gecko-dev/client.mk

417 строки
13 KiB
Makefile

# ***** BEGIN LICENSE BLOCK *****
# Version: MPL 1.1/GPL 2.0/LGPL 2.1
#
# The contents of this file are subject to the Mozilla Public License Version
# 1.1 (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
# http://www.mozilla.org/MPL/
#
# Software distributed under the License is distributed on an "AS IS" basis,
# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
# for the specific language governing rights and limitations under the
# License.
#
# The Original Code is mozilla.org code.
#
# The Initial Developer of the Original Code is
# Netscape Communications Corporation.
# Portions created by the Initial Developer are Copyright (C) 1998
# the Initial Developer. All Rights Reserved.
#
# Contributor(s):
# Stephen Lamm
# Benjamin Smedberg <bsmedberg@covad.net>
# Chase Phillips <chase@mozilla.org>
# Mark Mentovai <mark@moxienet.com>
#
# Alternatively, the contents of this file may be used under the terms of
# either the GNU General Public License Version 2 or later (the "GPL"), or
# the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
# in which case the provisions of the GPL or the LGPL are applicable instead
# of those above. If you wish to allow use of your version of this file only
# under the terms of either the GPL or the LGPL, and not to allow others to
# use your version of this file under the terms of the MPL, indicate your
# decision by deleting the provisions above and replace them with the notice
# and other provisions required by the GPL or the LGPL. If you do not delete
# the provisions above, a recipient may use your version of this file under
# the terms of any one of the MPL, the GPL or the LGPL.
#
# ***** END LICENSE BLOCK *****
# Build a mozilla application.
#
# To build a tree,
# 1. hg clone ssh://hg.mozilla.org/mozilla-central mozilla
# 2. cd mozilla
# 3. create your .mozconfig file with
# mk_add_options MOZ_CO_PROJECT=
# suite,browser
# 4. gmake -f client.mk
#
# Other targets (gmake -f client.mk [targets...]),
# build
# clean (realclean is now the same as clean)
# distclean
#
# See http://developer.mozilla.org/en/docs/Build_Documentation for
# more information.
#
# Options:
# MOZ_BUILD_PROJECTS - Build multiple projects in subdirectories
# of MOZ_OBJDIR
# MOZ_OBJDIR - Destination object directory
# MOZ_MAKE_FLAGS - Flags to pass to $(MAKE)
# MOZ_PREFLIGHT_ALL } - Makefiles to run before any project in
# MOZ_PREFLIGHT } MOZ_BUILD_PROJECTS, before each project, after
# MOZ_POSTFLIGHT } each project, and after all projects; these
# MOZ_POSTFLIGHT_ALL } variables contain space-separated lists
# MOZ_UNIFY_BDATE - Set to use the same bdate for each project in
# MOZ_BUILD_PROJECTS
#
#######################################################################
# Defines
#
CVS = cvs
comma := ,
CWD := $(shell pwd)
ifneq (1,$(words $(CWD)))
$(error The mozilla directory cannot be located in a path with spaces.)
endif
ifeq "$(CWD)" "/"
CWD := /.
endif
ifndef TOPSRCDIR
ifeq (,$(wildcard client.mk))
$(error Must run from the client.mk directory, or specify TOPSRCDIR)
endif
TOPSRCDIR = $(CWD)
endif
ifeq (Darwin,$(shell uname -s))
AUTOCONF ?= autoconf213
else
AUTOCONF ?= autoconf-2.13
endif
MKDIR := mkdir
SH := /bin/sh
ifndef MAKE
MAKE := gmake
endif
PERL ?= perl
PYTHON ?= python
RUN_AUTOCONF_LOCALLY = 1
CONFIG_GUESS_SCRIPT := $(wildcard $(TOPSRCDIR)/build/autoconf/config.guess)
ifdef CONFIG_GUESS_SCRIPT
CONFIG_GUESS = $(shell $(CONFIG_GUESS_SCRIPT))
endif
####################################
# Sanity checks
ifneq (,$(filter MINGW%,$(shell uname -s)))
# check for CRLF line endings
ifneq (0,$(shell $(PERL) -e 'binmode(STDIN); while (<STDIN>) { if (/\r/) { print "1"; exit } } print "0"' < $(TOPSRCDIR)/client.mk))
$(error This source tree appears to have Windows-style line endings. To \
convert it to Unix-style line endings, run \
"python mozilla/build/win32/mozilla-dos2unix.py")
