShrinkRatio;
}
} else {
// Single document so use the Shrink as calculated for the PO
calcRatio = printData->mPrintObject->mShrinkRatio;
}
PR_PL(
("*******************************************************************"
"*******\n"));
PR_PL(("STF Ratio is: %8.5f Effective Ratio: %8.5f Diff: %8.5f\n",
printData->mShrinkRatio, calcRatio,
printData->mShrinkRatio - calcRatio));
PR_PL(
("*******************************************************************"
"*******\n"));
}
}
// If the frames got reconstructed and reflowed the number of pages might
// has changed.
if (didReconstruction) {
FirePrintPreviewUpdateEvent();
// If the printing was canceled or restarted with different data,
// let's stop doing this printing.
if (NS_WARN_IF(mPrt != printData)) {
return NS_ERROR_FAILURE;
}
}
DUMP_DOC_LIST(("\nAfter Reflow------------------------------------------"));
PR_PL(("\n"));
PR_PL(("-------------------------------------------------------\n"));
PR_PL(("\n"));
CalcNumPrintablePages(printData->mNumPrintablePages);
PR_PL(("--- Printing %d pages\n", printData->mNumPrintablePages));
DUMP_DOC_TREELAYOUT;
// Print listener setup...
printData->OnStartPrinting();
// If the printing was canceled or restarted with different data,
// let's stop doing this printing.
if (NS_WARN_IF(mPrt != printData)) {
return NS_ERROR_FAILURE;
}
nsAutoString fileNameStr;
// check to see if we are printing to a file
bool isPrintToFile = false;
printData->mPrintSettings->GetPrintToFile(&isPrintToFile);
if (isPrintToFile) {
// On some platforms The BeginDocument needs to know the name of the file.
printData->mPrintSettings->GetToFileName(fileNameStr);
}
nsAutoString docTitleStr;
nsAutoString docURLStr;
GetDisplayTitleAndURL(
*printData->mPrintObject->mDocument, printData->mPrintSettings,
DocTitleDefault::eDocURLElseFallback, docTitleStr, docURLStr);
int32_t startPage = 1;
int32_t endPage = printData->mNumPrintablePages;
nsTArray<int32_t> ranges;
printData->mPrintSettings->GetPageRanges(ranges);
for (size_t i = 0; i < ranges.Length(); i += 2) {
startPage = std::max(1, std::min(startPage, ranges[i]));
endPage = std::min(printData->mNumPrintablePages,
std::max(endPage, ranges[i + 1]));
}
nsresult rv = NS_OK;
// BeginDocument may pass back a FAILURE code
// i.e. On Windows, if you are printing to a file and hit "Cancel"
// to the "File Name" dialog, this comes back as an error
// Don't start printing when regression test are executed
if (mIsDoingPrinting) {
rv = printData->mPrintDC->BeginDocument(docTitleStr, fileNameStr, startPage,
endPage);
}
if (mIsCreatingPrintPreview) {
// Copy docTitleStr and docURLStr to the pageSequenceFrame, to be displayed
// in the header
nsPageSequenceFrame* seqFrame =
printData->mPrintObject->mPresShell->GetPageSequenceFrame();
if (seqFrame) {
seqFrame->StartPrint(printData->mPrintObject->mPresContext,
printData->mPrintSettings, docTitleStr, docURLStr);
}
}
PR_PL(("****************** Begin Document ************************\n"));
if (NS_FAILED(rv)) {
NS_WARNING_ASSERTION(rv == NS_ERROR_ABORT,
"Failed to begin document for printing");
return rv;
}
// This will print the docshell document
// when it completes asynchronously in the DonePrintingSheets method
// it will check to see if there are more docshells to be printed and
// then PrintDocContent will be called again.
if (mIsDoingPrinting) {
PrintDocContent(printData->mPrintObject, rv); // ignore return value
}
return rv;
}
//-------------------------------------------------------
// Recursively reflow each sub-doc and then calc
// all the frame locations of the sub-docs
nsresult nsPrintJob::ReflowDocList(const UniquePtr<nsPrintObject>& aPO,
bool aSetPixelScale) {
NS_ENSURE_ARG_POINTER(aPO);
// Check to see if the subdocument's element has been hidden by the parent
// document
if (aPO->mParent && aPO->mParent->mPresShell) {
nsIFrame* frame =
aPO->mContent ? aPO->mContent->GetPrimaryFrame() : nullptr;
if (!frame || !frame->StyleVisibility()->IsVisible()) {
aPO->EnablePrinting(false);
aPO->mInvisible = true;
return NS_OK;
}
}
UpdateZoomRatio(aPO.get(), aSetPixelScale);
// Reflow the PO
MOZ_TRY(ReflowPrintObject(aPO));
for (const UniquePtr<nsPrintObject>& kid : aPO->mKids) {
MOZ_TRY(ReflowDocList(kid, aSetPixelScale));
}
return NS_OK;
}
void nsPrintJob::FirePrintPreviewUpdateEvent() {
// Dispatch the event only while in PrintPreview. When printing, there is no
// listener bound to this event and therefore no need to dispatch it.
if (mCreatedForPrintPreview && !mIsDoingPrinting) {
nsCOMPtr<nsIContentViewer> cv = do_QueryInterface(mDocViewerPrint);
(new AsyncEventDispatcher(cv->GetDocument(), u"printPreviewUpdate"_ns,
CanBubble::eYes, ChromeOnlyDispatch::eYes))
->RunDOMEventWhenSafe();
}
}
nsresult nsPrintJob::InitPrintDocConstruction(bool aHandleError) {
// Guarantee that mPrt->mPrintObject won't be deleted. It's owned by mPrt.
// So, we should grab it with local variable.
RefPtr<nsPrintData> printData = mPrt;
if (NS_WARN_IF(!printData)) {
return NS_ERROR_FAILURE;
}
// Attach progressListener to catch network requests.
mDidLoadDataForPrinting = false;
{
AutoRestore<bool> restore{mDoingInitialReflow};
mDoingInitialReflow = true;
nsCOMPtr<nsIWebProgress> webProgress =
do_QueryInterface(printData->mPrintObject->mDocShell);
webProgress->AddProgressListener(static_cast<nsIWebProgressListener*>(this),
nsIWebProgress::NOTIFY_STATE_REQUEST);
MOZ_TRY(ReflowDocList(printData->mPrintObject, DoSetPixelScale()));
FirePrintPreviewUpdateEvent();
}
MaybeResumePrintAfterResourcesLoaded(aHandleError);
return NS_OK;
}
bool nsPrintJob::ShouldResumePrint() const {
if (mDoingInitialReflow) {
return false;
}
Document* doc = mPrt->mPrintObject->mDocument;
MOZ_ASSERT(doc);
NS_ENSURE_TRUE(doc, true);
nsCOMPtr<nsILoadGroup> lg = doc->GetDocumentLoadGroup();
NS_ENSURE_TRUE(lg, true);
bool pending = false;
nsresult rv = lg->IsPending(&pending);
NS_ENSURE_SUCCESS(rv, true);
return !pending;
}
nsresult nsPrintJob::MaybeResumePrintAfterResourcesLoaded(
bool aCleanupOnError) {
if (!ShouldResumePrint()) {
mDidLoadDataForPrinting = true;
return NS_OK;
}
// If Destroy() has already been called, mPtr is nullptr. Then, the instance
// needs to do nothing anymore in this method.
// Note: it shouldn't be possible for mPrt->mPrintObject to be null; we
// just check it for good measure, as we check its owner.
// Note: it shouldn't be possible for mPrt->mPrintObject->mDocShell to be
// null; we just check it for good measure, as we check its owner.
if (!mPrt || NS_WARN_IF(!mPrt->mPrintObject) ||
NS_WARN_IF(!mPrt->mPrintObject->mDocShell)) {
return NS_ERROR_FAILURE;
}
nsCOMPtr<nsIWebProgress> webProgress =
do_QueryInterface(mPrt->mPrintObject->mDocShell);
webProgress->RemoveProgressListener(
static_cast<nsIWebProgressListener*>(this));
nsresult rv;
if (mIsDoingPrinting) {
rv = DocumentReadyForPrinting();
} else {
rv = FinishPrintPreview();
}
/* cleaup on failure + notify user */
if (aCleanupOnError && NS_FAILED(rv)) {
NS_WARNING_ASSERTION(rv == NS_ERROR_ABORT,
"nsPrintJob::ResumePrintAfterResourcesLoaded failed");
CleanupOnFailure(rv, !mIsDoingPrinting);
}
return rv;
}
////////////////////////////////////////////////////////////////////////////////
// nsIWebProgressListener
MOZ_CAN_RUN_SCRIPT_BOUNDARY NS_IMETHODIMP
nsPrintJob::OnStateChange(nsIWebProgress* aWebProgress, nsIRequest* aRequest,
uint32_t aStateFlags, nsresult aStatus) {
if (aStateFlags & STATE_STOP) {
// If all resources are loaded, then finish and reflow.
