mozilla
/
gecko-dev
зеркало из https://github.com/mozilla/gecko-dev.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
gecko-dev/content/smil/nsSMILTimedElement.cpp

1697 строки
53 KiB
C++
Исходник Ответственный История

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is the Mozilla SMIL module.
*
* The Initial Developer of the Original Code is Brian Birtles.
* Portions created by the Initial Developer are Copyright (C) 2006
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
* Brian Birtles <birtles@gmail.com>
*
* Alternatively, the contents of this file may be used under the terms of
* either of the GNU General Public License Version 2 or later (the "GPL"),
* or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
#include "nsSMILTimedElement.h"
#include "nsSMILAnimationFunction.h"
#include "nsSMILTimeValue.h"
#include "nsSMILTimeValueSpec.h"
#include "nsSMILInstanceTime.h"
#include "nsSMILParserUtils.h"
#include "nsSMILTimeContainer.h"
#include "nsGkAtoms.h"
#include "nsReadableUtils.h"
#include "nsMathUtils.h"
#include "prdtoa.h"
#include "plstr.h"
#include "prtime.h"
#include "nsString.h"
//----------------------------------------------------------------------
// Helper classes -- InstanceTimeComparator
// Upon inserting an instance time into one of our instance time lists we assign
// it a serial number. This allows us to sort the instance times in such a way
// that where we have several equal instance times, the ones added later will
// sort later. This means that when we call UpdateCurrentInterval during the
// waiting state we won't unnecessarily change the begin instance.
//
// The serial number also means that every instance time has an unambiguous
// position in the array so we can use RemoveElementSorted and the like.
PRBool
nsSMILTimedElement::InstanceTimeComparator::Equals(
const nsSMILInstanceTime* aElem1,
const nsSMILInstanceTime* aElem2) const
{
NS_ABORT_IF_FALSE(aElem1 && aElem2,
"Trying to compare null instance time pointers");
NS_ABORT_IF_FALSE(aElem1->Serial() && aElem2->Serial(),
"Instance times have not been assigned serial numbers");
NS_ABORT_IF_FALSE(aElem1 == aElem2 || aElem1->Serial() != aElem2->Serial(),
"Serial numbers are not unique");
return aElem1->Serial() == aElem2->Serial();
}
PRBool
nsSMILTimedElement::InstanceTimeComparator::LessThan(
const nsSMILInstanceTime* aElem1,
const nsSMILInstanceTime* aElem2) const
{
NS_ABORT_IF_FALSE(aElem1 && aElem2,
"Trying to compare null instance time pointers");
NS_ABORT_IF_FALSE(aElem1->Serial() && aElem2->Serial(),
"Instance times have not been assigned serial numbers");
PRInt8 cmp = aElem1->Time().CompareTo(aElem2->Time());
return cmp == 0 ? aElem1->Serial() < aElem2->Serial() : cmp < 0;
}
//----------------------------------------------------------------------
// Static members
nsAttrValue::EnumTable nsSMILTimedElement::sFillModeTable[] = {
{"remove", FILL_REMOVE},
{"freeze", FILL_FREEZE},
{nsnull, 0}
};
nsAttrValue::EnumTable nsSMILTimedElement::sRestartModeTable[] = {
{"always", RESTART_ALWAYS},
{"whenNotActive", RESTART_WHENNOTACTIVE},
{"never", RESTART_NEVER},
{nsnull, 0}
};
const nsSMILMilestone nsSMILTimedElement::sMaxMilestone(LL_MAXINT, PR_FALSE);
//----------------------------------------------------------------------
// Ctor, dtor
nsSMILTimedElement::nsSMILTimedElement()
:
mAnimationElement(nsnull),
mFillMode(FILL_REMOVE),
mRestartMode(RESTART_ALWAYS),
mBeginSpecSet(PR_FALSE),
mEndHasEventConditions(PR_FALSE),
mInstanceSerialIndex(0),
mClient(nsnull),
mCurrentInterval(nsnull),
mPrevRegisteredMilestone(sMaxMilestone),
mElementState(STATE_STARTUP)
{
mSimpleDur.SetIndefinite();
mMin.SetMillis(0L);
mMax.SetIndefinite();
mTimeDependents.Init();
}
nsSMILTimedElement::~nsSMILTimedElement()
{
// Put us in a consistent state in case we get any callbacks
mElementState = STATE_POSTACTIVE;
// Unlink all instance times from dependent intervals
for (PRUint32 i = 0; i < mBeginInstances.Length(); ++i) {
mBeginInstances[i]->Unlink();
}
mBeginInstances.Clear();
for (PRUint32 i = 0; i < mEndInstances.Length(); ++i) {
mEndInstances[i]->Unlink();
}
mEndInstances.Clear();
// Notify anyone listening to our intervals that they're gone
// (We shouldn't get any callbacks from this because all our instance times
// are now disassociated with any intervals)
if (mCurrentInterval) {
mCurrentInterval->NotifyDeleting();
mCurrentInterval = nsnull;
}
for (PRInt32 i = mOldIntervals.Length() - 1; i >= 0; --i) {
mOldIntervals[i]->NotifyDeleting();
}
mOldIntervals.Clear();
}
void
nsSMILTimedElement::SetAnimationElement(nsISMILAnimationElement* aElement)
{
NS_ABORT_IF_FALSE(aElement, "NULL owner element");
NS_ABORT_IF_FALSE(!mAnimationElement, "Re-setting owner");
mAnimationElement = aElement;
}
nsSMILTimeContainer*
nsSMILTimedElement::GetTimeContainer()
{
return mAnimationElement ? mAnimationElement->GetTimeContainer() : nsnull;
}
//----------------------------------------------------------------------
// nsIDOMElementTimeControl methods
//
// The definition of the ElementTimeControl interface differs between SMIL
// Animation and SVG 1.1. In SMIL Animation all methods have a void return
// type and the new instance time is simply added to the list and restart
// semantics are applied as with any other instance time. In the SVG definition
// the methods return a bool depending on the restart mode.
//
// This inconsistency has now been addressed by an erratum in SVG 1.1:
//
// http://www.w3.org/2003/01/REC-SVG11-20030114-errata#elementtimecontrol-interface
//
// which favours the definition in SMIL, i.e. instance times are just added
// without first checking the restart mode.
nsresult
nsSMILTimedElement::BeginElementAt(double aOffsetSeconds)
{
nsSMILTimeContainer* container = GetTimeContainer();
if (!container)
return NS_ERROR_FAILURE;
nsSMILTime currentTime = container->GetCurrentTime();
AddInstanceTimeFromCurrentTime(currentTime, aOffsetSeconds, PR_TRUE);
// After we've added the instance time we must do a local resample.
//
// The reason for this can be explained by considering the following sequence
// of calls in a script block
//
// BeginElementAt(0)
// BeginElementAt(-1)
// GetStartTime() <-- should return the time from the first call to
// BeginElementAt
//
// After BeginElementAt(0) is called a new begin instance time is added to the
// list. Depending on the restart mode this may generate a new interval,
// possiblying ending the current interval early.
