gecko-dev/hal/gonk/GonkSensor.cpp

291 строка
7.8 KiB
C++

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* Copyright 2012 Mozilla Foundation and Mozilla contributors
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include <pthread.h>
#include <stdio.h>
#include "mozilla/DebugOnly.h"
#include "base/basictypes.h"
#include "base/thread.h"
#include "Hal.h"
#include "HalSensor.h"
#include "hardware/sensors.h"
#undef LOG
#include <android/log.h>
using namespace mozilla::hal;
#define LOGE(args...) __android_log_print(ANDROID_LOG_ERROR, "GonkSensor" , ## args)
#define LOGW(args...) __android_log_print(ANDROID_LOG_WARN, "GonkSensor" , ## args)
namespace mozilla {
// The value from SensorDevice.h (Android)
#define DEFAULT_DEVICE_POLL_RATE 200000000 /*200ms*/
double radToDeg(double a) {
return a * (180.0 / M_PI);
}
static SensorType
HardwareSensorToHalSensor(int type)
{
switch(type) {
case SENSOR_TYPE_ORIENTATION:
return SENSOR_ORIENTATION;
case SENSOR_TYPE_ACCELEROMETER:
return SENSOR_ACCELERATION;
case SENSOR_TYPE_PROXIMITY:
return SENSOR_PROXIMITY;
case SENSOR_TYPE_LIGHT:
return SENSOR_LIGHT;
case SENSOR_TYPE_GYROSCOPE:
return SENSOR_GYROSCOPE;
case SENSOR_TYPE_LINEAR_ACCELERATION:
return SENSOR_LINEAR_ACCELERATION;
default:
return SENSOR_UNKNOWN;
}
}
static SensorAccuracyType
HardwareStatusToHalAccuracy(int status) {
return static_cast<SensorAccuracyType>(status);
}
static int
HalSensorToHardwareSensor(SensorType type)
{
switch(type) {
case SENSOR_ORIENTATION:
return SENSOR_TYPE_ORIENTATION;
case SENSOR_ACCELERATION:
return SENSOR_TYPE_ACCELEROMETER;
case SENSOR_PROXIMITY:
return SENSOR_TYPE_PROXIMITY;
case SENSOR_LIGHT:
return SENSOR_TYPE_LIGHT;
case SENSOR_GYROSCOPE:
return SENSOR_TYPE_GYROSCOPE;
case SENSOR_LINEAR_ACCELERATION:
return SENSOR_TYPE_LINEAR_ACCELERATION;
default:
return -1;
}
}
static int
SensorseventStatus(const sensors_event_t& data)
{
int type = data.type;
switch(type) {
case SENSOR_ORIENTATION:
return data.orientation.status;
case SENSOR_LINEAR_ACCELERATION:
case SENSOR_ACCELERATION:
return data.acceleration.status;
case SENSOR_GYROSCOPE:
return data.gyro.status;
}
return SENSOR_STATUS_UNRELIABLE;
}
class SensorRunnable : public nsRunnable
{
public:
SensorRunnable(const sensors_event_t& data, const sensor_t* sensors, ssize_t size)
{
mSensorData.sensor() = HardwareSensorToHalSensor(data.type);
mSensorData.accuracy() = HardwareStatusToHalAccuracy(SensorseventStatus(data));
mSensorData.timestamp() = data.timestamp;
if (mSensorData.sensor() == SENSOR_GYROSCOPE) {
// libhardware returns gyro as rad. convert.
mSensorValues.AppendElement(radToDeg(data.data[0]));
mSensorValues.AppendElement(radToDeg(data.data[1]));
mSensorValues.AppendElement(radToDeg(data.data[2]));
} else if (mSensorData.sensor() == SENSOR_PROXIMITY) {
mSensorValues.AppendElement(data.data[0]);
mSensorValues.AppendElement(0);
// Determine the maxRange for this sensor.