MaybeResumePrintAfterResourcesLoaded(/* aCleanupOnError */ true);
}
return NS_OK;
}
NS_IMETHODIMP
nsPrintJob::OnProgressChange(nsIWebProgress* aWebProgress, nsIRequest* aRequest,
int32_t aCurSelfProgress, int32_t aMaxSelfProgress,
int32_t aCurTotalProgress,
int32_t aMaxTotalProgress) {
MOZ_ASSERT_UNREACHABLE("notification excluded in AddProgressListener(...)");
return NS_OK;
}
NS_IMETHODIMP
nsPrintJob::OnLocationChange(nsIWebProgress* aWebProgress, nsIRequest* aRequest,
nsIURI* aLocation, uint32_t aFlags) {
MOZ_ASSERT_UNREACHABLE("notification excluded in AddProgressListener(...)");
return NS_OK;
}
NS_IMETHODIMP
nsPrintJob::OnStatusChange(nsIWebProgress* aWebProgress, nsIRequest* aRequest,
nsresult aStatus, const char16_t* aMessage) {
MOZ_ASSERT_UNREACHABLE("notification excluded in AddProgressListener(...)");
return NS_OK;
}
NS_IMETHODIMP
nsPrintJob::OnSecurityChange(nsIWebProgress* aWebProgress, nsIRequest* aRequest,
uint32_t aState) {
MOZ_ASSERT_UNREACHABLE("notification excluded in AddProgressListener(...)");
return NS_OK;
}
NS_IMETHODIMP
nsPrintJob::OnContentBlockingEvent(nsIWebProgress* aWebProgress,
nsIRequest* aRequest, uint32_t aEvent) {
MOZ_ASSERT_UNREACHABLE("notification excluded in AddProgressListener(...)");
return NS_OK;
}
//-------------------------------------------------------
void nsPrintJob::UpdateZoomRatio(nsPrintObject* aPO, bool aSetPixelScale) {
// Here is where we set the shrinkage value into the DC
// and this is what actually makes it shrink
if (aSetPixelScale && aPO->mFrameType != eIFrame) {
// Round down
aPO->mZoomRatio = mPrt->mPrintSettings->GetPrintSelectionOnly()
? aPO->mShrinkRatio - 0.005f
: mPrt->mShrinkRatio - 0.005f;
} else if (!mPrt->mShrinkToFit) {
double scaling;
mPrt->mPrintSettings->GetScaling(&scaling);
aPO->mZoomRatio = float(scaling);
}
}
nsresult nsPrintJob::UpdateSelectionAndShrinkPrintObject(
nsPrintObject* aPO, bool aDocumentIsTopLevel) {
PresShell* displayPresShell = aPO->mDocShell->GetPresShell();
// Transfer Selection Ranges to the new Print PresShell
RefPtr<Selection> selection, selectionPS;
// It's okay if there is no display shell, just skip copying the selection
if (displayPresShell) {
selection = displayPresShell->GetCurrentSelection(SelectionType::eNormal);
}
selectionPS = aPO->mPresShell->GetCurrentSelection(SelectionType::eNormal);
// Reset all existing selection ranges that might have been added by calling
// this function before.
if (selectionPS) {
selectionPS->RemoveAllRanges(IgnoreErrors());
}
if (selection && selectionPS) {
int32_t cnt = selection->RangeCount();
int32_t inx;
for (inx = 0; inx < cnt; ++inx) {
const RefPtr<nsRange> range{selection->GetRangeAt(inx)};
selectionPS->AddRangeAndSelectFramesAndNotifyListeners(*range,
IgnoreErrors());
}
}
// If we are trying to shrink the contents to fit on the page
// we must first locate the "pageContent" frame
// Then we walk the frame tree and look for the "xmost" frame
// this is the frame where the right-hand side of the frame extends
// the furthest
if (mPrt->mShrinkToFit && aDocumentIsTopLevel) {
nsPageSequenceFrame* pageSeqFrame = aPO->mPresShell->GetPageSequenceFrame();
NS_ENSURE_STATE(pageSeqFrame);
aPO->mShrinkRatio = pageSeqFrame->GetSTFPercent();
// Limit the shrink-to-fit scaling for some text-ish type of documents.
nsAutoString contentType;
aPO->mPresShell->GetDocument()->GetContentType(contentType);
if (contentType.EqualsLiteral("application/xhtml+xml") ||
StringBeginsWith(contentType, u"text/"_ns)) {
int32_t limitPercent =
Preferences::GetInt("print.shrink-to-fit.scale-limit-percent", 20);
limitPercent = std::max(0, limitPercent);
limitPercent = std::min(100, limitPercent);
float minShrinkRatio = float(limitPercent) / 100;
aPO->mShrinkRatio = std::max(aPO->mShrinkRatio, minShrinkRatio);
}
}
return NS_OK;
}
bool nsPrintJob::DoSetPixelScale() {
// This is an Optimization
// If we are in PP then we already know all the shrinkage information
// so just transfer it to the PrintData and we will skip the extra shrinkage
// reflow
//
// doSetPixelScale tells Reflow whether to set the shrinkage value into the DC
// The first time we do not want to do this, the second time through we do
bool doSetPixelScale = false;
bool ppIsShrinkToFit = mPrtPreview && mPrtPreview->mShrinkToFit;
if (ppIsShrinkToFit) {
mPrt->mShrinkRatio = mPrtPreview->mShrinkRatio;
doSetPixelScale = true;
}
return doSetPixelScale;
}
nsView* nsPrintJob::GetParentViewForRoot() {
if (mIsCreatingPrintPreview) {
if (nsCOMPtr<nsIContentViewer> cv = do_QueryInterface(mDocViewerPrint)) {
return cv->FindContainerView();
}
}
return nullptr;
}
nsresult nsPrintJob::SetRootView(nsPrintObject* aPO, bool& doReturn,
bool& documentIsTopLevel, nsSize& adjSize) {
bool canCreateScrollbars = true;
nsView* rootView;
nsView* parentView = nullptr;
doReturn = false;
if (aPO->mParent && aPO->mParent->PrintingIsEnabled()) {
nsIFrame* frame =
aPO->mContent ? aPO->mContent->GetPrimaryFrame() : nullptr;
// Without a frame, this document can't be displayed; therefore, there is no
// point to reflowing it
if (!frame) {
aPO->EnablePrinting(false);
doReturn = true;
return NS_OK;
}
// XXX If printing supported printing document hierarchies with non-constant
// zoom this would be wrong as we use the same mPrt->mPrintDC for all
// subdocuments.
adjSize = frame->GetContentRect().Size();
documentIsTopLevel = false;
// presshell exists because parent is printable
// the top nsPrintObject's widget will always have scrollbars
if (frame && frame->IsSubDocumentFrame()) {
nsView* view = frame->GetView();
NS_ENSURE_TRUE(view, NS_ERROR_FAILURE);
view = view->GetFirstChild();
NS_ENSURE_TRUE(view, NS_ERROR_FAILURE);
parentView = view;
canCreateScrollbars = false;
}
} else {
nscoord pageWidth, pageHeight;
mPrt->mPrintDC->GetDeviceSurfaceDimensions(pageWidth, pageHeight);
adjSize = nsSize(pageWidth, pageHeight);
documentIsTopLevel = true;
parentView = GetParentViewForRoot();
}
if (aPO->mViewManager->GetRootView()) {
// Reuse the root view that is already on the root frame.
rootView = aPO->mViewManager->GetRootView();
// Remove it from its existing parent if necessary
aPO->mViewManager->RemoveChild(rootView);
rootView->SetParent(parentView);
} else {
// Create a child window of the parent that is our "root view/window"
nsRect tbounds = nsRect(nsPoint(0, 0), adjSize);
rootView = aPO->mViewManager->CreateView(tbounds, parentView);
NS_ENSURE_TRUE(rootView, NS_ERROR_OUT_OF_MEMORY);
}
if (mIsCreatingPrintPreview && documentIsTopLevel) {
aPO->mPresContext->SetPaginatedScrolling(canCreateScrollbars);
}
// Setup hierarchical relationship in view manager
aPO->mViewManager->SetRootView(rootView);
return NS_OK;
}
// Reflow a nsPrintObject
nsresult nsPrintJob::ReflowPrintObject(const UniquePtr<nsPrintObject>& aPO) {
NS_ENSURE_STATE(aPO);
if (!aPO->PrintingIsEnabled()) {
return NS_OK;
}
NS_ASSERTION(!aPO->mPresContext, "Recreating prescontext");
// Guarantee that mPrt and the objects it owns won't be deleted in this method
// because it might be cleared if other modules called from here may fire
// events, notifying observers and/or listeners.