//
// Intuitively this change should take effect before the subsequent call to
// BeginElementAt however to get this to take effect we need to drive the
// state engine through its sequence active-waiting-active by calling Sample.
//
// When we get the second call to BeginElementAt the element should be in the
// active state and hence the new begin instance time will be ignored because
// it is before the beginning of the (new) current interval. SMIL says we do
// not change the begin of a current interval once it is active.
//
// See also:
// http://www.w3.org/TR/SMIL3/smil-timing.html#Timing-BeginEnd-Restart
// If we haven't started yet, then there's no point in trying to force the
// sample. A series of calls to BeginElementAt before the document starts
// should probably just add a series of instance times.
if (mElementState != STATE_STARTUP) {
DoSampleAt(currentTime, PR_FALSE); // Regular sample, not end sample
}
return NS_OK;
}
nsresult
nsSMILTimedElement::EndElementAt(double aOffsetSeconds)
{
nsSMILTimeContainer* container = GetTimeContainer();
if (!container)
return NS_ERROR_FAILURE;
nsSMILTime currentTime = container->GetCurrentTime();
AddInstanceTimeFromCurrentTime(currentTime, aOffsetSeconds, PR_FALSE);
if (mElementState != STATE_STARTUP) {
DoSampleAt(currentTime, PR_FALSE); // Regular sample, not end sample
}
return NS_OK;
}
//----------------------------------------------------------------------
// nsSVGAnimationElement methods
nsSMILTimeValue
nsSMILTimedElement::GetStartTime() const
{
return mElementState == STATE_WAITING || mElementState == STATE_ACTIVE
? mCurrentInterval->Begin()->Time()
: nsSMILTimeValue();
}
//----------------------------------------------------------------------
// nsSMILTimedElement
void
nsSMILTimedElement::AddInstanceTime(nsSMILInstanceTime* aInstanceTime,
PRBool aIsBegin)
{
NS_ABORT_IF_FALSE(aInstanceTime, "Attempting to add null instance time");
aInstanceTime->SetSerial(++mInstanceSerialIndex);
InstanceTimeList& instanceList = aIsBegin ? mBeginInstances : mEndInstances;
nsRefPtr<nsSMILInstanceTime>* inserted =
instanceList.InsertElementSorted(aInstanceTime, InstanceTimeComparator());
if (!inserted) {
NS_WARNING("Insufficient memory to insert instance time");
return;
}
UpdateCurrentInterval();
}
void
nsSMILTimedElement::UpdateInstanceTime(nsSMILInstanceTime* aInstanceTime,
nsSMILTimeValue& aUpdatedTime,
PRBool aIsBegin)
{
NS_ABORT_IF_FALSE(aInstanceTime, "Attempting to update null instance time");
// The reason we update the time here and not in the nsSMILTimeValueSpec is
// that it means we *could* re-sort more efficiently by doing a sorted remove
// and insert but currently this doesn't seem to be necessary given how
// infrequently we get these change notices.
aInstanceTime->DependentUpdate(aUpdatedTime);
InstanceTimeList& instanceList = aIsBegin ? mBeginInstances : mEndInstances;
instanceList.Sort(InstanceTimeComparator());
// Generally speaking, UpdateCurrentInterval makes changes to the current
// interval and sends changes notices itself. However, in this case because
// instance times are shared between the instance time list and the intervals
// we are effectively changing the current interval outside
// UpdateCurrentInterval so we need to explicitly signal that we've made
// a change.
//
// This wouldn't be necessary if we cloned instance times on adding them to
// the current interval but this introduces other complications (particularly
// detecting which instance time is being used to define the begin of the
// current interval when doing a Reset).
PRBool changedCurrentInterval = mCurrentInterval &&
(mCurrentInterval->Begin() == aInstanceTime ||
mCurrentInterval->End() == aInstanceTime);
UpdateCurrentInterval(changedCurrentInterval);
}
void
nsSMILTimedElement::RemoveInstanceTime(nsSMILInstanceTime* aInstanceTime,
PRBool aIsBegin)
{
NS_ABORT_IF_FALSE(aInstanceTime, "Attempting to remove null instance time");
InstanceTimeList& instanceList = aIsBegin ? mBeginInstances : mEndInstances;
#ifdef DEBUG
PRBool found =
#endif
instanceList.RemoveElementSorted(aInstanceTime, InstanceTimeComparator());
NS_ABORT_IF_FALSE(found, "Couldn't find instance time to delete");
UpdateCurrentInterval();
}
void
nsSMILTimedElement::RemoveInstanceTimesForCreator(
const nsSMILTimeValueSpec* aCreator, PRBool aIsBegin)
{
NS_ABORT_IF_FALSE(aCreator, "Creator not set");
InstanceTimeList& instances = aIsBegin ? mBeginInstances : mEndInstances;
PRInt32 count = instances.Length();
for (PRInt32 i = count - 1; i >= 0; --i) {
nsSMILInstanceTime* instance = instances[i].get();
NS_ABORT_IF_FALSE(instance, "NULL instance in instances array");
if (instance->GetCreator() == aCreator) {
instance->Unlink();
instances.RemoveElementAt(i);
}
}
UpdateCurrentInterval();
}
void
nsSMILTimedElement::SetTimeClient(nsSMILAnimationFunction* aClient)
{
//
// No need to check for NULL. A NULL parameter simply means to remove the
// previous client which we do by setting to NULL anyway.
//
mClient = aClient;
}
void
nsSMILTimedElement::SampleAt(nsSMILTime aContainerTime)
{
// Milestones are cleared before a sample
mPrevRegisteredMilestone = sMaxMilestone;
DoSampleAt(aContainerTime, PR_FALSE);
}
void
nsSMILTimedElement::SampleEndAt(nsSMILTime aContainerTime)
{
// Milestones are cleared before a sample
mPrevRegisteredMilestone = sMaxMilestone;
// If the current interval changes, we don't bother trying to remove any old
// milestones we'd registered. So it's possible to get a call here to end an
// interval at a time that no longer reflects the end of the current interval.
//
// For now we just check that we're actually in an interval but note that the
// initial sample we use to initialise the model is an end sample. This is
// because we want to resolve all the instance times before committing to an
// initial interval. Therefore an end sample from the startup state is also
// acceptable.
if (mElementState == STATE_ACTIVE || mElementState == STATE_STARTUP) {
DoSampleAt(aContainerTime, PR_TRUE); // End sample
} else {
// Even if this was an unnecessary milestone sample we want to be sure that
// our next real milestone is registered.
