gecko-dev/dom/filesystem/FileSystemTaskBase.h

243 строки
9.4 KiB
C++

/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* vim: set ts=8 sts=2 et sw=2 tw=80: */
/* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this file,
* You can obtain one at http://mozilla.org/MPL/2.0/. */
#ifndef mozilla_dom_FileSystemTaskBase_h
#define mozilla_dom_FileSystemTaskBase_h
#include "mozilla/ErrorResult.h"
#include "mozilla/dom/FileSystemRequestParent.h"
#include "mozilla/dom/PFileSystemRequestChild.h"
namespace mozilla {
namespace dom {
class BlobImpl;
class BlobParent;
class FileSystemBase;
class FileSystemParams;
/*
* The base class to implement a Task class.
* The task is used to handle the OOP (out of process) operations.
* The file system operations can only be performed in the parent process. When
* performing such a parent-process-only operation, a task will delivered the
* operation to the parent process if needed.
*
* The following diagram illustrates the how a API call from the content page
* starts a task and gets call back results.
*
* The left block is the call sequence inside the child process, while the
* right block is the call sequence inside the parent process.
*
* There are two types of API call. One is from the content page of the child
* process and we mark the steps as (1) to (8). The other is from the content
* page of the parent process and we mark the steps as (1') to (4').
*
* Page Page
* | |
* | (1) | (1')
* ______|________________ | _____________________|_____________
* | | | | | | |
* | | Task in | | | Task in | |
* | | Child Process | | | Parent Process | |
* | V | IPC | V |
* [new FileSystemTaskBase()] | | [new FileSystemTaskBase()] |
* | | | | | | |
* | | (2) | | | (2') |
* | V | (3) | | |
* | [GetRequestParams]------------->[new FileSystemTaskBase(...)] |
* | | | | | |
* | | | | | (4) | |
* | | | | | V |
* | | | | -----------> [Work] |
* | | IPC | | |
* | | | | (5) | (3') |
* | | | | V |
* | | | | --------[HandleResult] |
* | | | | | | |
* | | | | (6) | |
* | | (7) | V | |
* | [SetRequestResult]<-------------[GetRequestResult] | |
* | | | | | (4') |
* | | (8) | | | | |
* | V | | | V |
* |[HandlerCallback] | IPC | [HandlerCallback] |
* |_______|_______________| | |_________________________|_________|
* | | |
* V V
* Page Page
*
* 1. From child process page
* Child:
* (1) Call FileSystem API from content page with JS. Create a task and run.
* The base constructor [FileSystemTaskBase()] of the task should be called.
* (2) Forward the task to the parent process through the IPC and call
* [GetRequestParams] to prepare the parameters of the IPC.
* Parent:
* (3) The parent process receives IPC and handle it in
* FileystemRequestParent.
* Get the IPC parameters and create a task to run the IPC task. The base
* constructor [FileSystemTaskBase(aParam, aParent)] of the task should be
* called to set the task as an IPC task.
* (4) The task operation will be performed in the member function of [Work].
* A worker thread will be created to run that function. If error occurs
* during the operation, call [SetError] to record the error and then abort.
* (5) After finishing the task operation, call [HandleResult] to send the
* result back to the child process though the IPC.
* (6) Call [GetRequestResult] request result to prepare the parameters of the
* IPC. Because the formats of the error result for different task are the
* same, FileSystemTaskBase can handle the error message without interfering.
* Each task only needs to implement its specific success result preparation
* function -[GetSuccessRequestResult].
* Child:
* (7) The child process receives IPC and calls [SetRequestResult] to get the
* task result. Each task needs to implement its specific success result
* parsing function [SetSuccessRequestResult] to get the success result.
* (8) Call [HandlerCallback] to send the task result to the content page.
* 2. From parent process page
* We don't need to send the task parameters and result to other process. So
* there are less steps, but their functions are the same. The correspondence
* between the two types of steps is:
* (1') = (1),
* (2') = (4),
* (3') = (5),
* (4') = (8).
*/
class FileSystemTaskBase
: public nsRunnable
, public PFileSystemRequestChild
{
public:
/*
* Start the task. If the task is running the child process, it will be
* forwarded to parent process by IPC, or else, creates a worker thread to
* do the task work.
*/
void
Start();
/*
* The error codes are defined in xpcom/base/ErrorList.h and their
* corresponding error name and message are defined in dom/base/domerr.msg.
*/
void
SetError(const nsresult& aErrorCode);
FileSystemBase*
GetFileSystem() const;
/*
* Get the type of permission access required to perform this task.
*/
virtual void
GetPermissionAccessType(nsCString& aAccess) const = 0;
NS_DECL_NSIRUNNABLE
protected:
/*
* To create a task to handle the page content request.
*/
explicit FileSystemTaskBase(FileSystemBase* aFileSystem);
/*
* To create a parent process task delivered from the child process through
* IPC.
*/
FileSystemTaskBase(FileSystemBase* aFileSystem,
const FileSystemParams& aParam,
FileSystemRequestParent* aParent);
virtual
~FileSystemTaskBase();
/*
* The function to perform task operation. It will be run on the worker
* thread of the parent process.
* Overrides this function to define the task operation for individual task.
*/
virtual nsresult
Work() = 0;
/*
* After the task is completed, this function will be called to pass the task
* result to the content page.
* Override this function to handle the call back to the content page.
*/
virtual void
HandlerCallback() = 0;
/*
* Wrap the task parameter to FileSystemParams for sending it through IPC.
* It will be called when we need to forward a task from the child process to
* the prarent process.
* @param filesystem The string representation of the file system.
*/
virtual FileSystemParams
GetRequestParams(const nsString& aFileSystem) const = 0;
/*
* Wrap the task success result to FileSystemResponseValue for sending it
* through IPC.
* It will be called when the task is completed successfully and we need to
* send the task success result back to the child process.
*/
virtual FileSystemResponseValue
GetSuccessRequestResult() const = 0;
/*
* Unwrap the IPC message to get the task success result.
* It will be called when the task is completed successfully and an IPC
* message is received in the child process and we want to get the task
* success result.
*/
virtual void
SetSuccessRequestResult(const FileSystemResponseValue& aValue) = 0;
bool
HasError() const { return mErrorValue != NS_OK; }
// Overrides PFileSystemRequestChild
virtual bool
Recv__delete__(const FileSystemResponseValue& value) override;
BlobParent*
GetBlobParent(BlobImpl* aBlob) const;
nsresult mErrorValue;
RefPtr<FileSystemBase> mFileSystem;
RefPtr<FileSystemRequestParent> mRequestParent;
private:
/*
* After finishing the task operation, handle the task result.
* If it is an IPC task, send back the IPC result. Or else, send the result
* to the content page.
*/
void
HandleResult();
/*
* Wrap the task result to FileSystemResponseValue for sending it through IPC.
* It will be called when the task is completed and we need to
* send the task result back to the child process.
*/
FileSystemResponseValue
GetRequestResult() const;
/*
* Unwrap the IPC message to get the task result.
* It will be called when the task is completed and an IPC message is received
* in the child process and we want to get the task result.
*/
void
SetRequestResult(const FileSystemResponseValue& aValue);
};
} // namespace dom
} // namespace mozilla
#endif // mozilla_dom_FileSystemTaskBase_h