RefPtr<nsPrintData> printData = mPrt;
// create the PresContext
nsPresContext::nsPresContextType type =
mIsCreatingPrintPreview ? nsPresContext::eContext_PrintPreview
: nsPresContext::eContext_Print;
const bool shouldBeRoot =
(!aPO->mParent || !aPO->mParent->PrintingIsEnabled()) &&
!GetParentViewForRoot();
aPO->mPresContext = shouldBeRoot ? new nsRootPresContext(aPO->mDocument, type)
: new nsPresContext(aPO->mDocument, type);
aPO->mPresContext->SetPrintSettings(printData->mPrintSettings);
// init it with the DC
MOZ_TRY(aPO->mPresContext->Init(printData->mPrintDC));
aPO->mViewManager = new nsViewManager();
MOZ_TRY(aPO->mViewManager->Init(printData->mPrintDC));
aPO->mPresShell =
aPO->mDocument->CreatePresShell(aPO->mPresContext, aPO->mViewManager);
if (!aPO->mPresShell) {
return NS_ERROR_FAILURE;
}
// If we're printing selection then remove the nonselected nodes from our
// cloned document.
if (printData->mPrintSettings->GetPrintSelectionOnly()) {
// If we fail to remove the nodes then we should fail to print, because if
// the user was trying to print a small selection from a large document,
// sending the whole document to a real printer would be very frustrating.
MOZ_TRY(DeleteNonSelectedNodes(*aPO->mDocument));
}
bool doReturn = false;
bool documentIsTopLevel = false;
nsSize adjSize;
nsresult rv = SetRootView(aPO.get(), doReturn, documentIsTopLevel, adjSize);
if (NS_FAILED(rv) || doReturn) {
return rv;
}
PR_PL(("In DV::ReflowPrintObject PO: %p pS: %p (%9s) Setting w,h to %d,%d\n",
aPO.get(), aPO->mPresShell.get(), gFrameTypesStr[aPO->mFrameType],
adjSize.width, adjSize.height));
aPO->mPresShell->BeginObservingDocument();
// Here, we inform nsPresContext of the page size. Note that 'adjSize' is
// *usually* the page size, but we need to check. Strictly speaking, adjSize
// is the *device output size*, which is really the dimensions of a "sheet"
// rather than a "page" (an important distinction in an N-pages-per-sheet
// scenario). For some pages-per-sheet values, the pages are orthogonal to
// the sheet; we adjust for that here by swapping the width with the height.
nsSize pageSize = adjSize;
if (printData->mPrintSettings->HasOrthogonalSheetsAndPages()) {
std::swap(pageSize.width, pageSize.height);
}
aPO->mPresContext->SetPageSize(pageSize);
int32_t p2a = aPO->mPresContext->DeviceContext()->AppUnitsPerDevPixel();
if (documentIsTopLevel && mIsCreatingPrintPreview) {
if (nsCOMPtr<nsIContentViewer> cv = do_QueryInterface(mDocViewerPrint)) {
// If we're print-previewing and the top level document, use the bounds
// from our doc viewer. Page bounds is not what we want.
nsIntRect bounds;
cv->GetBounds(bounds);
adjSize = nsSize(bounds.width * p2a, bounds.height * p2a);
}
}
aPO->mPresContext->SetVisibleArea(nsRect(nsPoint(), adjSize));
aPO->mPresContext->SetIsRootPaginatedDocument(documentIsTopLevel);
aPO->mPresContext->SetPageScale(aPO->mZoomRatio);
// Calculate scale factor from printer to screen
float printDPI = float(AppUnitsPerCSSInch()) / float(p2a);
aPO->mPresContext->SetPrintPreviewScale(mScreenDPI / printDPI);
if (mIsCreatingPrintPreview && documentIsTopLevel) {
mDocViewerPrint->SetPrintPreviewPresentation(
aPO->mViewManager, aPO->mPresContext, aPO->mPresShell.get());
}
MOZ_TRY(aPO->mPresShell->Initialize());
NS_ASSERTION(aPO->mPresShell, "Presshell should still be here");
// Process the reflow event Initialize posted
RefPtr<PresShell> presShell = aPO->mPresShell;
presShell->FlushPendingNotifications(FlushType::Layout);
MOZ_TRY(UpdateSelectionAndShrinkPrintObject(aPO.get(), documentIsTopLevel));
#ifdef EXTENDED_DEBUG_PRINTING
if (MOZ_LOG_TEST(gPrintingLog, DUMP_LAYOUT_LEVEL)) {
nsAutoCString docStr;
nsAutoCString urlStr;
GetDocTitleAndURL(aPO, docStr, urlStr);
char filename[256];
sprintf(filename, "print_dump_%d.txt", gDumpFileNameCnt++);
// Dump all the frames and view to a a file
FILE* fd = fopen(filename, "w");
if (fd) {
nsIFrame* theRootFrame = aPO->mPresShell->GetRootFrame();
fprintf(fd, "Title: %s\n", docStr.get());
fprintf(fd, "URL: %s\n", urlStr.get());
fprintf(fd, "--------------- Frames ----------------\n");
// RefPtr<gfxContext> renderingContext =
// printData->mPrintDocDC->CreateRenderingContext();
RootFrameList(aPO->mPresContext, fd, 0);
// DumpFrames(fd, aPO->mPresContext, renderingContext, theRootFrame, 0);
fprintf(fd, "---------------------------------------\n\n");
fprintf(fd, "--------------- Views From Root Frame----------------\n");
nsView* v = theRootFrame->GetView();
if (v) {
v->List(fd);
} else {
printf("View is null!\n");
}
if (aPO->mDocShell) {
fprintf(fd, "--------------- All Views ----------------\n");
DumpViews(aPO->mDocShell, fd);
fprintf(fd, "---------------------------------------\n\n");
}
fclose(fd);
}
}
#endif
return NS_OK;
}
//-------------------------------------------------------
// Figure out how many documents and how many total pages we are printing
void nsPrintJob::CalcNumPrintablePages(int32_t& aNumPages) {
aNumPages = 0;
// Count the number of printable documents
// and printable pages
for (uint32_t i = 0; i < mPrt->mPrintDocList.Length(); i++) {
nsPrintObject* po = mPrt->mPrintDocList.ElementAt(i);
NS_ASSERTION(po, "nsPrintObject can't be null!");
// Note: The po->mPresContext null-check below is necessary, because it's
// possible po->mPresContext might never have been set. (e.g., if
// PrintingIsEnabled() returns false, ReflowPrintObject bails before setting
// mPresContext)
if (po->mPresContext && po->mPresContext->IsRootPaginatedDocument()) {
nsPageSequenceFrame* seqFrame = po->mPresShell->GetPageSequenceFrame();
if (seqFrame) {
aNumPages += seqFrame->PrincipalChildList().GetLength();
}
}
}
}
//-----------------------------------------------------------------
//-- Done: Reflow Methods
//-----------------------------------------------------------------
//-----------------------------------------------------------------
//-- Section: Printing Methods
//-----------------------------------------------------------------
//-------------------------------------------------------
// Called for each DocShell that needs to be printed
bool nsPrintJob::PrintDocContent(const UniquePtr<nsPrintObject>& aPO,
nsresult& aStatus) {
NS_ASSERTION(aPO, "Pointer is null!");
aStatus = NS_OK;
if (!aPO->mHasBeenPrinted && aPO->PrintingIsEnabled()) {
aStatus = DoPrint(aPO);
return true;
}
// If |aPO->mHasBeenPrinted| is true,
// the kids frames are already processed in |PrintPage|.