RegisterMilestone();
}
}
void
nsSMILTimedElement::DoSampleAt(nsSMILTime aContainerTime, PRBool aEndOnly)
{
NS_ABORT_IF_FALSE(mAnimationElement,
"Got sample before being registered with an animation element");
NS_ABORT_IF_FALSE(GetTimeContainer(),
"Got sample without being registered with a time container");
// This could probably happen if we later implement externalResourcesRequired
// (bug 277955) and whilst waiting for those resources (and the animation to
// start) we transfer a node from another document fragment that has already
// started. In such a case we might receive milestone samples registered with
// the already active container.
if (GetTimeContainer()->IsPausedByType(nsSMILTimeContainer::PAUSE_BEGIN))
return;
NS_ABORT_IF_FALSE(mElementState != STATE_STARTUP || aEndOnly,
"Got a regular sample during startup state, expected an end sample"
" instead");
PRBool stateChanged;
nsSMILTimeValue sampleTime(aContainerTime);
do {
#ifdef DEBUG
// Check invariant
if (mElementState == STATE_STARTUP || mElementState == STATE_POSTACTIVE) {
NS_ABORT_IF_FALSE(!mCurrentInterval,
"Shouldn't have current interval in startup or postactive states");
} else {
NS_ABORT_IF_FALSE(mCurrentInterval,
"Should have current interval in waiting and active states");
}
#endif
stateChanged = PR_FALSE;
switch (mElementState)
{
case STATE_STARTUP:
{
nsSMILInterval firstInterval;
mElementState =
NS_SUCCEEDED(GetNextInterval(nsnull, nsnull, firstInterval))
? STATE_WAITING
: STATE_POSTACTIVE;
stateChanged = PR_TRUE;
if (mElementState == STATE_WAITING) {
mCurrentInterval = new nsSMILInterval(firstInterval);
if (!mCurrentInterval) {
NS_WARNING("Failed to allocate memory for new interval");
mElementState = STATE_POSTACTIVE;
} else {
NotifyNewInterval();
}
}
}
break;
case STATE_WAITING:
{
if (mCurrentInterval->Begin()->Time() <= sampleTime) {
mElementState = STATE_ACTIVE;
mCurrentInterval->FreezeBegin();
if (HasPlayed()) {
Reset(); // Apply restart behaviour
}
if (mClient) {
mClient->Activate(mCurrentInterval->Begin()->Time().GetMillis());
}
if (HasPlayed()) {
// The call to Reset() may mean that the end point of our current
// interval should be changed and so we should update the interval
// now. However, calling UpdateCurrentInterval could result in the
// interval getting deleted (perhaps through some web of syncbase
// dependencies) therefore we make updating the interval the last
// thing we do. There is no guarantee that mCurrentInterval.IsSet()
// is true after this.
UpdateCurrentInterval();
}
stateChanged = PR_TRUE;
}
}
break;
case STATE_ACTIVE:
{
// Only apply an early end if we're not already ending.
if (mCurrentInterval->End()->Time() > sampleTime) {
nsSMILInstanceTime* earlyEnd = CheckForEarlyEnd(sampleTime);
if (earlyEnd) {
mCurrentInterval->SetEnd(*earlyEnd);
NotifyChangedInterval();
}
}
if (mCurrentInterval->End()->Time() <= sampleTime) {
nsSMILInterval newInterval;
mElementState =
NS_SUCCEEDED(GetNextInterval(mCurrentInterval, nsnull, newInterval))
? STATE_WAITING
: STATE_POSTACTIVE;
if (mClient) {
mClient->Inactivate(mFillMode == FILL_FREEZE);
}
mCurrentInterval->FreezeEnd();
mOldIntervals.AppendElement(mCurrentInterval.forget());
// We must update mOldIntervals before calling SampleFillValue
SampleFillValue();
if (mElementState == STATE_WAITING) {
mCurrentInterval = new nsSMILInterval(newInterval);
if (!mCurrentInterval) {
NS_WARNING("Failed to allocate memory for new interval");
mElementState = STATE_POSTACTIVE;
} else {
NotifyNewInterval();
}
}
stateChanged = PR_TRUE;
} else {
nsSMILTime beginTime = mCurrentInterval->Begin()->Time().GetMillis();
nsSMILTime activeTime = aContainerTime - beginTime;
SampleSimpleTime(activeTime);
}
}
break;
case STATE_POSTACTIVE:
break;
}
// Generally we continue driving the state machine so long as we have changed
// state. However, for end samples we only drive the state machine as far as
// the waiting or postactive state because we don't want to commit to any new
// interval (by transitioning to the active state) until all the end samples
// have finished and we then have complete information about the available
// instance times upon which to base our next interval.
} while (stateChanged && (!aEndOnly || (mElementState != STATE_WAITING &&
mElementState != STATE_POSTACTIVE)));
RegisterMilestone();
}
void
nsSMILTimedElement::HandleContainerTimeChange()
{
// In future we could possibly introduce a separate change notice for time
// container changes and only notify those dependents who live in other time
// containers. For now we don't bother because when we re-resolve the time in
// the nsSMILTimeValueSpec we'll check if anything has changed and if not, we
// won't go any further.
if (mElementState == STATE_WAITING || mElementState == STATE_ACTIVE) {
NotifyChangedInterval();
}
}
void
nsSMILTimedElement::Reset()
{
// SMIL 3.0 section 5.4.3, 'Resetting element state':
// Any instance times associated with past Event-values, Repeat-values,
// Accesskey-values or added via DOM method calls are removed from the
// dependent begin and end instance times lists. In effect, all events and
// DOM methods calls in the past are cleared. This does not apply to an
// instance time that defines the begin of the current interval.
PRInt32 count = mBeginInstances.Length();
for (PRInt32 i = count - 1; i >= 0; --i) {
nsSMILInstanceTime* instance = mBeginInstances[i].get();
NS_ABORT_IF_FALSE(instance, "NULL instance in begin instances array");
if (instance->ClearOnReset() &&
(!mCurrentInterval || instance != mCurrentInterval->Begin())) {
instance->Unlink();
mBeginInstances.RemoveElementAt(i);
}
}
count = mEndInstances.Length();
for (PRInt32 j = count - 1; j >= 0; --j) {
nsSMILInstanceTime* instance = mEndInstances[j].get();
NS_ABORT_IF_FALSE(instance, "NULL instance in end instances array");
if (instance->ClearOnReset()) {
instance->Unlink();
mEndInstances.RemoveElementAt(j);
}
}
}
PRBool
nsSMILTimedElement::SetAttr(nsIAtom* aAttribute, const nsAString& aValue,
nsAttrValue& aResult, nsIContent* aContextNode,
nsresult* aParseResult)
{
PRBool foundMatch = PR_TRUE;
nsresult parseResult = NS_OK;
if (aAttribute == nsGkAtoms::begin) {
parseResult = SetBeginSpec(aValue, aContextNode);
} else if (aAttribute == nsGkAtoms::dur) {
parseResult = SetSimpleDuration(aValue);
} else if (aAttribute == nsGkAtoms::end) {
parseResult = SetEndSpec(aValue, aContextNode);
} else if (aAttribute == nsGkAtoms::fill) {
parseResult = SetFillMode(aValue);
} else if (aAttribute == nsGkAtoms::max) {
parseResult = SetMax(aValue);
} else if (aAttribute == nsGkAtoms::min) {
parseResult = SetMin(aValue);
} else if (aAttribute == nsGkAtoms::repeatCount) {
parseResult = SetRepeatCount(aValue);
} else if (aAttribute == nsGkAtoms::repeatDur) {
parseResult = SetRepeatDur(aValue);
} else if (aAttribute == nsGkAtoms::restart) {
parseResult = SetRestart(aValue);
} else {
foundMatch = PR_FALSE;
}
if (foundMatch) {
aResult.SetTo(aValue);
if (aParseResult) {
*aParseResult = parseResult;
}
}
return foundMatch;
}
PRBool
nsSMILTimedElement::UnsetAttr(nsIAtom* aAttribute)
{
PRBool foundMatch = PR_TRUE;
if (aAttribute == nsGkAtoms::begin) {
UnsetBeginSpec();
} else if (aAttribute == nsGkAtoms::dur) {
UnsetSimpleDuration();
} else if (aAttribute == nsGkAtoms::end) {
UnsetEndSpec();
} else if (aAttribute == nsGkAtoms::fill) {
UnsetFillMode();
} else if (aAttribute == nsGkAtoms::max) {
UnsetMax();
} else if (aAttribute == nsGkAtoms::min) {
UnsetMin();
} else if (aAttribute == nsGkAtoms::repeatCount) {
UnsetRepeatCount();
} else if (aAttribute == nsGkAtoms::repeatDur) {
UnsetRepeatDur();
} else if (aAttribute == nsGkAtoms::restart) {
UnsetRestart();
} else {
foundMatch = PR_FALSE;
}
return foundMatch;
}
//----------------------------------------------------------------------
// Setters and unsetters
nsresult
nsSMILTimedElement::SetBeginSpec(const nsAString& aBeginSpec,
nsIContent* aContextNode)
{
mBeginSpecSet = PR_TRUE;
return SetBeginOrEndSpec(aBeginSpec, aContextNode, PR_TRUE);
}
void
nsSMILTimedElement::UnsetBeginSpec()
{
ClearBeginOrEndSpecs(PR_TRUE);
mBeginSpecSet = PR_FALSE;
UpdateCurrentInterval();
}
nsresult
nsSMILTimedElement::SetEndSpec(const nsAString& aEndSpec,
nsIContent* aContextNode)
{
// XXX When implementing events etc., don't forget to ensure
// mEndHasEventConditions is set if the specification contains conditions that
// describe event-values, repeat-values or accessKey-values.