for (ssize_t i = 0; i < size; i++) {
if (sensors[i].type == SENSOR_TYPE_PROXIMITY) {
mSensorValues.AppendElement(sensors[i].maxRange);
}
}
} else if (mSensorData.sensor() == SENSOR_LIGHT) {
mSensorValues.AppendElement(data.data[0]);
} else {
mSensorValues.AppendElement(data.data[0]);
mSensorValues.AppendElement(data.data[1]);
mSensorValues.AppendElement(data.data[2]);
}
mSensorData.values() = mSensorValues;
}
~SensorRunnable() {}
NS_IMETHOD Run()
{
NotifySensorChange(mSensorData);
return NS_OK;
}
private:
SensorData mSensorData;
InfallibleTArray<float> mSensorValues;
};
namespace hal_impl {
static DebugOnly<int> sSensorRefCount[NUM_SENSOR_TYPE];
static base::Thread* sPollingThread;
static sensors_poll_device_t* sSensorDevice;
static sensors_module_t* sSensorModule;
static void
PollSensors()
{
const size_t numEventMax = 16;
sensors_event_t buffer[numEventMax];
const sensor_t* sensors;
int size = sSensorModule->get_sensors_list(sSensorModule, &sensors);
do {
// didn't check sSensorDevice because already be done on creating pollingThread.
int n = sSensorDevice->poll(sSensorDevice, buffer, numEventMax);
if (n < 0) {
LOGE("Error polling for sensor data (err=%d)", n);
break;
}
for (int i = 0; i < n; ++i) {
// FIXME: bug 802004, add proper support for the magnetic field sensor.
if (buffer[i].type == SENSOR_TYPE_MAGNETIC_FIELD)
continue;
if (HardwareSensorToHalSensor(buffer[i].type) == SENSOR_UNKNOWN) {
// Emulator is broken and gives us events without types set
int index;
for (index = 0; index < size; index++) {
if (sensors[index].handle == buffer[i].sensor) {
break;
}
}
if (index < size &&
HardwareSensorToHalSensor(sensors[index].type) != SENSOR_UNKNOWN) {
buffer[i].type = sensors[index].type;
} else {
LOGW("Could not determine sensor type of event");
continue;
}
}
NS_DispatchToMainThread(new SensorRunnable(buffer[i], sensors, size));
}
} while (true);
}
static void
SwitchSensor(bool aActivate, sensor_t aSensor, pthread_t aThreadId)
{
int index = HardwareSensorToHalSensor(aSensor.type);
MOZ_ASSERT(sSensorRefCount[index] || aActivate);
sSensorDevice->activate(sSensorDevice, aSensor.handle, aActivate);
if (aActivate) {
sSensorDevice->setDelay(sSensorDevice, aSensor.handle,
DEFAULT_DEVICE_POLL_RATE);
}
if (aActivate) {
sSensorRefCount[index]++;
} else {
sSensorRefCount[index]--;
}
}
static void
SetSensorState(SensorType aSensor, bool activate)
{
int type = HalSensorToHardwareSensor(aSensor);
const sensor_t* sensors = NULL;
int size = sSensorModule->get_sensors_list(sSensorModule, &sensors);
for (ssize_t i = 0; i < size; i++) {
if (sensors[i].type == type) {
SwitchSensor(activate, sensors[i], pthread_self());
break;
}
}
}
void
EnableSensorNotifications(SensorType aSensor)
{
if (!sSensorModule) {
hw_get_module(SENSORS_HARDWARE_MODULE_ID,
(hw_module_t const**)&sSensorModule);
if (!sSensorModule) {
LOGE("Can't get sensor HAL module\n");
return;
}
sensors_open(&sSensorModule->common, &sSensorDevice);
if (!sSensorDevice) {
sSensorModule = NULL;
LOGE("Can't get sensor poll device from module \n");
return;
}
sensor_t const* sensors;
int count = sSensorModule->get_sensors_list(sSensorModule, &sensors);
for (size_t i=0 ; i<size_t(count) ; i++) {
sSensorDevice->activate(sSensorDevice, sensors[i].handle, 0);
}
}
if (!sPollingThread) {
sPollingThread = new base::Thread("GonkSensors");
MOZ_ASSERT(sPollingThread);
// sPollingThread never terminates because poll may never return
sPollingThread->Start();
sPollingThread->message_loop()->PostTask(FROM_HERE,
NewRunnableFunction(PollSensors));
}
SetSensorState(aSensor, true);
}
void
DisableSensorNotifications(SensorType aSensor)
{
if (!sSensorModule) {
return;
}
SetSensorState(aSensor, false);
}
} // hal_impl
} // mozilla