// XXX This should be removed. Since bug 1552785 it has no longer been
// possible for us to have to print multiple subdocuments consecutively.
if (!aPO->mHasBeenPrinted && !aPO->mInvisible) {
for (const UniquePtr<nsPrintObject>& po : aPO->mKids) {
bool printed = PrintDocContent(po, aStatus);
if (printed || NS_FAILED(aStatus)) {
return true;
}
}
}
return false;
}
// A helper struct to aid with DeleteNonSelectedNodes.
struct MOZ_STACK_CLASS SelectionRangeState {
explicit SelectionRangeState(RefPtr<Selection> aSelection)
: mSelection(std::move(aSelection)) {
MOZ_ASSERT(mSelection);
MOZ_ASSERT(!mSelection->RangeCount());
}
// Selects all the nodes that are _not_ included in a given set of ranges.
MOZ_CAN_RUN_SCRIPT void SelectComplementOf(Span<const RefPtr<nsRange>>);
// Removes the selected ranges from the document.
MOZ_CAN_RUN_SCRIPT void RemoveSelectionFromDocument();
private:
struct Position {
nsINode* mNode;
uint32_t mOffset;
};
MOZ_CAN_RUN_SCRIPT void SelectRange(nsRange*);
MOZ_CAN_RUN_SCRIPT void SelectNodesExcept(const Position& aStart,
const Position& aEnd);
MOZ_CAN_RUN_SCRIPT void SelectNodesExceptInSubtree(const Position& aStart,
const Position& aEnd);
// A map from subtree root (document or shadow root) to the start position of
// the non-selected content (so far).
nsTHashMap<nsPtrHashKey<nsINode>, Position> mPositions;
// The selection we're adding the ranges to.
const RefPtr<Selection> mSelection;
};
void SelectionRangeState::SelectComplementOf(
Span<const RefPtr<nsRange>> aRanges) {
for (const auto& range : aRanges) {
auto start = Position{range->GetStartContainer(), range->StartOffset()};
auto end = Position{range->GetEndContainer(), range->EndOffset()};
SelectNodesExcept(start, end);
}
}
void SelectionRangeState::SelectRange(nsRange* aRange) {
if (aRange && !aRange->Collapsed()) {
mSelection->AddRangeAndSelectFramesAndNotifyListeners(*aRange,
IgnoreErrors());
}
}
void SelectionRangeState::SelectNodesExcept(const Position& aStart,
const Position& aEnd) {
SelectNodesExceptInSubtree(aStart, aEnd);
if (auto* shadow = ShadowRoot::FromNode(aStart.mNode->SubtreeRoot())) {
auto* host = shadow->Host();
SelectNodesExcept(Position{host, 0}, Position{host, host->GetChildCount()});
} else {
MOZ_ASSERT(aStart.mNode->IsInUncomposedDoc());
}
}
void SelectionRangeState::SelectNodesExceptInSubtree(const Position& aStart,
const Position& aEnd) {
static constexpr auto kEllipsis = u"\x2026"_ns;
nsINode* root = aStart.mNode->SubtreeRoot();
auto& start =
mPositions.WithEntryHandle(root, [&](auto&& entry) -> Position& {
return entry.OrInsertWith([&] { return Position{root, 0}; });
});
bool ellipsizedStart = false;
if (auto* text = Text::FromNode(aStart.mNode)) {
if (start.mNode != text && aStart.mOffset &&
aStart.mOffset < text->Length()) {
text->InsertData(aStart.mOffset, kEllipsis, IgnoreErrors());
ellipsizedStart = true;
}
}
RefPtr<nsRange> range = nsRange::Create(
start.mNode, start.mOffset, aStart.mNode, aStart.mOffset, IgnoreErrors());
SelectRange(range);
start = aEnd;
// If we added an ellipsis at the start and the end position was relative to
// the same node account for it here.
if (ellipsizedStart && aStart.mNode == aEnd.mNode) {
start.mOffset += kEllipsis.Length();
}
// If the end is mid text then add an ellipsis.
if (auto* text = Text::FromNode(start.mNode)) {
if (start.mOffset && start.mOffset < text->Length()) {
text->InsertData(start.mOffset, kEllipsis, IgnoreErrors());
start.mOffset += kEllipsis.Length();
}
}
}
void SelectionRangeState::RemoveSelectionFromDocument() {
for (auto& entry : mPositions) {
const Position& pos = entry.GetData();
nsINode* root = entry.GetKey();
RefPtr<nsRange> range = nsRange::Create(
pos.mNode, pos.mOffset, root, root->GetChildCount(), IgnoreErrors());
SelectRange(range);
}
mSelection->DeleteFromDocument(IgnoreErrors());
}
/**
* Builds the complement set of ranges and adds those to the selection.
* Deletes all of the nodes contained in the complement set of ranges
* leaving behind only nodes that were originally selected.
* Adds ellipses to a selected node's text if text is truncated by a range.
* This is used to implement the "Print Selection Only" user interface option.
*/
MOZ_CAN_RUN_SCRIPT_BOUNDARY static nsresult DeleteNonSelectedNodes(
Document& aDoc) {
MOZ_ASSERT(aDoc.IsStaticDocument());
const auto* printRanges = static_cast<nsTArray<RefPtr<nsRange>>*>(
aDoc.GetProperty(nsGkAtoms::printselectionranges));
if (!printRanges) {
return NS_OK;
}
PresShell* presShell = aDoc.GetPresShell();
NS_ENSURE_STATE(presShell);
RefPtr<Selection> selection =
presShell->GetCurrentSelection(SelectionType::eNormal);
NS_ENSURE_STATE(selection);
SelectionRangeState state(std::move(selection));
state.SelectComplementOf(*printRanges);
state.RemoveSelectionFromDocument();
return NS_OK;
}
//-------------------------------------------------------
nsresult nsPrintJob::DoPrint(const UniquePtr<nsPrintObject>& aPO) {
PR_PL(("\n"));
PR_PL(("**************************** %s ****************************\n",
gFrameTypesStr[aPO->mFrameType]));
PR_PL(("****** In DV::DoPrint PO: %p \n", aPO.get()));
PresShell* poPresShell = aPO->mPresShell;
nsPresContext* poPresContext = aPO->mPresContext;
NS_ASSERTION(poPresContext, "PrintObject has not been reflowed");
NS_ASSERTION(poPresContext->Type() != nsPresContext::eContext_PrintPreview,
"How did this context end up here?");
// Guarantee that mPrt and the objects it owns won't be deleted in this method
// because it might be cleared if other modules called from here may fire
// events, notifying observers and/or listeners.
RefPtr<nsPrintData> printData = mPrt;
if (NS_WARN_IF(!printData)) {
return NS_ERROR_FAILURE;
}
if (printData->mPrintProgressParams) {
SetURLAndTitleOnProgressParams(aPO, printData->mPrintProgressParams);
}
{
// Ask the page sequence frame to print all the pages
nsPageSequenceFrame* seqFrame = poPresShell->GetPageSequenceFrame();
MOZ_ASSERT(seqFrame, "no page sequence frame");
// We are done preparing for printing, so we can turn this off
printData->mPreparingForPrint = false;
#ifdef EXTENDED_DEBUG_PRINTING
nsIFrame* rootFrame = poPresShell->GetRootFrame();
if (aPO->PrintingIsEnabled()) {
nsAutoCString docStr;
nsAutoCString urlStr;
GetDocTitleAndURL(aPO, docStr, urlStr);
DumpLayoutData(docStr.get(), urlStr.get(), poPresContext,
printData->mPrintDC, rootFrame, aPO->mDocShell, nullptr);
}
#endif
if (!printData->mPrintSettings) {
// not sure what to do here!