return SetBeginOrEndSpec(aEndSpec, aContextNode, PR_FALSE);
}
void
nsSMILTimedElement::UnsetEndSpec()
{
ClearBeginOrEndSpecs(PR_FALSE);
UpdateCurrentInterval();
}
nsresult
nsSMILTimedElement::SetSimpleDuration(const nsAString& aDurSpec)
{
nsSMILTimeValue duration;
PRBool isMedia;
nsresult rv;
rv = nsSMILParserUtils::ParseClockValue(aDurSpec, &duration,
nsSMILParserUtils::kClockValueAllowIndefinite, &isMedia);
if (NS_FAILED(rv)) {
mSimpleDur.SetIndefinite();
return NS_ERROR_FAILURE;
}
if (duration.IsResolved() && duration.GetMillis() == 0L) {
mSimpleDur.SetIndefinite();
return NS_ERROR_FAILURE;
}
//
// SVG-specific: "For SVG's animation elements, if "media" is specified, the
// attribute will be ignored." (SVG 1.1, section 19.2.6)
//
if (isMedia)
duration.SetIndefinite();
// mSimpleDur should never be unresolved. ParseClockValue will either set
// duration to resolved/indefinite/media or will return a failure code.
NS_ASSERTION(duration.IsResolved() || duration.IsIndefinite(),
"Setting unresolved simple duration");
mSimpleDur = duration;
UpdateCurrentInterval();
return NS_OK;
}
void
nsSMILTimedElement::UnsetSimpleDuration()
{
mSimpleDur.SetIndefinite();
UpdateCurrentInterval();
}
nsresult
nsSMILTimedElement::SetMin(const nsAString& aMinSpec)
{
nsSMILTimeValue duration;
PRBool isMedia;
nsresult rv;
rv = nsSMILParserUtils::ParseClockValue(aMinSpec, &duration, 0, &isMedia);
if (isMedia) {
duration.SetMillis(0L);
}
if (NS_FAILED(rv) || !duration.IsResolved()) {
mMin.SetMillis(0L);
return NS_ERROR_FAILURE;
}
if (duration.GetMillis() < 0L) {
mMin.SetMillis(0L);
return NS_ERROR_FAILURE;
}
mMin = duration;
UpdateCurrentInterval();
return NS_OK;
}
void
nsSMILTimedElement::UnsetMin()
{
mMin.SetMillis(0L);
UpdateCurrentInterval();
}
nsresult
nsSMILTimedElement::SetMax(const nsAString& aMaxSpec)
{
nsSMILTimeValue duration;
PRBool isMedia;
nsresult rv;
rv = nsSMILParserUtils::ParseClockValue(aMaxSpec, &duration,
nsSMILParserUtils::kClockValueAllowIndefinite, &isMedia);
if (isMedia)
duration.SetIndefinite();
if (NS_FAILED(rv) || (!duration.IsResolved() && !duration.IsIndefinite())) {
mMax.SetIndefinite();
return NS_ERROR_FAILURE;
}
if (duration.IsResolved() && duration.GetMillis() <= 0L) {
mMax.SetIndefinite();
return NS_ERROR_FAILURE;
}
mMax = duration;
UpdateCurrentInterval();
return NS_OK;
}
void
nsSMILTimedElement::UnsetMax()
{
mMax.SetIndefinite();
UpdateCurrentInterval();
}
nsresult
nsSMILTimedElement::SetRestart(const nsAString& aRestartSpec)
{
nsAttrValue temp;
PRBool parseResult
= temp.ParseEnumValue(aRestartSpec, sRestartModeTable, PR_TRUE);
mRestartMode = parseResult
? nsSMILRestartMode(temp.GetEnumValue())
: RESTART_ALWAYS;
UpdateCurrentInterval();
return parseResult ? NS_OK : NS_ERROR_FAILURE;
}
void
nsSMILTimedElement::UnsetRestart()
{
mRestartMode = RESTART_ALWAYS;
UpdateCurrentInterval();
}
nsresult
nsSMILTimedElement::SetRepeatCount(const nsAString& aRepeatCountSpec)
{
nsSMILRepeatCount newRepeatCount;
nsresult rv =
nsSMILParserUtils::ParseRepeatCount(aRepeatCountSpec, newRepeatCount);
if (NS_SUCCEEDED(rv)) {
mRepeatCount = newRepeatCount;
} else {
mRepeatCount.Unset();
}
UpdateCurrentInterval();
return rv;
}
void
nsSMILTimedElement::UnsetRepeatCount()
{
mRepeatCount.Unset();
UpdateCurrentInterval();
}
nsresult
nsSMILTimedElement::SetRepeatDur(const nsAString& aRepeatDurSpec)
{
nsresult rv;
nsSMILTimeValue duration;
rv = nsSMILParserUtils::ParseClockValue(aRepeatDurSpec, &duration,
nsSMILParserUtils::kClockValueAllowIndefinite);
if (NS_FAILED(rv) || (!duration.IsResolved() && !duration.IsIndefinite())) {
mRepeatDur.SetUnresolved();
return NS_ERROR_FAILURE;
}
mRepeatDur = duration;
UpdateCurrentInterval();
return NS_OK;
}
void
nsSMILTimedElement::UnsetRepeatDur()
{
mRepeatDur.SetUnresolved();
UpdateCurrentInterval();
}
nsresult
nsSMILTimedElement::SetFillMode(const nsAString& aFillModeSpec)
{
PRUint16 previousFillMode = mFillMode;
nsAttrValue temp;
PRBool parseResult =
temp.ParseEnumValue(aFillModeSpec, sFillModeTable, PR_TRUE);
mFillMode = parseResult
? nsSMILFillMode(temp.GetEnumValue())
: FILL_REMOVE;
// Check if we're in a fill-able state: i.e. we've played at least one
// interval and are now between intervals or at the end of all intervals
PRBool isFillable = HasPlayed() &&
(mElementState == STATE_WAITING || mElementState == STATE_POSTACTIVE);
if (mClient && mFillMode != previousFillMode && isFillable) {
mClient->Inactivate(mFillMode == FILL_FREEZE);
SampleFillValue();
}
return parseResult ? NS_OK : NS_ERROR_FAILURE;
}
void
nsSMILTimedElement::UnsetFillMode()
{
PRUint16 previousFillMode = mFillMode;
mFillMode = FILL_REMOVE;
if ((mElementState == STATE_WAITING || mElementState == STATE_POSTACTIVE) &&
previousFillMode == FILL_FREEZE && mClient && HasPlayed())
mClient->Inactivate(PR_FALSE);
}
void
nsSMILTimedElement::AddDependent(nsSMILTimeValueSpec& aDependent)
{
// There's probably no harm in attempting to register a dependent
// nsSMILTimeValueSpec twice, but we're not expecting it to happen.
