gecko-dev/gfx/2d/DrawTargetD2D.h

/* -*- Mode: C++; tab-width: 20; indent-tabs-mode: nil; c-basic-offset: 2 -*-
 * ***** BEGIN LICENSE BLOCK *****
 * Version: MPL 1.1/GPL 2.0/LGPL 2.1
 *
 * The contents of this file are subject to the Mozilla Public License Version
 * 1.1 (the "License"); you may not use this file except in compliance with
 * the License. You may obtain a copy of the License at
 * http://www.mozilla.org/MPL/
 *
 * Software distributed under the License is distributed on an "AS IS" basis,
 * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
 * for the specific language governing rights and limitations under the
 * License.
 *
 * The Original Code is Mozilla Corporation code.
 *
 * The Initial Developer of the Original Code is Mozilla Foundation.
 * Portions created by the Initial Developer are Copyright (C) 2011
 * the Initial Developer. All Rights Reserved.
 *
 * Contributor(s):
 *   Bas Schouten <bschouten@mozilla.com>
 *
 * Alternatively, the contents of this file may be used under the terms of
 * either the GNU General Public License Version 2 or later (the "GPL"), or
 * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
 * in which case the provisions of the GPL or the LGPL are applicable instead
 * of those above. If you wish to allow use of your version of this file only
 * under the terms of either the GPL or the LGPL, and not to allow others to
 * use your version of this file under the terms of the MPL, indicate your
 * decision by deleting the provisions above and replace them with the notice
 * and other provisions required by the GPL or the LGPL. If you do not delete
 * the provisions above, a recipient may use your version of this file under
 * the terms of any one of the MPL, the GPL or the LGPL.
 *
 * ***** END LICENSE BLOCK ***** */

#ifndef MOZILLA_GFX_DRAWTARGETD2D_H_
#define MOZILLA_GFX_DRAWTARGETD2D_H_

#include "2D.h"
#include "PathD2D.h"
#include <d3d10_1.h>
#include "HelpersD2D.h"

#include <vector>
#include <sstream>

#ifdef _MSC_VER
#include <hash_set>
#else
#include <unordered_set>
#endif

namespace mozilla {
namespace gfx {

class SourceSurfaceD2DTarget;
class SourceSurfaceD2D;
class GradientStopsD2D;

struct PrivateD3D10DataD2D
{
  RefPtr<ID3D10Effect> mEffect;
  RefPtr<ID3D10InputLayout> mInputLayout;
  RefPtr<ID3D10Buffer> mVB;
  RefPtr<ID3D10BlendState> mBlendStates[OP_COUNT];
};

class DrawTargetD2D : public DrawTarget
{
public:
  DrawTargetD2D();
  virtual ~DrawTargetD2D();

  virtual BackendType GetType() const { return BACKEND_DIRECT2D; }
  virtual TemporaryRef<SourceSurface> Snapshot();
  virtual IntSize GetSize() { return mSize; }

  virtual void Flush();
  virtual void DrawSurface(SourceSurface *aSurface,
                           const Rect &aDest,
                           const Rect &aSource,
                           const DrawSurfaceOptions &aSurfOptions = DrawSurfaceOptions(),
                           const DrawOptions &aOptions = DrawOptions());
  virtual void DrawSurfaceWithShadow(SourceSurface *aSurface,
                                     const Point &aDest,
                                     const Color &aColor,
                                     const Point &aOffset,
                                     Float aSigma,
                                     CompositionOp aOperator);
  virtual void ClearRect(const Rect &aRect);

  virtual void CopySurface(SourceSurface *aSurface,
                           const IntRect &aSourceRect,
                           const IntPoint &aDestination);

  virtual void FillRect(const Rect &aRect,
                        const Pattern &aPattern,
                        const DrawOptions &aOptions = DrawOptions());
  virtual void StrokeRect(const Rect &aRect,
                          const Pattern &aPattern,
                          const StrokeOptions &aStrokeOptions = StrokeOptions(),
                          const DrawOptions &aOptions = DrawOptions());
  virtual void StrokeLine(const Point &aStart,
                          const Point &aEnd,
                          const Pattern &aPattern,
                          const StrokeOptions &aStrokeOptions = StrokeOptions(),
                          const DrawOptions &aOptions = DrawOptions());
  virtual void Stroke(const Path *aPath,
                      const Pattern &aPattern,
                      const StrokeOptions &aStrokeOptions = StrokeOptions(),
                      const DrawOptions &aOptions = DrawOptions());
  virtual void Fill(const Path *aPath,
                    const Pattern &aPattern,
                    const DrawOptions &aOptions = DrawOptions());
  virtual void FillGlyphs(ScaledFont *aFont,
                          const GlyphBuffer &aBuffer,
                          const Pattern &aPattern,
                          const DrawOptions &aOptions = DrawOptions());
  virtual void Mask(const Pattern &aSource,
                    const Pattern &aMask,
                    const DrawOptions &aOptions = DrawOptions());
  virtual void PushClip(const Path *aPath);
  virtual void PushClipRect(const Rect &aRect);
  virtual void PopClip();