SetIsPrinting(false);
return NS_ERROR_FAILURE;
}
nsAutoString docTitleStr;
nsAutoString docURLStr;
GetDisplayTitleAndURL(*aPO->mDocument, mPrt->mPrintSettings,
DocTitleDefault::eFallback, docTitleStr, docURLStr);
if (!seqFrame) {
SetIsPrinting(false);
return NS_ERROR_FAILURE;
}
// For telemetry, get paper size being used; convert the dimensions to
// points and ensure they reflect portrait orientation.
nsIPrintSettings* settings = printData->mPrintSettings;
double paperWidth, paperHeight;
settings->GetPaperWidth(&paperWidth);
settings->GetPaperHeight(&paperHeight);
int16_t sizeUnit;
settings->GetPaperSizeUnit(&sizeUnit);
switch (sizeUnit) {
case nsIPrintSettings::kPaperSizeInches:
paperWidth *= 72.0;
paperHeight *= 72.0;
break;
case nsIPrintSettings::kPaperSizeMillimeters:
paperWidth *= 72.0 / 25.4;
paperHeight *= 72.0 / 25.4;
break;
default:
MOZ_ASSERT_UNREACHABLE("unknown paper size unit");
break;
}
if (paperWidth > paperHeight) {
std::swap(paperWidth, paperHeight);
}
// Use the paper size to build a Telemetry Scalar key.
nsString key;
key.AppendInt(int32_t(NS_round(paperWidth)));
key.Append(u"x");
key.AppendInt(int32_t(NS_round(paperHeight)));
Telemetry::ScalarAdd(Telemetry::ScalarID::PRINTING_PAPER_SIZE, key, 1);
mPageSeqFrame = seqFrame;
seqFrame->StartPrint(poPresContext, settings, docTitleStr, docURLStr);
// Schedule Page to Print
PR_PL(("Scheduling Print of PO: %p (%s) \n", aPO.get(),
gFrameTypesStr[aPO->mFrameType]));
StartPagePrintTimer(aPO);
}
return NS_OK;
}
//---------------------------------------------------------------------
void nsPrintJob::SetURLAndTitleOnProgressParams(
const UniquePtr<nsPrintObject>& aPO, nsIPrintProgressParams* aParams) {
NS_ASSERTION(aPO, "Must have valid nsPrintObject");
NS_ASSERTION(aParams, "Must have valid nsIPrintProgressParams");
if (!aPO || !aPO->mDocShell || !aParams) {
return;
}
const uint32_t kTitleLength = 64;
nsAutoString docTitleStr;
nsAutoString docURLStr;
GetDisplayTitleAndURL(*aPO->mDocument, mPrt->mPrintSettings,
DocTitleDefault::eDocURLElseFallback, docTitleStr,
docURLStr);
// Make sure the Titles & URLS don't get too long for the progress dialog
EllipseLongString(docTitleStr, kTitleLength, false);
EllipseLongString(docURLStr, kTitleLength, true);
aParams->SetDocTitle(docTitleStr);
aParams->SetDocURL(docURLStr);
}
//---------------------------------------------------------------------
void nsPrintJob::EllipseLongString(nsAString& aStr, const uint32_t aLen,
bool aDoFront) {
// Make sure the URLS don't get too long for the progress dialog
if (aLen >= 3 && aStr.Length() > aLen) {
if (aDoFront) {
nsAutoString newStr;
newStr.AppendLiteral("...");
newStr += Substring(aStr, aStr.Length() - (aLen - 3), aLen - 3);
aStr = newStr;
} else {
aStr.SetLength(aLen - 3);
aStr.AppendLiteral("...");
}
}
}
//-------------------------------------------------------
bool nsPrintJob::PrePrintSheet() {
NS_ASSERTION(mPageSeqFrame.IsAlive(), "mPageSeqFrame is not alive!");
NS_ASSERTION(mPrt, "mPrt is null!");
// Although these should NEVER be nullptr
// This is added insurance, to make sure we don't crash in optimized builds
if (!mPrt || !mPageSeqFrame.IsAlive()) {
return true; // means we are done preparing the sheet.
}
// Guarantee that mPrt won't be deleted during a call of
// FirePrintingErrorEvent().
RefPtr<nsPrintData> printData = mPrt;
// Check setting to see if someone request it be cancelled
bool isCancelled = false;
printData->mPrintSettings->GetIsCancelled(&isCancelled);
if (isCancelled) return true;
// Ask mPageSeqFrame if the sheet is ready to be printed.
// If the sheet doesn't get printed at all, the |done| will be |true|.
bool done = false;
nsPageSequenceFrame* pageSeqFrame = do_QueryFrame(mPageSeqFrame.GetFrame());
nsresult rv = pageSeqFrame->PrePrintNextSheet(mPagePrintTimer, &done);
if (NS_FAILED(rv)) {
// ??? ::PrintSheet doesn't set |printData->mIsAborted = true| if
// rv != NS_ERROR_ABORT, but I don't really understand why this should be
// the right thing to do? Shouldn't |printData->mIsAborted| set to true
// all the time if something went wrong?
if (rv != NS_ERROR_ABORT) {
FirePrintingErrorEvent(rv);
printData->mIsAborted = true;
}
done = true;
}
return done;
}
bool nsPrintJob::PrintSheet(nsPrintObject* aPO, bool& aInRange) {
NS_ASSERTION(aPO, "aPO is null!");
NS_ASSERTION(mPageSeqFrame.IsAlive(), "mPageSeqFrame is not alive!");
NS_ASSERTION(mPrt, "mPrt is null!");
// XXXdholbert Nowadays, this function doesn't need to concern itself with
// page ranges -- page-range handling is now handled when we reflow our
// PrintedSheetFrames, and all PrintedSheetFrames are "in-range" and should
// be printed. So this outparam is unconditionally true. Bug 1669815 is filed
// on removing it entirely.
aInRange = true;
// Although these should NEVER be nullptr
// This is added insurance, to make sure we don't crash in optimized builds
if (!mPrt || !aPO || !mPageSeqFrame.IsAlive()) {
FirePrintingErrorEvent(NS_ERROR_FAILURE);
return true; // means we are done printing
}
// Guarantee that mPrt won't be deleted during a call of
// nsPrintData::DoOnProgressChange() which runs some listeners,
// which may clear (& might otherwise destroy).
RefPtr<nsPrintData> printData = mPrt;
PR_PL(("-----------------------------------\n"));
PR_PL(("------ In DV::PrintSheet PO: %p (%s)\n", aPO,
gFrameTypesStr[aPO->mFrameType]));
// Check setting to see if someone request it be cancelled
bool isCancelled = false;
printData->mPrintSettings->GetIsCancelled(&isCancelled);
if (isCancelled || printData->mIsAborted) {
return true;
}
nsPageSequenceFrame* pageSeqFrame = do_QueryFrame(mPageSeqFrame.GetFrame());
const uint32_t sheetIdx = pageSeqFrame->GetCurrentSheetIdx();
const uint32_t numSheets = pageSeqFrame->PrincipalChildList().GetLength();
PR_PL(("****** Printing sheet index %d of %d sheets(s)\n", sheetIdx,
numSheets));
MOZ_ASSERT(numSheets > 0, "print operations must have at least 1 sheet");
MOZ_ASSERT(sheetIdx < numSheets,
"sheetIdx shouldn't be allowed to go out of bounds");
printData->DoOnProgressChange(sheetIdx, numSheets, false, 0);
if (NS_WARN_IF(mPrt != printData)) {
// If current printing is canceled or new print is started, let's return
// true to notify the caller of current printing is done.
return true;
}
if (XRE_IsParentProcess() && !printData->mPrintDC->IsSyncPagePrinting()) {
mPagePrintTimer->WaitForRemotePrint();
}
// Print the sheet
// if a print job was cancelled externally, an EndPage or BeginPage may
// fail and the failure is passed back here.
// Returning true means we are done printing.
//
// When rv == NS_ERROR_ABORT, it means we want out of the
// print job without displaying any error messages
nsresult rv = pageSeqFrame->PrintNextSheet();
if (NS_FAILED(rv)) {
if (rv != NS_ERROR_ABORT) {
FirePrintingErrorEvent(rv);
printData->mIsAborted = true;
}
return true;
}
pageSeqFrame->DoPageEnd();
// If we just printed the final sheet (the one with index "numSheets-1"),
// then we're done!
return (sheetIdx == numSheets - 1);
}
void nsPrintJob::PageDone(nsresult aResult) {
MOZ_ASSERT(mIsDoingPrinting);
// mPagePrintTimer might be released during RemotePrintFinished, keep a
// reference here to make sure it lives long enough.