NS_ABORT_IF_FALSE(!mTimeDependents.GetEntry(&aDependent),
"nsSMILTimeValueSpec is already registered as a dependency");
mTimeDependents.PutEntry(&aDependent);
// Add old and current intervals
//
// It's not necessary to call SyncPauseTime since we're dealing with
// historical instance times not newly added ones.
nsSMILTimeContainer* container = GetTimeContainer();
for (PRUint32 i = 0; i < mOldIntervals.Length(); ++i) {
aDependent.HandleNewInterval(*mOldIntervals[i], container);
}
if (mCurrentInterval) {
aDependent.HandleNewInterval(*mCurrentInterval, container);
}
}
void
nsSMILTimedElement::RemoveDependent(nsSMILTimeValueSpec& aDependent)
{
mTimeDependents.RemoveEntry(&aDependent);
}
PRBool
nsSMILTimedElement::IsTimeDependent(const nsSMILTimedElement& aOther) const
{
const nsSMILInstanceTime* thisBegin = GetEffectiveBeginInstance();
const nsSMILInstanceTime* otherBegin = aOther.GetEffectiveBeginInstance();
if (!thisBegin || !otherBegin)
return PR_FALSE;
return thisBegin->IsDependent(*otherBegin);
}
void
nsSMILTimedElement::BindToTree(nsIContent* aContextNode)
{
// Resolve references to other parts of the tree
PRUint32 count = mBeginSpecs.Length();
for (PRUint32 i = 0; i < count; ++i) {
nsSMILTimeValueSpec* beginSpec = mBeginSpecs[i];
NS_ABORT_IF_FALSE(beginSpec,
"null nsSMILTimeValueSpec in list of begin specs");
beginSpec->ResolveReferences(aContextNode);
}
count = mEndSpecs.Length();
for (PRUint32 j = 0; j < count; ++j) {
nsSMILTimeValueSpec* endSpec = mEndSpecs[j];
NS_ABORT_IF_FALSE(endSpec, "null nsSMILTimeValueSpec in list of end specs");
endSpec->ResolveReferences(aContextNode);
}
// Clear any previous milestone since it might be been processed whilst we
// were not bound to the tree.
mPrevRegisteredMilestone = sMaxMilestone;
RegisterMilestone();
}
void
nsSMILTimedElement::Traverse(nsCycleCollectionTraversalCallback* aCallback)
{
PRUint32 count = mBeginSpecs.Length();
for (PRUint32 i = 0; i < count; ++i) {
nsSMILTimeValueSpec* beginSpec = mBeginSpecs[i];
NS_ABORT_IF_FALSE(beginSpec,
"null nsSMILTimeValueSpec in list of begin specs");
beginSpec->Traverse(aCallback);
}
count = mEndSpecs.Length();
for (PRUint32 j = 0; j < count; ++j) {
nsSMILTimeValueSpec* endSpec = mEndSpecs[j];
NS_ABORT_IF_FALSE(endSpec, "null nsSMILTimeValueSpec in list of end specs");
endSpec->Traverse(aCallback);
}
}
void
nsSMILTimedElement::Unlink()
{
PRUint32 count = mBeginSpecs.Length();
for (PRUint32 i = 0; i < count; ++i) {
nsSMILTimeValueSpec* beginSpec = mBeginSpecs[i];
NS_ABORT_IF_FALSE(beginSpec,
"null nsSMILTimeValueSpec in list of begin specs");
beginSpec->Unlink();
}
count = mEndSpecs.Length();
for (PRUint32 j = 0; j < count; ++j) {
nsSMILTimeValueSpec* endSpec = mEndSpecs[j];
NS_ABORT_IF_FALSE(endSpec, "null nsSMILTimeValueSpec in list of end specs");
endSpec->Unlink();
}
}
//----------------------------------------------------------------------
// Implementation helpers
nsresult
nsSMILTimedElement::SetBeginOrEndSpec(const nsAString& aSpec,
nsIContent* aContextNode,
PRBool aIsBegin)
{
ClearBeginOrEndSpecs(aIsBegin);
PRInt32 start;
PRInt32 end = -1;
PRInt32 length;
nsresult rv = NS_OK;
TimeValueSpecList& timeSpecsList = aIsBegin ? mBeginSpecs : mEndSpecs;
do {
start = end + 1;
end = aSpec.FindChar(';', start);
length = (end == -1) ? -1 : end - start;
nsAutoPtr<nsSMILTimeValueSpec>
spec(new nsSMILTimeValueSpec(*this, aIsBegin));
rv = spec->SetSpec(Substring(aSpec, start, length), aContextNode);
if (NS_SUCCEEDED(rv)) {
timeSpecsList.AppendElement(spec.forget());
}
} while (end != -1 && NS_SUCCEEDED(rv));
if (NS_FAILED(rv)) {
ClearBeginOrEndSpecs(aIsBegin);
}
UpdateCurrentInterval();
return rv;
}
void
nsSMILTimedElement::ClearBeginOrEndSpecs(PRBool aIsBegin)
{
TimeValueSpecList& specs = aIsBegin ? mBeginSpecs : mEndSpecs;
specs.Clear();
// Remove only those instance times generated by the attribute, not those from
// DOM calls.
InstanceTimeList& instances = aIsBegin ? mBeginInstances : mEndInstances;
PRInt32 count = instances.Length();
for (PRInt32 i = count - 1; i >= 0; --i) {
nsSMILInstanceTime* instance = instances[i].get();
NS_ABORT_IF_FALSE(instance, "NULL instance in instances array");
if (!instance->FromDOM()) {
instance->Unlink();
instances.RemoveElementAt(i);
}
}
}
//
// This method is based on the pseudocode given in the SMILANIM spec.