endif
endif
####################################
# Load mozconfig Options
# See build pages, http://www.mozilla.org/build/ for how to set up mozconfig.
MOZCONFIG_LOADER := build/autoconf/mozconfig2client-mk
MOZCONFIG_FINDER := build/autoconf/mozconfig-find
MOZCONFIG_MODULES := build/unix/uniq.pl
run_for_side_effects := \
$(shell $(TOPSRCDIR)/$(MOZCONFIG_LOADER) $(TOPSRCDIR) $(TOPSRCDIR)/.mozconfig.mk > $(TOPSRCDIR)/.mozconfig.out)
include $(TOPSRCDIR)/.mozconfig.mk
ifdef MOZ_BUILD_PROJECTS
ifndef MOZ_OBJDIR
$(error When MOZ_BUILD_PROJECTS is set, you must set MOZ_OBJDIR)
endif
ifdef MOZ_CURRENT_PROJECT
OBJDIR = $(MOZ_OBJDIR)/$(MOZ_CURRENT_PROJECT)
MOZ_MAKE = $(MAKE) $(MOZ_MAKE_FLAGS) -C $(OBJDIR)
BUILD_PROJECT_ARG = MOZ_BUILD_APP=$(MOZ_CURRENT_PROJECT)
else
OBJDIR = $(error Cannot find the OBJDIR when MOZ_CURRENT_PROJECT is not set.)
MOZ_MAKE = $(error Cannot build in the OBJDIR when MOZ_CURRENT_PROJECT is not set.)
endif
else # MOZ_BUILD_PROJECTS
ifdef MOZ_OBJDIR
OBJDIR = $(MOZ_OBJDIR)
MOZ_MAKE = $(MAKE) $(MOZ_MAKE_FLAGS) -C $(OBJDIR)
else
OBJDIR := $(TOPSRCDIR)
MOZ_MAKE := $(MAKE) $(MOZ_MAKE_FLAGS)
endif
endif # MOZ_BUILD_PROJECTS
CONFIGURES := $(TOPSRCDIR)/configure
CONFIGURES += $(TOPSRCDIR)/nsprpub/configure
#######################################################################
# Rules
#
# The default rule is build
build::
# Print out any options loaded from mozconfig.
all build clean depend distclean export libs install realclean::
@if test -f .mozconfig.out; then \
cat .mozconfig.out; \
rm -f .mozconfig.out; \
else true; \
fi
# Windows equivalents
build_all: build
build_all_dep: alldep
build_all_depend: alldep
clobber clobber_all: clean
# Do everything from scratch
everything: clean build
####################################
# Profile-Guided Optimization
# To use this, you should set the following variables in your mozconfig
# mk_add_options PROFILE_GEN_SCRIPT=/path/to/profile-script
#
# The profile script should exercise the functionality to be included
# in the profile feedback.
#
# This is up here, outside of the MOZ_CURRENT_PROJECT logic so that this
# is usable in multi-pass builds, where you might not have a runnable
# application until all the build passes and postflight scripts have run.
ifdef MOZ_OBJDIR
PGO_OBJDIR = $(MOZ_OBJDIR)
else
PGO_OBJDIR := $(TOPSRCDIR)
endif
profiledbuild::
$(MAKE) -f $(TOPSRCDIR)/client.mk build MOZ_PROFILE_GENERATE=1
OBJDIR=${PGO_OBJDIR} $(PROFILE_GEN_SCRIPT)
$(MAKE) -f $(TOPSRCDIR)/client.mk maybe_clobber_profiledbuild
$(MAKE) -f $(TOPSRCDIR)/client.mk build MOZ_PROFILE_USE=1
#####################################################
# Build date unification
ifdef MOZ_UNIFY_BDATE
ifndef MOZ_BUILD_DATE
ifdef MOZ_BUILD_PROJECTS
MOZ_BUILD_DATE = $(shell $(PYTHON) $(TOPSRCDIR)/toolkit/xre/make-platformini.py --print-buildid)
export MOZ_BUILD_DATE
endif
endif
endif
#####################################################
# Preflight, before building any project
build alldep preflight_all::
ifeq (,$(MOZ_CURRENT_PROJECT)$(if $(MOZ_PREFLIGHT_ALL),,1))