RefPtr<nsPagePrintTimer> timer = mPagePrintTimer;
timer->RemotePrintFinished();
}
//-----------------------------------------------------------------
//-- Done: Printing Methods
//-----------------------------------------------------------------
//-----------------------------------------------------------------
//-- Section: Misc Support Methods
//-----------------------------------------------------------------
//---------------------------------------------------------------------
void nsPrintJob::SetIsPrinting(bool aIsPrinting) {
mIsDoingPrinting = aIsPrinting;
if (aIsPrinting) {
mHasEverPrinted = true;
}
if (mPrt && aIsPrinting) {
mPrt->mPreparingForPrint = true;
}
}
//---------------------------------------------------------------------
void nsPrintJob::SetIsPrintPreview(bool aIsPrintPreview) {
mCreatedForPrintPreview = aIsPrintPreview;
if (mDocViewerPrint) {
mDocViewerPrint->SetIsPrintPreview(aIsPrintPreview);
}
}
Document* nsPrintJob::FindFocusedDocument(Document* aDoc) const {
nsFocusManager* fm = nsFocusManager::GetFocusManager();
NS_ENSURE_TRUE(fm, nullptr);
nsPIDOMWindowOuter* window = aDoc->GetOriginalDocument()->GetWindow();
NS_ENSURE_TRUE(window, nullptr);
nsCOMPtr<nsPIDOMWindowOuter> rootWindow = window->GetPrivateRoot();
NS_ENSURE_TRUE(rootWindow, nullptr);
nsCOMPtr<nsPIDOMWindowOuter> focusedWindow;
nsFocusManager::GetFocusedDescendant(rootWindow,
nsFocusManager::eIncludeAllDescendants,
getter_AddRefs(focusedWindow));
NS_ENSURE_TRUE(focusedWindow, nullptr);
if (IsWindowsInOurSubTree(focusedWindow)) {
return focusedWindow->GetDoc();
}
return nullptr;
}
//---------------------------------------------------------------------
bool nsPrintJob::IsWindowsInOurSubTree(nsPIDOMWindowOuter* window) const {
if (window) {
nsCOMPtr<nsIDocShell> ourDocShell(do_QueryReferent(mDocShell));
if (ourDocShell) {
BrowsingContext* ourBC = ourDocShell->GetBrowsingContext();
BrowsingContext* bc = window->GetBrowsingContext();
while (bc) {
if (bc == ourBC) {
return true;
}
bc = bc->GetParent();
}
}
}
return false;
}
//-------------------------------------------------------
bool nsPrintJob::DonePrintingSheets(nsPrintObject* aPO, nsresult aResult) {
// NS_ASSERTION(aPO, "Pointer is null!");
PR_PL(("****** In DV::DonePrintingSheets PO: %p (%s)\n", aPO,
aPO ? gFrameTypesStr[aPO->mFrameType] : ""));
// If there is a pageSeqFrame, make sure there are no more printCanvas active
// that might call |Notify| on the pagePrintTimer after things are cleaned up
// and printing was marked as being done.
if (mPageSeqFrame.IsAlive()) {
nsPageSequenceFrame* pageSeqFrame = do_QueryFrame(mPageSeqFrame.GetFrame());
pageSeqFrame->ResetPrintCanvasList();
}
// Guarantee that mPrt and mPrt->mPrintObject won't be deleted during a
// call of PrintDocContent() and FirePrintCompletionEvent().
RefPtr<nsPrintData> printData = mPrt;
if (aPO && !printData->mIsAborted) {
aPO->mHasBeenPrinted = true;
nsresult rv;
bool didPrint = PrintDocContent(printData->mPrintObject, rv);
if (NS_SUCCEEDED(rv) && didPrint) {
PR_PL(
("****** In DV::DonePrintingSheets PO: %p (%s) didPrint:%s (Not Done "
"Printing)\n",
aPO, gFrameTypesStr[aPO->mFrameType], PRT_YESNO(didPrint)));
return false;
}
}
if (XRE_IsParentProcess() && printData->mPrintDC &&
!printData->mPrintDC->IsSyncPagePrinting()) {
printData->mPrintDC->UnregisterPageDoneCallback();
}
if (NS_SUCCEEDED(aResult)) {
FirePrintCompletionEvent();
// XXX mPrt may be cleared or replaced with new instance here.
// However, the following methods will clean up with new mPrt or will
// do nothing due to no proper nsPrintData instance.
}
SetIsPrinting(false);
// Release reference to mPagePrintTimer; the timer object destroys itself
// after this returns true
DisconnectPagePrintTimer();
return true;
}
//-------------------------------------------------------
nsresult nsPrintJob::EnablePOsForPrinting() {
// Guarantee that mPrt and the objects it owns won't be deleted.
RefPtr<nsPrintData> printData = mPrt;
// NOTE: All POs have been "turned off" for printing
// this is where we decided which POs get printed.
if (!printData || !printData->mPrintSettings) {
return NS_ERROR_FAILURE;
}
PR_PL(("\n"));
PR_PL(("********* nsPrintJob::EnablePOsForPrinting *********\n"));
if (!printData->mPrintSettings->GetPrintSelectionOnly()) {
printData->mPrintObject->EnablePrinting(true);
return NS_OK;
}
// This means we are either printing a selected iframe or
// we are printing the current selection.
NS_ENSURE_STATE(!mDisallowSelectionPrint && printData->mSelectionRoot);
// If mSelectionRoot is a selected iframe without a selection, then just
// enable normally from that point.
if (printData->mSelectionRoot->mFrameType == eIFrame &&
!printData->mSelectionRoot->HasSelection()) {
printData->mSelectionRoot->EnablePrinting(true);
} else {
// Otherwise, only enable nsPrintObjects that have a selection.
printData->mSelectionRoot->EnablePrintingSelectionOnly();
}
return NS_OK;
}
//-------------------------------------------------------
// Return the nsPrintObject with that is XMost (The widest frameset frame) AND
// contains the XMost (widest) layout frame
nsPrintObject* nsPrintJob::FindSmallestSTF() {
float smallestRatio = 1.0f;
nsPrintObject* smallestPO = nullptr;
for (uint32_t i = 0; i < mPrt->mPrintDocList.Length(); i++) {
nsPrintObject* po = mPrt->mPrintDocList.ElementAt(i);
NS_ASSERTION(po, "nsPrintObject can't be null!");
if (po->mFrameType != eFrameSet && po->mFrameType != eIFrame) {
if (po->mShrinkRatio < smallestRatio) {
smallestRatio = po->mShrinkRatio;
smallestPO = po;
}
}
}
#ifdef EXTENDED_DEBUG_PRINTING
if (smallestPO)
printf("*PO: %p Type: %d %10.3f\n", smallestPO, smallestPO->mFrameType,
smallestPO->mShrinkRatio);
#endif
return smallestPO;
}
//-----------------------------------------------------------------
//-- Done: Misc Support Methods
//-----------------------------------------------------------------
//-----------------------------------------------------------------
//-- Section: Finishing up or Cleaning up
//-----------------------------------------------------------------
//-----------------------------------------------------------------
void nsPrintJob::CloseProgressDialog(
nsIWebProgressListener* aWebProgressListener) {
if (aWebProgressListener) {
aWebProgressListener->OnStateChange(
nullptr, nullptr,
nsIWebProgressListener::STATE_STOP |
nsIWebProgressListener::STATE_IS_DOCUMENT,
NS_OK);
}
}
//-----------------------------------------------------------------
nsresult nsPrintJob::FinishPrintPreview() {
nsresult rv = NS_OK;
#ifdef NS_PRINT_PREVIEW
// If mPrt is null we've already finished with print preview. If mPrt is not
// null but mIsCreatingPrintPreview is false FinishPrintPreview must have
// already failed due to DocumentReadyForPrinting failing.
if (!mPrt || !mIsCreatingPrintPreview) {
return rv;
}
rv = DocumentReadyForPrinting();
// Note that this method may be called while the instance is being
// initialized. Some methods which initialize the instance (e.g.,
// DoCommonPrint) may need to stop initializing and return error if
// this is called. Therefore it's important to set mIsCreatingPrintPreview
// state to false here. If you need to stop setting that here, you need to
// keep them being able to check whether the owner stopped using this
// instance.
mIsCreatingPrintPreview = false;
// mPrt may be cleared during a call of nsPrintData::OnEndPrinting()
// because that method invokes some arbitrary listeners.