//
// See:
// http://www.w3.org/TR/2001/REC-smil-animation-20010904/#Timing-BeginEnd-LC-Start
//
nsresult
nsSMILTimedElement::GetNextInterval(const nsSMILInterval* aPrevInterval,
const nsSMILInstanceTime* aFixedBeginTime,
nsSMILInterval& aResult) const
{
NS_ABORT_IF_FALSE(!aFixedBeginTime || aFixedBeginTime->Time().IsResolved(),
"Unresolved begin time specified for interval start");
static nsSMILTimeValue zeroTime(0L);
if (mRestartMode == RESTART_NEVER && aPrevInterval)
return NS_ERROR_FAILURE;
// Calc starting point
nsSMILTimeValue beginAfter;
PRBool prevIntervalWasZeroDur = PR_FALSE;
if (aPrevInterval) {
beginAfter = aPrevInterval->End()->Time();
prevIntervalWasZeroDur
= aPrevInterval->End()->Time() == aPrevInterval->Begin()->Time();
if (aFixedBeginTime) {
prevIntervalWasZeroDur &=
aPrevInterval->Begin()->Time() == aFixedBeginTime->Time();
}
} else {
beginAfter.SetMillis(LL_MININT);
}
nsRefPtr<nsSMILInstanceTime> tempBegin;
nsRefPtr<nsSMILInstanceTime> tempEnd;
while (PR_TRUE) {
// Calculate begin time
if (aFixedBeginTime) {
if (aFixedBeginTime->Time() < beginAfter)
return NS_ERROR_FAILURE;
// our ref-counting is not const-correct
tempBegin = const_cast<nsSMILInstanceTime*>(aFixedBeginTime);
} else if (!mBeginSpecSet && beginAfter <= zeroTime) {
tempBegin = new nsSMILInstanceTime(nsSMILTimeValue(0));
if (!tempBegin)
return NS_ERROR_OUT_OF_MEMORY;
} else {
PRInt32 beginPos = 0;
tempBegin = GetNextGreaterOrEqual(mBeginInstances, beginAfter, beginPos);
if (!tempBegin || !tempBegin->Time().IsResolved())
return NS_ERROR_FAILURE;
}
NS_ABORT_IF_FALSE(tempBegin && tempBegin->Time().IsResolved() &&
tempBegin->Time() >= beginAfter,
"Got a bad begin time while fetching next interval");
// Calculate end time
{
PRInt32 endPos = 0;
tempEnd = GetNextGreaterOrEqual(mEndInstances, tempBegin->Time(), endPos);
// If the last interval ended at the same point and was zero-duration and
// this one is too, look for another end to use instead
if (tempEnd && tempEnd->Time() == tempBegin->Time() &&
prevIntervalWasZeroDur) {
tempEnd = GetNextGreater(mEndInstances, tempBegin->Time(), endPos);
}
// If all the ends are before the beginning we have a bad interval UNLESS:
// a) We have end events which leave the interval open-ended, OR
// b) We never had any end attribute to begin with (and hence we should
// just use the active duration after allowing for the possibility of
// an end instance provided by a DOM call)
// c) We have an end attribute but no end instances--this is a special
// case that is needed for syncbase timing so that animations of the
// following sort: <animate id="a" end="a.begin+1s" ... /> can be
// resolved (see SVGT 1.2 Test Suite animate-elem-221-t.svg) by first
// establishing an interval of unresolved duration.
PRBool openEndedIntervalOk = mEndHasEventConditions ||
mEndSpecs.IsEmpty() ||
mEndInstances.IsEmpty();
if (!tempEnd && !openEndedIntervalOk)
return NS_ERROR_FAILURE; // Bad interval
nsSMILTimeValue intervalEnd = tempEnd
? tempEnd->Time() : nsSMILTimeValue();
nsSMILTimeValue activeEnd = CalcActiveEnd(tempBegin->Time(), intervalEnd);
if (!tempEnd || intervalEnd != activeEnd) {
tempEnd = new nsSMILInstanceTime(activeEnd);
}
if (!tempEnd)
return NS_ERROR_OUT_OF_MEMORY;
}
NS_ABORT_IF_FALSE(tempEnd, "Failed to get end point for next interval");
// If we get two zero-length intervals in a row we will potentially have an
// infinite loop so we break it here by searching for the next begin time
// greater than tempEnd on the next time around.
if (tempEnd->Time().IsResolved() && tempBegin->Time() == tempEnd->Time()) {
if (prevIntervalWasZeroDur) {
beginAfter.SetMillis(tempEnd->Time().GetMillis() + 1);
prevIntervalWasZeroDur = PR_FALSE;
continue;
}
prevIntervalWasZeroDur = PR_TRUE;
}
// Check for valid interval
if (tempEnd->Time() > zeroTime ||
(tempBegin->Time() == zeroTime && tempEnd->Time() == zeroTime)) {
aResult.Set(*tempBegin, *tempEnd);
return NS_OK;
}
if (mRestartMode == RESTART_NEVER) {
// tempEnd <= 0 so we're going to loop which effectively means restarting
return NS_ERROR_FAILURE;
}
beginAfter = tempEnd->Time();
}
NS_NOTREACHED("Hmm... we really shouldn't be here");
return NS_ERROR_FAILURE;
}
nsSMILInstanceTime*
nsSMILTimedElement::GetNextGreater(const InstanceTimeList& aList,
const nsSMILTimeValue& aBase,
PRInt32& aPosition) const
{
nsSMILInstanceTime* result = nsnull;
while ((result = GetNextGreaterOrEqual(aList, aBase, aPosition)) &&
result->Time() == aBase);
return result;
}
nsSMILInstanceTime*
nsSMILTimedElement::GetNextGreaterOrEqual(const InstanceTimeList& aList,
const nsSMILTimeValue& aBase,
PRInt32& aPosition) const
{
nsSMILInstanceTime* result = nsnull;
PRInt32 count = aList.Length();
for (; aPosition < count && !result; ++aPosition) {
nsSMILInstanceTime* val = aList[aPosition].get();
NS_ABORT_IF_FALSE(val, "NULL instance time in list");
if (val->Time() >= aBase) {
result = val;
}
}
return result;
}
/**
* @see SMILANIM 3.3.4
*/
nsSMILTimeValue
nsSMILTimedElement::CalcActiveEnd(const nsSMILTimeValue& aBegin,
const nsSMILTimeValue& aEnd) const
{
nsSMILTimeValue result;
NS_ABORT_IF_FALSE(mSimpleDur.IsResolved() || mSimpleDur.IsIndefinite(),
"Unresolved simple duration in CalcActiveEnd");
NS_ABORT_IF_FALSE(aBegin.IsResolved(),
"Unresolved begin time in CalcActiveEnd");
if (mRepeatDur.IsIndefinite()) {
result.SetIndefinite();
} else {
result = GetRepeatDuration();
}
if (aEnd.IsResolved()) {
nsSMILTime activeDur = aEnd.GetMillis() - aBegin.GetMillis();
if (result.IsResolved()) {
result.SetMillis(NS_MIN(result.GetMillis(), activeDur));
} else {
result.SetMillis(activeDur);
}
}
result = ApplyMinAndMax(result);
if (result.IsResolved()) {
nsSMILTime activeEnd = result.GetMillis() + aBegin.GetMillis();
result.SetMillis(activeEnd);
}
return result;
}
nsSMILTimeValue
nsSMILTimedElement::GetRepeatDuration() const
{
nsSMILTimeValue result;
if (mRepeatCount.IsDefinite() && mRepeatDur.IsResolved()) {
if (mSimpleDur.IsResolved()) {
nsSMILTime activeDur =
nsSMILTime(mRepeatCount * double(mSimpleDur.GetMillis()));
result.SetMillis(NS_MIN(activeDur, mRepeatDur.GetMillis()));
} else {
result = mRepeatDur;
}
} else if (mRepeatCount.IsDefinite() && mSimpleDur.IsResolved()) {
