gecko-dev/gfx/2d/PathCG.cpp

274 строки
7.6 KiB
C++

/* -*- Mode: C++; tab-width: 20; indent-tabs-mode: nil; c-basic-offset: 2 -*-
* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is Mozilla Corporation code.
*
* The Initial Developer of the Original Code is Mozilla Foundation.
* Portions created by the Initial Developer are Copyright (C) 2011
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
* Bas Schouten <bschouten@mozilla.com>
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
#include "PathCG.h"
#include <math.h>
#include "DrawTargetCG.h"
#include "Logging.h"
namespace mozilla {
namespace gfx {
PathBuilderCG::~PathBuilderCG()
{
CGPathRelease(mCGPath);
}
void
PathBuilderCG::MoveTo(const Point &aPoint)
{
CGPathMoveToPoint(mCGPath, NULL, aPoint.x, aPoint.y);
}
void
PathBuilderCG::LineTo(const Point &aPoint)
{
if (CGPathIsEmpty(mCGPath))
MoveTo(aPoint);
else
CGPathAddLineToPoint(mCGPath, NULL, aPoint.x, aPoint.y);
}
void
PathBuilderCG::BezierTo(const Point &aCP1,
const Point &aCP2,
const Point &aCP3)
{
if (CGPathIsEmpty(mCGPath))
MoveTo(aCP1);
else
CGPathAddCurveToPoint(mCGPath, NULL,
aCP1.x, aCP1.y,
aCP2.x, aCP2.y,
aCP3.x, aCP3.y);
}
void
PathBuilderCG::QuadraticBezierTo(const Point &aCP1,
const Point &aCP2)
{
if (CGPathIsEmpty(mCGPath))
MoveTo(aCP1);
else
CGPathAddQuadCurveToPoint(mCGPath, NULL,
aCP1.x, aCP1.y,
aCP2.x, aCP2.y);
}
void
PathBuilderCG::Close()
{
if (!CGPathIsEmpty(mCGPath))
CGPathCloseSubpath(mCGPath);
}
void
PathBuilderCG::Arc(const Point &aOrigin, Float aRadius, Float aStartAngle,
Float aEndAngle, bool aAntiClockwise)
{
}
Point
PathBuilderCG::CurrentPoint() const
{
CGPoint pt = CGPathGetCurrentPoint(mCGPath);
Point ret(pt.x, pt.y);
return ret;
}
void
PathBuilderCG::EnsureActive(const Point &aPoint)
{
}
TemporaryRef<Path>
PathBuilderCG::Finish()
{
RefPtr<PathCG> path = new PathCG(mCGPath, mFillRule);
return path;
}
TemporaryRef<PathBuilder>
PathCG::CopyToBuilder(FillRule aFillRule) const
{
CGMutablePathRef path = CGPathCreateMutableCopy(mPath);
RefPtr<PathBuilderCG> builder = new PathBuilderCG(path, aFillRule);
return builder;
}
TemporaryRef<PathBuilder>
PathCG::TransformedCopyToBuilder(const Matrix &aTransform, FillRule aFillRule) const
{
// 10.7 adds CGPathCreateMutableCopyByTransformingPath it might be faster than doing
// this by hand
struct TransformApplier {
CGMutablePathRef path;
CGAffineTransform transform;
static void
TranformCGPathApplierFunc(void *vinfo, const CGPathElement *element)
{
TransformApplier *info = reinterpret_cast<TransformApplier*>(vinfo);
switch (element->type) {
case kCGPathElementMoveToPoint:
{
CGPoint pt = element->points[0];
CGPathMoveToPoint(info->path, &info->transform, pt.x, pt.y);
break;
}
case kCGPathElementAddLineToPoint:
{
CGPoint pt = element->points[0];
CGPathAddLineToPoint(info->path, &info->transform, pt.x, pt.y);
break;
}
case kCGPathElementAddQuadCurveToPoint:
{
CGPoint pt = element->points[0];
CGPoint cpt = element->points[1];
CGPathAddQuadCurveToPoint(info->path, &info->transform, cpt.x, cpt.y, pt.x, pt.y);
break;
}
case kCGPathElementAddCurveToPoint:
{
CGPoint pt = element->points[0];
CGPoint cpt1 = element->points[1];
CGPoint cpt2 = element->points[2];
CGPathAddCurveToPoint(info->path, &info->transform, cpt1.x, cpt1.y, cpt2.x, cpt2.y, pt.x, pt.y);
break;
}
case kCGPathElementCloseSubpath:
{
CGPathCloseSubpath(info->path);
break;
}
}
}
};
TransformApplier ta;
ta.path = CGPathCreateMutable();
ta.transform = GfxMatrixToCGAffineTransform(aTransform);
CGPathApply(mPath, &ta, TransformApplier::TranformCGPathApplierFunc);
RefPtr<PathBuilderCG> builder = new PathBuilderCG(ta.path, aFillRule);
return builder;
}
bool
PathCG::ContainsPoint(const Point &aPoint, const Matrix &aTransform) const
{
Matrix inverse = aTransform;
inverse.Invert();
Point transformedPoint = inverse*aPoint;
// We could probably drop the input transform and just transform the point at the caller?
CGPoint point = {transformedPoint.x, transformedPoint.y};
// The transform parameter of CGPathContainsPoint doesn't seem to work properly on OS X 10.5
// so we transform aPoint ourselves.
return CGPathContainsPoint(mPath, NULL, point, mFillRule == FILL_EVEN_ODD);
}
static size_t
PutBytesNull(void *info, const void *buffer, size_t count)
{
return count;
}
/* The idea of a scratch context comes from WebKit */
static CGContextRef
CreateScratchContext()
{
CGDataConsumerCallbacks callbacks = {PutBytesNull, NULL};
CGDataConsumerRef consumer = CGDataConsumerCreate(NULL, &callbacks);
CGContextRef cg = CGPDFContextCreate(consumer, NULL, NULL);
CGDataConsumerRelease(consumer);
return cg;
}
static CGContextRef
ScratchContext()
{
static CGContextRef cg = CreateScratchContext();
return cg;
}
//XXX: what should these functions return for an empty path?
// currently they return CGRectNull {inf,inf, 0, 0}
Rect
PathCG::GetBounds(const Matrix &aTransform) const
{
//XXX: are these bounds tight enough
Rect bounds = CGRectToRect(CGPathGetBoundingBox(mPath));
//XXX: curretnly this returns the bounds of the transformed bounds
// this is strictly looser than the bounds of the transformed path
return aTransform.TransformBounds(bounds);
}
Rect
PathCG::GetStrokedBounds(const StrokeOptions &aStrokeOptions,
const Matrix &aTransform) const
{
// 10.7 has CGPathCreateCopyByStrokingPath which we could use
// instead of this scratch context business
CGContextRef cg = ScratchContext();
CGContextSaveGState(cg);
CGContextBeginPath(cg);
CGContextAddPath(cg, mPath);
SetStrokeOptions(cg, aStrokeOptions);
CGContextReplacePathWithStrokedPath(cg);
Rect bounds = CGRectToRect(CGContextGetPathBoundingBox(cg));
CGContextRestoreGState(cg);
return aTransform.TransformBounds(bounds);
}
}
}