gecko-dev/testing/sisyphus/bin/test-setup.sh

267 строки
8.8 KiB
Bash
Executable File

#!/bin/bash -e
# -*- Mode: Shell-script; tab-width: 4; indent-tabs-mode: nil; -*-
# ***** BEGIN LICENSE BLOCK *****
# Version: MPL 1.1/GPL 2.0/LGPL 2.1
#
# The contents of this file are subject to the Mozilla Public License Version
# 1.1 (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
# http://www.mozilla.org/MPL/
#
# Software distributed under the License is distributed on an "AS IS" basis,
# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
# for the specific language governing rights and limitations under the
# License.
#
# The Original Code is mozilla.org code.
#
# The Initial Developer of the Original Code is
# Mozilla Corporation.
# Portions created by the Initial Developer are Copyright (C) 2006.
# the Initial Developer. All Rights Reserved.
#
# Contributor(s):
# Bob Clary <bob@bclary.com>
#
# Alternatively, the contents of this file may be used under the terms of
# either the GNU General Public License Version 2 or later (the "GPL"), or
# the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
# in which case the provisions of the GPL or the LGPL are applicable instead
# of those above. If you wish to allow use of your version of this file only
# under the terms of either the GPL or the LGPL, and not to allow others to
# use your version of this file under the terms of the MPL, indicate your
# decision by deleting the provisions above and replace them with the notice
# and other provisions required by the GPL or the LGPL. If you do not delete
# the provisions above, a recipient may use your version of this file under
# the terms of any one of the MPL, the GPL or the LGPL.
#
# ***** END LICENSE BLOCK *****
source $TEST_DIR/bin/library.sh
#
# options processing
#
options="p:b:u:f:c:B:T:x:N:D:L:U:E:d:"
function usage()
{
cat<<EOF
usage:
$SCRIPT -p product -b branch
[-u url [-f filepath] [-c credentials]]
[-B buildcommands -T buildtype]
[-x executablepath]
[-N profilename [-D profiledirectory [-L profiletemplate
[-U userpreferences]]]]
[-E extensiondir]
[-d datafiles]
variable description
=============== ===========================================================
-p product required. one of js firefox.
-b branch required. supported branch. see library.sh
-u url optional. url where to download build
-f filepath optional. location to save downloaded build or to find
previously downloaded build. If not specified, the
default will be the basename of the url saved to the
/tmp directory. If there is no basename, then the
filepath will be /tmp/\$product-\$branch-file.
-B buildcommands optional. one or more of clean checkout build
-T buildtype optional. one of opt debug
-x executablepath optional. directory tree containing executable with same
name as product. If the build is downloaded and executable
path is not specified, it will be defaulted to
/tmp/\$product-\$branch.
For cvs builds it will be defaulted to the appropriate
directory in
${BUILDDIR}/\$branch/mozilla/\$product-\$buildtype/
-N profilename optional. profilename. profilename is required if
profiledirectory or extensiondir are specified.
-D profiledirectory optional. If profiledirectory is specified, a new profile
will be created in the directory.
-L profiletemplate optional. If a new profile is created, profiletemplate is
the path to an existing profile which will be copied over
the new profile.
-U userpreferences optional. If a new profile is created, userpreferences is
the path to a user.js file to be copied into the new
profile.
If userpreferences is not specified when a new profile is
created, it is defaulted to
${TEST_DIR}/prefs/test-user.js
-E extensiondir optional. path to directory tree containing extensions to
be installed.
-d datafiles optional. one or more filenames of files containing
environment variable definitions to be included.
note that the environment variables should have the same
names as in the "variable" column.