nsSMILTime activeDur =
nsSMILTime(mRepeatCount * double(mSimpleDur.GetMillis()));
result.SetMillis(activeDur);
} else if (mRepeatDur.IsResolved()) {
result = mRepeatDur;
} else if (mRepeatCount.IsIndefinite()) {
result.SetIndefinite();
} else {
result = mSimpleDur;
}
return result;
}
nsSMILTimeValue
nsSMILTimedElement::ApplyMinAndMax(const nsSMILTimeValue& aDuration) const
{
if (!aDuration.IsResolved() && !aDuration.IsIndefinite()) {
return aDuration;
}
if (mMax < mMin) {
return aDuration;
}
nsSMILTimeValue result;
if (aDuration > mMax) {
result = mMax;
} else if (aDuration < mMin) {
nsSMILTimeValue repeatDur = GetRepeatDuration();
result = mMin > repeatDur ? repeatDur : mMin;
} else {
result = aDuration;
}
return result;
}
nsSMILTime
nsSMILTimedElement::ActiveTimeToSimpleTime(nsSMILTime aActiveTime,
PRUint32& aRepeatIteration)
{
nsSMILTime result;
NS_ASSERTION(mSimpleDur.IsResolved() || mSimpleDur.IsIndefinite(),
"Unresolved simple duration in ActiveTimeToSimpleTime");
if (mSimpleDur.IsIndefinite() || mSimpleDur.GetMillis() == 0L) {
aRepeatIteration = 0;
result = aActiveTime;
} else {
result = aActiveTime % mSimpleDur.GetMillis();
aRepeatIteration = (PRUint32)(aActiveTime / mSimpleDur.GetMillis());
}
return result;
}
//
// Although in many cases it would be possible to check for an early end and
// adjust the current interval well in advance the SMIL Animation spec seems to
// indicate that we should only apply an early end at the latest possible
// moment. In particular, this paragraph from section 3.6.8:
//
// 'If restart is set to "always", then the current interval will end early if
// there is an instance time in the begin list that is before (i.e. earlier
// than) the defined end for the current interval. Ending in this manner will
// also send a changed time notice to all time dependents for the current
// interval end.'
//
nsSMILInstanceTime*
nsSMILTimedElement::CheckForEarlyEnd(
const nsSMILTimeValue& aContainerTime) const
{
NS_ABORT_IF_FALSE(mCurrentInterval,
"Checking for an early end but the current interval is not set");
if (mRestartMode != RESTART_ALWAYS)
return nsnull;
PRInt32 position = 0;
nsSMILInstanceTime* nextBegin =
GetNextGreater(mBeginInstances, mCurrentInterval->Begin()->Time(),
position);
if (nextBegin &&
nextBegin->Time() > mCurrentInterval->Begin()->Time() &&
nextBegin->Time() < mCurrentInterval->End()->Time() &&
nextBegin->Time() <= aContainerTime) {
return nextBegin;
}
return nsnull;
}
void
nsSMILTimedElement::UpdateCurrentInterval(PRBool aForceChangeNotice)
{
// We adopt the convention of not resolving intervals until the first
// sample. Otherwise, every time each attribute is set we'll re-resolve the
// current interval and notify all our time dependents of the change.
//
// The disadvantage of deferring resolving the interval is that DOM calls to
// to getStartTime will throw an INVALID_STATE_ERR exception until the
// document timeline begins since the start time has not yet been resolved.
if (mElementState == STATE_STARTUP)
return;
// If the interval is active the begin time is fixed.
const nsSMILInstanceTime* beginTime = mElementState == STATE_ACTIVE
? mCurrentInterval->Begin()
: nsnull;
nsSMILInterval updatedInterval;
nsresult rv =
GetNextInterval(GetPreviousInterval(), beginTime, updatedInterval);
if (NS_SUCCEEDED(rv)) {
if (mElementState == STATE_POSTACTIVE) {
NS_ABORT_IF_FALSE(!mCurrentInterval,
"In postactive state but the interval has been set");
mCurrentInterval = new nsSMILInterval(updatedInterval);
if (!mCurrentInterval) {
NS_WARNING("Failed to allocate memory for new interval.");
return;
}
mElementState = STATE_WAITING;
NotifyNewInterval();
} else {
PRBool changed = PR_FALSE;
if (mElementState != STATE_ACTIVE &&
!updatedInterval.Begin()->SameTimeAndBase(
*mCurrentInterval->Begin())) {
mCurrentInterval->SetBegin(*updatedInterval.Begin());
changed = PR_TRUE;
}
if (!updatedInterval.End()->SameTimeAndBase(*mCurrentInterval->End())) {
mCurrentInterval->SetEnd(*updatedInterval.End());
changed = PR_TRUE;
}
if (changed || aForceChangeNotice) {
NotifyChangedInterval();
}
}
// There's a chance our next milestone has now changed, so update the time
// container
RegisterMilestone();
} else {
if (mElementState == STATE_ACTIVE && mClient) {
// Only apply a fill if it was already being applied before the (now
// deleted) interval was created
PRBool applyFill = HasPlayed() && mFillMode == FILL_FREEZE;
mClient->Inactivate(applyFill);
}
if (mElementState == STATE_ACTIVE || mElementState == STATE_WAITING) {
mElementState = STATE_POSTACTIVE;
mCurrentInterval->NotifyDeleting();
mCurrentInterval = nsnull;
}
}
}
void
nsSMILTimedElement::SampleSimpleTime(nsSMILTime aActiveTime)
{
if (mClient) {
PRUint32 repeatIteration;
nsSMILTime simpleTime =
ActiveTimeToSimpleTime(aActiveTime, repeatIteration);
mClient->SampleAt(simpleTime, mSimpleDur, repeatIteration);
}
}
void
nsSMILTimedElement::SampleFillValue()
{
if (mFillMode != FILL_FREEZE || !mClient)
return;
const nsSMILInterval* prevInterval = GetPreviousInterval();
NS_ABORT_IF_FALSE(prevInterval,
"Attempting to sample fill value but there is no previous interval");
NS_ABORT_IF_FALSE(prevInterval->End()->Time().IsResolved() &&
!prevInterval->End()->MayUpdate(),
"Attempting to sample fill value but the endpoint of the previous "
"interval is not resolved and frozen");
nsSMILTime activeTime = prevInterval->End()->Time().GetMillis() -
prevInterval->Begin()->Time().GetMillis();
PRUint32 repeatIteration;
nsSMILTime simpleTime =
ActiveTimeToSimpleTime(activeTime, repeatIteration);
if (simpleTime == 0L && repeatIteration) {
mClient->SampleLastValue(--repeatIteration);
} else {
mClient->SampleAt(simpleTime, mSimpleDur, repeatIteration);
}
}
void
nsSMILTimedElement::AddInstanceTimeFromCurrentTime(nsSMILTime aCurrentTime,
double aOffsetSeconds, PRBool aIsBegin)
{
double offset = aOffsetSeconds * PR_MSEC_PER_SEC;
nsSMILTime timeWithOffset = aCurrentTime + PRInt64(NS_round(offset));
nsSMILTimeValue timeVal(timeWithOffset);
// XXX If we re-use this method for event-based timing we'll need to change it
// so we don't end up setting SOURCE_DOM for event-based times.