# Don't run preflight_all for individual projects in multi-project builds
# (when MOZ_CURRENT_PROJECT is set.)
ifndef MOZ_BUILD_PROJECTS
# Building a single project, OBJDIR is usable.
set -e; \
for mkfile in $(MOZ_PREFLIGHT_ALL); do \
$(MAKE) -f $(TOPSRCDIR)/$$mkfile preflight_all TOPSRCDIR=$(TOPSRCDIR) OBJDIR=$(OBJDIR) MOZ_OBJDIR=$(MOZ_OBJDIR); \
done
else
# OBJDIR refers to the project-specific OBJDIR, which is not available at
# this point when building multiple projects. Only MOZ_OBJDIR is available.
set -e; \
for mkfile in $(MOZ_PREFLIGHT_ALL); do \
$(MAKE) -f $(TOPSRCDIR)/$$mkfile preflight_all TOPSRCDIR=$(TOPSRCDIR) MOZ_OBJDIR=$(MOZ_OBJDIR) MOZ_BUILD_PROJECTS="$(MOZ_BUILD_PROJECTS)"; \
done
endif
endif
# If we're building multiple projects, but haven't specified which project,
# loop through them.
ifeq (,$(MOZ_CURRENT_PROJECT)$(if $(MOZ_BUILD_PROJECTS),,1))
configure depend build install export libs clean realclean distclean alldep preflight postflight maybe_clobber_profiledbuild::
set -e; \
for app in $(MOZ_BUILD_PROJECTS); do \
$(MAKE) -f $(TOPSRCDIR)/client.mk $@ MOZ_CURRENT_PROJECT=$$app; \
done
else
# MOZ_CURRENT_PROJECT: either doing a single-project build, or building an
# individual project in a multi-project build.
####################################
# Configure
CONFIG_STATUS = $(wildcard $(OBJDIR)/config.status)
CONFIG_CACHE = $(wildcard $(OBJDIR)/config.cache)
ifdef RUN_AUTOCONF_LOCALLY
EXTRA_CONFIG_DEPS := \
$(TOPSRCDIR)/aclocal.m4 \
$(wildcard $(TOPSRCDIR)/build/autoconf/*.m4) \
$(NULL)
$(TOPSRCDIR)/configure: $(TOPSRCDIR)/configure.in $(EXTRA_CONFIG_DEPS)
@echo Generating $@ using autoconf
cd $(TOPSRCDIR); $(AUTOCONF)
$(TOPSRCDIR)/nsprpub/configure: $(TOPSRCDIR)/nsprpub/configure.in $(EXTRA_CONFIG_DEPS)
@echo Generating $@ using autoconf
cd $(TOPSRCDIR)/nsprpub; $(AUTOCONF)
endif
CONFIG_STATUS_DEPS := \
$(TOPSRCDIR)/configure \
$(TOPSRCDIR)/allmakefiles.sh \
$(TOPSRCDIR)/.mozconfig.mk \
$(wildcard $(TOPSRCDIR)/nsprpub/configure) \
$(wildcard $(TOPSRCDIR)/directory/c-sdk/configure) \
$(wildcard $(TOPSRCDIR)/config/milestone.txt) \
$(wildcard $(TOPSRCDIR)/config/chrome-versions.sh) \
$(wildcard $(addsuffix confvars.sh,$(wildcard $(TOPSRCDIR)/*/))) \
$(NULL)