  virtual TemporaryRef<SourceSurface> CreateSourceSurfaceFromData(unsigned char *aData,
                                                            const IntSize &aSize,
                                                            int32_t aStride,
                                                            SurfaceFormat aFormat) const;
  virtual TemporaryRef<SourceSurface> OptimizeSourceSurface(SourceSurface *aSurface) const;

  virtual TemporaryRef<SourceSurface>
    CreateSourceSurfaceFromNativeSurface(const NativeSurface &aSurface) const;
  
  virtual TemporaryRef<DrawTarget>
    CreateSimilarDrawTarget(const IntSize &aSize, SurfaceFormat aFormat) const;

  virtual TemporaryRef<PathBuilder> CreatePathBuilder(FillRule aFillRule = FILL_WINDING) const;

  virtual TemporaryRef<GradientStops>
    CreateGradientStops(GradientStop *aStops,
                        uint32_t aNumStops,
                        ExtendMode aExtendMode = EXTEND_CLAMP) const;

  virtual void *GetNativeSurface(NativeSurfaceType aType);

  bool Init(const IntSize &aSize, SurfaceFormat aFormat);
  bool Init(ID3D10Texture2D *aTexture, SurfaceFormat aFormat);
  bool InitD3D10Data();

  static ID2D1Factory *factory();
  static TemporaryRef<ID2D1StrokeStyle> CreateStrokeStyleForOptions(const StrokeOptions &aStrokeOptions);

  operator std::string() const {
    std::stringstream stream;
    stream << "DrawTargetD2D(" << this << ")";
    return stream.str();
  }
private:
  friend class AutoSaveRestoreClippedOut;
  friend class SourceSurfaceD2DTarget;

#ifdef _MSC_VER
  typedef stdext::hash_set<DrawTargetD2D*> TargetSet;
#else
  typedef std::unordered_set<DrawTargetD2D*> TargetSet;
#endif

  bool InitD2DRenderTarget();
  void PrepareForDrawing(ID2D1RenderTarget *aRT);

  // This function will mark the surface as changing, and make sure any
  // copy-on-write snapshots are notified.
  void MarkChanged();
  void FlushTransformToRT() {
    if (mTransformDirty) {
      mRT->SetTransform(D2DMatrix(mTransform));
      mTransformDirty = false;
    }
  }
  void AddDependencyOnSource(SourceSurfaceD2DTarget* aSource);

  ID3D10BlendState *GetBlendStateForOperator(CompositionOp aOperator);
  ID2D1RenderTarget *GetRTForOperation(CompositionOp aOperator, const Pattern &aPattern);
  void FinalizeRTForOperation(CompositionOp aOperator, const Pattern &aPattern, const Rect &aBounds);  void EnsureViews();
  void PopAllClips();

  TemporaryRef<ID2D1RenderTarget> CreateRTForTexture(ID3D10Texture2D *aTexture);
  TemporaryRef<ID2D1Geometry> GetClippedGeometry();

  TemporaryRef<ID2D1Brush> CreateBrushForPattern(const Pattern &aPattern, Float aAlpha = 1.0f);

  TemporaryRef<ID3D10Texture1D> CreateGradientTexture(const GradientStopsD2D *aStops);

  // This creates a partially uploaded bitmap for a SourceSurfaceD2D that is
  // too big to fit in a bitmap. It adjusts the passed Matrix to accomodate the
  // partial upload.
  TemporaryRef<ID2D1Bitmap> CreatePartialBitmapForSurface(SourceSurfaceD2D *aSurface, Matrix &aMatrix);

  void SetupEffectForRadialGradient(const RadialGradientPattern *aPattern);

  static const uint32_t test = 4;

  IntSize mSize;

  RefPtr<ID3D10Device1> mDevice;
  RefPtr<ID3D10Texture2D> mTexture;
  mutable RefPtr<ID2D1RenderTarget> mRT;

  // Temporary texture and render target used for supporting alternative operators.
  RefPtr<ID3D10Texture2D> mTempTexture;
  RefPtr<ID3D10RenderTargetView> mRTView;
  RefPtr<ID3D10ShaderResourceView> mSRView;
  RefPtr<ID2D1RenderTarget> mTempRT;
  RefPtr<ID3D10RenderTargetView> mTempRTView;

  // List of pushed clips.
  struct PushedClip
  {
    RefPtr<ID2D1Layer> mLayer;
    D2D1_RECT_F mBounds;
    D2D1_MATRIX_3X2_F mTransform;
    RefPtr<PathD2D> mPath;
  };
  std::vector<PushedClip> mPushedClips;
  
  // The latest snapshot of this surface. This needs to be told when this
  // target is modified. We keep it alive as a cache.
  RefPtr<SourceSurfaceD2DTarget> mSnapshot;
  // A list of targets we need to flush when we're modified.
  TargetSet mDependentTargets;
  // A list of targets which have this object in their mDependentTargets set
  TargetSet mDependingOnTargets;

  // True of the current clip stack is pushed to the main RT.
  bool mClipsArePushed;
  PrivateD3D10DataD2D *mPrivateData;
  static ID2D1Factory *mFactory;
};

}
}

#endif /* MOZILLA_GFX_DRAWTARGETD2D_H_ */