nsRefPtr<nsSMILInstanceTime> instanceTime =
new nsSMILInstanceTime(timeVal, nsSMILInstanceTime::SOURCE_DOM);
if (!instanceTime) {
NS_WARNING("Insufficient memory to create instance time");
return;
}
AddInstanceTime(instanceTime, aIsBegin);
}
void
nsSMILTimedElement::RegisterMilestone()
{
nsSMILTimeContainer* container = GetTimeContainer();
if (!container)
return;
NS_ABORT_IF_FALSE(mAnimationElement,
"Got a time container without an owning animation element");
nsSMILMilestone nextMilestone;
if (!GetNextMilestone(nextMilestone))
return;
// This method is called every time we might possibly have updated our
// current interval, but since nsSMILTimeContainer makes no attempt to filter
// out redundant milestones we do some rudimentary filtering here. It's not
// perfect, but unnecessary samples are fairly cheap.
if (nextMilestone >= mPrevRegisteredMilestone)
return;
container->AddMilestone(nextMilestone, *mAnimationElement);
mPrevRegisteredMilestone = nextMilestone;
}
PRBool
nsSMILTimedElement::GetNextMilestone(nsSMILMilestone& aNextMilestone) const
{
// Return the next key moment in our lifetime.
//
// XXX Once we implement TimeEvents and event based timing we might need to
// include repeat times too, particularly if it's important to get them in
// order.
//
// XXX It may be possible in future to optimise this so that we only register
// for milestones if:
// a) We have time dependents, or
// b) We are dependent on events or syncbase relationships, or
// c) There are registered listeners for our events
//
// Then for the simple case where everything uses offset values we could
// ignore milestones altogether.
//
// We'd need to be careful, however, that if one of those conditions became
// true in between samples that we registered our next milestone at that
// point.
switch (mElementState)
{
case STATE_STARTUP:
// All elements register for an initial end sample at t=0 where we resolve
// our initial interval.
aNextMilestone.mIsEnd = PR_TRUE; // Initial sample should be an end sample
aNextMilestone.mTime = 0;
return PR_TRUE;
case STATE_WAITING:
NS_ABORT_IF_FALSE(mCurrentInterval,
"In waiting state but the current interval has not been set");
aNextMilestone.mIsEnd = PR_FALSE;
aNextMilestone.mTime = mCurrentInterval->Begin()->Time().GetMillis();
return PR_TRUE;
case STATE_ACTIVE:
{
// XXX When we implement TimeEvents, we may need to consider what comes
// next: the interval end or an interval repeat.
// Check for an early end
nsSMILInstanceTime* earlyEnd =
CheckForEarlyEnd(mCurrentInterval->End()->Time());
if (earlyEnd) {
aNextMilestone.mIsEnd = PR_TRUE;
aNextMilestone.mTime = earlyEnd->Time().GetMillis();
return PR_TRUE;
}
// Otherwise it's just the next interval end
if (mCurrentInterval->End()->Time().IsResolved()) {
aNextMilestone.mIsEnd = PR_TRUE;
aNextMilestone.mTime = mCurrentInterval->End()->Time().GetMillis();
return PR_TRUE;
}
return PR_FALSE;
}
case STATE_POSTACTIVE:
return PR_FALSE;
default:
NS_ABORT_IF_FALSE(PR_FALSE, "Invalid element state");
return PR_FALSE;
}
}
void
nsSMILTimedElement::NotifyNewInterval()
{
NS_ABORT_IF_FALSE(mCurrentInterval,
"Attempting to notify dependents of a new interval but the interval "
"is not set");
nsSMILTimeContainer* container = GetTimeContainer();
if (container) {
container->SyncPauseTime();
}
NotifyTimeDependentsParams params = { mCurrentInterval, container };
mTimeDependents.EnumerateEntries(NotifyNewIntervalCallback, &params);
}
void
nsSMILTimedElement::NotifyChangedInterval()
{
NS_ABORT_IF_FALSE(mCurrentInterval,
"Attempting to notify dependents of a changed interval but the interval "
"is not set--perhaps we should be deleting the interval instead?");
nsSMILTimeContainer* container = GetTimeContainer();
if (container) {
container->SyncPauseTime();
}
mCurrentInterval->NotifyChanged(container);
}
const nsSMILInstanceTime*
nsSMILTimedElement::GetEffectiveBeginInstance() const
{
switch (mElementState)
{
case STATE_STARTUP:
return nsnull;
case STATE_ACTIVE:
return mCurrentInterval->Begin();
case STATE_WAITING:
case STATE_POSTACTIVE:
{
const nsSMILInterval* prevInterval = GetPreviousInterval();
return prevInterval ? prevInterval->Begin() : nsnull;
}
default:
NS_NOTREACHED("Invalid element state");
return nsnull;
}
}
const nsSMILInterval*
nsSMILTimedElement::GetPreviousInterval() const
{
return mOldIntervals.IsEmpty()
? nsnull
: mOldIntervals[mOldIntervals.Length()-1].get();
}
//----------------------------------------------------------------------
// Hashtable callback functions
/* static */ PR_CALLBACK PLDHashOperator
nsSMILTimedElement::NotifyNewIntervalCallback(TimeValueSpecPtrKey* aKey,
void* aData)
{
NS_ABORT_IF_FALSE(aKey, "Null hash key for time container hash table");
NS_ABORT_IF_FALSE(aKey->GetKey(),
"null nsSMILTimeValueSpec in set of time dependents");
NotifyTimeDependentsParams* params =
static_cast<NotifyTimeDependentsParams*>(aData);
NS_ABORT_IF_FALSE(params, "null data ptr while enumerating hashtable");
NS_ABORT_IF_FALSE(params->mCurrentInterval, "null current-interval ptr");
nsSMILTimeValueSpec* spec = aKey->GetKey();
spec->HandleNewInterval(*params->mCurrentInterval, params->mTimeContainer);
return PL_DHASH_NEXT;
}
Ссылка в новой задаче Показать git blame Копировать постоянную ссылку