# configure uses the program name to determine @srcdir@. Calling it without
# $(TOPSRCDIR) will set @srcdir@ to "."; otherwise, it is set to the full
# path of $(TOPSRCDIR).
ifeq ($(TOPSRCDIR),$(OBJDIR))
CONFIGURE = ./configure
else
CONFIGURE = $(TOPSRCDIR)/configure
endif
ifdef MOZ_TOOLS
CONFIGURE = $(TOPSRCDIR)/configure
endif
configure:: $(CONFIGURES)
ifdef MOZ_BUILD_PROJECTS
@if test ! -d $(MOZ_OBJDIR); then $(MKDIR) $(MOZ_OBJDIR); else true; fi
endif
@if test ! -d $(OBJDIR); then $(MKDIR) $(OBJDIR); else true; fi
@echo cd $(OBJDIR);
@echo $(CONFIGURE) $(CONFIGURE_ARGS)
@cd $(OBJDIR) && $(BUILD_PROJECT_ARG) $(CONFIGURE_ENV_ARGS) $(CONFIGURE) $(CONFIGURE_ARGS) \
|| ( echo "*** Fix above errors and then restart with\
\"$(MAKE) -f client.mk build\"" && exit 1 )
@touch $(OBJDIR)/Makefile
$(OBJDIR)/Makefile $(OBJDIR)/config.status: $(CONFIG_STATUS_DEPS)
@$(MAKE) -f $(TOPSRCDIR)/client.mk configure
ifneq (,$(CONFIG_STATUS))
$(OBJDIR)/config/autoconf.mk: $(TOPSRCDIR)/config/autoconf.mk.in
cd $(OBJDIR); \
CONFIG_FILES=config/autoconf.mk ./config.status
endif
####################################
# Depend
depend:: $(OBJDIR)/Makefile $(OBJDIR)/config.status
$(MOZ_MAKE) export && $(MOZ_MAKE) depend
####################################
# Preflight
build alldep preflight::
ifdef MOZ_PREFLIGHT
set -e; \
for mkfile in $(MOZ_PREFLIGHT); do \
$(MAKE) -f $(TOPSRCDIR)/$$mkfile preflight TOPSRCDIR=$(TOPSRCDIR) OBJDIR=$(OBJDIR) MOZ_OBJDIR=$(MOZ_OBJDIR); \
done
endif
####################################
# Build it
build:: $(OBJDIR)/Makefile $(OBJDIR)/config.status
$(MOZ_MAKE)
####################################
# Other targets
# Pass these target onto the real build system
install export libs clean realclean distclean alldep maybe_clobber_profiledbuild:: $(OBJDIR)/Makefile $(OBJDIR)/config.status
$(MOZ_MAKE) $@
####################################
# Postflight
build alldep postflight::
ifdef MOZ_POSTFLIGHT
set -e; \
for mkfile in $(MOZ_POSTFLIGHT); do \
$(MAKE) -f $(TOPSRCDIR)/$$mkfile postflight TOPSRCDIR=$(TOPSRCDIR) OBJDIR=$(OBJDIR) MOZ_OBJDIR=$(MOZ_OBJDIR); \
done
endif
endif # MOZ_CURRENT_PROJECT
####################################
# Postflight, after building all projects
build alldep postflight_all::
ifeq (,$(MOZ_CURRENT_PROJECT)$(if $(MOZ_POSTFLIGHT_ALL),,1))
# Don't run postflight_all for individual projects in multi-project builds
# (when MOZ_CURRENT_PROJECT is set.)
ifndef MOZ_BUILD_PROJECTS
# Building a single project, OBJDIR is usable.
set -e; \
for mkfile in $(MOZ_POSTFLIGHT_ALL); do \
$(MAKE) -f $(TOPSRCDIR)/$$mkfile postflight_all TOPSRCDIR=$(TOPSRCDIR) OBJDIR=$(OBJDIR) MOZ_OBJDIR=$(MOZ_OBJDIR); \
done
else
# OBJDIR refers to the project-specific OBJDIR, which is not available at
# this point when building multiple projects. Only MOZ_OBJDIR is available.
set -e; \
for mkfile in $(MOZ_POSTFLIGHT_ALL); do \
$(MAKE) -f $(TOPSRCDIR)/$$mkfile postflight_all TOPSRCDIR=$(TOPSRCDIR) MOZ_OBJDIR=$(MOZ_OBJDIR) MOZ_BUILD_PROJECTS="$(MOZ_BUILD_PROJECTS)"; \
done
endif
endif
cleansrcdir:
@cd $(TOPSRCDIR); \
if [ -f Makefile ]; then \
$(MAKE) distclean ; \
else \
echo "Removing object files from srcdir..."; \
rm -fr `find . -type d \( -name .deps -print -o -name CVS \
-o -exec test ! -d {}/CVS \; \) -prune \
-o \( -name '*.[ao]' -o -name '*.so' \) -type f -print`; \
build/autoconf/clean-config.sh; \
fi;
echo-variable-%:
@echo $($*)
.PHONY: checkout real_checkout depend build profiledbuild maybe_clobber_profiledbuild export libs alldep install clean realclean distclean cleansrcdir pull_all build_all clobber clobber_all pull_and_build_all everything configure preflight_all preflight postflight postflight_all