RefPtr<nsPrintData> printData = mPrt;
if (NS_FAILED(rv)) {
/* cleanup done, let's fire-up an error dialog to notify the user
* what went wrong...
*/
printData->OnEndPrinting();
return rv;
}
if (mPrintPreviewCallback) {
const bool hasSelection =
!mDisallowSelectionPrint && printData->mSelectionRoot;
mPrintPreviewCallback(PrintPreviewResultInfo(
GetPrintPreviewNumSheets(), GetRawNumPages(), GetIsEmpty(),
hasSelection, hasSelection && printData->mPrintObject->HasSelection()));
mPrintPreviewCallback = nullptr;
}
// At this point we are done preparing everything
// before it is to be created
printData->OnEndPrinting();
// XXX If mPrt becomes nullptr or different instance here, what should we
// do?
// PrintPreview was built using the mPrt (code reuse)
// then we assign it over
mPrtPreview = std::move(mPrt);
#endif // NS_PRINT_PREVIEW
return NS_OK;
}
//-----------------------------------------------------------------
//-- Done: Finishing up or Cleaning up
//-----------------------------------------------------------------
/*=============== Timer Related Code ======================*/
nsresult nsPrintJob::StartPagePrintTimer(const UniquePtr<nsPrintObject>& aPO) {
if (!mPagePrintTimer) {
// Get the delay time in between the printing of each page
// this gives the user more time to press cancel
int32_t printPageDelay = 50;
mPrt->mPrintSettings->GetPrintPageDelay(&printPageDelay);
nsCOMPtr<nsIContentViewer> cv = do_QueryInterface(mDocViewerPrint);
NS_ENSURE_TRUE(cv, NS_ERROR_FAILURE);
nsCOMPtr<Document> doc = cv->GetDocument();
NS_ENSURE_TRUE(doc, NS_ERROR_FAILURE);
mPagePrintTimer =
new nsPagePrintTimer(this, mDocViewerPrint, doc, printPageDelay);
nsCOMPtr<nsIPrintSession> printSession;
nsresult rv =
mPrt->mPrintSettings->GetPrintSession(getter_AddRefs(printSession));
if (NS_SUCCEEDED(rv) && printSession) {
RefPtr<layout::RemotePrintJobChild> remotePrintJob =
printSession->GetRemotePrintJob();
if (remotePrintJob) {
remotePrintJob->SetPagePrintTimer(mPagePrintTimer);
remotePrintJob->SetPrintJob(this);
}
}
}
return mPagePrintTimer->Start(aPO.get());
}
/*=============== nsIObserver Interface ======================*/
MOZ_CAN_RUN_SCRIPT_BOUNDARY NS_IMETHODIMP nsPrintJob::Observe(
nsISupports* aSubject, const char* aTopic, const char16_t* aData) {
// We expect to be called by nsIPrintingPromptService after we were passed to
// it by via the nsIPrintingPromptService::ShowPrintProgressDialog call in
// ShowPrintProgress. Once it has opened the progress dialog it calls this
// method, passing null as the topic.
if (aTopic) {
return NS_OK;
}
nsresult rv = InitPrintDocConstruction(true);
if (!mIsDoingPrinting && mPrtPreview) {
RefPtr<nsPrintData> printDataOfPrintPreview = mPrtPreview;
printDataOfPrintPreview->OnEndPrinting();
}
return rv;
}
//---------------------------------------------------------------
//-- PLEvent Notification
//---------------------------------------------------------------
class nsPrintCompletionEvent : public Runnable {
public:
explicit nsPrintCompletionEvent(nsIDocumentViewerPrint* docViewerPrint)
: mozilla::Runnable("nsPrintCompletionEvent"),
mDocViewerPrint(docViewerPrint) {
NS_ASSERTION(mDocViewerPrint, "mDocViewerPrint is null.");
}
NS_IMETHOD Run() override {
if (mDocViewerPrint) mDocViewerPrint->OnDonePrinting();
return NS_OK;
}
private:
nsCOMPtr<nsIDocumentViewerPrint> mDocViewerPrint;
};
//-----------------------------------------------------------
void nsPrintJob::FirePrintCompletionEvent() {
MOZ_ASSERT(NS_IsMainThread());
nsCOMPtr<nsIRunnable> event = new nsPrintCompletionEvent(mDocViewerPrint);
nsCOMPtr<nsIContentViewer> cv = do_QueryInterface(mDocViewerPrint);
NS_ENSURE_TRUE_VOID(cv);
nsCOMPtr<Document> doc = cv->GetDocument();
NS_ENSURE_TRUE_VOID(doc);
NS_ENSURE_SUCCESS_VOID(doc->Dispatch(TaskCategory::Other, event.forget()));
}
void nsPrintJob::DisconnectPagePrintTimer() {
if (mPagePrintTimer) {
mPagePrintTimer->Disconnect();
mPagePrintTimer = nullptr;
}
}
//---------------------------------------------------------------
//---------------------------------------------------------------
//-- Debug helper routines
//---------------------------------------------------------------
//---------------------------------------------------------------
#if defined(XP_WIN) && defined(EXTENDED_DEBUG_PRINTING)
# include <windows.h>
# include <process.h>
# include <direct.h>
# define MY_FINDFIRST(a, b) FindFirstFile(a, b)
# define MY_FINDNEXT(a, b) FindNextFile(a, b)
# define ISDIR(a) (a.dwFileAttributes & FILE_ATTRIBUTE_DIRECTORY)
# define MY_FINDCLOSE(a) FindClose(a)
# define MY_FILENAME(a) a.cFileName
# define MY_FILESIZE(a) (a.nFileSizeHigh * MAXDWORD) + a.nFileSizeLow
int RemoveFilesInDir(const char* aDir) {
WIN32_FIND_DATA data_ptr;
HANDLE find_handle;
char path[MAX_PATH];
strcpy(path, aDir);
// Append slash to the end of the directory names if not there
if (path[strlen(path) - 1] != '\\') strcat(path, "\\");
char findPath[MAX_PATH];
strcpy(findPath, path);
strcat(findPath, "*.*");
find_handle = MY_FINDFIRST(findPath, &data_ptr);
if (find_handle != INVALID_HANDLE_VALUE) {
do {
if (ISDIR(data_ptr) && (stricmp(MY_FILENAME(data_ptr), ".")) &&
(stricmp(MY_FILENAME(data_ptr), ".."))) {
// skip
} else if (!ISDIR(data_ptr)) {
if (!strncmp(MY_FILENAME(data_ptr), "print_dump", 10)) {
char fileName[MAX_PATH];
strcpy(fileName, aDir);
strcat(fileName, "\\");
strcat(fileName, MY_FILENAME(data_ptr));
printf("Removing %s\n", fileName);
remove(fileName);
}
}
} while (MY_FINDNEXT(find_handle, &data_ptr));
MY_FINDCLOSE(find_handle);
}
return TRUE;
}
#endif
#ifdef EXTENDED_DEBUG_PRINTING
/** ---------------------------------------------------
* Dumps Frames for Printing
*/
static void RootFrameList(nsPresContext* aPresContext, FILE* out,
const char* aPrefix) {
if (!aPresContext || !out) return;
if (PresShell* presShell = aPresContext->GetPresShell()) {
nsIFrame* frame = presShell->GetRootFrame();
if (frame) {
frame->List(out, aPrefix);
}
}
}
/** ---------------------------------------------------
* Dumps Frames for Printing
*/
static void DumpFrames(FILE* out, nsPresContext* aPresContext,
gfxContext* aRendContext, nsIFrame* aFrame,
int32_t aLevel) {
NS_ASSERTION(out, "Pointer is null!");
NS_ASSERTION(aPresContext, "Pointer is null!");
NS_ASSERTION(aRendContext, "Pointer is null!");
NS_ASSERTION(aFrame, "Pointer is null!");
nsIFrame* child = aFrame->PrincipalChildList().FirstChild();
while (child != nullptr) {
for (int32_t i = 0; i < aLevel; i++) {
fprintf(out, " ");
}
nsAutoString tmp;
child->GetFrameName(tmp);
fputs(NS_LossyConvertUTF16toASCII(tmp).get(), out);
bool isSelected;
if (child->IsVisibleForPainting()) {
fprintf(out, " %p %s", child, isSelected ? "VIS" : "UVS");