EOF
exit 1
}
unset product branch url filepath credentials buildcommands buildtype executablepath profilename profiledirectory profiletemplate userpreferences extenstiondir datafiles
while getopts $options optname ;
do
case $optname in
p) product="$OPTARG";;
b) branch="$OPTARG";;
u) url="$OPTARG";;
f) filepath="$OPTARG";;
c) credentials="$OPTARG";;
B) buildcommands="$OPTARG";;
T) buildtype="$OPTARG";;
x) executablepath="$OPTARG";;
N) profilename="$OPTARG";;
D) profiledirectory="$OPTARG";;
L) profiletemplate="$OPTARG";;
U) userpreferences="$OPTARG";;
E) extensiondir="$OPTARG";;
d) datafiles="$OPTARG";;
esac
done
# include environment variables
loaddata $datafiles
TEST_PRODUCT=$product
TEST_BRANCH=$branch
TEST_BUILDCOMMANDS=$buildcommands
TEST_BUILDTYPE=$buildtype
TEST_EXECUTABLEPATH=$executablepath
if [[ -n "$profilename" ]]; then
TEST_PROFILENAME=$profilename
fi
if [[ -n "$profiletemplate" ]];then
TEST_PROFILETEMPLATE=$profiletemplate
fi
if [[ -n "$userpreferences" ]]; then
TEST_USERPREFERENCES=$userpreferences
fi
if [[ -n "$extensiondir" ]]; then
TEST_EXTENSIONDIR=$extensiondir
fi
TEST_DATAFILES=$datafiles
dumpenvironment
dumphardware
if [[ -z "$product" || -z "$branch" ]]; then
echo "product and branch are required"
usage
fi
checkProductBranch $product $branch
if [[ ( -n "$url" || -n "$filepath" ) && ( -n "$buildcommands" ) ]]; then
echo "you can not both download and build cvs builds at the same time"
usage
fi
if [[ -n "$buildcommands" && -n "$executablepath" ]]; then
echo "You can not specify the executable path and build cvs builds at the same time"
usage
fi
if [[ (-n "$profiledirectory" || -n "$extensiondir" ) && -z "$profilename" ]]; then
echo "You must specify a profilename if you specify a profiledirectory or extensiondir"
usage
fi
# if the url is specified but not the filepath
# generate a default path where to save the
# downloaded build.
if [[ -n "$url" && -z "$filepath" ]]; then
filepath=`basename $url`
if [[ -z "$filepath" ]]; then
filepath="$product-$branch-file"
fi
filepath="/tmp/$filepath"
fi
if [[ -n "$url" ]]; then
download.sh -u "$url" -c "$credentials" -f "$filepath" -t "$TEST_DOWNLOAD_TIMEOUT"
fi
# install the build at the specified filepath
if [[ -n "$filepath" ]]; then
if [[ -z "$executablepath" ]]; then
executablepath="/tmp/$product-$branch"
fi
install-build.sh -p $product -b $branch -x $executablepath -f $filepath
fi
if [[ -n "$buildcommands" ]]; then
if [[ -z "$buildtype" ]]; then
echo "You must specify a buildtype if you are building from cvs"
usage
elif [[ "$buildtype" != "opt" && "$buildtype" != "debug" ]]; then
echo "buildtype must be one of opt debug"
usage
fi
case "$OSID" in
mac)
if [[ "$product" == "firefox" ]]; then
App=Firefox
fi
if [[ "$buildtype" == "debug" ]]; then
AppType=Debug
fi
executablepath="${BUILDDIR}/$branch/mozilla/$product-$buildtype/dist/$App$AppType.app/Contents/MacOS"
;;
*)
executablepath="${BUILDDIR}/$branch/mozilla/$product/$buildtype/dist/bin"
esac
if echo "$buildcommands" | grep -iq clean; then
clean.sh -p $product -b $branch -t $buildtype
fi
if echo "$buildcommands" | grep -iq checkout; then
checkout.sh -p $product -b $branch -t $buildtype
fi
if echo "$buildcommands" | grep -iq build; then
build.sh -p $product -b $branch -t $buildtype
fi
fi
if [[ -n "$profiledirectory" ]]; then
if [[ -z "$userpreferences" ]]; then
userpreferences=${TEST_DIR}/prefs/test-user.js
fi
unset optargs
if [[ -n "$profiletemplate" ]]; then
optargs="$optargs -L $profiletemplate"
fi
if [[ -n "$userpreferences" ]]; then
optargs="$optargs -U $userpreferences"
fi
create-profile.sh -p $product -b $branch \
-x $executablepath -D $profiledirectory -N $profilename \
$optargs
fi
if [[ -n "$extensiondir" ]]; then
install-extensions.sh -p $product -b $branch \
-x $executablepath -N $profilename -E $extensiondir
check-spider.sh -p $product -b $branch \
-x $executablepath -N $profilename
fi