nsRect rect = child->GetRect();
fprintf(out, "[%d,%d,%d,%d] ", rect.x, rect.y, rect.width, rect.height);
fprintf(out, "v: %p ", (void*)child->GetView());
fprintf(out, "\n");
DumpFrames(out, aPresContext, aRendContext, child, aLevel + 1);
child = child->GetNextSibling();
}
}
}
/** ---------------------------------------------------
* Dumps the Views from the DocShell
*/
static void DumpViews(nsIDocShell* aDocShell, FILE* out) {
NS_ASSERTION(aDocShell, "Pointer is null!");
NS_ASSERTION(out, "Pointer is null!");
if (nullptr != aDocShell) {
fprintf(out, "docshell=%p \n", aDocShell);
if (PresShell* presShell = aDocShell->GetPresShell()) {
nsViewManager* vm = presShell->GetViewManager();
if (vm) {
nsView* root = vm->GetRootView();
if (root) {
root->List(out);
}
}
} else {
fputs("null pres shell\n", out);
}
// dump the views of the sub documents
int32_t i, n;
BrowsingContext* bc = nsDocShell::Cast(aDocShell)->GetBrowsingContext();
for (auto& child : bc->Children()) {
if (auto childDS = child->GetDocShell()) {
DumpViews(childAsShell, out);
}
}
}
}
/** ---------------------------------------------------
* Dumps the Views and Frames
*/
void DumpLayoutData(const char* aTitleStr, const char* aURLStr,
nsPresContext* aPresContext, nsDeviceContext* aDC,
nsIFrame* aRootFrame, nsIDocShell* aDocShell,
FILE* aFD = nullptr) {
if (!MOZ_LOG_TEST(gPrintingLog, DUMP_LAYOUT_LEVEL)) {
return;
}
if (aPresContext == nullptr || aDC == nullptr) {
return;
}
# ifdef NS_PRINT_PREVIEW
if (aPresContext->Type() == nsPresContext::eContext_PrintPreview) {
return;
}
# endif
NS_ASSERTION(aRootFrame, "Pointer is null!");
NS_ASSERTION(aDocShell, "Pointer is null!");
// Dump all the frames and view to a a file
char filename[256];
sprintf(filename, "print_dump_layout_%d.txt", gDumpLOFileNameCnt++);
FILE* fd = aFD ? aFD : fopen(filename, "w");
if (fd) {
fprintf(fd, "Title: %s\n", aTitleStr ? aTitleStr : "");
fprintf(fd, "URL: %s\n", aURLStr ? aURLStr : "");
fprintf(fd, "--------------- Frames ----------------\n");
fprintf(fd, "--------------- Frames ----------------\n");
// RefPtr<gfxContext> renderingContext =
// aDC->CreateRenderingContext();
RootFrameList(aPresContext, fd, "");
// DumpFrames(fd, aPresContext, renderingContext, aRootFrame, 0);
fprintf(fd, "---------------------------------------\n\n");
fprintf(fd, "--------------- Views From Root Frame----------------\n");
nsView* v = aRootFrame->GetView();
if (v) {
v->List(fd);
} else {
printf("View is null!\n");
}
if (aDocShell) {
fprintf(fd, "--------------- All Views ----------------\n");
DumpViews(aDocShell, fd);
fprintf(fd, "---------------------------------------\n\n");
}
if (aFD == nullptr) {
fclose(fd);
}
}
}
//-------------------------------------------------------------
static void DumpPrintObjectsList(const nsTArray<nsPrintObject*>& aDocList) {
if (!MOZ_LOG_TEST(gPrintingLog, DUMP_LAYOUT_LEVEL)) {
return;
}
const char types[][3] = {"DC", "FR", "IF", "FS"};
PR_PL(("Doc List\n***************************************************\n"));
PR_PL(
("T P A H PO DocShell Seq Page Root Page# "
"Rect\n"));
for (nsPrintObject* po : aDocList) {
NS_ASSERTION(po, "nsPrintObject can't be null!");
nsIFrame* rootFrame = nullptr;
if (po->mPresShell) {
rootFrame = po->mPresShell->GetRootFrame();
while (rootFrame != nullptr) {
nsPageSequenceFrame* sqf = do_QueryFrame(rootFrame);
if (sqf) {
break;
}
rootFrame = rootFrame->PrincipalChildList().FirstChild();
}
}
PR_PL(("%s %d %d %p %p %p\n", types[po->mFrameType],
po->PrintingIsEnabled(), po->mHasBeenPrinted, po,
po->mDocShell.get(), rootFrame));
}
}
//-------------------------------------------------------------
static void DumpPrintObjectsTree(nsPrintObject* aPO, int aLevel, FILE* aFD) {
if (!MOZ_LOG_TEST(gPrintingLog, DUMP_LAYOUT_LEVEL)) {
return;
}
NS_ASSERTION(aPO, "Pointer is null!");
FILE* fd = aFD ? aFD : stdout;
const char types[][3] = {"DC", "FR", "IF", "FS"};
if (aLevel == 0) {
fprintf(fd,
"DocTree\n***************************************************\n");
fprintf(fd, "T PO DocShell Seq Page Page# Rect\n");
}
for (const auto& po : aPO->mKids) {
NS_ASSERTION(po, "nsPrintObject can't be null!");
for (int32_t k = 0; k < aLevel; k++) fprintf(fd, " ");
fprintf(fd, "%s %p %p\n", types[po->mFrameType], po.get(),
po->mDocShell.get());
}
}
//-------------------------------------------------------------
static void GetDocTitleAndURL(const UniquePtr<nsPrintObject>& aPO,
nsACString& aDocStr, nsACString& aURLStr) {
nsAutoString docTitleStr;
nsAutoString docURLStr;
GetDocumentTitleAndURL(aPO->mDocument, docTitleStr, docURLStr);
CopyUTF16toUTF8(docTitleStr, aDocStr);
CopyUTF16toUTF8(docURLStr, aURLStr);
}
//-------------------------------------------------------------
static void DumpPrintObjectsTreeLayout(const UniquePtr<nsPrintObject>& aPO,
nsDeviceContext* aDC, int aLevel,
FILE* aFD) {
if (!MOZ_LOG_TEST(gPrintingLog, DUMP_LAYOUT_LEVEL)) {
return;
}
NS_ASSERTION(aPO, "Pointer is null!");
NS_ASSERTION(aDC, "Pointer is null!");
const char types[][3] = {"DC", "FR", "IF", "FS"};
FILE* fd = nullptr;
if (aLevel == 0) {
fd = fopen("tree_layout.txt", "w");
fprintf(fd,
"DocTree\n***************************************************\n");
fprintf(fd, "***************************************************\n");
fprintf(fd, "T PO DocShell Seq Page Page# Rect\n");
} else {
fd = aFD;
}
if (fd) {
nsIFrame* rootFrame = nullptr;
if (aPO->mPresShell) {
rootFrame = aPO->mPresShell->GetRootFrame();
}
for (int32_t k = 0; k < aLevel; k++) fprintf(fd, " ");
fprintf(fd, "%s %p %p\n", types[aPO->mFrameType], aPO.get(),
aPO->mDocShell.get());
if (aPO->PrintingIsEnabled()) {
nsAutoCString docStr;
nsAutoCString urlStr;
GetDocTitleAndURL(aPO, docStr, urlStr);
DumpLayoutData(docStr.get(), urlStr.get(), aPO->mPresContext, aDC,
rootFrame, aPO->mDocShell, fd);
}
fprintf(fd, "<***************************************************>\n");
for (const auto& po : aPO->mKids) {
NS_ASSERTION(po, "nsPrintObject can't be null!");
DumpPrintObjectsTreeLayout(po, aDC, aLevel + 1, fd);
}
}
if (aLevel == 0 && fd) {
fclose(fd);
}
}
//-------------------------------------------------------------
static void DumpPrintObjectsListStart(
const char* aStr, const nsTArray<nsPrintObject*>& aDocList) {
if (!MOZ_LOG_TEST(gPrintingLog, DUMP_LAYOUT_LEVEL)) {
return;
}
NS_ASSERTION(aStr, "Pointer is null!");
PR_PL(("%s\n", aStr));
DumpPrintObjectsList(aDocList);
}
#endif
//---------------------------------------------------------------
//---------------------------------------------------------------
//-- End of debug helper routines
//---------------------------------------------------------------
Ссылка в новой задаче Показать git blame Копировать постоянную ссылку